| /* |
| * Driver for Regulator part of Palmas PMIC Chips |
| * |
| * Copyright 2011-2012 Texas Instruments Inc. |
| * |
| * Author: Graeme Gregory <gg@slimlogic.co.uk> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/slab.h> |
| #include <linux/regmap.h> |
| #include <linux/mfd/palmas.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/regulator/of_regulator.h> |
| |
| struct regs_info { |
| char *name; |
| u8 vsel_addr; |
| u8 ctrl_addr; |
| u8 tstep_addr; |
| }; |
| |
| static const struct regs_info palmas_regs_info[] = { |
| { |
| .name = "SMPS12", |
| .vsel_addr = PALMAS_SMPS12_VOLTAGE, |
| .ctrl_addr = PALMAS_SMPS12_CTRL, |
| .tstep_addr = PALMAS_SMPS12_TSTEP, |
| }, |
| { |
| .name = "SMPS123", |
| .vsel_addr = PALMAS_SMPS12_VOLTAGE, |
| .ctrl_addr = PALMAS_SMPS12_CTRL, |
| .tstep_addr = PALMAS_SMPS12_TSTEP, |
| }, |
| { |
| .name = "SMPS3", |
| .vsel_addr = PALMAS_SMPS3_VOLTAGE, |
| .ctrl_addr = PALMAS_SMPS3_CTRL, |
| }, |
| { |
| .name = "SMPS45", |
| .vsel_addr = PALMAS_SMPS45_VOLTAGE, |
| .ctrl_addr = PALMAS_SMPS45_CTRL, |
| .tstep_addr = PALMAS_SMPS45_TSTEP, |
| }, |
| { |
| .name = "SMPS457", |
| .vsel_addr = PALMAS_SMPS45_VOLTAGE, |
| .ctrl_addr = PALMAS_SMPS45_CTRL, |
| .tstep_addr = PALMAS_SMPS45_TSTEP, |
| }, |
| { |
| .name = "SMPS6", |
| .vsel_addr = PALMAS_SMPS6_VOLTAGE, |
| .ctrl_addr = PALMAS_SMPS6_CTRL, |
| .tstep_addr = PALMAS_SMPS6_TSTEP, |
| }, |
| { |
| .name = "SMPS7", |
| .vsel_addr = PALMAS_SMPS7_VOLTAGE, |
| .ctrl_addr = PALMAS_SMPS7_CTRL, |
| }, |
| { |
| .name = "SMPS8", |
| .vsel_addr = PALMAS_SMPS8_VOLTAGE, |
| .ctrl_addr = PALMAS_SMPS8_CTRL, |
| .tstep_addr = PALMAS_SMPS8_TSTEP, |
| }, |
| { |
| .name = "SMPS9", |
| .vsel_addr = PALMAS_SMPS9_VOLTAGE, |
| .ctrl_addr = PALMAS_SMPS9_CTRL, |
| }, |
| { |
| .name = "SMPS10", |
| }, |
| { |
| .name = "LDO1", |
| .vsel_addr = PALMAS_LDO1_VOLTAGE, |
| .ctrl_addr = PALMAS_LDO1_CTRL, |
| }, |
| { |
| .name = "LDO2", |
| .vsel_addr = PALMAS_LDO2_VOLTAGE, |
| .ctrl_addr = PALMAS_LDO2_CTRL, |
| }, |
| { |
| .name = "LDO3", |
| .vsel_addr = PALMAS_LDO3_VOLTAGE, |
| .ctrl_addr = PALMAS_LDO3_CTRL, |
| }, |
| { |
| .name = "LDO4", |
| .vsel_addr = PALMAS_LDO4_VOLTAGE, |
| .ctrl_addr = PALMAS_LDO4_CTRL, |
| }, |
| { |
| .name = "LDO5", |
| .vsel_addr = PALMAS_LDO5_VOLTAGE, |
| .ctrl_addr = PALMAS_LDO5_CTRL, |
| }, |
| { |
| .name = "LDO6", |
| .vsel_addr = PALMAS_LDO6_VOLTAGE, |
| .ctrl_addr = PALMAS_LDO6_CTRL, |
| }, |
| { |
| .name = "LDO7", |
| .vsel_addr = PALMAS_LDO7_VOLTAGE, |
| .ctrl_addr = PALMAS_LDO7_CTRL, |
| }, |
| { |
| .name = "LDO8", |
| .vsel_addr = PALMAS_LDO8_VOLTAGE, |
| .ctrl_addr = PALMAS_LDO8_CTRL, |
| }, |
| { |
| .name = "LDO9", |
| .vsel_addr = PALMAS_LDO9_VOLTAGE, |
| .ctrl_addr = PALMAS_LDO9_CTRL, |
| }, |
| { |
| .name = "LDOLN", |
| .vsel_addr = PALMAS_LDOLN_VOLTAGE, |
| .ctrl_addr = PALMAS_LDOLN_CTRL, |
| }, |
| { |
| .name = "LDOUSB", |
| .vsel_addr = PALMAS_LDOUSB_VOLTAGE, |
| .ctrl_addr = PALMAS_LDOUSB_CTRL, |
| }, |
| }; |
| |
| #define SMPS_CTRL_MODE_OFF 0x00 |
| #define SMPS_CTRL_MODE_ON 0x01 |
| #define SMPS_CTRL_MODE_ECO 0x02 |
| #define SMPS_CTRL_MODE_PWM 0x03 |
| |
| /* These values are derived from the data sheet. And are the number of steps |
| * where there is a voltage change, the ranges at beginning and end of register |
| * max/min values where there are no change are ommitted. |
| * |
| * So they are basically (maxV-minV)/stepV |
| */ |
| #define PALMAS_SMPS_NUM_VOLTAGES 116 |
| #define PALMAS_SMPS10_NUM_VOLTAGES 2 |
| #define PALMAS_LDO_NUM_VOLTAGES 50 |
| |
| #define SMPS10_VSEL (1<<3) |
| #define SMPS10_BOOST_EN (1<<2) |
| #define SMPS10_BYPASS_EN (1<<1) |
| #define SMPS10_SWITCH_EN (1<<0) |
| |
| #define REGULATOR_SLAVE 0 |
| |
| static int palmas_smps_read(struct palmas *palmas, unsigned int reg, |
| unsigned int *dest) |
| { |
| unsigned int addr; |
| |
| addr = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, reg); |
| |
| return regmap_read(palmas->regmap[REGULATOR_SLAVE], addr, dest); |
| } |
| |
| static int palmas_smps_write(struct palmas *palmas, unsigned int reg, |
| unsigned int value) |
| { |
| unsigned int addr; |
| |
| addr = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, reg); |
| |
| return regmap_write(palmas->regmap[REGULATOR_SLAVE], addr, value); |
| } |
| |
| static int palmas_ldo_read(struct palmas *palmas, unsigned int reg, |
| unsigned int *dest) |
| { |
| unsigned int addr; |
| |
| addr = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, reg); |
| |
| return regmap_read(palmas->regmap[REGULATOR_SLAVE], addr, dest); |
| } |
| |
| static int palmas_ldo_write(struct palmas *palmas, unsigned int reg, |
| unsigned int value) |
| { |
| unsigned int addr; |
| |
| addr = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, reg); |
| |
| return regmap_write(palmas->regmap[REGULATOR_SLAVE], addr, value); |
| } |
| |
| static int palmas_is_enabled_smps(struct regulator_dev *dev) |
| { |
| struct palmas_pmic *pmic = rdev_get_drvdata(dev); |
| int id = rdev_get_id(dev); |
| unsigned int reg; |
| |
| palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®); |
| |
| reg &= PALMAS_SMPS12_CTRL_STATUS_MASK; |
| reg >>= PALMAS_SMPS12_CTRL_STATUS_SHIFT; |
| |
| return !!(reg); |
| } |
| |
| static int palmas_enable_smps(struct regulator_dev *dev) |
| { |
| struct palmas_pmic *pmic = rdev_get_drvdata(dev); |
| int id = rdev_get_id(dev); |
| unsigned int reg; |
| |
| palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®); |
| |
| reg &= ~PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK; |
| reg |= SMPS_CTRL_MODE_ON; |
| |
| palmas_smps_write(pmic->palmas, palmas_regs_info[id].ctrl_addr, reg); |
| |
| return 0; |
| } |
| |
| static int palmas_disable_smps(struct regulator_dev *dev) |
| { |
| struct palmas_pmic *pmic = rdev_get_drvdata(dev); |
| int id = rdev_get_id(dev); |
| unsigned int reg; |
| |
| palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®); |
| |
| reg &= ~PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK; |
| |
| palmas_smps_write(pmic->palmas, palmas_regs_info[id].ctrl_addr, reg); |
| |
| return 0; |
| } |
| |
| |
| static int palmas_set_mode_smps(struct regulator_dev *dev, unsigned int mode) |
| { |
| struct palmas_pmic *pmic = rdev_get_drvdata(dev); |
| int id = rdev_get_id(dev); |
| unsigned int reg; |
| |
| palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®); |
| reg &= ~PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK; |
| |
| switch (mode) { |
| case REGULATOR_MODE_NORMAL: |
| reg |= SMPS_CTRL_MODE_ON; |
| break; |
| case REGULATOR_MODE_IDLE: |
| reg |= SMPS_CTRL_MODE_ECO; |
| break; |
| case REGULATOR_MODE_FAST: |
| reg |= SMPS_CTRL_MODE_PWM; |
| break; |
| default: |
| return -EINVAL; |
| } |
| palmas_smps_write(pmic->palmas, palmas_regs_info[id].ctrl_addr, reg); |
| |
| return 0; |
| } |
| |
| static unsigned int palmas_get_mode_smps(struct regulator_dev *dev) |
| { |
| struct palmas_pmic *pmic = rdev_get_drvdata(dev); |
| int id = rdev_get_id(dev); |
| unsigned int reg; |
| |
| palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®); |
| reg &= PALMAS_SMPS12_CTRL_STATUS_MASK; |
| reg >>= PALMAS_SMPS12_CTRL_STATUS_SHIFT; |
| |
| switch (reg) { |
| case SMPS_CTRL_MODE_ON: |
| return REGULATOR_MODE_NORMAL; |
| case SMPS_CTRL_MODE_ECO: |
| return REGULATOR_MODE_IDLE; |
| case SMPS_CTRL_MODE_PWM: |
| return REGULATOR_MODE_FAST; |
| } |
| |
| return 0; |
| } |
| |
| static int palmas_list_voltage_smps(struct regulator_dev *dev, |
| unsigned selector) |
| { |
| struct palmas_pmic *pmic = rdev_get_drvdata(dev); |
| int id = rdev_get_id(dev); |
| int mult = 1; |
| |
| if (!selector) |
| return 0; |
| |
| /* Read the multiplier set in VSEL register to return |
| * the correct voltage. |
| */ |
| if (pmic->range[id]) |
| mult = 2; |
| |
| /* Voltage is (0.49V + (selector * 0.01V)) * RANGE |
| * as defined in data sheet. RANGE is either x1 or x2 |
| */ |
| return (490000 + (selector * 10000)) * mult; |
| } |
| |
| static int palmas_get_voltage_smps_sel(struct regulator_dev *dev) |
| { |
| struct palmas_pmic *pmic = rdev_get_drvdata(dev); |
| int id = rdev_get_id(dev); |
| int selector; |
| unsigned int reg; |
| unsigned int addr; |
| |
| addr = palmas_regs_info[id].vsel_addr; |
| |
| palmas_smps_read(pmic->palmas, addr, ®); |
| |
| selector = reg & PALMAS_SMPS12_VOLTAGE_VSEL_MASK; |
| |
| /* Adjust selector to match list_voltage ranges */ |
| if ((selector > 0) && (selector < 6)) |
| selector = 6; |
| if (!selector) |
| selector = 5; |
| if (selector > 121) |
| selector = 121; |
| selector -= 5; |
| |
| return selector; |
| } |
| |
| static int palmas_set_voltage_smps_sel(struct regulator_dev *dev, |
| unsigned selector) |
| { |
| struct palmas_pmic *pmic = rdev_get_drvdata(dev); |
| int id = rdev_get_id(dev); |
| unsigned int reg = 0; |
| unsigned int addr; |
| |
| addr = palmas_regs_info[id].vsel_addr; |
| |
| /* Make sure we don't change the value of RANGE */ |
| if (pmic->range[id]) |
| reg |= PALMAS_SMPS12_VOLTAGE_RANGE; |
| |
| /* Adjust the linux selector into range used in VSEL register */ |
| if (selector) |
| reg |= selector + 5; |
| |
| palmas_smps_write(pmic->palmas, addr, reg); |
| |
| return 0; |
| } |
| |
| static int palmas_map_voltage_smps(struct regulator_dev *rdev, |
| int min_uV, int max_uV) |
| { |
| struct palmas_pmic *pmic = rdev_get_drvdata(rdev); |
| int id = rdev_get_id(rdev); |
| int ret, voltage; |
| |
| if (min_uV == 0) |
| return 0; |
| |
| if (pmic->range[id]) { /* RANGE is x2 */ |
| if (min_uV < 1000000) |
| min_uV = 1000000; |
| ret = DIV_ROUND_UP(min_uV - 1000000, 20000) + 1; |
| } else { /* RANGE is x1 */ |
| if (min_uV < 500000) |
| min_uV = 500000; |
| ret = DIV_ROUND_UP(min_uV - 500000, 10000) + 1; |
| } |
| |
| /* Map back into a voltage to verify we're still in bounds */ |
| voltage = palmas_list_voltage_smps(rdev, ret); |
| if (voltage < min_uV || voltage > max_uV) |
| return -EINVAL; |
| |
| return ret; |
| } |
| |
| static struct regulator_ops palmas_ops_smps = { |
| .is_enabled = palmas_is_enabled_smps, |
| .enable = palmas_enable_smps, |
| .disable = palmas_disable_smps, |
| .set_mode = palmas_set_mode_smps, |
| .get_mode = palmas_get_mode_smps, |
| .get_voltage_sel = palmas_get_voltage_smps_sel, |
| .set_voltage_sel = palmas_set_voltage_smps_sel, |
| .list_voltage = palmas_list_voltage_smps, |
| .map_voltage = palmas_map_voltage_smps, |
| }; |
| |
| static struct regulator_ops palmas_ops_smps10 = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| .map_voltage = regulator_map_voltage_linear, |
| }; |
| |
| static int palmas_is_enabled_ldo(struct regulator_dev *dev) |
| { |
| struct palmas_pmic *pmic = rdev_get_drvdata(dev); |
| int id = rdev_get_id(dev); |
| unsigned int reg; |
| |
| palmas_ldo_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, ®); |
| |
| reg &= PALMAS_LDO1_CTRL_STATUS; |
| |
| return !!(reg); |
| } |
| |
| static int palmas_list_voltage_ldo(struct regulator_dev *dev, |
| unsigned selector) |
| { |
| if (!selector) |
| return 0; |
| |
| /* voltage is 0.85V + (selector * 0.05v) */ |
| return 850000 + (selector * 50000); |
| } |
| |
| static int palmas_map_voltage_ldo(struct regulator_dev *rdev, |
| int min_uV, int max_uV) |
| { |
| int ret, voltage; |
| |
| if (min_uV == 0) |
| return 0; |
| |
| if (min_uV < 900000) |
| min_uV = 900000; |
| ret = DIV_ROUND_UP(min_uV - 900000, 50000) + 1; |
| |
| /* Map back into a voltage to verify we're still in bounds */ |
| voltage = palmas_list_voltage_ldo(rdev, ret); |
| if (voltage < min_uV || voltage > max_uV) |
| return -EINVAL; |
| |
| return ret; |
| } |
| |
| static struct regulator_ops palmas_ops_ldo = { |
| .is_enabled = palmas_is_enabled_ldo, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = palmas_list_voltage_ldo, |
| .map_voltage = palmas_map_voltage_ldo, |
| }; |
| |
| /* |
| * setup the hardware based sleep configuration of the SMPS/LDO regulators |
| * from the platform data. This is different to the software based control |
| * supported by the regulator framework as it is controlled by toggling |
| * pins on the PMIC such as PREQ, SYSEN, ... |
| */ |
| static int palmas_smps_init(struct palmas *palmas, int id, |
| struct palmas_reg_init *reg_init) |
| { |
| unsigned int reg; |
| unsigned int addr; |
| int ret; |
| |
| addr = palmas_regs_info[id].ctrl_addr; |
| |
| ret = palmas_smps_read(palmas, addr, ®); |
| if (ret) |
| return ret; |
| |
| switch (id) { |
| case PALMAS_REG_SMPS10: |
| if (reg_init->mode_sleep) { |
| reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK; |
| reg |= reg_init->mode_sleep << |
| PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT; |
| } |
| break; |
| default: |
| if (reg_init->warm_reset) |
| reg |= PALMAS_SMPS12_CTRL_WR_S; |
| |
| if (reg_init->roof_floor) |
| reg |= PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN; |
| |
| if (reg_init->mode_sleep) { |
| reg &= ~PALMAS_SMPS12_CTRL_MODE_SLEEP_MASK; |
| reg |= reg_init->mode_sleep << |
| PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT; |
| } |
| } |
| |
| ret = palmas_smps_write(palmas, addr, reg); |
| if (ret) |
| return ret; |
| |
| if (palmas_regs_info[id].tstep_addr && reg_init->tstep) { |
| addr = palmas_regs_info[id].tstep_addr; |
| |
| reg = reg_init->tstep & PALMAS_SMPS12_TSTEP_TSTEP_MASK; |
| |
| ret = palmas_smps_write(palmas, addr, reg); |
| if (ret) |
| return ret; |
| } |
| |
| if (palmas_regs_info[id].vsel_addr && reg_init->vsel) { |
| addr = palmas_regs_info[id].vsel_addr; |
| |
| reg = reg_init->vsel; |
| |
| ret = palmas_smps_write(palmas, addr, reg); |
| if (ret) |
| return ret; |
| } |
| |
| |
| return 0; |
| } |
| |
| static int palmas_ldo_init(struct palmas *palmas, int id, |
| struct palmas_reg_init *reg_init) |
| { |
| unsigned int reg; |
| unsigned int addr; |
| int ret; |
| |
| addr = palmas_regs_info[id].ctrl_addr; |
| |
| ret = palmas_ldo_read(palmas, addr, ®); |
| if (ret) |
| return ret; |
| |
| if (reg_init->warm_reset) |
| reg |= PALMAS_LDO1_CTRL_WR_S; |
| |
| if (reg_init->mode_sleep) |
| reg |= PALMAS_LDO1_CTRL_MODE_SLEEP; |
| |
| ret = palmas_ldo_write(palmas, addr, reg); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static struct of_regulator_match palmas_matches[] = { |
| { .name = "smps12", }, |
| { .name = "smps123", }, |
| { .name = "smps3", }, |
| { .name = "smps45", }, |
| { .name = "smps457", }, |
| { .name = "smps6", }, |
| { .name = "smps7", }, |
| { .name = "smps8", }, |
| { .name = "smps9", }, |
| { .name = "smps10", }, |
| { .name = "ldo1", }, |
| { .name = "ldo2", }, |
| { .name = "ldo3", }, |
| { .name = "ldo4", }, |
| { .name = "ldo5", }, |
| { .name = "ldo6", }, |
| { .name = "ldo7", }, |
| { .name = "ldo8", }, |
| { .name = "ldo9", }, |
| { .name = "ldoln", }, |
| { .name = "ldousb", }, |
| }; |
| |
| static void __devinit palmas_dt_to_pdata(struct device *dev, |
| struct device_node *node, |
| struct palmas_pmic_platform_data *pdata) |
| { |
| struct device_node *regulators; |
| u32 prop; |
| int idx, ret; |
| |
| regulators = of_find_node_by_name(node, "regulators"); |
| if (!regulators) { |
| dev_info(dev, "regulator node not found\n"); |
| return; |
| } |
| |
| ret = of_regulator_match(dev, regulators, palmas_matches, |
| PALMAS_NUM_REGS); |
| if (ret < 0) { |
| dev_err(dev, "Error parsing regulator init data: %d\n", ret); |
| return; |
| } |
| |
| for (idx = 0; idx < PALMAS_NUM_REGS; idx++) { |
| if (!palmas_matches[idx].init_data || |
| !palmas_matches[idx].of_node) |
| continue; |
| |
| pdata->reg_data[idx] = palmas_matches[idx].init_data; |
| |
| pdata->reg_init[idx] = devm_kzalloc(dev, |
| sizeof(struct palmas_reg_init), GFP_KERNEL); |
| |
| ret = of_property_read_u32(palmas_matches[idx].of_node, |
| "ti,warm_reset", &prop); |
| if (!ret) |
| pdata->reg_init[idx]->warm_reset = prop; |
| |
| ret = of_property_read_u32(palmas_matches[idx].of_node, |
| "ti,roof_floor", &prop); |
| if (!ret) |
| pdata->reg_init[idx]->roof_floor = prop; |
| |
| ret = of_property_read_u32(palmas_matches[idx].of_node, |
| "ti,mode_sleep", &prop); |
| if (!ret) |
| pdata->reg_init[idx]->mode_sleep = prop; |
| |
| ret = of_property_read_u32(palmas_matches[idx].of_node, |
| "ti,warm_reset", &prop); |
| if (!ret) |
| pdata->reg_init[idx]->warm_reset = prop; |
| |
| ret = of_property_read_u32(palmas_matches[idx].of_node, |
| "ti,tstep", &prop); |
| if (!ret) |
| pdata->reg_init[idx]->tstep = prop; |
| |
| ret = of_property_read_u32(palmas_matches[idx].of_node, |
| "ti,vsel", &prop); |
| if (!ret) |
| pdata->reg_init[idx]->vsel = prop; |
| } |
| |
| ret = of_property_read_u32(node, "ti,ldo6_vibrator", &prop); |
| if (!ret) |
| pdata->ldo6_vibrator = prop; |
| } |
| |
| |
| static __devinit int palmas_probe(struct platform_device *pdev) |
| { |
| struct palmas *palmas = dev_get_drvdata(pdev->dev.parent); |
| struct palmas_pmic_platform_data *pdata = pdev->dev.platform_data; |
| struct device_node *node = pdev->dev.of_node; |
| struct regulator_dev *rdev; |
| struct regulator_config config = { }; |
| struct palmas_pmic *pmic; |
| struct palmas_reg_init *reg_init; |
| int id = 0, ret; |
| unsigned int addr, reg; |
| |
| if (node && !pdata) { |
| pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); |
| |
| if (!pdata) |
| return -ENOMEM; |
| |
| palmas_dt_to_pdata(&pdev->dev, node, pdata); |
| } |
| |
| pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL); |
| if (!pmic) |
| return -ENOMEM; |
| |
| pmic->dev = &pdev->dev; |
| pmic->palmas = palmas; |
| palmas->pmic = pmic; |
| platform_set_drvdata(pdev, pmic); |
| |
| ret = palmas_smps_read(palmas, PALMAS_SMPS_CTRL, ®); |
| if (ret) |
| return ret; |
| |
| if (reg & PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN) |
| pmic->smps123 = 1; |
| |
| if (reg & PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN) |
| pmic->smps457 = 1; |
| |
| config.regmap = palmas->regmap[REGULATOR_SLAVE]; |
| config.dev = &pdev->dev; |
| config.driver_data = pmic; |
| |
| for (id = 0; id < PALMAS_REG_LDO1; id++) { |
| |
| /* |
| * Miss out regulators which are not available due |
| * to slaving configurations. |
| */ |
| switch (id) { |
| case PALMAS_REG_SMPS12: |
| case PALMAS_REG_SMPS3: |
| if (pmic->smps123) |
| continue; |
| break; |
| case PALMAS_REG_SMPS123: |
| if (!pmic->smps123) |
| continue; |
| break; |
| case PALMAS_REG_SMPS45: |
| case PALMAS_REG_SMPS7: |
| if (pmic->smps457) |
| continue; |
| break; |
| case PALMAS_REG_SMPS457: |
| if (!pmic->smps457) |
| continue; |
| } |
| |
| /* Register the regulators */ |
| pmic->desc[id].name = palmas_regs_info[id].name; |
| pmic->desc[id].id = id; |
| |
| switch (id) { |
| case PALMAS_REG_SMPS10: |
| pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES; |
| pmic->desc[id].ops = &palmas_ops_smps10; |
| pmic->desc[id].vsel_reg = |
| PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, |
| PALMAS_SMPS10_CTRL); |
| pmic->desc[id].vsel_mask = SMPS10_VSEL; |
| pmic->desc[id].enable_reg = |
| PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, |
| PALMAS_SMPS10_STATUS); |
| pmic->desc[id].enable_mask = SMPS10_BOOST_EN; |
| pmic->desc[id].min_uV = 3750000; |
| pmic->desc[id].uV_step = 1250000; |
| break; |
| default: |
| pmic->desc[id].ops = &palmas_ops_smps; |
| pmic->desc[id].n_voltages = PALMAS_SMPS_NUM_VOLTAGES; |
| } |
| |
| pmic->desc[id].type = REGULATOR_VOLTAGE; |
| pmic->desc[id].owner = THIS_MODULE; |
| |
| /* Initialise sleep/init values from platform data */ |
| if (pdata) { |
| reg_init = pdata->reg_init[id]; |
| if (reg_init) { |
| ret = palmas_smps_init(palmas, id, reg_init); |
| if (ret) |
| goto err_unregister_regulator; |
| } |
| } |
| |
| /* |
| * read and store the RANGE bit for later use |
| * This must be done before regulator is probed otherwise |
| * we error in probe with unsuportable ranges. |
| */ |
| if (id != PALMAS_REG_SMPS10) { |
| addr = palmas_regs_info[id].vsel_addr; |
| |
| ret = palmas_smps_read(pmic->palmas, addr, ®); |
| if (ret) |
| goto err_unregister_regulator; |
| if (reg & PALMAS_SMPS12_VOLTAGE_RANGE) |
| pmic->range[id] = 1; |
| } |
| |
| if (pdata) |
| config.init_data = pdata->reg_data[id]; |
| else |
| config.init_data = NULL; |
| |
| config.of_node = palmas_matches[id].of_node; |
| |
| rdev = regulator_register(&pmic->desc[id], &config); |
| if (IS_ERR(rdev)) { |
| dev_err(&pdev->dev, |
| "failed to register %s regulator\n", |
| pdev->name); |
| ret = PTR_ERR(rdev); |
| goto err_unregister_regulator; |
| } |
| |
| /* Save regulator for cleanup */ |
| pmic->rdev[id] = rdev; |
| } |
| |
| /* Start this loop from the id left from previous loop */ |
| for (; id < PALMAS_NUM_REGS; id++) { |
| |
| /* Miss out regulators which are not available due |
| * to alternate functions. |
| */ |
| |
| /* Register the regulators */ |
| pmic->desc[id].name = palmas_regs_info[id].name; |
| pmic->desc[id].id = id; |
| pmic->desc[id].n_voltages = PALMAS_LDO_NUM_VOLTAGES; |
| |
| pmic->desc[id].ops = &palmas_ops_ldo; |
| |
| pmic->desc[id].type = REGULATOR_VOLTAGE; |
| pmic->desc[id].owner = THIS_MODULE; |
| pmic->desc[id].vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, |
| palmas_regs_info[id].vsel_addr); |
| pmic->desc[id].vsel_mask = PALMAS_LDO1_VOLTAGE_VSEL_MASK; |
| pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE, |
| palmas_regs_info[id].ctrl_addr); |
| pmic->desc[id].enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE; |
| |
| if (pdata) |
| config.init_data = pdata->reg_data[id]; |
| else |
| config.init_data = NULL; |
| |
| config.of_node = palmas_matches[id].of_node; |
| |
| rdev = regulator_register(&pmic->desc[id], &config); |
| if (IS_ERR(rdev)) { |
| dev_err(&pdev->dev, |
| "failed to register %s regulator\n", |
| pdev->name); |
| ret = PTR_ERR(rdev); |
| goto err_unregister_regulator; |
| } |
| |
| /* Save regulator for cleanup */ |
| pmic->rdev[id] = rdev; |
| |
| /* Initialise sleep/init values from platform data */ |
| if (pdata) { |
| reg_init = pdata->reg_init[id]; |
| if (reg_init) { |
| ret = palmas_ldo_init(palmas, id, reg_init); |
| if (ret) { |
| regulator_unregister(pmic->rdev[id]); |
| goto err_unregister_regulator; |
| } |
| } |
| } |
| } |
| |
| return 0; |
| |
| err_unregister_regulator: |
| while (--id >= 0) |
| regulator_unregister(pmic->rdev[id]); |
| return ret; |
| } |
| |
| static int __devexit palmas_remove(struct platform_device *pdev) |
| { |
| struct palmas_pmic *pmic = platform_get_drvdata(pdev); |
| int id; |
| |
| for (id = 0; id < PALMAS_NUM_REGS; id++) |
| regulator_unregister(pmic->rdev[id]); |
| return 0; |
| } |
| |
| static struct of_device_id __devinitdata of_palmas_match_tbl[] = { |
| { .compatible = "ti,palmas-pmic", }, |
| { /* end */ } |
| }; |
| |
| static struct platform_driver palmas_driver = { |
| .driver = { |
| .name = "palmas-pmic", |
| .of_match_table = of_palmas_match_tbl, |
| .owner = THIS_MODULE, |
| }, |
| .probe = palmas_probe, |
| .remove = __devexit_p(palmas_remove), |
| }; |
| |
| static int __init palmas_init(void) |
| { |
| return platform_driver_register(&palmas_driver); |
| } |
| subsys_initcall(palmas_init); |
| |
| static void __exit palmas_exit(void) |
| { |
| platform_driver_unregister(&palmas_driver); |
| } |
| module_exit(palmas_exit); |
| |
| MODULE_AUTHOR("Graeme Gregory <gg@slimlogic.co.uk>"); |
| MODULE_DESCRIPTION("Palmas voltage regulator driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:palmas-pmic"); |
| MODULE_DEVICE_TABLE(of, of_palmas_match_tbl); |