blob: a0630c32a05c0ae2eae086da5e9f8ce9f99b8e06 [file] [log] [blame]
Viresh KUMARc63b3cb2010-05-26 14:42:10 -07001/*
2 * drivers/mmc/host/sdhci-spear.c
3 *
4 * Support of SDHCI platform devices for spear soc family
5 *
6 * Copyright (C) 2010 ST Microelectronics
7 * Viresh Kumar<viresh.kumar@st.com>
8 *
9 * Inspired by sdhci-pltfm.c
10 *
11 * This file is licensed under the terms of the GNU General Public
12 * License version 2. This program is licensed "as is" without any
13 * warranty of any kind, whether express or implied.
14 */
15
16#include <linux/clk.h>
17#include <linux/delay.h>
18#include <linux/gpio.h>
19#include <linux/highmem.h>
20#include <linux/interrupt.h>
21#include <linux/irq.h>
22#include <linux/platform_device.h>
23#include <linux/slab.h>
24#include <linux/mmc/host.h>
25#include <linux/mmc/sdhci-spear.h>
26#include <linux/io.h>
27#include "sdhci.h"
28
29struct spear_sdhci {
30 struct clk *clk;
31 struct sdhci_plat_data *data;
32};
33
34/* sdhci ops */
35static struct sdhci_ops sdhci_pltfm_ops = {
36 /* Nothing to do for now. */
37};
38
39/* gpio card detection interrupt handler */
40static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id)
41{
42 struct platform_device *pdev = dev_id;
43 struct sdhci_host *host = platform_get_drvdata(pdev);
44 struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
45 unsigned long gpio_irq_type;
46 int val;
47
48 val = gpio_get_value(sdhci->data->card_int_gpio);
49
50 /* val == 1 -> card removed, val == 0 -> card inserted */
51 /* if card removed - set irq for low level, else vice versa */
52 gpio_irq_type = val ? IRQF_TRIGGER_LOW : IRQF_TRIGGER_HIGH;
Thomas Gleixnerdced35a2011-03-28 17:49:12 +020053 irq_set_irq_type(irq, gpio_irq_type);
Viresh KUMARc63b3cb2010-05-26 14:42:10 -070054
55 if (sdhci->data->card_power_gpio >= 0) {
56 if (!sdhci->data->power_always_enb) {
57 /* if card inserted, give power, otherwise remove it */
58 val = sdhci->data->power_active_high ? !val : val ;
59 gpio_set_value(sdhci->data->card_power_gpio, val);
60 }
61 }
62
63 /* inform sdhci driver about card insertion/removal */
64 tasklet_schedule(&host->card_tasklet);
65
66 return IRQ_HANDLED;
67}
68
69static int __devinit sdhci_probe(struct platform_device *pdev)
70{
71 struct sdhci_host *host;
72 struct resource *iomem;
73 struct spear_sdhci *sdhci;
74 int ret;
75
76 BUG_ON(pdev == NULL);
77
78 iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
79 if (!iomem) {
80 ret = -ENOMEM;
81 dev_dbg(&pdev->dev, "memory resource not defined\n");
82 goto err;
83 }
84
85 if (!request_mem_region(iomem->start, resource_size(iomem),
86 "spear-sdhci")) {
87 ret = -EBUSY;
88 dev_dbg(&pdev->dev, "cannot request region\n");
89 goto err;
90 }
91
92 sdhci = kzalloc(sizeof(*sdhci), GFP_KERNEL);
93 if (!sdhci) {
94 ret = -ENOMEM;
95 dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n");
96 goto err_kzalloc;
97 }
98
99 /* clk enable */
100 sdhci->clk = clk_get(&pdev->dev, NULL);
101 if (IS_ERR(sdhci->clk)) {
102 ret = PTR_ERR(sdhci->clk);
103 dev_dbg(&pdev->dev, "Error getting clock\n");
104 goto err_clk_get;
105 }
106
107 ret = clk_enable(sdhci->clk);
108 if (ret) {
109 dev_dbg(&pdev->dev, "Error enabling clock\n");
110 goto err_clk_enb;
111 }
112
113 /* overwrite platform_data */
114 sdhci->data = dev_get_platdata(&pdev->dev);
115 pdev->dev.platform_data = sdhci;
116
117 if (pdev->dev.parent)
118 host = sdhci_alloc_host(pdev->dev.parent, 0);
119 else
120 host = sdhci_alloc_host(&pdev->dev, 0);
121
122 if (IS_ERR(host)) {
123 ret = PTR_ERR(host);
124 dev_dbg(&pdev->dev, "error allocating host\n");
125 goto err_alloc_host;
126 }
127
128 host->hw_name = "sdhci";
129 host->ops = &sdhci_pltfm_ops;
130 host->irq = platform_get_irq(pdev, 0);
131 host->quirks = SDHCI_QUIRK_BROKEN_ADMA;
132
133 host->ioaddr = ioremap(iomem->start, resource_size(iomem));
134 if (!host->ioaddr) {
135 ret = -ENOMEM;
136 dev_dbg(&pdev->dev, "failed to remap registers\n");
137 goto err_ioremap;
138 }
139
140 ret = sdhci_add_host(host);
141 if (ret) {
142 dev_dbg(&pdev->dev, "error adding host\n");
143 goto err_add_host;
144 }
145
146 platform_set_drvdata(pdev, host);
147
148 /*
149 * It is optional to use GPIOs for sdhci Power control & sdhci card
150 * interrupt detection. If sdhci->data is NULL, then use original sdhci
151 * lines otherwise GPIO lines.
152 * If GPIO is selected for power control, then power should be disabled
153 * after card removal and should be enabled when card insertion
154 * interrupt occurs
155 */
156 if (!sdhci->data)
157 return 0;
158
159 if (sdhci->data->card_power_gpio >= 0) {
160 int val = 0;
161
162 ret = gpio_request(sdhci->data->card_power_gpio, "sdhci");
163 if (ret < 0) {
164 dev_dbg(&pdev->dev, "gpio request fail: %d\n",
165 sdhci->data->card_power_gpio);
166 goto err_pgpio_request;
167 }
168
169 if (sdhci->data->power_always_enb)
170 val = sdhci->data->power_active_high;
171 else
172 val = !sdhci->data->power_active_high;
173
174 ret = gpio_direction_output(sdhci->data->card_power_gpio, val);
175 if (ret) {
176 dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
177 sdhci->data->card_power_gpio);
178 goto err_pgpio_direction;
179 }
Viresh KUMARc63b3cb2010-05-26 14:42:10 -0700180 }
181
182 if (sdhci->data->card_int_gpio >= 0) {
183 ret = gpio_request(sdhci->data->card_int_gpio, "sdhci");
184 if (ret < 0) {
185 dev_dbg(&pdev->dev, "gpio request fail: %d\n",
186 sdhci->data->card_int_gpio);
187 goto err_igpio_request;
188 }
189
190 ret = gpio_direction_input(sdhci->data->card_int_gpio);
191 if (ret) {
192 dev_dbg(&pdev->dev, "gpio set direction fail: %d\n",
193 sdhci->data->card_int_gpio);
194 goto err_igpio_direction;
195 }
196 ret = request_irq(gpio_to_irq(sdhci->data->card_int_gpio),
197 sdhci_gpio_irq, IRQF_TRIGGER_LOW,
198 mmc_hostname(host->mmc), pdev);
199 if (ret) {
200 dev_dbg(&pdev->dev, "gpio request irq fail: %d\n",
201 sdhci->data->card_int_gpio);
202 goto err_igpio_request_irq;
203 }
204
205 }
206
207 return 0;
208
209err_igpio_request_irq:
210err_igpio_direction:
211 if (sdhci->data->card_int_gpio >= 0)
212 gpio_free(sdhci->data->card_int_gpio);
213err_igpio_request:
214err_pgpio_direction:
215 if (sdhci->data->card_power_gpio >= 0)
216 gpio_free(sdhci->data->card_power_gpio);
217err_pgpio_request:
218 platform_set_drvdata(pdev, NULL);
219 sdhci_remove_host(host, 1);
220err_add_host:
221 iounmap(host->ioaddr);
222err_ioremap:
223 sdhci_free_host(host);
224err_alloc_host:
225 clk_disable(sdhci->clk);
226err_clk_enb:
227 clk_put(sdhci->clk);
228err_clk_get:
229 kfree(sdhci);
230err_kzalloc:
231 release_mem_region(iomem->start, resource_size(iomem));
232err:
233 dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret);
234 return ret;
235}
236
237static int __devexit sdhci_remove(struct platform_device *pdev)
238{
239 struct sdhci_host *host = platform_get_drvdata(pdev);
240 struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
241 struct spear_sdhci *sdhci = dev_get_platdata(&pdev->dev);
242 int dead;
243 u32 scratch;
244
245 if (sdhci->data) {
246 if (sdhci->data->card_int_gpio >= 0) {
247 free_irq(gpio_to_irq(sdhci->data->card_int_gpio), pdev);
248 gpio_free(sdhci->data->card_int_gpio);
249 }
250
251 if (sdhci->data->card_power_gpio >= 0)
252 gpio_free(sdhci->data->card_power_gpio);
253 }
254
255 platform_set_drvdata(pdev, NULL);
256 dead = 0;
257 scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
258 if (scratch == (u32)-1)
259 dead = 1;
260
261 sdhci_remove_host(host, dead);
262 iounmap(host->ioaddr);
263 sdhci_free_host(host);
264 clk_disable(sdhci->clk);
265 clk_put(sdhci->clk);
266 kfree(sdhci);
267 if (iomem)
268 release_mem_region(iomem->start, resource_size(iomem));
269
270 return 0;
271}
272
273static struct platform_driver sdhci_driver = {
274 .driver = {
275 .name = "sdhci",
276 .owner = THIS_MODULE,
277 },
278 .probe = sdhci_probe,
279 .remove = __devexit_p(sdhci_remove),
280};
281
282static int __init sdhci_init(void)
283{
284 return platform_driver_register(&sdhci_driver);
285}
286module_init(sdhci_init);
287
288static void __exit sdhci_exit(void)
289{
290 platform_driver_unregister(&sdhci_driver);
291}
292module_exit(sdhci_exit);
293
294MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
295MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
296MODULE_LICENSE("GPL v2");