blob: eeceab39cda22aee81e2fcbb86fc0c9520766a5f [file] [log] [blame]
Vladimir Kondratiev2be7d222012-12-20 13:13:19 -08001/*
2 * Copyright (c) 2012 Qualcomm Atheros, Inc.
3 *
4 * Permission to use, copy, modify, and/or distribute this software for any
5 * purpose with or without fee is hereby granted, provided that the above
6 * copyright notice and this permission notice appear in all copies.
7 *
8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
15 */
16
Vladimir Kondratiev2be7d222012-12-20 13:13:19 -080017#include <linux/module.h>
Vladimir Kondratiev2be7d222012-12-20 13:13:19 -080018#include <linux/debugfs.h>
19#include <linux/pci.h>
20#include <linux/moduleparam.h>
21
22#include "wil6210.h"
23
24static int use_msi = 1;
25module_param(use_msi, int, S_IRUGO);
26MODULE_PARM_DESC(use_msi,
27 " Use MSI interrupt: "
28 "0 - don't, 1 - (default) - single, or 3");
29
30/* Bus ops */
31static int wil_if_pcie_enable(struct wil6210_priv *wil)
32{
33 struct pci_dev *pdev = wil->pdev;
34 int rc;
35
36 pci_set_master(pdev);
37
38 /*
39 * how many MSI interrupts to request?
40 */
41 switch (use_msi) {
42 case 3:
43 case 1:
44 case 0:
45 break;
46 default:
47 wil_err(wil, "Invalid use_msi=%d, default to 1\n",
48 use_msi);
49 use_msi = 1;
50 }
51 wil->n_msi = use_msi;
52 if (wil->n_msi) {
Vladimir Kondratiev77438822013-01-28 18:31:06 +020053 wil_dbg_misc(wil, "Setup %d MSI interrupts\n", use_msi);
Vladimir Kondratiev2be7d222012-12-20 13:13:19 -080054 rc = pci_enable_msi_block(pdev, wil->n_msi);
55 if (rc && (wil->n_msi == 3)) {
56 wil_err(wil, "3 MSI mode failed, try 1 MSI\n");
57 wil->n_msi = 1;
58 rc = pci_enable_msi_block(pdev, wil->n_msi);
59 }
60 if (rc) {
61 wil_err(wil, "pci_enable_msi failed, use INTx\n");
62 wil->n_msi = 0;
63 }
64 } else {
Vladimir Kondratiev77438822013-01-28 18:31:06 +020065 wil_dbg_misc(wil, "MSI interrupts disabled, use INTx\n");
Vladimir Kondratiev2be7d222012-12-20 13:13:19 -080066 }
67
68 rc = wil6210_init_irq(wil, pdev->irq);
69 if (rc)
70 goto stop_master;
71
72 /* need reset here to obtain MAC */
73 rc = wil_reset(wil);
74 if (rc)
75 goto release_irq;
76
77 return 0;
78
79 release_irq:
80 wil6210_fini_irq(wil, pdev->irq);
81 /* safe to call if no MSI */
82 pci_disable_msi(pdev);
83 stop_master:
84 pci_clear_master(pdev);
85 return rc;
86}
87
88static int wil_if_pcie_disable(struct wil6210_priv *wil)
89{
90 struct pci_dev *pdev = wil->pdev;
91
92 pci_clear_master(pdev);
93 /* disable and release IRQ */
94 wil6210_fini_irq(wil, pdev->irq);
95 /* safe to call if no MSI */
96 pci_disable_msi(pdev);
97 /* TODO: disable HW */
98
99 return 0;
100}
101
102static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
103{
104 struct wil6210_priv *wil;
105 struct device *dev = &pdev->dev;
106 void __iomem *csr;
107 int rc;
108
109 /* check HW */
110 dev_info(&pdev->dev, WIL_NAME " device found [%04x:%04x] (rev %x)\n",
111 (int)pdev->vendor, (int)pdev->device, (int)pdev->revision);
112
113 if (pci_resource_len(pdev, 0) != WIL6210_MEM_SIZE) {
114 dev_err(&pdev->dev, "Not " WIL_NAME "? "
115 "BAR0 size is %lu while expecting %lu\n",
116 (ulong)pci_resource_len(pdev, 0), WIL6210_MEM_SIZE);
117 return -ENODEV;
118 }
119
120 rc = pci_enable_device(pdev);
121 if (rc) {
122 dev_err(&pdev->dev, "pci_enable_device failed\n");
123 return -ENODEV;
124 }
125 /* rollback to err_disable_pdev */
126
127 rc = pci_request_region(pdev, 0, WIL_NAME);
128 if (rc) {
129 dev_err(&pdev->dev, "pci_request_region failed\n");
130 goto err_disable_pdev;
131 }
132 /* rollback to err_release_reg */
133
134 csr = pci_ioremap_bar(pdev, 0);
135 if (!csr) {
136 dev_err(&pdev->dev, "pci_ioremap_bar failed\n");
137 rc = -ENODEV;
138 goto err_release_reg;
139 }
140 /* rollback to err_iounmap */
141 dev_info(&pdev->dev, "CSR at %pR -> %p\n", &pdev->resource[0], csr);
142
143 wil = wil_if_alloc(dev, csr);
144 if (IS_ERR(wil)) {
145 rc = (int)PTR_ERR(wil);
146 dev_err(dev, "wil_if_alloc failed: %d\n", rc);
147 goto err_iounmap;
148 }
149 /* rollback to if_free */
150
151 pci_set_drvdata(pdev, wil);
152 wil->pdev = pdev;
153
154 /* FW should raise IRQ when ready */
155 rc = wil_if_pcie_enable(wil);
156 if (rc) {
157 wil_err(wil, "Enable device failed\n");
158 goto if_free;
159 }
160 /* rollback to bus_disable */
161
162 rc = wil_if_add(wil);
163 if (rc) {
164 wil_err(wil, "wil_if_add failed: %d\n", rc);
165 goto bus_disable;
166 }
167
168 wil6210_debugfs_init(wil);
169
170 /* check FW is alive */
171 wmi_echo(wil);
172
173 return 0;
174
175 bus_disable:
176 wil_if_pcie_disable(wil);
177 if_free:
178 wil_if_free(wil);
179 err_iounmap:
180 pci_iounmap(pdev, csr);
181 err_release_reg:
182 pci_release_region(pdev, 0);
183 err_disable_pdev:
184 pci_disable_device(pdev);
185
186 return rc;
187}
188
189static void wil_pcie_remove(struct pci_dev *pdev)
190{
191 struct wil6210_priv *wil = pci_get_drvdata(pdev);
192
193 wil6210_debugfs_remove(wil);
194 wil_if_pcie_disable(wil);
195 wil_if_remove(wil);
196 wil_if_free(wil);
197 pci_iounmap(pdev, wil->csr);
198 pci_release_region(pdev, 0);
199 pci_disable_device(pdev);
Vladimir Kondratiev2be7d222012-12-20 13:13:19 -0800200}
201
202static DEFINE_PCI_DEVICE_TABLE(wil6210_pcie_ids) = {
203 { PCI_DEVICE(0x1ae9, 0x0301) },
204 { /* end: all zeroes */ },
205};
206MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids);
207
208static struct pci_driver wil6210_driver = {
209 .probe = wil_pcie_probe,
210 .remove = wil_pcie_remove,
211 .id_table = wil6210_pcie_ids,
212 .name = WIL_NAME,
213};
214
215module_pci_driver(wil6210_driver);
216
217MODULE_LICENSE("Dual BSD/GPL");
218MODULE_AUTHOR("Qualcomm Atheros <wil6210@qca.qualcomm.com>");
219MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card");