[ARM] 2883/1: PXA Sharpsl: Add detection of new PXA based Zaurii machine types
Patch from Richard Purdie
Add machine detection routines for several new models of PXA based Zaurii
(SL-C3000 - Spitz, SL-C1000 - Akita, SL-C3100 - Borzoi, SL-C6000 - Tosa).
Sharp continue to use broken bootloaders in ROM.
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/boot/compressed/head-sharpsl.S b/arch/arm/boot/compressed/head-sharpsl.S
index d6bf8a2..59ad696 100644
--- a/arch/arm/boot/compressed/head-sharpsl.S
+++ b/arch/arm/boot/compressed/head-sharpsl.S
@@ -7,7 +7,8 @@
* so we have to figure out the machine for ourselves...
*
* Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750)
- * and Husky (SL-C760).
+ * Husky (SL-C760), Tosa (SL-C6000), Spitz (SL-C3000),
+ * Akita (SL-C1000) and Borzoi (SL-C3100).
*
*/
@@ -23,6 +24,22 @@
__SharpSL_start:
+/* Check for TC6393 - if found we have a Tosa */
+ ldr r7, .TOSAID
+ mov r1, #0x10000000 @ Base address of TC6393 chip
+ mov r6, #0x03
+ ldrh r3, [r1, #8] @ Load TC6393XB Revison: This is 0x0003
+ cmp r6, r3
+ beq .SHARPEND @ Success -> tosa
+
+/* Check for pxa270 - if found, branch */
+ mrc p15, 0, r4, c0, c0 @ Get Processor ID
+ and r4, r4, #0xffffff00
+ ldr r3, .PXA270ID
+ cmp r4, r3
+ beq .PXA270
+
+/* Check for w100 - if not found we have a Poodle */
ldr r1, .W100ADDR @ Base address of w100 chip + regs offset
mov r6, #0x31 @ Load Magic Init value
@@ -30,7 +47,7 @@
mov r5, #0x3000
.W100LOOP:
subs r5, r5, #1
- bne .W100LOOP
+ bne .W100LOOP
mov r6, #0x30 @ Load 2nd Magic Init value
str r6, [r1, #0x280] @ to SCRATCH_UMSK
@@ -40,45 +57,52 @@
cmp r6, r3
bne .SHARPEND @ We have no w100 - Poodle
- mrc p15, 0, r6, c0, c0 @ Get Processor ID
- and r6, r6, #0xffffff00
+/* Check for pxa250 - if found we have a Corgi */
ldr r7, .CORGIID
ldr r3, .PXA255ID
- cmp r6, r3
+ cmp r4, r3
blo .SHARPEND @ We have a PXA250 - Corgi
- mov r1, #0x0c000000 @ Base address of NAND chip
- ldrb r3, [r1, #24] @ Load FLASHCTL
- bic r3, r3, #0x11 @ SET NCE
- orr r3, r3, #0x0a @ SET CLR + FLWP
- strb r3, [r1, #24] @ Save to FLASHCTL
- mov r2, #0x90 @ Command "readid"
- strb r2, [r1, #20] @ Save to FLASHIO
- bic r3, r3, #2 @ CLR CLE
- orr r3, r3, #4 @ SET ALE
- strb r3, [r1, #24] @ Save to FLASHCTL
- mov r2, #0 @ Address 0x00
- strb r2, [r1, #20] @ Save to FLASHIO
- bic r3, r3, #4 @ CLR ALE
- strb r3, [r1, #24] @ Save to FLASHCTL
-.SHARP1:
- ldrb r3, [r1, #24] @ Load FLASHCTL
- tst r3, #32 @ Is chip ready?
- beq .SHARP1
- ldrb r2, [r1, #20] @ NAND Manufacturer ID
- ldrb r3, [r1, #20] @ NAND Chip ID
+/* Check for 64MiB flash - if found we have a Shepherd */
+ bl get_flash_ids
ldr r7, .SHEPHERDID
cmp r3, #0x76 @ 64MiB flash
beq .SHARPEND @ We have Shepherd
+
+/* Must be a Husky */
ldr r7, .HUSKYID @ Must be Husky
b .SHARPEND
+.PXA270:
+/* Check for 16MiB flash - if found we have Spitz */
+ bl get_flash_ids
+ ldr r7, .SPITZID
+ cmp r3, #0x73 @ 16MiB flash
+ beq .SHARPEND @ We have Spitz
+
+/* Check for a second SCOOP chip - if found we have Borzoi */
+ ldr r1, .SCOOP2ADDR
+ ldr r7, .BORZOIID
+ mov r6, #0x0140
+ strh r6, [r1]
+ ldrh r6, [r1]
+ cmp r6, #0x0140
+ beq .SHARPEND @ We have Borzoi
+
+/* Must be Akita */
+ ldr r7, .AKITAID
+ b .SHARPEND @ We have Borzoi
+
.PXA255ID:
.word 0x69052d00 @ PXA255 Processor ID
+.PXA270ID:
+ .word 0x69054100 @ PXA270 Processor ID
.W100ID:
.word 0x57411002 @ w100 Chip ID
.W100ADDR:
.word 0x08010000 @ w100 Chip ID Reg Address
+.SCOOP2ADDR:
+ .word 0x08800040
.POODLEID:
.word MACH_TYPE_POODLE
.CORGIID:
@@ -87,6 +111,41 @@
.word MACH_TYPE_SHEPHERD
.HUSKYID:
.word MACH_TYPE_HUSKY
+.TOSAID:
+ .word MACH_TYPE_TOSA
+.SPITZID:
+ .word MACH_TYPE_SPITZ
+.AKITAID:
+ .word MACH_TYPE_AKITA
+.BORZOIID:
+ .word MACH_TYPE_BORZOI
+
+/*
+ * Return: r2 - NAND Manufacturer ID
+ * r3 - NAND Chip ID
+ * Corrupts: r1
+ */
+get_flash_ids:
+ mov r1, #0x0c000000 @ Base address of NAND chip
+ ldrb r3, [r1, #24] @ Load FLASHCTL
+ bic r3, r3, #0x11 @ SET NCE
+ orr r3, r3, #0x0a @ SET CLR + FLWP
+ strb r3, [r1, #24] @ Save to FLASHCTL
+ mov r2, #0x90 @ Command "readid"
+ strb r2, [r1, #20] @ Save to FLASHIO
+ bic r3, r3, #2 @ CLR CLE
+ orr r3, r3, #4 @ SET ALE
+ strb r3, [r1, #24] @ Save to FLASHCTL
+ mov r2, #0 @ Address 0x00
+ strb r2, [r1, #20] @ Save to FLASHIO
+ bic r3, r3, #4 @ CLR ALE
+ strb r3, [r1, #24] @ Save to FLASHCTL
+.fids1:
+ ldrb r3, [r1, #24] @ Load FLASHCTL
+ tst r3, #32 @ Is chip ready?
+ beq .fids1
+ ldrb r2, [r1, #20] @ NAND Manufacturer ID
+ ldrb r3, [r1, #20] @ NAND Chip ID
+ mov pc, lr
+
.SHARPEND:
-
-