| Mischa Jonker | a92a5d0 | 2013-04-18 11:40:39 +0200 | [diff] [blame] | 1 | /* |
| 2 | * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) |
| 3 | * |
| 4 | * This program is free software; you can redistribute it and/or modify |
| 5 | * it under the terms of the GNU General Public License version 2 as |
| 6 | * published by the Free Software Foundation. |
| 7 | */ |
| 8 | /dts-v1/; |
| 9 | |
| 10 | /include/ "skeleton.dtsi" |
| 11 | |
| 12 | / { |
| 13 | compatible = "snps,nsimosci"; |
| 14 | clock-frequency = <80000000>; /* 80 MHZ */ |
| 15 | #address-cells = <1>; |
| 16 | #size-cells = <1>; |
| 17 | interrupt-parent = <&intc>; |
| 18 | |
| 19 | chosen { |
| 20 | bootargs = "console=tty0 consoleblank=0"; |
| 21 | }; |
| 22 | |
| 23 | aliases { |
| 24 | serial0 = &uart0; |
| 25 | }; |
| 26 | |
| 27 | memory { |
| 28 | device_type = "memory"; |
| 29 | reg = <0x80000000 0x10000000>; /* 256M */ |
| 30 | }; |
| 31 | |
| 32 | fpga { |
| 33 | compatible = "simple-bus"; |
| 34 | #address-cells = <1>; |
| 35 | #size-cells = <1>; |
| 36 | |
| 37 | /* child and parent address space 1:1 mapped */ |
| 38 | ranges; |
| 39 | |
| 40 | intc: interrupt-controller { |
| 41 | compatible = "snps,arc700-intc"; |
| 42 | interrupt-controller; |
| 43 | #interrupt-cells = <1>; |
| 44 | }; |
| 45 | |
| 46 | uart0: serial@c0000000 { |
| 47 | compatible = "snps,dw-apb-uart"; |
| 48 | reg = <0xc0000000 0x2000>; |
| 49 | interrupts = <11>; |
| 50 | #clock-frequency = <80000000>; |
| 51 | clock-frequency = <3686400>; |
| 52 | baud = <115200>; |
| 53 | reg-shift = <2>; |
| 54 | reg-io-width = <4>; |
| 55 | status = "okay"; |
| 56 | }; |
| 57 | |
| 58 | pgu0: pgu@c9000000 { |
| 59 | compatible = "snps,arcpgufb"; |
| 60 | reg = <0xc9000000 0x400>; |
| 61 | }; |
| 62 | |
| 63 | ps2: ps2@c9001000 { |
| 64 | compatible = "snps,arc_ps2"; |
| 65 | reg = <0xc9000400 0x14>; |
| 66 | interrupts = <13>; |
| 67 | interrupt-names = "arc_ps2_irq"; |
| 68 | }; |
| 69 | |
| 70 | eth0: ethernet@c0003000 { |
| 71 | compatible = "snps,oscilan"; |
| 72 | reg = <0xc0003000 0x44>; |
| 73 | interrupts = <7>, <8>; |
| 74 | interrupt-names = "rx", "tx"; |
| 75 | }; |
| 76 | }; |
| 77 | }; |