blob: a21b0fd21f4ef586223d8033b2bbb1f8b762076a [file] [log] [blame]
Jon Mason088e31482016-08-03 14:39:03 -04001/*
2 * BSD LICENSE
3 *
4 * Copyright(c) 2016 Broadcom. All rights reserved.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
8 * are met:
9 *
10 * * Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * * Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in
14 * the documentation and/or other materials provided with the
15 * distribution.
16 * * Neither the name of Broadcom Corporation nor the names of its
17 * contributors may be used to endorse or promote products derived
18 * from this software without specific prior written permission.
19 *
20 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
21 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
22 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
23 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
24 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
25 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
26 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 */
32
33/dts-v1/;
34
35#include "bcm-nsp.dtsi"
36#include <dt-bindings/gpio/gpio.h>
37
38/ {
39 model = "NorthStar Plus SVK (BCM958522ER)";
40 compatible = "brcm,bcm58522", "brcm,nsp";
41
42 aliases {
43 serial0 = &uart0;
44 };
45
46 chosen {
47 stdout-path = "serial0:115200n8";
48 };
49
50 memory {
51 device_type = "memory";
52 reg = <0x60000000 0x80000000>;
53 };
54
55 gpio-restart {
56 compatible = "gpio-restart";
57 gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
58 priority = <200>;
59 };
60};
61
62/* USB 2/3 support needed to be complete */
63
64&amac0 {
65 status = "okay";
66};
67
68
69&amac1 {
70 status = "okay";
71};
72
73&nand {
74 nandcs@0 {
75 compatible = "brcm,nandcs";
76 reg = <0>;
77 nand-on-flash-bbt;
78
79 #address-cells = <1>;
80 #size-cells = <1>;
81
82 nand-ecc-strength = <24>;
83 nand-ecc-step-size = <1024>;
84
85 brcm,nand-oob-sector-size = <27>;
86
87 partition@0 {
88 label = "nboot";
89 reg = <0x00000000 0x00200000>;
90 read-only;
91 };
92 partition@200000 {
93 label = "nenv";
94 reg = <0x00200000 0x00400000>;
95 };
96 partition@600000 {
97 label = "nsystem";
98 reg = <0x00600000 0x00a00000>;
99 };
100 partition@1000000 {
101 label = "nrootfs";
102 reg = <0x01000000 0x03000000>;
103 };
104 partition@4000000 {
105 label = "ncustfs";
106 reg = <0x04000000 0x3c000000>;
107 };
108 };
109};
110
111&pcie0 {
112 status = "okay";
113};
114
115&pcie1 {
116 status = "okay";
117};
118
119&pinctrl {
120 pinctrl-names = "default";
121 pinctrl-0 = <&nand_sel>;
122 nand_sel: nand_sel {
123 function = "nand";
124 groups = "nand_grp";
125 };
126};
127
128&uart0 {
129 status = "okay";
130};