| #include <dt-bindings/regulator/qcom,rpmh-regulator-levels.h> |
| |
| &apps_rsc { |
| /* RPMh regulators: */ |
| |
| rpmh-regulator-smpa4 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpa4"; |
| S4A: pm8150_1_s4: regulator-pm8150-1-s4 { |
| regulator-name = "pm8150_1_s4"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpa5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpa5"; |
| S5A: pm8150_1_s5: regulator-pm8150-1-s5 { |
| regulator-name = "pm8150_1_s5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1824000>; |
| regulator-max-microvolt = <2040000>; |
| qcom,init-voltage = <1824000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpa6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpa6"; |
| S6A: pm8150_1_s6: regulator-pm8150-1-s6 { |
| regulator-name = "pm8150_1_s6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <1352000>; |
| qcom,init-voltage = <600000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpa7 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpa7"; |
| S7A: pm8150_1_s7: regulator-pm8150-1-s7 { |
| regulator-name = "pm8150_1_s7"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <600000>; |
| regulator-max-microvolt = <600000>; |
| qcom,init-voltage = <600000>; |
| }; |
| }; |
| |
| /* PM8150_1 S8 = VDD_MODEM supply */ |
| rpmh-regulator-msslvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "mss.lvl"; |
| S1A_LEVEL: pm8150_1_s8_level: regulator-pm8150-1-s8-level { |
| regulator-name = "pm8150_1_s8_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa1"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L1A: pm8150_1_l1: regulator-pm8150-1-l1 { |
| regulator-name = "pm8150_1_l1"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <752000>; |
| regulator-max-microvolt = <752000>; |
| qcom,init-voltage = <752000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa2"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L2A: pm8150_1_l2: regulator-pm8150-1-l2 { |
| regulator-name = "pm8150_1_l2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <3072000>; |
| regulator-max-microvolt = <3072000>; |
| qcom,init-voltage = <3072000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa3 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa3"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L3A: pm8150_1_l3: regulator-pm8150-1-l3 { |
| regulator-name = "pm8150_1_l3"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <480000>; |
| regulator-max-microvolt = <932000>; |
| qcom,init-voltage = <480000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa5"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| |
| L5A: pm8150_1_l5: regulator-pm8150-1-l5 { |
| regulator-name = "pm8150_1_l5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <888000>; |
| qcom,init-voltage = <880000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| L5A_AO: pm8150_1_l5_ao: regulator-pm8150-1-l5-ao { |
| regulator-name = "pm8150_1_l5_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <888000>; |
| qcom,init-voltage = <880000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| regulator-pm8150-1-l5-so { |
| regulator-name = "pm8150_1_l5_so"; |
| qcom,set = <RPMH_REGULATOR_SET_SLEEP>; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <888000>; |
| qcom,init-voltage = <880000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| qcom,init-enable = <0>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa6"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L6A: pm8150_1_l6: regulator-pm8150-1-l6 { |
| regulator-name = "pm8150_1_l6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <1200000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa7 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa7"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L7A: pm8150_1_l7: regulator-pm8150-1-l7 { |
| regulator-name = "pm8150_1_l7"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa10 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa10"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 10000>; |
| L10A: pm8150_1_l10: regulator-pm8150-1-l10 { |
| regulator-name = "pm8150_1_l10"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2504000>; |
| regulator-max-microvolt = <2960000>; |
| qcom,init-voltage = <2504000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa11 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa11"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L11A: pm8150_1_l11: regulator-pm8150-1-l11 { |
| regulator-name = "pm8150_1_l11"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <800000>; |
| qcom,init-voltage = <800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa12 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa12"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L12A: pm8150_1_l12: regulator-pm8150-1-l12 { |
| regulator-name = "pm8150_1_l12"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| L12A_AO: pm8150_1_l12_ao: regulator-pm8150-1-l12-ao { |
| regulator-name = "pm8150_1_l12_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| regulator-pm8150-1-l12-so { |
| regulator-name = "pm8150_1_l12_so"; |
| qcom,set = <RPMH_REGULATOR_SET_SLEEP>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| qcom,init-enable = <0>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa13 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa13"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L13A: pm8150_1_l13: regulator-pm8150-1-l13 { |
| regulator-name = "pm8150_1_l13"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2704000>; |
| regulator-max-microvolt = <2704000>; |
| qcom,init-voltage = <2704000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa15 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa15"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L15A: pm8150_1_l15: regulator-pm8150-1-l15 { |
| regulator-name = "pm8150_1_l15"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1704000>; |
| regulator-max-microvolt = <1704000>; |
| qcom,init-voltage = <1704000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa16 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa16"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L16A: pm8150_1_l16: regulator-pm8150-1-l16 { |
| regulator-name = "pm8150_1_l16"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2704000>; |
| regulator-max-microvolt = <2960000>; |
| qcom,init-voltage = <2704000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoa17 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoa17"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L17A: pm8150_1_l17: regulator-pm8150-1-l17 { |
| regulator-name = "pm8150_1_l17"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2704000>; |
| regulator-max-microvolt = <2960000>; |
| qcom,init-voltage = <2704000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| /* PM8150_2 S3 + S2 + S1 = 3 phase VDD_GFX supply */ |
| rpmh-regulator-gfxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "gfx.lvl"; |
| VDD_GFX_LEVEL: |
| S3C_LEVEL: pm8150_2_s3_level: regulator-pm8150-2-s3-level { |
| regulator-name = "pm8150_2_s3_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| rpmh-regulator-smpc4 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpc4"; |
| S4C: pm8150_2_s4: regulator-pm8150-2-s4 { |
| regulator-name = "pm8150_2_s4"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1400000>; |
| qcom,init-voltage = <800000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpc5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpc5"; |
| S5C: pm8150_2_s5: regulator-pm8150-2-s5 { |
| regulator-name = "pm8150_2_s5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1824000>; |
| regulator-max-microvolt = <2040000>; |
| qcom,init-voltage = <1824000>; |
| }; |
| }; |
| |
| rpmh-regulator-smpc6 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "smpc6"; |
| S6C: pm8150_2_s6: regulator-pm8150-2-s6 { |
| regulator-name = "pm8150_2_s6"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1128000>; |
| regulator-max-microvolt = <1128000>; |
| qcom,init-voltage = <1128000>; |
| }; |
| }; |
| |
| /* PM8150_2 S9 + S8 + S7 = VDD_CX supply */ |
| rpmh-regulator-cxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "cx.lvl"; |
| pm8150_2_s9_level-parent-supply = <&VDD_MX_LEVEL>; |
| pm8150_2_s9_level_ao-parent-supply = <&VDD_MX_LEVEL_AO>; |
| |
| VDD_CX_LEVEL: VDD_MMCX_LEVEL: |
| S9C_LEVEL: pm8150_2_s9_level: regulator-pm8150-2-s9-level { |
| regulator-name = "pm8150_2_s9_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| qcom,min-dropout-voltage-level = <(-1)>; |
| }; |
| |
| VDD_CX_LEVEL_AO: VDD_MMCX_LEVEL_AO: S9C_LEVEL_AO: |
| pm8150_2_s9_level_ao: regulator-pm8150-2-s9-level-ao { |
| regulator-name = "pm8150_2_s9_level_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| qcom,min-dropout-voltage-level = <(-1)>; |
| }; |
| }; |
| |
| /* PM8150_2 S10 = VDD_MX supply */ |
| rpmh-regulator-mxlvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "mx.lvl"; |
| |
| VDD_MX_LEVEL: |
| S10C_LEVEL: pm8150_2_s10_level: regulator-pm8150-2-s10-level { |
| regulator-name = "pm8150_2_s10_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| |
| VDD_MX_LEVEL_AO: S10C_LEVEL_AO: |
| pm8150_2_s10_level_ao: regulator-pm8150-2-s10-level-ao { |
| regulator-name = "pm8150_2_s10_level_ao"; |
| qcom,set = <RPMH_REGULATOR_SET_ACTIVE>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc1 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc1"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L1C: pm8150_2_l1: regulator-pm8150-2-l1 { |
| regulator-name = "pm8150_2_l1"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1304000>; |
| regulator-max-microvolt = <1304000>; |
| qcom,init-voltage = <1304000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc2 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc2"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L2C: pm8150_2_l2: regulator-pm8150-2-l2 { |
| regulator-name = "pm8150_2_l2"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1704000>; |
| regulator-max-microvolt = <2928000>; |
| qcom,init-voltage = <1704000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc5 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc5"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L5C: pm8150_2_l5: regulator-pm8150-2-l5 { |
| regulator-name = "pm8150_2_l5"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <1200000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc7 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc7"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L7C: pm8150_2_l7: regulator-pm8150-2-l7 { |
| regulator-name = "pm8150_2_l7"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc8 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc8"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L8C: pm8150_2_l8: regulator-pm8150-2-l8 { |
| regulator-name = "pm8150_2_l8"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| qcom,init-voltage = <1200000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| /* PM8150_2 L11 = VDD_EBI supply */ |
| rpmh-regulator-ebilvl { |
| compatible = "qcom,rpmh-arc-regulator"; |
| qcom,resource-name = "ebi.lvl"; |
| L11C_LEVEL: pm8150_2_l11_level: regulator-pm8150-2-l11-level { |
| regulator-name = "pm8150_2_l11_level"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| regulator-max-microvolt |
| = <RPMH_REGULATOR_LEVEL_MAX>; |
| qcom,init-voltage-level |
| = <RPMH_REGULATOR_LEVEL_RETENTION>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc12 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc12"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L12C: pm8150_2_l12: regulator-pm8150-2-l12 { |
| regulator-name = "pm8150_2_l12"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1704000>; |
| regulator-max-microvolt = <1888000>; |
| qcom,init-voltage = <1704000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc13 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc13"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L13C: pm8150_2_l13: regulator-pm8150-2-l13 { |
| regulator-name = "pm8150_2_l13"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2960000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc15 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc15"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L15C: pm8150_2_l15: regulator-pm8150-2-l15 { |
| regulator-name = "pm8150_2_l15"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1904000>; |
| qcom,init-voltage = <1800000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc16 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc16"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| L16C: pm8150_2_l16: regulator-pm8150-2-l16 { |
| regulator-name = "pm8150_2_l16"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <2704000>; |
| regulator-max-microvolt = <3008000>; |
| qcom,init-voltage = <2704000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| |
| rpmh-regulator-ldoc18 { |
| compatible = "qcom,rpmh-vrm-regulator"; |
| qcom,resource-name = "ldoc18"; |
| qcom,regulator-type = "pmic5-ldo"; |
| qcom,supported-modes = |
| <RPMH_REGULATOR_MODE_LPM |
| RPMH_REGULATOR_MODE_HPM>; |
| qcom,mode-threshold-currents = <0 1>; |
| proxy-supply = <&pm8150_2_l18>; |
| L18C: pm8150_2_l18: regulator-pm8150-2-l18 { |
| regulator-name = "pm8150_2_l18"; |
| qcom,set = <RPMH_REGULATOR_SET_ALL>; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <880000>; |
| qcom,proxy-consumer-enable; |
| qcom,proxy-consumer-current = <23800>; |
| qcom,init-voltage = <880000>; |
| qcom,init-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| }; |