Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 1 | /* |
| 2 | * linux/drivers/video/mmp/hw/mmp_ctrl.c |
| 3 | * Marvell MMP series Display Controller support |
| 4 | * |
| 5 | * Copyright (C) 2012 Marvell Technology Group Ltd. |
| 6 | * Authors: Guoqing Li <ligq@marvell.com> |
| 7 | * Lisa Du <cldu@marvell.com> |
| 8 | * Zhou Zhu <zzhu3@marvell.com> |
| 9 | * |
| 10 | * This program is free software; you can redistribute it and/or modify it |
| 11 | * under the terms of the GNU General Public License as published by the |
| 12 | * Free Software Foundation; either version 2 of the License, or (at your |
| 13 | * option) any later version. |
| 14 | * |
| 15 | * This program is distributed in the hope that it will be useful, but WITHOUT |
| 16 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 17 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 18 | * more details. |
| 19 | * |
| 20 | * You should have received a copy of the GNU General Public License along with |
| 21 | * this program. If not, see <http://www.gnu.org/licenses/>. |
| 22 | * |
| 23 | */ |
| 24 | #include <linux/module.h> |
| 25 | #include <linux/moduleparam.h> |
| 26 | #include <linux/kernel.h> |
| 27 | #include <linux/errno.h> |
| 28 | #include <linux/string.h> |
| 29 | #include <linux/interrupt.h> |
| 30 | #include <linux/slab.h> |
| 31 | #include <linux/delay.h> |
| 32 | #include <linux/platform_device.h> |
| 33 | #include <linux/dma-mapping.h> |
| 34 | #include <linux/clk.h> |
| 35 | #include <linux/err.h> |
| 36 | #include <linux/vmalloc.h> |
| 37 | #include <linux/uaccess.h> |
| 38 | #include <linux/kthread.h> |
| 39 | #include <linux/io.h> |
| 40 | |
| 41 | #include "mmp_ctrl.h" |
| 42 | |
| 43 | static irqreturn_t ctrl_handle_irq(int irq, void *dev_id) |
| 44 | { |
| 45 | struct mmphw_ctrl *ctrl = (struct mmphw_ctrl *)dev_id; |
| 46 | u32 isr, imask, tmp; |
| 47 | |
| 48 | isr = readl_relaxed(ctrl->reg_base + SPU_IRQ_ISR); |
| 49 | imask = readl_relaxed(ctrl->reg_base + SPU_IRQ_ENA); |
| 50 | |
| 51 | do { |
| 52 | /* clear clock only */ |
| 53 | tmp = readl_relaxed(ctrl->reg_base + SPU_IRQ_ISR); |
| 54 | if (tmp & isr) |
| 55 | writel_relaxed(~isr, ctrl->reg_base + SPU_IRQ_ISR); |
Guoqing Li | 1f2e42c | 2013-09-13 14:59:47 +0800 | [diff] [blame] | 56 | } while ((isr = readl_relaxed(ctrl->reg_base + SPU_IRQ_ISR)) & imask); |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 57 | |
| 58 | return IRQ_HANDLED; |
| 59 | } |
| 60 | |
| 61 | static u32 fmt_to_reg(struct mmp_overlay *overlay, int pix_fmt) |
| 62 | { |
Guoqing Li | 9a27d59 | 2013-09-13 14:59:45 +0800 | [diff] [blame] | 63 | u32 rbswap = 0, uvswap = 0, yuvswap = 0, |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 64 | csc_en = 0, val = 0, |
| 65 | vid = overlay_is_vid(overlay); |
| 66 | |
| 67 | switch (pix_fmt) { |
| 68 | case PIXFMT_RGB565: |
| 69 | case PIXFMT_RGB1555: |
| 70 | case PIXFMT_RGB888PACK: |
| 71 | case PIXFMT_RGB888UNPACK: |
| 72 | case PIXFMT_RGBA888: |
Guoqing Li | 9a27d59 | 2013-09-13 14:59:45 +0800 | [diff] [blame] | 73 | rbswap = 1; |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 74 | break; |
| 75 | case PIXFMT_VYUY: |
| 76 | case PIXFMT_YVU422P: |
| 77 | case PIXFMT_YVU420P: |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 78 | uvswap = 1; |
| 79 | break; |
| 80 | case PIXFMT_YUYV: |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 81 | yuvswap = 1; |
| 82 | break; |
| 83 | default: |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 84 | break; |
| 85 | } |
| 86 | |
| 87 | switch (pix_fmt) { |
| 88 | case PIXFMT_RGB565: |
| 89 | case PIXFMT_BGR565: |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 90 | break; |
| 91 | case PIXFMT_RGB1555: |
| 92 | case PIXFMT_BGR1555: |
| 93 | val = 0x1; |
| 94 | break; |
| 95 | case PIXFMT_RGB888PACK: |
| 96 | case PIXFMT_BGR888PACK: |
| 97 | val = 0x2; |
| 98 | break; |
| 99 | case PIXFMT_RGB888UNPACK: |
| 100 | case PIXFMT_BGR888UNPACK: |
| 101 | val = 0x3; |
| 102 | break; |
| 103 | case PIXFMT_RGBA888: |
| 104 | case PIXFMT_BGRA888: |
| 105 | val = 0x4; |
| 106 | break; |
| 107 | case PIXFMT_UYVY: |
| 108 | case PIXFMT_VYUY: |
| 109 | case PIXFMT_YUYV: |
| 110 | val = 0x5; |
| 111 | csc_en = 1; |
| 112 | break; |
| 113 | case PIXFMT_YUV422P: |
| 114 | case PIXFMT_YVU422P: |
| 115 | val = 0x6; |
| 116 | csc_en = 1; |
| 117 | break; |
| 118 | case PIXFMT_YUV420P: |
| 119 | case PIXFMT_YVU420P: |
| 120 | val = 0x7; |
| 121 | csc_en = 1; |
| 122 | break; |
| 123 | default: |
| 124 | break; |
| 125 | } |
| 126 | |
| 127 | return (dma_palette(0) | dma_fmt(vid, val) | |
| 128 | dma_swaprb(vid, rbswap) | dma_swapuv(vid, uvswap) | |
| 129 | dma_swapyuv(vid, yuvswap) | dma_csc(vid, csc_en)); |
| 130 | } |
| 131 | |
| 132 | static void dmafetch_set_fmt(struct mmp_overlay *overlay) |
| 133 | { |
| 134 | u32 tmp; |
| 135 | struct mmp_path *path = overlay->path; |
| 136 | tmp = readl_relaxed(ctrl_regs(path) + dma_ctrl(0, path->id)); |
| 137 | tmp &= ~dma_mask(overlay_is_vid(overlay)); |
| 138 | tmp |= fmt_to_reg(overlay, overlay->win.pix_fmt); |
| 139 | writel_relaxed(tmp, ctrl_regs(path) + dma_ctrl(0, path->id)); |
| 140 | } |
| 141 | |
| 142 | static void overlay_set_win(struct mmp_overlay *overlay, struct mmp_win *win) |
| 143 | { |
| 144 | struct lcd_regs *regs = path_regs(overlay->path); |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 145 | |
| 146 | /* assert win supported */ |
| 147 | memcpy(&overlay->win, win, sizeof(struct mmp_win)); |
| 148 | |
| 149 | mutex_lock(&overlay->access_ok); |
Jing Xiang | 24586d8 | 2013-09-13 14:59:49 +0800 | [diff] [blame] | 150 | |
| 151 | if (overlay_is_vid(overlay)) { |
| 152 | writel_relaxed(win->pitch[0], ®s->v_pitch_yc); |
| 153 | writel_relaxed(win->pitch[2] << 16 | |
| 154 | win->pitch[1], ®s->v_pitch_uv); |
| 155 | |
| 156 | writel_relaxed((win->ysrc << 16) | win->xsrc, ®s->v_size); |
| 157 | writel_relaxed((win->ydst << 16) | win->xdst, ®s->v_size_z); |
| 158 | writel_relaxed(win->ypos << 16 | win->xpos, ®s->v_start); |
| 159 | } else { |
| 160 | writel_relaxed(win->pitch[0], ®s->g_pitch); |
| 161 | |
| 162 | writel_relaxed((win->ysrc << 16) | win->xsrc, ®s->g_size); |
| 163 | writel_relaxed((win->ydst << 16) | win->xdst, ®s->g_size_z); |
| 164 | writel_relaxed(win->ypos << 16 | win->xpos, ®s->g_start); |
| 165 | } |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 166 | |
| 167 | dmafetch_set_fmt(overlay); |
| 168 | mutex_unlock(&overlay->access_ok); |
| 169 | } |
| 170 | |
| 171 | static void dmafetch_onoff(struct mmp_overlay *overlay, int on) |
| 172 | { |
Jing Xiang | baf9d52 | 2013-06-10 23:52:32 +0800 | [diff] [blame] | 173 | u32 mask = overlay_is_vid(overlay) ? CFG_DMA_ENA_MASK : |
| 174 | CFG_GRA_ENA_MASK; |
| 175 | u32 enable = overlay_is_vid(overlay) ? CFG_DMA_ENA(1) : CFG_GRA_ENA(1); |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 176 | u32 tmp; |
| 177 | struct mmp_path *path = overlay->path; |
| 178 | |
| 179 | mutex_lock(&overlay->access_ok); |
| 180 | tmp = readl_relaxed(ctrl_regs(path) + dma_ctrl(0, path->id)); |
| 181 | tmp &= ~mask; |
| 182 | tmp |= (on ? enable : 0); |
| 183 | writel(tmp, ctrl_regs(path) + dma_ctrl(0, path->id)); |
| 184 | mutex_unlock(&overlay->access_ok); |
| 185 | } |
| 186 | |
| 187 | static void path_enabledisable(struct mmp_path *path, int on) |
| 188 | { |
| 189 | u32 tmp; |
| 190 | mutex_lock(&path->access_ok); |
| 191 | tmp = readl_relaxed(ctrl_regs(path) + LCD_SCLK(path)); |
| 192 | if (on) |
| 193 | tmp &= ~SCLK_DISABLE; |
| 194 | else |
| 195 | tmp |= SCLK_DISABLE; |
| 196 | writel_relaxed(tmp, ctrl_regs(path) + LCD_SCLK(path)); |
| 197 | mutex_unlock(&path->access_ok); |
| 198 | } |
| 199 | |
| 200 | static void path_onoff(struct mmp_path *path, int on) |
| 201 | { |
| 202 | if (path->status == on) { |
| 203 | dev_info(path->dev, "path %s is already %s\n", |
| 204 | path->name, stat_name(path->status)); |
| 205 | return; |
| 206 | } |
| 207 | |
| 208 | if (on) { |
| 209 | path_enabledisable(path, 1); |
| 210 | |
| 211 | if (path->panel && path->panel->set_onoff) |
| 212 | path->panel->set_onoff(path->panel, 1); |
| 213 | } else { |
| 214 | if (path->panel && path->panel->set_onoff) |
| 215 | path->panel->set_onoff(path->panel, 0); |
| 216 | |
| 217 | path_enabledisable(path, 0); |
| 218 | } |
| 219 | path->status = on; |
| 220 | } |
| 221 | |
| 222 | static void overlay_set_onoff(struct mmp_overlay *overlay, int on) |
| 223 | { |
| 224 | if (overlay->status == on) { |
| 225 | dev_info(overlay_to_ctrl(overlay)->dev, "overlay %s is already %s\n", |
| 226 | overlay->path->name, stat_name(overlay->status)); |
| 227 | return; |
| 228 | } |
| 229 | overlay->status = on; |
| 230 | dmafetch_onoff(overlay, on); |
| 231 | if (overlay->path->ops.check_status(overlay->path) |
| 232 | != overlay->path->status) |
| 233 | path_onoff(overlay->path, on); |
| 234 | } |
| 235 | |
| 236 | static void overlay_set_fetch(struct mmp_overlay *overlay, int fetch_id) |
| 237 | { |
| 238 | overlay->dmafetch_id = fetch_id; |
| 239 | } |
| 240 | |
| 241 | static int overlay_set_addr(struct mmp_overlay *overlay, struct mmp_addr *addr) |
| 242 | { |
| 243 | struct lcd_regs *regs = path_regs(overlay->path); |
| 244 | |
| 245 | /* FIXME: assert addr supported */ |
Jing Xiang | 265e78c | 2013-06-10 23:52:42 +0800 | [diff] [blame] | 246 | memcpy(&overlay->addr, addr, sizeof(struct mmp_addr)); |
Jing Xiang | 24586d8 | 2013-09-13 14:59:49 +0800 | [diff] [blame] | 247 | |
| 248 | if (overlay_is_vid(overlay)) { |
| 249 | writel_relaxed(addr->phys[0], ®s->v_y0); |
| 250 | writel_relaxed(addr->phys[1], ®s->v_u0); |
| 251 | writel_relaxed(addr->phys[2], ®s->v_v0); |
| 252 | } else |
| 253 | writel_relaxed(addr->phys[0], ®s->g_0); |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 254 | |
| 255 | return overlay->addr.phys[0]; |
| 256 | } |
| 257 | |
| 258 | static void path_set_mode(struct mmp_path *path, struct mmp_mode *mode) |
| 259 | { |
| 260 | struct lcd_regs *regs = path_regs(path); |
| 261 | u32 total_x, total_y, vsync_ctrl, tmp, sclk_src, sclk_div, |
Guoqing Li | 9a27d59 | 2013-09-13 14:59:45 +0800 | [diff] [blame] | 262 | link_config = path_to_path_plat(path)->link_config, |
| 263 | dsi_rbswap = path_to_path_plat(path)->link_config; |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 264 | |
| 265 | /* FIXME: assert videomode supported */ |
| 266 | memcpy(&path->mode, mode, sizeof(struct mmp_mode)); |
| 267 | |
| 268 | mutex_lock(&path->access_ok); |
| 269 | |
| 270 | /* polarity of timing signals */ |
| 271 | tmp = readl_relaxed(ctrl_regs(path) + intf_ctrl(path->id)) & 0x1; |
| 272 | tmp |= mode->vsync_invert ? 0 : 0x8; |
| 273 | tmp |= mode->hsync_invert ? 0 : 0x4; |
| 274 | tmp |= link_config & CFG_DUMBMODE_MASK; |
| 275 | tmp |= CFG_DUMB_ENA(1); |
| 276 | writel_relaxed(tmp, ctrl_regs(path) + intf_ctrl(path->id)); |
| 277 | |
Guoqing Li | 9a27d59 | 2013-09-13 14:59:45 +0800 | [diff] [blame] | 278 | /* interface rb_swap setting */ |
| 279 | tmp = readl_relaxed(ctrl_regs(path) + intf_rbswap_ctrl(path->id)) & |
| 280 | (~(CFG_INTFRBSWAP_MASK)); |
| 281 | tmp |= dsi_rbswap & CFG_INTFRBSWAP_MASK; |
| 282 | writel_relaxed(tmp, ctrl_regs(path) + intf_rbswap_ctrl(path->id)); |
| 283 | |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 284 | writel_relaxed((mode->yres << 16) | mode->xres, ®s->screen_active); |
| 285 | writel_relaxed((mode->left_margin << 16) | mode->right_margin, |
| 286 | ®s->screen_h_porch); |
| 287 | writel_relaxed((mode->upper_margin << 16) | mode->lower_margin, |
| 288 | ®s->screen_v_porch); |
| 289 | total_x = mode->xres + mode->left_margin + mode->right_margin + |
| 290 | mode->hsync_len; |
| 291 | total_y = mode->yres + mode->upper_margin + mode->lower_margin + |
| 292 | mode->vsync_len; |
| 293 | writel_relaxed((total_y << 16) | total_x, ®s->screen_size); |
| 294 | |
| 295 | /* vsync ctrl */ |
| 296 | if (path->output_type == PATH_OUT_DSI) |
| 297 | vsync_ctrl = 0x01330133; |
| 298 | else |
| 299 | vsync_ctrl = ((mode->xres + mode->right_margin) << 16) |
| 300 | | (mode->xres + mode->right_margin); |
| 301 | writel_relaxed(vsync_ctrl, ®s->vsync_ctrl); |
| 302 | |
| 303 | /* set pixclock div */ |
| 304 | sclk_src = clk_get_rate(path_to_ctrl(path)->clk); |
| 305 | sclk_div = sclk_src / mode->pixclock_freq; |
| 306 | if (sclk_div * mode->pixclock_freq < sclk_src) |
| 307 | sclk_div++; |
| 308 | |
| 309 | dev_info(path->dev, "%s sclk_src %d sclk_div 0x%x pclk %d\n", |
| 310 | __func__, sclk_src, sclk_div, mode->pixclock_freq); |
| 311 | |
| 312 | tmp = readl_relaxed(ctrl_regs(path) + LCD_SCLK(path)); |
| 313 | tmp &= ~CLK_INT_DIV_MASK; |
| 314 | tmp |= sclk_div; |
| 315 | writel_relaxed(tmp, ctrl_regs(path) + LCD_SCLK(path)); |
| 316 | |
| 317 | mutex_unlock(&path->access_ok); |
| 318 | } |
| 319 | |
| 320 | static struct mmp_overlay_ops mmphw_overlay_ops = { |
| 321 | .set_fetch = overlay_set_fetch, |
| 322 | .set_onoff = overlay_set_onoff, |
| 323 | .set_win = overlay_set_win, |
| 324 | .set_addr = overlay_set_addr, |
| 325 | }; |
| 326 | |
| 327 | static void ctrl_set_default(struct mmphw_ctrl *ctrl) |
| 328 | { |
| 329 | u32 tmp, irq_mask; |
| 330 | |
| 331 | /* |
| 332 | * LCD Global control(LCD_TOP_CTRL) should be configed before |
| 333 | * any other LCD registers read/write, or there maybe issues. |
| 334 | */ |
| 335 | tmp = readl_relaxed(ctrl->reg_base + LCD_TOP_CTRL); |
| 336 | tmp |= 0xfff0; |
| 337 | writel_relaxed(tmp, ctrl->reg_base + LCD_TOP_CTRL); |
| 338 | |
| 339 | |
| 340 | /* disable all interrupts */ |
| 341 | irq_mask = path_imasks(0) | err_imask(0) | |
| 342 | path_imasks(1) | err_imask(1); |
| 343 | tmp = readl_relaxed(ctrl->reg_base + SPU_IRQ_ENA); |
| 344 | tmp &= ~irq_mask; |
| 345 | tmp |= irq_mask; |
| 346 | writel_relaxed(tmp, ctrl->reg_base + SPU_IRQ_ENA); |
| 347 | } |
| 348 | |
| 349 | static void path_set_default(struct mmp_path *path) |
| 350 | { |
| 351 | struct lcd_regs *regs = path_regs(path); |
| 352 | u32 dma_ctrl1, mask, tmp, path_config; |
| 353 | |
| 354 | path_config = path_to_path_plat(path)->path_config; |
| 355 | |
| 356 | /* Configure IOPAD: should be parallel only */ |
| 357 | if (PATH_OUT_PARALLEL == path->output_type) { |
| 358 | mask = CFG_IOPADMODE_MASK | CFG_BURST_MASK | CFG_BOUNDARY_MASK; |
| 359 | tmp = readl_relaxed(ctrl_regs(path) + SPU_IOPAD_CONTROL); |
| 360 | tmp &= ~mask; |
| 361 | tmp |= path_config; |
| 362 | writel_relaxed(tmp, ctrl_regs(path) + SPU_IOPAD_CONTROL); |
| 363 | } |
| 364 | |
| 365 | /* Select path clock source */ |
| 366 | tmp = readl_relaxed(ctrl_regs(path) + LCD_SCLK(path)); |
| 367 | tmp &= ~SCLK_SRC_SEL_MASK; |
| 368 | tmp |= path_config; |
| 369 | writel_relaxed(tmp, ctrl_regs(path) + LCD_SCLK(path)); |
| 370 | |
| 371 | /* |
| 372 | * Configure default bits: vsync triggers DMA, |
| 373 | * power save enable, configure alpha registers to |
| 374 | * display 100% graphics, and set pixel command. |
| 375 | */ |
| 376 | dma_ctrl1 = 0x2032ff81; |
| 377 | |
| 378 | dma_ctrl1 |= CFG_VSYNC_INV_MASK; |
| 379 | writel_relaxed(dma_ctrl1, ctrl_regs(path) + dma_ctrl(1, path->id)); |
| 380 | |
| 381 | /* Configure default register values */ |
| 382 | writel_relaxed(0x00000000, ®s->blank_color); |
| 383 | writel_relaxed(0x00000000, ®s->g_1); |
| 384 | writel_relaxed(0x00000000, ®s->g_start); |
| 385 | |
| 386 | /* |
| 387 | * 1.enable multiple burst request in DMA AXI |
| 388 | * bus arbiter for faster read if not tv path; |
| 389 | * 2.enable horizontal smooth filter; |
| 390 | */ |
Guoqing Li | 1f2e42c | 2013-09-13 14:59:47 +0800 | [diff] [blame] | 391 | mask = CFG_GRA_HSMOOTH_MASK | CFG_DMA_HSMOOTH_MASK | CFG_ARBFAST_ENA(1); |
| 392 | tmp = readl_relaxed(ctrl_regs(path) + dma_ctrl(0, path->id)); |
| 393 | tmp |= mask; |
| 394 | if (PATH_TV == path->id) |
| 395 | tmp &= ~CFG_ARBFAST_ENA(1); |
| 396 | writel_relaxed(tmp, ctrl_regs(path) + dma_ctrl(0, path->id)); |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 397 | } |
| 398 | |
| 399 | static int path_init(struct mmphw_path_plat *path_plat, |
| 400 | struct mmp_mach_path_config *config) |
| 401 | { |
| 402 | struct mmphw_ctrl *ctrl = path_plat->ctrl; |
| 403 | struct mmp_path_info *path_info; |
| 404 | struct mmp_path *path = NULL; |
| 405 | |
| 406 | dev_info(ctrl->dev, "%s: %s\n", __func__, config->name); |
| 407 | |
| 408 | /* init driver data */ |
| 409 | path_info = kzalloc(sizeof(struct mmp_path_info), GFP_KERNEL); |
| 410 | if (!path_info) { |
| 411 | dev_err(ctrl->dev, "%s: unable to alloc path_info for %s\n", |
| 412 | __func__, config->name); |
| 413 | return 0; |
| 414 | } |
| 415 | path_info->name = config->name; |
| 416 | path_info->id = path_plat->id; |
| 417 | path_info->dev = ctrl->dev; |
| 418 | path_info->overlay_num = config->overlay_num; |
| 419 | path_info->overlay_ops = &mmphw_overlay_ops; |
| 420 | path_info->set_mode = path_set_mode; |
| 421 | path_info->plat_data = path_plat; |
| 422 | |
| 423 | /* create/register platform device */ |
| 424 | path = mmp_register_path(path_info); |
| 425 | if (!path) { |
| 426 | kfree(path_info); |
| 427 | return 0; |
| 428 | } |
| 429 | path_plat->path = path; |
| 430 | path_plat->path_config = config->path_config; |
| 431 | path_plat->link_config = config->link_config; |
Guoqing Li | 9a27d59 | 2013-09-13 14:59:45 +0800 | [diff] [blame] | 432 | path_plat->dsi_rbswap = config->dsi_rbswap; |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 433 | path_set_default(path); |
| 434 | |
| 435 | kfree(path_info); |
| 436 | return 1; |
| 437 | } |
| 438 | |
| 439 | static void path_deinit(struct mmphw_path_plat *path_plat) |
| 440 | { |
| 441 | if (!path_plat) |
| 442 | return; |
| 443 | |
Markus Elfring | 3163e4cd1 | 2014-11-23 15:45:03 +0100 | [diff] [blame] | 444 | mmp_unregister_path(path_plat->path); |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 445 | } |
| 446 | |
| 447 | static int mmphw_probe(struct platform_device *pdev) |
| 448 | { |
| 449 | struct mmp_mach_plat_info *mi; |
| 450 | struct resource *res; |
| 451 | int ret, i, size, irq; |
| 452 | struct mmphw_path_plat *path_plat; |
| 453 | struct mmphw_ctrl *ctrl = NULL; |
| 454 | |
| 455 | /* get resources from platform data */ |
| 456 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| 457 | if (res == NULL) { |
| 458 | dev_err(&pdev->dev, "%s: no IO memory defined\n", __func__); |
| 459 | ret = -ENOENT; |
| 460 | goto failed; |
| 461 | } |
| 462 | |
| 463 | irq = platform_get_irq(pdev, 0); |
| 464 | if (irq < 0) { |
| 465 | dev_err(&pdev->dev, "%s: no IRQ defined\n", __func__); |
| 466 | ret = -ENOENT; |
| 467 | goto failed; |
| 468 | } |
| 469 | |
| 470 | /* get configs from platform data */ |
| 471 | mi = pdev->dev.platform_data; |
| 472 | if (mi == NULL || !mi->path_num || !mi->paths) { |
| 473 | dev_err(&pdev->dev, "%s: no platform data defined\n", __func__); |
| 474 | ret = -EINVAL; |
| 475 | goto failed; |
| 476 | } |
| 477 | |
| 478 | /* allocate */ |
| 479 | size = sizeof(struct mmphw_ctrl) + sizeof(struct mmphw_path_plat) * |
| 480 | mi->path_num; |
| 481 | ctrl = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); |
| 482 | if (!ctrl) { |
| 483 | ret = -ENOMEM; |
| 484 | goto failed; |
| 485 | } |
| 486 | |
| 487 | ctrl->name = mi->name; |
| 488 | ctrl->path_num = mi->path_num; |
| 489 | ctrl->dev = &pdev->dev; |
| 490 | ctrl->irq = irq; |
| 491 | platform_set_drvdata(pdev, ctrl); |
| 492 | mutex_init(&ctrl->access_ok); |
| 493 | |
| 494 | /* map registers.*/ |
| 495 | if (!devm_request_mem_region(ctrl->dev, res->start, |
| 496 | resource_size(res), ctrl->name)) { |
| 497 | dev_err(ctrl->dev, |
| 498 | "can't request region for resource %pR\n", res); |
| 499 | ret = -EINVAL; |
| 500 | goto failed; |
| 501 | } |
| 502 | |
| 503 | ctrl->reg_base = devm_ioremap_nocache(ctrl->dev, |
| 504 | res->start, resource_size(res)); |
| 505 | if (ctrl->reg_base == NULL) { |
Arnd Bergmann | c3a2da2 | 2016-01-25 16:03:01 +0100 | [diff] [blame] | 506 | dev_err(ctrl->dev, "%s: res %pR map failed\n", __func__, res); |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 507 | ret = -ENOMEM; |
| 508 | goto failed; |
| 509 | } |
| 510 | |
| 511 | /* request irq */ |
| 512 | ret = devm_request_irq(ctrl->dev, ctrl->irq, ctrl_handle_irq, |
| 513 | IRQF_SHARED, "lcd_controller", ctrl); |
| 514 | if (ret < 0) { |
| 515 | dev_err(ctrl->dev, "%s unable to request IRQ %d\n", |
| 516 | __func__, ctrl->irq); |
| 517 | ret = -ENXIO; |
| 518 | goto failed; |
| 519 | } |
| 520 | |
| 521 | /* get clock */ |
| 522 | ctrl->clk = devm_clk_get(ctrl->dev, mi->clk_name); |
| 523 | if (IS_ERR(ctrl->clk)) { |
| 524 | dev_err(ctrl->dev, "unable to get clk %s\n", mi->clk_name); |
| 525 | ret = -ENOENT; |
Uwe Kleine-König | fb8a150 | 2013-09-23 18:13:10 +0200 | [diff] [blame] | 526 | goto failed; |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 527 | } |
| 528 | clk_prepare_enable(ctrl->clk); |
| 529 | |
| 530 | /* init global regs */ |
| 531 | ctrl_set_default(ctrl); |
| 532 | |
| 533 | /* init pathes from machine info and register them */ |
| 534 | for (i = 0; i < ctrl->path_num; i++) { |
| 535 | /* get from config and machine info */ |
| 536 | path_plat = &ctrl->path_plats[i]; |
| 537 | path_plat->id = i; |
| 538 | path_plat->ctrl = ctrl; |
| 539 | |
| 540 | /* path init */ |
| 541 | if (!path_init(path_plat, &mi->paths[i])) { |
| 542 | ret = -EINVAL; |
| 543 | goto failed_path_init; |
| 544 | } |
| 545 | } |
| 546 | |
Zhou Zhu | 641b4b1 | 2013-02-21 16:42:18 -0800 | [diff] [blame] | 547 | #ifdef CONFIG_MMP_DISP_SPI |
| 548 | ret = lcd_spi_register(ctrl); |
| 549 | if (ret < 0) |
| 550 | goto failed_path_init; |
| 551 | #endif |
| 552 | |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 553 | dev_info(ctrl->dev, "device init done\n"); |
| 554 | |
| 555 | return 0; |
| 556 | |
| 557 | failed_path_init: |
| 558 | for (i = 0; i < ctrl->path_num; i++) { |
| 559 | path_plat = &ctrl->path_plats[i]; |
| 560 | path_deinit(path_plat); |
| 561 | } |
| 562 | |
Uwe Kleine-König | fb8a150 | 2013-09-23 18:13:10 +0200 | [diff] [blame] | 563 | clk_disable_unprepare(ctrl->clk); |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 564 | failed: |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 565 | dev_err(&pdev->dev, "device init failed\n"); |
| 566 | |
| 567 | return ret; |
| 568 | } |
| 569 | |
| 570 | static struct platform_driver mmphw_driver = { |
| 571 | .driver = { |
| 572 | .name = "mmp-disp", |
Guoqing Li | d63028c | 2013-02-21 16:42:15 -0800 | [diff] [blame] | 573 | }, |
| 574 | .probe = mmphw_probe, |
| 575 | }; |
| 576 | |
| 577 | static int mmphw_init(void) |
| 578 | { |
| 579 | return platform_driver_register(&mmphw_driver); |
| 580 | } |
| 581 | module_init(mmphw_init); |
| 582 | |
| 583 | MODULE_AUTHOR("Li Guoqing<ligq@marvell.com>"); |
| 584 | MODULE_DESCRIPTION("Framebuffer driver for mmp"); |
| 585 | MODULE_LICENSE("GPL"); |