igb: Add Support for new i210/i211 devices.
This patch adds new initialization functions and device support
for i210 and i211 devices.
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 89eb1f8..6409f85 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -458,6 +458,7 @@
#define E1000_ERR_INVALID_ARGUMENT 16
#define E1000_ERR_NO_SPACE 17
#define E1000_ERR_NVM_PBA_SECTION 18
+#define E1000_ERR_INVM_VALUE_NOT_FOUND 19
/* Loop limit on how long we wait for auto-negotiation to complete */
#define COPPER_LINK_UP_LIMIT 10
@@ -595,6 +596,25 @@
#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */
#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */
#define E1000_EECD_SIZE_EX_SHIFT 11
+#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */
+#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done*/
+#define E1000_FLUDONE_ATTEMPTS 20000
+#define E1000_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */
+#define E1000_I210_FIFO_SEL_RX 0x00
+#define E1000_I210_FIFO_SEL_TX_QAV(_i) (0x02 + (_i))
+#define E1000_I210_FIFO_SEL_TX_LEGACY E1000_I210_FIFO_SEL_TX_QAV(0)
+#define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06
+#define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01
+#define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */
+#define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done*/
+#define E1000_FLUDONE_ATTEMPTS 20000
+#define E1000_EERD_EEWR_MAX_COUNT 512 /* buffered EEPROM words rw */
+#define E1000_I210_FIFO_SEL_RX 0x00
+#define E1000_I210_FIFO_SEL_TX_QAV(_i) (0x02 + (_i))
+#define E1000_I210_FIFO_SEL_TX_LEGACY E1000_I210_FIFO_SEL_TX_QAV(0)
+#define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06
+#define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01
+
/* Offset to data in NVM read/write registers */
#define E1000_NVM_RW_REG_DATA 16
@@ -613,6 +633,16 @@
#define NVM_CHECKSUM_REG 0x003F
#define NVM_COMPATIBILITY_REG_3 0x0003
#define NVM_COMPATIBILITY_BIT_MASK 0x8000
+#define NVM_MAC_ADDR 0x0000
+#define NVM_SUB_DEV_ID 0x000B
+#define NVM_SUB_VEN_ID 0x000C
+#define NVM_DEV_ID 0x000D
+#define NVM_VEN_ID 0x000E
+#define NVM_INIT_CTRL_2 0x000F
+#define NVM_INIT_CTRL_4 0x0013
+#define NVM_LED_1_CFG 0x001C
+#define NVM_LED_0_2_CFG 0x001F
+
#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */
#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */
@@ -639,6 +669,7 @@
#define NVM_PBA_OFFSET_0 8
#define NVM_PBA_OFFSET_1 9
+#define NVM_RESERVED_WORD 0xFFFF
#define NVM_PBA_PTR_GUARD 0xFAFA
#define NVM_WORD_SIZE_BASE_SHIFT 6
@@ -696,6 +727,7 @@
#define I82580_I_PHY_ID 0x015403A0
#define I350_I_PHY_ID 0x015403B0
#define M88_VENDOR 0x0141
+#define I210_I_PHY_ID 0x01410C00
/* M88E1000 Specific Registers */
#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
@@ -815,6 +847,7 @@
#define E1000_IPCNFG_EEE_100M_AN 0x00000004 /* EEE Enable 100M AN */
#define E1000_EEER_TX_LPI_EN 0x00010000 /* EEE Tx LPI Enable */
#define E1000_EEER_RX_LPI_EN 0x00020000 /* EEE Rx LPI Enable */
+#define E1000_EEER_FRC_AN 0x10000000 /* Enable EEE in loopback */
#define E1000_EEER_LPI_FC 0x00040000 /* EEE Enable on FC */
/* SerDes Control */