blob: 11e6483fc1276013e92234cb1c19538d6b09994a [file] [log] [blame]
Kiran Patil3699d922011-04-18 16:24:14 -07001/*
2 * Copyright (c) 2010 Cisco Systems, Inc.
3 *
4 * Portions based on tcm_loop_fabric_scsi.c and libfc/fc_fcp.c
5 *
6 * Copyright (c) 2007 Intel Corporation. All rights reserved.
7 * Copyright (c) 2008 Red Hat, Inc. All rights reserved.
8 * Copyright (c) 2008 Mike Christie
9 * Copyright (c) 2009 Rising Tide, Inc.
10 * Copyright (c) 2009 Linux-iSCSI.org
11 * Copyright (c) 2009 Nicholas A. Bellinger <nab@linux-iscsi.org>
12 *
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms and conditions of the GNU General Public License,
15 * version 2, as published by the Free Software Foundation.
16 *
17 * This program is distributed in the hope it will be useful, but WITHOUT
18 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
19 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
20 * more details.
21 *
22 * You should have received a copy of the GNU General Public License along with
23 * this program; if not, write to the Free Software Foundation, Inc.,
24 * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
25 */
26
27/* XXX TBD some includes may be extraneous */
28
29#include <linux/module.h>
30#include <linux/moduleparam.h>
31#include <linux/version.h>
32#include <generated/utsrelease.h>
33#include <linux/utsname.h>
34#include <linux/init.h>
35#include <linux/slab.h>
36#include <linux/kthread.h>
37#include <linux/types.h>
38#include <linux/string.h>
39#include <linux/configfs.h>
40#include <linux/ctype.h>
41#include <linux/hash.h>
Andy Grover6708bb22011-06-08 10:36:43 -070042#include <linux/ratelimit.h>
Kiran Patil3699d922011-04-18 16:24:14 -070043#include <asm/unaligned.h>
44#include <scsi/scsi.h>
45#include <scsi/scsi_host.h>
46#include <scsi/scsi_device.h>
47#include <scsi/scsi_cmnd.h>
48#include <scsi/libfc.h>
49#include <scsi/fc_encode.h>
50
51#include <target/target_core_base.h>
52#include <target/target_core_transport.h>
53#include <target/target_core_fabric_ops.h>
54#include <target/target_core_device.h>
55#include <target/target_core_tpg.h>
56#include <target/target_core_configfs.h>
57#include <target/target_core_base.h>
58#include <target/configfs_macros.h>
59
60#include "tcm_fc.h"
61
62/*
63 * Deliver read data back to initiator.
64 * XXX TBD handle resource problems later.
65 */
66int ft_queue_data_in(struct se_cmd *se_cmd)
67{
68 struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
Kiran Patil3699d922011-04-18 16:24:14 -070069 struct fc_frame *fp = NULL;
70 struct fc_exch *ep;
71 struct fc_lport *lport;
Andy Groverec98f782011-07-20 19:28:46 +000072 struct scatterlist *sg = NULL;
Kiran Patil3699d922011-04-18 16:24:14 -070073 size_t remaining;
74 u32 f_ctl = FC_FC_EX_CTX | FC_FC_REL_OFF;
Andy Groverec98f782011-07-20 19:28:46 +000075 u32 mem_off = 0;
Kiran Patil3699d922011-04-18 16:24:14 -070076 u32 fh_off = 0;
77 u32 frame_off = 0;
78 size_t frame_len = 0;
Andy Groverec98f782011-07-20 19:28:46 +000079 size_t mem_len = 0;
Kiran Patil3699d922011-04-18 16:24:14 -070080 size_t tlen;
81 size_t off_in_page;
Andy Groverec98f782011-07-20 19:28:46 +000082 struct page *page = NULL;
Kiran Patil3699d922011-04-18 16:24:14 -070083 int use_sg;
84 int error;
85 void *page_addr;
86 void *from;
87 void *to = NULL;
88
89 ep = fc_seq_exch(cmd->seq);
90 lport = ep->lp;
91 cmd->seq = lport->tt.seq_start_next(cmd->seq);
92
Kiran Patil3699d922011-04-18 16:24:14 -070093 remaining = se_cmd->data_length;
94
95 /*
Andy Grover05d1c7c2011-07-20 19:13:28 +000096 * Setup to use first mem list entry, unless no data.
Kiran Patil3699d922011-04-18 16:24:14 -070097 */
Andy Groverec98f782011-07-20 19:28:46 +000098 BUG_ON(remaining && !se_cmd->t_data_sg);
Andy Grover05d1c7c2011-07-20 19:13:28 +000099 if (remaining) {
Andy Groverec98f782011-07-20 19:28:46 +0000100 sg = se_cmd->t_data_sg;
101 mem_len = sg->length;
102 mem_off = sg->offset;
103 page = sg_page(sg);
Kiran Patil3699d922011-04-18 16:24:14 -0700104 }
105
106 /* no scatter/gather in skb for odd word length due to fc_seq_send() */
107 use_sg = !(remaining % 4);
108
109 while (remaining) {
110 if (!mem_len) {
Andy Groverec98f782011-07-20 19:28:46 +0000111 sg = sg_next(sg);
112 mem_len = min((size_t)sg->length, remaining);
113 mem_off = sg->offset;
114 page = sg_page(sg);
Kiran Patil3699d922011-04-18 16:24:14 -0700115 }
116 if (!frame_len) {
117 /*
118 * If lport's has capability of Large Send Offload LSO)
119 * , then allow 'frame_len' to be as big as 'lso_max'
120 * if indicated transfer length is >= lport->lso_max
121 */
122 frame_len = (lport->seq_offload) ? lport->lso_max :
123 cmd->sess->max_frame;
124 frame_len = min(frame_len, remaining);
125 fp = fc_frame_alloc(lport, use_sg ? 0 : frame_len);
126 if (!fp)
127 return -ENOMEM;
128 to = fc_frame_payload_get(fp, 0);
129 fh_off = frame_off;
130 frame_off += frame_len;
131 /*
132 * Setup the frame's max payload which is used by base
133 * driver to indicate HW about max frame size, so that
134 * HW can do fragmentation appropriately based on
135 * "gso_max_size" of underline netdev.
136 */
137 fr_max_payload(fp) = cmd->sess->max_frame;
138 }
139 tlen = min(mem_len, frame_len);
140
141 if (use_sg) {
Andy Grover05d1c7c2011-07-20 19:13:28 +0000142 off_in_page = mem_off;
Kiran Patil3699d922011-04-18 16:24:14 -0700143 BUG_ON(!page);
144 get_page(page);
145 skb_fill_page_desc(fp_skb(fp),
146 skb_shinfo(fp_skb(fp))->nr_frags,
147 page, off_in_page, tlen);
148 fr_len(fp) += tlen;
149 fp_skb(fp)->data_len += tlen;
150 fp_skb(fp)->truesize +=
151 PAGE_SIZE << compound_order(page);
Andy Grover05d1c7c2011-07-20 19:13:28 +0000152 } else {
Kiran Patil3699d922011-04-18 16:24:14 -0700153 BUG_ON(!page);
154 from = kmap_atomic(page + (mem_off >> PAGE_SHIFT),
155 KM_SOFTIRQ0);
156 page_addr = from;
157 from += mem_off & ~PAGE_MASK;
158 tlen = min(tlen, (size_t)(PAGE_SIZE -
159 (mem_off & ~PAGE_MASK)));
160 memcpy(to, from, tlen);
161 kunmap_atomic(page_addr, KM_SOFTIRQ0);
162 to += tlen;
Kiran Patil3699d922011-04-18 16:24:14 -0700163 }
164
165 mem_off += tlen;
166 mem_len -= tlen;
167 frame_len -= tlen;
168 remaining -= tlen;
169
170 if (frame_len &&
171 (skb_shinfo(fp_skb(fp))->nr_frags < FC_FRAME_SG_LEN))
172 continue;
173 if (!remaining)
174 f_ctl |= FC_FC_END_SEQ;
175 fc_fill_fc_hdr(fp, FC_RCTL_DD_SOL_DATA, ep->did, ep->sid,
176 FC_TYPE_FCP, f_ctl, fh_off);
177 error = lport->tt.seq_send(lport, cmd->seq, fp);
178 if (error) {
179 /* XXX For now, initiator will retry */
Andy Grover6708bb22011-06-08 10:36:43 -0700180 pr_err_ratelimited("%s: Failed to send frame %p, "
Nicholas Bellinger95efa282011-06-23 23:28:46 +0000181 "xid <0x%x>, remaining %zu, "
Kiran Patil3699d922011-04-18 16:24:14 -0700182 "lso_max <0x%x>\n",
183 __func__, fp, ep->xid,
184 remaining, lport->lso_max);
185 }
186 }
187 return ft_queue_status(se_cmd);
188}
189
190/*
191 * Receive write data frame.
192 */
193void ft_recv_write_data(struct ft_cmd *cmd, struct fc_frame *fp)
194{
195 struct se_cmd *se_cmd = &cmd->se_cmd;
196 struct fc_seq *seq = cmd->seq;
197 struct fc_exch *ep;
198 struct fc_lport *lport;
Kiran Patil3699d922011-04-18 16:24:14 -0700199 struct fc_frame_header *fh;
Andy Groverec98f782011-07-20 19:28:46 +0000200 struct scatterlist *sg = NULL;
201 u32 mem_off = 0;
Kiran Patil3699d922011-04-18 16:24:14 -0700202 u32 rel_off;
203 size_t frame_len;
Andy Groverec98f782011-07-20 19:28:46 +0000204 size_t mem_len = 0;
Kiran Patil3699d922011-04-18 16:24:14 -0700205 size_t tlen;
Andy Groverec98f782011-07-20 19:28:46 +0000206 struct page *page = NULL;
Kiran Patil3699d922011-04-18 16:24:14 -0700207 void *page_addr;
208 void *from;
209 void *to;
210 u32 f_ctl;
211 void *buf;
212
Kiran Patil3699d922011-04-18 16:24:14 -0700213 fh = fc_frame_header_get(fp);
214 if (!(ntoh24(fh->fh_f_ctl) & FC_FC_REL_OFF))
215 goto drop;
216
217 /*
218 * Doesn't expect even single byte of payload. Payload
219 * is expected to be copied directly to user buffers
220 * due to DDP (Large Rx offload) feature, hence
221 * BUG_ON if BUF is non-NULL
222 */
223 buf = fc_frame_payload_get(fp, 1);
224 if (cmd->was_ddp_setup && buf) {
Andy Grover6708bb22011-06-08 10:36:43 -0700225 pr_debug("%s: When DDP was setup, not expected to"
Kiran Patil3699d922011-04-18 16:24:14 -0700226 "receive frame with payload, Payload shall be"
227 "copied directly to buffer instead of coming "
228 "via. legacy receive queues\n", __func__);
229 BUG_ON(buf);
230 }
231
232 /*
233 * If ft_cmd indicated 'ddp_setup', in that case only the last frame
234 * should come with 'TSI bit being set'. If 'TSI bit is not set and if
235 * data frame appears here, means error condition. In both the cases
236 * release the DDP context (ddp_put) and in error case, as well
237 * initiate error recovery mechanism.
238 */
239 ep = fc_seq_exch(seq);
240 if (cmd->was_ddp_setup) {
241 BUG_ON(!ep);
242 lport = ep->lp;
243 BUG_ON(!lport);
244 }
245 if (cmd->was_ddp_setup && ep->xid != FC_XID_UNKNOWN) {
246 f_ctl = ntoh24(fh->fh_f_ctl);
247 /*
248 * If TSI bit set in f_ctl, means last write data frame is
249 * received successfully where payload is posted directly
250 * to user buffer and only the last frame's header is posted
251 * in legacy receive queue
252 */
253 if (f_ctl & FC_FC_SEQ_INIT) { /* TSI bit set in FC frame */
254 cmd->write_data_len = lport->tt.ddp_done(lport,
255 ep->xid);
256 goto last_frame;
257 } else {
258 /*
259 * Updating the write_data_len may be meaningless at
260 * this point, but just in case if required in future
261 * for debugging or any other purpose
262 */
Andy Grover6708bb22011-06-08 10:36:43 -0700263 pr_err("%s: Received frame with TSI bit not"
Kiran Patil3699d922011-04-18 16:24:14 -0700264 " being SET, dropping the frame, "
265 "cmd->sg <%p>, cmd->sg_cnt <0x%x>\n",
266 __func__, cmd->sg, cmd->sg_cnt);
267 cmd->write_data_len = lport->tt.ddp_done(lport,
268 ep->xid);
269 lport->tt.seq_exch_abort(cmd->seq, 0);
270 goto drop;
271 }
272 }
273
274 rel_off = ntohl(fh->fh_parm_offset);
275 frame_len = fr_len(fp);
276 if (frame_len <= sizeof(*fh))
277 goto drop;
278 frame_len -= sizeof(*fh);
279 from = fc_frame_payload_get(fp, 0);
280 if (rel_off >= se_cmd->data_length)
281 goto drop;
282 if (frame_len + rel_off > se_cmd->data_length)
283 frame_len = se_cmd->data_length - rel_off;
284
285 /*
Andy Grover05d1c7c2011-07-20 19:13:28 +0000286 * Setup to use first mem list entry, unless no data.
Kiran Patil3699d922011-04-18 16:24:14 -0700287 */
Andy Groverec98f782011-07-20 19:28:46 +0000288 BUG_ON(frame_len && !se_cmd->t_data_sg);
Andy Grover05d1c7c2011-07-20 19:13:28 +0000289 if (frame_len) {
Andy Groverec98f782011-07-20 19:28:46 +0000290 sg = se_cmd->t_data_sg;
291 mem_len = sg->length;
292 mem_off = sg->offset;
293 page = sg_page(sg);
Kiran Patil3699d922011-04-18 16:24:14 -0700294 }
295
296 while (frame_len) {
297 if (!mem_len) {
Andy Groverec98f782011-07-20 19:28:46 +0000298 sg = sg_next(sg);
299 mem_len = sg->length;
300 mem_off = sg->offset;
301 page = sg_page(sg);
Kiran Patil3699d922011-04-18 16:24:14 -0700302 }
303 if (rel_off >= mem_len) {
304 rel_off -= mem_len;
305 mem_len = 0;
306 continue;
307 }
308 mem_off += rel_off;
309 mem_len -= rel_off;
310 rel_off = 0;
311
312 tlen = min(mem_len, frame_len);
313
Andy Grover05d1c7c2011-07-20 19:13:28 +0000314 to = kmap_atomic(page + (mem_off >> PAGE_SHIFT),
315 KM_SOFTIRQ0);
316 page_addr = to;
317 to += mem_off & ~PAGE_MASK;
318 tlen = min(tlen, (size_t)(PAGE_SIZE -
319 (mem_off & ~PAGE_MASK)));
320 memcpy(to, from, tlen);
321 kunmap_atomic(page_addr, KM_SOFTIRQ0);
322
Kiran Patil3699d922011-04-18 16:24:14 -0700323 from += tlen;
324 frame_len -= tlen;
325 mem_off += tlen;
326 mem_len -= tlen;
327 cmd->write_data_len += tlen;
328 }
329last_frame:
330 if (cmd->write_data_len == se_cmd->data_length)
331 transport_generic_handle_data(se_cmd);
332drop:
333 fc_frame_free(fp);
334}