[POWERPC] Add arch/powerpc support for the Motorola PrPMC2800
This finally adds the PPC_PRPMC2800 Kconfig option, the board setup
code (the setup and reset functions) and the defconfig, to support the
Motorola PrPMC2800 platform.
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
new file mode 100644
index 0000000..5342095
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
@@ -0,0 +1,171 @@
+/*
+ * Board setup routines for the Motorola PrPMC2800
+ *
+ * Author: Dale Farnsworth <dale@farnsworth.org>
+ *
+ * 2007 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/seq_file.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/kexec.h>
+
+#include <mm/mmu_decl.h>
+
+#include <sysdev/mv64x60.h>
+
+#define MV64x60_MPP_CNTL_0 0x0000
+#define MV64x60_MPP_CNTL_2 0x0008
+
+#define MV64x60_GPP_IO_CNTL 0x0000
+#define MV64x60_GPP_LEVEL_CNTL 0x0010
+#define MV64x60_GPP_VALUE_SET 0x0018
+
+#define PLATFORM_NAME_MAX 32
+
+static char prpmc2800_platform_name[PLATFORM_NAME_MAX];
+
+static void __iomem *mv64x60_mpp_reg_base;
+static void __iomem *mv64x60_gpp_reg_base;
+
+static void __init prpmc2800_setup_arch(void)
+{
+ struct device_node *np;
+ phys_addr_t paddr;
+ const unsigned int *reg;
+ const unsigned int *prop;
+
+ /*
+ * ioremap mpp and gpp registers in case they are later
+ * needed by prpmc2800_reset_board().
+ */
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-mpp");
+ reg = of_get_property(np, "reg", NULL);
+ paddr = of_translate_address(np, reg);
+ of_node_put(np);
+ mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
+
+ np = of_find_compatible_node(NULL, NULL, "marvell,mv64x60-gpp");
+ reg = of_get_property(np, "reg", NULL);
+ paddr = of_translate_address(np, reg);
+ of_node_put(np);
+ mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
+
+ np = of_find_node_by_type(NULL, "cpu");
+ prop = of_get_property(np, "clock-frequency", NULL);
+ if (prop)
+ loops_per_jiffy = *prop / HZ;
+ of_node_put(np);
+
+#ifdef CONFIG_PCI
+ mv64x60_pci_init();
+#endif
+
+ printk("Motorola %s\n", prpmc2800_platform_name);
+}
+
+static void prpmc2800_reset_board(void)
+{
+ u32 temp;
+
+ local_irq_disable();
+
+ temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0);
+ temp &= 0xFFFF0FFF;
+ out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp);
+
+ temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
+ temp |= 0x00000004;
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
+
+ temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
+ temp |= 0x00000004;
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
+
+ temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2);
+ temp &= 0xFFFF0FFF;
+ out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp);
+
+ temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
+ temp |= 0x00080000;
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
+
+ temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
+ temp |= 0x00080000;
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
+
+ out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004);
+}
+
+static void prpmc2800_restart(char *cmd)
+{
+ volatile ulong i = 10000000;
+
+ prpmc2800_reset_board();
+
+ while (i-- > 0);
+ panic("restart failed\n");
+}
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define PPRPM2800_COHERENCY_SETTING "off"
+#else
+#define PPRPM2800_COHERENCY_SETTING "on"
+#endif
+
+void prpmc2800_show_cpuinfo(struct seq_file *m)
+{
+ uint memsize = total_memory;
+
+ seq_printf(m, "Vendor\t\t: Motorola\n");
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+ seq_printf(m, "coherency\t: %s\n", PPRPM2800_COHERENCY_SETTING);
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init prpmc2800_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+ unsigned long len = PLATFORM_NAME_MAX;
+ void *m;
+
+ if (!of_flat_dt_is_compatible(root, "motorola,PrPMC2800"))
+ return 0;
+
+ /* Update ppc_md.name with name from dt */
+ m = of_get_flat_dt_prop(root, "model", &len);
+ if (m)
+ strncpy(prpmc2800_platform_name, m,
+ min((int)len, PLATFORM_NAME_MAX - 1));
+
+ return 1;
+}
+
+define_machine(prpmc2800){
+ .name = prpmc2800_platform_name,
+ .probe = prpmc2800_probe,
+ .setup_arch = prpmc2800_setup_arch,
+ .show_cpuinfo = prpmc2800_show_cpuinfo,
+ .init_IRQ = mv64x60_init_irq,
+ .get_irq = mv64x60_get_irq,
+ .restart = prpmc2800_restart,
+ .calibrate_decr = generic_calibrate_decr,
+#ifdef CONFIG_KEXEC
+ .machine_kexec = default_machine_kexec,
+ .machine_kexec_prepare = default_machine_kexec_prepare,
+ .machine_crash_shutdown = default_machine_crash_shutdown,
+#endif
+};