Stephen Warren | 1a94715 | 2013-01-02 22:34:49 -0700 | [diff] [blame] | 1 | /* |
| 2 | * BCM2835 SDHCI |
| 3 | * Copyright (C) 2012 Stephen Warren |
| 4 | * Based on U-Boot's MMC driver for the BCM2835 by Oleksandr Tymoshenko & me |
| 5 | * Portions of the code there were obviously based on the Linux kernel at: |
| 6 | * git://github.com/raspberrypi/linux.git rpi-3.6.y |
| 7 | * commit f5b930b "Main bcm2708 linux port" signed-off-by Dom Cobley. |
| 8 | * |
| 9 | * This program is free software; you can redistribute it and/or modify it |
| 10 | * under the terms and conditions of the GNU General Public License, |
| 11 | * version 2, as published by the Free Software Foundation. |
| 12 | * |
| 13 | * This program is distributed in the hope it will be useful, but WITHOUT |
| 14 | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| 15 | * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| 16 | * more details. |
| 17 | * |
| 18 | * You should have received a copy of the GNU General Public License |
| 19 | * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| 20 | */ |
| 21 | |
| 22 | #include <linux/delay.h> |
| 23 | #include <linux/module.h> |
| 24 | #include <linux/mmc/host.h> |
| 25 | #include "sdhci-pltfm.h" |
| 26 | |
| 27 | /* |
| 28 | * 400KHz is max freq for card ID etc. Use that as min card clock. We need to |
| 29 | * know the min to enable static calculation of max BCM2835_SDHCI_WRITE_DELAY. |
| 30 | */ |
| 31 | #define MIN_FREQ 400000 |
| 32 | |
| 33 | /* |
| 34 | * The Arasan has a bugette whereby it may lose the content of successive |
| 35 | * writes to registers that are within two SD-card clock cycles of each other |
| 36 | * (a clock domain crossing problem). It seems, however, that the data |
| 37 | * register does not have this problem, which is just as well - otherwise we'd |
| 38 | * have to nobble the DMA engine too. |
| 39 | * |
| 40 | * This should probably be dynamically calculated based on the actual card |
| 41 | * frequency. However, this is the longest we'll have to wait, and doesn't |
| 42 | * seem to slow access down too much, so the added complexity doesn't seem |
| 43 | * worth it for now. |
| 44 | * |
| 45 | * 1/MIN_FREQ is (max) time per tick of eMMC clock. |
| 46 | * 2/MIN_FREQ is time for two ticks. |
| 47 | * Multiply by 1000000 to get uS per two ticks. |
| 48 | * *1000000 for uSecs. |
| 49 | * +1 for hack rounding. |
| 50 | */ |
| 51 | #define BCM2835_SDHCI_WRITE_DELAY (((2 * 1000000) / MIN_FREQ) + 1) |
| 52 | |
| 53 | struct bcm2835_sdhci { |
| 54 | struct clk *clk; |
| 55 | u32 shadow; |
| 56 | }; |
| 57 | |
| 58 | static void bcm2835_sdhci_writel(struct sdhci_host *host, u32 val, int reg) |
| 59 | { |
| 60 | writel(val, host->ioaddr + reg); |
| 61 | |
| 62 | udelay(BCM2835_SDHCI_WRITE_DELAY); |
| 63 | } |
| 64 | |
| 65 | static inline u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg) |
| 66 | { |
| 67 | u32 val = readl(host->ioaddr + reg); |
| 68 | |
| 69 | if (reg == SDHCI_CAPABILITIES) |
| 70 | val |= SDHCI_CAN_VDD_330; |
| 71 | |
| 72 | return val; |
| 73 | } |
| 74 | |
| 75 | static void bcm2835_sdhci_writew(struct sdhci_host *host, u16 val, int reg) |
| 76 | { |
| 77 | struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| 78 | struct bcm2835_sdhci *bcm2835_host = pltfm_host->priv; |
| 79 | u32 oldval = (reg == SDHCI_COMMAND) ? bcm2835_host->shadow : |
| 80 | bcm2835_sdhci_readl(host, reg & ~3); |
| 81 | u32 word_num = (reg >> 1) & 1; |
| 82 | u32 word_shift = word_num * 16; |
| 83 | u32 mask = 0xffff << word_shift; |
| 84 | u32 newval = (oldval & ~mask) | (val << word_shift); |
| 85 | |
| 86 | if (reg == SDHCI_TRANSFER_MODE) |
| 87 | bcm2835_host->shadow = newval; |
| 88 | else |
| 89 | bcm2835_sdhci_writel(host, newval, reg & ~3); |
| 90 | } |
| 91 | |
| 92 | static u16 bcm2835_sdhci_readw(struct sdhci_host *host, int reg) |
| 93 | { |
| 94 | u32 val = bcm2835_sdhci_readl(host, (reg & ~3)); |
| 95 | u32 word_num = (reg >> 1) & 1; |
| 96 | u32 word_shift = word_num * 16; |
| 97 | u32 word = (val >> word_shift) & 0xffff; |
| 98 | |
| 99 | return word; |
| 100 | } |
| 101 | |
| 102 | static void bcm2835_sdhci_writeb(struct sdhci_host *host, u8 val, int reg) |
| 103 | { |
| 104 | u32 oldval = bcm2835_sdhci_readl(host, reg & ~3); |
| 105 | u32 byte_num = reg & 3; |
| 106 | u32 byte_shift = byte_num * 8; |
| 107 | u32 mask = 0xff << byte_shift; |
| 108 | u32 newval = (oldval & ~mask) | (val << byte_shift); |
| 109 | |
| 110 | bcm2835_sdhci_writel(host, newval, reg & ~3); |
| 111 | } |
| 112 | |
| 113 | static u8 bcm2835_sdhci_readb(struct sdhci_host *host, int reg) |
| 114 | { |
| 115 | u32 val = bcm2835_sdhci_readl(host, (reg & ~3)); |
| 116 | u32 byte_num = reg & 3; |
| 117 | u32 byte_shift = byte_num * 8; |
| 118 | u32 byte = (val >> byte_shift) & 0xff; |
| 119 | |
| 120 | return byte; |
| 121 | } |
| 122 | |
| 123 | static unsigned int bcm2835_sdhci_get_max_clock(struct sdhci_host *host) |
| 124 | { |
| 125 | struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| 126 | struct bcm2835_sdhci *bcm2835_host = pltfm_host->priv; |
| 127 | |
| 128 | return clk_get_rate(bcm2835_host->clk); |
| 129 | } |
| 130 | |
| 131 | unsigned int bcm2835_sdhci_get_min_clock(struct sdhci_host *host) |
| 132 | { |
| 133 | return MIN_FREQ; |
| 134 | } |
| 135 | |
| 136 | unsigned int bcm2835_sdhci_get_timeout_clock(struct sdhci_host *host) |
| 137 | { |
| 138 | struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); |
| 139 | struct bcm2835_sdhci *bcm2835_host = pltfm_host->priv; |
| 140 | |
| 141 | return clk_get_rate(bcm2835_host->clk); |
| 142 | } |
| 143 | |
| 144 | static struct sdhci_ops bcm2835_sdhci_ops = { |
| 145 | .write_l = bcm2835_sdhci_writel, |
| 146 | .write_w = bcm2835_sdhci_writew, |
| 147 | .write_b = bcm2835_sdhci_writeb, |
| 148 | .read_l = bcm2835_sdhci_readl, |
| 149 | .read_w = bcm2835_sdhci_readw, |
| 150 | .read_b = bcm2835_sdhci_readb, |
| 151 | .get_max_clock = bcm2835_sdhci_get_max_clock, |
| 152 | .get_min_clock = bcm2835_sdhci_get_min_clock, |
| 153 | .get_timeout_clock = bcm2835_sdhci_get_timeout_clock, |
| 154 | }; |
| 155 | |
| 156 | static struct sdhci_pltfm_data bcm2835_sdhci_pdata = { |
| 157 | .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION, |
| 158 | .ops = &bcm2835_sdhci_ops, |
| 159 | }; |
| 160 | |
| 161 | static int bcm2835_sdhci_probe(struct platform_device *pdev) |
| 162 | { |
| 163 | struct sdhci_host *host; |
| 164 | struct bcm2835_sdhci *bcm2835_host; |
| 165 | struct sdhci_pltfm_host *pltfm_host; |
| 166 | int ret; |
| 167 | |
| 168 | host = sdhci_pltfm_init(pdev, &bcm2835_sdhci_pdata); |
| 169 | if (IS_ERR(host)) |
| 170 | return PTR_ERR(host); |
| 171 | |
| 172 | bcm2835_host = devm_kzalloc(&pdev->dev, sizeof(*bcm2835_host), |
| 173 | GFP_KERNEL); |
| 174 | if (!bcm2835_host) { |
| 175 | dev_err(mmc_dev(host->mmc), |
| 176 | "failed to allocate bcm2835_sdhci\n"); |
| 177 | return -ENOMEM; |
| 178 | } |
| 179 | |
| 180 | pltfm_host = sdhci_priv(host); |
| 181 | pltfm_host->priv = bcm2835_host; |
| 182 | |
| 183 | bcm2835_host->clk = devm_clk_get(&pdev->dev, NULL); |
| 184 | if (IS_ERR(bcm2835_host->clk)) { |
| 185 | ret = PTR_ERR(bcm2835_host->clk); |
| 186 | goto err; |
| 187 | } |
| 188 | |
| 189 | return sdhci_add_host(host); |
| 190 | |
| 191 | err: |
| 192 | sdhci_pltfm_free(pdev); |
| 193 | return ret; |
| 194 | } |
| 195 | |
| 196 | static int bcm2835_sdhci_remove(struct platform_device *pdev) |
| 197 | { |
| 198 | struct sdhci_host *host = platform_get_drvdata(pdev); |
| 199 | int dead = (readl(host->ioaddr + SDHCI_INT_STATUS) == 0xffffffff); |
| 200 | |
| 201 | sdhci_remove_host(host, dead); |
| 202 | sdhci_pltfm_free(pdev); |
| 203 | |
| 204 | return 0; |
| 205 | } |
| 206 | |
| 207 | static const struct of_device_id bcm2835_sdhci_of_match[] = { |
| 208 | { .compatible = "brcm,bcm2835-sdhci" }, |
| 209 | { } |
| 210 | }; |
| 211 | MODULE_DEVICE_TABLE(of, bcm2835_sdhci_of_match); |
| 212 | |
| 213 | static struct platform_driver bcm2835_sdhci_driver = { |
| 214 | .driver = { |
| 215 | .name = "sdhci-bcm2835", |
| 216 | .owner = THIS_MODULE, |
| 217 | .of_match_table = bcm2835_sdhci_of_match, |
| 218 | .pm = SDHCI_PLTFM_PMOPS, |
| 219 | }, |
| 220 | .probe = bcm2835_sdhci_probe, |
| 221 | .remove = bcm2835_sdhci_remove, |
| 222 | }; |
| 223 | module_platform_driver(bcm2835_sdhci_driver); |
| 224 | |
| 225 | MODULE_DESCRIPTION("BCM2835 SDHCI driver"); |
| 226 | MODULE_AUTHOR("Stephen Warren"); |
| 227 | MODULE_LICENSE("GPL v2"); |