Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 1 | /* |
| 2 | * Copyright IBM Corp. 2012 |
| 3 | * |
| 4 | * Author(s): |
| 5 | * Jan Glauber <jang@linux.vnet.ibm.com> |
| 6 | */ |
| 7 | |
Gerald Schaefer | 896cb7e | 2014-07-16 17:21:01 +0200 | [diff] [blame] | 8 | #define KMSG_COMPONENT "zpci" |
| 9 | #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 10 | |
Martin Schwidefsky | 988b86e6 | 2016-01-13 12:54:28 +0100 | [diff] [blame] | 11 | #include <linux/compat.h> |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 12 | #include <linux/kernel.h> |
Martin Schwidefsky | 988b86e6 | 2016-01-13 12:54:28 +0100 | [diff] [blame] | 13 | #include <linux/miscdevice.h> |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 14 | #include <linux/slab.h> |
| 15 | #include <linux/err.h> |
| 16 | #include <linux/delay.h> |
| 17 | #include <linux/pci.h> |
Martin Schwidefsky | 988b86e6 | 2016-01-13 12:54:28 +0100 | [diff] [blame] | 18 | #include <linux/uaccess.h> |
Sebastian Ott | a2ab833 | 2013-04-16 14:11:14 +0200 | [diff] [blame] | 19 | #include <asm/pci_debug.h> |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 20 | #include <asm/pci_clp.h> |
Martin Schwidefsky | 988b86e6 | 2016-01-13 12:54:28 +0100 | [diff] [blame] | 21 | #include <asm/compat.h> |
| 22 | #include <asm/clp.h> |
| 23 | #include <uapi/asm/clp.h> |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 24 | |
Sebastian Ott | 1f1dcbd | 2013-10-22 15:17:19 +0200 | [diff] [blame] | 25 | static inline void zpci_err_clp(unsigned int rsp, int rc) |
| 26 | { |
| 27 | struct { |
| 28 | unsigned int rsp; |
| 29 | int rc; |
| 30 | } __packed data = {rsp, rc}; |
| 31 | |
| 32 | zpci_err_hex(&data, sizeof(data)); |
| 33 | } |
| 34 | |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 35 | /* |
Martin Schwidefsky | 988b86e6 | 2016-01-13 12:54:28 +0100 | [diff] [blame] | 36 | * Call Logical Processor with c=1, lps=0 and command 1 |
| 37 | * to get the bit mask of installed logical processors |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 38 | */ |
Martin Schwidefsky | 988b86e6 | 2016-01-13 12:54:28 +0100 | [diff] [blame] | 39 | static inline int clp_get_ilp(unsigned long *ilp) |
| 40 | { |
| 41 | unsigned long mask; |
| 42 | int cc = 3; |
| 43 | |
| 44 | asm volatile ( |
| 45 | " .insn rrf,0xb9a00000,%[mask],%[cmd],8,0\n" |
| 46 | "0: ipm %[cc]\n" |
| 47 | " srl %[cc],28\n" |
| 48 | "1:\n" |
| 49 | EX_TABLE(0b, 1b) |
| 50 | : [cc] "+d" (cc), [mask] "=d" (mask) : [cmd] "a" (1) |
| 51 | : "cc"); |
| 52 | *ilp = mask; |
| 53 | return cc; |
| 54 | } |
| 55 | |
| 56 | /* |
| 57 | * Call Logical Processor with c=0, the give constant lps and an lpcb request. |
| 58 | */ |
| 59 | static inline int clp_req(void *data, unsigned int lps) |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 60 | { |
Sebastian Ott | bf4ec24 | 2013-01-31 19:53:12 +0100 | [diff] [blame] | 61 | struct { u8 _[CLP_BLK_SIZE]; } *req = data; |
| 62 | u64 ignored; |
Martin Schwidefsky | 988b86e6 | 2016-01-13 12:54:28 +0100 | [diff] [blame] | 63 | int cc = 3; |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 64 | |
| 65 | asm volatile ( |
Martin Schwidefsky | 988b86e6 | 2016-01-13 12:54:28 +0100 | [diff] [blame] | 66 | " .insn rrf,0xb9a00000,%[ign],%[req],0,%[lps]\n" |
| 67 | "0: ipm %[cc]\n" |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 68 | " srl %[cc],28\n" |
Martin Schwidefsky | 988b86e6 | 2016-01-13 12:54:28 +0100 | [diff] [blame] | 69 | "1:\n" |
| 70 | EX_TABLE(0b, 1b) |
| 71 | : [cc] "+d" (cc), [ign] "=d" (ignored), "+m" (*req) |
| 72 | : [req] "a" (req), [lps] "i" (lps) |
Sebastian Ott | bf4ec24 | 2013-01-31 19:53:12 +0100 | [diff] [blame] | 73 | : "cc"); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 74 | return cc; |
| 75 | } |
| 76 | |
Sebastian Ott | 1d57896 | 2013-08-29 19:37:28 +0200 | [diff] [blame] | 77 | static void *clp_alloc_block(gfp_t gfp_mask) |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 78 | { |
Sebastian Ott | 1d57896 | 2013-08-29 19:37:28 +0200 | [diff] [blame] | 79 | return (void *) __get_free_pages(gfp_mask, get_order(CLP_BLK_SIZE)); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 80 | } |
| 81 | |
| 82 | static void clp_free_block(void *ptr) |
| 83 | { |
| 84 | free_pages((unsigned long) ptr, get_order(CLP_BLK_SIZE)); |
| 85 | } |
| 86 | |
| 87 | static void clp_store_query_pci_fngrp(struct zpci_dev *zdev, |
| 88 | struct clp_rsp_query_pci_grp *response) |
| 89 | { |
Jan Glauber | 828b35f | 2012-11-29 14:33:30 +0100 | [diff] [blame] | 90 | zdev->tlb_refresh = response->refresh; |
| 91 | zdev->dma_mask = response->dasm; |
Jan Glauber | 9a4da8a | 2012-11-29 13:05:05 +0100 | [diff] [blame] | 92 | zdev->msi_addr = response->msia; |
Sebastian Ott | b19148f | 2014-10-29 19:12:04 +0100 | [diff] [blame] | 93 | zdev->max_msi = response->noi; |
Jan Glauber | d0b0885 | 2012-12-11 14:53:35 +0100 | [diff] [blame] | 94 | zdev->fmb_update = response->mui; |
Jan Glauber | 9a4da8a | 2012-11-29 13:05:05 +0100 | [diff] [blame] | 95 | |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 96 | switch (response->version) { |
| 97 | case 1: |
| 98 | zdev->max_bus_speed = PCIE_SPEED_5_0GT; |
| 99 | break; |
| 100 | default: |
| 101 | zdev->max_bus_speed = PCI_SPEED_UNKNOWN; |
| 102 | break; |
| 103 | } |
| 104 | } |
| 105 | |
| 106 | static int clp_query_pci_fngrp(struct zpci_dev *zdev, u8 pfgid) |
| 107 | { |
| 108 | struct clp_req_rsp_query_pci_grp *rrb; |
| 109 | int rc; |
| 110 | |
Sebastian Ott | 1d57896 | 2013-08-29 19:37:28 +0200 | [diff] [blame] | 111 | rrb = clp_alloc_block(GFP_KERNEL); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 112 | if (!rrb) |
| 113 | return -ENOMEM; |
| 114 | |
| 115 | memset(rrb, 0, sizeof(*rrb)); |
| 116 | rrb->request.hdr.len = sizeof(rrb->request); |
| 117 | rrb->request.hdr.cmd = CLP_QUERY_PCI_FNGRP; |
| 118 | rrb->response.hdr.len = sizeof(rrb->response); |
| 119 | rrb->request.pfgid = pfgid; |
| 120 | |
Martin Schwidefsky | 988b86e6 | 2016-01-13 12:54:28 +0100 | [diff] [blame] | 121 | rc = clp_req(rrb, CLP_LPS_PCI); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 122 | if (!rc && rrb->response.hdr.rsp == CLP_RC_OK) |
| 123 | clp_store_query_pci_fngrp(zdev, &rrb->response); |
| 124 | else { |
Sebastian Ott | 1f1dcbd | 2013-10-22 15:17:19 +0200 | [diff] [blame] | 125 | zpci_err("Q PCI FGRP:\n"); |
| 126 | zpci_err_clp(rrb->response.hdr.rsp, rc); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 127 | rc = -EIO; |
| 128 | } |
| 129 | clp_free_block(rrb); |
| 130 | return rc; |
| 131 | } |
| 132 | |
| 133 | static int clp_store_query_pci_fn(struct zpci_dev *zdev, |
| 134 | struct clp_rsp_query_pci *response) |
| 135 | { |
| 136 | int i; |
| 137 | |
| 138 | for (i = 0; i < PCI_BAR_COUNT; i++) { |
| 139 | zdev->bars[i].val = le32_to_cpu(response->bar[i]); |
| 140 | zdev->bars[i].size = response->bar_size[i]; |
| 141 | } |
Jan Glauber | 828b35f | 2012-11-29 14:33:30 +0100 | [diff] [blame] | 142 | zdev->start_dma = response->sdma; |
| 143 | zdev->end_dma = response->edma; |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 144 | zdev->pchid = response->pchid; |
| 145 | zdev->pfgid = response->pfgid; |
Sebastian Ott | ac4995b | 2014-04-16 16:12:05 +0200 | [diff] [blame] | 146 | zdev->pft = response->pft; |
| 147 | zdev->vfn = response->vfn; |
| 148 | zdev->uid = response->uid; |
| 149 | |
| 150 | memcpy(zdev->pfip, response->pfip, sizeof(zdev->pfip)); |
| 151 | if (response->util_str_avail) { |
| 152 | memcpy(zdev->util_str, response->util_str, |
| 153 | sizeof(zdev->util_str)); |
| 154 | } |
| 155 | |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 156 | return 0; |
| 157 | } |
| 158 | |
| 159 | static int clp_query_pci_fn(struct zpci_dev *zdev, u32 fh) |
| 160 | { |
| 161 | struct clp_req_rsp_query_pci *rrb; |
| 162 | int rc; |
| 163 | |
Sebastian Ott | 1d57896 | 2013-08-29 19:37:28 +0200 | [diff] [blame] | 164 | rrb = clp_alloc_block(GFP_KERNEL); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 165 | if (!rrb) |
| 166 | return -ENOMEM; |
| 167 | |
| 168 | memset(rrb, 0, sizeof(*rrb)); |
| 169 | rrb->request.hdr.len = sizeof(rrb->request); |
| 170 | rrb->request.hdr.cmd = CLP_QUERY_PCI_FN; |
| 171 | rrb->response.hdr.len = sizeof(rrb->response); |
| 172 | rrb->request.fh = fh; |
| 173 | |
Martin Schwidefsky | 988b86e6 | 2016-01-13 12:54:28 +0100 | [diff] [blame] | 174 | rc = clp_req(rrb, CLP_LPS_PCI); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 175 | if (!rc && rrb->response.hdr.rsp == CLP_RC_OK) { |
| 176 | rc = clp_store_query_pci_fn(zdev, &rrb->response); |
| 177 | if (rc) |
| 178 | goto out; |
Pierre Morel | aa624886 | 2016-03-16 13:56:35 +0100 | [diff] [blame] | 179 | rc = clp_query_pci_fngrp(zdev, rrb->response.pfgid); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 180 | } else { |
Sebastian Ott | 1f1dcbd | 2013-10-22 15:17:19 +0200 | [diff] [blame] | 181 | zpci_err("Q PCI FN:\n"); |
| 182 | zpci_err_clp(rrb->response.hdr.rsp, rc); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 183 | rc = -EIO; |
| 184 | } |
| 185 | out: |
| 186 | clp_free_block(rrb); |
| 187 | return rc; |
| 188 | } |
| 189 | |
| 190 | int clp_add_pci_device(u32 fid, u32 fh, int configured) |
| 191 | { |
| 192 | struct zpci_dev *zdev; |
| 193 | int rc; |
| 194 | |
Sebastian Ott | a2ab833 | 2013-04-16 14:11:14 +0200 | [diff] [blame] | 195 | zpci_dbg(3, "add fid:%x, fh:%x, c:%d\n", fid, fh, configured); |
Sebastian Ott | 7d59432 | 2013-11-12 19:35:01 +0100 | [diff] [blame] | 196 | zdev = kzalloc(sizeof(*zdev), GFP_KERNEL); |
| 197 | if (!zdev) |
| 198 | return -ENOMEM; |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 199 | |
| 200 | zdev->fh = fh; |
| 201 | zdev->fid = fid; |
| 202 | |
| 203 | /* Query function properties and update zdev */ |
| 204 | rc = clp_query_pci_fn(zdev, fh); |
| 205 | if (rc) |
| 206 | goto error; |
| 207 | |
| 208 | if (configured) |
| 209 | zdev->state = ZPCI_FN_STATE_CONFIGURED; |
| 210 | else |
| 211 | zdev->state = ZPCI_FN_STATE_STANDBY; |
| 212 | |
| 213 | rc = zpci_create_device(zdev); |
| 214 | if (rc) |
| 215 | goto error; |
| 216 | return 0; |
| 217 | |
| 218 | error: |
Sebastian Ott | 7d59432 | 2013-11-12 19:35:01 +0100 | [diff] [blame] | 219 | kfree(zdev); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 220 | return rc; |
| 221 | } |
| 222 | |
| 223 | /* |
| 224 | * Enable/Disable a given PCI function defined by its function handle. |
| 225 | */ |
| 226 | static int clp_set_pci_fn(u32 *fh, u8 nr_dma_as, u8 command) |
| 227 | { |
| 228 | struct clp_req_rsp_set_pci *rrb; |
Sebastian Ott | d03abe5 | 2013-08-29 19:38:33 +0200 | [diff] [blame] | 229 | int rc, retries = 100; |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 230 | |
Sebastian Ott | 1d57896 | 2013-08-29 19:37:28 +0200 | [diff] [blame] | 231 | rrb = clp_alloc_block(GFP_KERNEL); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 232 | if (!rrb) |
| 233 | return -ENOMEM; |
| 234 | |
| 235 | do { |
| 236 | memset(rrb, 0, sizeof(*rrb)); |
| 237 | rrb->request.hdr.len = sizeof(rrb->request); |
| 238 | rrb->request.hdr.cmd = CLP_SET_PCI_FN; |
| 239 | rrb->response.hdr.len = sizeof(rrb->response); |
| 240 | rrb->request.fh = *fh; |
| 241 | rrb->request.oc = command; |
| 242 | rrb->request.ndas = nr_dma_as; |
| 243 | |
Martin Schwidefsky | 988b86e6 | 2016-01-13 12:54:28 +0100 | [diff] [blame] | 244 | rc = clp_req(rrb, CLP_LPS_PCI); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 245 | if (rrb->response.hdr.rsp == CLP_RC_SETPCIFN_BUSY) { |
| 246 | retries--; |
| 247 | if (retries < 0) |
| 248 | break; |
Sebastian Ott | d03abe5 | 2013-08-29 19:38:33 +0200 | [diff] [blame] | 249 | msleep(20); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 250 | } |
| 251 | } while (rrb->response.hdr.rsp == CLP_RC_SETPCIFN_BUSY); |
| 252 | |
| 253 | if (!rc && rrb->response.hdr.rsp == CLP_RC_OK) |
| 254 | *fh = rrb->response.fh; |
| 255 | else { |
Sebastian Ott | 1f1dcbd | 2013-10-22 15:17:19 +0200 | [diff] [blame] | 256 | zpci_err("Set PCI FN:\n"); |
| 257 | zpci_err_clp(rrb->response.hdr.rsp, rc); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 258 | rc = -EIO; |
| 259 | } |
| 260 | clp_free_block(rrb); |
| 261 | return rc; |
| 262 | } |
| 263 | |
| 264 | int clp_enable_fh(struct zpci_dev *zdev, u8 nr_dma_as) |
| 265 | { |
| 266 | u32 fh = zdev->fh; |
| 267 | int rc; |
| 268 | |
| 269 | rc = clp_set_pci_fn(&fh, nr_dma_as, CLP_SET_ENABLE_PCI_FN); |
| 270 | if (!rc) |
| 271 | /* Success -> store enabled handle in zdev */ |
| 272 | zdev->fh = fh; |
Sebastian Ott | a2ab833 | 2013-04-16 14:11:14 +0200 | [diff] [blame] | 273 | |
| 274 | zpci_dbg(3, "ena fid:%x, fh:%x, rc:%d\n", zdev->fid, zdev->fh, rc); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 275 | return rc; |
| 276 | } |
| 277 | |
| 278 | int clp_disable_fh(struct zpci_dev *zdev) |
| 279 | { |
| 280 | u32 fh = zdev->fh; |
| 281 | int rc; |
| 282 | |
| 283 | if (!zdev_enabled(zdev)) |
| 284 | return 0; |
| 285 | |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 286 | rc = clp_set_pci_fn(&fh, 0, CLP_SET_DISABLE_PCI_FN); |
| 287 | if (!rc) |
| 288 | /* Success -> store disabled handle in zdev */ |
| 289 | zdev->fh = fh; |
Sebastian Ott | a2ab833 | 2013-04-16 14:11:14 +0200 | [diff] [blame] | 290 | |
| 291 | zpci_dbg(3, "dis fid:%x, fh:%x, rc:%d\n", zdev->fid, zdev->fh, rc); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 292 | return rc; |
| 293 | } |
| 294 | |
Sebastian Ott | 1d57896 | 2013-08-29 19:37:28 +0200 | [diff] [blame] | 295 | static int clp_list_pci(struct clp_req_rsp_list_pci *rrb, |
| 296 | void (*cb)(struct clp_fh_list_entry *entry)) |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 297 | { |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 298 | u64 resume_token = 0; |
| 299 | int entries, i, rc; |
| 300 | |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 301 | do { |
| 302 | memset(rrb, 0, sizeof(*rrb)); |
| 303 | rrb->request.hdr.len = sizeof(rrb->request); |
| 304 | rrb->request.hdr.cmd = CLP_LIST_PCI; |
| 305 | /* store as many entries as possible */ |
| 306 | rrb->response.hdr.len = CLP_BLK_SIZE - LIST_PCI_HDR_LEN; |
| 307 | rrb->request.resume_token = resume_token; |
| 308 | |
| 309 | /* Get PCI function handle list */ |
Martin Schwidefsky | 988b86e6 | 2016-01-13 12:54:28 +0100 | [diff] [blame] | 310 | rc = clp_req(rrb, CLP_LPS_PCI); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 311 | if (rc || rrb->response.hdr.rsp != CLP_RC_OK) { |
Sebastian Ott | 1f1dcbd | 2013-10-22 15:17:19 +0200 | [diff] [blame] | 312 | zpci_err("List PCI FN:\n"); |
| 313 | zpci_err_clp(rrb->response.hdr.rsp, rc); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 314 | rc = -EIO; |
| 315 | goto out; |
| 316 | } |
| 317 | |
| 318 | WARN_ON_ONCE(rrb->response.entry_size != |
| 319 | sizeof(struct clp_fh_list_entry)); |
| 320 | |
| 321 | entries = (rrb->response.hdr.len - LIST_PCI_HDR_LEN) / |
| 322 | rrb->response.entry_size; |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 323 | |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 324 | resume_token = rrb->response.resume_token; |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 325 | for (i = 0; i < entries; i++) |
Sebastian Ott | 1d57896 | 2013-08-29 19:37:28 +0200 | [diff] [blame] | 326 | cb(&rrb->response.fh_list[i]); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 327 | } while (resume_token); |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 328 | out: |
Sebastian Ott | 1d57896 | 2013-08-29 19:37:28 +0200 | [diff] [blame] | 329 | return rc; |
| 330 | } |
| 331 | |
| 332 | static void __clp_add(struct clp_fh_list_entry *entry) |
| 333 | { |
| 334 | if (!entry->vendor_id) |
| 335 | return; |
| 336 | |
| 337 | clp_add_pci_device(entry->fid, entry->fh, entry->config_state); |
| 338 | } |
| 339 | |
| 340 | static void __clp_rescan(struct clp_fh_list_entry *entry) |
| 341 | { |
| 342 | struct zpci_dev *zdev; |
| 343 | |
| 344 | if (!entry->vendor_id) |
| 345 | return; |
| 346 | |
| 347 | zdev = get_zdev_by_fid(entry->fid); |
| 348 | if (!zdev) { |
| 349 | clp_add_pci_device(entry->fid, entry->fh, entry->config_state); |
| 350 | return; |
| 351 | } |
| 352 | |
| 353 | if (!entry->config_state) { |
| 354 | /* |
| 355 | * The handle is already disabled, that means no iota/irq freeing via |
| 356 | * the firmware interfaces anymore. Need to free resources manually |
| 357 | * (DMA memory, debug, sysfs)... |
| 358 | */ |
| 359 | zpci_stop_device(zdev); |
| 360 | } |
| 361 | } |
| 362 | |
Sebastian Ott | 57b5918 | 2013-08-29 19:40:01 +0200 | [diff] [blame] | 363 | static void __clp_update(struct clp_fh_list_entry *entry) |
| 364 | { |
| 365 | struct zpci_dev *zdev; |
| 366 | |
| 367 | if (!entry->vendor_id) |
| 368 | return; |
| 369 | |
| 370 | zdev = get_zdev_by_fid(entry->fid); |
| 371 | if (!zdev) |
| 372 | return; |
| 373 | |
| 374 | zdev->fh = entry->fh; |
| 375 | } |
| 376 | |
Sebastian Ott | 1d57896 | 2013-08-29 19:37:28 +0200 | [diff] [blame] | 377 | int clp_scan_pci_devices(void) |
| 378 | { |
| 379 | struct clp_req_rsp_list_pci *rrb; |
| 380 | int rc; |
| 381 | |
| 382 | rrb = clp_alloc_block(GFP_KERNEL); |
| 383 | if (!rrb) |
| 384 | return -ENOMEM; |
| 385 | |
| 386 | rc = clp_list_pci(rrb, __clp_add); |
| 387 | |
| 388 | clp_free_block(rrb); |
| 389 | return rc; |
| 390 | } |
| 391 | |
| 392 | int clp_rescan_pci_devices(void) |
| 393 | { |
| 394 | struct clp_req_rsp_list_pci *rrb; |
| 395 | int rc; |
| 396 | |
| 397 | rrb = clp_alloc_block(GFP_KERNEL); |
| 398 | if (!rrb) |
| 399 | return -ENOMEM; |
| 400 | |
| 401 | rc = clp_list_pci(rrb, __clp_rescan); |
| 402 | |
Jan Glauber | a755a45 | 2012-11-29 12:55:21 +0100 | [diff] [blame] | 403 | clp_free_block(rrb); |
| 404 | return rc; |
| 405 | } |
Sebastian Ott | 57b5918 | 2013-08-29 19:40:01 +0200 | [diff] [blame] | 406 | |
| 407 | int clp_rescan_pci_devices_simple(void) |
| 408 | { |
| 409 | struct clp_req_rsp_list_pci *rrb; |
| 410 | int rc; |
| 411 | |
| 412 | rrb = clp_alloc_block(GFP_NOWAIT); |
| 413 | if (!rrb) |
| 414 | return -ENOMEM; |
| 415 | |
| 416 | rc = clp_list_pci(rrb, __clp_update); |
| 417 | |
| 418 | clp_free_block(rrb); |
| 419 | return rc; |
| 420 | } |
Martin Schwidefsky | 988b86e6 | 2016-01-13 12:54:28 +0100 | [diff] [blame] | 421 | |
| 422 | static int clp_base_slpc(struct clp_req *req, struct clp_req_rsp_slpc *lpcb) |
| 423 | { |
| 424 | unsigned long limit = PAGE_SIZE - sizeof(lpcb->request); |
| 425 | |
| 426 | if (lpcb->request.hdr.len != sizeof(lpcb->request) || |
| 427 | lpcb->response.hdr.len > limit) |
| 428 | return -EINVAL; |
| 429 | return clp_req(lpcb, CLP_LPS_BASE) ? -EOPNOTSUPP : 0; |
| 430 | } |
| 431 | |
| 432 | static int clp_base_command(struct clp_req *req, struct clp_req_hdr *lpcb) |
| 433 | { |
| 434 | switch (lpcb->cmd) { |
| 435 | case 0x0001: /* store logical-processor characteristics */ |
| 436 | return clp_base_slpc(req, (void *) lpcb); |
| 437 | default: |
| 438 | return -EINVAL; |
| 439 | } |
| 440 | } |
| 441 | |
| 442 | static int clp_pci_slpc(struct clp_req *req, struct clp_req_rsp_slpc *lpcb) |
| 443 | { |
| 444 | unsigned long limit = PAGE_SIZE - sizeof(lpcb->request); |
| 445 | |
| 446 | if (lpcb->request.hdr.len != sizeof(lpcb->request) || |
| 447 | lpcb->response.hdr.len > limit) |
| 448 | return -EINVAL; |
| 449 | return clp_req(lpcb, CLP_LPS_PCI) ? -EOPNOTSUPP : 0; |
| 450 | } |
| 451 | |
| 452 | static int clp_pci_list(struct clp_req *req, struct clp_req_rsp_list_pci *lpcb) |
| 453 | { |
| 454 | unsigned long limit = PAGE_SIZE - sizeof(lpcb->request); |
| 455 | |
| 456 | if (lpcb->request.hdr.len != sizeof(lpcb->request) || |
| 457 | lpcb->response.hdr.len > limit) |
| 458 | return -EINVAL; |
| 459 | if (lpcb->request.reserved2 != 0) |
| 460 | return -EINVAL; |
| 461 | return clp_req(lpcb, CLP_LPS_PCI) ? -EOPNOTSUPP : 0; |
| 462 | } |
| 463 | |
| 464 | static int clp_pci_query(struct clp_req *req, |
| 465 | struct clp_req_rsp_query_pci *lpcb) |
| 466 | { |
| 467 | unsigned long limit = PAGE_SIZE - sizeof(lpcb->request); |
| 468 | |
| 469 | if (lpcb->request.hdr.len != sizeof(lpcb->request) || |
| 470 | lpcb->response.hdr.len > limit) |
| 471 | return -EINVAL; |
| 472 | if (lpcb->request.reserved2 != 0 || lpcb->request.reserved3 != 0) |
| 473 | return -EINVAL; |
| 474 | return clp_req(lpcb, CLP_LPS_PCI) ? -EOPNOTSUPP : 0; |
| 475 | } |
| 476 | |
| 477 | static int clp_pci_query_grp(struct clp_req *req, |
| 478 | struct clp_req_rsp_query_pci_grp *lpcb) |
| 479 | { |
| 480 | unsigned long limit = PAGE_SIZE - sizeof(lpcb->request); |
| 481 | |
| 482 | if (lpcb->request.hdr.len != sizeof(lpcb->request) || |
| 483 | lpcb->response.hdr.len > limit) |
| 484 | return -EINVAL; |
| 485 | if (lpcb->request.reserved2 != 0 || lpcb->request.reserved3 != 0 || |
| 486 | lpcb->request.reserved4 != 0) |
| 487 | return -EINVAL; |
| 488 | return clp_req(lpcb, CLP_LPS_PCI) ? -EOPNOTSUPP : 0; |
| 489 | } |
| 490 | |
| 491 | static int clp_pci_command(struct clp_req *req, struct clp_req_hdr *lpcb) |
| 492 | { |
| 493 | switch (lpcb->cmd) { |
| 494 | case 0x0001: /* store logical-processor characteristics */ |
| 495 | return clp_pci_slpc(req, (void *) lpcb); |
| 496 | case 0x0002: /* list PCI functions */ |
| 497 | return clp_pci_list(req, (void *) lpcb); |
| 498 | case 0x0003: /* query PCI function */ |
| 499 | return clp_pci_query(req, (void *) lpcb); |
| 500 | case 0x0004: /* query PCI function group */ |
| 501 | return clp_pci_query_grp(req, (void *) lpcb); |
| 502 | default: |
| 503 | return -EINVAL; |
| 504 | } |
| 505 | } |
| 506 | |
| 507 | static int clp_normal_command(struct clp_req *req) |
| 508 | { |
| 509 | struct clp_req_hdr *lpcb; |
| 510 | void __user *uptr; |
| 511 | int rc; |
| 512 | |
| 513 | rc = -EINVAL; |
| 514 | if (req->lps != 0 && req->lps != 2) |
| 515 | goto out; |
| 516 | |
| 517 | rc = -ENOMEM; |
| 518 | lpcb = clp_alloc_block(GFP_KERNEL); |
| 519 | if (!lpcb) |
| 520 | goto out; |
| 521 | |
| 522 | rc = -EFAULT; |
| 523 | uptr = (void __force __user *)(unsigned long) req->data_p; |
| 524 | if (copy_from_user(lpcb, uptr, PAGE_SIZE) != 0) |
| 525 | goto out_free; |
| 526 | |
| 527 | rc = -EINVAL; |
| 528 | if (lpcb->fmt != 0 || lpcb->reserved1 != 0 || lpcb->reserved2 != 0) |
| 529 | goto out_free; |
| 530 | |
| 531 | switch (req->lps) { |
| 532 | case 0: |
| 533 | rc = clp_base_command(req, lpcb); |
| 534 | break; |
| 535 | case 2: |
| 536 | rc = clp_pci_command(req, lpcb); |
| 537 | break; |
| 538 | } |
| 539 | if (rc) |
| 540 | goto out_free; |
| 541 | |
| 542 | rc = -EFAULT; |
| 543 | if (copy_to_user(uptr, lpcb, PAGE_SIZE) != 0) |
| 544 | goto out_free; |
| 545 | |
| 546 | rc = 0; |
| 547 | |
| 548 | out_free: |
| 549 | clp_free_block(lpcb); |
| 550 | out: |
| 551 | return rc; |
| 552 | } |
| 553 | |
| 554 | static int clp_immediate_command(struct clp_req *req) |
| 555 | { |
| 556 | void __user *uptr; |
| 557 | unsigned long ilp; |
| 558 | int exists; |
| 559 | |
| 560 | if (req->cmd > 1 || clp_get_ilp(&ilp) != 0) |
| 561 | return -EINVAL; |
| 562 | |
| 563 | uptr = (void __force __user *)(unsigned long) req->data_p; |
| 564 | if (req->cmd == 0) { |
| 565 | /* Command code 0: test for a specific processor */ |
| 566 | exists = test_bit_inv(req->lps, &ilp); |
| 567 | return put_user(exists, (int __user *) uptr); |
| 568 | } |
| 569 | /* Command code 1: return bit mask of installed processors */ |
| 570 | return put_user(ilp, (unsigned long __user *) uptr); |
| 571 | } |
| 572 | |
| 573 | static long clp_misc_ioctl(struct file *filp, unsigned int cmd, |
| 574 | unsigned long arg) |
| 575 | { |
| 576 | struct clp_req req; |
| 577 | void __user *argp; |
| 578 | |
| 579 | if (cmd != CLP_SYNC) |
| 580 | return -EINVAL; |
| 581 | |
| 582 | argp = is_compat_task() ? compat_ptr(arg) : (void __user *) arg; |
| 583 | if (copy_from_user(&req, argp, sizeof(req))) |
| 584 | return -EFAULT; |
| 585 | if (req.r != 0) |
| 586 | return -EINVAL; |
| 587 | return req.c ? clp_immediate_command(&req) : clp_normal_command(&req); |
| 588 | } |
| 589 | |
| 590 | static int clp_misc_release(struct inode *inode, struct file *filp) |
| 591 | { |
| 592 | return 0; |
| 593 | } |
| 594 | |
| 595 | static const struct file_operations clp_misc_fops = { |
| 596 | .owner = THIS_MODULE, |
| 597 | .open = nonseekable_open, |
| 598 | .release = clp_misc_release, |
| 599 | .unlocked_ioctl = clp_misc_ioctl, |
| 600 | .compat_ioctl = clp_misc_ioctl, |
| 601 | .llseek = no_llseek, |
| 602 | }; |
| 603 | |
| 604 | static struct miscdevice clp_misc_device = { |
| 605 | .minor = MISC_DYNAMIC_MINOR, |
| 606 | .name = "clp", |
| 607 | .fops = &clp_misc_fops, |
| 608 | }; |
| 609 | |
| 610 | static int __init clp_misc_init(void) |
| 611 | { |
| 612 | return misc_register(&clp_misc_device); |
| 613 | } |
| 614 | |
| 615 | device_initcall(clp_misc_init); |