[SCSI] lpfc 8.3.28: SLI fixes and added SLI4 support
Adapter (SLI) interface fixes:
- Modify WQ handling to use entry_repost (CR 123981)
- Fix for ABTS. Do not free original IOCB whenever ABTS fails. (CR 115829)
- Check board for FCoE before reading FCoE paramaters (CR124731)
- Add support for SLI4 FC Loop mode (CR 124721)
- Add support for resource count changes during fw reset. (CR 125888, 125675)
- Increase CQE count from 256 to 1024. (CR 126149)
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index d247eb0..6096c9a 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -62,7 +62,6 @@
static int lpfc_sli4_queue_verify(struct lpfc_hba *);
static int lpfc_create_bootstrap_mbox(struct lpfc_hba *);
static int lpfc_setup_endian_order(struct lpfc_hba *);
-static int lpfc_sli4_read_config(struct lpfc_hba *);
static void lpfc_destroy_bootstrap_mbox(struct lpfc_hba *);
static void lpfc_free_sgl_list(struct lpfc_hba *);
static int lpfc_init_sgl_list(struct lpfc_hba *);
@@ -2655,6 +2654,32 @@
}
/**
+ * lpfc_scsi_buf_update - Update the scsi_buffers that are already allocated.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine goes through all the scsi buffers in the system and updates the
+ * Physical XRIs assigned to the SCSI buffer because these may change after any
+ * firmware reset
+ *
+ * Return codes
+ * 0 - successful (for now, it always returns 0)
+ **/
+int
+lpfc_scsi_buf_update(struct lpfc_hba *phba)
+{
+ struct lpfc_scsi_buf *sb, *sb_next;
+
+ spin_lock_irq(&phba->hbalock);
+ spin_lock(&phba->scsi_buf_list_lock);
+ list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list)
+ sb->cur_iocbq.sli4_xritag =
+ phba->sli4_hba.xri_ids[sb->cur_iocbq.sli4_lxritag];
+ spin_unlock(&phba->scsi_buf_list_lock);
+ spin_unlock_irq(&phba->hbalock);
+ return 0;
+}
+
+/**
* lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists
* @phba: pointer to lpfc hba data structure.
*
@@ -5021,15 +5046,8 @@
struct lpfc_rpi_hdr *rpi_hdr;
INIT_LIST_HEAD(&phba->sli4_hba.lpfc_rpi_hdr_list);
- /*
- * If the SLI4 port supports extents, posting the rpi header isn't
- * required. Set the expected maximum count and let the actual value
- * get set when extents are fully allocated.
- */
- if (!phba->sli4_hba.rpi_hdrs_in_use) {
- phba->sli4_hba.next_rpi = phba->sli4_hba.max_cfg_param.max_rpi;
+ if (!phba->sli4_hba.rpi_hdrs_in_use)
return rc;
- }
if (phba->sli4_hba.extents_in_use)
return -EIO;
@@ -5923,7 +5941,7 @@
* -ENOMEM - No available memory
* -EIO - The mailbox failed to complete successfully.
**/
-static int
+int
lpfc_sli4_read_config(struct lpfc_hba *phba)
{
LPFC_MBOXQ_t *pmb;
@@ -5955,6 +5973,20 @@
rc = -EIO;
} else {
rd_config = &pmb->u.mqe.un.rd_config;
+ if (bf_get(lpfc_mbx_rd_conf_lnk_ldv, rd_config)) {
+ phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_VAL;
+ phba->sli4_hba.lnk_info.lnk_tp =
+ bf_get(lpfc_mbx_rd_conf_lnk_type, rd_config);
+ phba->sli4_hba.lnk_info.lnk_no =
+ bf_get(lpfc_mbx_rd_conf_lnk_numb, rd_config);
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3081 lnk_type:%d, lnk_numb:%d\n",
+ phba->sli4_hba.lnk_info.lnk_tp,
+ phba->sli4_hba.lnk_info.lnk_no);
+ } else
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "3082 Mailbox (x%x) returned ldv:x0\n",
+ bf_get(lpfc_mqe_command, &pmb->u.mqe));
phba->sli4_hba.extents_in_use =
bf_get(lpfc_mbx_rd_conf_extnts_inuse, rd_config);
phba->sli4_hba.max_cfg_param.max_xri =