Cyril Chemparathy | 03df0f6 | 2011-01-18 19:21:35 +0000 | [diff] [blame] | 1 | /* |
| 2 | * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs |
| 3 | * |
| 4 | * Copyright (C) 2010 Texas Instruments Inc |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify |
| 7 | * it under the terms of the GNU General Public License as published by |
| 8 | * the Free Software Foundation; either version 2 of the License, or |
| 9 | * (at your option) any later version. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
| 15 | * |
| 16 | * You should have received a copy of the GNU General Public License |
| 17 | * along with this program; if not, write to the Free Software |
| 18 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| 19 | */ |
| 20 | |
| 21 | #include <linux/errno.h> |
| 22 | #include <linux/kernel.h> |
| 23 | #include <linux/module.h> |
| 24 | #include <linux/slab.h> |
| 25 | #include <linux/err.h> |
| 26 | #include <linux/init.h> |
| 27 | #include <linux/wait.h> |
| 28 | #include <linux/clk.h> |
| 29 | #include <linux/interrupt.h> |
| 30 | #include <linux/device.h> |
| 31 | #include <linux/spinlock.h> |
| 32 | #include <linux/platform_device.h> |
| 33 | #include <linux/delay.h> |
| 34 | #include <linux/io.h> |
| 35 | #include <linux/mfd/core.h> |
| 36 | #include <linux/mfd/ti_ssp.h> |
| 37 | |
| 38 | /* Register Offsets */ |
| 39 | #define REG_REV 0x00 |
| 40 | #define REG_IOSEL_1 0x04 |
| 41 | #define REG_IOSEL_2 0x08 |
| 42 | #define REG_PREDIV 0x0c |
| 43 | #define REG_INTR_ST 0x10 |
| 44 | #define REG_INTR_EN 0x14 |
| 45 | #define REG_TEST_CTRL 0x18 |
| 46 | |
| 47 | /* Per port registers */ |
| 48 | #define PORT_CFG_2 0x00 |
| 49 | #define PORT_ADDR 0x04 |
| 50 | #define PORT_DATA 0x08 |
| 51 | #define PORT_CFG_1 0x0c |
| 52 | #define PORT_STATE 0x10 |
| 53 | |
| 54 | #define SSP_PORT_CONFIG_MASK (SSP_EARLY_DIN | SSP_DELAY_DOUT) |
| 55 | #define SSP_PORT_CLKRATE_MASK 0x0f |
| 56 | |
| 57 | #define SSP_SEQRAM_WR_EN BIT(4) |
| 58 | #define SSP_SEQRAM_RD_EN BIT(5) |
| 59 | #define SSP_START BIT(15) |
| 60 | #define SSP_BUSY BIT(10) |
| 61 | #define SSP_PORT_ASL BIT(7) |
| 62 | #define SSP_PORT_CFO1 BIT(6) |
| 63 | |
| 64 | #define SSP_PORT_SEQRAM_SIZE 32 |
| 65 | |
| 66 | static const int ssp_port_base[] = {0x040, 0x080}; |
| 67 | static const int ssp_port_seqram[] = {0x100, 0x180}; |
| 68 | |
| 69 | struct ti_ssp { |
| 70 | struct resource *res; |
| 71 | struct device *dev; |
| 72 | void __iomem *regs; |
| 73 | spinlock_t lock; |
| 74 | struct clk *clk; |
| 75 | int irq; |
| 76 | wait_queue_head_t wqh; |
| 77 | |
| 78 | /* |
| 79 | * Some of the iosel2 register bits always read-back as 0, we need to |
| 80 | * remember these values so that we don't clobber previously set |
| 81 | * values. |
| 82 | */ |
| 83 | u32 iosel2; |
| 84 | }; |
| 85 | |
| 86 | static inline struct ti_ssp *dev_to_ssp(struct device *dev) |
| 87 | { |
| 88 | return dev_get_drvdata(dev->parent); |
| 89 | } |
| 90 | |
| 91 | static inline int dev_to_port(struct device *dev) |
| 92 | { |
| 93 | return to_platform_device(dev)->id; |
| 94 | } |
| 95 | |
| 96 | /* Register Access Helpers, rmw() functions need to run locked */ |
| 97 | static inline u32 ssp_read(struct ti_ssp *ssp, int reg) |
| 98 | { |
| 99 | return __raw_readl(ssp->regs + reg); |
| 100 | } |
| 101 | |
| 102 | static inline void ssp_write(struct ti_ssp *ssp, int reg, u32 val) |
| 103 | { |
| 104 | __raw_writel(val, ssp->regs + reg); |
| 105 | } |
| 106 | |
| 107 | static inline void ssp_rmw(struct ti_ssp *ssp, int reg, u32 mask, u32 bits) |
| 108 | { |
| 109 | ssp_write(ssp, reg, (ssp_read(ssp, reg) & ~mask) | bits); |
| 110 | } |
| 111 | |
| 112 | static inline u32 ssp_port_read(struct ti_ssp *ssp, int port, int reg) |
| 113 | { |
| 114 | return ssp_read(ssp, ssp_port_base[port] + reg); |
| 115 | } |
| 116 | |
| 117 | static inline void ssp_port_write(struct ti_ssp *ssp, int port, int reg, |
| 118 | u32 val) |
| 119 | { |
| 120 | ssp_write(ssp, ssp_port_base[port] + reg, val); |
| 121 | } |
| 122 | |
| 123 | static inline void ssp_port_rmw(struct ti_ssp *ssp, int port, int reg, |
| 124 | u32 mask, u32 bits) |
| 125 | { |
| 126 | ssp_rmw(ssp, ssp_port_base[port] + reg, mask, bits); |
| 127 | } |
| 128 | |
| 129 | static inline void ssp_port_clr_bits(struct ti_ssp *ssp, int port, int reg, |
| 130 | u32 bits) |
| 131 | { |
| 132 | ssp_port_rmw(ssp, port, reg, bits, 0); |
| 133 | } |
| 134 | |
| 135 | static inline void ssp_port_set_bits(struct ti_ssp *ssp, int port, int reg, |
| 136 | u32 bits) |
| 137 | { |
| 138 | ssp_port_rmw(ssp, port, reg, 0, bits); |
| 139 | } |
| 140 | |
| 141 | /* Called to setup port clock mode, caller must hold ssp->lock */ |
| 142 | static int __set_mode(struct ti_ssp *ssp, int port, int mode) |
| 143 | { |
| 144 | mode &= SSP_PORT_CONFIG_MASK; |
| 145 | ssp_port_rmw(ssp, port, PORT_CFG_1, SSP_PORT_CONFIG_MASK, mode); |
| 146 | |
| 147 | return 0; |
| 148 | } |
| 149 | |
| 150 | int ti_ssp_set_mode(struct device *dev, int mode) |
| 151 | { |
| 152 | struct ti_ssp *ssp = dev_to_ssp(dev); |
| 153 | int port = dev_to_port(dev); |
| 154 | int ret; |
| 155 | |
| 156 | spin_lock(&ssp->lock); |
| 157 | ret = __set_mode(ssp, port, mode); |
| 158 | spin_unlock(&ssp->lock); |
| 159 | |
| 160 | return ret; |
| 161 | } |
| 162 | EXPORT_SYMBOL(ti_ssp_set_mode); |
| 163 | |
| 164 | /* Called to setup iosel2, caller must hold ssp->lock */ |
| 165 | static void __set_iosel2(struct ti_ssp *ssp, u32 mask, u32 val) |
| 166 | { |
| 167 | ssp->iosel2 = (ssp->iosel2 & ~mask) | val; |
| 168 | ssp_write(ssp, REG_IOSEL_2, ssp->iosel2); |
| 169 | } |
| 170 | |
| 171 | /* Called to setup port iosel, caller must hold ssp->lock */ |
| 172 | static void __set_iosel(struct ti_ssp *ssp, int port, u32 iosel) |
| 173 | { |
| 174 | unsigned val, shift = port ? 16 : 0; |
| 175 | |
| 176 | /* IOSEL1 gets the least significant 16 bits */ |
| 177 | val = ssp_read(ssp, REG_IOSEL_1); |
| 178 | val &= 0xffff << (port ? 0 : 16); |
| 179 | val |= (iosel & 0xffff) << (port ? 16 : 0); |
| 180 | ssp_write(ssp, REG_IOSEL_1, val); |
| 181 | |
| 182 | /* IOSEL2 gets the most significant 16 bits */ |
| 183 | val = (iosel >> 16) & 0x7; |
| 184 | __set_iosel2(ssp, 0x7 << shift, val << shift); |
| 185 | } |
| 186 | |
| 187 | int ti_ssp_set_iosel(struct device *dev, u32 iosel) |
| 188 | { |
| 189 | struct ti_ssp *ssp = dev_to_ssp(dev); |
| 190 | int port = dev_to_port(dev); |
| 191 | |
| 192 | spin_lock(&ssp->lock); |
| 193 | __set_iosel(ssp, port, iosel); |
| 194 | spin_unlock(&ssp->lock); |
| 195 | |
| 196 | return 0; |
| 197 | } |
| 198 | EXPORT_SYMBOL(ti_ssp_set_iosel); |
| 199 | |
| 200 | int ti_ssp_load(struct device *dev, int offs, u32* prog, int len) |
| 201 | { |
| 202 | struct ti_ssp *ssp = dev_to_ssp(dev); |
| 203 | int port = dev_to_port(dev); |
| 204 | int i; |
| 205 | |
| 206 | if (len > SSP_PORT_SEQRAM_SIZE) |
| 207 | return -ENOSPC; |
| 208 | |
| 209 | spin_lock(&ssp->lock); |
| 210 | |
| 211 | /* Enable SeqRAM access */ |
| 212 | ssp_port_set_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN); |
| 213 | |
| 214 | /* Copy code */ |
| 215 | for (i = 0; i < len; i++) { |
| 216 | __raw_writel(prog[i], ssp->regs + offs + 4*i + |
| 217 | ssp_port_seqram[port]); |
| 218 | } |
| 219 | |
| 220 | /* Disable SeqRAM access */ |
| 221 | ssp_port_clr_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN); |
| 222 | |
| 223 | spin_unlock(&ssp->lock); |
| 224 | |
| 225 | return 0; |
| 226 | } |
| 227 | EXPORT_SYMBOL(ti_ssp_load); |
| 228 | |
| 229 | int ti_ssp_raw_read(struct device *dev) |
| 230 | { |
| 231 | struct ti_ssp *ssp = dev_to_ssp(dev); |
| 232 | int port = dev_to_port(dev); |
| 233 | int shift = port ? 27 : 11; |
| 234 | |
| 235 | return (ssp_read(ssp, REG_IOSEL_2) >> shift) & 0xf; |
| 236 | } |
| 237 | EXPORT_SYMBOL(ti_ssp_raw_read); |
| 238 | |
| 239 | int ti_ssp_raw_write(struct device *dev, u32 val) |
| 240 | { |
| 241 | struct ti_ssp *ssp = dev_to_ssp(dev); |
| 242 | int port = dev_to_port(dev), shift; |
| 243 | |
| 244 | spin_lock(&ssp->lock); |
| 245 | |
| 246 | shift = port ? 22 : 6; |
| 247 | val &= 0xf; |
| 248 | __set_iosel2(ssp, 0xf << shift, val << shift); |
| 249 | |
| 250 | spin_unlock(&ssp->lock); |
| 251 | |
| 252 | return 0; |
| 253 | } |
| 254 | EXPORT_SYMBOL(ti_ssp_raw_write); |
| 255 | |
| 256 | static inline int __xfer_done(struct ti_ssp *ssp, int port) |
| 257 | { |
| 258 | return !(ssp_port_read(ssp, port, PORT_CFG_1) & SSP_BUSY); |
| 259 | } |
| 260 | |
| 261 | int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output) |
| 262 | { |
| 263 | struct ti_ssp *ssp = dev_to_ssp(dev); |
| 264 | int port = dev_to_port(dev); |
| 265 | int ret; |
| 266 | |
| 267 | if (pc & ~(0x3f)) |
| 268 | return -EINVAL; |
| 269 | |
| 270 | /* Grab ssp->lock to serialize rmw on ssp registers */ |
| 271 | spin_lock(&ssp->lock); |
| 272 | |
| 273 | ssp_port_write(ssp, port, PORT_ADDR, input >> 16); |
| 274 | ssp_port_write(ssp, port, PORT_DATA, input & 0xffff); |
| 275 | ssp_port_rmw(ssp, port, PORT_CFG_1, 0x3f, pc); |
| 276 | |
| 277 | /* grab wait queue head lock to avoid race with the isr */ |
| 278 | spin_lock_irq(&ssp->wqh.lock); |
| 279 | |
| 280 | /* kick off sequence execution in hardware */ |
| 281 | ssp_port_set_bits(ssp, port, PORT_CFG_1, SSP_START); |
| 282 | |
| 283 | /* drop ssp lock; no register writes beyond this */ |
| 284 | spin_unlock(&ssp->lock); |
| 285 | |
| 286 | ret = wait_event_interruptible_locked_irq(ssp->wqh, |
| 287 | __xfer_done(ssp, port)); |
| 288 | spin_unlock_irq(&ssp->wqh.lock); |
| 289 | |
| 290 | if (ret < 0) |
| 291 | return ret; |
| 292 | |
| 293 | if (output) { |
| 294 | *output = (ssp_port_read(ssp, port, PORT_ADDR) << 16) | |
| 295 | (ssp_port_read(ssp, port, PORT_DATA) & 0xffff); |
| 296 | } |
| 297 | |
| 298 | ret = ssp_port_read(ssp, port, PORT_STATE) & 0x3f; /* stop address */ |
| 299 | |
| 300 | return ret; |
| 301 | } |
| 302 | EXPORT_SYMBOL(ti_ssp_run); |
| 303 | |
| 304 | static irqreturn_t ti_ssp_interrupt(int irq, void *dev_data) |
| 305 | { |
| 306 | struct ti_ssp *ssp = dev_data; |
| 307 | |
| 308 | spin_lock(&ssp->wqh.lock); |
| 309 | |
| 310 | ssp_write(ssp, REG_INTR_ST, 0x3); |
| 311 | wake_up_locked(&ssp->wqh); |
| 312 | |
| 313 | spin_unlock(&ssp->wqh.lock); |
| 314 | |
| 315 | return IRQ_HANDLED; |
| 316 | } |
| 317 | |
Bill Pemberton | f791be4 | 2012-11-19 13:23:04 -0500 | [diff] [blame] | 318 | static int ti_ssp_probe(struct platform_device *pdev) |
Cyril Chemparathy | 03df0f6 | 2011-01-18 19:21:35 +0000 | [diff] [blame] | 319 | { |
| 320 | static struct ti_ssp *ssp; |
| 321 | const struct ti_ssp_data *pdata = pdev->dev.platform_data; |
| 322 | int error = 0, prediv = 0xff, id; |
| 323 | unsigned long sysclk; |
| 324 | struct device *dev = &pdev->dev; |
| 325 | struct mfd_cell cells[2]; |
| 326 | |
| 327 | ssp = kzalloc(sizeof(*ssp), GFP_KERNEL); |
| 328 | if (!ssp) { |
| 329 | dev_err(dev, "cannot allocate device info\n"); |
| 330 | return -ENOMEM; |
| 331 | } |
| 332 | |
| 333 | ssp->dev = dev; |
| 334 | dev_set_drvdata(dev, ssp); |
| 335 | |
| 336 | ssp->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 337 | if (!ssp->res) { |
| 338 | error = -ENODEV; |
| 339 | dev_err(dev, "cannot determine register area\n"); |
| 340 | goto error_res; |
| 341 | } |
| 342 | |
| 343 | if (!request_mem_region(ssp->res->start, resource_size(ssp->res), |
| 344 | pdev->name)) { |
| 345 | error = -ENOMEM; |
| 346 | dev_err(dev, "cannot claim register memory\n"); |
| 347 | goto error_res; |
| 348 | } |
| 349 | |
| 350 | ssp->regs = ioremap(ssp->res->start, resource_size(ssp->res)); |
| 351 | if (!ssp->regs) { |
| 352 | error = -ENOMEM; |
| 353 | dev_err(dev, "cannot map register memory\n"); |
| 354 | goto error_map; |
| 355 | } |
| 356 | |
| 357 | ssp->clk = clk_get(dev, NULL); |
| 358 | if (IS_ERR(ssp->clk)) { |
| 359 | error = PTR_ERR(ssp->clk); |
| 360 | dev_err(dev, "cannot claim device clock\n"); |
| 361 | goto error_clk; |
| 362 | } |
| 363 | |
| 364 | ssp->irq = platform_get_irq(pdev, 0); |
| 365 | if (ssp->irq < 0) { |
| 366 | error = -ENODEV; |
| 367 | dev_err(dev, "unknown irq\n"); |
| 368 | goto error_irq; |
| 369 | } |
| 370 | |
| 371 | error = request_threaded_irq(ssp->irq, NULL, ti_ssp_interrupt, 0, |
| 372 | dev_name(dev), ssp); |
| 373 | if (error < 0) { |
| 374 | dev_err(dev, "cannot acquire irq\n"); |
| 375 | goto error_irq; |
| 376 | } |
| 377 | |
| 378 | spin_lock_init(&ssp->lock); |
| 379 | init_waitqueue_head(&ssp->wqh); |
| 380 | |
| 381 | /* Power on and initialize SSP */ |
| 382 | error = clk_enable(ssp->clk); |
| 383 | if (error) { |
| 384 | dev_err(dev, "cannot enable device clock\n"); |
| 385 | goto error_enable; |
| 386 | } |
| 387 | |
| 388 | /* Reset registers to a sensible known state */ |
| 389 | ssp_write(ssp, REG_IOSEL_1, 0); |
| 390 | ssp_write(ssp, REG_IOSEL_2, 0); |
| 391 | ssp_write(ssp, REG_INTR_EN, 0x3); |
| 392 | ssp_write(ssp, REG_INTR_ST, 0x3); |
| 393 | ssp_write(ssp, REG_TEST_CTRL, 0); |
| 394 | ssp_port_write(ssp, 0, PORT_CFG_1, SSP_PORT_ASL); |
| 395 | ssp_port_write(ssp, 1, PORT_CFG_1, SSP_PORT_ASL); |
| 396 | ssp_port_write(ssp, 0, PORT_CFG_2, SSP_PORT_CFO1); |
| 397 | ssp_port_write(ssp, 1, PORT_CFG_2, SSP_PORT_CFO1); |
| 398 | |
| 399 | sysclk = clk_get_rate(ssp->clk); |
| 400 | if (pdata && pdata->out_clock) |
| 401 | prediv = (sysclk / pdata->out_clock) - 1; |
| 402 | prediv = clamp(prediv, 0, 0xff); |
| 403 | ssp_rmw(ssp, REG_PREDIV, 0xff, prediv); |
| 404 | |
| 405 | memset(cells, 0, sizeof(cells)); |
| 406 | for (id = 0; id < 2; id++) { |
| 407 | const struct ti_ssp_dev_data *data = &pdata->dev_data[id]; |
| 408 | |
| 409 | cells[id].id = id; |
| 410 | cells[id].name = data->dev_name; |
| 411 | cells[id].platform_data = data->pdata; |
| 412 | cells[id].data_size = data->pdata_size; |
| 413 | } |
| 414 | |
Mark Brown | 0848c94 | 2012-09-11 15:16:36 +0800 | [diff] [blame] | 415 | error = mfd_add_devices(dev, 0, cells, 2, NULL, 0, NULL); |
Cyril Chemparathy | 03df0f6 | 2011-01-18 19:21:35 +0000 | [diff] [blame] | 416 | if (error < 0) { |
| 417 | dev_err(dev, "cannot add mfd cells\n"); |
| 418 | goto error_enable; |
| 419 | } |
| 420 | |
| 421 | return 0; |
| 422 | |
| 423 | error_enable: |
| 424 | free_irq(ssp->irq, ssp); |
| 425 | error_irq: |
| 426 | clk_put(ssp->clk); |
| 427 | error_clk: |
| 428 | iounmap(ssp->regs); |
| 429 | error_map: |
| 430 | release_mem_region(ssp->res->start, resource_size(ssp->res)); |
| 431 | error_res: |
| 432 | kfree(ssp); |
| 433 | return error; |
| 434 | } |
| 435 | |
Bill Pemberton | 4740f73 | 2012-11-19 13:26:01 -0500 | [diff] [blame^] | 436 | static int ti_ssp_remove(struct platform_device *pdev) |
Cyril Chemparathy | 03df0f6 | 2011-01-18 19:21:35 +0000 | [diff] [blame] | 437 | { |
| 438 | struct device *dev = &pdev->dev; |
| 439 | struct ti_ssp *ssp = dev_get_drvdata(dev); |
| 440 | |
| 441 | mfd_remove_devices(dev); |
| 442 | clk_disable(ssp->clk); |
| 443 | free_irq(ssp->irq, ssp); |
| 444 | clk_put(ssp->clk); |
| 445 | iounmap(ssp->regs); |
| 446 | release_mem_region(ssp->res->start, resource_size(ssp->res)); |
| 447 | kfree(ssp); |
| 448 | dev_set_drvdata(dev, NULL); |
| 449 | return 0; |
| 450 | } |
| 451 | |
| 452 | static struct platform_driver ti_ssp_driver = { |
| 453 | .probe = ti_ssp_probe, |
Bill Pemberton | 8444921 | 2012-11-19 13:20:24 -0500 | [diff] [blame] | 454 | .remove = ti_ssp_remove, |
Cyril Chemparathy | 03df0f6 | 2011-01-18 19:21:35 +0000 | [diff] [blame] | 455 | .driver = { |
| 456 | .name = "ti-ssp", |
| 457 | .owner = THIS_MODULE, |
| 458 | } |
| 459 | }; |
| 460 | |
Mark Brown | 65349d6 | 2011-11-23 22:58:34 +0000 | [diff] [blame] | 461 | module_platform_driver(ti_ssp_driver); |
Cyril Chemparathy | 03df0f6 | 2011-01-18 19:21:35 +0000 | [diff] [blame] | 462 | |
| 463 | MODULE_DESCRIPTION("Sequencer Serial Port (SSP) Driver"); |
| 464 | MODULE_AUTHOR("Cyril Chemparathy"); |
| 465 | MODULE_LICENSE("GPL"); |
| 466 | MODULE_ALIAS("platform:ti-ssp"); |