blob: 596f3a32a1c61ffbf64e1c593159bdc8e6e3d208 [file] [log] [blame]
Linus Torvalds1da177e2005-04-16 15:20:36 -07001/*
2 * Trantor T128/T128F/T228 defines
3 * Note : architecturally, the T100 and T128 are different and won't work
4 *
5 * Copyright 1993, Drew Eckhardt
6 * Visionary Computing
7 * (Unix and Linux consulting and custom programming)
8 * drew@colorado.edu
9 * +1 (303) 440-4894
10 *
11 * DISTRIBUTION RELEASE 3.
12 *
13 * For more information, please consult
14 *
15 * Trantor Systems, Ltd.
16 * T128/T128F/T228 SCSI Host Adapter
17 * Hardware Specifications
18 *
19 * Trantor Systems, Ltd.
20 * 5415 Randall Place
21 * Fremont, CA 94538
22 * 1+ (415) 770-1400, FAX 1+ (415) 770-9910
23 *
24 * and
25 *
26 * NCR 5380 Family
27 * SCSI Protocol Controller
28 * Databook
29 *
30 * NCR Microelectronics
31 * 1635 Aeroplaza Drive
32 * Colorado Springs, CO 80916
33 * 1+ (719) 578-3400
34 * 1+ (800) 334-5454
35 */
36
37/*
38 * $Log: t128.h,v $
39 */
40
41#ifndef T128_H
42#define T128_H
43
44#define T128_PUBLIC_RELEASE 3
45
Olaf Hering44456d32005-07-27 11:45:17 -070046#define TDEBUG 0
Linus Torvalds1da177e2005-04-16 15:20:36 -070047#define TDEBUG_INIT 0x1
48#define TDEBUG_TRANSFER 0x2
49
50/*
51 * The trantor boards are memory mapped. They use an NCR5380 or
52 * equivalent (my sample board had part second sourced from ZILOG).
53 * NCR's recommended "Pseudo-DMA" architecture is used, where
54 * a PAL drives the DMA signals on the 5380 allowing fast, blind
55 * transfers with proper handshaking.
56 */
57
58/*
59 * Note : a boot switch is provided for the purpose of informing the
60 * firmware to boot or not boot from attached SCSI devices. So, I imagine
61 * there are fewer people who've yanked the ROM like they do on the Seagate
62 * to make bootup faster, and I'll probably use this for autodetection.
63 */
64#define T_ROM_OFFSET 0
65
66/*
67 * Note : my sample board *WAS NOT* populated with the SRAM, so this
68 * can't be used for autodetection without a ROM present.
69 */
70#define T_RAM_OFFSET 0x1800
71
72/*
73 * All of the registers are allocated 32 bytes of address space, except
74 * for the data register (read/write to/from the 5380 in pseudo-DMA mode)
75 */
76#define T_CONTROL_REG_OFFSET 0x1c00 /* rw */
77#define T_CR_INT 0x10 /* Enable interrupts */
78#define T_CR_CT 0x02 /* Reset watchdog timer */
79
80#define T_STATUS_REG_OFFSET 0x1c20 /* ro */
81#define T_ST_BOOT 0x80 /* Boot switch */
82#define T_ST_S3 0x40 /* User settable switches, */
83#define T_ST_S2 0x20 /* read 0 when switch is on, 1 off */
84#define T_ST_S1 0x10
85#define T_ST_PS2 0x08 /* Set for Microchannel 228 */
86#define T_ST_RDY 0x04 /* 5380 DRQ */
87#define T_ST_TIM 0x02 /* indicates 40us watchdog timer fired */
88#define T_ST_ZERO 0x01 /* Always zero */
89
90#define T_5380_OFFSET 0x1d00 /* 8 registers here, see NCR5380.h */
91
92#define T_DATA_REG_OFFSET 0x1e00 /* rw 512 bytes long */
93
94#ifndef ASM
95static int t128_abort(Scsi_Cmnd *);
96static int t128_biosparam(struct scsi_device *, struct block_device *,
97 sector_t, int*);
98static int t128_detect(Scsi_Host_Template *);
99static int t128_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
Linus Torvalds1da177e2005-04-16 15:20:36 -0700100static int t128_bus_reset(Scsi_Cmnd *);
Linus Torvalds1da177e2005-04-16 15:20:36 -0700101
102#ifndef CMD_PER_LUN
103#define CMD_PER_LUN 2
104#endif
105
106#ifndef CAN_QUEUE
107#define CAN_QUEUE 32
108#endif
109
110#ifndef HOSTS_C
111
112#define NCR5380_implementation_fields \
113 void __iomem *base
114
115#define NCR5380_local_declare() \
116 void __iomem *base
117
118#define NCR5380_setup(instance) \
119 base = ((struct NCR5380_hostdata *)(instance->hostdata))->base
120
121#define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20))
122
123#if !(TDEBUG & TDEBUG_TRANSFER)
124#define NCR5380_read(reg) readb(T128_address(reg))
125#define NCR5380_write(reg, value) writeb((value),(T128_address(reg)))
126#else
127#define NCR5380_read(reg) \
128 (((unsigned char) printk("scsi%d : read register %d at address %08x\n"\
129 , instance->hostno, (reg), T128_address(reg))), readb(T128_address(reg)))
130
131#define NCR5380_write(reg, value) { \
132 printk("scsi%d : write %02x to register %d at address %08x\n", \
133 instance->hostno, (value), (reg), T128_address(reg)); \
134 writeb((value), (T128_address(reg))); \
135}
136#endif
137
138#define NCR5380_intr t128_intr
139#define do_NCR5380_intr do_t128_intr
140#define NCR5380_queue_command t128_queue_command
141#define NCR5380_abort t128_abort
Linus Torvalds1da177e2005-04-16 15:20:36 -0700142#define NCR5380_bus_reset t128_bus_reset
143#define NCR5380_proc_info t128_proc_info
144
145/* 15 14 12 10 7 5 3
146 1101 0100 1010 1000 */
147
148#define T128_IRQS 0xc4a8
149
150#endif /* else def HOSTS_C */
151#endif /* ndef ASM */
152#endif /* T128_H */