Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-5.4 / d97ca99f3ea8ed3b12c88b51ad53dd6c9bf7ae5d / . / arch / arm / boot / dts / imx6ul.dtsi
blob: e6e3e54604b1a1168df9c1e77fc4f7158de37766 [file] [log] [blame]
Frank Lia5fcccb2015-07-10 02:09:45 +0800[diff] [blame]1/*
2 * Copyright 2015 Freescale Semiconductor, Inc.
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8
9#include <dt-bindings/clock/imx6ul-clock.h>
10#include <dt-bindings/gpio/gpio.h>
Lothar Waßmann89435fe2016-01-20 11:08:56 +0100[diff] [blame]11#include <dt-bindings/input/input.h>
Frank Lia5fcccb2015-07-10 02:09:45 +0800[diff] [blame]12#include <dt-bindings/interrupt-controller/arm-gic.h>
13#include "imx6ul-pinfunc.h"
14#include "skeleton.dtsi"
15
16/ {
17 aliases {
Fugang Duan01f3dc72015-07-28 15:30:41 +0800[diff] [blame]18 ethernet0 = &fec1;
19 ethernet1 = &fec2;
Frank Lia5fcccb2015-07-10 02:09:45 +0800[diff] [blame]20 gpio0 = &gpio1;
21 gpio1 = &gpio2;
22 gpio2 = &gpio3;
23 gpio3 = &gpio4;
24 gpio4 = &gpio5;
25 i2c0 = &i2c1;
26 i2c1 = &i2c2;
27 i2c2 = &i2c3;
28 i2c3 = &i2c4;
29 mmc0 = &usdhc1;
30 mmc1 = &usdhc2;
31 serial0 = &uart1;
32 serial1 = &uart2;
33 serial2 = &uart3;
34 serial3 = &uart4;
35 serial4 = &uart5;
36 serial5 = &uart6;
37 serial6 = &uart7;
38 serial7 = &uart8;
39 spi0 = &ecspi1;
40 spi1 = &ecspi2;
41 spi2 = &ecspi3;
42 spi3 = &ecspi4;
43 usbphy0 = &usbphy1;
44 usbphy1 = &usbphy2;
45 };
46
47 cpus {
48 #address-cells = <1>;
49 #size-cells = <0>;
50
51 cpu0: cpu@0 {
52 compatible = "arm,cortex-a7";
53 device_type = "cpu";
54 reg = <0>;
55 clock-latency = <61036>; /* two CLK32 periods */
56 operating-points = <
57 /* kHz uV */
58 528000 1250000
59 396000 1150000
60 198000 1150000
61 >;
62 fsl,soc-operating-points = <
63 /* KHz uV */
64 528000 1250000
65 396000 1150000
66 198000 1150000
67 >;
68 clocks = <&clks IMX6UL_CLK_ARM>,
69 <&clks IMX6UL_CLK_PLL2_BUS>,
70 <&clks IMX6UL_CLK_PLL2_PFD2>,
71 <&clks IMX6UL_CA7_SECONDARY_SEL>,
72 <&clks IMX6UL_CLK_STEP>,
73 <&clks IMX6UL_CLK_PLL1_SW>,
74 <&clks IMX6UL_CLK_PLL1_SYS>,
75 <&clks IMX6UL_PLL1_BYPASS>,
76 <&clks IMX6UL_CLK_PLL1>,
77 <&clks IMX6UL_PLL1_BYPASS_SRC>,
78 <&clks IMX6UL_CLK_OSC>;
79 clock-names = "arm", "pll2_bus", "pll2_pfd2_396m",
80 "secondary_sel", "step", "pll1_sw",
81 "pll1_sys", "pll1_bypass", "pll1",
82 "pll1_bypass_src", "osc";
83 arm-supply = <&reg_arm>;
84 soc-supply = <&reg_soc>;
85 };
86 };
87
88 intc: interrupt-controller@00a01000 {
89 compatible = "arm,cortex-a7-gic";
90 #interrupt-cells = <3>;
91 interrupt-controller;
92 reg = <0x00a01000 0x1000>,
93 <0x00a02000 0x1000>,
94 <0x00a04000 0x2000>,
95 <0x00a06000 0x2000>;
96 };
97
98 ckil: clock-cli {
99 compatible = "fixed-clock";
100 #clock-cells = <0>;
101 clock-frequency = <32768>;
102 clock-output-names = "ckil";
103 };
104
105 osc: clock-osc {
106 compatible = "fixed-clock";
107 #clock-cells = <0>;
108 clock-frequency = <24000000>;
109 clock-output-names = "osc";
110 };
111
112 ipp_di0: clock-di0 {
113 compatible = "fixed-clock";
114 #clock-cells = <0>;
115 clock-frequency = <0>;
116 clock-output-names = "ipp_di0";
117 };
118
119 ipp_di1: clock-di1 {
120 compatible = "fixed-clock";
121 #clock-cells = <0>;
122 clock-frequency = <0>;
123 clock-output-names = "ipp_di1";
124 };
125
126 soc {
127 #address-cells = <1>;
128 #size-cells = <1>;
129 compatible = "simple-bus";
Anson Huang18619ff2015-08-04 01:12:12 +0800[diff] [blame]130 interrupt-parent = <&gpc>;
Frank Lia5fcccb2015-07-10 02:09:45 +0800[diff] [blame]131 ranges;
132
133 pmu {
134 compatible = "arm,cortex-a7-pmu";
135 interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
136 status = "disabled";
137 };
138
Anson Huang322d09d2015-08-05 01:48:35 +0800[diff] [blame]139 ocram: sram@00900000 {
140 compatible = "mmio-sram";
141 reg = <0x00900000 0x20000>;
142 };
143
Frank Lia5fcccb2015-07-10 02:09:45 +0800[diff] [blame]144 aips1: aips-bus@02000000 {
145 compatible = "fsl,aips-bus", "simple-bus";
146 #address-cells = <1>;
147 #size-cells = <1>;
148 reg = <0x02000000 0x100000>;
149 ranges;
150
151 spba-bus@02000000 {
152 compatible = "fsl,spba-bus", "simple-bus";
153 #address-cells = <1>;
154 #size-cells = <1>;
155 reg = <0x02000000 0x40000>;
156 ranges;
157
158 ecspi1: ecspi@02008000 {
159 #address-cells = <1>;
160 #size-cells = <0>;
161 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
162 reg = <0x02008000 0x4000>;
163 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
164 clocks = <&clks IMX6UL_CLK_ECSPI1>,
165 <&clks IMX6UL_CLK_ECSPI1>;
166 clock-names = "ipg", "per";
167 status = "disabled";
168 };
169
170 ecspi2: ecspi@0200c000 {
171 #address-cells = <1>;
172 #size-cells = <0>;
173 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
174 reg = <0x0200c000 0x4000>;
175 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
176 clocks = <&clks IMX6UL_CLK_ECSPI2>,
177 <&clks IMX6UL_CLK_ECSPI2>;
178 clock-names = "ipg", "per";
179 status = "disabled";
180 };
181
182 ecspi3: ecspi@02010000 {
183 #address-cells = <1>;
184 #size-cells = <0>;
185 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
186 reg = <0x02010000 0x4000>;
187 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
188 clocks = <&clks IMX6UL_CLK_ECSPI3>,
189 <&clks IMX6UL_CLK_ECSPI3>;
190 clock-names = "ipg", "per";
191 status = "disabled";
192 };
193
194 ecspi4: ecspi@02014000 {
195 #address-cells = <1>;
196 #size-cells = <0>;
197 compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi";
198 reg = <0x02014000 0x4000>;
199 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
200 clocks = <&clks IMX6UL_CLK_ECSPI4>,
201 <&clks IMX6UL_CLK_ECSPI4>;
202 clock-names = "ipg", "per";
203 status = "disabled";
204 };
205
206 uart7: serial@02018000 {
207 compatible = "fsl,imx6ul-uart",
208 "fsl,imx6q-uart";
209 reg = <0x02018000 0x4000>;
210 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
211 clocks = <&clks IMX6UL_CLK_UART7_IPG>,
212 <&clks IMX6UL_CLK_UART7_SERIAL>;
213 clock-names = "ipg", "per";
214 status = "disabled";
215 };
216
217 uart1: serial@02020000 {
218 compatible = "fsl,imx6ul-uart",
219 "fsl,imx6q-uart";
220 reg = <0x02020000 0x4000>;
221 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
222 clocks = <&clks IMX6UL_CLK_UART1_IPG>,
223 <&clks IMX6UL_CLK_UART1_SERIAL>;
224 clock-names = "ipg", "per";
225 status = "disabled";
226 };
227
228 uart8: serial@02024000 {
229 compatible = "fsl,imx6ul-uart",
230 "fsl,imx6q-uart";
231 reg = <0x02024000 0x4000>;
232 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
233 clocks = <&clks IMX6UL_CLK_UART8_IPG>,
234 <&clks IMX6UL_CLK_UART8_SERIAL>;
235 clock-names = "ipg", "per";
236 status = "disabled";
237 };
238 };
239
Lothar Waßmann302e01b2016-01-20 11:08:55 +0100[diff] [blame]240 tsc: tsc@02040000 {
241 compatible = "fsl,imx6ul-tsc";
242 reg = <0x02040000 0x4000>, <0x0219c000 0x4000>;
243 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
244 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
245 clocks = <&clks IMX6UL_CLK_IPG>,
246 <&clks IMX6UL_CLK_ADC2>;
247 clock-names = "tsc", "adc";
248 status = "disabled";
249 };
250
Frank Lia5fcccb2015-07-10 02:09:45 +0800[diff] [blame]251 gpt1: gpt@02098000 {
252 compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
253 reg = <0x02098000 0x4000>;
254 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
255 clocks = <&clks IMX6UL_CLK_GPT1_BUS>,
256 <&clks IMX6UL_CLK_GPT1_SERIAL>;
257 clock-names = "ipg", "per";
258 };
259
260 gpio1: gpio@0209c000 {
261 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
262 reg = <0x0209c000 0x4000>;
263 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
264 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
265 gpio-controller;
266 #gpio-cells = <2>;
267 interrupt-controller;
268 #interrupt-cells = <2>;
269 };
270
271 gpio2: gpio@020a0000 {
272 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
273 reg = <0x020a0000 0x4000>;
274 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
275 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
276 gpio-controller;
277 #gpio-cells = <2>;
278 interrupt-controller;
279 #interrupt-cells = <2>;
280 };
281
282 gpio3: gpio@020a4000 {
283 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
284 reg = <0x020a4000 0x4000>;
285 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
286 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
287 gpio-controller;
288 #gpio-cells = <2>;
289 interrupt-controller;
290 #interrupt-cells = <2>;
291 };
292
293 gpio4: gpio@020a8000 {
294 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
295 reg = <0x020a8000 0x4000>;
296 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
297 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
298 gpio-controller;
299 #gpio-cells = <2>;
300 interrupt-controller;
301 #interrupt-cells = <2>;
302 };
303
304 gpio5: gpio@020ac000 {
305 compatible = "fsl,imx6ul-gpio", "fsl,imx35-gpio";
306 reg = <0x020ac000 0x4000>;
307 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
308 <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
309 gpio-controller;
310 #gpio-cells = <2>;
311 interrupt-controller;
312 #interrupt-cells = <2>;
313 };
314
Fugang Duan01f3dc72015-07-28 15:30:41 +0800[diff] [blame]315 fec2: ethernet@020b4000 {
316 compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
317 reg = <0x020b4000 0x4000>;
318 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
319 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
320 clocks = <&clks IMX6UL_CLK_ENET>,
321 <&clks IMX6UL_CLK_ENET_AHB>,
322 <&clks IMX6UL_CLK_ENET_PTP>,
323 <&clks IMX6UL_CLK_ENET2_REF_125M>,
324 <&clks IMX6UL_CLK_ENET2_REF_125M>;
325 clock-names = "ipg", "ahb", "ptp",
326 "enet_clk_ref", "enet_out";
327 fsl,num-tx-queues=<1>;
328 fsl,num-rx-queues=<1>;
329 status = "disabled";
330 };
331
Frank Lia5fcccb2015-07-10 02:09:45 +0800[diff] [blame]332 wdog1: wdog@020bc000 {
333 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
334 reg = <0x020bc000 0x4000>;
335 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
336 clocks = <&clks IMX6UL_CLK_WDOG1>;
337 };
338
339 wdog2: wdog@020c0000 {
340 compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
341 reg = <0x020c0000 0x4000>;
342 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
343 clocks = <&clks IMX6UL_CLK_WDOG2>;
344 status = "disabled";
345 };
346
347 clks: ccm@020c4000 {
348 compatible = "fsl,imx6ul-ccm";
349 reg = <0x020c4000 0x4000>;
350 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
351 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
352 #clock-cells = <1>;
353 clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
354 clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
355 };
356
357 anatop: anatop@020c8000 {
358 compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
359 "syscon", "simple-bus";
360 reg = <0x020c8000 0x1000>;
361 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
362 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
363 <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
364
365 reg_3p0: regulator-3p0@120 {
366 compatible = "fsl,anatop-regulator";
367 regulator-name = "vdd3p0";
368 regulator-min-microvolt = <2625000>;
369 regulator-max-microvolt = <3400000>;
370 anatop-reg-offset = <0x120>;
371 anatop-vol-bit-shift = <8>;
372 anatop-vol-bit-width = <5>;
373 anatop-min-bit-val = <0>;
374 anatop-min-voltage = <2625000>;
375 anatop-max-voltage = <3400000>;
376 anatop-enable-bit = <0>;
377 };
378
379 reg_arm: regulator-vddcore@140 {
380 compatible = "fsl,anatop-regulator";
381 regulator-name = "cpu";
382 regulator-min-microvolt = <725000>;
383 regulator-max-microvolt = <1450000>;
384 regulator-always-on;
385 anatop-reg-offset = <0x140>;
386 anatop-vol-bit-shift = <0>;
387 anatop-vol-bit-width = <5>;
388 anatop-delay-reg-offset = <0x170>;
389 anatop-delay-bit-shift = <24>;
390 anatop-delay-bit-width = <2>;
391 anatop-min-bit-val = <1>;
392 anatop-min-voltage = <725000>;
393 anatop-max-voltage = <1450000>;
394 };
395
396 reg_soc: regulator-vddsoc@140 {
397 compatible = "fsl,anatop-regulator";
398 regulator-name = "vddsoc";
399 regulator-min-microvolt = <725000>;
400 regulator-max-microvolt = <1450000>;
401 regulator-always-on;
402 anatop-reg-offset = <0x140>;
403 anatop-vol-bit-shift = <18>;
404 anatop-vol-bit-width = <5>;
405 anatop-delay-reg-offset = <0x170>;
406 anatop-delay-bit-shift = <28>;
407 anatop-delay-bit-width = <2>;
408 anatop-min-bit-val = <1>;
409 anatop-min-voltage = <725000>;
410 anatop-max-voltage = <1450000>;
411 };
412 };
413
414 usbphy1: usbphy@020c9000 {
415 compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
416 reg = <0x020c9000 0x1000>;
417 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
418 clocks = <&clks IMX6UL_CLK_USBPHY1>;
419 phy-3p0-supply = <&reg_3p0>;
420 fsl,anatop = <&anatop>;
421 };
422
423 usbphy2: usbphy@020ca000 {
424 compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
425 reg = <0x020ca000 0x1000>;
426 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
427 clocks = <&clks IMX6UL_CLK_USBPHY2>;
428 phy-3p0-supply = <&reg_3p0>;
429 fsl,anatop = <&anatop>;
430 };
431
Anson Huang5b032872015-08-04 23:54:58 +0800[diff] [blame]432 snvs: snvs@020cc000 {
433 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
434 reg = <0x020cc000 0x4000>;
435
436 snvs_rtc: snvs-rtc-lp {
437 compatible = "fsl,sec-v4.0-mon-rtc-lp";
438 regmap = <&snvs>;
439 offset = <0x34>;
440 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
441 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
442 };
Anson Huang36032572015-08-06 16:16:01 +0800[diff] [blame]443
Anson Huangab0a05d2015-09-06 15:29:34 +0800[diff] [blame]444 snvs_poweroff: snvs-poweroff {
445 compatible = "syscon-poweroff";
446 regmap = <&snvs>;
447 offset = <0x38>;
448 mask = <0x60>;
449 status = "disabled";
450 };
451
Anson Huang36032572015-08-06 16:16:01 +0800[diff] [blame]452 snvs_pwrkey: snvs-powerkey {
453 compatible = "fsl,sec-v4.0-pwrkey";
454 regmap = <&snvs>;
455 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
456 linux,keycode = <KEY_POWER>;
457 wakeup-source;
458 };
Anson Huang5b032872015-08-04 23:54:58 +0800[diff] [blame]459 };
460
Frank Lia5fcccb2015-07-10 02:09:45 +0800[diff] [blame]461 epit1: epit@020d0000 {
462 reg = <0x020d0000 0x4000>;
463 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
464 };
465
466 epit2: epit@020d4000 {
467 reg = <0x020d4000 0x4000>;
468 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
469 };
470
471 src: src@020d8000 {
472 compatible = "fsl,imx6ul-src", "fsl,imx51-src";
473 reg = <0x020d8000 0x4000>;
474 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
475 <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
476 #reset-cells = <1>;
477 };
478
479 gpc: gpc@020dc000 {
480 compatible = "fsl,imx6ul-gpc", "fsl,imx6q-gpc";
481 reg = <0x020dc000 0x4000>;
Anson Huang18619ff2015-08-04 01:12:12 +0800[diff] [blame]482 interrupt-controller;
483 #interrupt-cells = <3>;
Frank Lia5fcccb2015-07-10 02:09:45 +0800[diff] [blame]484 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
Anson Huang18619ff2015-08-04 01:12:12 +0800[diff] [blame]485 interrupt-parent = <&intc>;
Frank Lia5fcccb2015-07-10 02:09:45 +0800[diff] [blame]486 };
487
488 iomuxc: iomuxc@020e0000 {
489 compatible = "fsl,imx6ul-iomuxc";
490 reg = <0x020e0000 0x4000>;
491 };
492
493 gpr: iomuxc-gpr@020e4000 {
494 compatible = "fsl,imx6ul-iomuxc-gpr", "syscon";
495 reg = <0x020e4000 0x4000>;
496 };
497
498 gpt2: gpt@020e8000 {
499 compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
500 reg = <0x020e8000 0x4000>;
501 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
Lothar Waßmannd97ca992016-01-20 11:08:57 +0100[diff] [blame^]502 clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
503 <&clks IMX6UL_CLK_GPT2_SERIAL>;
Frank Lia5fcccb2015-07-10 02:09:45 +0800[diff] [blame]504 clock-names = "ipg", "per";
505 };
506
507 pwm5: pwm@020f0000 {
508 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
509 reg = <0x020f0000 0x4000>;
510 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
511 clocks = <&clks IMX6UL_CLK_DUMMY>,
512 <&clks IMX6UL_CLK_DUMMY>;
513 clock-names = "ipg", "per";
514 #pwm-cells = <2>;
515 };
516
517 pwm6: pwm@020f4000 {
518 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
519 reg = <0x020f4000 0x4000>;
520 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
521 clocks = <&clks IMX6UL_CLK_DUMMY>,
522 <&clks IMX6UL_CLK_DUMMY>;
523 clock-names = "ipg", "per";
524 #pwm-cells = <2>;
525 };
526
527 pwm7: pwm@020f8000 {
528 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
529 reg = <0x020f8000 0x4000>;
530 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
531 clocks = <&clks IMX6UL_CLK_DUMMY>,
532 <&clks IMX6UL_CLK_DUMMY>;
533 clock-names = "ipg", "per";
534 #pwm-cells = <2>;
535 };
536
537 pwm8: pwm@020fc000 {
538 compatible = "fsl,imx6ul-pwm", "fsl,imx27-pwm";
539 reg = <0x020fc000 0x4000>;
540 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
541 clocks = <&clks IMX6UL_CLK_DUMMY>,
542 <&clks IMX6UL_CLK_DUMMY>;
543 clock-names = "ipg", "per";
544 #pwm-cells = <2>;
545 };
546 };
547
548 aips2: aips-bus@02100000 {
549 compatible = "fsl,aips-bus", "simple-bus";
550 #address-cells = <1>;
551 #size-cells = <1>;
552 reg = <0x02100000 0x100000>;
553 ranges;
554
Frank Licad2cb62015-07-17 04:03:16 +0800[diff] [blame]555 usbotg1: usb@02184000 {
556 compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
557 reg = <0x02184000 0x200>;
558 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
559 clocks = <&clks IMX6UL_CLK_USBOH3>;
560 fsl,usbphy = <&usbphy1>;
561 fsl,usbmisc = <&usbmisc 0>;
562 fsl,anatop = <&anatop>;
Peter Chen9493bf52015-09-30 10:17:16 +0800[diff] [blame]563 ahb-burst-config = <0x0>;
Peter Chen2b1a40e2015-09-30 10:17:17 +0800[diff] [blame]564 tx-burst-size-dword = <0x10>;
565 rx-burst-size-dword = <0x10>;
Frank Licad2cb62015-07-17 04:03:16 +0800[diff] [blame]566 status = "disabled";
567 };
568
569 usbotg2: usb@02184200 {
570 compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
571 reg = <0x02184200 0x200>;
572 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
573 clocks = <&clks IMX6UL_CLK_USBOH3>;
574 fsl,usbphy = <&usbphy2>;
575 fsl,usbmisc = <&usbmisc 1>;
Peter Chen9493bf52015-09-30 10:17:16 +0800[diff] [blame]576 ahb-burst-config = <0x0>;
Peter Chen2b1a40e2015-09-30 10:17:17 +0800[diff] [blame]577 tx-burst-size-dword = <0x10>;
578 rx-burst-size-dword = <0x10>;
Frank Licad2cb62015-07-17 04:03:16 +0800[diff] [blame]579 status = "disabled";
580 };
581
582 usbmisc: usbmisc@02184800 {
583 #index-cells = <1>;
584 compatible = "fsl,imx6ul-usbmisc", "fsl,imx6q-usbmisc";
585 reg = <0x02184800 0x200>;
586 };
587
Fugang Duan01f3dc72015-07-28 15:30:41 +0800[diff] [blame]588 fec1: ethernet@02188000 {
589 compatible = "fsl,imx6ul-fec", "fsl,imx6q-fec";
590 reg = <0x02188000 0x4000>;
591 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
592 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
593 clocks = <&clks IMX6UL_CLK_ENET>,
594 <&clks IMX6UL_CLK_ENET_AHB>,
595 <&clks IMX6UL_CLK_ENET_PTP>,
596 <&clks IMX6UL_CLK_ENET_REF>,
597 <&clks IMX6UL_CLK_ENET_REF>;
598 clock-names = "ipg", "ahb", "ptp",
599 "enet_clk_ref", "enet_out";
600 fsl,num-tx-queues=<1>;
601 fsl,num-rx-queues=<1>;
602 status = "disabled";
603 };
604
Frank Lia5fcccb2015-07-10 02:09:45 +0800[diff] [blame]605 usdhc1: usdhc@02190000 {
606 compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
607 reg = <0x02190000 0x4000>;
608 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
609 clocks = <&clks IMX6UL_CLK_USDHC1>,
610 <&clks IMX6UL_CLK_USDHC1>,
611 <&clks IMX6UL_CLK_USDHC1>;
612 clock-names = "ipg", "ahb", "per";
613 bus-width = <4>;
614 status = "disabled";
615 };
616
617 usdhc2: usdhc@02194000 {
618 compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
619 reg = <0x02194000 0x4000>;
620 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
621 clocks = <&clks IMX6UL_CLK_USDHC2>,
622 <&clks IMX6UL_CLK_USDHC2>,
623 <&clks IMX6UL_CLK_USDHC2>;
624 clock-names = "ipg", "ahb", "per";
625 bus-width = <4>;
626 status = "disabled";
627 };
628
Fabio Estevamaab8ec02015-11-04 10:54:50 -0200[diff] [blame]629 adc1: adc@02198000 {
630 compatible = "fsl,imx6ul-adc", "fsl,vf610-adc";
631 reg = <0x02198000 0x4000>;
632 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
633 clocks = <&clks IMX6UL_CLK_ADC1>;
634 num-channels = <2>;
635 clock-names = "adc";
636 fsl,adck-max-frequency = <30000000>, <40000000>,
637 <20000000>;
638 status = "disabled";
639 };
640
Frank Lia5fcccb2015-07-10 02:09:45 +0800[diff] [blame]641 i2c1: i2c@021a0000 {
642 #address-cells = <1>;
643 #size-cells = <0>;
644 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
645 reg = <0x021a0000 0x4000>;
646 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
647 clocks = <&clks IMX6UL_CLK_I2C1>;
648 status = "disabled";
649 };
650
651 i2c2: i2c@021a4000 {
652 #address-cells = <1>;
653 #size-cells = <0>;
654 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
655 reg = <0x021a4000 0x4000>;
656 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
657 clocks = <&clks IMX6UL_CLK_I2C2>;
658 status = "disabled";
659 };
660
661 i2c3: i2c@021a8000 {
662 #address-cells = <1>;
663 #size-cells = <0>;
664 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
665 reg = <0x021a8000 0x4000>;
666 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
667 clocks = <&clks IMX6UL_CLK_I2C3>;
668 status = "disabled";
669 };
670
Anson Huang51a37442015-08-05 01:48:36 +0800[diff] [blame]671 mmdc: mmdc@021b0000 {
672 compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc";
673 reg = <0x021b0000 0x4000>;
674 };
675
Frank Li5ff807a2015-07-21 03:33:53 +0800[diff] [blame]676 qspi: qspi@021e0000 {
677 #address-cells = <1>;
678 #size-cells = <0>;
679 compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
680 reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
681 reg-names = "QuadSPI", "QuadSPI-memory";
682 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
683 clocks = <&clks IMX6UL_CLK_QSPI>,
684 <&clks IMX6UL_CLK_QSPI>;
685 clock-names = "qspi_en", "qspi";
686 status = "disabled";
687 };
688
Frank Lia5fcccb2015-07-10 02:09:45 +0800[diff] [blame]689 uart2: serial@021e8000 {
690 compatible = "fsl,imx6ul-uart",
691 "fsl,imx6q-uart";
692 reg = <0x021e8000 0x4000>;
693 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
694 clocks = <&clks IMX6UL_CLK_UART2_IPG>,
695 <&clks IMX6UL_CLK_UART2_SERIAL>;
696 clock-names = "ipg", "per";
697 status = "disabled";
698 };
699
700 uart3: serial@021ec000 {
701 compatible = "fsl,imx6ul-uart",
702 "fsl,imx6q-uart";
703 reg = <0x021ec000 0x4000>;
704 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
705 clocks = <&clks IMX6UL_CLK_UART3_IPG>,
706 <&clks IMX6UL_CLK_UART3_SERIAL>;
707 clock-names = "ipg", "per";
708 status = "disabled";
709 };
710
711 uart4: serial@021f0000 {
712 compatible = "fsl,imx6ul-uart",
713 "fsl,imx6q-uart";
714 reg = <0x021f0000 0x4000>;
715 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
716 clocks = <&clks IMX6UL_CLK_UART4_IPG>,
717 <&clks IMX6UL_CLK_UART4_SERIAL>;
718 clock-names = "ipg", "per";
719 status = "disabled";
720 };
721
722 uart5: serial@021f4000 {
723 compatible = "fsl,imx6ul-uart",
724 "fsl,imx6q-uart";
725 reg = <0x021f4000 0x4000>;
726 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
727 clocks = <&clks IMX6UL_CLK_UART5_IPG>,
728 <&clks IMX6UL_CLK_UART5_SERIAL>;
729 clock-names = "ipg", "per";
730 status = "disabled";
731 };
732
733 i2c4: i2c@021f8000 {
734 #address-cells = <1>;
735 #size-cells = <0>;
736 compatible = "fsl,imx6ul-i2c", "fsl,imx21-i2c";
737 reg = <0x021f8000 0x4000>;
738 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
739 clocks = <&clks IMX6UL_CLK_I2C4>;
740 status = "disabled";
741 };
742
743 uart6: serial@021fc000 {
744 compatible = "fsl,imx6ul-uart",
745 "fsl,imx6q-uart";
746 reg = <0x021fc000 0x4000>;
747 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
748 clocks = <&clks IMX6UL_CLK_UART6_IPG>,
749 <&clks IMX6UL_CLK_UART6_SERIAL>;
750 clock-names = "ipg", "per";
751 status = "disabled";
752 };
753 };
754 };
755};