Clément Perrochaud | 6be8867 | 2015-03-09 11:12:05 +0100 | [diff] [blame] | 1 | /* |
| 2 | * I2C link layer for the NXP NCI driver |
| 3 | * |
| 4 | * Copyright (C) 2014 NXP Semiconductors All rights reserved. |
Oleg Zhurakivskyy | 551e306 | 2015-05-25 13:55:13 +0300 | [diff] [blame] | 5 | * Copyright (C) 2012-2015 Intel Corporation. All rights reserved. |
Clément Perrochaud | 6be8867 | 2015-03-09 11:12:05 +0100 | [diff] [blame] | 6 | * |
| 7 | * Authors: Clément Perrochaud <clement.perrochaud@nxp.com> |
Oleg Zhurakivskyy | 551e306 | 2015-05-25 13:55:13 +0300 | [diff] [blame] | 8 | * Authors: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com> |
Clément Perrochaud | 6be8867 | 2015-03-09 11:12:05 +0100 | [diff] [blame] | 9 | * |
| 10 | * Derived from PN544 device driver: |
| 11 | * Copyright (C) 2012 Intel Corporation. All rights reserved. |
| 12 | * |
| 13 | * This program is free software; you can redistribute it and/or modify it |
| 14 | * under the terms and conditions of the GNU General Public License, |
| 15 | * version 2, as published by the Free Software Foundation. |
| 16 | * |
| 17 | * This program is distributed in the hope that it will be useful, |
| 18 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 19 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 20 | * GNU General Public License for more details. |
| 21 | * |
| 22 | * You should have received a copy of the GNU General Public License |
| 23 | * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| 24 | */ |
| 25 | |
| 26 | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| 27 | |
Oleg Zhurakivskyy | 551e306 | 2015-05-25 13:55:13 +0300 | [diff] [blame] | 28 | #include <linux/acpi.h> |
Clément Perrochaud | 6be8867 | 2015-03-09 11:12:05 +0100 | [diff] [blame] | 29 | #include <linux/delay.h> |
| 30 | #include <linux/i2c.h> |
| 31 | #include <linux/interrupt.h> |
| 32 | #include <linux/miscdevice.h> |
| 33 | #include <linux/module.h> |
| 34 | #include <linux/nfc.h> |
Samuel Ortiz | 262e719 | 2015-05-28 17:10:03 +0200 | [diff] [blame] | 35 | #include <linux/gpio/consumer.h> |
Clément Perrochaud | 6be8867 | 2015-03-09 11:12:05 +0100 | [diff] [blame] | 36 | #include <linux/of_gpio.h> |
| 37 | #include <linux/of_irq.h> |
| 38 | #include <linux/platform_data/nxp-nci.h> |
| 39 | #include <linux/unaligned/access_ok.h> |
| 40 | |
| 41 | #include <net/nfc/nfc.h> |
| 42 | |
| 43 | #include "nxp-nci.h" |
| 44 | |
| 45 | #define NXP_NCI_I2C_DRIVER_NAME "nxp-nci_i2c" |
| 46 | |
| 47 | #define NXP_NCI_I2C_MAX_PAYLOAD 32 |
| 48 | |
| 49 | struct nxp_nci_i2c_phy { |
| 50 | struct i2c_client *i2c_dev; |
| 51 | struct nci_dev *ndev; |
| 52 | |
| 53 | unsigned int gpio_en; |
| 54 | unsigned int gpio_fw; |
| 55 | |
| 56 | int hard_fault; /* |
| 57 | * < 0 if hardware error occurred (e.g. i2c err) |
| 58 | * and prevents normal operation. |
| 59 | */ |
| 60 | }; |
| 61 | |
| 62 | static int nxp_nci_i2c_set_mode(void *phy_id, |
| 63 | enum nxp_nci_mode mode) |
| 64 | { |
| 65 | struct nxp_nci_i2c_phy *phy = (struct nxp_nci_i2c_phy *) phy_id; |
| 66 | |
| 67 | gpio_set_value(phy->gpio_fw, (mode == NXP_NCI_MODE_FW) ? 1 : 0); |
| 68 | gpio_set_value(phy->gpio_en, (mode != NXP_NCI_MODE_COLD) ? 1 : 0); |
| 69 | usleep_range(10000, 15000); |
| 70 | |
| 71 | if (mode == NXP_NCI_MODE_COLD) |
| 72 | phy->hard_fault = 0; |
| 73 | |
| 74 | return 0; |
| 75 | } |
| 76 | |
| 77 | static int nxp_nci_i2c_write(void *phy_id, struct sk_buff *skb) |
| 78 | { |
| 79 | int r; |
| 80 | struct nxp_nci_i2c_phy *phy = phy_id; |
| 81 | struct i2c_client *client = phy->i2c_dev; |
| 82 | |
| 83 | if (phy->hard_fault != 0) |
| 84 | return phy->hard_fault; |
| 85 | |
| 86 | r = i2c_master_send(client, skb->data, skb->len); |
Fabio Estevam | 59df9bb | 2015-11-04 08:13:00 -0200 | [diff] [blame] | 87 | if (r < 0) { |
Clément Perrochaud | 6be8867 | 2015-03-09 11:12:05 +0100 | [diff] [blame] | 88 | /* Retry, chip was in standby */ |
| 89 | usleep_range(110000, 120000); |
| 90 | r = i2c_master_send(client, skb->data, skb->len); |
| 91 | } |
| 92 | |
| 93 | if (r < 0) { |
| 94 | nfc_err(&client->dev, "Error %d on I2C send\n", r); |
| 95 | } else if (r != skb->len) { |
| 96 | nfc_err(&client->dev, |
| 97 | "Invalid length sent: %u (expected %u)\n", |
| 98 | r, skb->len); |
| 99 | r = -EREMOTEIO; |
| 100 | } else { |
| 101 | /* Success but return 0 and not number of bytes */ |
| 102 | r = 0; |
| 103 | } |
| 104 | |
| 105 | return r; |
| 106 | } |
| 107 | |
Julia Lawall | 7cf6d08 | 2015-10-11 13:24:13 +0200 | [diff] [blame] | 108 | static const struct nxp_nci_phy_ops i2c_phy_ops = { |
Clément Perrochaud | 6be8867 | 2015-03-09 11:12:05 +0100 | [diff] [blame] | 109 | .set_mode = nxp_nci_i2c_set_mode, |
| 110 | .write = nxp_nci_i2c_write, |
| 111 | }; |
| 112 | |
| 113 | static int nxp_nci_i2c_fw_read(struct nxp_nci_i2c_phy *phy, |
| 114 | struct sk_buff **skb) |
| 115 | { |
| 116 | struct i2c_client *client = phy->i2c_dev; |
| 117 | u16 header; |
| 118 | size_t frame_len; |
| 119 | int r; |
| 120 | |
| 121 | r = i2c_master_recv(client, (u8 *) &header, NXP_NCI_FW_HDR_LEN); |
| 122 | if (r < 0) { |
| 123 | goto fw_read_exit; |
| 124 | } else if (r != NXP_NCI_FW_HDR_LEN) { |
| 125 | nfc_err(&client->dev, "Incorrect header length: %u\n", r); |
| 126 | r = -EBADMSG; |
| 127 | goto fw_read_exit; |
| 128 | } |
| 129 | |
| 130 | frame_len = (get_unaligned_be16(&header) & NXP_NCI_FW_FRAME_LEN_MASK) + |
| 131 | NXP_NCI_FW_CRC_LEN; |
| 132 | |
| 133 | *skb = alloc_skb(NXP_NCI_FW_HDR_LEN + frame_len, GFP_KERNEL); |
| 134 | if (*skb == NULL) { |
| 135 | r = -ENOMEM; |
| 136 | goto fw_read_exit; |
| 137 | } |
| 138 | |
| 139 | memcpy(skb_put(*skb, NXP_NCI_FW_HDR_LEN), &header, NXP_NCI_FW_HDR_LEN); |
| 140 | |
| 141 | r = i2c_master_recv(client, skb_put(*skb, frame_len), frame_len); |
| 142 | if (r != frame_len) { |
| 143 | nfc_err(&client->dev, |
| 144 | "Invalid frame length: %u (expected %zu)\n", |
| 145 | r, frame_len); |
| 146 | r = -EBADMSG; |
| 147 | goto fw_read_exit_free_skb; |
| 148 | } |
| 149 | |
| 150 | return 0; |
| 151 | |
| 152 | fw_read_exit_free_skb: |
| 153 | kfree_skb(*skb); |
| 154 | fw_read_exit: |
| 155 | return r; |
| 156 | } |
| 157 | |
| 158 | static int nxp_nci_i2c_nci_read(struct nxp_nci_i2c_phy *phy, |
| 159 | struct sk_buff **skb) |
| 160 | { |
| 161 | struct nci_ctrl_hdr header; /* May actually be a data header */ |
| 162 | struct i2c_client *client = phy->i2c_dev; |
| 163 | int r; |
| 164 | |
| 165 | r = i2c_master_recv(client, (u8 *) &header, NCI_CTRL_HDR_SIZE); |
| 166 | if (r < 0) { |
| 167 | goto nci_read_exit; |
| 168 | } else if (r != NCI_CTRL_HDR_SIZE) { |
| 169 | nfc_err(&client->dev, "Incorrect header length: %u\n", r); |
| 170 | r = -EBADMSG; |
| 171 | goto nci_read_exit; |
| 172 | } |
| 173 | |
| 174 | *skb = alloc_skb(NCI_CTRL_HDR_SIZE + header.plen, GFP_KERNEL); |
| 175 | if (*skb == NULL) { |
| 176 | r = -ENOMEM; |
| 177 | goto nci_read_exit; |
| 178 | } |
| 179 | |
| 180 | memcpy(skb_put(*skb, NCI_CTRL_HDR_SIZE), (void *) &header, |
| 181 | NCI_CTRL_HDR_SIZE); |
| 182 | |
| 183 | r = i2c_master_recv(client, skb_put(*skb, header.plen), header.plen); |
| 184 | if (r != header.plen) { |
| 185 | nfc_err(&client->dev, |
| 186 | "Invalid frame payload length: %u (expected %u)\n", |
| 187 | r, header.plen); |
| 188 | r = -EBADMSG; |
| 189 | goto nci_read_exit_free_skb; |
| 190 | } |
| 191 | |
| 192 | return 0; |
| 193 | |
| 194 | nci_read_exit_free_skb: |
| 195 | kfree_skb(*skb); |
| 196 | nci_read_exit: |
| 197 | return r; |
| 198 | } |
| 199 | |
| 200 | static irqreturn_t nxp_nci_i2c_irq_thread_fn(int irq, void *phy_id) |
| 201 | { |
| 202 | struct nxp_nci_i2c_phy *phy = phy_id; |
| 203 | struct i2c_client *client; |
| 204 | struct nxp_nci_info *info; |
| 205 | |
| 206 | struct sk_buff *skb = NULL; |
| 207 | int r = 0; |
| 208 | |
| 209 | if (!phy || !phy->ndev) |
| 210 | goto exit_irq_none; |
| 211 | |
| 212 | client = phy->i2c_dev; |
| 213 | |
| 214 | if (!client || irq != client->irq) |
| 215 | goto exit_irq_none; |
| 216 | |
| 217 | info = nci_get_drvdata(phy->ndev); |
| 218 | |
| 219 | if (!info) |
| 220 | goto exit_irq_none; |
| 221 | |
| 222 | mutex_lock(&info->info_lock); |
| 223 | |
| 224 | if (phy->hard_fault != 0) |
| 225 | goto exit_irq_handled; |
| 226 | |
| 227 | switch (info->mode) { |
| 228 | case NXP_NCI_MODE_NCI: |
| 229 | r = nxp_nci_i2c_nci_read(phy, &skb); |
| 230 | break; |
| 231 | case NXP_NCI_MODE_FW: |
| 232 | r = nxp_nci_i2c_fw_read(phy, &skb); |
| 233 | break; |
| 234 | case NXP_NCI_MODE_COLD: |
| 235 | r = -EREMOTEIO; |
| 236 | break; |
| 237 | } |
| 238 | |
| 239 | if (r == -EREMOTEIO) { |
| 240 | phy->hard_fault = r; |
| 241 | skb = NULL; |
| 242 | } else if (r < 0) { |
| 243 | nfc_err(&client->dev, "Read failed with error %d\n", r); |
| 244 | goto exit_irq_handled; |
| 245 | } |
| 246 | |
| 247 | switch (info->mode) { |
| 248 | case NXP_NCI_MODE_NCI: |
| 249 | nci_recv_frame(phy->ndev, skb); |
| 250 | break; |
| 251 | case NXP_NCI_MODE_FW: |
| 252 | nxp_nci_fw_recv_frame(phy->ndev, skb); |
| 253 | break; |
| 254 | case NXP_NCI_MODE_COLD: |
| 255 | break; |
| 256 | } |
| 257 | |
| 258 | exit_irq_handled: |
| 259 | mutex_unlock(&info->info_lock); |
| 260 | return IRQ_HANDLED; |
| 261 | exit_irq_none: |
| 262 | WARN_ON_ONCE(1); |
| 263 | return IRQ_NONE; |
| 264 | } |
| 265 | |
Clément Perrochaud | 6be8867 | 2015-03-09 11:12:05 +0100 | [diff] [blame] | 266 | static int nxp_nci_i2c_parse_devtree(struct i2c_client *client) |
| 267 | { |
| 268 | struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client); |
| 269 | struct device_node *pp; |
| 270 | int r; |
| 271 | |
| 272 | pp = client->dev.of_node; |
| 273 | if (!pp) |
| 274 | return -ENODEV; |
| 275 | |
| 276 | r = of_get_named_gpio(pp, "enable-gpios", 0); |
| 277 | if (r == -EPROBE_DEFER) |
| 278 | r = of_get_named_gpio(pp, "enable-gpios", 0); |
| 279 | if (r < 0) { |
| 280 | nfc_err(&client->dev, "Failed to get EN gpio, error: %d\n", r); |
| 281 | return r; |
| 282 | } |
| 283 | phy->gpio_en = r; |
| 284 | |
| 285 | r = of_get_named_gpio(pp, "firmware-gpios", 0); |
| 286 | if (r == -EPROBE_DEFER) |
| 287 | r = of_get_named_gpio(pp, "firmware-gpios", 0); |
| 288 | if (r < 0) { |
| 289 | nfc_err(&client->dev, "Failed to get FW gpio, error: %d\n", r); |
| 290 | return r; |
| 291 | } |
| 292 | phy->gpio_fw = r; |
| 293 | |
Clément Perrochaud | 6be8867 | 2015-03-09 11:12:05 +0100 | [diff] [blame] | 294 | return 0; |
| 295 | } |
| 296 | |
Oleg Zhurakivskyy | 551e306 | 2015-05-25 13:55:13 +0300 | [diff] [blame] | 297 | static int nxp_nci_i2c_acpi_config(struct nxp_nci_i2c_phy *phy) |
| 298 | { |
| 299 | struct i2c_client *client = phy->i2c_dev; |
Christophe Ricard | be103b7 | 2015-12-23 23:45:25 +0100 | [diff] [blame^] | 300 | struct gpio_desc *gpiod_en, *gpiod_fw; |
Oleg Zhurakivskyy | 551e306 | 2015-05-25 13:55:13 +0300 | [diff] [blame] | 301 | |
Uwe Kleine-König | 3bfe768 | 2015-06-12 09:04:55 +0200 | [diff] [blame] | 302 | gpiod_en = devm_gpiod_get_index(&client->dev, NULL, 2, GPIOD_OUT_LOW); |
| 303 | gpiod_fw = devm_gpiod_get_index(&client->dev, NULL, 1, GPIOD_OUT_LOW); |
Oleg Zhurakivskyy | 551e306 | 2015-05-25 13:55:13 +0300 | [diff] [blame] | 304 | |
Christophe Ricard | be103b7 | 2015-12-23 23:45:25 +0100 | [diff] [blame^] | 305 | if (IS_ERR(gpiod_en) || IS_ERR(gpiod_fw)) { |
Oleg Zhurakivskyy | 551e306 | 2015-05-25 13:55:13 +0300 | [diff] [blame] | 306 | nfc_err(&client->dev, "No GPIOs\n"); |
| 307 | return -EINVAL; |
| 308 | } |
| 309 | |
Oleg Zhurakivskyy | 551e306 | 2015-05-25 13:55:13 +0300 | [diff] [blame] | 310 | phy->gpio_en = desc_to_gpio(gpiod_en); |
| 311 | phy->gpio_fw = desc_to_gpio(gpiod_fw); |
Oleg Zhurakivskyy | 551e306 | 2015-05-25 13:55:13 +0300 | [diff] [blame] | 312 | |
| 313 | return 0; |
| 314 | } |
| 315 | |
Clément Perrochaud | 6be8867 | 2015-03-09 11:12:05 +0100 | [diff] [blame] | 316 | static int nxp_nci_i2c_probe(struct i2c_client *client, |
| 317 | const struct i2c_device_id *id) |
| 318 | { |
| 319 | struct nxp_nci_i2c_phy *phy; |
| 320 | struct nxp_nci_nfc_platform_data *pdata; |
| 321 | int r; |
| 322 | |
| 323 | if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { |
| 324 | nfc_err(&client->dev, "Need I2C_FUNC_I2C\n"); |
| 325 | r = -ENODEV; |
| 326 | goto probe_exit; |
| 327 | } |
| 328 | |
| 329 | phy = devm_kzalloc(&client->dev, sizeof(struct nxp_nci_i2c_phy), |
| 330 | GFP_KERNEL); |
| 331 | if (!phy) { |
| 332 | r = -ENOMEM; |
| 333 | goto probe_exit; |
| 334 | } |
| 335 | |
| 336 | phy->i2c_dev = client; |
| 337 | i2c_set_clientdata(client, phy); |
| 338 | |
| 339 | pdata = client->dev.platform_data; |
| 340 | |
| 341 | if (!pdata && client->dev.of_node) { |
| 342 | r = nxp_nci_i2c_parse_devtree(client); |
| 343 | if (r < 0) { |
| 344 | nfc_err(&client->dev, "Failed to get DT data\n"); |
| 345 | goto probe_exit; |
| 346 | } |
| 347 | } else if (pdata) { |
| 348 | phy->gpio_en = pdata->gpio_en; |
| 349 | phy->gpio_fw = pdata->gpio_fw; |
Oleg Zhurakivskyy | 551e306 | 2015-05-25 13:55:13 +0300 | [diff] [blame] | 350 | } else if (ACPI_HANDLE(&client->dev)) { |
| 351 | r = nxp_nci_i2c_acpi_config(phy); |
| 352 | if (r < 0) |
| 353 | goto probe_exit; |
| 354 | goto nci_probe; |
Clément Perrochaud | 6be8867 | 2015-03-09 11:12:05 +0100 | [diff] [blame] | 355 | } else { |
| 356 | nfc_err(&client->dev, "No platform data\n"); |
| 357 | r = -EINVAL; |
| 358 | goto probe_exit; |
| 359 | } |
| 360 | |
| 361 | r = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en, |
| 362 | GPIOF_OUT_INIT_LOW, "nxp_nci_en"); |
| 363 | if (r < 0) |
| 364 | goto probe_exit; |
| 365 | |
| 366 | r = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw, |
| 367 | GPIOF_OUT_INIT_LOW, "nxp_nci_fw"); |
| 368 | if (r < 0) |
| 369 | goto probe_exit; |
| 370 | |
Oleg Zhurakivskyy | 551e306 | 2015-05-25 13:55:13 +0300 | [diff] [blame] | 371 | nci_probe: |
Clément Perrochaud | 6be8867 | 2015-03-09 11:12:05 +0100 | [diff] [blame] | 372 | r = nxp_nci_probe(phy, &client->dev, &i2c_phy_ops, |
| 373 | NXP_NCI_I2C_MAX_PAYLOAD, &phy->ndev); |
| 374 | if (r < 0) |
| 375 | goto probe_exit; |
| 376 | |
| 377 | r = request_threaded_irq(client->irq, NULL, |
| 378 | nxp_nci_i2c_irq_thread_fn, |
| 379 | IRQF_TRIGGER_RISING | IRQF_ONESHOT, |
| 380 | NXP_NCI_I2C_DRIVER_NAME, phy); |
| 381 | if (r < 0) |
| 382 | nfc_err(&client->dev, "Unable to register IRQ handler\n"); |
| 383 | |
| 384 | probe_exit: |
| 385 | return r; |
| 386 | } |
| 387 | |
| 388 | static int nxp_nci_i2c_remove(struct i2c_client *client) |
| 389 | { |
| 390 | struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client); |
| 391 | |
| 392 | nxp_nci_remove(phy->ndev); |
| 393 | free_irq(client->irq, phy); |
| 394 | |
| 395 | return 0; |
| 396 | } |
| 397 | |
| 398 | static struct i2c_device_id nxp_nci_i2c_id_table[] = { |
| 399 | {"nxp-nci_i2c", 0}, |
| 400 | {} |
| 401 | }; |
| 402 | MODULE_DEVICE_TABLE(i2c, nxp_nci_i2c_id_table); |
| 403 | |
| 404 | static const struct of_device_id of_nxp_nci_i2c_match[] = { |
| 405 | { .compatible = "nxp,nxp-nci-i2c", }, |
| 406 | {}, |
| 407 | }; |
| 408 | MODULE_DEVICE_TABLE(of, of_nxp_nci_i2c_match); |
| 409 | |
Oleg Zhurakivskyy | 551e306 | 2015-05-25 13:55:13 +0300 | [diff] [blame] | 410 | #ifdef CONFIG_ACPI |
| 411 | static struct acpi_device_id acpi_id[] = { |
| 412 | { "NXP7471" }, |
| 413 | { }, |
| 414 | }; |
| 415 | MODULE_DEVICE_TABLE(acpi, acpi_id); |
| 416 | #endif |
| 417 | |
Clément Perrochaud | 6be8867 | 2015-03-09 11:12:05 +0100 | [diff] [blame] | 418 | static struct i2c_driver nxp_nci_i2c_driver = { |
| 419 | .driver = { |
| 420 | .name = NXP_NCI_I2C_DRIVER_NAME, |
| 421 | .owner = THIS_MODULE, |
Oleg Zhurakivskyy | 551e306 | 2015-05-25 13:55:13 +0300 | [diff] [blame] | 422 | .acpi_match_table = ACPI_PTR(acpi_id), |
Clément Perrochaud | 6be8867 | 2015-03-09 11:12:05 +0100 | [diff] [blame] | 423 | .of_match_table = of_match_ptr(of_nxp_nci_i2c_match), |
| 424 | }, |
| 425 | .probe = nxp_nci_i2c_probe, |
| 426 | .id_table = nxp_nci_i2c_id_table, |
| 427 | .remove = nxp_nci_i2c_remove, |
| 428 | }; |
| 429 | |
| 430 | module_i2c_driver(nxp_nci_i2c_driver); |
| 431 | |
| 432 | MODULE_LICENSE("GPL"); |
| 433 | MODULE_DESCRIPTION("I2C driver for NXP NCI NFC controllers"); |
| 434 | MODULE_AUTHOR("Clément Perrochaud <clement.perrochaud@nxp.com>"); |
Oleg Zhurakivskyy | 551e306 | 2015-05-25 13:55:13 +0300 | [diff] [blame] | 435 | MODULE_AUTHOR("Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>"); |