Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-5.4 / 6887a4131da3adaab011613776d865f4bcfb5678 / . / arch / arm / boot / dts / imx28.dtsi
blob: 4634cb861a597d115b5f6dab784da3a616c81b01 [file] [log] [blame]
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]1/*
2 * Copyright 2012 Freescale Semiconductor, Inc.
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12/include/ "skeleton.dtsi"
13
14/ {
15 interrupt-parent = <&icoll>;
16
Shawn Guoce4c6f92012-05-04 14:32:35 +0800[diff] [blame]17 aliases {
18 gpio0 = &gpio0;
19 gpio1 = &gpio1;
20 gpio2 = &gpio2;
21 gpio3 = &gpio3;
22 gpio4 = &gpio4;
Shawn Guo530f1d42012-05-10 15:03:16 +0800[diff] [blame]23 saif0 = &saif0;
24 saif1 = &saif1;
Shawn Guoce4c6f92012-05-04 14:32:35 +0800[diff] [blame]25 };
26
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]27 cpus {
28 cpu@0 {
29 compatible = "arm,arm926ejs";
30 };
31 };
32
33 apb@80000000 {
34 compatible = "simple-bus";
35 #address-cells = <1>;
36 #size-cells = <1>;
37 reg = <0x80000000 0x80000>;
38 ranges;
39
40 apbh@80000000 {
41 compatible = "simple-bus";
42 #address-cells = <1>;
43 #size-cells = <1>;
44 reg = <0x80000000 0x3c900>;
45 ranges;
46
47 icoll: interrupt-controller@80000000 {
48 compatible = "fsl,imx28-icoll", "fsl,mxs-icoll";
49 interrupt-controller;
50 #interrupt-cells = <1>;
51 reg = <0x80000000 0x2000>;
52 };
53
54 hsadc@80002000 {
55 reg = <0x80002000 2000>;
56 interrupts = <13 87>;
57 status = "disabled";
58 };
59
60 dma-apbh@80004000 {
Dong Aisheng84f35702012-05-04 20:12:19 +0800[diff] [blame]61 compatible = "fsl,imx28-dma-apbh";
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]62 reg = <0x80004000 2000>;
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]63 };
64
65 perfmon@80006000 {
66 reg = <0x80006000 800>;
67 interrupts = <27>;
68 status = "disabled";
69 };
70
71 bch@8000a000 {
72 reg = <0x8000a000 2000>;
73 interrupts = <41>;
74 status = "disabled";
75 };
76
77 gpmi@8000c000 {
78 reg = <0x8000c000 2000>;
79 interrupts = <42 88>;
80 status = "disabled";
81 };
82
83 ssp0: ssp@80010000 {
84 reg = <0x80010000 2000>;
85 interrupts = <96 82>;
Shawn Guo35d23042012-05-06 16:33:34 +0800[diff] [blame]86 fsl,ssp-dma-channel = <0>;
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]87 status = "disabled";
88 };
89
90 ssp1: ssp@80012000 {
91 reg = <0x80012000 2000>;
92 interrupts = <97 83>;
Shawn Guo35d23042012-05-06 16:33:34 +0800[diff] [blame]93 fsl,ssp-dma-channel = <1>;
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]94 status = "disabled";
95 };
96
97 ssp2: ssp@80014000 {
98 reg = <0x80014000 2000>;
99 interrupts = <98 84>;
Shawn Guo35d23042012-05-06 16:33:34 +0800[diff] [blame]100 fsl,ssp-dma-channel = <2>;
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]101 status = "disabled";
102 };
103
104 ssp3: ssp@80016000 {
105 reg = <0x80016000 2000>;
106 interrupts = <99 85>;
Shawn Guo35d23042012-05-06 16:33:34 +0800[diff] [blame]107 fsl,ssp-dma-channel = <3>;
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]108 status = "disabled";
109 };
110
111 pinctrl@80018000 {
112 #address-cells = <1>;
113 #size-cells = <0>;
Shawn Guoce4c6f92012-05-04 14:32:35 +0800[diff] [blame]114 compatible = "fsl,imx28-pinctrl", "simple-bus";
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]115 reg = <0x80018000 2000>;
116
Shawn Guoce4c6f92012-05-04 14:32:35 +0800[diff] [blame]117 gpio0: gpio@0 {
118 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
119 interrupts = <127>;
120 gpio-controller;
121 #gpio-cells = <2>;
122 interrupt-controller;
123 #interrupt-cells = <2>;
124 };
125
126 gpio1: gpio@1 {
127 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
128 interrupts = <126>;
129 gpio-controller;
130 #gpio-cells = <2>;
131 interrupt-controller;
132 #interrupt-cells = <2>;
133 };
134
135 gpio2: gpio@2 {
136 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
137 interrupts = <125>;
138 gpio-controller;
139 #gpio-cells = <2>;
140 interrupt-controller;
141 #interrupt-cells = <2>;
142 };
143
144 gpio3: gpio@3 {
145 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
146 interrupts = <124>;
147 gpio-controller;
148 #gpio-cells = <2>;
149 interrupt-controller;
150 #interrupt-cells = <2>;
151 };
152
153 gpio4: gpio@4 {
154 compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
155 interrupts = <123>;
156 gpio-controller;
157 #gpio-cells = <2>;
158 interrupt-controller;
159 #interrupt-cells = <2>;
160 };
161
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]162 duart_pins_a: duart@0 {
163 reg = <0>;
164 fsl,pinmux-ids = <0x3102 0x3112>;
165 fsl,drive-strength = <0>;
166 fsl,voltage = <1>;
167 fsl,pull-up = <0>;
168 };
169
170 mac0_pins_a: mac0@0 {
171 reg = <0>;
172 fsl,pinmux-ids = <0x4000 0x4010 0x4020
173 0x4030 0x4040 0x4060 0x4070
174 0x4080 0x4100>;
175 fsl,drive-strength = <1>;
176 fsl,voltage = <1>;
177 fsl,pull-up = <1>;
178 };
179
180 mac1_pins_a: mac1@0 {
181 reg = <0>;
182 fsl,pinmux-ids = <0x40f1 0x4091 0x40a1
183 0x40e1 0x40b1 0x40c1>;
184 fsl,drive-strength = <1>;
185 fsl,voltage = <1>;
186 fsl,pull-up = <1>;
187 };
Shawn Guo35d23042012-05-06 16:33:34 +0800[diff] [blame]188
189 mmc0_8bit_pins_a: mmc0-8bit@0 {
190 reg = <0>;
191 fsl,pinmux-ids = <0x2000 0x2010 0x2020
192 0x2030 0x2040 0x2050 0x2060
193 0x2070 0x2080 0x2090 0x20a0>;
194 fsl,drive-strength = <1>;
195 fsl,voltage = <1>;
196 fsl,pull-up = <1>;
197 };
198
199 mmc0_cd_cfg: mmc0-cd-cfg {
200 fsl,pinmux-ids = <0x2090>;
201 fsl,pull-up = <0>;
202 };
203
204 mmc0_sck_cfg: mmc0-sck-cfg {
205 fsl,pinmux-ids = <0x20a0>;
206 fsl,drive-strength = <2>;
207 fsl,pull-up = <0>;
208 };
Shawn Guo2a96e392012-05-10 15:02:10 +0800[diff] [blame]209
210 i2c0_pins_a: i2c0@0 {
211 reg = <0>;
212 fsl,pinmux-ids = <0x3180 0x3190>;
213 fsl,drive-strength = <1>;
214 fsl,voltage = <1>;
215 fsl,pull-up = <1>;
216 };
Shawn Guo530f1d42012-05-10 15:03:16 +0800[diff] [blame]217
218 saif0_pins_a: saif0@0 {
219 reg = <0>;
220 fsl,pinmux-ids =
221 <0x3140 0x3150 0x3160 0x3170>;
222 fsl,drive-strength = <2>;
223 fsl,voltage = <1>;
224 fsl,pull-up = <1>;
225 };
226
227 saif1_pins_a: saif1@0 {
228 reg = <0>;
229 fsl,pinmux-ids = <0x31a0>;
230 fsl,drive-strength = <2>;
231 fsl,voltage = <1>;
232 fsl,pull-up = <1>;
233 };
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]234 };
235
236 digctl@8001c000 {
237 reg = <0x8001c000 2000>;
238 interrupts = <89>;
239 status = "disabled";
240 };
241
242 etm@80022000 {
243 reg = <0x80022000 2000>;
244 status = "disabled";
245 };
246
247 dma-apbx@80024000 {
Dong Aisheng84f35702012-05-04 20:12:19 +0800[diff] [blame]248 compatible = "fsl,imx28-dma-apbx";
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]249 reg = <0x80024000 2000>;
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]250 };
251
252 dcp@80028000 {
253 reg = <0x80028000 2000>;
254 interrupts = <52 53 54>;
255 status = "disabled";
256 };
257
258 pxp@8002a000 {
259 reg = <0x8002a000 2000>;
260 interrupts = <39>;
261 status = "disabled";
262 };
263
264 ocotp@8002c000 {
265 reg = <0x8002c000 2000>;
266 status = "disabled";
267 };
268
269 axi-ahb@8002e000 {
270 reg = <0x8002e000 2000>;
271 status = "disabled";
272 };
273
274 lcdif@80030000 {
275 reg = <0x80030000 2000>;
276 interrupts = <38 86>;
277 status = "disabled";
278 };
279
280 can0: can@80032000 {
281 reg = <0x80032000 2000>;
282 interrupts = <8>;
283 status = "disabled";
284 };
285
286 can1: can@80034000 {
287 reg = <0x80034000 2000>;
288 interrupts = <9>;
289 status = "disabled";
290 };
291
292 simdbg@8003c000 {
293 reg = <0x8003c000 200>;
294 status = "disabled";
295 };
296
297 simgpmisel@8003c200 {
298 reg = <0x8003c200 100>;
299 status = "disabled";
300 };
301
302 simsspsel@8003c300 {
303 reg = <0x8003c300 100>;
304 status = "disabled";
305 };
306
307 simmemsel@8003c400 {
308 reg = <0x8003c400 100>;
309 status = "disabled";
310 };
311
312 gpiomon@8003c500 {
313 reg = <0x8003c500 100>;
314 status = "disabled";
315 };
316
317 simenet@8003c700 {
318 reg = <0x8003c700 100>;
319 status = "disabled";
320 };
321
322 armjtag@8003c800 {
323 reg = <0x8003c800 100>;
324 status = "disabled";
325 };
326 };
327
328 apbx@80040000 {
329 compatible = "simple-bus";
330 #address-cells = <1>;
331 #size-cells = <1>;
332 reg = <0x80040000 0x40000>;
333 ranges;
334
335 clkctl@80040000 {
336 reg = <0x80040000 2000>;
337 status = "disabled";
338 };
339
340 saif0: saif@80042000 {
Shawn Guo530f1d42012-05-10 15:03:16 +0800[diff] [blame]341 compatible = "fsl,imx28-saif";
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]342 reg = <0x80042000 2000>;
343 interrupts = <59 80>;
Shawn Guo530f1d42012-05-10 15:03:16 +0800[diff] [blame]344 fsl,saif-dma-channel = <4>;
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]345 status = "disabled";
346 };
347
348 power@80044000 {
349 reg = <0x80044000 2000>;
350 status = "disabled";
351 };
352
353 saif1: saif@80046000 {
Shawn Guo530f1d42012-05-10 15:03:16 +0800[diff] [blame]354 compatible = "fsl,imx28-saif";
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]355 reg = <0x80046000 2000>;
356 interrupts = <58 81>;
Shawn Guo530f1d42012-05-10 15:03:16 +0800[diff] [blame]357 fsl,saif-dma-channel = <5>;
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]358 status = "disabled";
359 };
360
361 lradc@80050000 {
362 reg = <0x80050000 2000>;
363 status = "disabled";
364 };
365
366 spdif@80054000 {
367 reg = <0x80054000 2000>;
368 interrupts = <45 66>;
369 status = "disabled";
370 };
371
372 rtc@80056000 {
373 reg = <0x80056000 2000>;
374 interrupts = <28 29>;
375 status = "disabled";
376 };
377
378 i2c0: i2c@80058000 {
Shawn Guo2a96e392012-05-10 15:02:10 +0800[diff] [blame]379 #address-cells = <1>;
380 #size-cells = <0>;
381 compatible = "fsl,imx28-i2c";
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]382 reg = <0x80058000 2000>;
383 interrupts = <111 68>;
384 status = "disabled";
385 };
386
387 i2c1: i2c@8005a000 {
Shawn Guo2a96e392012-05-10 15:02:10 +0800[diff] [blame]388 #address-cells = <1>;
389 #size-cells = <0>;
390 compatible = "fsl,imx28-i2c";
Dong Aishengbc3a59c2012-03-31 21:26:57 +0800[diff] [blame]391 reg = <0x8005a000 2000>;
392 interrupts = <110 69>;
393 status = "disabled";
394 };
395
396 pwm@80064000 {
397 reg = <0x80064000 2000>;
398 status = "disabled";
399 };
400
401 timrot@80068000 {
402 reg = <0x80068000 2000>;
403 status = "disabled";
404 };
405
406 auart0: serial@8006a000 {
407 reg = <0x8006a000 0x2000>;
408 interrupts = <112 70 71>;
409 status = "disabled";
410 };
411
412 auart1: serial@8006c000 {
413 reg = <0x8006c000 0x2000>;
414 interrupts = <113 72 73>;
415 status = "disabled";
416 };
417
418 auart2: serial@8006e000 {
419 reg = <0x8006e000 0x2000>;
420 interrupts = <114 74 75>;
421 status = "disabled";
422 };
423
424 auart3: serial@80070000 {
425 reg = <0x80070000 0x2000>;
426 interrupts = <115 76 77>;
427 status = "disabled";
428 };
429
430 auart4: serial@80072000 {
431 reg = <0x80072000 0x2000>;
432 interrupts = <116 78 79>;
433 status = "disabled";
434 };
435
436 duart: serial@80074000 {
437 compatible = "arm,pl011", "arm,primecell";
438 reg = <0x80074000 0x1000>;
439 interrupts = <47>;
440 status = "disabled";
441 };
442
443 usbphy0: usbphy@8007c000 {
444 reg = <0x8007c000 0x2000>;
445 status = "disabled";
446 };
447
448 usbphy1: usbphy@8007e000 {
449 reg = <0x8007e000 0x2000>;
450 status = "disabled";
451 };
452 };
453 };
454
455 ahb@80080000 {
456 compatible = "simple-bus";
457 #address-cells = <1>;
458 #size-cells = <1>;
459 reg = <0x80080000 0x80000>;
460 ranges;
461
462 usbctrl0: usbctrl@80080000 {
463 reg = <0x80080000 0x10000>;
464 status = "disabled";
465 };
466
467 usbctrl1: usbctrl@80090000 {
468 reg = <0x80090000 0x10000>;
469 status = "disabled";
470 };
471
472 dflpt@800c0000 {
473 reg = <0x800c0000 0x10000>;
474 status = "disabled";
475 };
476
477 mac0: ethernet@800f0000 {
478 compatible = "fsl,imx28-fec";
479 reg = <0x800f0000 0x4000>;
480 interrupts = <101>;
481 status = "disabled";
482 };
483
484 mac1: ethernet@800f4000 {
485 compatible = "fsl,imx28-fec";
486 reg = <0x800f4000 0x4000>;
487 interrupts = <102>;
488 status = "disabled";
489 };
490
491 switch@800f8000 {
492 reg = <0x800f8000 0x8000>;
493 status = "disabled";
494 };
495
496 };
497};