John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 1 | /* |
| 2 | * linux/drivers/pinctrl/pinmux-xway.c |
| 3 | * based on linux/drivers/pinctrl/pinmux-pxa910.c |
| 4 | * |
| 5 | * This program is free software; you can redistribute it and/or modify |
| 6 | * it under the terms of the GNU General Public License version 2 as |
| 7 | * publishhed by the Free Software Foundation. |
| 8 | * |
| 9 | * Copyright (C) 2012 John Crispin <blogic@openwrt.org> |
| 10 | */ |
| 11 | |
Thierry Reding | 9e0c1fb | 2013-01-21 11:09:14 +0100 | [diff] [blame] | 12 | #include <linux/err.h> |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 13 | #include <linux/slab.h> |
| 14 | #include <linux/module.h> |
| 15 | #include <linux/of_platform.h> |
| 16 | #include <linux/of_address.h> |
| 17 | #include <linux/of_gpio.h> |
| 18 | #include <linux/ioport.h> |
| 19 | #include <linux/io.h> |
| 20 | #include <linux/device.h> |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 21 | #include <linux/platform_device.h> |
| 22 | |
| 23 | #include "pinctrl-lantiq.h" |
| 24 | |
| 25 | #include <lantiq_soc.h> |
| 26 | |
| 27 | /* we have 3 1/2 banks of 16 bit each */ |
| 28 | #define PINS 16 |
| 29 | #define PORT3 3 |
| 30 | #define PORT(x) (x / PINS) |
| 31 | #define PORT_PIN(x) (x % PINS) |
| 32 | |
| 33 | /* we have 2 mux bits that can be set for each pin */ |
| 34 | #define MUX_ALT0 0x1 |
| 35 | #define MUX_ALT1 0x2 |
| 36 | |
| 37 | /* |
| 38 | * each bank has this offset apart from the 1/2 bank that is mixed into the |
| 39 | * other 3 ranges |
| 40 | */ |
| 41 | #define REG_OFF 0x30 |
| 42 | |
| 43 | /* these are the offsets to our registers */ |
| 44 | #define GPIO_BASE(p) (REG_OFF * PORT(p)) |
| 45 | #define GPIO_OUT(p) GPIO_BASE(p) |
| 46 | #define GPIO_IN(p) (GPIO_BASE(p) + 0x04) |
| 47 | #define GPIO_DIR(p) (GPIO_BASE(p) + 0x08) |
| 48 | #define GPIO_ALT0(p) (GPIO_BASE(p) + 0x0C) |
| 49 | #define GPIO_ALT1(p) (GPIO_BASE(p) + 0x10) |
| 50 | #define GPIO_OD(p) (GPIO_BASE(p) + 0x14) |
| 51 | #define GPIO_PUDSEL(p) (GPIO_BASE(p) + 0x1c) |
| 52 | #define GPIO_PUDEN(p) (GPIO_BASE(p) + 0x20) |
| 53 | |
| 54 | /* the 1/2 port needs special offsets for some registers */ |
| 55 | #define GPIO3_OD (GPIO_BASE(0) + 0x24) |
| 56 | #define GPIO3_PUDSEL (GPIO_BASE(0) + 0x28) |
| 57 | #define GPIO3_PUDEN (GPIO_BASE(0) + 0x2C) |
| 58 | #define GPIO3_ALT1 (GPIO_BASE(PINS) + 0x24) |
| 59 | |
| 60 | /* macros to help us access the registers */ |
| 61 | #define gpio_getbit(m, r, p) (!!(ltq_r32(m + r) & BIT(p))) |
| 62 | #define gpio_setbit(m, r, p) ltq_w32_mask(0, BIT(p), m + r) |
| 63 | #define gpio_clearbit(m, r, p) ltq_w32_mask(BIT(p), 0, m + r) |
| 64 | |
| 65 | #define MFP_XWAY(a, f0, f1, f2, f3) \ |
| 66 | { \ |
| 67 | .name = #a, \ |
| 68 | .pin = a, \ |
| 69 | .func = { \ |
| 70 | XWAY_MUX_##f0, \ |
| 71 | XWAY_MUX_##f1, \ |
| 72 | XWAY_MUX_##f2, \ |
| 73 | XWAY_MUX_##f3, \ |
| 74 | }, \ |
| 75 | } |
| 76 | |
| 77 | #define GRP_MUX(a, m, p) \ |
| 78 | { .name = a, .mux = XWAY_MUX_##m, .pins = p, .npins = ARRAY_SIZE(p), } |
| 79 | |
| 80 | #define FUNC_MUX(f, m) \ |
| 81 | { .func = f, .mux = XWAY_MUX_##m, } |
| 82 | |
| 83 | #define XWAY_MAX_PIN 32 |
| 84 | #define XR9_MAX_PIN 56 |
| 85 | |
| 86 | enum xway_mux { |
| 87 | XWAY_MUX_GPIO = 0, |
| 88 | XWAY_MUX_SPI, |
| 89 | XWAY_MUX_ASC, |
| 90 | XWAY_MUX_PCI, |
| 91 | XWAY_MUX_CGU, |
| 92 | XWAY_MUX_EBU, |
| 93 | XWAY_MUX_JTAG, |
| 94 | XWAY_MUX_EXIN, |
| 95 | XWAY_MUX_TDM, |
| 96 | XWAY_MUX_STP, |
| 97 | XWAY_MUX_SIN, |
| 98 | XWAY_MUX_GPT, |
| 99 | XWAY_MUX_NMI, |
| 100 | XWAY_MUX_MDIO, |
| 101 | XWAY_MUX_MII, |
| 102 | XWAY_MUX_EPHY, |
| 103 | XWAY_MUX_DFE, |
| 104 | XWAY_MUX_SDIO, |
| 105 | XWAY_MUX_NONE = 0xffff, |
| 106 | }; |
| 107 | |
| 108 | static const struct ltq_mfp_pin xway_mfp[] = { |
| 109 | /* pin f0 f1 f2 f3 */ |
| 110 | MFP_XWAY(GPIO0, GPIO, EXIN, NONE, TDM), |
| 111 | MFP_XWAY(GPIO1, GPIO, EXIN, NONE, NONE), |
| 112 | MFP_XWAY(GPIO2, GPIO, CGU, EXIN, NONE), |
| 113 | MFP_XWAY(GPIO3, GPIO, CGU, NONE, PCI), |
| 114 | MFP_XWAY(GPIO4, GPIO, STP, NONE, ASC), |
| 115 | MFP_XWAY(GPIO5, GPIO, STP, NONE, NONE), |
| 116 | MFP_XWAY(GPIO6, GPIO, STP, GPT, ASC), |
| 117 | MFP_XWAY(GPIO7, GPIO, CGU, PCI, NONE), |
| 118 | MFP_XWAY(GPIO8, GPIO, CGU, NMI, NONE), |
| 119 | MFP_XWAY(GPIO9, GPIO, ASC, SPI, EXIN), |
| 120 | MFP_XWAY(GPIO10, GPIO, ASC, SPI, NONE), |
| 121 | MFP_XWAY(GPIO11, GPIO, ASC, PCI, SPI), |
| 122 | MFP_XWAY(GPIO12, GPIO, ASC, NONE, NONE), |
| 123 | MFP_XWAY(GPIO13, GPIO, EBU, SPI, NONE), |
| 124 | MFP_XWAY(GPIO14, GPIO, CGU, PCI, NONE), |
| 125 | MFP_XWAY(GPIO15, GPIO, SPI, JTAG, NONE), |
| 126 | MFP_XWAY(GPIO16, GPIO, SPI, NONE, JTAG), |
| 127 | MFP_XWAY(GPIO17, GPIO, SPI, NONE, JTAG), |
| 128 | MFP_XWAY(GPIO18, GPIO, SPI, NONE, JTAG), |
| 129 | MFP_XWAY(GPIO19, GPIO, PCI, NONE, NONE), |
| 130 | MFP_XWAY(GPIO20, GPIO, JTAG, NONE, NONE), |
| 131 | MFP_XWAY(GPIO21, GPIO, PCI, EBU, GPT), |
| 132 | MFP_XWAY(GPIO22, GPIO, SPI, NONE, NONE), |
| 133 | MFP_XWAY(GPIO23, GPIO, EBU, PCI, STP), |
| 134 | MFP_XWAY(GPIO24, GPIO, EBU, TDM, PCI), |
| 135 | MFP_XWAY(GPIO25, GPIO, TDM, NONE, ASC), |
| 136 | MFP_XWAY(GPIO26, GPIO, EBU, NONE, TDM), |
| 137 | MFP_XWAY(GPIO27, GPIO, TDM, NONE, ASC), |
| 138 | MFP_XWAY(GPIO28, GPIO, GPT, NONE, NONE), |
| 139 | MFP_XWAY(GPIO29, GPIO, PCI, NONE, NONE), |
| 140 | MFP_XWAY(GPIO30, GPIO, PCI, NONE, NONE), |
| 141 | MFP_XWAY(GPIO31, GPIO, EBU, PCI, NONE), |
| 142 | MFP_XWAY(GPIO32, GPIO, NONE, NONE, EBU), |
| 143 | MFP_XWAY(GPIO33, GPIO, NONE, NONE, EBU), |
| 144 | MFP_XWAY(GPIO34, GPIO, NONE, NONE, EBU), |
| 145 | MFP_XWAY(GPIO35, GPIO, NONE, NONE, EBU), |
| 146 | MFP_XWAY(GPIO36, GPIO, SIN, NONE, EBU), |
| 147 | MFP_XWAY(GPIO37, GPIO, PCI, NONE, NONE), |
| 148 | MFP_XWAY(GPIO38, GPIO, PCI, NONE, NONE), |
| 149 | MFP_XWAY(GPIO39, GPIO, EXIN, NONE, NONE), |
| 150 | MFP_XWAY(GPIO40, GPIO, NONE, NONE, NONE), |
| 151 | MFP_XWAY(GPIO41, GPIO, NONE, NONE, NONE), |
| 152 | MFP_XWAY(GPIO42, GPIO, MDIO, NONE, NONE), |
| 153 | MFP_XWAY(GPIO43, GPIO, MDIO, NONE, NONE), |
| 154 | MFP_XWAY(GPIO44, GPIO, NONE, NONE, SIN), |
| 155 | MFP_XWAY(GPIO45, GPIO, NONE, NONE, SIN), |
| 156 | MFP_XWAY(GPIO46, GPIO, NONE, NONE, EXIN), |
| 157 | MFP_XWAY(GPIO47, GPIO, NONE, NONE, SIN), |
| 158 | MFP_XWAY(GPIO48, GPIO, EBU, NONE, NONE), |
| 159 | MFP_XWAY(GPIO49, GPIO, EBU, NONE, NONE), |
| 160 | MFP_XWAY(GPIO50, GPIO, NONE, NONE, NONE), |
| 161 | MFP_XWAY(GPIO51, GPIO, NONE, NONE, NONE), |
| 162 | MFP_XWAY(GPIO52, GPIO, NONE, NONE, NONE), |
| 163 | MFP_XWAY(GPIO53, GPIO, NONE, NONE, NONE), |
| 164 | MFP_XWAY(GPIO54, GPIO, NONE, NONE, NONE), |
| 165 | MFP_XWAY(GPIO55, GPIO, NONE, NONE, NONE), |
| 166 | }; |
| 167 | |
| 168 | static const struct ltq_mfp_pin ase_mfp[] = { |
| 169 | /* pin f0 f1 f2 f3 */ |
| 170 | MFP_XWAY(GPIO0, GPIO, EXIN, MII, TDM), |
| 171 | MFP_XWAY(GPIO1, GPIO, STP, DFE, EBU), |
| 172 | MFP_XWAY(GPIO2, GPIO, STP, DFE, EPHY), |
| 173 | MFP_XWAY(GPIO3, GPIO, STP, EPHY, EBU), |
| 174 | MFP_XWAY(GPIO4, GPIO, GPT, EPHY, MII), |
| 175 | MFP_XWAY(GPIO5, GPIO, MII, ASC, GPT), |
| 176 | MFP_XWAY(GPIO6, GPIO, MII, ASC, EXIN), |
| 177 | MFP_XWAY(GPIO7, GPIO, SPI, MII, JTAG), |
| 178 | MFP_XWAY(GPIO8, GPIO, SPI, MII, JTAG), |
| 179 | MFP_XWAY(GPIO9, GPIO, SPI, MII, JTAG), |
| 180 | MFP_XWAY(GPIO10, GPIO, SPI, MII, JTAG), |
| 181 | MFP_XWAY(GPIO11, GPIO, EBU, CGU, JTAG), |
| 182 | MFP_XWAY(GPIO12, GPIO, EBU, MII, SDIO), |
| 183 | MFP_XWAY(GPIO13, GPIO, EBU, MII, CGU), |
| 184 | MFP_XWAY(GPIO14, GPIO, EBU, SPI, CGU), |
| 185 | MFP_XWAY(GPIO15, GPIO, EBU, SPI, SDIO), |
| 186 | MFP_XWAY(GPIO16, GPIO, NONE, NONE, NONE), |
| 187 | MFP_XWAY(GPIO17, GPIO, NONE, NONE, NONE), |
| 188 | MFP_XWAY(GPIO18, GPIO, NONE, NONE, NONE), |
| 189 | MFP_XWAY(GPIO19, GPIO, EBU, MII, SDIO), |
| 190 | MFP_XWAY(GPIO20, GPIO, EBU, MII, SDIO), |
| 191 | MFP_XWAY(GPIO21, GPIO, EBU, MII, SDIO), |
| 192 | MFP_XWAY(GPIO22, GPIO, EBU, MII, CGU), |
| 193 | MFP_XWAY(GPIO23, GPIO, EBU, MII, CGU), |
| 194 | MFP_XWAY(GPIO24, GPIO, EBU, NONE, MII), |
| 195 | MFP_XWAY(GPIO25, GPIO, EBU, MII, GPT), |
| 196 | MFP_XWAY(GPIO26, GPIO, EBU, MII, SDIO), |
| 197 | MFP_XWAY(GPIO27, GPIO, EBU, NONE, MII), |
| 198 | MFP_XWAY(GPIO28, GPIO, MII, EBU, SDIO), |
| 199 | MFP_XWAY(GPIO29, GPIO, EBU, MII, EXIN), |
| 200 | MFP_XWAY(GPIO30, GPIO, NONE, NONE, NONE), |
| 201 | MFP_XWAY(GPIO31, GPIO, NONE, NONE, NONE), |
| 202 | }; |
| 203 | |
| 204 | static const unsigned pins_jtag[] = {GPIO15, GPIO16, GPIO17, GPIO19, GPIO35}; |
| 205 | static const unsigned pins_asc0[] = {GPIO11, GPIO12}; |
| 206 | static const unsigned pins_asc0_cts_rts[] = {GPIO9, GPIO10}; |
| 207 | static const unsigned pins_stp[] = {GPIO4, GPIO5, GPIO6}; |
| 208 | static const unsigned pins_nmi[] = {GPIO8}; |
| 209 | static const unsigned pins_mdio[] = {GPIO42, GPIO43}; |
| 210 | |
| 211 | static const unsigned pins_ebu_a24[] = {GPIO13}; |
| 212 | static const unsigned pins_ebu_clk[] = {GPIO21}; |
| 213 | static const unsigned pins_ebu_cs1[] = {GPIO23}; |
| 214 | static const unsigned pins_ebu_a23[] = {GPIO24}; |
| 215 | static const unsigned pins_ebu_wait[] = {GPIO26}; |
| 216 | static const unsigned pins_ebu_a25[] = {GPIO31}; |
| 217 | static const unsigned pins_ebu_rdy[] = {GPIO48}; |
| 218 | static const unsigned pins_ebu_rd[] = {GPIO49}; |
| 219 | |
| 220 | static const unsigned pins_nand_ale[] = {GPIO13}; |
| 221 | static const unsigned pins_nand_cs1[] = {GPIO23}; |
| 222 | static const unsigned pins_nand_cle[] = {GPIO24}; |
| 223 | static const unsigned pins_nand_rdy[] = {GPIO48}; |
| 224 | static const unsigned pins_nand_rd[] = {GPIO49}; |
| 225 | |
| 226 | static const unsigned pins_exin0[] = {GPIO0}; |
| 227 | static const unsigned pins_exin1[] = {GPIO1}; |
| 228 | static const unsigned pins_exin2[] = {GPIO2}; |
| 229 | static const unsigned pins_exin3[] = {GPIO39}; |
| 230 | static const unsigned pins_exin4[] = {GPIO46}; |
| 231 | static const unsigned pins_exin5[] = {GPIO9}; |
| 232 | |
| 233 | static const unsigned pins_spi[] = {GPIO16, GPIO17, GPIO18}; |
| 234 | static const unsigned pins_spi_cs1[] = {GPIO15}; |
| 235 | static const unsigned pins_spi_cs2[] = {GPIO21}; |
| 236 | static const unsigned pins_spi_cs3[] = {GPIO13}; |
| 237 | static const unsigned pins_spi_cs4[] = {GPIO10}; |
| 238 | static const unsigned pins_spi_cs5[] = {GPIO9}; |
| 239 | static const unsigned pins_spi_cs6[] = {GPIO11}; |
| 240 | |
| 241 | static const unsigned pins_gpt1[] = {GPIO28}; |
| 242 | static const unsigned pins_gpt2[] = {GPIO21}; |
| 243 | static const unsigned pins_gpt3[] = {GPIO6}; |
| 244 | |
| 245 | static const unsigned pins_clkout0[] = {GPIO8}; |
| 246 | static const unsigned pins_clkout1[] = {GPIO7}; |
| 247 | static const unsigned pins_clkout2[] = {GPIO3}; |
| 248 | static const unsigned pins_clkout3[] = {GPIO2}; |
| 249 | |
| 250 | static const unsigned pins_pci_gnt1[] = {GPIO30}; |
| 251 | static const unsigned pins_pci_gnt2[] = {GPIO23}; |
| 252 | static const unsigned pins_pci_gnt3[] = {GPIO19}; |
| 253 | static const unsigned pins_pci_gnt4[] = {GPIO38}; |
| 254 | static const unsigned pins_pci_req1[] = {GPIO29}; |
| 255 | static const unsigned pins_pci_req2[] = {GPIO31}; |
| 256 | static const unsigned pins_pci_req3[] = {GPIO3}; |
| 257 | static const unsigned pins_pci_req4[] = {GPIO37}; |
| 258 | |
| 259 | static const unsigned ase_pins_jtag[] = {GPIO7, GPIO8, GPIO9, GPIO10, GPIO11}; |
| 260 | static const unsigned ase_pins_asc[] = {GPIO5, GPIO6}; |
| 261 | static const unsigned ase_pins_stp[] = {GPIO1, GPIO2, GPIO3}; |
| 262 | static const unsigned ase_pins_ephy[] = {GPIO2, GPIO3, GPIO4}; |
| 263 | static const unsigned ase_pins_dfe[] = {GPIO1, GPIO2}; |
| 264 | |
| 265 | static const unsigned ase_pins_spi[] = {GPIO8, GPIO9, GPIO10}; |
| 266 | static const unsigned ase_pins_spi_cs1[] = {GPIO7}; |
| 267 | static const unsigned ase_pins_spi_cs2[] = {GPIO15}; |
| 268 | static const unsigned ase_pins_spi_cs3[] = {GPIO14}; |
| 269 | |
| 270 | static const unsigned ase_pins_exin0[] = {GPIO6}; |
| 271 | static const unsigned ase_pins_exin1[] = {GPIO29}; |
| 272 | static const unsigned ase_pins_exin2[] = {GPIO0}; |
| 273 | |
| 274 | static const unsigned ase_pins_gpt1[] = {GPIO5}; |
| 275 | static const unsigned ase_pins_gpt2[] = {GPIO4}; |
| 276 | static const unsigned ase_pins_gpt3[] = {GPIO25}; |
| 277 | |
| 278 | static const struct ltq_pin_group xway_grps[] = { |
| 279 | GRP_MUX("exin0", EXIN, pins_exin0), |
| 280 | GRP_MUX("exin1", EXIN, pins_exin1), |
| 281 | GRP_MUX("exin2", EXIN, pins_exin2), |
| 282 | GRP_MUX("jtag", JTAG, pins_jtag), |
| 283 | GRP_MUX("ebu a23", EBU, pins_ebu_a23), |
| 284 | GRP_MUX("ebu a24", EBU, pins_ebu_a24), |
| 285 | GRP_MUX("ebu a25", EBU, pins_ebu_a25), |
| 286 | GRP_MUX("ebu clk", EBU, pins_ebu_clk), |
| 287 | GRP_MUX("ebu cs1", EBU, pins_ebu_cs1), |
| 288 | GRP_MUX("ebu wait", EBU, pins_ebu_wait), |
| 289 | GRP_MUX("nand ale", EBU, pins_nand_ale), |
| 290 | GRP_MUX("nand cs1", EBU, pins_nand_cs1), |
| 291 | GRP_MUX("nand cle", EBU, pins_nand_cle), |
| 292 | GRP_MUX("spi", SPI, pins_spi), |
| 293 | GRP_MUX("spi_cs1", SPI, pins_spi_cs1), |
| 294 | GRP_MUX("spi_cs2", SPI, pins_spi_cs2), |
| 295 | GRP_MUX("spi_cs3", SPI, pins_spi_cs3), |
| 296 | GRP_MUX("spi_cs4", SPI, pins_spi_cs4), |
| 297 | GRP_MUX("spi_cs5", SPI, pins_spi_cs5), |
| 298 | GRP_MUX("spi_cs6", SPI, pins_spi_cs6), |
| 299 | GRP_MUX("asc0", ASC, pins_asc0), |
| 300 | GRP_MUX("asc0 cts rts", ASC, pins_asc0_cts_rts), |
| 301 | GRP_MUX("stp", STP, pins_stp), |
| 302 | GRP_MUX("nmi", NMI, pins_nmi), |
| 303 | GRP_MUX("gpt1", GPT, pins_gpt1), |
| 304 | GRP_MUX("gpt2", GPT, pins_gpt2), |
| 305 | GRP_MUX("gpt3", GPT, pins_gpt3), |
| 306 | GRP_MUX("clkout0", CGU, pins_clkout0), |
| 307 | GRP_MUX("clkout1", CGU, pins_clkout1), |
| 308 | GRP_MUX("clkout2", CGU, pins_clkout2), |
| 309 | GRP_MUX("clkout3", CGU, pins_clkout3), |
| 310 | GRP_MUX("gnt1", PCI, pins_pci_gnt1), |
| 311 | GRP_MUX("gnt2", PCI, pins_pci_gnt2), |
| 312 | GRP_MUX("gnt3", PCI, pins_pci_gnt3), |
| 313 | GRP_MUX("req1", PCI, pins_pci_req1), |
| 314 | GRP_MUX("req2", PCI, pins_pci_req2), |
| 315 | GRP_MUX("req3", PCI, pins_pci_req3), |
| 316 | /* xrx only */ |
| 317 | GRP_MUX("nand rdy", EBU, pins_nand_rdy), |
| 318 | GRP_MUX("nand rd", EBU, pins_nand_rd), |
| 319 | GRP_MUX("exin3", EXIN, pins_exin3), |
| 320 | GRP_MUX("exin4", EXIN, pins_exin4), |
| 321 | GRP_MUX("exin5", EXIN, pins_exin5), |
| 322 | GRP_MUX("gnt4", PCI, pins_pci_gnt4), |
| 323 | GRP_MUX("req4", PCI, pins_pci_gnt4), |
| 324 | GRP_MUX("mdio", MDIO, pins_mdio), |
| 325 | }; |
| 326 | |
| 327 | static const struct ltq_pin_group ase_grps[] = { |
| 328 | GRP_MUX("exin0", EXIN, ase_pins_exin0), |
| 329 | GRP_MUX("exin1", EXIN, ase_pins_exin1), |
| 330 | GRP_MUX("exin2", EXIN, ase_pins_exin2), |
| 331 | GRP_MUX("jtag", JTAG, ase_pins_jtag), |
| 332 | GRP_MUX("stp", STP, ase_pins_stp), |
| 333 | GRP_MUX("asc", ASC, ase_pins_asc), |
| 334 | GRP_MUX("gpt1", GPT, ase_pins_gpt1), |
| 335 | GRP_MUX("gpt2", GPT, ase_pins_gpt2), |
| 336 | GRP_MUX("gpt3", GPT, ase_pins_gpt3), |
| 337 | GRP_MUX("ephy", EPHY, ase_pins_ephy), |
| 338 | GRP_MUX("dfe", DFE, ase_pins_dfe), |
| 339 | GRP_MUX("spi", SPI, ase_pins_spi), |
| 340 | GRP_MUX("spi_cs1", SPI, ase_pins_spi_cs1), |
| 341 | GRP_MUX("spi_cs2", SPI, ase_pins_spi_cs2), |
| 342 | GRP_MUX("spi_cs3", SPI, ase_pins_spi_cs3), |
| 343 | }; |
| 344 | |
| 345 | static const char * const xway_pci_grps[] = {"gnt1", "gnt2", |
| 346 | "gnt3", "req1", |
| 347 | "req2", "req3"}; |
| 348 | static const char * const xway_spi_grps[] = {"spi", "spi_cs1", |
| 349 | "spi_cs2", "spi_cs3", |
| 350 | "spi_cs4", "spi_cs5", |
| 351 | "spi_cs6"}; |
| 352 | static const char * const xway_cgu_grps[] = {"clkout0", "clkout1", |
| 353 | "clkout2", "clkout3"}; |
| 354 | static const char * const xway_ebu_grps[] = {"ebu a23", "ebu a24", |
| 355 | "ebu a25", "ebu cs1", |
| 356 | "ebu wait", "ebu clk", |
| 357 | "nand ale", "nand cs1", |
| 358 | "nand cle"}; |
| 359 | static const char * const xway_exin_grps[] = {"exin0", "exin1", "exin2"}; |
| 360 | static const char * const xway_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; |
| 361 | static const char * const xway_asc_grps[] = {"asc0", "asc0 cts rts"}; |
| 362 | static const char * const xway_jtag_grps[] = {"jtag"}; |
| 363 | static const char * const xway_stp_grps[] = {"stp"}; |
| 364 | static const char * const xway_nmi_grps[] = {"nmi"}; |
| 365 | |
| 366 | /* ar9/vr9/gr9 */ |
| 367 | static const char * const xrx_mdio_grps[] = {"mdio"}; |
| 368 | static const char * const xrx_ebu_grps[] = {"ebu a23", "ebu a24", |
| 369 | "ebu a25", "ebu cs1", |
| 370 | "ebu wait", "ebu clk", |
| 371 | "nand ale", "nand cs1", |
| 372 | "nand cle", "nand rdy", |
| 373 | "nand rd"}; |
| 374 | static const char * const xrx_exin_grps[] = {"exin0", "exin1", "exin2", |
| 375 | "exin3", "exin4", "exin5"}; |
| 376 | static const char * const xrx_pci_grps[] = {"gnt1", "gnt2", |
| 377 | "gnt3", "gnt4", |
| 378 | "req1", "req2", |
| 379 | "req3", "req4"}; |
| 380 | |
| 381 | /* ase */ |
| 382 | static const char * const ase_exin_grps[] = {"exin0", "exin1", "exin2"}; |
| 383 | static const char * const ase_gpt_grps[] = {"gpt1", "gpt2", "gpt3"}; |
| 384 | static const char * const ase_dfe_grps[] = {"dfe"}; |
| 385 | static const char * const ase_ephy_grps[] = {"ephy"}; |
| 386 | static const char * const ase_asc_grps[] = {"asc"}; |
| 387 | static const char * const ase_jtag_grps[] = {"jtag"}; |
| 388 | static const char * const ase_stp_grps[] = {"stp"}; |
| 389 | static const char * const ase_spi_grps[] = {"spi", "spi_cs1", |
| 390 | "spi_cs2", "spi_cs3"}; |
| 391 | |
| 392 | static const struct ltq_pmx_func danube_funcs[] = { |
| 393 | {"spi", ARRAY_AND_SIZE(xway_spi_grps)}, |
| 394 | {"asc", ARRAY_AND_SIZE(xway_asc_grps)}, |
| 395 | {"cgu", ARRAY_AND_SIZE(xway_cgu_grps)}, |
| 396 | {"jtag", ARRAY_AND_SIZE(xway_jtag_grps)}, |
| 397 | {"exin", ARRAY_AND_SIZE(xway_exin_grps)}, |
| 398 | {"stp", ARRAY_AND_SIZE(xway_stp_grps)}, |
| 399 | {"gpt", ARRAY_AND_SIZE(xway_gpt_grps)}, |
| 400 | {"nmi", ARRAY_AND_SIZE(xway_nmi_grps)}, |
| 401 | {"pci", ARRAY_AND_SIZE(xway_pci_grps)}, |
| 402 | {"ebu", ARRAY_AND_SIZE(xway_ebu_grps)}, |
| 403 | }; |
| 404 | |
| 405 | static const struct ltq_pmx_func xrx_funcs[] = { |
| 406 | {"spi", ARRAY_AND_SIZE(xway_spi_grps)}, |
| 407 | {"asc", ARRAY_AND_SIZE(xway_asc_grps)}, |
| 408 | {"cgu", ARRAY_AND_SIZE(xway_cgu_grps)}, |
| 409 | {"jtag", ARRAY_AND_SIZE(xway_jtag_grps)}, |
| 410 | {"exin", ARRAY_AND_SIZE(xrx_exin_grps)}, |
| 411 | {"stp", ARRAY_AND_SIZE(xway_stp_grps)}, |
| 412 | {"gpt", ARRAY_AND_SIZE(xway_gpt_grps)}, |
| 413 | {"nmi", ARRAY_AND_SIZE(xway_nmi_grps)}, |
| 414 | {"pci", ARRAY_AND_SIZE(xrx_pci_grps)}, |
| 415 | {"ebu", ARRAY_AND_SIZE(xrx_ebu_grps)}, |
| 416 | {"mdio", ARRAY_AND_SIZE(xrx_mdio_grps)}, |
| 417 | }; |
| 418 | |
| 419 | static const struct ltq_pmx_func ase_funcs[] = { |
| 420 | {"spi", ARRAY_AND_SIZE(ase_spi_grps)}, |
| 421 | {"asc", ARRAY_AND_SIZE(ase_asc_grps)}, |
| 422 | {"jtag", ARRAY_AND_SIZE(ase_jtag_grps)}, |
| 423 | {"exin", ARRAY_AND_SIZE(ase_exin_grps)}, |
| 424 | {"stp", ARRAY_AND_SIZE(ase_stp_grps)}, |
| 425 | {"gpt", ARRAY_AND_SIZE(ase_gpt_grps)}, |
| 426 | {"ephy", ARRAY_AND_SIZE(ase_ephy_grps)}, |
| 427 | {"dfe", ARRAY_AND_SIZE(ase_dfe_grps)}, |
| 428 | }; |
| 429 | |
| 430 | /* --------- pinconf related code --------- */ |
| 431 | static int xway_pinconf_get(struct pinctrl_dev *pctldev, |
| 432 | unsigned pin, |
| 433 | unsigned long *config) |
| 434 | { |
| 435 | struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); |
| 436 | enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(*config); |
| 437 | int port = PORT(pin); |
| 438 | u32 reg; |
| 439 | |
| 440 | switch (param) { |
| 441 | case LTQ_PINCONF_PARAM_OPEN_DRAIN: |
| 442 | if (port == PORT3) |
| 443 | reg = GPIO3_OD; |
| 444 | else |
John Crispin | 362ba3c | 2013-02-01 13:04:55 +0100 | [diff] [blame] | 445 | reg = GPIO_OD(pin); |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 446 | *config = LTQ_PINCONF_PACK(param, |
John Crispin | 7541083 | 2013-02-01 13:04:56 +0100 | [diff] [blame] | 447 | !gpio_getbit(info->membase[0], reg, PORT_PIN(pin))); |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 448 | break; |
| 449 | |
| 450 | case LTQ_PINCONF_PARAM_PULL: |
| 451 | if (port == PORT3) |
| 452 | reg = GPIO3_PUDEN; |
| 453 | else |
John Crispin | 362ba3c | 2013-02-01 13:04:55 +0100 | [diff] [blame] | 454 | reg = GPIO_PUDEN(pin); |
| 455 | if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))) { |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 456 | *config = LTQ_PINCONF_PACK(param, 0); |
| 457 | break; |
| 458 | } |
| 459 | |
| 460 | if (port == PORT3) |
| 461 | reg = GPIO3_PUDSEL; |
| 462 | else |
John Crispin | 362ba3c | 2013-02-01 13:04:55 +0100 | [diff] [blame] | 463 | reg = GPIO_PUDSEL(pin); |
| 464 | if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))) |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 465 | *config = LTQ_PINCONF_PACK(param, 2); |
| 466 | else |
| 467 | *config = LTQ_PINCONF_PACK(param, 1); |
| 468 | break; |
| 469 | |
John Crispin | 6360350 | 2013-02-01 13:04:58 +0100 | [diff] [blame] | 470 | case LTQ_PINCONF_PARAM_OUTPUT: |
| 471 | reg = GPIO_DIR(pin); |
| 472 | *config = LTQ_PINCONF_PACK(param, |
| 473 | gpio_getbit(info->membase[0], reg, PORT_PIN(pin))); |
| 474 | break; |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 475 | default: |
| 476 | dev_err(pctldev->dev, "Invalid config param %04x\n", param); |
| 477 | return -ENOTSUPP; |
| 478 | } |
| 479 | return 0; |
| 480 | } |
| 481 | |
| 482 | static int xway_pinconf_set(struct pinctrl_dev *pctldev, |
| 483 | unsigned pin, |
| 484 | unsigned long config) |
| 485 | { |
| 486 | struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); |
| 487 | enum ltq_pinconf_param param = LTQ_PINCONF_UNPACK_PARAM(config); |
| 488 | int arg = LTQ_PINCONF_UNPACK_ARG(config); |
| 489 | int port = PORT(pin); |
| 490 | u32 reg; |
| 491 | |
| 492 | switch (param) { |
| 493 | case LTQ_PINCONF_PARAM_OPEN_DRAIN: |
| 494 | if (port == PORT3) |
| 495 | reg = GPIO3_OD; |
| 496 | else |
John Crispin | 362ba3c | 2013-02-01 13:04:55 +0100 | [diff] [blame] | 497 | reg = GPIO_OD(pin); |
John Crispin | 9338628 | 2013-02-01 13:04:59 +0100 | [diff] [blame] | 498 | if (arg == 0) |
| 499 | gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); |
| 500 | else |
| 501 | gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 502 | break; |
| 503 | |
| 504 | case LTQ_PINCONF_PARAM_PULL: |
| 505 | if (port == PORT3) |
| 506 | reg = GPIO3_PUDEN; |
| 507 | else |
John Crispin | 362ba3c | 2013-02-01 13:04:55 +0100 | [diff] [blame] | 508 | reg = GPIO_PUDEN(pin); |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 509 | if (arg == 0) { |
John Crispin | 362ba3c | 2013-02-01 13:04:55 +0100 | [diff] [blame] | 510 | gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 511 | break; |
| 512 | } |
John Crispin | 362ba3c | 2013-02-01 13:04:55 +0100 | [diff] [blame] | 513 | gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 514 | |
| 515 | if (port == PORT3) |
| 516 | reg = GPIO3_PUDSEL; |
| 517 | else |
John Crispin | 362ba3c | 2013-02-01 13:04:55 +0100 | [diff] [blame] | 518 | reg = GPIO_PUDSEL(pin); |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 519 | if (arg == 1) |
John Crispin | 362ba3c | 2013-02-01 13:04:55 +0100 | [diff] [blame] | 520 | gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 521 | else if (arg == 2) |
John Crispin | 362ba3c | 2013-02-01 13:04:55 +0100 | [diff] [blame] | 522 | gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 523 | else |
| 524 | dev_err(pctldev->dev, "Invalid pull value %d\n", arg); |
| 525 | break; |
| 526 | |
John Crispin | 6360350 | 2013-02-01 13:04:58 +0100 | [diff] [blame] | 527 | case LTQ_PINCONF_PARAM_OUTPUT: |
| 528 | reg = GPIO_DIR(pin); |
| 529 | if (arg == 0) |
| 530 | gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); |
| 531 | else |
| 532 | gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); |
| 533 | break; |
| 534 | |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 535 | default: |
| 536 | dev_err(pctldev->dev, "Invalid config param %04x\n", param); |
| 537 | return -ENOTSUPP; |
| 538 | } |
| 539 | return 0; |
| 540 | } |
| 541 | |
John Crispin | 3a6b04c | 2013-02-01 13:04:57 +0100 | [diff] [blame] | 542 | int xway_pinconf_group_set(struct pinctrl_dev *pctldev, |
| 543 | unsigned selector, |
| 544 | unsigned long config) |
| 545 | { |
| 546 | struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); |
| 547 | int i, ret = 0; |
| 548 | |
| 549 | for (i = 0; i < info->grps[selector].npins && !ret; i++) |
| 550 | ret = xway_pinconf_set(pctldev, |
| 551 | info->grps[selector].pins[i], config); |
| 552 | |
| 553 | return ret; |
| 554 | } |
| 555 | |
Laurent Pinchart | 022ab14 | 2013-02-16 10:25:07 +0100 | [diff] [blame] | 556 | static const struct pinconf_ops xway_pinconf_ops = { |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 557 | .pin_config_get = xway_pinconf_get, |
| 558 | .pin_config_set = xway_pinconf_set, |
John Crispin | 3a6b04c | 2013-02-01 13:04:57 +0100 | [diff] [blame] | 559 | .pin_config_group_set = xway_pinconf_group_set, |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 560 | }; |
| 561 | |
| 562 | static struct pinctrl_desc xway_pctrl_desc = { |
| 563 | .owner = THIS_MODULE, |
| 564 | .confops = &xway_pinconf_ops, |
| 565 | }; |
| 566 | |
| 567 | static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, |
| 568 | int pin, int mux) |
| 569 | { |
| 570 | struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); |
| 571 | int port = PORT(pin); |
| 572 | u32 alt1_reg = GPIO_ALT1(pin); |
| 573 | |
| 574 | if (port == PORT3) |
| 575 | alt1_reg = GPIO3_ALT1; |
| 576 | |
| 577 | if (mux & MUX_ALT0) |
| 578 | gpio_setbit(info->membase[0], GPIO_ALT0(pin), PORT_PIN(pin)); |
| 579 | else |
| 580 | gpio_clearbit(info->membase[0], GPIO_ALT0(pin), PORT_PIN(pin)); |
| 581 | |
| 582 | if (mux & MUX_ALT1) |
| 583 | gpio_setbit(info->membase[0], alt1_reg, PORT_PIN(pin)); |
| 584 | else |
| 585 | gpio_clearbit(info->membase[0], alt1_reg, PORT_PIN(pin)); |
| 586 | |
| 587 | return 0; |
| 588 | } |
| 589 | |
| 590 | static const struct ltq_cfg_param xway_cfg_params[] = { |
| 591 | {"lantiq,pull", LTQ_PINCONF_PARAM_PULL}, |
| 592 | {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN}, |
John Crispin | 6360350 | 2013-02-01 13:04:58 +0100 | [diff] [blame] | 593 | {"lantiq,output", LTQ_PINCONF_PARAM_OUTPUT}, |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 594 | }; |
| 595 | |
| 596 | static struct ltq_pinmux_info xway_info = { |
| 597 | .desc = &xway_pctrl_desc, |
| 598 | .apply_mux = xway_mux_apply, |
| 599 | .params = xway_cfg_params, |
| 600 | .num_params = ARRAY_SIZE(xway_cfg_params), |
| 601 | }; |
| 602 | |
| 603 | /* --------- gpio_chip related code --------- */ |
| 604 | static void xway_gpio_set(struct gpio_chip *chip, unsigned int pin, int val) |
| 605 | { |
| 606 | struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); |
| 607 | |
| 608 | if (val) |
| 609 | gpio_setbit(info->membase[0], GPIO_OUT(pin), PORT_PIN(pin)); |
| 610 | else |
| 611 | gpio_clearbit(info->membase[0], GPIO_OUT(pin), PORT_PIN(pin)); |
| 612 | } |
| 613 | |
| 614 | static int xway_gpio_get(struct gpio_chip *chip, unsigned int pin) |
| 615 | { |
| 616 | struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); |
| 617 | |
| 618 | return gpio_getbit(info->membase[0], GPIO_IN(pin), PORT_PIN(pin)); |
| 619 | } |
| 620 | |
| 621 | static int xway_gpio_dir_in(struct gpio_chip *chip, unsigned int pin) |
| 622 | { |
| 623 | struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); |
| 624 | |
| 625 | gpio_clearbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin)); |
| 626 | |
| 627 | return 0; |
| 628 | } |
| 629 | |
| 630 | static int xway_gpio_dir_out(struct gpio_chip *chip, unsigned int pin, int val) |
| 631 | { |
| 632 | struct ltq_pinmux_info *info = dev_get_drvdata(chip->dev); |
| 633 | |
| 634 | gpio_setbit(info->membase[0], GPIO_DIR(pin), PORT_PIN(pin)); |
| 635 | xway_gpio_set(chip, pin, val); |
| 636 | |
| 637 | return 0; |
| 638 | } |
| 639 | |
| 640 | static int xway_gpio_req(struct gpio_chip *chip, unsigned offset) |
| 641 | { |
| 642 | int gpio = chip->base + offset; |
| 643 | |
| 644 | return pinctrl_request_gpio(gpio); |
| 645 | } |
| 646 | |
| 647 | static void xway_gpio_free(struct gpio_chip *chip, unsigned offset) |
| 648 | { |
| 649 | int gpio = chip->base + offset; |
| 650 | |
| 651 | pinctrl_free_gpio(gpio); |
| 652 | } |
| 653 | |
| 654 | static struct gpio_chip xway_chip = { |
| 655 | .label = "gpio-xway", |
| 656 | .direction_input = xway_gpio_dir_in, |
| 657 | .direction_output = xway_gpio_dir_out, |
| 658 | .get = xway_gpio_get, |
| 659 | .set = xway_gpio_set, |
| 660 | .request = xway_gpio_req, |
| 661 | .free = xway_gpio_free, |
| 662 | .base = -1, |
| 663 | }; |
| 664 | |
| 665 | |
| 666 | /* --------- register the pinctrl layer --------- */ |
| 667 | static const unsigned xway_exin_pin_map[] = {GPIO0, GPIO1, GPIO2, GPIO39, GPIO46, GPIO9}; |
| 668 | static const unsigned ase_exin_pins_map[] = {GPIO6, GPIO29, GPIO0}; |
| 669 | |
| 670 | static struct pinctrl_xway_soc { |
| 671 | int pin_count; |
| 672 | const struct ltq_mfp_pin *mfp; |
| 673 | const struct ltq_pin_group *grps; |
| 674 | unsigned int num_grps; |
| 675 | const struct ltq_pmx_func *funcs; |
| 676 | unsigned int num_funcs; |
| 677 | const unsigned *exin; |
| 678 | unsigned int num_exin; |
| 679 | } soc_cfg[] = { |
| 680 | /* legacy xway */ |
| 681 | {XWAY_MAX_PIN, xway_mfp, |
| 682 | xway_grps, ARRAY_SIZE(xway_grps), |
| 683 | danube_funcs, ARRAY_SIZE(danube_funcs), |
| 684 | xway_exin_pin_map, 3}, |
| 685 | /* xway xr9 series */ |
| 686 | {XR9_MAX_PIN, xway_mfp, |
| 687 | xway_grps, ARRAY_SIZE(xway_grps), |
| 688 | xrx_funcs, ARRAY_SIZE(xrx_funcs), |
| 689 | xway_exin_pin_map, 6}, |
| 690 | /* xway ase series */ |
| 691 | {XWAY_MAX_PIN, ase_mfp, |
| 692 | ase_grps, ARRAY_SIZE(ase_grps), |
| 693 | ase_funcs, ARRAY_SIZE(ase_funcs), |
| 694 | ase_exin_pins_map, 3}, |
| 695 | }; |
| 696 | |
| 697 | static struct pinctrl_gpio_range xway_gpio_range = { |
| 698 | .name = "XWAY GPIO", |
| 699 | .gc = &xway_chip, |
| 700 | }; |
| 701 | |
| 702 | static const struct of_device_id xway_match[] = { |
| 703 | { .compatible = "lantiq,pinctrl-xway", .data = &soc_cfg[0]}, |
| 704 | { .compatible = "lantiq,pinctrl-xr9", .data = &soc_cfg[1]}, |
| 705 | { .compatible = "lantiq,pinctrl-ase", .data = &soc_cfg[2]}, |
| 706 | {}, |
| 707 | }; |
| 708 | MODULE_DEVICE_TABLE(of, xway_match); |
| 709 | |
Greg Kroah-Hartman | 150632b | 2012-12-21 13:10:23 -0800 | [diff] [blame] | 710 | static int pinmux_xway_probe(struct platform_device *pdev) |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 711 | { |
| 712 | const struct of_device_id *match; |
| 713 | const struct pinctrl_xway_soc *xway_soc; |
| 714 | struct resource *res; |
| 715 | int ret, i; |
| 716 | |
| 717 | /* get and remap our register range */ |
| 718 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
Thierry Reding | 9e0c1fb | 2013-01-21 11:09:14 +0100 | [diff] [blame] | 719 | xway_info.membase[0] = devm_ioremap_resource(&pdev->dev, res); |
| 720 | if (IS_ERR(xway_info.membase[0])) |
| 721 | return PTR_ERR(xway_info.membase[0]); |
John Crispin | 3f8c50c | 2012-08-28 12:44:59 +0200 | [diff] [blame] | 722 | |
| 723 | match = of_match_device(xway_match, &pdev->dev); |
| 724 | if (match) |
| 725 | xway_soc = (const struct pinctrl_xway_soc *) match->data; |
| 726 | else |
| 727 | xway_soc = &soc_cfg[0]; |
| 728 | |
| 729 | /* find out how many pads we have */ |
| 730 | xway_chip.ngpio = xway_soc->pin_count; |
| 731 | |
| 732 | /* load our pad descriptors */ |
| 733 | xway_info.pads = devm_kzalloc(&pdev->dev, |
| 734 | sizeof(struct pinctrl_pin_desc) * xway_chip.ngpio, |
| 735 | GFP_KERNEL); |
| 736 | if (!xway_info.pads) { |
| 737 | dev_err(&pdev->dev, "Failed to allocate pads\n"); |
| 738 | return -ENOMEM; |
| 739 | } |
| 740 | for (i = 0; i < xway_chip.ngpio; i++) { |
| 741 | /* strlen("ioXY") + 1 = 5 */ |
| 742 | char *name = devm_kzalloc(&pdev->dev, 5, GFP_KERNEL); |
| 743 | |
| 744 | if (!name) { |
| 745 | dev_err(&pdev->dev, "Failed to allocate pad name\n"); |
| 746 | return -ENOMEM; |
| 747 | } |
| 748 | snprintf(name, 5, "io%d", i); |
| 749 | xway_info.pads[i].number = GPIO0 + i; |
| 750 | xway_info.pads[i].name = name; |
| 751 | } |
| 752 | xway_pctrl_desc.pins = xway_info.pads; |
| 753 | |
| 754 | /* load the gpio chip */ |
| 755 | xway_chip.dev = &pdev->dev; |
| 756 | of_gpiochip_add(&xway_chip); |
| 757 | ret = gpiochip_add(&xway_chip); |
| 758 | if (ret) { |
| 759 | dev_err(&pdev->dev, "Failed to register gpio chip\n"); |
| 760 | return ret; |
| 761 | } |
| 762 | |
| 763 | /* setup the data needed by pinctrl */ |
| 764 | xway_pctrl_desc.name = dev_name(&pdev->dev); |
| 765 | xway_pctrl_desc.npins = xway_chip.ngpio; |
| 766 | |
| 767 | xway_info.num_pads = xway_chip.ngpio; |
| 768 | xway_info.num_mfp = xway_chip.ngpio; |
| 769 | xway_info.mfp = xway_soc->mfp; |
| 770 | xway_info.grps = xway_soc->grps; |
| 771 | xway_info.num_grps = xway_soc->num_grps; |
| 772 | xway_info.funcs = xway_soc->funcs; |
| 773 | xway_info.num_funcs = xway_soc->num_funcs; |
| 774 | xway_info.exin = xway_soc->exin; |
| 775 | xway_info.num_exin = xway_soc->num_exin; |
| 776 | |
| 777 | /* register with the generic lantiq layer */ |
| 778 | ret = ltq_pinctrl_register(pdev, &xway_info); |
| 779 | if (ret) { |
| 780 | dev_err(&pdev->dev, "Failed to register pinctrl driver\n"); |
| 781 | return ret; |
| 782 | } |
| 783 | |
| 784 | /* finish with registering the gpio range in pinctrl */ |
| 785 | xway_gpio_range.npins = xway_chip.ngpio; |
| 786 | xway_gpio_range.base = xway_chip.base; |
| 787 | pinctrl_add_gpio_range(xway_info.pctrl, &xway_gpio_range); |
| 788 | dev_info(&pdev->dev, "Init done\n"); |
| 789 | return 0; |
| 790 | } |
| 791 | |
| 792 | static struct platform_driver pinmux_xway_driver = { |
| 793 | .probe = pinmux_xway_probe, |
| 794 | .driver = { |
| 795 | .name = "pinctrl-xway", |
| 796 | .owner = THIS_MODULE, |
| 797 | .of_match_table = xway_match, |
| 798 | }, |
| 799 | }; |
| 800 | |
| 801 | static int __init pinmux_xway_init(void) |
| 802 | { |
| 803 | return platform_driver_register(&pinmux_xway_driver); |
| 804 | } |
| 805 | |
| 806 | core_initcall_sync(pinmux_xway_init); |