blob: c49061c5168894ebc2c5b6540f8337a18bf08bf2 [file] [log] [blame]
Jiri Slabyfa1c1142007-08-12 17:33:16 +02001/*-
2 * Copyright (c) 2002-2005 Sam Leffler, Errno Consulting
3 * Copyright (c) 2004-2005 Atheros Communications, Inc.
4 * Copyright (c) 2006 Devicescape Software, Inc.
5 * Copyright (c) 2007 Jiri Slaby <jirislaby@gmail.com>
6 * Copyright (c) 2007 Luis R. Rodriguez <mcgrof@winlab.rutgers.edu>
7 *
8 * All rights reserved.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer,
15 * without modification.
16 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
17 * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
18 * redistribution must be conditioned upon including a substantially
19 * similar Disclaimer requirement for further binary redistribution.
20 * 3. Neither the names of the above-listed copyright holders nor the names
21 * of any contributors may be used to endorse or promote products derived
22 * from this software without specific prior written permission.
23 *
24 * Alternatively, this software may be distributed under the terms of the
25 * GNU General Public License ("GPL") version 2 as published by the Free
26 * Software Foundation.
27 *
28 * NO WARRANTY
29 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
30 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
31 * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
32 * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
33 * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
34 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
35 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
36 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
37 * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
38 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
39 * THE POSSIBILITY OF SUCH DAMAGES.
40 *
41 */
42
43#include <linux/version.h>
44#include <linux/module.h>
45#include <linux/delay.h>
46#include <linux/if.h>
47#include <linux/netdevice.h>
48#include <linux/cache.h>
49#include <linux/pci.h>
50#include <linux/ethtool.h>
51#include <linux/uaccess.h>
52
53#include <net/ieee80211_radiotap.h>
54
55#include <asm/unaligned.h>
56
57#include "base.h"
58#include "reg.h"
59#include "debug.h"
60
61/* unaligned little endian access */
62#define LE_READ_2(_p) (le16_to_cpu(get_unaligned((__le16 *)(_p))))
63#define LE_READ_4(_p) (le32_to_cpu(get_unaligned((__le32 *)(_p))))
64
65enum {
66 ATH_LED_TX,
67 ATH_LED_RX,
68};
69
70static int ath5k_calinterval = 10; /* Calibrate PHY every 10 secs (TODO: Fixme) */
71
72
73/******************\
74* Internal defines *
75\******************/
76
77/* Module info */
78MODULE_AUTHOR("Jiri Slaby");
79MODULE_AUTHOR("Nick Kossifidis");
80MODULE_DESCRIPTION("Support for 5xxx series of Atheros 802.11 wireless LAN cards.");
81MODULE_SUPPORTED_DEVICE("Atheros 5xxx WLAN cards");
82MODULE_LICENSE("Dual BSD/GPL");
83MODULE_VERSION("0.1.1 (EXPERIMENTAL)");
84
85
86/* Known PCI ids */
87static struct pci_device_id ath5k_pci_id_table[] __devinitdata = {
88 { PCI_VDEVICE(ATHEROS, 0x0207), .driver_data = AR5K_AR5210 }, /* 5210 early */
89 { PCI_VDEVICE(ATHEROS, 0x0007), .driver_data = AR5K_AR5210 }, /* 5210 */
90 { PCI_VDEVICE(ATHEROS, 0x0011), .driver_data = AR5K_AR5211 }, /* 5311 - this is on AHB bus !*/
91 { PCI_VDEVICE(ATHEROS, 0x0012), .driver_data = AR5K_AR5211 }, /* 5211 */
92 { PCI_VDEVICE(ATHEROS, 0x0013), .driver_data = AR5K_AR5212 }, /* 5212 */
93 { PCI_VDEVICE(3COM_2, 0x0013), .driver_data = AR5K_AR5212 }, /* 3com 5212 */
94 { PCI_VDEVICE(3COM, 0x0013), .driver_data = AR5K_AR5212 }, /* 3com 3CRDAG675 5212 */
95 { PCI_VDEVICE(ATHEROS, 0x1014), .driver_data = AR5K_AR5212 }, /* IBM minipci 5212 */
96 { PCI_VDEVICE(ATHEROS, 0x0014), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
97 { PCI_VDEVICE(ATHEROS, 0x0015), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
98 { PCI_VDEVICE(ATHEROS, 0x0016), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
99 { PCI_VDEVICE(ATHEROS, 0x0017), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
100 { PCI_VDEVICE(ATHEROS, 0x0018), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
101 { PCI_VDEVICE(ATHEROS, 0x0019), .driver_data = AR5K_AR5212 }, /* 5212 combatible */
102 { PCI_VDEVICE(ATHEROS, 0x001a), .driver_data = AR5K_AR5212 }, /* 2413 Griffin-lite */
103 { PCI_VDEVICE(ATHEROS, 0x001b), .driver_data = AR5K_AR5212 }, /* 5413 Eagle */
104 { PCI_VDEVICE(ATHEROS, 0x001c), .driver_data = AR5K_AR5212 }, /* 5424 Condor (PCI-E)*/
105 { PCI_VDEVICE(ATHEROS, 0x0023), .driver_data = AR5K_AR5212 }, /* 5416 */
106 { PCI_VDEVICE(ATHEROS, 0x0024), .driver_data = AR5K_AR5212 }, /* 5418 */
107 { 0 }
108};
109MODULE_DEVICE_TABLE(pci, ath5k_pci_id_table);
110
111/* Known SREVs */
112static struct ath5k_srev_name srev_names[] = {
113 { "5210", AR5K_VERSION_VER, AR5K_SREV_VER_AR5210 },
114 { "5311", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311 },
115 { "5311A", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311A },
116 { "5311B", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311B },
117 { "5211", AR5K_VERSION_VER, AR5K_SREV_VER_AR5211 },
118 { "5212", AR5K_VERSION_VER, AR5K_SREV_VER_AR5212 },
119 { "5213", AR5K_VERSION_VER, AR5K_SREV_VER_AR5213 },
120 { "5213A", AR5K_VERSION_VER, AR5K_SREV_VER_AR5213A },
121 { "2424", AR5K_VERSION_VER, AR5K_SREV_VER_AR2424 },
122 { "5424", AR5K_VERSION_VER, AR5K_SREV_VER_AR5424 },
123 { "5413", AR5K_VERSION_VER, AR5K_SREV_VER_AR5413 },
124 { "5414", AR5K_VERSION_VER, AR5K_SREV_VER_AR5414 },
125 { "5416", AR5K_VERSION_VER, AR5K_SREV_VER_AR5416 },
126 { "5418", AR5K_VERSION_VER, AR5K_SREV_VER_AR5418 },
127 { "xxxxx", AR5K_VERSION_VER, AR5K_SREV_UNKNOWN },
128 { "5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110 },
129 { "5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111 },
130 { "2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111 },
131 { "5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112 },
132 { "5112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A },
133 { "2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112 },
134 { "2112A", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A },
135 { "SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC1 },
136 { "SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC2 },
137 { "5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133 },
138 { "xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN },
139};
140
141/*
142 * Prototypes - PCI stack related functions
143 */
144static int __devinit ath5k_pci_probe(struct pci_dev *pdev,
145 const struct pci_device_id *id);
146static void __devexit ath5k_pci_remove(struct pci_dev *pdev);
147#ifdef CONFIG_PM
148static int ath5k_pci_suspend(struct pci_dev *pdev,
149 pm_message_t state);
150static int ath5k_pci_resume(struct pci_dev *pdev);
151#else
152#define ath5k_pci_suspend NULL
153#define ath5k_pci_resume NULL
154#endif /* CONFIG_PM */
155
156static struct pci_driver ath5k_pci_drv_id = {
157 .name = "ath5k_pci",
158 .id_table = ath5k_pci_id_table,
159 .probe = ath5k_pci_probe,
160 .remove = __devexit_p(ath5k_pci_remove),
161 .suspend = ath5k_pci_suspend,
162 .resume = ath5k_pci_resume,
163};
164
165
166
167/*
168 * Prototypes - MAC 802.11 stack related functions
169 */
170static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
171 struct ieee80211_tx_control *ctl);
172static int ath5k_reset(struct ieee80211_hw *hw);
173static int ath5k_start(struct ieee80211_hw *hw);
174static void ath5k_stop(struct ieee80211_hw *hw);
175static int ath5k_add_interface(struct ieee80211_hw *hw,
176 struct ieee80211_if_init_conf *conf);
177static void ath5k_remove_interface(struct ieee80211_hw *hw,
178 struct ieee80211_if_init_conf *conf);
179static int ath5k_config(struct ieee80211_hw *hw,
180 struct ieee80211_conf *conf);
Johannes Berg32bfd352007-12-19 01:31:26 +0100181static int ath5k_config_interface(struct ieee80211_hw *hw,
182 struct ieee80211_vif *vif,
Jiri Slabyfa1c1142007-08-12 17:33:16 +0200183 struct ieee80211_if_conf *conf);
184static void ath5k_configure_filter(struct ieee80211_hw *hw,
185 unsigned int changed_flags,
186 unsigned int *new_flags,
187 int mc_count, struct dev_mc_list *mclist);
188static int ath5k_set_key(struct ieee80211_hw *hw,
189 enum set_key_cmd cmd,
190 const u8 *local_addr, const u8 *addr,
191 struct ieee80211_key_conf *key);
192static int ath5k_get_stats(struct ieee80211_hw *hw,
193 struct ieee80211_low_level_stats *stats);
194static int ath5k_get_tx_stats(struct ieee80211_hw *hw,
195 struct ieee80211_tx_queue_stats *stats);
196static u64 ath5k_get_tsf(struct ieee80211_hw *hw);
197static void ath5k_reset_tsf(struct ieee80211_hw *hw);
198static int ath5k_beacon_update(struct ieee80211_hw *hw,
199 struct sk_buff *skb,
200 struct ieee80211_tx_control *ctl);
201
202static struct ieee80211_ops ath5k_hw_ops = {
203 .tx = ath5k_tx,
204 .start = ath5k_start,
205 .stop = ath5k_stop,
206 .add_interface = ath5k_add_interface,
207 .remove_interface = ath5k_remove_interface,
208 .config = ath5k_config,
209 .config_interface = ath5k_config_interface,
210 .configure_filter = ath5k_configure_filter,
211 .set_key = ath5k_set_key,
212 .get_stats = ath5k_get_stats,
213 .conf_tx = NULL,
214 .get_tx_stats = ath5k_get_tx_stats,
215 .get_tsf = ath5k_get_tsf,
216 .reset_tsf = ath5k_reset_tsf,
217 .beacon_update = ath5k_beacon_update,
218};
219
220/*
221 * Prototypes - Internal functions
222 */
223/* Attach detach */
224static int ath5k_attach(struct pci_dev *pdev,
225 struct ieee80211_hw *hw);
226static void ath5k_detach(struct pci_dev *pdev,
227 struct ieee80211_hw *hw);
228/* Channel/mode setup */
229static inline short ath5k_ieee2mhz(short chan);
230static unsigned int ath5k_copy_rates(struct ieee80211_rate *rates,
231 const struct ath5k_rate_table *rt,
232 unsigned int max);
233static unsigned int ath5k_copy_channels(struct ath5k_hw *ah,
234 struct ieee80211_channel *channels,
235 unsigned int mode,
236 unsigned int max);
237static int ath5k_getchannels(struct ieee80211_hw *hw);
238static int ath5k_chan_set(struct ath5k_softc *sc,
239 struct ieee80211_channel *chan);
240static void ath5k_setcurmode(struct ath5k_softc *sc,
241 unsigned int mode);
242static void ath5k_mode_setup(struct ath5k_softc *sc);
243/* Descriptor setup */
244static int ath5k_desc_alloc(struct ath5k_softc *sc,
245 struct pci_dev *pdev);
246static void ath5k_desc_free(struct ath5k_softc *sc,
247 struct pci_dev *pdev);
248/* Buffers setup */
249static int ath5k_rxbuf_setup(struct ath5k_softc *sc,
250 struct ath5k_buf *bf);
251static int ath5k_txbuf_setup(struct ath5k_softc *sc,
252 struct ath5k_buf *bf,
253 struct ieee80211_tx_control *ctl);
254
255static inline void ath5k_txbuf_free(struct ath5k_softc *sc,
256 struct ath5k_buf *bf)
257{
258 BUG_ON(!bf);
259 if (!bf->skb)
260 return;
261 pci_unmap_single(sc->pdev, bf->skbaddr, bf->skb->len,
262 PCI_DMA_TODEVICE);
263 dev_kfree_skb(bf->skb);
264 bf->skb = NULL;
265}
266
267/* Queues setup */
268static struct ath5k_txq *ath5k_txq_setup(struct ath5k_softc *sc,
269 int qtype, int subtype);
270static int ath5k_beaconq_setup(struct ath5k_hw *ah);
271static int ath5k_beaconq_config(struct ath5k_softc *sc);
272static void ath5k_txq_drainq(struct ath5k_softc *sc,
273 struct ath5k_txq *txq);
274static void ath5k_txq_cleanup(struct ath5k_softc *sc);
275static void ath5k_txq_release(struct ath5k_softc *sc);
276/* Rx handling */
277static int ath5k_rx_start(struct ath5k_softc *sc);
278static void ath5k_rx_stop(struct ath5k_softc *sc);
279static unsigned int ath5k_rx_decrypted(struct ath5k_softc *sc,
280 struct ath5k_desc *ds,
281 struct sk_buff *skb);
282static void ath5k_tasklet_rx(unsigned long data);
283/* Tx handling */
284static void ath5k_tx_processq(struct ath5k_softc *sc,
285 struct ath5k_txq *txq);
286static void ath5k_tasklet_tx(unsigned long data);
287/* Beacon handling */
288static int ath5k_beacon_setup(struct ath5k_softc *sc,
289 struct ath5k_buf *bf,
290 struct ieee80211_tx_control *ctl);
291static void ath5k_beacon_send(struct ath5k_softc *sc);
292static void ath5k_beacon_config(struct ath5k_softc *sc);
Bruno Randolf9804b982008-01-19 18:17:59 +0900293static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
Jiri Slabyfa1c1142007-08-12 17:33:16 +0200294
295static inline u64 ath5k_extend_tsf(struct ath5k_hw *ah, u32 rstamp)
296{
297 u64 tsf = ath5k_hw_get_tsf64(ah);
298
299 if ((tsf & 0x7fff) < rstamp)
300 tsf -= 0x8000;
301
302 return (tsf & ~0x7fff) | rstamp;
303}
304
305/* Interrupt handling */
306static int ath5k_init(struct ath5k_softc *sc);
307static int ath5k_stop_locked(struct ath5k_softc *sc);
308static int ath5k_stop_hw(struct ath5k_softc *sc);
309static irqreturn_t ath5k_intr(int irq, void *dev_id);
310static void ath5k_tasklet_reset(unsigned long data);
311
312static void ath5k_calibrate(unsigned long data);
313/* LED functions */
314static void ath5k_led_off(unsigned long data);
315static void ath5k_led_blink(struct ath5k_softc *sc,
316 unsigned int on,
317 unsigned int off);
318static void ath5k_led_event(struct ath5k_softc *sc,
319 int event);
320
321
322/*
323 * Module init/exit functions
324 */
325static int __init
326init_ath5k_pci(void)
327{
328 int ret;
329
330 ath5k_debug_init();
331
332 ret = pci_register_driver(&ath5k_pci_drv_id);
333 if (ret) {
334 printk(KERN_ERR "ath5k_pci: can't register pci driver\n");
335 return ret;
336 }
337
338 return 0;
339}
340
341static void __exit
342exit_ath5k_pci(void)
343{
344 pci_unregister_driver(&ath5k_pci_drv_id);
345
346 ath5k_debug_finish();
347}
348
349module_init(init_ath5k_pci);
350module_exit(exit_ath5k_pci);
351
352
353/********************\
354* PCI Initialization *
355\********************/
356
357static const char *
358ath5k_chip_name(enum ath5k_srev_type type, u_int16_t val)
359{
360 const char *name = "xxxxx";
361 unsigned int i;
362
363 for (i = 0; i < ARRAY_SIZE(srev_names); i++) {
364 if (srev_names[i].sr_type != type)
365 continue;
366 if ((val & 0xff) < srev_names[i + 1].sr_val) {
367 name = srev_names[i].sr_name;
368 break;
369 }
370 }
371
372 return name;
373}
374
375static int __devinit
376ath5k_pci_probe(struct pci_dev *pdev,
377 const struct pci_device_id *id)
378{
379 void __iomem *mem;
380 struct ath5k_softc *sc;
381 struct ieee80211_hw *hw;
382 int ret;
383 u8 csz;
384
385 ret = pci_enable_device(pdev);
386 if (ret) {
387 dev_err(&pdev->dev, "can't enable device\n");
388 goto err;
389 }
390
391 /* XXX 32-bit addressing only */
392 ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
393 if (ret) {
394 dev_err(&pdev->dev, "32-bit DMA not available\n");
395 goto err_dis;
396 }
397
398 /*
399 * Cache line size is used to size and align various
400 * structures used to communicate with the hardware.
401 */
402 pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
403 if (csz == 0) {
404 /*
405 * Linux 2.4.18 (at least) writes the cache line size
406 * register as a 16-bit wide register which is wrong.
407 * We must have this setup properly for rx buffer
408 * DMA to work so force a reasonable value here if it
409 * comes up zero.
410 */
411 csz = L1_CACHE_BYTES / sizeof(u32);
412 pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
413 }
414 /*
415 * The default setting of latency timer yields poor results,
416 * set it to the value used by other systems. It may be worth
417 * tweaking this setting more.
418 */
419 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
420
421 /* Enable bus mastering */
422 pci_set_master(pdev);
423
424 /*
425 * Disable the RETRY_TIMEOUT register (0x41) to keep
426 * PCI Tx retries from interfering with C3 CPU state.
427 */
428 pci_write_config_byte(pdev, 0x41, 0);
429
430 ret = pci_request_region(pdev, 0, "ath5k");
431 if (ret) {
432 dev_err(&pdev->dev, "cannot reserve PCI memory region\n");
433 goto err_dis;
434 }
435
436 mem = pci_iomap(pdev, 0, 0);
437 if (!mem) {
438 dev_err(&pdev->dev, "cannot remap PCI memory region\n") ;
439 ret = -EIO;
440 goto err_reg;
441 }
442
443 /*
444 * Allocate hw (mac80211 main struct)
445 * and hw->priv (driver private data)
446 */
447 hw = ieee80211_alloc_hw(sizeof(*sc), &ath5k_hw_ops);
448 if (hw == NULL) {
449 dev_err(&pdev->dev, "cannot allocate ieee80211_hw\n");
450 ret = -ENOMEM;
451 goto err_map;
452 }
453
454 dev_info(&pdev->dev, "registered as '%s'\n", wiphy_name(hw->wiphy));
455
456 /* Initialize driver private data */
457 SET_IEEE80211_DEV(hw, &pdev->dev);
458 hw->flags = IEEE80211_HW_RX_INCLUDES_FCS;
459 hw->extra_tx_headroom = 2;
460 hw->channel_change_time = 5000;
461 /* these names are misleading */
462 hw->max_rssi = -110; /* signal in dBm */
463 hw->max_noise = -110; /* noise in dBm */
464 hw->max_signal = 100; /* we will provide a percentage based on rssi */
465 sc = hw->priv;
466 sc->hw = hw;
467 sc->pdev = pdev;
468
469 ath5k_debug_init_device(sc);
470
471 /*
472 * Mark the device as detached to avoid processing
473 * interrupts until setup is complete.
474 */
475 __set_bit(ATH_STAT_INVALID, sc->status);
476
477 sc->iobase = mem; /* So we can unmap it on detach */
478 sc->cachelsz = csz * sizeof(u32); /* convert to bytes */
479 sc->opmode = IEEE80211_IF_TYPE_STA;
480 mutex_init(&sc->lock);
481 spin_lock_init(&sc->rxbuflock);
482 spin_lock_init(&sc->txbuflock);
483
484 /* Set private data */
485 pci_set_drvdata(pdev, hw);
486
487 /* Enable msi for devices that support it */
488 pci_enable_msi(pdev);
489
490 /* Setup interrupt handler */
491 ret = request_irq(pdev->irq, ath5k_intr, IRQF_SHARED, "ath", sc);
492 if (ret) {
493 ATH5K_ERR(sc, "request_irq failed\n");
494 goto err_free;
495 }
496
497 /* Initialize device */
498 sc->ah = ath5k_hw_attach(sc, id->driver_data);
499 if (IS_ERR(sc->ah)) {
500 ret = PTR_ERR(sc->ah);
501 goto err_irq;
502 }
503
504 /* Finish private driver data initialization */
505 ret = ath5k_attach(pdev, hw);
506 if (ret)
507 goto err_ah;
508
509 ATH5K_INFO(sc, "Atheros AR%s chip found (MAC: 0x%x, PHY: 0x%x)\n",
510 ath5k_chip_name(AR5K_VERSION_VER,sc->ah->ah_mac_srev),
511 sc->ah->ah_mac_srev,
512 sc->ah->ah_phy_revision);
513
514 if(!sc->ah->ah_single_chip){
515 /* Single chip radio (!RF5111) */
516 if(sc->ah->ah_radio_5ghz_revision && !sc->ah->ah_radio_2ghz_revision) {
517 /* No 5GHz support -> report 2GHz radio */
518 if(!test_bit(MODE_IEEE80211A, sc->ah->ah_capabilities.cap_mode)){
519 ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
520 ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
521 sc->ah->ah_radio_5ghz_revision);
522 /* No 2GHz support (5110 and some 5Ghz only cards) -> report 5Ghz radio */
523 } else if(!test_bit(MODE_IEEE80211B, sc->ah->ah_capabilities.cap_mode)){
524 ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
525 ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
526 sc->ah->ah_radio_5ghz_revision);
527 /* Multiband radio */
528 } else {
529 ATH5K_INFO(sc, "RF%s multiband radio found"
530 " (0x%x)\n",
531 ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
532 sc->ah->ah_radio_5ghz_revision);
533 }
534 }
535 /* Multi chip radio (RF5111 - RF2111) -> report both 2GHz/5GHz radios */
536 else if(sc->ah->ah_radio_5ghz_revision && sc->ah->ah_radio_2ghz_revision){
537 ATH5K_INFO(sc, "RF%s 5GHz radio found (0x%x)\n",
538 ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_5ghz_revision),
539 sc->ah->ah_radio_5ghz_revision);
540 ATH5K_INFO(sc, "RF%s 2GHz radio found (0x%x)\n",
541 ath5k_chip_name(AR5K_VERSION_RAD,sc->ah->ah_radio_2ghz_revision),
542 sc->ah->ah_radio_2ghz_revision);
543 }
544 }
545
546
547 /* ready to process interrupts */
548 __clear_bit(ATH_STAT_INVALID, sc->status);
549
550 return 0;
551err_ah:
552 ath5k_hw_detach(sc->ah);
553err_irq:
554 free_irq(pdev->irq, sc);
555err_free:
556 pci_disable_msi(pdev);
557 ieee80211_free_hw(hw);
558err_map:
559 pci_iounmap(pdev, mem);
560err_reg:
561 pci_release_region(pdev, 0);
562err_dis:
563 pci_disable_device(pdev);
564err:
565 return ret;
566}
567
568static void __devexit
569ath5k_pci_remove(struct pci_dev *pdev)
570{
571 struct ieee80211_hw *hw = pci_get_drvdata(pdev);
572 struct ath5k_softc *sc = hw->priv;
573
574 ath5k_debug_finish_device(sc);
575 ath5k_detach(pdev, hw);
576 ath5k_hw_detach(sc->ah);
577 free_irq(pdev->irq, sc);
578 pci_disable_msi(pdev);
579 pci_iounmap(pdev, sc->iobase);
580 pci_release_region(pdev, 0);
581 pci_disable_device(pdev);
582 ieee80211_free_hw(hw);
583}
584
585#ifdef CONFIG_PM
586static int
587ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
588{
589 struct ieee80211_hw *hw = pci_get_drvdata(pdev);
590 struct ath5k_softc *sc = hw->priv;
591
592 if (test_bit(ATH_STAT_LEDSOFT, sc->status))
593 ath5k_hw_set_gpio(sc->ah, sc->led_pin, 1);
594
595 ath5k_stop_hw(sc);
596 pci_save_state(pdev);
597 pci_disable_device(pdev);
598 pci_set_power_state(pdev, PCI_D3hot);
599
600 return 0;
601}
602
603static int
604ath5k_pci_resume(struct pci_dev *pdev)
605{
606 struct ieee80211_hw *hw = pci_get_drvdata(pdev);
607 struct ath5k_softc *sc = hw->priv;
John W. Linville247ae442008-01-21 15:36:05 -0500608 struct ath5k_hw *ah = sc->ah;
609 int i, err;
Jiri Slabyfa1c1142007-08-12 17:33:16 +0200610
611 err = pci_set_power_state(pdev, PCI_D0);
612 if (err)
613 return err;
614
615 err = pci_enable_device(pdev);
616 if (err)
617 return err;
618
619 pci_restore_state(pdev);
620 /*
621 * Suspend/Resume resets the PCI configuration space, so we have to
622 * re-disable the RETRY_TIMEOUT register (0x41) to keep
623 * PCI Tx retries from interfering with C3 CPU state
624 */
625 pci_write_config_byte(pdev, 0x41, 0);
626
627 ath5k_init(sc);
628 if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
John W. Linville247ae442008-01-21 15:36:05 -0500629 ath5k_hw_set_gpio_output(ah, sc->led_pin);
630 ath5k_hw_set_gpio(ah, sc->led_pin, 0);
Jiri Slabyfa1c1142007-08-12 17:33:16 +0200631 }
632
John W. Linville247ae442008-01-21 15:36:05 -0500633 /*
634 * Reset the key cache since some parts do not
635 * reset the contents on initial power up or resume.
636 *
637 * FIXME: This may need to be revisited when mac80211 becomes
638 * aware of suspend/resume.
639 */
640 for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
641 ath5k_hw_reset_key(ah, i);
642
Jiri Slabyfa1c1142007-08-12 17:33:16 +0200643 return 0;
644}
645#endif /* CONFIG_PM */
646
647
648
649/***********************\
650* Driver Initialization *
651\***********************/
652
653static int
654ath5k_attach(struct pci_dev *pdev, struct ieee80211_hw *hw)
655{
656 struct ath5k_softc *sc = hw->priv;
657 struct ath5k_hw *ah = sc->ah;
658 u8 mac[ETH_ALEN];
659 unsigned int i;
660 int ret;
661
662 ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "devid 0x%x\n", pdev->device);
663
664 /*
665 * Check if the MAC has multi-rate retry support.
666 * We do this by trying to setup a fake extended
667 * descriptor. MAC's that don't have support will
668 * return false w/o doing anything. MAC's that do
669 * support it will return true w/o doing anything.
670 */
671 if (ah->ah_setup_xtx_desc(ah, NULL, 0, 0, 0, 0, 0, 0))
672 __set_bit(ATH_STAT_MRRETRY, sc->status);
673
674 /*
675 * Reset the key cache since some parts do not
676 * reset the contents on initial power up.
677 */
John W. Linvillec65638a2008-01-21 15:36:04 -0500678 for (i = 0; i < AR5K_KEYTABLE_SIZE; i++)
Jiri Slabyfa1c1142007-08-12 17:33:16 +0200679 ath5k_hw_reset_key(ah, i);
680
681 /*
682 * Collect the channel list. The 802.11 layer
683 * is resposible for filtering this list based
684 * on settings like the phy mode and regulatory
685 * domain restrictions.
686 */
687 ret = ath5k_getchannels(hw);
688 if (ret) {
689 ATH5K_ERR(sc, "can't get channels\n");
690 goto err;
691 }
692
693 /* NB: setup here so ath5k_rate_update is happy */
694 if (test_bit(MODE_IEEE80211A, ah->ah_modes))
695 ath5k_setcurmode(sc, MODE_IEEE80211A);
696 else
697 ath5k_setcurmode(sc, MODE_IEEE80211B);
698
699 /*
700 * Allocate tx+rx descriptors and populate the lists.
701 */
702 ret = ath5k_desc_alloc(sc, pdev);
703 if (ret) {
704 ATH5K_ERR(sc, "can't allocate descriptors\n");
705 goto err;
706 }
707
708 /*
709 * Allocate hardware transmit queues: one queue for
710 * beacon frames and one data queue for each QoS
711 * priority. Note that hw functions handle reseting
712 * these queues at the needed time.
713 */
714 ret = ath5k_beaconq_setup(ah);
715 if (ret < 0) {
716 ATH5K_ERR(sc, "can't setup a beacon xmit queue\n");
717 goto err_desc;
718 }
719 sc->bhalq = ret;
720
721 sc->txq = ath5k_txq_setup(sc, AR5K_TX_QUEUE_DATA, AR5K_WME_AC_BK);
722 if (IS_ERR(sc->txq)) {
723 ATH5K_ERR(sc, "can't setup xmit queue\n");
724 ret = PTR_ERR(sc->txq);
725 goto err_bhal;
726 }
727
728 tasklet_init(&sc->rxtq, ath5k_tasklet_rx, (unsigned long)sc);
729 tasklet_init(&sc->txtq, ath5k_tasklet_tx, (unsigned long)sc);
730 tasklet_init(&sc->restq, ath5k_tasklet_reset, (unsigned long)sc);
731 setup_timer(&sc->calib_tim, ath5k_calibrate, (unsigned long)sc);
732 setup_timer(&sc->led_tim, ath5k_led_off, (unsigned long)sc);
733
734 sc->led_on = 0; /* low true */
735 /*
736 * Auto-enable soft led processing for IBM cards and for
737 * 5211 minipci cards.
738 */
739 if (pdev->device == PCI_DEVICE_ID_ATHEROS_AR5212_IBM ||
740 pdev->device == PCI_DEVICE_ID_ATHEROS_AR5211) {
741 __set_bit(ATH_STAT_LEDSOFT, sc->status);
742 sc->led_pin = 0;
743 }
744 /* Enable softled on PIN1 on HP Compaq nc6xx, nc4000 & nx5000 laptops */
745 if (pdev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ) {
746 __set_bit(ATH_STAT_LEDSOFT, sc->status);
747 sc->led_pin = 0;
748 }
749 if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
750 ath5k_hw_set_gpio_output(ah, sc->led_pin);
751 ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on);
752 }
753
754 ath5k_hw_get_lladdr(ah, mac);
755 SET_IEEE80211_PERM_ADDR(hw, mac);
756 /* All MAC address bits matter for ACKs */
757 memset(sc->bssidmask, 0xff, ETH_ALEN);
758 ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
759
760 ret = ieee80211_register_hw(hw);
761 if (ret) {
762 ATH5K_ERR(sc, "can't register ieee80211 hw\n");
763 goto err_queues;
764 }
765
766 return 0;
767err_queues:
768 ath5k_txq_release(sc);
769err_bhal:
770 ath5k_hw_release_tx_queue(ah, sc->bhalq);
771err_desc:
772 ath5k_desc_free(sc, pdev);
773err:
774 return ret;
775}
776
777static void
778ath5k_detach(struct pci_dev *pdev, struct ieee80211_hw *hw)
779{
780 struct ath5k_softc *sc = hw->priv;
781
782 /*
783 * NB: the order of these is important:
784 * o call the 802.11 layer before detaching ath5k_hw to
785 * insure callbacks into the driver to delete global
786 * key cache entries can be handled
787 * o reclaim the tx queue data structures after calling
788 * the 802.11 layer as we'll get called back to reclaim
789 * node state and potentially want to use them
790 * o to cleanup the tx queues the hal is called, so detach
791 * it last
792 * XXX: ??? detach ath5k_hw ???
793 * Other than that, it's straightforward...
794 */
795 ieee80211_unregister_hw(hw);
796 ath5k_desc_free(sc, pdev);
797 ath5k_txq_release(sc);
798 ath5k_hw_release_tx_queue(sc->ah, sc->bhalq);
799
800 /*
801 * NB: can't reclaim these until after ieee80211_ifdetach
802 * returns because we'll get called back to reclaim node
803 * state and potentially want to use them.
804 */
805}
806
807
808
809
810/********************\
811* Channel/mode setup *
812\********************/
813
814/*
815 * Convert IEEE channel number to MHz frequency.
816 */
817static inline short
818ath5k_ieee2mhz(short chan)
819{
820 if (chan <= 14 || chan >= 27)
821 return ieee80211chan2mhz(chan);
822 else
823 return 2212 + chan * 20;
824}
825
826static unsigned int
827ath5k_copy_rates(struct ieee80211_rate *rates,
828 const struct ath5k_rate_table *rt,
829 unsigned int max)
830{
831 unsigned int i, count;
832
833 if (rt == NULL)
834 return 0;
835
836 for (i = 0, count = 0; i < rt->rate_count && max > 0; i++) {
837 if (!rt->rates[i].valid)
838 continue;
839 rates->rate = rt->rates[i].rate_kbps / 100;
840 rates->val = rt->rates[i].rate_code;
841 rates->flags = rt->rates[i].modulation;
842 rates++;
843 count++;
844 max--;
845 }
846
847 return count;
848}
849
850static unsigned int
851ath5k_copy_channels(struct ath5k_hw *ah,
852 struct ieee80211_channel *channels,
853 unsigned int mode,
854 unsigned int max)
855{
856 static const struct { unsigned int mode, mask, chan; } map[] = {
857 [MODE_IEEE80211A] = { CHANNEL_OFDM, CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_A },
858 [MODE_ATHEROS_TURBO] = { CHANNEL_OFDM|CHANNEL_TURBO, CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_T },
859 [MODE_IEEE80211B] = { CHANNEL_CCK, CHANNEL_CCK, CHANNEL_B },
860 [MODE_IEEE80211G] = { CHANNEL_OFDM, CHANNEL_OFDM, CHANNEL_G },
861 [MODE_ATHEROS_TURBOG] = { CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_OFDM | CHANNEL_TURBO, CHANNEL_TG },
862 };
863 static const struct ath5k_regchannel chans_2ghz[] =
864 IEEE80211_CHANNELS_2GHZ;
865 static const struct ath5k_regchannel chans_5ghz[] =
866 IEEE80211_CHANNELS_5GHZ;
867 const struct ath5k_regchannel *chans;
868 enum ath5k_regdom dmn;
869 unsigned int i, count, size, chfreq, all, f, ch;
870
871 if (!test_bit(mode, ah->ah_modes))
872 return 0;
873
874 all = ah->ah_regdomain == DMN_DEFAULT || CHAN_DEBUG == 1;
875
876 switch (mode) {
877 case MODE_IEEE80211A:
878 case MODE_ATHEROS_TURBO:
879 /* 1..220, but 2GHz frequencies are filtered by check_channel */
880 size = all ? 220 : ARRAY_SIZE(chans_5ghz);
881 chans = chans_5ghz;
882 dmn = ath5k_regdom2flag(ah->ah_regdomain,
883 IEEE80211_CHANNELS_5GHZ_MIN);
884 chfreq = CHANNEL_5GHZ;
885 break;
886 case MODE_IEEE80211B:
887 case MODE_IEEE80211G:
888 case MODE_ATHEROS_TURBOG:
889 size = all ? 26 : ARRAY_SIZE(chans_2ghz);
890 chans = chans_2ghz;
891 dmn = ath5k_regdom2flag(ah->ah_regdomain,
892 IEEE80211_CHANNELS_2GHZ_MIN);
893 chfreq = CHANNEL_2GHZ;
894 break;
895 default:
896 ATH5K_WARN(ah->ah_sc, "bad mode, not copying channels\n");
897 return 0;
898 }
899
900 for (i = 0, count = 0; i < size && max > 0; i++) {
901 ch = all ? i + 1 : chans[i].chan;
902 f = ath5k_ieee2mhz(ch);
903 /* Check if channel is supported by the chipset */
904 if (!ath5k_channel_ok(ah, f, chfreq))
905 continue;
906
907 /* Match regulation domain */
908 if (!all && !(IEEE80211_DMN(chans[i].domain) &
909 IEEE80211_DMN(dmn)))
910 continue;
911
912 if (!all && (chans[i].mode & map[mode].mask) != map[mode].mode)
913 continue;
914
915 /* Write channel and increment counter */
916 channels->chan = ch;
917 channels->freq = f;
918 channels->val = map[mode].chan;
919 channels++;
920 count++;
921 max--;
922 }
923
924 return count;
925}
926
927/* Only tries to register modes our EEPROM says it can support */
928#define REGISTER_MODE(m) do { \
929 ret = ath5k_register_mode(hw, m); \
930 if (ret) \
931 return ret; \
932} while (0) \
933
934static inline int
935ath5k_register_mode(struct ieee80211_hw *hw, u8 m)
936{
937 struct ath5k_softc *sc = hw->priv;
938 struct ieee80211_hw_mode *modes = sc->modes;
939 unsigned int i;
940 int ret;
941
942 if (!test_bit(m, sc->ah->ah_capabilities.cap_mode))
943 return 0;
944
945 for (i = 0; i < NUM_DRIVER_MODES; i++) {
946 if (modes[i].mode != m || !modes[i].num_channels)
947 continue;
948 ret = ieee80211_register_hwmode(hw, &modes[i]);
949 if (ret) {
950 ATH5K_ERR(sc, "can't register hwmode %u\n", m);
951 return ret;
952 }
953 return 0;
954 }
955 BUG();
956}
957
958static int
959ath5k_getchannels(struct ieee80211_hw *hw)
960{
961 struct ath5k_softc *sc = hw->priv;
962 struct ath5k_hw *ah = sc->ah;
963 struct ieee80211_hw_mode *modes = sc->modes;
964 unsigned int i, max_r, max_c;
965 int ret;
966
967 BUILD_BUG_ON(ARRAY_SIZE(sc->modes) < 3);
968
969 /* The order here does not matter */
970 modes[0].mode = MODE_IEEE80211G;
971 modes[1].mode = MODE_IEEE80211B;
972 modes[2].mode = MODE_IEEE80211A;
973
974 max_r = ARRAY_SIZE(sc->rates);
975 max_c = ARRAY_SIZE(sc->channels);
976
977 for (i = 0; i < NUM_DRIVER_MODES; i++) {
978 struct ieee80211_hw_mode *mode = &modes[i];
979 const struct ath5k_rate_table *hw_rates;
980
981 if (i == 0) {
982 modes[0].rates = sc->rates;
983 modes->channels = sc->channels;
984 } else {
985 struct ieee80211_hw_mode *prev_mode = &modes[i-1];
986 int prev_num_r = prev_mode->num_rates;
987 int prev_num_c = prev_mode->num_channels;
988 mode->rates = &prev_mode->rates[prev_num_r];
989 mode->channels = &prev_mode->channels[prev_num_c];
990 }
991
992 hw_rates = ath5k_hw_get_rate_table(ah, mode->mode);
993 mode->num_rates = ath5k_copy_rates(mode->rates, hw_rates,
994 max_r);
995 mode->num_channels = ath5k_copy_channels(ah, mode->channels,
996 mode->mode, max_c);
997 max_r -= mode->num_rates;
998 max_c -= mode->num_channels;
999 }
1000
1001 /* We try to register all modes this driver supports. We don't bother
1002 * with MODE_IEEE80211B for AR5212 as MODE_IEEE80211G already accounts
1003 * for that as per mac80211. Then, REGISTER_MODE() will will actually
1004 * check the eeprom reading for more reliable capability information.
1005 * Order matters here as per mac80211's latest preference. This will
1006 * all hopefullly soon go away. */
1007
1008 REGISTER_MODE(MODE_IEEE80211G);
1009 if (ah->ah_version != AR5K_AR5212)
1010 REGISTER_MODE(MODE_IEEE80211B);
1011 REGISTER_MODE(MODE_IEEE80211A);
1012
1013 ath5k_debug_dump_modes(sc, modes);
1014
1015 return ret;
1016}
1017
1018/*
1019 * Set/change channels. If the channel is really being changed,
1020 * it's done by reseting the chip. To accomplish this we must
1021 * first cleanup any pending DMA, then restart stuff after a la
1022 * ath5k_init.
1023 */
1024static int
1025ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
1026{
1027 struct ath5k_hw *ah = sc->ah;
1028 int ret;
1029
1030 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "%u (%u MHz) -> %u (%u MHz)\n",
1031 sc->curchan->chan, sc->curchan->freq,
1032 chan->chan, chan->freq);
1033
1034 if (chan->freq != sc->curchan->freq || chan->val != sc->curchan->val) {
1035 /*
1036 * To switch channels clear any pending DMA operations;
1037 * wait long enough for the RX fifo to drain, reset the
1038 * hardware at the new frequency, and then re-enable
1039 * the relevant bits of the h/w.
1040 */
1041 ath5k_hw_set_intr(ah, 0); /* disable interrupts */
1042 ath5k_txq_cleanup(sc); /* clear pending tx frames */
1043 ath5k_rx_stop(sc); /* turn off frame recv */
1044 ret = ath5k_hw_reset(ah, sc->opmode, chan, true);
1045 if (ret) {
1046 ATH5K_ERR(sc, "%s: unable to reset channel %u "
1047 "(%u Mhz)\n", __func__, chan->chan, chan->freq);
1048 return ret;
1049 }
1050 sc->curchan = chan;
1051 ath5k_hw_set_txpower_limit(sc->ah, 0);
1052
1053 /*
1054 * Re-enable rx framework.
1055 */
1056 ret = ath5k_rx_start(sc);
1057 if (ret) {
1058 ATH5K_ERR(sc, "%s: unable to restart recv logic\n",
1059 __func__);
1060 return ret;
1061 }
1062
1063 /*
1064 * Change channels and update the h/w rate map
1065 * if we're switching; e.g. 11a to 11b/g.
1066 *
1067 * XXX needed?
1068 */
1069/* ath5k_chan_change(sc, chan); */
1070
1071 ath5k_beacon_config(sc);
1072 /*
1073 * Re-enable interrupts.
1074 */
1075 ath5k_hw_set_intr(ah, sc->imask);
1076 }
1077
1078 return 0;
1079}
1080
1081static void
1082ath5k_setcurmode(struct ath5k_softc *sc, unsigned int mode)
1083{
1084 if (unlikely(test_bit(ATH_STAT_LEDSOFT, sc->status))) {
1085 /* from Atheros NDIS driver, w/ permission */
1086 static const struct {
1087 u16 rate; /* tx/rx 802.11 rate */
1088 u16 timeOn; /* LED on time (ms) */
1089 u16 timeOff; /* LED off time (ms) */
1090 } blinkrates[] = {
1091 { 108, 40, 10 },
1092 { 96, 44, 11 },
1093 { 72, 50, 13 },
1094 { 48, 57, 14 },
1095 { 36, 67, 16 },
1096 { 24, 80, 20 },
1097 { 22, 100, 25 },
1098 { 18, 133, 34 },
1099 { 12, 160, 40 },
1100 { 10, 200, 50 },
1101 { 6, 240, 58 },
1102 { 4, 267, 66 },
1103 { 2, 400, 100 },
1104 { 0, 500, 130 }
1105 };
1106 const struct ath5k_rate_table *rt =
1107 ath5k_hw_get_rate_table(sc->ah, mode);
1108 unsigned int i, j;
1109
1110 BUG_ON(rt == NULL);
1111
1112 memset(sc->hwmap, 0, sizeof(sc->hwmap));
1113 for (i = 0; i < 32; i++) {
1114 u8 ix = rt->rate_code_to_index[i];
1115 if (ix == 0xff) {
1116 sc->hwmap[i].ledon = msecs_to_jiffies(500);
1117 sc->hwmap[i].ledoff = msecs_to_jiffies(130);
1118 continue;
1119 }
1120 sc->hwmap[i].txflags = IEEE80211_RADIOTAP_F_DATAPAD;
1121 if (SHPREAMBLE_FLAG(ix) || rt->rates[ix].modulation ==
1122 IEEE80211_RATE_OFDM)
1123 sc->hwmap[i].txflags |=
1124 IEEE80211_RADIOTAP_F_SHORTPRE;
1125 /* receive frames include FCS */
1126 sc->hwmap[i].rxflags = sc->hwmap[i].txflags |
1127 IEEE80211_RADIOTAP_F_FCS;
1128 /* setup blink rate table to avoid per-packet lookup */
1129 for (j = 0; j < ARRAY_SIZE(blinkrates) - 1; j++)
1130 if (blinkrates[j].rate == /* XXX why 7f? */
1131 (rt->rates[ix].dot11_rate&0x7f))
1132 break;
1133
1134 sc->hwmap[i].ledon = msecs_to_jiffies(blinkrates[j].
1135 timeOn);
1136 sc->hwmap[i].ledoff = msecs_to_jiffies(blinkrates[j].
1137 timeOff);
1138 }
1139 }
1140
1141 sc->curmode = mode;
1142}
1143
1144static void
1145ath5k_mode_setup(struct ath5k_softc *sc)
1146{
1147 struct ath5k_hw *ah = sc->ah;
1148 u32 rfilt;
1149
1150 /* configure rx filter */
1151 rfilt = sc->filter_flags;
1152 ath5k_hw_set_rx_filter(ah, rfilt);
1153
1154 if (ath5k_hw_hasbssidmask(ah))
1155 ath5k_hw_set_bssid_mask(ah, sc->bssidmask);
1156
1157 /* configure operational mode */
1158 ath5k_hw_set_opmode(ah);
1159
1160 ath5k_hw_set_mcast_filter(ah, 0, 0);
1161 ATH5K_DBG(sc, ATH5K_DEBUG_MODE, "RX filter 0x%x\n", rfilt);
1162}
1163
1164
1165
1166
1167/***************\
1168* Buffers setup *
1169\***************/
1170
1171static int
1172ath5k_rxbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf)
1173{
1174 struct ath5k_hw *ah = sc->ah;
1175 struct sk_buff *skb = bf->skb;
1176 struct ath5k_desc *ds;
1177
1178 if (likely(skb == NULL)) {
1179 unsigned int off;
1180
1181 /*
1182 * Allocate buffer with headroom_needed space for the
1183 * fake physical layer header at the start.
1184 */
1185 skb = dev_alloc_skb(sc->rxbufsize + sc->cachelsz - 1);
1186 if (unlikely(skb == NULL)) {
1187 ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
1188 sc->rxbufsize + sc->cachelsz - 1);
1189 return -ENOMEM;
1190 }
1191 /*
1192 * Cache-line-align. This is important (for the
1193 * 5210 at least) as not doing so causes bogus data
1194 * in rx'd frames.
1195 */
1196 off = ((unsigned long)skb->data) % sc->cachelsz;
1197 if (off != 0)
1198 skb_reserve(skb, sc->cachelsz - off);
1199
1200 bf->skb = skb;
1201 bf->skbaddr = pci_map_single(sc->pdev,
1202 skb->data, sc->rxbufsize, PCI_DMA_FROMDEVICE);
1203 if (unlikely(pci_dma_mapping_error(bf->skbaddr))) {
1204 ATH5K_ERR(sc, "%s: DMA mapping failed\n", __func__);
1205 dev_kfree_skb(skb);
1206 bf->skb = NULL;
1207 return -ENOMEM;
1208 }
1209 }
1210
1211 /*
1212 * Setup descriptors. For receive we always terminate
1213 * the descriptor list with a self-linked entry so we'll
1214 * not get overrun under high load (as can happen with a
1215 * 5212 when ANI processing enables PHY error frames).
1216 *
1217 * To insure the last descriptor is self-linked we create
1218 * each descriptor as self-linked and add it to the end. As
1219 * each additional descriptor is added the previous self-linked
1220 * entry is ``fixed'' naturally. This should be safe even
1221 * if DMA is happening. When processing RX interrupts we
1222 * never remove/process the last, self-linked, entry on the
1223 * descriptor list. This insures the hardware always has
1224 * someplace to write a new frame.
1225 */
1226 ds = bf->desc;
1227 ds->ds_link = bf->daddr; /* link to self */
1228 ds->ds_data = bf->skbaddr;
1229 ath5k_hw_setup_rx_desc(ah, ds,
1230 skb_tailroom(skb), /* buffer size */
1231 0);
1232
1233 if (sc->rxlink != NULL)
1234 *sc->rxlink = bf->daddr;
1235 sc->rxlink = &ds->ds_link;
1236 return 0;
1237}
1238
1239static int
1240ath5k_txbuf_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
1241 struct ieee80211_tx_control *ctl)
1242{
1243 struct ath5k_hw *ah = sc->ah;
1244 struct ath5k_txq *txq = sc->txq;
1245 struct ath5k_desc *ds = bf->desc;
1246 struct sk_buff *skb = bf->skb;
1247 unsigned int pktlen, flags, keyidx = AR5K_TXKEYIX_INVALID;
1248 int ret;
1249
1250 flags = AR5K_TXDESC_INTREQ | AR5K_TXDESC_CLRDMASK;
1251 bf->ctl = *ctl;
1252 /* XXX endianness */
1253 bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
1254 PCI_DMA_TODEVICE);
1255
1256 if (ctl->flags & IEEE80211_TXCTL_NO_ACK)
1257 flags |= AR5K_TXDESC_NOACK;
1258
1259 pktlen = skb->len + FCS_LEN;
1260
1261 if (!(ctl->flags & IEEE80211_TXCTL_DO_NOT_ENCRYPT)) {
1262 keyidx = ctl->key_idx;
1263 pktlen += ctl->icv_len;
1264 }
1265
1266 ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
1267 ieee80211_get_hdrlen_from_skb(skb), AR5K_PKT_TYPE_NORMAL,
1268 (ctl->power_level * 2), ctl->tx_rate, ctl->retry_limit, keyidx, 0, flags, 0, 0);
1269 if (ret)
1270 goto err_unmap;
1271
1272 ds->ds_link = 0;
1273 ds->ds_data = bf->skbaddr;
1274
1275 spin_lock_bh(&txq->lock);
1276 list_add_tail(&bf->list, &txq->q);
1277 sc->tx_stats.data[txq->qnum].len++;
1278 if (txq->link == NULL) /* is this first packet? */
1279 ath5k_hw_put_tx_buf(ah, txq->qnum, bf->daddr);
1280 else /* no, so only link it */
1281 *txq->link = bf->daddr;
1282
1283 txq->link = &ds->ds_link;
1284 ath5k_hw_tx_start(ah, txq->qnum);
1285 spin_unlock_bh(&txq->lock);
1286
1287 return 0;
1288err_unmap:
1289 pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
1290 return ret;
1291}
1292
1293/*******************\
1294* Descriptors setup *
1295\*******************/
1296
1297static int
1298ath5k_desc_alloc(struct ath5k_softc *sc, struct pci_dev *pdev)
1299{
1300 struct ath5k_desc *ds;
1301 struct ath5k_buf *bf;
1302 dma_addr_t da;
1303 unsigned int i;
1304 int ret;
1305
1306 /* allocate descriptors */
1307 sc->desc_len = sizeof(struct ath5k_desc) *
1308 (ATH_TXBUF + ATH_RXBUF + ATH_BCBUF + 1);
1309 sc->desc = pci_alloc_consistent(pdev, sc->desc_len, &sc->desc_daddr);
1310 if (sc->desc == NULL) {
1311 ATH5K_ERR(sc, "can't allocate descriptors\n");
1312 ret = -ENOMEM;
1313 goto err;
1314 }
1315 ds = sc->desc;
1316 da = sc->desc_daddr;
1317 ATH5K_DBG(sc, ATH5K_DEBUG_ANY, "DMA map: %p (%zu) -> %llx\n",
1318 ds, sc->desc_len, (unsigned long long)sc->desc_daddr);
1319
1320 bf = kcalloc(1 + ATH_TXBUF + ATH_RXBUF + ATH_BCBUF,
1321 sizeof(struct ath5k_buf), GFP_KERNEL);
1322 if (bf == NULL) {
1323 ATH5K_ERR(sc, "can't allocate bufptr\n");
1324 ret = -ENOMEM;
1325 goto err_free;
1326 }
1327 sc->bufptr = bf;
1328
1329 INIT_LIST_HEAD(&sc->rxbuf);
1330 for (i = 0; i < ATH_RXBUF; i++, bf++, ds++, da += sizeof(*ds)) {
1331 bf->desc = ds;
1332 bf->daddr = da;
1333 list_add_tail(&bf->list, &sc->rxbuf);
1334 }
1335
1336 INIT_LIST_HEAD(&sc->txbuf);
1337 sc->txbuf_len = ATH_TXBUF;
1338 for (i = 0; i < ATH_TXBUF; i++, bf++, ds++,
1339 da += sizeof(*ds)) {
1340 bf->desc = ds;
1341 bf->daddr = da;
1342 list_add_tail(&bf->list, &sc->txbuf);
1343 }
1344
1345 /* beacon buffer */
1346 bf->desc = ds;
1347 bf->daddr = da;
1348 sc->bbuf = bf;
1349
1350 return 0;
1351err_free:
1352 pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
1353err:
1354 sc->desc = NULL;
1355 return ret;
1356}
1357
1358static void
1359ath5k_desc_free(struct ath5k_softc *sc, struct pci_dev *pdev)
1360{
1361 struct ath5k_buf *bf;
1362
1363 ath5k_txbuf_free(sc, sc->bbuf);
1364 list_for_each_entry(bf, &sc->txbuf, list)
1365 ath5k_txbuf_free(sc, bf);
1366 list_for_each_entry(bf, &sc->rxbuf, list)
1367 ath5k_txbuf_free(sc, bf);
1368
1369 /* Free memory associated with all descriptors */
1370 pci_free_consistent(pdev, sc->desc_len, sc->desc, sc->desc_daddr);
1371
1372 kfree(sc->bufptr);
1373 sc->bufptr = NULL;
1374}
1375
1376
1377
1378
1379
1380/**************\
1381* Queues setup *
1382\**************/
1383
1384static struct ath5k_txq *
1385ath5k_txq_setup(struct ath5k_softc *sc,
1386 int qtype, int subtype)
1387{
1388 struct ath5k_hw *ah = sc->ah;
1389 struct ath5k_txq *txq;
1390 struct ath5k_txq_info qi = {
1391 .tqi_subtype = subtype,
1392 .tqi_aifs = AR5K_TXQ_USEDEFAULT,
1393 .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
1394 .tqi_cw_max = AR5K_TXQ_USEDEFAULT
1395 };
1396 int qnum;
1397
1398 /*
1399 * Enable interrupts only for EOL and DESC conditions.
1400 * We mark tx descriptors to receive a DESC interrupt
1401 * when a tx queue gets deep; otherwise waiting for the
1402 * EOL to reap descriptors. Note that this is done to
1403 * reduce interrupt load and this only defers reaping
1404 * descriptors, never transmitting frames. Aside from
1405 * reducing interrupts this also permits more concurrency.
1406 * The only potential downside is if the tx queue backs
1407 * up in which case the top half of the kernel may backup
1408 * due to a lack of tx descriptors.
1409 */
1410 qi.tqi_flags = AR5K_TXQ_FLAG_TXEOLINT_ENABLE |
1411 AR5K_TXQ_FLAG_TXDESCINT_ENABLE;
1412 qnum = ath5k_hw_setup_tx_queue(ah, qtype, &qi);
1413 if (qnum < 0) {
1414 /*
1415 * NB: don't print a message, this happens
1416 * normally on parts with too few tx queues
1417 */
1418 return ERR_PTR(qnum);
1419 }
1420 if (qnum >= ARRAY_SIZE(sc->txqs)) {
1421 ATH5K_ERR(sc, "hw qnum %u out of range, max %tu!\n",
1422 qnum, ARRAY_SIZE(sc->txqs));
1423 ath5k_hw_release_tx_queue(ah, qnum);
1424 return ERR_PTR(-EINVAL);
1425 }
1426 txq = &sc->txqs[qnum];
1427 if (!txq->setup) {
1428 txq->qnum = qnum;
1429 txq->link = NULL;
1430 INIT_LIST_HEAD(&txq->q);
1431 spin_lock_init(&txq->lock);
1432 txq->setup = true;
1433 }
1434 return &sc->txqs[qnum];
1435}
1436
1437static int
1438ath5k_beaconq_setup(struct ath5k_hw *ah)
1439{
1440 struct ath5k_txq_info qi = {
1441 .tqi_aifs = AR5K_TXQ_USEDEFAULT,
1442 .tqi_cw_min = AR5K_TXQ_USEDEFAULT,
1443 .tqi_cw_max = AR5K_TXQ_USEDEFAULT,
1444 /* NB: for dynamic turbo, don't enable any other interrupts */
1445 .tqi_flags = AR5K_TXQ_FLAG_TXDESCINT_ENABLE
1446 };
1447
1448 return ath5k_hw_setup_tx_queue(ah, AR5K_TX_QUEUE_BEACON, &qi);
1449}
1450
1451static int
1452ath5k_beaconq_config(struct ath5k_softc *sc)
1453{
1454 struct ath5k_hw *ah = sc->ah;
1455 struct ath5k_txq_info qi;
1456 int ret;
1457
1458 ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
1459 if (ret)
1460 return ret;
1461 if (sc->opmode == IEEE80211_IF_TYPE_AP ||
1462 sc->opmode == IEEE80211_IF_TYPE_IBSS) {
1463 /*
1464 * Always burst out beacon and CAB traffic
1465 * (aifs = cwmin = cwmax = 0)
1466 */
1467 qi.tqi_aifs = 0;
1468 qi.tqi_cw_min = 0;
1469 qi.tqi_cw_max = 0;
1470 }
1471
1472 ret = ath5k_hw_setup_tx_queueprops(ah, sc->bhalq, &qi);
1473 if (ret) {
1474 ATH5K_ERR(sc, "%s: unable to update parameters for beacon "
1475 "hardware queue!\n", __func__);
1476 return ret;
1477 }
1478
1479 return ath5k_hw_reset_tx_queue(ah, sc->bhalq); /* push to h/w */;
1480}
1481
1482static void
1483ath5k_txq_drainq(struct ath5k_softc *sc, struct ath5k_txq *txq)
1484{
1485 struct ath5k_buf *bf, *bf0;
1486
1487 /*
1488 * NB: this assumes output has been stopped and
1489 * we do not need to block ath5k_tx_tasklet
1490 */
1491 spin_lock_bh(&txq->lock);
1492 list_for_each_entry_safe(bf, bf0, &txq->q, list) {
1493 ath5k_debug_printtxbuf(sc, bf, !sc->ah->ah_proc_tx_desc(sc->ah,
1494 bf->desc));
1495
1496 ath5k_txbuf_free(sc, bf);
1497
1498 spin_lock_bh(&sc->txbuflock);
1499 sc->tx_stats.data[txq->qnum].len--;
1500 list_move_tail(&bf->list, &sc->txbuf);
1501 sc->txbuf_len++;
1502 spin_unlock_bh(&sc->txbuflock);
1503 }
1504 txq->link = NULL;
1505 spin_unlock_bh(&txq->lock);
1506}
1507
1508/*
1509 * Drain the transmit queues and reclaim resources.
1510 */
1511static void
1512ath5k_txq_cleanup(struct ath5k_softc *sc)
1513{
1514 struct ath5k_hw *ah = sc->ah;
1515 unsigned int i;
1516
1517 /* XXX return value */
1518 if (likely(!test_bit(ATH_STAT_INVALID, sc->status))) {
1519 /* don't touch the hardware if marked invalid */
1520 ath5k_hw_stop_tx_dma(ah, sc->bhalq);
1521 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "beacon queue %x\n",
1522 ath5k_hw_get_tx_buf(ah, sc->bhalq));
1523 for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
1524 if (sc->txqs[i].setup) {
1525 ath5k_hw_stop_tx_dma(ah, sc->txqs[i].qnum);
1526 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "txq [%u] %x, "
1527 "link %p\n",
1528 sc->txqs[i].qnum,
1529 ath5k_hw_get_tx_buf(ah,
1530 sc->txqs[i].qnum),
1531 sc->txqs[i].link);
1532 }
1533 }
1534 ieee80211_start_queues(sc->hw); /* XXX move to callers */
1535
1536 for (i = 0; i < ARRAY_SIZE(sc->txqs); i++)
1537 if (sc->txqs[i].setup)
1538 ath5k_txq_drainq(sc, &sc->txqs[i]);
1539}
1540
1541static void
1542ath5k_txq_release(struct ath5k_softc *sc)
1543{
1544 struct ath5k_txq *txq = sc->txqs;
1545 unsigned int i;
1546
1547 for (i = 0; i < ARRAY_SIZE(sc->txqs); i++, txq++)
1548 if (txq->setup) {
1549 ath5k_hw_release_tx_queue(sc->ah, txq->qnum);
1550 txq->setup = false;
1551 }
1552}
1553
1554
1555
1556
1557/*************\
1558* RX Handling *
1559\*************/
1560
1561/*
1562 * Enable the receive h/w following a reset.
1563 */
1564static int
1565ath5k_rx_start(struct ath5k_softc *sc)
1566{
1567 struct ath5k_hw *ah = sc->ah;
1568 struct ath5k_buf *bf;
1569 int ret;
1570
1571 sc->rxbufsize = roundup(IEEE80211_MAX_LEN, sc->cachelsz);
1572
1573 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rxbufsize %u\n",
1574 sc->cachelsz, sc->rxbufsize);
1575
1576 sc->rxlink = NULL;
1577
1578 spin_lock_bh(&sc->rxbuflock);
1579 list_for_each_entry(bf, &sc->rxbuf, list) {
1580 ret = ath5k_rxbuf_setup(sc, bf);
1581 if (ret != 0) {
1582 spin_unlock_bh(&sc->rxbuflock);
1583 goto err;
1584 }
1585 }
1586 bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
1587 spin_unlock_bh(&sc->rxbuflock);
1588
1589 ath5k_hw_put_rx_buf(ah, bf->daddr);
1590 ath5k_hw_start_rx(ah); /* enable recv descriptors */
1591 ath5k_mode_setup(sc); /* set filters, etc. */
1592 ath5k_hw_start_rx_pcu(ah); /* re-enable PCU/DMA engine */
1593
1594 return 0;
1595err:
1596 return ret;
1597}
1598
1599/*
1600 * Disable the receive h/w in preparation for a reset.
1601 */
1602static void
1603ath5k_rx_stop(struct ath5k_softc *sc)
1604{
1605 struct ath5k_hw *ah = sc->ah;
1606
1607 ath5k_hw_stop_pcu_recv(ah); /* disable PCU */
1608 ath5k_hw_set_rx_filter(ah, 0); /* clear recv filter */
1609 ath5k_hw_stop_rx_dma(ah); /* disable DMA engine */
1610 mdelay(3); /* 3ms is long enough for 1 frame */
1611
1612 ath5k_debug_printrxbuffs(sc, ah);
1613
1614 sc->rxlink = NULL; /* just in case */
1615}
1616
1617static unsigned int
1618ath5k_rx_decrypted(struct ath5k_softc *sc, struct ath5k_desc *ds,
1619 struct sk_buff *skb)
1620{
1621 struct ieee80211_hdr *hdr = (void *)skb->data;
1622 unsigned int keyix, hlen = ieee80211_get_hdrlen_from_skb(skb);
1623
1624 if (!(ds->ds_rxstat.rs_status & AR5K_RXERR_DECRYPT) &&
1625 ds->ds_rxstat.rs_keyix != AR5K_RXKEYIX_INVALID)
1626 return RX_FLAG_DECRYPTED;
1627
1628 /* Apparently when a default key is used to decrypt the packet
1629 the hw does not set the index used to decrypt. In such cases
1630 get the index from the packet. */
1631 if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED) &&
1632 !(ds->ds_rxstat.rs_status & AR5K_RXERR_DECRYPT) &&
1633 skb->len >= hlen + 4) {
1634 keyix = skb->data[hlen + 3] >> 6;
1635
1636 if (test_bit(keyix, sc->keymap))
1637 return RX_FLAG_DECRYPTED;
1638 }
1639
1640 return 0;
1641}
1642
1643static void
1644ath5k_tasklet_rx(unsigned long data)
1645{
1646 struct ieee80211_rx_status rxs = {};
1647 struct sk_buff *skb;
1648 struct ath5k_softc *sc = (void *)data;
1649 struct ath5k_buf *bf;
1650 struct ath5k_desc *ds;
1651 u16 len;
1652 u8 stat;
1653 int ret;
1654 int hdrlen;
1655 int pad;
1656
1657 spin_lock(&sc->rxbuflock);
1658 do {
1659 if (unlikely(list_empty(&sc->rxbuf))) {
1660 ATH5K_WARN(sc, "empty rx buf pool\n");
1661 break;
1662 }
1663 bf = list_first_entry(&sc->rxbuf, struct ath5k_buf, list);
1664 BUG_ON(bf->skb == NULL);
1665 skb = bf->skb;
1666 ds = bf->desc;
1667
1668 /* TODO only one segment */
1669 pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
1670 sc->desc_len, PCI_DMA_FROMDEVICE);
1671
1672 if (unlikely(ds->ds_link == bf->daddr)) /* this is the end */
1673 break;
1674
1675 ret = sc->ah->ah_proc_rx_desc(sc->ah, ds);
1676 if (unlikely(ret == -EINPROGRESS))
1677 break;
1678 else if (unlikely(ret)) {
1679 ATH5K_ERR(sc, "error in processing rx descriptor\n");
1680 return;
1681 }
1682
1683 if (unlikely(ds->ds_rxstat.rs_more)) {
1684 ATH5K_WARN(sc, "unsupported jumbo\n");
1685 goto next;
1686 }
1687
1688 stat = ds->ds_rxstat.rs_status;
1689 if (unlikely(stat)) {
1690 if (stat & AR5K_RXERR_PHY)
1691 goto next;
1692 if (stat & AR5K_RXERR_DECRYPT) {
1693 /*
1694 * Decrypt error. If the error occurred
1695 * because there was no hardware key, then
1696 * let the frame through so the upper layers
1697 * can process it. This is necessary for 5210
1698 * parts which have no way to setup a ``clear''
1699 * key cache entry.
1700 *
1701 * XXX do key cache faulting
1702 */
1703 if (ds->ds_rxstat.rs_keyix ==
1704 AR5K_RXKEYIX_INVALID &&
1705 !(stat & AR5K_RXERR_CRC))
1706 goto accept;
1707 }
1708 if (stat & AR5K_RXERR_MIC) {
1709 rxs.flag |= RX_FLAG_MMIC_ERROR;
1710 goto accept;
1711 }
1712
1713 /* let crypto-error packets fall through in MNTR */
1714 if ((stat & ~(AR5K_RXERR_DECRYPT|AR5K_RXERR_MIC)) ||
1715 sc->opmode != IEEE80211_IF_TYPE_MNTR)
1716 goto next;
1717 }
1718accept:
1719 len = ds->ds_rxstat.rs_datalen;
1720 pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, len,
1721 PCI_DMA_FROMDEVICE);
1722 pci_unmap_single(sc->pdev, bf->skbaddr, sc->rxbufsize,
1723 PCI_DMA_FROMDEVICE);
1724 bf->skb = NULL;
1725
1726 skb_put(skb, len);
1727
1728 /*
1729 * the hardware adds a padding to 4 byte boundaries between
1730 * the header and the payload data if the header length is
1731 * not multiples of 4 - remove it
1732 */
1733 hdrlen = ieee80211_get_hdrlen_from_skb(skb);
1734 if (hdrlen & 3) {
1735 pad = hdrlen % 4;
1736 memmove(skb->data + pad, skb->data, hdrlen);
1737 skb_pull(skb, pad);
1738 }
1739
1740 if (sc->opmode == IEEE80211_IF_TYPE_MNTR)
1741 rxs.mactime = ath5k_extend_tsf(sc->ah,
1742 ds->ds_rxstat.rs_tstamp);
1743 else
1744 rxs.mactime = ds->ds_rxstat.rs_tstamp;
1745 rxs.freq = sc->curchan->freq;
1746 rxs.channel = sc->curchan->chan;
1747 rxs.phymode = sc->curmode;
1748
1749 /*
1750 * signal quality:
1751 * the names here are misleading and the usage of these
1752 * values by iwconfig makes it even worse
1753 */
1754 /* noise floor in dBm, from the last noise calibration */
1755 rxs.noise = sc->ah->ah_noise_floor;
1756 /* signal level in dBm */
1757 rxs.ssi = rxs.noise + ds->ds_rxstat.rs_rssi;
1758 /*
1759 * "signal" is actually displayed as Link Quality by iwconfig
1760 * we provide a percentage based on rssi (assuming max rssi 64)
1761 */
1762 rxs.signal = ds->ds_rxstat.rs_rssi * 100 / 64;
1763
1764 rxs.antenna = ds->ds_rxstat.rs_antenna;
1765 rxs.rate = ds->ds_rxstat.rs_rate;
1766 rxs.flag |= ath5k_rx_decrypted(sc, ds, skb);
1767
1768 ath5k_debug_dump_skb(sc, skb, "RX ", 0);
1769
1770 __ieee80211_rx(sc->hw, skb, &rxs);
1771 sc->led_rxrate = ds->ds_rxstat.rs_rate;
1772 ath5k_led_event(sc, ATH_LED_RX);
1773next:
1774 list_move_tail(&bf->list, &sc->rxbuf);
1775 } while (ath5k_rxbuf_setup(sc, bf) == 0);
1776 spin_unlock(&sc->rxbuflock);
1777}
1778
1779
1780
1781
1782/*************\
1783* TX Handling *
1784\*************/
1785
1786static void
1787ath5k_tx_processq(struct ath5k_softc *sc, struct ath5k_txq *txq)
1788{
1789 struct ieee80211_tx_status txs = {};
1790 struct ath5k_buf *bf, *bf0;
1791 struct ath5k_desc *ds;
1792 struct sk_buff *skb;
1793 int ret;
1794
1795 spin_lock(&txq->lock);
1796 list_for_each_entry_safe(bf, bf0, &txq->q, list) {
1797 ds = bf->desc;
1798
1799 /* TODO only one segment */
1800 pci_dma_sync_single_for_cpu(sc->pdev, sc->desc_daddr,
1801 sc->desc_len, PCI_DMA_FROMDEVICE);
1802 ret = sc->ah->ah_proc_tx_desc(sc->ah, ds);
1803 if (unlikely(ret == -EINPROGRESS))
1804 break;
1805 else if (unlikely(ret)) {
1806 ATH5K_ERR(sc, "error %d while processing queue %u\n",
1807 ret, txq->qnum);
1808 break;
1809 }
1810
1811 skb = bf->skb;
1812 bf->skb = NULL;
1813 pci_unmap_single(sc->pdev, bf->skbaddr, skb->len,
1814 PCI_DMA_TODEVICE);
1815
1816 txs.control = bf->ctl;
1817 txs.retry_count = ds->ds_txstat.ts_shortretry +
1818 ds->ds_txstat.ts_longretry / 6;
1819 if (unlikely(ds->ds_txstat.ts_status)) {
1820 sc->ll_stats.dot11ACKFailureCount++;
1821 if (ds->ds_txstat.ts_status & AR5K_TXERR_XRETRY)
1822 txs.excessive_retries = 1;
1823 else if (ds->ds_txstat.ts_status & AR5K_TXERR_FILT)
1824 txs.flags |= IEEE80211_TX_STATUS_TX_FILTERED;
1825 } else {
1826 txs.flags |= IEEE80211_TX_STATUS_ACK;
1827 txs.ack_signal = ds->ds_txstat.ts_rssi;
1828 }
1829
1830 ieee80211_tx_status(sc->hw, skb, &txs);
1831 sc->tx_stats.data[txq->qnum].count++;
1832
1833 spin_lock(&sc->txbuflock);
1834 sc->tx_stats.data[txq->qnum].len--;
1835 list_move_tail(&bf->list, &sc->txbuf);
1836 sc->txbuf_len++;
1837 spin_unlock(&sc->txbuflock);
1838 }
1839 if (likely(list_empty(&txq->q)))
1840 txq->link = NULL;
1841 spin_unlock(&txq->lock);
1842 if (sc->txbuf_len > ATH_TXBUF / 5)
1843 ieee80211_wake_queues(sc->hw);
1844}
1845
1846static void
1847ath5k_tasklet_tx(unsigned long data)
1848{
1849 struct ath5k_softc *sc = (void *)data;
1850
1851 ath5k_tx_processq(sc, sc->txq);
1852
1853 ath5k_led_event(sc, ATH_LED_TX);
1854}
1855
1856
1857
1858
1859/*****************\
1860* Beacon handling *
1861\*****************/
1862
1863/*
1864 * Setup the beacon frame for transmit.
1865 */
1866static int
1867ath5k_beacon_setup(struct ath5k_softc *sc, struct ath5k_buf *bf,
1868 struct ieee80211_tx_control *ctl)
1869{
1870 struct sk_buff *skb = bf->skb;
1871 struct ath5k_hw *ah = sc->ah;
1872 struct ath5k_desc *ds;
1873 int ret, antenna = 0;
1874 u32 flags;
1875
1876 bf->skbaddr = pci_map_single(sc->pdev, skb->data, skb->len,
1877 PCI_DMA_TODEVICE);
1878 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON, "skb %p [data %p len %u] "
1879 "skbaddr %llx\n", skb, skb->data, skb->len,
1880 (unsigned long long)bf->skbaddr);
1881 if (pci_dma_mapping_error(bf->skbaddr)) {
1882 ATH5K_ERR(sc, "beacon DMA mapping failed\n");
1883 return -EIO;
1884 }
1885
1886 ds = bf->desc;
1887
1888 flags = AR5K_TXDESC_NOACK;
1889 if (sc->opmode == IEEE80211_IF_TYPE_IBSS && ath5k_hw_hasveol(ah)) {
1890 ds->ds_link = bf->daddr; /* self-linked */
1891 flags |= AR5K_TXDESC_VEOL;
1892 /*
1893 * Let hardware handle antenna switching if txantenna is not set
1894 */
1895 } else {
1896 ds->ds_link = 0;
1897 /*
1898 * Switch antenna every 4 beacons if txantenna is not set
1899 * XXX assumes two antennas
1900 */
1901 if (antenna == 0)
1902 antenna = sc->bsent & 4 ? 2 : 1;
1903 }
1904
1905 ds->ds_data = bf->skbaddr;
1906 ret = ah->ah_setup_tx_desc(ah, ds, skb->len + FCS_LEN,
1907 ieee80211_get_hdrlen_from_skb(skb),
1908 AR5K_PKT_TYPE_BEACON, (ctl->power_level * 2), ctl->tx_rate, 1,
1909 AR5K_TXKEYIX_INVALID, antenna, flags, 0, 0);
1910 if (ret)
1911 goto err_unmap;
1912
1913 return 0;
1914err_unmap:
1915 pci_unmap_single(sc->pdev, bf->skbaddr, skb->len, PCI_DMA_TODEVICE);
1916 return ret;
1917}
1918
1919/*
1920 * Transmit a beacon frame at SWBA. Dynamic updates to the
1921 * frame contents are done as needed and the slot time is
1922 * also adjusted based on current state.
1923 *
1924 * this is usually called from interrupt context (ath5k_intr())
1925 * but also from ath5k_beacon_config() in IBSS mode which in turn
1926 * can be called from a tasklet and user context
1927 */
1928static void
1929ath5k_beacon_send(struct ath5k_softc *sc)
1930{
1931 struct ath5k_buf *bf = sc->bbuf;
1932 struct ath5k_hw *ah = sc->ah;
1933
1934 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON_PROC, "in beacon_send\n");
1935
1936 if (unlikely(bf->skb == NULL || sc->opmode == IEEE80211_IF_TYPE_STA ||
1937 sc->opmode == IEEE80211_IF_TYPE_MNTR)) {
1938 ATH5K_WARN(sc, "bf=%p bf_skb=%p\n", bf, bf ? bf->skb : NULL);
1939 return;
1940 }
1941 /*
1942 * Check if the previous beacon has gone out. If
1943 * not don't don't try to post another, skip this
1944 * period and wait for the next. Missed beacons
1945 * indicate a problem and should not occur. If we
1946 * miss too many consecutive beacons reset the device.
1947 */
1948 if (unlikely(ath5k_hw_num_tx_pending(ah, sc->bhalq) != 0)) {
1949 sc->bmisscount++;
1950 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON_PROC,
1951 "missed %u consecutive beacons\n", sc->bmisscount);
1952 if (sc->bmisscount > 3) { /* NB: 3 is a guess */
1953 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON_PROC,
1954 "stuck beacon time (%u missed)\n",
1955 sc->bmisscount);
1956 tasklet_schedule(&sc->restq);
1957 }
1958 return;
1959 }
1960 if (unlikely(sc->bmisscount != 0)) {
1961 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON_PROC,
1962 "resume beacon xmit after %u misses\n",
1963 sc->bmisscount);
1964 sc->bmisscount = 0;
1965 }
1966
1967 /*
1968 * Stop any current dma and put the new frame on the queue.
1969 * This should never fail since we check above that no frames
1970 * are still pending on the queue.
1971 */
1972 if (unlikely(ath5k_hw_stop_tx_dma(ah, sc->bhalq))) {
1973 ATH5K_WARN(sc, "beacon queue %u didn't stop?\n", sc->bhalq);
1974 /* NB: hw still stops DMA, so proceed */
1975 }
1976 pci_dma_sync_single_for_cpu(sc->pdev, bf->skbaddr, bf->skb->len,
1977 PCI_DMA_TODEVICE);
1978
1979 ath5k_hw_put_tx_buf(ah, sc->bhalq, bf->daddr);
1980 ath5k_hw_tx_start(ah, sc->bhalq);
1981 ATH5K_DBG(sc, ATH5K_DEBUG_BEACON_PROC, "TXDP[%u] = %llx (%p)\n",
1982 sc->bhalq, (unsigned long long)bf->daddr, bf->desc);
1983
1984 sc->bsent++;
1985}
1986
1987
Bruno Randolf9804b982008-01-19 18:17:59 +09001988/**
1989 * ath5k_beacon_update_timers - update beacon timers
1990 *
1991 * @sc: struct ath5k_softc pointer we are operating on
1992 * @bc_tsf: the timestamp of the beacon. 0 to reset the TSF. -1 to perform a
1993 * beacon timer update based on the current HW TSF.
1994 *
1995 * Calculate the next target beacon transmit time (TBTT) based on the timestamp
1996 * of a received beacon or the current local hardware TSF and write it to the
1997 * beacon timer registers.
1998 *
1999 * This is called in a variety of situations, e.g. when a beacon is received,
2000 * when a HW merge has been detected, but also when an new IBSS is created or
2001 * when we otherwise know we have to update the timers, but we keep it in this
2002 * function to have it all together in one place.
2003 */
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002004static void
Bruno Randolf9804b982008-01-19 18:17:59 +09002005ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002006{
2007 struct ath5k_hw *ah = sc->ah;
Bruno Randolf9804b982008-01-19 18:17:59 +09002008 u32 nexttbtt, intval, hw_tu, bc_tu;
2009 u64 hw_tsf;
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002010
2011 intval = sc->bintval & AR5K_BEACON_PERIOD;
2012 if (WARN_ON(!intval))
2013 return;
2014
Bruno Randolf9804b982008-01-19 18:17:59 +09002015 /* beacon TSF converted to TU */
2016 bc_tu = TSF_TO_TU(bc_tsf);
2017
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002018 /* current TSF converted to TU */
Bruno Randolf9804b982008-01-19 18:17:59 +09002019 hw_tsf = ath5k_hw_get_tsf64(ah);
2020 hw_tu = TSF_TO_TU(hw_tsf);
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002021
Bruno Randolf9804b982008-01-19 18:17:59 +09002022#define FUDGE 3
2023 /* we use FUDGE to make sure the next TBTT is ahead of the current TU */
2024 if (bc_tsf == -1) {
2025 /*
2026 * no beacons received, called internally.
2027 * just need to refresh timers based on HW TSF.
2028 */
2029 nexttbtt = roundup(hw_tu + FUDGE, intval);
2030 } else if (bc_tsf == 0) {
2031 /*
2032 * no beacon received, probably called by ath5k_reset_tsf().
2033 * reset TSF to start with 0.
2034 */
2035 nexttbtt = intval;
2036 intval |= AR5K_BEACON_RESET_TSF;
2037 } else if (bc_tsf > hw_tsf) {
2038 /*
2039 * beacon received, SW merge happend but HW TSF not yet updated.
2040 * not possible to reconfigure timers yet, but next time we
2041 * receive a beacon with the same BSSID, the hardware will
2042 * automatically update the TSF and then we need to reconfigure
2043 * the timers.
2044 */
2045 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2046 "need to wait for HW TSF sync\n");
2047 return;
2048 } else {
2049 /*
2050 * most important case for beacon synchronization between STA.
2051 *
2052 * beacon received and HW TSF has been already updated by HW.
2053 * update next TBTT based on the TSF of the beacon, but make
2054 * sure it is ahead of our local TSF timer.
2055 */
2056 nexttbtt = bc_tu + roundup(hw_tu + FUDGE - bc_tu, intval);
2057 }
2058#undef FUDGE
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002059
2060 intval |= AR5K_BEACON_ENA;
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002061 ath5k_hw_init_beacon(ah, nexttbtt, intval);
Bruno Randolf9804b982008-01-19 18:17:59 +09002062
2063 /*
2064 * debugging output last in order to preserve the time critical aspect
2065 * of this function
2066 */
2067 if (bc_tsf == -1)
2068 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2069 "reconfigured timers based on HW TSF\n");
2070 else if (bc_tsf == 0)
2071 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2072 "reset HW TSF and timers\n");
2073 else
2074 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2075 "updated timers based on beacon TSF\n");
2076
2077 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON,
2078 "bc_tsf %llx hw_tsf %llx bc_tu %u hw_tu %u nexttbtt %u\n",
2079 bc_tsf, hw_tsf, bc_tu, hw_tu, nexttbtt);
2080 ATH5K_DBG_UNLIMIT(sc, ATH5K_DEBUG_BEACON, "intval %u %s %s\n",
2081 intval & AR5K_BEACON_PERIOD,
2082 intval & AR5K_BEACON_ENA ? "AR5K_BEACON_ENA" : "",
2083 intval & AR5K_BEACON_RESET_TSF ? "AR5K_BEACON_RESET_TSF" : "");
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002084}
2085
2086
2087/*
2088 * Configure the beacon timers and interrupts based on the operating mode
2089 *
2090 * When operating in station mode we want to receive a BMISS interrupt when we
2091 * stop seeing beacons from the AP we've associated with so we can look for
2092 * another AP to associate with.
2093 *
2094 * In IBSS mode we need to configure the beacon timers and use a self-linked tx
2095 * descriptor if possible. If the hardware cannot deal with that we enable SWBA
2096 * interrupts to send the beacons from the interrupt handler.
2097 */
2098static void
2099ath5k_beacon_config(struct ath5k_softc *sc)
2100{
2101 struct ath5k_hw *ah = sc->ah;
2102
2103 ath5k_hw_set_intr(ah, 0);
2104 sc->bmisscount = 0;
2105
2106 if (sc->opmode == IEEE80211_IF_TYPE_STA) {
2107 sc->imask |= AR5K_INT_BMISS;
2108 } else if (sc->opmode == IEEE80211_IF_TYPE_IBSS) {
2109 /*
2110 * In IBSS mode enable the beacon timers but only enable SWBA
2111 * interrupts if we need to manually prepare beacon frames.
2112 * Otherwise we use a self-linked tx descriptor and let the
2113 * hardware deal with things. In that case we have to load it
2114 * only once here.
2115 */
2116 ath5k_beaconq_config(sc);
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002117
2118 if (!ath5k_hw_hasveol(ah))
2119 sc->imask |= AR5K_INT_SWBA;
2120 else
2121 ath5k_beacon_send(sc);
2122 }
2123 /* TODO else AP */
2124
2125 ath5k_hw_set_intr(ah, sc->imask);
2126}
2127
2128
2129/********************\
2130* Interrupt handling *
2131\********************/
2132
2133static int
2134ath5k_init(struct ath5k_softc *sc)
2135{
2136 int ret;
2137
2138 mutex_lock(&sc->lock);
2139
2140 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mode %d\n", sc->opmode);
2141
2142 /*
2143 * Stop anything previously setup. This is safe
2144 * no matter this is the first time through or not.
2145 */
2146 ath5k_stop_locked(sc);
2147
2148 /*
2149 * The basic interface to setting the hardware in a good
2150 * state is ``reset''. On return the hardware is known to
2151 * be powered up and with interrupts disabled. This must
2152 * be followed by initialization of the appropriate bits
2153 * and then setup of the interrupt mask.
2154 */
2155 sc->curchan = sc->hw->conf.chan;
2156 ret = ath5k_hw_reset(sc->ah, sc->opmode, sc->curchan, false);
2157 if (ret) {
2158 ATH5K_ERR(sc, "unable to reset hardware: %d\n", ret);
2159 goto done;
2160 }
2161 /*
2162 * This is needed only to setup initial state
2163 * but it's best done after a reset.
2164 */
2165 ath5k_hw_set_txpower_limit(sc->ah, 0);
2166
2167 /*
2168 * Setup the hardware after reset: the key cache
2169 * is filled as needed and the receive engine is
2170 * set going. Frame transmit is handled entirely
2171 * in the frame output path; there's nothing to do
2172 * here except setup the interrupt mask.
2173 */
2174 ret = ath5k_rx_start(sc);
2175 if (ret)
2176 goto done;
2177
2178 /*
2179 * Enable interrupts.
2180 */
2181 sc->imask = AR5K_INT_RX | AR5K_INT_TX | AR5K_INT_RXEOL |
2182 AR5K_INT_RXORN | AR5K_INT_FATAL | AR5K_INT_GLOBAL;
2183
2184 ath5k_hw_set_intr(sc->ah, sc->imask);
2185 /* Set ack to be sent at low bit-rates */
2186 ath5k_hw_set_ack_bitrate_high(sc->ah, false);
2187
2188 mod_timer(&sc->calib_tim, round_jiffies(jiffies +
2189 msecs_to_jiffies(ath5k_calinterval * 1000)));
2190
2191 ret = 0;
2192done:
2193 mutex_unlock(&sc->lock);
2194 return ret;
2195}
2196
2197static int
2198ath5k_stop_locked(struct ath5k_softc *sc)
2199{
2200 struct ath5k_hw *ah = sc->ah;
2201
2202 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "invalid %u\n",
2203 test_bit(ATH_STAT_INVALID, sc->status));
2204
2205 /*
2206 * Shutdown the hardware and driver:
2207 * stop output from above
2208 * disable interrupts
2209 * turn off timers
2210 * turn off the radio
2211 * clear transmit machinery
2212 * clear receive machinery
2213 * drain and release tx queues
2214 * reclaim beacon resources
2215 * power down hardware
2216 *
2217 * Note that some of this work is not possible if the
2218 * hardware is gone (invalid).
2219 */
2220 ieee80211_stop_queues(sc->hw);
2221
2222 if (!test_bit(ATH_STAT_INVALID, sc->status)) {
2223 if (test_bit(ATH_STAT_LEDSOFT, sc->status)) {
2224 del_timer_sync(&sc->led_tim);
2225 ath5k_hw_set_gpio(ah, sc->led_pin, !sc->led_on);
2226 __clear_bit(ATH_STAT_LEDBLINKING, sc->status);
2227 }
2228 ath5k_hw_set_intr(ah, 0);
2229 }
2230 ath5k_txq_cleanup(sc);
2231 if (!test_bit(ATH_STAT_INVALID, sc->status)) {
2232 ath5k_rx_stop(sc);
2233 ath5k_hw_phy_disable(ah);
2234 } else
2235 sc->rxlink = NULL;
2236
2237 return 0;
2238}
2239
2240/*
2241 * Stop the device, grabbing the top-level lock to protect
2242 * against concurrent entry through ath5k_init (which can happen
2243 * if another thread does a system call and the thread doing the
2244 * stop is preempted).
2245 */
2246static int
2247ath5k_stop_hw(struct ath5k_softc *sc)
2248{
2249 int ret;
2250
2251 mutex_lock(&sc->lock);
2252 ret = ath5k_stop_locked(sc);
2253 if (ret == 0 && !test_bit(ATH_STAT_INVALID, sc->status)) {
2254 /*
2255 * Set the chip in full sleep mode. Note that we are
2256 * careful to do this only when bringing the interface
2257 * completely to a stop. When the chip is in this state
2258 * it must be carefully woken up or references to
2259 * registers in the PCI clock domain may freeze the bus
2260 * (and system). This varies by chip and is mostly an
2261 * issue with newer parts that go to sleep more quickly.
2262 */
2263 if (sc->ah->ah_mac_srev >= 0x78) {
2264 /*
2265 * XXX
2266 * don't put newer MAC revisions > 7.8 to sleep because
2267 * of the above mentioned problems
2268 */
2269 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "mac version > 7.8, "
2270 "not putting device to sleep\n");
2271 } else {
2272 ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
2273 "putting device to full sleep\n");
2274 ath5k_hw_set_power(sc->ah, AR5K_PM_FULL_SLEEP, true, 0);
2275 }
2276 }
2277 ath5k_txbuf_free(sc, sc->bbuf);
2278 mutex_unlock(&sc->lock);
2279
2280 del_timer_sync(&sc->calib_tim);
2281
2282 return ret;
2283}
2284
2285static irqreturn_t
2286ath5k_intr(int irq, void *dev_id)
2287{
2288 struct ath5k_softc *sc = dev_id;
2289 struct ath5k_hw *ah = sc->ah;
2290 enum ath5k_int status;
2291 unsigned int counter = 1000;
2292
2293 if (unlikely(test_bit(ATH_STAT_INVALID, sc->status) ||
2294 !ath5k_hw_is_intr_pending(ah)))
2295 return IRQ_NONE;
2296
2297 do {
2298 /*
2299 * Figure out the reason(s) for the interrupt. Note
2300 * that get_isr returns a pseudo-ISR that may include
2301 * bits we haven't explicitly enabled so we mask the
2302 * value to insure we only process bits we requested.
2303 */
2304 ath5k_hw_get_isr(ah, &status); /* NB: clears IRQ too */
2305 ATH5K_DBG(sc, ATH5K_DEBUG_INTR, "status 0x%x/0x%x\n",
2306 status, sc->imask);
2307 status &= sc->imask; /* discard unasked for bits */
2308 if (unlikely(status & AR5K_INT_FATAL)) {
2309 /*
2310 * Fatal errors are unrecoverable.
2311 * Typically these are caused by DMA errors.
2312 */
2313 tasklet_schedule(&sc->restq);
2314 } else if (unlikely(status & AR5K_INT_RXORN)) {
2315 tasklet_schedule(&sc->restq);
2316 } else {
2317 if (status & AR5K_INT_SWBA) {
2318 /*
2319 * Software beacon alert--time to send a beacon.
2320 * Handle beacon transmission directly; deferring
2321 * this is too slow to meet timing constraints
2322 * under load.
2323 */
2324 ath5k_beacon_send(sc);
2325 }
2326 if (status & AR5K_INT_RXEOL) {
2327 /*
2328 * NB: the hardware should re-read the link when
2329 * RXE bit is written, but it doesn't work at
2330 * least on older hardware revs.
2331 */
2332 sc->rxlink = NULL;
2333 }
2334 if (status & AR5K_INT_TXURN) {
2335 /* bump tx trigger level */
2336 ath5k_hw_update_tx_triglevel(ah, true);
2337 }
2338 if (status & AR5K_INT_RX)
2339 tasklet_schedule(&sc->rxtq);
2340 if (status & AR5K_INT_TX)
2341 tasklet_schedule(&sc->txtq);
2342 if (status & AR5K_INT_BMISS) {
2343 }
2344 if (status & AR5K_INT_MIB) {
2345 /* TODO */
2346 }
2347 }
2348 } while (ath5k_hw_is_intr_pending(ah) && counter-- > 0);
2349
2350 if (unlikely(!counter))
2351 ATH5K_WARN(sc, "too many interrupts, giving up for now\n");
2352
2353 return IRQ_HANDLED;
2354}
2355
2356static void
2357ath5k_tasklet_reset(unsigned long data)
2358{
2359 struct ath5k_softc *sc = (void *)data;
2360
2361 ath5k_reset(sc->hw);
2362}
2363
2364/*
2365 * Periodically recalibrate the PHY to account
2366 * for temperature/environment changes.
2367 */
2368static void
2369ath5k_calibrate(unsigned long data)
2370{
2371 struct ath5k_softc *sc = (void *)data;
2372 struct ath5k_hw *ah = sc->ah;
2373
2374 ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n",
2375 sc->curchan->chan, sc->curchan->val);
2376
2377 if (ath5k_hw_get_rf_gain(ah) == AR5K_RFGAIN_NEED_CHANGE) {
2378 /*
2379 * Rfgain is out of bounds, reset the chip
2380 * to load new gain values.
2381 */
2382 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "calibration, resetting\n");
2383 ath5k_reset(sc->hw);
2384 }
2385 if (ath5k_hw_phy_calibrate(ah, sc->curchan))
2386 ATH5K_ERR(sc, "calibration of channel %u failed\n",
2387 sc->curchan->chan);
2388
2389 mod_timer(&sc->calib_tim, round_jiffies(jiffies +
2390 msecs_to_jiffies(ath5k_calinterval * 1000)));
2391}
2392
2393
2394
2395/***************\
2396* LED functions *
2397\***************/
2398
2399static void
2400ath5k_led_off(unsigned long data)
2401{
2402 struct ath5k_softc *sc = (void *)data;
2403
2404 if (test_bit(ATH_STAT_LEDENDBLINK, sc->status))
2405 __clear_bit(ATH_STAT_LEDBLINKING, sc->status);
2406 else {
2407 __set_bit(ATH_STAT_LEDENDBLINK, sc->status);
2408 ath5k_hw_set_gpio(sc->ah, sc->led_pin, !sc->led_on);
2409 mod_timer(&sc->led_tim, jiffies + sc->led_off);
2410 }
2411}
2412
2413/*
2414 * Blink the LED according to the specified on/off times.
2415 */
2416static void
2417ath5k_led_blink(struct ath5k_softc *sc, unsigned int on,
2418 unsigned int off)
2419{
2420 ATH5K_DBG(sc, ATH5K_DEBUG_LED, "on %u off %u\n", on, off);
2421 ath5k_hw_set_gpio(sc->ah, sc->led_pin, sc->led_on);
2422 __set_bit(ATH_STAT_LEDBLINKING, sc->status);
2423 __clear_bit(ATH_STAT_LEDENDBLINK, sc->status);
2424 sc->led_off = off;
2425 mod_timer(&sc->led_tim, jiffies + on);
2426}
2427
2428static void
2429ath5k_led_event(struct ath5k_softc *sc, int event)
2430{
2431 if (likely(!test_bit(ATH_STAT_LEDSOFT, sc->status)))
2432 return;
2433 if (unlikely(test_bit(ATH_STAT_LEDBLINKING, sc->status)))
2434 return; /* don't interrupt active blink */
2435 switch (event) {
2436 case ATH_LED_TX:
2437 ath5k_led_blink(sc, sc->hwmap[sc->led_txrate].ledon,
2438 sc->hwmap[sc->led_txrate].ledoff);
2439 break;
2440 case ATH_LED_RX:
2441 ath5k_led_blink(sc, sc->hwmap[sc->led_rxrate].ledon,
2442 sc->hwmap[sc->led_rxrate].ledoff);
2443 break;
2444 }
2445}
2446
2447
2448
2449
2450/********************\
2451* Mac80211 functions *
2452\********************/
2453
2454static int
2455ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
2456 struct ieee80211_tx_control *ctl)
2457{
2458 struct ath5k_softc *sc = hw->priv;
2459 struct ath5k_buf *bf;
2460 unsigned long flags;
2461 int hdrlen;
2462 int pad;
2463
2464 ath5k_debug_dump_skb(sc, skb, "TX ", 1);
2465
2466 if (sc->opmode == IEEE80211_IF_TYPE_MNTR)
2467 ATH5K_DBG(sc, ATH5K_DEBUG_XMIT, "tx in monitor (scan?)\n");
2468
2469 /*
2470 * the hardware expects the header padded to 4 byte boundaries
2471 * if this is not the case we add the padding after the header
2472 */
2473 hdrlen = ieee80211_get_hdrlen_from_skb(skb);
2474 if (hdrlen & 3) {
2475 pad = hdrlen % 4;
2476 if (skb_headroom(skb) < pad) {
2477 ATH5K_ERR(sc, "tx hdrlen not %%4: %d not enough"
2478 " headroom to pad %d\n", hdrlen, pad);
2479 return -1;
2480 }
2481 skb_push(skb, pad);
2482 memmove(skb->data, skb->data+pad, hdrlen);
2483 }
2484
2485 sc->led_txrate = ctl->tx_rate;
2486
2487 spin_lock_irqsave(&sc->txbuflock, flags);
2488 if (list_empty(&sc->txbuf)) {
2489 ATH5K_ERR(sc, "no further txbuf available, dropping packet\n");
2490 spin_unlock_irqrestore(&sc->txbuflock, flags);
2491 ieee80211_stop_queue(hw, ctl->queue);
2492 return -1;
2493 }
2494 bf = list_first_entry(&sc->txbuf, struct ath5k_buf, list);
2495 list_del(&bf->list);
2496 sc->txbuf_len--;
2497 if (list_empty(&sc->txbuf))
2498 ieee80211_stop_queues(hw);
2499 spin_unlock_irqrestore(&sc->txbuflock, flags);
2500
2501 bf->skb = skb;
2502
2503 if (ath5k_txbuf_setup(sc, bf, ctl)) {
2504 bf->skb = NULL;
2505 spin_lock_irqsave(&sc->txbuflock, flags);
2506 list_add_tail(&bf->list, &sc->txbuf);
2507 sc->txbuf_len++;
2508 spin_unlock_irqrestore(&sc->txbuflock, flags);
2509 dev_kfree_skb_any(skb);
2510 return 0;
2511 }
2512
2513 return 0;
2514}
2515
2516static int
2517ath5k_reset(struct ieee80211_hw *hw)
2518{
2519 struct ath5k_softc *sc = hw->priv;
2520 struct ath5k_hw *ah = sc->ah;
2521 int ret;
2522
2523 ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
2524 /*
2525 * Convert to a hw channel description with the flags
2526 * constrained to reflect the current operating mode.
2527 */
2528 sc->curchan = hw->conf.chan;
2529
2530 ath5k_hw_set_intr(ah, 0);
2531 ath5k_txq_cleanup(sc);
2532 ath5k_rx_stop(sc);
2533
2534 ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
2535 if (unlikely(ret)) {
2536 ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
2537 goto err;
2538 }
2539 ath5k_hw_set_txpower_limit(sc->ah, 0);
2540
2541 ret = ath5k_rx_start(sc);
2542 if (unlikely(ret)) {
2543 ATH5K_ERR(sc, "can't start recv logic\n");
2544 goto err;
2545 }
2546 /*
2547 * We may be doing a reset in response to an ioctl
2548 * that changes the channel so update any state that
2549 * might change as a result.
2550 *
2551 * XXX needed?
2552 */
2553/* ath5k_chan_change(sc, c); */
2554 ath5k_beacon_config(sc);
2555 /* intrs are started by ath5k_beacon_config */
2556
2557 ieee80211_wake_queues(hw);
2558
2559 return 0;
2560err:
2561 return ret;
2562}
2563
2564static int ath5k_start(struct ieee80211_hw *hw)
2565{
2566 return ath5k_init(hw->priv);
2567}
2568
2569static void ath5k_stop(struct ieee80211_hw *hw)
2570{
2571 ath5k_stop_hw(hw->priv);
2572}
2573
2574static int ath5k_add_interface(struct ieee80211_hw *hw,
2575 struct ieee80211_if_init_conf *conf)
2576{
2577 struct ath5k_softc *sc = hw->priv;
2578 int ret;
2579
2580 mutex_lock(&sc->lock);
Johannes Berg32bfd352007-12-19 01:31:26 +01002581 if (sc->vif) {
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002582 ret = 0;
2583 goto end;
2584 }
2585
Johannes Berg32bfd352007-12-19 01:31:26 +01002586 sc->vif = conf->vif;
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002587
2588 switch (conf->type) {
2589 case IEEE80211_IF_TYPE_STA:
2590 case IEEE80211_IF_TYPE_IBSS:
2591 case IEEE80211_IF_TYPE_MNTR:
2592 sc->opmode = conf->type;
2593 break;
2594 default:
2595 ret = -EOPNOTSUPP;
2596 goto end;
2597 }
2598 ret = 0;
2599end:
2600 mutex_unlock(&sc->lock);
2601 return ret;
2602}
2603
2604static void
2605ath5k_remove_interface(struct ieee80211_hw *hw,
2606 struct ieee80211_if_init_conf *conf)
2607{
2608 struct ath5k_softc *sc = hw->priv;
2609
2610 mutex_lock(&sc->lock);
Johannes Berg32bfd352007-12-19 01:31:26 +01002611 if (sc->vif != conf->vif)
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002612 goto end;
2613
Johannes Berg32bfd352007-12-19 01:31:26 +01002614 sc->vif = NULL;
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002615end:
2616 mutex_unlock(&sc->lock);
2617}
2618
2619static int
2620ath5k_config(struct ieee80211_hw *hw,
2621 struct ieee80211_conf *conf)
2622{
2623 struct ath5k_softc *sc = hw->priv;
2624
Bruno Randolfe535c1a2008-01-18 21:51:40 +09002625 sc->bintval = conf->beacon_int;
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002626 ath5k_setcurmode(sc, conf->phymode);
2627
2628 return ath5k_chan_set(sc, conf->chan);
2629}
2630
2631static int
Johannes Berg32bfd352007-12-19 01:31:26 +01002632ath5k_config_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002633 struct ieee80211_if_conf *conf)
2634{
2635 struct ath5k_softc *sc = hw->priv;
2636 struct ath5k_hw *ah = sc->ah;
2637 int ret;
2638
2639 /* Set to a reasonable value. Note that this will
2640 * be set to mac80211's value at ath5k_config(). */
Bruno Randolfe535c1a2008-01-18 21:51:40 +09002641 sc->bintval = 1000;
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002642 mutex_lock(&sc->lock);
Johannes Berg32bfd352007-12-19 01:31:26 +01002643 if (sc->vif != vif) {
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002644 ret = -EIO;
2645 goto unlock;
2646 }
2647 if (conf->bssid) {
2648 /* Cache for later use during resets */
2649 memcpy(ah->ah_bssid, conf->bssid, ETH_ALEN);
2650 /* XXX: assoc id is set to 0 for now, mac80211 doesn't have
2651 * a clean way of letting us retrieve this yet. */
2652 ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
2653 }
2654 mutex_unlock(&sc->lock);
2655
2656 return ath5k_reset(hw);
2657unlock:
2658 mutex_unlock(&sc->lock);
2659 return ret;
2660}
2661
2662#define SUPPORTED_FIF_FLAGS \
2663 FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | \
2664 FIF_PLCPFAIL | FIF_CONTROL | FIF_OTHER_BSS | \
2665 FIF_BCN_PRBRESP_PROMISC
2666/*
2667 * o always accept unicast, broadcast, and multicast traffic
2668 * o multicast traffic for all BSSIDs will be enabled if mac80211
2669 * says it should be
2670 * o maintain current state of phy ofdm or phy cck error reception.
2671 * If the hardware detects any of these type of errors then
2672 * ath5k_hw_get_rx_filter() will pass to us the respective
2673 * hardware filters to be able to receive these type of frames.
2674 * o probe request frames are accepted only when operating in
2675 * hostap, adhoc, or monitor modes
2676 * o enable promiscuous mode according to the interface state
2677 * o accept beacons:
2678 * - when operating in adhoc mode so the 802.11 layer creates
2679 * node table entries for peers,
2680 * - when operating in station mode for collecting rssi data when
2681 * the station is otherwise quiet, or
2682 * - when scanning
2683 */
2684static void ath5k_configure_filter(struct ieee80211_hw *hw,
2685 unsigned int changed_flags,
2686 unsigned int *new_flags,
2687 int mc_count, struct dev_mc_list *mclist)
2688{
2689 struct ath5k_softc *sc = hw->priv;
2690 struct ath5k_hw *ah = sc->ah;
2691 u32 mfilt[2], val, rfilt;
2692 u8 pos;
2693 int i;
2694
2695 mfilt[0] = 0;
2696 mfilt[1] = 0;
2697
2698 /* Only deal with supported flags */
2699 changed_flags &= SUPPORTED_FIF_FLAGS;
2700 *new_flags &= SUPPORTED_FIF_FLAGS;
2701
2702 /* If HW detects any phy or radar errors, leave those filters on.
2703 * Also, always enable Unicast, Broadcasts and Multicast
2704 * XXX: move unicast, bssid broadcasts and multicast to mac80211 */
2705 rfilt = (ath5k_hw_get_rx_filter(ah) & (AR5K_RX_FILTER_PHYERR)) |
2706 (AR5K_RX_FILTER_UCAST | AR5K_RX_FILTER_BCAST |
2707 AR5K_RX_FILTER_MCAST);
2708
2709 if (changed_flags & (FIF_PROMISC_IN_BSS | FIF_OTHER_BSS)) {
2710 if (*new_flags & FIF_PROMISC_IN_BSS) {
2711 rfilt |= AR5K_RX_FILTER_PROM;
2712 __set_bit(ATH_STAT_PROMISC, sc->status);
2713 }
2714 else
2715 __clear_bit(ATH_STAT_PROMISC, sc->status);
2716 }
2717
2718 /* Note, AR5K_RX_FILTER_MCAST is already enabled */
2719 if (*new_flags & FIF_ALLMULTI) {
2720 mfilt[0] = ~0;
2721 mfilt[1] = ~0;
2722 } else {
2723 for (i = 0; i < mc_count; i++) {
2724 if (!mclist)
2725 break;
2726 /* calculate XOR of eight 6-bit values */
2727 val = LE_READ_4(mclist->dmi_addr + 0);
2728 pos = (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
2729 val = LE_READ_4(mclist->dmi_addr + 3);
2730 pos ^= (val >> 18) ^ (val >> 12) ^ (val >> 6) ^ val;
2731 pos &= 0x3f;
2732 mfilt[pos / 32] |= (1 << (pos % 32));
2733 /* XXX: we might be able to just do this instead,
2734 * but not sure, needs testing, if we do use this we'd
2735 * neet to inform below to not reset the mcast */
2736 /* ath5k_hw_set_mcast_filterindex(ah,
2737 * mclist->dmi_addr[5]); */
2738 mclist = mclist->next;
2739 }
2740 }
2741
2742 /* This is the best we can do */
2743 if (*new_flags & (FIF_FCSFAIL | FIF_PLCPFAIL))
2744 rfilt |= AR5K_RX_FILTER_PHYERR;
2745
2746 /* FIF_BCN_PRBRESP_PROMISC really means to enable beacons
2747 * and probes for any BSSID, this needs testing */
2748 if (*new_flags & FIF_BCN_PRBRESP_PROMISC)
2749 rfilt |= AR5K_RX_FILTER_BEACON | AR5K_RX_FILTER_PROBEREQ;
2750
2751 /* FIF_CONTROL doc says that if FIF_PROMISC_IN_BSS is not
2752 * set we should only pass on control frames for this
2753 * station. This needs testing. I believe right now this
2754 * enables *all* control frames, which is OK.. but
2755 * but we should see if we can improve on granularity */
2756 if (*new_flags & FIF_CONTROL)
2757 rfilt |= AR5K_RX_FILTER_CONTROL;
2758
2759 /* Additional settings per mode -- this is per ath5k */
2760
2761 /* XXX move these to mac80211, and add a beacon IFF flag to mac80211 */
2762
2763 if (sc->opmode == IEEE80211_IF_TYPE_MNTR)
2764 rfilt |= AR5K_RX_FILTER_CONTROL | AR5K_RX_FILTER_BEACON |
2765 AR5K_RX_FILTER_PROBEREQ | AR5K_RX_FILTER_PROM;
2766 if (sc->opmode != IEEE80211_IF_TYPE_STA)
2767 rfilt |= AR5K_RX_FILTER_PROBEREQ;
2768 if (sc->opmode != IEEE80211_IF_TYPE_AP &&
2769 test_bit(ATH_STAT_PROMISC, sc->status))
2770 rfilt |= AR5K_RX_FILTER_PROM;
2771 if (sc->opmode == IEEE80211_IF_TYPE_STA ||
2772 sc->opmode == IEEE80211_IF_TYPE_IBSS) {
2773 rfilt |= AR5K_RX_FILTER_BEACON;
2774 }
2775
2776 /* Set filters */
2777 ath5k_hw_set_rx_filter(ah,rfilt);
2778
2779 /* Set multicast bits */
2780 ath5k_hw_set_mcast_filter(ah, mfilt[0], mfilt[1]);
2781 /* Set the cached hw filter flags, this will alter actually
2782 * be set in HW */
2783 sc->filter_flags = rfilt;
2784}
2785
2786static int
2787ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
2788 const u8 *local_addr, const u8 *addr,
2789 struct ieee80211_key_conf *key)
2790{
2791 struct ath5k_softc *sc = hw->priv;
2792 int ret = 0;
2793
2794 switch(key->alg) {
2795 case ALG_WEP:
2796 break;
2797 case ALG_TKIP:
2798 case ALG_CCMP:
2799 return -EOPNOTSUPP;
2800 default:
2801 WARN_ON(1);
2802 return -EINVAL;
2803 }
2804
2805 mutex_lock(&sc->lock);
2806
2807 switch (cmd) {
2808 case SET_KEY:
2809 ret = ath5k_hw_set_key(sc->ah, key->keyidx, key, addr);
2810 if (ret) {
2811 ATH5K_ERR(sc, "can't set the key\n");
2812 goto unlock;
2813 }
2814 __set_bit(key->keyidx, sc->keymap);
2815 key->hw_key_idx = key->keyidx;
2816 break;
2817 case DISABLE_KEY:
2818 ath5k_hw_reset_key(sc->ah, key->keyidx);
2819 __clear_bit(key->keyidx, sc->keymap);
2820 break;
2821 default:
2822 ret = -EINVAL;
2823 goto unlock;
2824 }
2825
2826unlock:
2827 mutex_unlock(&sc->lock);
2828 return ret;
2829}
2830
2831static int
2832ath5k_get_stats(struct ieee80211_hw *hw,
2833 struct ieee80211_low_level_stats *stats)
2834{
2835 struct ath5k_softc *sc = hw->priv;
2836
2837 memcpy(stats, &sc->ll_stats, sizeof(sc->ll_stats));
2838
2839 return 0;
2840}
2841
2842static int
2843ath5k_get_tx_stats(struct ieee80211_hw *hw,
2844 struct ieee80211_tx_queue_stats *stats)
2845{
2846 struct ath5k_softc *sc = hw->priv;
2847
2848 memcpy(stats, &sc->tx_stats, sizeof(sc->tx_stats));
2849
2850 return 0;
2851}
2852
2853static u64
2854ath5k_get_tsf(struct ieee80211_hw *hw)
2855{
2856 struct ath5k_softc *sc = hw->priv;
2857
2858 return ath5k_hw_get_tsf64(sc->ah);
2859}
2860
2861static void
2862ath5k_reset_tsf(struct ieee80211_hw *hw)
2863{
2864 struct ath5k_softc *sc = hw->priv;
2865
Bruno Randolf9804b982008-01-19 18:17:59 +09002866 /*
2867 * in IBSS mode we need to update the beacon timers too.
2868 * this will also reset the TSF if we call it with 0
2869 */
2870 if (sc->opmode == IEEE80211_IF_TYPE_IBSS)
2871 ath5k_beacon_update_timers(sc, 0);
2872 else
2873 ath5k_hw_reset_tsf(sc->ah);
Jiri Slabyfa1c1142007-08-12 17:33:16 +02002874}
2875
2876static int
2877ath5k_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
2878 struct ieee80211_tx_control *ctl)
2879{
2880 struct ath5k_softc *sc = hw->priv;
2881 int ret;
2882
2883 ath5k_debug_dump_skb(sc, skb, "BC ", 1);
2884
2885 mutex_lock(&sc->lock);
2886
2887 if (sc->opmode != IEEE80211_IF_TYPE_IBSS) {
2888 ret = -EIO;
2889 goto end;
2890 }
2891
2892 ath5k_txbuf_free(sc, sc->bbuf);
2893 sc->bbuf->skb = skb;
2894 ret = ath5k_beacon_setup(sc, sc->bbuf, ctl);
2895 if (ret)
2896 sc->bbuf->skb = NULL;
2897 else
2898 ath5k_beacon_config(sc);
2899
2900end:
2901 mutex_unlock(&sc->lock);
2902 return ret;
2903}
2904