[POWERPC] 4xx: PIKA Warp base platform
Add the base platform support for the PIKA Warp boards.
Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 9ae800d..5e10838 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -480,7 +480,7 @@
config PCI
bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
|| PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \
- || PPC_PS3
+ || PPC_PS3 || 44x
default y if !40x && !CPM2 && !8xx && !PPC_83xx \
&& !PPC_85xx && !PPC_86xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index c3e4e8c..c062c4c 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -54,6 +54,19 @@
help
This option enables support for the AMCC PPC440GRX evaluation board.
+config WARP
+ bool "PIKA Warp"
+ depends on 44x
+ default n
+ select 440EP
+ help
+ This option enables support for the PIKA Warp(tm) Appliance. The Warp
+ is a small computer replacement with up to 9 ports of FXO/FXS plus VOIP
+ stations and trunks.
+
+ See http://www.pikatechnologies.com/ and follow the "PIKA for Computer
+ Telephony Developers" link for more information.
+
#config LUAN
# bool "Luan"
# depends on 44x
@@ -76,6 +89,7 @@
select PPC_FPU
select IBM440EP_ERR42
select IBM_NEW_EMAC_ZMII
+ select USB_ARCH_HAS_OHCI
config 440EPX
bool
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index a2a0dc1..0864d4f 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -5,3 +5,5 @@
obj-$(CONFIG_SEQUOIA) += sequoia.o
obj-$(CONFIG_KATMAI) += katmai.o
obj-$(CONFIG_RAINIER) += rainier.o
+obj-$(CONFIG_WARP) += warp.o
+obj-$(CONFIG_WARP) += warp-nand.o
diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c
new file mode 100644
index 0000000..84ab78f
--- /dev/null
+++ b/arch/powerpc/platforms/44x/warp-nand.c
@@ -0,0 +1,105 @@
+/*
+ * PIKA Warp(tm) NAND flash specific routines
+ *
+ * Copyright (c) 2008 PIKA Technologies
+ * Sean MacLennan <smaclennan@pikatech.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/ndfc.h>
+
+#ifdef CONFIG_MTD_NAND_NDFC
+
+#define CS_NAND_0 1 /* use chip select 1 for NAND device 0 */
+
+#define WARP_NAND_FLASH_REG_ADDR 0xD0000000UL
+#define WARP_NAND_FLASH_REG_SIZE 0x2000
+
+static struct resource warp_ndfc = {
+ .start = WARP_NAND_FLASH_REG_ADDR,
+ .end = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct mtd_partition nand_parts[] = {
+ {
+ .name = "kernel",
+ .offset = 0,
+ .size = 0x0200000
+ },
+ {
+ .name = "root",
+ .offset = 0x0200000,
+ .size = 0x3400000
+ },
+ {
+ .name = "user",
+ .offset = 0x3600000,
+ .size = 0x0A00000
+ },
+};
+
+struct ndfc_controller_settings warp_ndfc_settings = {
+ .ccr_settings = (NDFC_CCR_BS(CS_NAND_0) | NDFC_CCR_ARAC1),
+ .ndfc_erpn = 0,
+};
+
+static struct ndfc_chip_settings warp_chip0_settings = {
+ .bank_settings = 0x80002222,
+};
+
+struct platform_nand_ctrl warp_nand_ctrl = {
+ .priv = &warp_ndfc_settings,
+};
+
+static struct platform_device warp_ndfc_device = {
+ .name = "ndfc-nand",
+ .id = 0,
+ .dev = {
+ .platform_data = &warp_nand_ctrl,
+ },
+ .num_resources = 1,
+ .resource = &warp_ndfc,
+};
+
+static struct nand_ecclayout nand_oob_16 = {
+ .eccbytes = 3,
+ .eccpos = { 0, 1, 2, 3, 6, 7 },
+ .oobfree = { {.offset = 8, .length = 16} }
+};
+
+static struct platform_nand_chip warp_nand_chip0 = {
+ .nr_chips = 1,
+ .chip_offset = CS_NAND_0,
+ .nr_partitions = ARRAY_SIZE(nand_parts),
+ .partitions = nand_parts,
+ .chip_delay = 50,
+ .ecclayout = &nand_oob_16,
+ .priv = &warp_chip0_settings,
+};
+
+static struct platform_device warp_nand_device = {
+ .name = "ndfc-chip",
+ .id = 0,
+ .num_resources = 1,
+ .resource = &warp_ndfc,
+ .dev = {
+ .platform_data = &warp_nand_chip0,
+ .parent = &warp_ndfc_device.dev,
+ }
+};
+
+static int warp_setup_nand_flash(void)
+{
+ platform_device_register(&warp_ndfc_device);
+ platform_device_register(&warp_nand_device);
+
+ return 0;
+}
+device_initcall(warp_setup_nand_flash);
+
+#endif
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
new file mode 100644
index 0000000..8f01563
--- /dev/null
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -0,0 +1,153 @@
+/*
+ * PIKA Warp(tm) board specific routines
+ *
+ * Copyright (c) 2008 PIKA Technologies
+ * Sean MacLennan <smaclennan@pikatech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/kthread.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+
+#include "44x.h"
+
+
+static __initdata struct of_device_id warp_of_bus[] = {
+ { .compatible = "ibm,plb4", },
+ { .compatible = "ibm,opb", },
+ { .compatible = "ibm,ebc", },
+ {},
+};
+
+static int __init warp_device_probe(void)
+{
+ of_platform_bus_probe(NULL, warp_of_bus, NULL);
+ return 0;
+}
+machine_device_initcall(warp, warp_device_probe);
+
+static int __init warp_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "pika,warp");
+}
+
+define_machine(warp) {
+ .name = "Warp",
+ .probe = warp_probe,
+ .progress = udbg_progress,
+ .init_IRQ = uic_init_tree,
+ .get_irq = uic_get_irq,
+ .restart = ppc44x_reset_system,
+ .calibrate_decr = generic_calibrate_decr,
+};
+
+
+#define LED_GREEN (0x80000000 >> 0)
+#define LED_RED (0x80000000 >> 1)
+
+
+/* This is for the power LEDs 1 = on, 0 = off, -1 = leave alone */
+void warp_set_power_leds(int green, int red)
+{
+ static void __iomem *gpio_base = NULL;
+ unsigned leds;
+
+ if (gpio_base == NULL) {
+ struct device_node *np;
+
+ /* Power LEDS are on the second GPIO controller */
+ np = of_find_compatible_node(NULL, NULL, "ibm,gpio-440EP");
+ if (np)
+ np = of_find_compatible_node(np, NULL, "ibm,gpio-440EP");
+ if (np == NULL) {
+ printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
+ return;
+ }
+
+ gpio_base = of_iomap(np, 0);
+ of_node_put(np);
+ if (gpio_base == NULL) {
+ printk(KERN_ERR __FILE__ ": Unable to map gpio");
+ return;
+ }
+ }
+
+ leds = in_be32(gpio_base);
+
+ switch (green) {
+ case 0: leds &= ~LED_GREEN; break;
+ case 1: leds |= LED_GREEN; break;
+ }
+ switch (red) {
+ case 0: leds &= ~LED_RED; break;
+ case 1: leds |= LED_RED; break;
+ }
+
+ out_be32(gpio_base, leds);
+}
+EXPORT_SYMBOL(warp_set_power_leds);
+
+
+#ifdef CONFIG_SENSORS_AD7414
+static int pika_dtm_thread(void __iomem *fpga)
+{
+ extern int ad7414_get_temp(int index);
+
+ while (!kthread_should_stop()) {
+ int temp = ad7414_get_temp(0);
+
+ out_be32(fpga, temp);
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(HZ);
+ }
+
+ return 0;
+}
+
+static int __init pika_dtm_start(void)
+{
+ struct task_struct *dtm_thread;
+ struct device_node *np;
+ struct resource res;
+ void __iomem *fpga;
+
+ np = of_find_compatible_node(NULL, NULL, "pika,fpga");
+ if (np == NULL)
+ return -ENOENT;
+
+ /* We do not call of_iomap here since it would map in the entire
+ * fpga space, which is over 8k.
+ */
+ if (of_address_to_resource(np, 0, &res)) {
+ of_node_put(np);
+ return -ENOENT;
+ }
+ of_node_put(np);
+
+ fpga = ioremap(res.start + 0x20, 4);
+ if (fpga == NULL)
+ return -ENOENT;
+
+ dtm_thread = kthread_run(pika_dtm_thread, fpga + 0x20, "pika-dtm");
+ if (IS_ERR(dtm_thread)) {
+ iounmap(fpga);
+ return PTR_ERR(dtm_thread);
+ }
+
+ return 0;
+}
+device_initcall(pika_dtm_start);
+#endif