| Vitaly Bordug | e02f73e | 2006-10-02 22:22:36 +0400 | [diff] [blame^] | 1 | /* |
| 2 | * MPC8272 ADS Device Tree Source |
| 3 | * |
| 4 | * Copyright 2005 Freescale Semiconductor Inc. |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or modify it |
| 7 | * under the terms of the GNU General Public License as published by the |
| 8 | * Free Software Foundation; either version 2 of the License, or (at your |
| 9 | * option) any later version. |
| 10 | */ |
| 11 | |
| 12 | / { |
| 13 | model = "MPC8272ADS"; |
| 14 | compatible = "MPC8260ADS"; |
| 15 | #address-cells = <1>; |
| 16 | #size-cells = <1>; |
| 17 | linux,phandle = <100>; |
| 18 | |
| 19 | cpus { |
| 20 | #cpus = <1>; |
| 21 | #address-cells = <1>; |
| 22 | #size-cells = <0>; |
| 23 | linux,phandle = <200>; |
| 24 | |
| 25 | PowerPC,8272@0 { |
| 26 | device_type = "cpu"; |
| 27 | reg = <0>; |
| 28 | d-cache-line-size = <20>; // 32 bytes |
| 29 | i-cache-line-size = <20>; // 32 bytes |
| 30 | d-cache-size = <4000>; // L1, 16K |
| 31 | i-cache-size = <4000>; // L1, 16K |
| 32 | timebase-frequency = <0>; |
| 33 | bus-frequency = <0>; |
| 34 | clock-frequency = <0>; |
| 35 | 32-bit; |
| 36 | linux,phandle = <201>; |
| 37 | linux,boot-cpu; |
| 38 | }; |
| 39 | }; |
| 40 | |
| 41 | interrupt-controller@f8200000 { |
| 42 | linux,phandle = <f8200000>; |
| 43 | #address-cells = <0>; |
| 44 | #interrupt-cells = <2>; |
| 45 | interrupt-controller; |
| 46 | reg = <f8200000 f8200004>; |
| 47 | built-in; |
| 48 | device_type = "pci-pic"; |
| 49 | }; |
| 50 | memory { |
| 51 | device_type = "memory"; |
| 52 | linux,phandle = <300>; |
| 53 | reg = <00000000 4000000 f4500000 00000020>; |
| 54 | }; |
| 55 | |
| 56 | soc8272@f0000000 { |
| 57 | #address-cells = <1>; |
| 58 | #size-cells = <1>; |
| 59 | #interrupt-cells = <2>; |
| 60 | device_type = "soc"; |
| 61 | ranges = < 0 0 2 00000000 f0000000 00053000>; |
| 62 | reg = <f0000000 0>; |
| 63 | |
| 64 | mdio@0 { |
| 65 | device_type = "mdio"; |
| 66 | compatible = "fs_enet"; |
| 67 | reg = <0 0>; |
| 68 | linux,phandle = <24520>; |
| 69 | #address-cells = <1>; |
| 70 | #size-cells = <0>; |
| 71 | ethernet-phy@0 { |
| 72 | linux,phandle = <2452000>; |
| 73 | interrupt-parent = <10c00>; |
| 74 | interrupts = <19 1>; |
| 75 | reg = <0>; |
| 76 | bitbang = [ 12 12 13 02 02 01 ]; |
| 77 | device_type = "ethernet-phy"; |
| 78 | }; |
| 79 | ethernet-phy@1 { |
| 80 | linux,phandle = <2452001>; |
| 81 | interrupt-parent = <10c00>; |
| 82 | interrupts = <19 1>; |
| 83 | bitbang = [ 12 12 13 02 02 01 ]; |
| 84 | reg = <3>; |
| 85 | device_type = "ethernet-phy"; |
| 86 | }; |
| 87 | }; |
| 88 | |
| 89 | ethernet@24000 { |
| 90 | #address-cells = <1>; |
| 91 | #size-cells = <0>; |
| 92 | device_type = "network"; |
| 93 | device-id = <2>; |
| 94 | compatible = "fs_enet"; |
| 95 | model = "FCC"; |
| 96 | reg = <11300 20 8400 100 11380 30>; |
| 97 | mac-address = [ 00 11 2F 99 43 54 ]; |
| 98 | interrupts = <20 2>; |
| 99 | interrupt-parent = <10c00>; |
| 100 | phy-handle = <2452000>; |
| 101 | rx-clock = <13>; |
| 102 | tx-clock = <12>; |
| 103 | }; |
| 104 | |
| 105 | ethernet@25000 { |
| 106 | device_type = "network"; |
| 107 | device-id = <3>; |
| 108 | compatible = "fs_enet"; |
| 109 | model = "FCC"; |
| 110 | reg = <11320 20 8500 100 113b0 30>; |
| 111 | mac-address = [ 00 11 2F 99 44 54 ]; |
| 112 | interrupts = <21 2>; |
| 113 | interrupt-parent = <10c00>; |
| 114 | phy-handle = <2452001>; |
| 115 | rx-clock = <17>; |
| 116 | tx-clock = <18>; |
| 117 | }; |
| 118 | |
| 119 | cpm@f0000000 { |
| 120 | linux,phandle = <f0000000>; |
| 121 | #address-cells = <1>; |
| 122 | #size-cells = <1>; |
| 123 | #interrupt-cells = <2>; |
| 124 | device_type = "cpm"; |
| 125 | model = "CPM2"; |
| 126 | ranges = <00000000 00000000 3ffff>; |
| 127 | reg = <10d80 3280>; |
| 128 | command-proc = <119c0>; |
| 129 | brg-frequency = <17D7840>; |
| 130 | cpm_clk = <BEBC200>; |
| 131 | |
| 132 | scc@11a00 { |
| 133 | device_type = "serial"; |
| 134 | compatible = "cpm_uart"; |
| 135 | model = "SCC"; |
| 136 | device-id = <2>; |
| 137 | reg = <11a00 20 8000 100>; |
| 138 | current-speed = <1c200>; |
| 139 | interrupts = <28 2>; |
| 140 | interrupt-parent = <10c00>; |
| 141 | clock-setup = <0 00ffffff>; |
| 142 | rx-clock = <1>; |
| 143 | tx-clock = <1>; |
| 144 | }; |
| 145 | |
| 146 | scc@11a60 { |
| 147 | device_type = "serial"; |
| 148 | compatible = "cpm_uart"; |
| 149 | model = "SCC"; |
| 150 | device-id = <5>; |
| 151 | reg = <11a60 20 8300 100>; |
| 152 | current-speed = <1c200>; |
| 153 | interrupts = <2b 2>; |
| 154 | interrupt-parent = <10c00>; |
| 155 | clock-setup = <1b ffffff00>; |
| 156 | rx-clock = <4>; |
| 157 | tx-clock = <4>; |
| 158 | }; |
| 159 | |
| 160 | }; |
| 161 | interrupt-controller@10c00 { |
| 162 | linux,phandle = <10c00>; |
| 163 | #address-cells = <0>; |
| 164 | #interrupt-cells = <2>; |
| 165 | interrupt-controller; |
| 166 | reg = <10c00 80>; |
| 167 | built-in; |
| 168 | device_type = "cpm-pic"; |
| 169 | compatible = "CPM2"; |
| 170 | }; |
| 171 | pci@0500 { |
| 172 | linux,phandle = <0500>; |
| 173 | #interrupt-cells = <1>; |
| 174 | #size-cells = <2>; |
| 175 | #address-cells = <3>; |
| 176 | compatible = "8272"; |
| 177 | device_type = "pci"; |
| 178 | reg = <10430 4dc>; |
| 179 | clock-frequency = <3f940aa>; |
| 180 | interrupt-map-mask = <f800 0 0 7>; |
| 181 | interrupt-map = < |
| 182 | |
| 183 | /* IDSEL 0x16 */ |
| 184 | b000 0 0 1 f8200000 40 0 |
| 185 | b000 0 0 2 f8200000 41 0 |
| 186 | b000 0 0 3 f8200000 42 0 |
| 187 | b000 0 0 4 f8200000 43 0 |
| 188 | |
| 189 | /* IDSEL 0x17 */ |
| 190 | b800 0 0 1 f8200000 43 0 |
| 191 | b800 0 0 2 f8200000 40 0 |
| 192 | b800 0 0 3 f8200000 41 0 |
| 193 | b800 0 0 4 f8200000 42 0 |
| 194 | |
| 195 | /* IDSEL 0x18 */ |
| 196 | c000 0 0 1 f8200000 42 0 |
| 197 | c000 0 0 2 f8200000 43 0 |
| 198 | c000 0 0 3 f8200000 40 0 |
| 199 | c000 0 0 4 f8200000 41 0>; |
| 200 | interrupt-parent = <10c00>; |
| 201 | interrupts = <14 3>; |
| 202 | bus-range = <0 0>; |
| 203 | ranges = <02000000 0 80000000 80000000 0 40000000 |
| 204 | 01000000 0 00000000 f6000000 0 02000000>; |
| 205 | }; |
| 206 | |
| 207 | /* May need to remove if on a part without crypto engine */ |
| 208 | crypto@30000 { |
| 209 | device_type = "crypto"; |
| 210 | model = "SEC2"; |
| 211 | compatible = "talitos"; |
| 212 | reg = <30000 10000>; |
| 213 | interrupts = <b 0>; |
| 214 | interrupt-parent = <10c00>; |
| 215 | num-channels = <4>; |
| 216 | channel-fifo-len = <18>; |
| 217 | exec-units-mask = <0000007e>; |
| 218 | /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ |
| 219 | descriptor-types-mask = <01010ebf>; |
| 220 | }; |
| 221 | |
| 222 | }; |
| 223 | }; |