Phil Blundell | 78a56aa | 2007-01-18 00:44:09 -0500 | [diff] [blame] | 1 | /* |
| 2 | * Driver for keys on GPIO lines capable of generating interrupts. |
| 3 | * |
| 4 | * Copyright 2005 Phil Blundell |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License version 2 as |
| 8 | * published by the Free Software Foundation. |
| 9 | */ |
| 10 | |
| 11 | #include <linux/module.h> |
| 12 | #include <linux/version.h> |
| 13 | |
| 14 | #include <linux/init.h> |
| 15 | #include <linux/fs.h> |
| 16 | #include <linux/interrupt.h> |
| 17 | #include <linux/irq.h> |
| 18 | #include <linux/sched.h> |
| 19 | #include <linux/pm.h> |
| 20 | #include <linux/sysctl.h> |
| 21 | #include <linux/proc_fs.h> |
| 22 | #include <linux/delay.h> |
| 23 | #include <linux/platform_device.h> |
| 24 | #include <linux/input.h> |
| 25 | #include <linux/irq.h> |
| 26 | |
| 27 | #include <asm/arch/pxa-regs.h> |
| 28 | #include <asm/arch/hardware.h> |
| 29 | |
| 30 | #include <asm/hardware/gpio_keys.h> |
| 31 | |
| 32 | static irqreturn_t gpio_keys_isr(int irq, void *dev_id) |
| 33 | { |
| 34 | int i; |
| 35 | struct platform_device *pdev = dev_id; |
| 36 | struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; |
| 37 | struct input_dev *input = platform_get_drvdata(pdev); |
| 38 | |
| 39 | for (i = 0; i < pdata->nbuttons; i++) { |
| 40 | int gpio = pdata->buttons[i].gpio; |
| 41 | if (irq == IRQ_GPIO(gpio)) { |
| 42 | int state = ((GPLR(gpio) & GPIO_bit(gpio)) ? 1 : 0) ^ (pdata->buttons[i].active_low); |
| 43 | |
| 44 | input_report_key(input, pdata->buttons[i].keycode, state); |
| 45 | input_sync(input); |
| 46 | } |
| 47 | } |
| 48 | |
| 49 | return IRQ_HANDLED; |
| 50 | } |
| 51 | |
| 52 | static int __devinit gpio_keys_probe(struct platform_device *pdev) |
| 53 | { |
| 54 | struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; |
| 55 | struct input_dev *input; |
| 56 | int i, error; |
| 57 | |
| 58 | input = input_allocate_device(); |
| 59 | if (!input) |
| 60 | return -ENOMEM; |
| 61 | |
| 62 | platform_set_drvdata(pdev, input); |
| 63 | |
| 64 | input->evbit[0] = BIT(EV_KEY); |
| 65 | |
| 66 | input->name = pdev->name; |
| 67 | input->phys = "gpio-keys/input0"; |
| 68 | input->cdev.dev = &pdev->dev; |
| 69 | input->private = pdata; |
| 70 | |
| 71 | input->id.bustype = BUS_HOST; |
| 72 | input->id.vendor = 0x0001; |
| 73 | input->id.product = 0x0001; |
| 74 | input->id.version = 0x0100; |
| 75 | |
| 76 | for (i = 0; i < pdata->nbuttons; i++) { |
| 77 | int code = pdata->buttons[i].keycode; |
| 78 | int irq = IRQ_GPIO(pdata->buttons[i].gpio); |
| 79 | |
| 80 | set_irq_type(irq, IRQ_TYPE_EDGE_BOTH); |
Thomas Gleixner | 2db6346 | 2007-02-14 00:33:20 -0800 | [diff] [blame] | 81 | error = request_irq(irq, gpio_keys_isr, IRQF_SAMPLE_RANDOM, |
Phil Blundell | 78a56aa | 2007-01-18 00:44:09 -0500 | [diff] [blame] | 82 | pdata->buttons[i].desc ? pdata->buttons[i].desc : "gpio_keys", |
| 83 | pdev); |
| 84 | if (error) { |
| 85 | printk(KERN_ERR "gpio-keys: unable to claim irq %d; error %d\n", irq, ret); |
| 86 | goto fail; |
| 87 | } |
| 88 | set_bit(code, input->keybit); |
| 89 | } |
| 90 | |
| 91 | error = input_register_device(input); |
| 92 | if (error) { |
| 93 | printk(KERN_ERR "Unable to register gpio-keys input device\n"); |
| 94 | goto fail; |
| 95 | } |
| 96 | |
| 97 | return 0; |
| 98 | |
| 99 | fail: |
| 100 | for (i = i - 1; i >= 0; i--) |
| 101 | free_irq(IRQ_GPIO(pdata->buttons[i].gpio), pdev); |
| 102 | |
| 103 | input_free_device(input); |
| 104 | |
| 105 | return error; |
| 106 | } |
| 107 | |
| 108 | static int __devexit gpio_keys_remove(struct platform_device *pdev) |
| 109 | { |
| 110 | struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; |
| 111 | struct input_dev *input = platform_get_drvdata(pdev); |
| 112 | int i; |
| 113 | |
| 114 | for (i = 0; i < pdata->nbuttons; i++) { |
| 115 | int irq = IRQ_GPIO(pdata->buttons[i].gpio); |
| 116 | free_irq(irq, pdev); |
| 117 | } |
| 118 | |
| 119 | input_unregister_device(input); |
| 120 | |
| 121 | return 0; |
| 122 | } |
| 123 | |
| 124 | struct platform_driver gpio_keys_device_driver = { |
| 125 | .probe = gpio_keys_probe, |
| 126 | .remove = __devexit_p(gpio_keys_remove), |
| 127 | .driver = { |
| 128 | .name = "gpio-keys", |
| 129 | } |
| 130 | }; |
| 131 | |
| 132 | static int __init gpio_keys_init(void) |
| 133 | { |
| 134 | return platform_driver_register(&gpio_keys_device_driver); |
| 135 | } |
| 136 | |
| 137 | static void __exit gpio_keys_exit(void) |
| 138 | { |
| 139 | platform_driver_unregister(&gpio_keys_device_driver); |
| 140 | } |
| 141 | |
| 142 | module_init(gpio_keys_init); |
| 143 | module_exit(gpio_keys_exit); |
| 144 | |
| 145 | MODULE_LICENSE("GPL"); |
| 146 | MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>"); |
| 147 | MODULE_DESCRIPTION("Keyboard driver for CPU GPIOs"); |