arch/arm64/boot/dts/arm/juno.dts

/*
 * ARM Ltd. Juno Platform
 *
 * Copyright (c) 2013-2014 ARM Ltd.
 *
 * This file is licensed under a dual GPLv2 or BSD license.
 */

/dts-v1/;

#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "juno-base.dtsi"

/ {
	model = "ARM Juno development board (r0)";
	compatible = "arm,juno", "arm,vexpress";
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	aliases {
		serial0 = &soc_uart0;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	psci {
		compatible = "arm,psci-0.2";
		method = "smc";
	};

	cpus {
		#address-cells = <2>;
		#size-cells = <0>;

		cpu-map {
			cluster0 {
				core0 {
					cpu = <&A57_0>;
				};
				core1 {
					cpu = <&A57_1>;
				};
			};

			cluster1 {
				core0 {
					cpu = <&A53_0>;
				};
				core1 {
					cpu = <&A53_1>;
				};
				core2 {
					cpu = <&A53_2>;
				};
				core3 {
					cpu = <&A53_3>;
				};
			};
		};

		idle-states {
			entry-method = "arm,psci";

			CPU_SLEEP_0: cpu-sleep-0 {
				compatible = "arm,idle-state";
				arm,psci-suspend-param = <0x0010000>;
				local-timer-stop;
				entry-latency-us = <300>;
				exit-latency-us = <1200>;
				min-residency-us = <2000>;
			};

			CLUSTER_SLEEP_0: cluster-sleep-0 {
				compatible = "arm,idle-state";
				arm,psci-suspend-param = <0x1010000>;
				local-timer-stop;
				entry-latency-us = <400>;
				exit-latency-us = <1200>;
				min-residency-us = <2500>;
			};
		};

		A57_0: cpu@0 {
			compatible = "arm,cortex-a57","arm,armv8";
			reg = <0x0 0x0>;
			device_type = "cpu";
			enable-method = "psci";
			next-level-cache = <&A57_L2>;
			clocks = <&scpi_dvfs 0>;
			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
			capacity-dmips-mhz = <1024>;
		};

		A57_1: cpu@1 {
			compatible = "arm,cortex-a57","arm,armv8";
			reg = <0x0 0x1>;
			device_type = "cpu";
			enable-method = "psci";
			next-level-cache = <&A57_L2>;
			clocks = <&scpi_dvfs 0>;
			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
			capacity-dmips-mhz = <1024>;
		};

		A53_0: cpu@100 {
			compatible = "arm,cortex-a53","arm,armv8";
			reg = <0x0 0x100>;
			device_type = "cpu";
			enable-method = "psci";
			next-level-cache = <&A53_L2>;
			clocks = <&scpi_dvfs 1>;
			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
			capacity-dmips-mhz = <578>;
		};

		A53_1: cpu@101 {
			compatible = "arm,cortex-a53","arm,armv8";
			reg = <0x0 0x101>;
			device_type = "cpu";
			enable-method = "psci";
			next-level-cache = <&A53_L2>;
			clocks = <&scpi_dvfs 1>;
			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
			capacity-dmips-mhz = <578>;
		};

		A53_2: cpu@102 {
			compatible = "arm,cortex-a53","arm,armv8";
			reg = <0x0 0x102>;
			device_type = "cpu";
			enable-method = "psci";
			next-level-cache = <&A53_L2>;
			clocks = <&scpi_dvfs 1>;
			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
			capacity-dmips-mhz = <578>;
		};

		A53_3: cpu@103 {
			compatible = "arm,cortex-a53","arm,armv8";
			reg = <0x0 0x103>;
			device_type = "cpu";
			enable-method = "psci";
			next-level-cache = <&A53_L2>;
			clocks = <&scpi_dvfs 1>;
			cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
			capacity-dmips-mhz = <578>;
		};

		A57_L2: l2-cache0 {
			compatible = "cache";
		};

		A53_L2: l2-cache1 {
			compatible = "cache";
		};
	};

	pmu_a57 {
		compatible = "arm,cortex-a57-pmu";
		interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-affinity = <&A57_0>,
				     <&A57_1>;
	};

	pmu_a53 {
		compatible = "arm,cortex-a53-pmu";
		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-affinity = <&A53_0>,
				     <&A53_1>,
				     <&A53_2>,
				     <&A53_3>;
	};
};

&etm0 {
	cpu = <&A57_0>;
};

&etm1 {
	cpu = <&A57_1>;
};

&etm2 {
	cpu = <&A53_0>;
};

&etm3 {
	cpu = <&A53_1>;
};

&etm4 {
	cpu = <&A53_2>;
};

&etm5 {
	cpu = <&A53_3>;
};

&etf0_out_port {
	remote-endpoint = <&replicator_in_port0>;
};

&replicator_in_port0 {
	remote-endpoint = <&etf0_out_port>;
};