Gitiles
Code Review Sign In
gerrit-public.fairphone.software / kernel / msm-5.4 / ce0f706e418dbd65f59b340486869f81de757751 / . / arch / arm / boot / dts / imx28-apf28dev.dts
blob: 6d8865bfb4b7cee90b12910d98f46a1e6acda564 [file] [log] [blame]
Gwenhael Goavec-Merou414b4152012-10-31 18:39:26 +0100[diff] [blame]1/*
2 * Copyright 2012 Armadeus Systems - <support@armadeus.com>
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12/* APF28Dev is a docking board for the APF28 SOM */
13/include/ "imx28-apf28.dts"
14
15/ {
16 model = "Armadeus Systems APF28Dev docking/development board";
17 compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
18
19 apb@80000000 {
20 apbh@80000000 {
21 ssp0: ssp@80010000 {
22 compatible = "fsl,imx28-mmc";
23 pinctrl-names = "default";
24 pinctrl-0 = <&mmc0_4bit_pins_a
25 &mmc0_cd_cfg &mmc0_sck_cfg>;
26 bus-width = <4>;
27 status = "okay";
28 };
Gwenhael Goavec-Merou24acd6b2012-11-02 19:01:47 +0100[diff] [blame]29
Gwenhael Goavec-Merouac8e44c2012-11-09 13:42:41 +0100[diff] [blame]30 ssp2: ssp@80014000 {
31 compatible = "fsl,imx28-spi";
32 pinctrl-names = "default";
33 pinctrl-0 = <&spi2_pins_a>;
34 status = "okay";
35 };
36
Gwenhael Goavec-Merou24acd6b2012-11-02 19:01:47 +0100[diff] [blame]37 pinctrl@80018000 {
38 pinctrl-names = "default";
39 pinctrl-0 = <&hog_pins_apf28dev>;
40
41 hog_pins_apf28dev: hog@0 {
42 reg = <0>;
43 fsl,pinmux-ids = <
44 0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */
45 0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */
46 0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */
47 0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */
48 0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */
49 0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */
50 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
51 >;
52 fsl,drive-strength = <0>;
53 fsl,voltage = <1>;
54 fsl,pull-up = <0>;
55 };
Gwenhael Goavec-Meroua4dabca2012-11-02 19:01:48 +0100[diff] [blame]56
57 lcdif_pins_apf28dev: lcdif-apf28dev@0 {
58 reg = <0>;
59 fsl,pinmux-ids = <
60 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
61 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
62 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
63 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
64 >;
65 fsl,drive-strength = <0>;
66 fsl,voltage = <1>;
67 fsl,pull-up = <0>;
68 };
69 };
70
71 lcdif@80030000 {
72 pinctrl-names = "default";
73 pinctrl-0 = <&lcdif_16bit_pins_a
74 &lcdif_pins_apf28dev>;
75 status = "okay";
Gwenhael Goavec-Merou24acd6b2012-11-02 19:01:47 +0100[diff] [blame]76 };
Gwenhael Goavec-Merou414b4152012-10-31 18:39:26 +0100[diff] [blame]77 };
78
79 apbx@80040000 {
80 lradc@80050000 {
81 status = "okay";
82 };
83
Gwenhael Goavec-Merouac8e44c2012-11-09 13:42:41 +0100[diff] [blame]84 i2c0: i2c@80058000 {
85 pinctrl-names = "default";
86 pinctrl-0 = <&i2c0_pins_a>;
87 status = "okay";
88 };
89
Gwenhael Goavec-Merou414b4152012-10-31 18:39:26 +0100[diff] [blame]90 pwm: pwm@80064000 {
91 pinctrl-names = "default";
92 pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
93 status = "okay";
94 };
95
96 usbphy0: usbphy@8007c000 {
97 status = "okay";
98 };
99
100 usbphy1: usbphy@8007e000 {
101 status = "okay";
102 };
103 };
104 };
105
106 ahb@80080000 {
107 usb0: usb@80080000 {
108 vbus-supply = <&reg_usb0_vbus>;
109 status = "okay";
110 };
111
112 usb1: usb@80090000 {
113 status = "okay";
114 };
115
116 mac1: ethernet@800f4000 {
117 phy-mode = "rmii";
118 pinctrl-names = "default";
119 pinctrl-0 = <&mac1_pins_a>;
120 phy-reset-gpios = <&gpio0 23 0>;
121 status = "okay";
122 };
123 };
124
125 regulators {
126 compatible = "simple-bus";
127
128 reg_usb0_vbus: usb0_vbus {
129 compatible = "regulator-fixed";
130 regulator-name = "usb0_vbus";
131 regulator-min-microvolt = <5000000>;
132 regulator-max-microvolt = <5000000>;
133 gpio = <&gpio1 23 1>;
134 };
135 };
136
137 leds {
138 compatible = "gpio-leds";
139
140 user {
141 label = "Heartbeat";
142 gpios = <&gpio0 21 0>;
143 linux,default-trigger = "heartbeat";
144 };
145 };
Gwenhael Goavec-Meroua4dabca2012-11-02 19:01:48 +0100[diff] [blame]146
147 backlight {
148 compatible = "pwm-backlight";
149
150 pwms = <&pwm 3 191000>;
151 brightness-levels = <0 4 8 16 32 64 128 255>;
152 default-brightness-level = <6>;
153 };
Gwenhael Goavec-Merou414b4152012-10-31 18:39:26 +0100[diff] [blame]154};