1. 244e27a ixgbe: Store Tx flags and protocol information to tx_buffer sooner by Alexander Duyck · 13 years ago
  2. 729739b ixgbe: always write DMA for single_mapped value with skb by Alexander Duyck · 13 years ago
  3. 091a624 ixgbe: Write gso_segs and bytcount to the ring sooner by Alexander Duyck · 13 years ago
  4. fd0db0e ixgbe: Place skb on first buffer_info structure to avoid using stack space by Alexander Duyck · 13 years ago
  5. 7d7ce68 ixgbe: Use packets to track Tx completions instead of a seperate value by Alexander Duyck · 13 years ago
  6. 93f5b3c ixgbe: Modify setup of descriptor flags to avoid conditional jumps by Alexander Duyck · 13 years ago
  7. a50c29d ixgbe: Make certain that all frames fit minimum size requirements by Alexander Duyck · 13 years ago
  8. 655309e ixgbe: cleanup logic in ixgbe_change_mtu by Alexander Duyck · 13 years ago
  9. f800326 ixgbe: Replace standard receive path with a page based receive by Alexander Duyck · 13 years ago
  10. 3f2d1c0 ixgbe: Support RX-ALL feature flag. by Ben Greear · 13 years ago
  11. f43f313 ixgbe: Support sending custom Ethernet FCS. by Ben Greear · 13 years ago
  12. 89eaefb igb: Support RX-ALL feature flag. by Ben Greear · 13 years ago
  13. 6b8f092 igb: Support sending custom Ethernet FCS. by Ben Greear · 13 years ago
  14. cdf485b ixgbe: dcb: use DCB config values for FCoE traffic class on open by John Fastabend · 13 years ago
  15. d2f5e7f ixgbe: Fix race condition where RX buffer could become corrupted. by Atita Shirwaikar · 13 years ago
  16. 3ed69d7 ixgbe: use typed min/max functions where possible by Jesse Brandeburg · 13 years ago
  17. 9cdcf09 ixgbe: fix obvious return value bug. by Don Skidmore · 13 years ago
  18. 621bd70 ixgbe: Replace eitr_low and eitr_high with static values in ixgbe_update_itr by Alexander Duyck · 13 years ago
  19. bdda1a6 ixgbe: Do not disable read relaxed ordering when DCA is enabled by Alexander Duyck · 13 years ago
  20. 5edc446 ixgb: Remove unnecessary defines, use pr_debug by Joe Perches · 13 years ago
  21. 3832b26 ixgbe: Simplify logic for ethtool loopback frame creation and testing by Alexander Duyck · 13 years ago
  22. a557928 ixgbe: Add iterator for cycling through rings on a q_vector by Alexander Duyck · 13 years ago
  23. de88eee ixgbe: Allocate rings as part of the q_vector by Alexander Duyck · 13 years ago
  24. b9f6ed2 ixgbe: Drop unnecessary napi_schedule_prep and spare blank line from ixgbe_intr by Alexander Duyck · 13 years ago
  25. 8f15486 ixgbe: Default to queue pairs when number of queues is less than CPUs by Alexander Duyck · 13 years ago
  26. 5d967eb ixgbe: Correct Adaptive Interrupt Moderation so that it will change values by Alexander Duyck · 13 years ago
  27. e954b37 ixgbe: Address issues with Tx WHTRESH value not being set correctly by Alexander Duyck · 13 years ago
  28. 46646e6 ixgbe: Reorder adapter contents for better cache utilization by Alexander Duyck · 13 years ago
  29. 7f83a9e ixgbe: Do no clear Tx status bits since eop_desc provides enough info by Alexander Duyck · 13 years ago
  30. 5c49035 net: Fix issue with netdev_tx_reset_queue not resetting queue from XOFF state by Alexander Duyck · 13 years ago
  31. b2d96e0 ixgbe: add support for byte queue limits by Alexander Duyck · 13 years ago
  32. 35551c4 ixgbe: remove tie between NAPI work limits and interrupt moderation by Jeff Kirsher · 14 years ago
  33. 51a76c3 igb: fix ethtool offline test by Jeff Kirsher · 13 years ago
  34. 2b88f2d net: dcb: getnumtcs()/setnumtcs() should return an int by John Fastabend · 13 years ago
  35. 89d27a3 ixgbe: dcb: check setup_tc return codes by John Fastabend · 13 years ago
  36. 6f66342c e100: Show short v/s long rx length errors in ethtool stats. by Ben Greear · 13 years ago
  37. d24d65e e100: Fix rx-over-length statistics. by Ben Greear · 13 years ago
  38. 24ddd96 ixgbe: Fix comments that are out of date or formatted incorrectly by Alexander Duyck · 13 years ago
  39. c466d7a ixgbe: fix spelling errors by Don Skidmore · 13 years ago
  40. 9e0c564 ixgbe: Minor formatting and comment corrections for ixgbe_xmit_frame_ring by Alexander Duyck · 13 years ago
  41. bb9c5ee e1000e: use msleep instead of mdelay by Bruce Allan · 13 years ago
  42. 3d3a167 e1000e: cleanup whitespace and indentation by Bruce Allan · 13 years ago
  43. 06c24b9 e1000e: cleanup incorrect filename in comment by Bruce Allan · 13 years ago
  44. 0bf61e6 e100: Support RXALL feature flag. by Ben Greear · 13 years ago
  45. 75f58a5 e100: Support sending custom Ethernet CRC by Ben Greear · 13 years ago
  46. 719cdac e100: Support RXFCS feature flag. by Ben Greear · 13 years ago
  47. e85e363 e1000e: rename e1000e_reload_nvm() and call as function pointer by Bruce Allan · 13 years ago
  48. 0d37678 e1000e: cleanup - remove unnecessary variable by Bruce Allan · 13 years ago
  49. b20caa8 e1000e: use true/false for boolean send_xon, do not assume always true by Bruce Allan · 13 years ago
  50. b2a50e1 e1000e: cleanup comment in e1000_hash_mc_addr() by Bruce Allan · 13 years ago
  51. 57cde76 e1000e: rename e1000e_config_collision_dist() and call as function pointer by Bruce Allan · 13 years ago
  52. 6e3c807 e1000e: comment correction in e1000e_set_kmrn_lock_loss_workaround_ich8lan by Bruce Allan · 13 years ago
  53. 944ce01 e1000e: cleanup calls to setup_physical_interface function pointer by Bruce Allan · 13 years ago
  54. 44abd5c e1000e: cleanup use of check_reset_block function pointer by Bruce Allan · 13 years ago
  55. 4876832 e1000e: cleanup use of check_mng_mode function pointer by Bruce Allan · 13 years ago
  56. 1a46b40 e1000e: cleanup: rename e1000e_setup_link() and call as function pointer by Bruce Allan · 13 years ago
  57. d1964eb e1000e: cleanup: rename e1000e_id_led_init() and call as function pointer by Bruce Allan · 13 years ago
  58. f794e7e ixgbevf: print MAC via printk format specifier by Danny Kukawka · 13 years ago
  59. e29b5d8 v2 e1000: Neaten e1000_dump function by Tushar Dave · 13 years ago
  60. 542c3f4 e1000: Neaten e1000_config_dsp_after_link_change by Joe Perches · 13 years ago
  61. dffcdde e1000e: cosmetic comment changes to make lines less than 80 characters by Bruce Allan · 13 years ago
  62. b4d8e21 e1000e: cosmetic change to boolean comparisons by Bruce Allan · 13 years ago
  63. b0d1562 e1000: Support RX-FCS flag. by Ben Greear · 13 years ago
  64. 11a78dc e1000: Support sending custom Ethernet CRC. by Ben Greear · 13 years ago
  65. cf955e6 e1000e: Support RXALL feature flag. by Ben Greear · 13 years ago
  66. 943146d e1000e: Support sending custom Ethernet CRC. by Ben Greear · 13 years ago
  67. 0184039 e1000e: Support RXFCS feature flag. by Ben Greear · 13 years ago
  68. 067fb4c igbvf: reset netdevice addr_assign_type if changed by Danny Kukawka · 13 years ago
  69. 5015e53 e1000e: cleanup goto statements to exit points without common work by Bruce Allan · 13 years ago
  70. 2a31b37 e1000e: potentially incorrect return for e1000e_setup_fiber_serdes_link by Bruce Allan · 13 years ago
  71. e561a70 e1000e: potentially incorrect return for e1000_init_hw_ich8lan by Bruce Allan · 13 years ago
  72. 3fa829363 e1000e: cleanup: minor whitespace addition (insert blank line separator) by Bruce Allan · 13 years ago
  73. f71dde6 e1000e: cleanup: remove unnecessary variable initializations by Bruce Allan · 13 years ago
  74. f764956 e1000e: cleanup: remove unnecessary test and return by Bruce Allan · 13 years ago
  75. 55920b5 e1000e: cleanup: remove unnecessary variable ret_val by Bruce Allan · 13 years ago
  76. f1a3fe1 e1000e: cleanup: remove unreachable statement by Bruce Allan · 13 years ago
  77. d7eb338 e1000e: potentially incorrect return for e1000_set_d3_lplu_state_ich8lan by Bruce Allan · 13 years ago
  78. 8260725 e1000e: cleanup: always return 0 by Bruce Allan · 13 years ago
  79. 7eb61d8 e1000e: cleanup: remove unnecessary assignments just before returning by Bruce Allan · 13 years ago
  80. 8649f43 e1000e: potential incorrect return for e1000_setup_copper_link_80003es2lan by Bruce Allan · 13 years ago
  81. 520d6f2 e1000e: potentially incorrect return for e1000_cfg_kmrn_10_100_80003es2lan by Bruce Allan · 13 years ago
  82. 75ce153 e1000e: cleanup: rename goto labels to be more meaningful by Bruce Allan · 13 years ago
  83. ffacd47 e1000e: cleanup: use goto for common work needed by multiple exit points by Bruce Allan · 13 years ago
  84. 23677ce drivers/net: Remove boolean comparisons to true/false by Joe Perches · 13 years ago
  85. 1a0d6ae rename dev_hw_addr_random and remove redundant second by Danny Kukawka · 13 years ago
  86. 3cc26e3 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next by David S. Miller · 13 years ago
  87. d5ef8a4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/davem/net by David S. Miller · 13 years ago
  88. 8a0da21 ixgbe: Combine post-DMA processing of sk_buff fields into single function by Alexander Duyck · 13 years ago
  89. e4f7402 ixgbe: Drop the _ADV of descriptor macros since all ixgbe descriptors are ADV by Alexander Duyck · 13 years ago
  90. f56e0cb ixgbe: Add function for testing status bits in Rx descriptor by Alexander Duyck · 13 years ago
  91. f990b79 ixgbe: Let the Rx buffer allocation clear status bits instead of cleanup by Alexander Duyck · 13 years ago
  92. 1d2024f ixgbe: Address fact that RSC was not setting GSO size for incoming frames by Alexander Duyck · 13 years ago
  93. 4c1975d ixgbe: Minor refactor of RSC by Alexander Duyck · 13 years ago
  94. d9dd966 igb: fix warning about unused function by Emil Tantilov · 13 years ago
  95. f92518d e1000e: replace '1' with 'true' for boolean get_link_status by Bruce Allan · 13 years ago
  96. ec34c17 e1000e: pass pointer to hw struct for e1000_init_mac_params_XXX() by Bruce Allan · 13 years ago
  97. 07914ee e1000e: use true/false for bool autoneg_false by Bruce Allan · 13 years ago
  98. 668018d e1000e: remove unnecessary parentheses by Bruce Allan · 13 years ago
  99. fe1e980 e1000e: remove unnecessary returns from void functions by Bruce Allan · 13 years ago
  100. 4bcf053 e1000e: remove test that is always false by Bruce Allan · 13 years ago