usb: dwc2: move debugfs code to a separate file
Prepare to add more debug code. Moreover, don't save dentry * for
each file in struct dwc2_hsotg as clean up is done with
debugfs_remove_recursive(). s3c_hsotg_delete_debug() is removed
altogether for the same reason.
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/dwc2/debugfs.c b/drivers/usb/dwc2/debugfs.c
new file mode 100644
index 0000000..e57e554
--- /dev/null
+++ b/drivers/usb/dwc2/debugfs.c
@@ -0,0 +1,416 @@
+/**
+ * debugfs.c - Designware USB2 DRD controller debugfs
+ *
+ * Copyright (C) 2015 Intel Corporation
+ * Mian Yousaf Kaukab <yousaf.kaukab@intel.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+
+#include "core.h"
+#include "debug.h"
+
+#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
+ IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
+/**
+ * testmode_write - debugfs: change usb test mode
+ * @seq: The seq file to write to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry modify the current usb test mode.
+ */
+static ssize_t testmode_write(struct file *file, const char __user *ubuf, size_t
+ count, loff_t *ppos)
+{
+ struct seq_file *s = file->private_data;
+ struct dwc2_hsotg *hsotg = s->private;
+ unsigned long flags;
+ u32 testmode = 0;
+ char buf[32];
+
+ if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count)))
+ return -EFAULT;
+
+ if (!strncmp(buf, "test_j", 6))
+ testmode = TEST_J;
+ else if (!strncmp(buf, "test_k", 6))
+ testmode = TEST_K;
+ else if (!strncmp(buf, "test_se0_nak", 12))
+ testmode = TEST_SE0_NAK;
+ else if (!strncmp(buf, "test_packet", 11))
+ testmode = TEST_PACKET;
+ else if (!strncmp(buf, "test_force_enable", 17))
+ testmode = TEST_FORCE_EN;
+ else
+ testmode = 0;
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+ s3c_hsotg_set_test_mode(hsotg, testmode);
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+ return count;
+}
+
+/**
+ * testmode_show - debugfs: show usb test mode state
+ * @seq: The seq file to write to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows which usb test mode is currently enabled.
+ */
+static int testmode_show(struct seq_file *s, void *unused)
+{
+ struct dwc2_hsotg *hsotg = s->private;
+ unsigned long flags;
+ int dctl;
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+ dctl = readl(hsotg->regs + DCTL);
+ dctl &= DCTL_TSTCTL_MASK;
+ dctl >>= DCTL_TSTCTL_SHIFT;
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ switch (dctl) {
+ case 0:
+ seq_puts(s, "no test\n");
+ break;
+ case TEST_J:
+ seq_puts(s, "test_j\n");
+ break;
+ case TEST_K:
+ seq_puts(s, "test_k\n");
+ break;
+ case TEST_SE0_NAK:
+ seq_puts(s, "test_se0_nak\n");
+ break;
+ case TEST_PACKET:
+ seq_puts(s, "test_packet\n");
+ break;
+ case TEST_FORCE_EN:
+ seq_puts(s, "test_force_enable\n");
+ break;
+ default:
+ seq_printf(s, "UNKNOWN %d\n", dctl);
+ }
+
+ return 0;
+}
+
+static int testmode_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, testmode_show, inode->i_private);
+}
+
+static const struct file_operations testmode_fops = {
+ .owner = THIS_MODULE,
+ .open = testmode_open,
+ .write = testmode_write,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/**
+ * state_show - debugfs: show overall driver and device state.
+ * @seq: The seq file to write to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the overall state of the hardware and
+ * some general information about each of the endpoints available
+ * to the system.
+ */
+static int state_show(struct seq_file *seq, void *v)
+{
+ struct dwc2_hsotg *hsotg = seq->private;
+ void __iomem *regs = hsotg->regs;
+ int idx;
+
+ seq_printf(seq, "DCFG=0x%08x, DCTL=0x%08x, DSTS=0x%08x\n",
+ readl(regs + DCFG),
+ readl(regs + DCTL),
+ readl(regs + DSTS));
+
+ seq_printf(seq, "DIEPMSK=0x%08x, DOEPMASK=0x%08x\n",
+ readl(regs + DIEPMSK), readl(regs + DOEPMSK));
+
+ seq_printf(seq, "GINTMSK=0x%08x, GINTSTS=0x%08x\n",
+ readl(regs + GINTMSK),
+ readl(regs + GINTSTS));
+
+ seq_printf(seq, "DAINTMSK=0x%08x, DAINT=0x%08x\n",
+ readl(regs + DAINTMSK),
+ readl(regs + DAINT));
+
+ seq_printf(seq, "GNPTXSTS=0x%08x, GRXSTSR=%08x\n",
+ readl(regs + GNPTXSTS),
+ readl(regs + GRXSTSR));
+
+ seq_puts(seq, "\nEndpoint status:\n");
+
+ for (idx = 0; idx < hsotg->num_of_eps; idx++) {
+ u32 in, out;
+
+ in = readl(regs + DIEPCTL(idx));
+ out = readl(regs + DOEPCTL(idx));
+
+ seq_printf(seq, "ep%d: DIEPCTL=0x%08x, DOEPCTL=0x%08x",
+ idx, in, out);
+
+ in = readl(regs + DIEPTSIZ(idx));
+ out = readl(regs + DOEPTSIZ(idx));
+
+ seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
+ in, out);
+
+ seq_puts(seq, "\n");
+ }
+
+ return 0;
+}
+
+static int state_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, state_show, inode->i_private);
+}
+
+static const struct file_operations state_fops = {
+ .owner = THIS_MODULE,
+ .open = state_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/**
+ * fifo_show - debugfs: show the fifo information
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * Show the FIFO information for the overall fifo and all the
+ * periodic transmission FIFOs.
+ */
+static int fifo_show(struct seq_file *seq, void *v)
+{
+ struct dwc2_hsotg *hsotg = seq->private;
+ void __iomem *regs = hsotg->regs;
+ u32 val;
+ int idx;
+
+ seq_puts(seq, "Non-periodic FIFOs:\n");
+ seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ));
+
+ val = readl(regs + GNPTXFSIZ);
+ seq_printf(seq, "NPTXFIFO: Size %d, Start 0x%08x\n",
+ val >> FIFOSIZE_DEPTH_SHIFT,
+ val & FIFOSIZE_DEPTH_MASK);
+
+ seq_puts(seq, "\nPeriodic TXFIFOs:\n");
+
+ for (idx = 1; idx < hsotg->num_of_eps; idx++) {
+ val = readl(regs + DPTXFSIZN(idx));
+
+ seq_printf(seq, "\tDPTXFIFO%2d: Size %d, Start 0x%08x\n", idx,
+ val >> FIFOSIZE_DEPTH_SHIFT,
+ val & FIFOSIZE_STARTADDR_MASK);
+ }
+
+ return 0;
+}
+
+static int fifo_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, fifo_show, inode->i_private);
+}
+
+static const struct file_operations fifo_fops = {
+ .owner = THIS_MODULE,
+ .open = fifo_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static const char *decode_direction(int is_in)
+{
+ return is_in ? "in" : "out";
+}
+
+/**
+ * ep_show - debugfs: show the state of an endpoint.
+ * @seq: The seq_file to write data to.
+ * @v: Unused parameter.
+ *
+ * This debugfs entry shows the state of the given endpoint (one is
+ * registered for each available).
+ */
+static int ep_show(struct seq_file *seq, void *v)
+{
+ struct s3c_hsotg_ep *ep = seq->private;
+ struct dwc2_hsotg *hsotg = ep->parent;
+ struct s3c_hsotg_req *req;
+ void __iomem *regs = hsotg->regs;
+ int index = ep->index;
+ int show_limit = 15;
+ unsigned long flags;
+
+ seq_printf(seq, "Endpoint index %d, named %s, dir %s:\n",
+ ep->index, ep->ep.name, decode_direction(ep->dir_in));
+
+ /* first show the register state */
+
+ seq_printf(seq, "\tDIEPCTL=0x%08x, DOEPCTL=0x%08x\n",
+ readl(regs + DIEPCTL(index)),
+ readl(regs + DOEPCTL(index)));
+
+ seq_printf(seq, "\tDIEPDMA=0x%08x, DOEPDMA=0x%08x\n",
+ readl(regs + DIEPDMA(index)),
+ readl(regs + DOEPDMA(index)));
+
+ seq_printf(seq, "\tDIEPINT=0x%08x, DOEPINT=0x%08x\n",
+ readl(regs + DIEPINT(index)),
+ readl(regs + DOEPINT(index)));
+
+ seq_printf(seq, "\tDIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x\n",
+ readl(regs + DIEPTSIZ(index)),
+ readl(regs + DOEPTSIZ(index)));
+
+ seq_puts(seq, "\n");
+ seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
+ seq_printf(seq, "total_data=%ld\n", ep->total_data);
+
+ seq_printf(seq, "request list (%p,%p):\n",
+ ep->queue.next, ep->queue.prev);
+
+ spin_lock_irqsave(&hsotg->lock, flags);
+
+ list_for_each_entry(req, &ep->queue, queue) {
+ if (--show_limit < 0) {
+ seq_puts(seq, "not showing more requests...\n");
+ break;
+ }
+
+ seq_printf(seq, "%c req %p: %d bytes @%p, ",
+ req == ep->req ? '*' : ' ',
+ req, req->req.length, req->req.buf);
+ seq_printf(seq, "%d done, res %d\n",
+ req->req.actual, req->req.status);
+ }
+
+ spin_unlock_irqrestore(&hsotg->lock, flags);
+
+ return 0;
+}
+
+static int ep_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ep_show, inode->i_private);
+}
+
+static const struct file_operations ep_fops = {
+ .owner = THIS_MODULE,
+ .open = ep_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/**
+ * s3c_hsotg_create_debug - create debugfs directory and files
+ * @hsotg: The driver state
+ *
+ * Create the debugfs files to allow the user to get information
+ * about the state of the system. The directory name is created
+ * with the same name as the device itself, in case we end up
+ * with multiple blocks in future systems.
+ */
+static void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg)
+{
+ struct dentry *root;
+ struct dentry *file;
+ unsigned epidx;
+
+ root = hsotg->debug_root;
+
+ /* create general state file */
+
+ file = debugfs_create_file("state", S_IRUGO, root, hsotg, &state_fops);
+ if (IS_ERR(file))
+ dev_err(hsotg->dev, "%s: failed to create state\n", __func__);
+
+ file = debugfs_create_file("testmode", S_IRUGO | S_IWUSR, root, hsotg,
+ &testmode_fops);
+ if (IS_ERR(file))
+ dev_err(hsotg->dev, "%s: failed to create testmode\n",
+ __func__);
+
+ file = debugfs_create_file("fifo", S_IRUGO, root, hsotg, &fifo_fops);
+ if (IS_ERR(file))
+ dev_err(hsotg->dev, "%s: failed to create fifo\n", __func__);
+
+ /* Create one file for each out endpoint */
+ for (epidx = 0; epidx < hsotg->num_of_eps; epidx++) {
+ struct s3c_hsotg_ep *ep;
+
+ ep = hsotg->eps_out[epidx];
+ if (ep) {
+ file = debugfs_create_file(ep->name, S_IRUGO,
+ root, ep, &ep_fops);
+ if (IS_ERR(file))
+ dev_err(hsotg->dev, "failed to create %s debug file\n",
+ ep->name);
+ }
+ }
+ /* Create one file for each in endpoint. EP0 is handled with out eps */
+ for (epidx = 1; epidx < hsotg->num_of_eps; epidx++) {
+ struct s3c_hsotg_ep *ep;
+
+ ep = hsotg->eps_in[epidx];
+ if (ep) {
+ file = debugfs_create_file(ep->name, S_IRUGO,
+ root, ep, &ep_fops);
+ if (IS_ERR(file))
+ dev_err(hsotg->dev, "failed to create %s debug file\n",
+ ep->name);
+ }
+ }
+}
+#else
+static inline void s3c_hsotg_create_debug(struct dwc2_hsotg *hsotg) {}
+#endif
+
+/* s3c_hsotg_delete_debug is removed as cleanup in done in dwc2_debugfs_exit */
+
+int dwc2_debugfs_init(struct dwc2_hsotg *hsotg)
+{
+ int ret;
+
+ hsotg->debug_root = debugfs_create_dir(dev_name(hsotg->dev), NULL);
+ if (!hsotg->debug_root) {
+ ret = -ENOMEM;
+ goto err0;
+ }
+
+ /* Add gadget debugfs nodes */
+ s3c_hsotg_create_debug(hsotg);
+err0:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dwc2_debugfs_init);
+
+void dwc2_debugfs_exit(struct dwc2_hsotg *hsotg)
+{
+ debugfs_remove_recursive(hsotg->debug_root);
+ hsotg->debug_root = NULL;
+}
+EXPORT_SYMBOL_GPL(dwc2_debugfs_exit);