pcmcia: use autoconfiguration feature for ioports and iomem
When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding
fields in struct pcmcia_device *p_dev->resource[0,1,2] are set
accordinly. Drivers wishing to override certain settings may do so in
the callback function, but they no longer need to parse the CIS entries
stored in cistpl_cftable_entry_t themselves.
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: linux-bluetooth@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index 17f1040..9d9d997 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -284,34 +284,16 @@
}
}
-static int axnet_configcheck(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cfg,
- cistpl_cftable_entry_t *dflt,
- void *priv_data)
+static int axnet_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
- int i;
- cistpl_io_t *io = &cfg->io;
-
- if (cfg->index == 0 || cfg->io.nwin == 0)
- return -ENODEV;
+ if (p_dev->config_index == 0)
+ return -EINVAL;
p_dev->config_index = 0x05;
- /* For multifunction cards, by convention, we configure the
- network function with window 0, and serial with window 1 */
- if (io->nwin > 1) {
- i = (io->win[1].len > io->win[0].len);
- p_dev->resource[1]->start = io->win[1-i].base;
- p_dev->resource[1]->end = io->win[1-i].len;
- } else {
- i = p_dev->resource[1]->end = 0;
- }
- p_dev->resource[0]->start = io->win[i].base;
- p_dev->resource[0]->end = io->win[i].len;
- p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
- if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
- return try_io_port(p_dev);
+ if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32)
+ return -ENODEV;
- return -ENODEV;
+ return try_io_port(p_dev);
}
static int axnet_config(struct pcmcia_device *link)
@@ -324,6 +306,7 @@
/* don't trust the CIS on this; Linksys got it wrong */
link->config_regs = 0x63;
+ link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
ret = pcmcia_loop_config(link, axnet_configcheck, NULL);
if (ret != 0)
goto failed;
@@ -331,7 +314,6 @@
if (!link->irq)
goto failed;
- link->config_flags |= CONF_ENABLE_IRQ;
if (resource_size(link->resource[1]) == 8)
link->config_flags |= CONF_ENABLE_SPKR;
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index c1479e3..792ab38 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -319,10 +319,7 @@
return ret; /* RequestIO failed */
}
-static int fmvj18x_ioprobe(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cfg,
- cistpl_cftable_entry_t *dflt,
- void *priv_data)
+static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
{
return 0; /* strange, but that's what the code did already before... */
}
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 12b028c..ffe2587 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -259,7 +259,7 @@
info->p_dev = link;
link->priv = dev;
- link->config_flags |= CONF_ENABLE_IRQ;
+ link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
dev->netdev_ops = &pcnet_netdev_ops;
@@ -500,42 +500,22 @@
}
}
-static int pcnet_confcheck(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cfg,
- cistpl_cftable_entry_t *dflt,
- void *priv_data)
+static int pcnet_confcheck(struct pcmcia_device *p_dev, void *priv_data)
{
int *priv = priv_data;
int try = (*priv & 0x1);
- int i;
- cistpl_io_t *io = &cfg->io;
- if (cfg->index == 0 || cfg->io.nwin == 0)
+ *priv &= (p_dev->resource[2]->end >= 0x4000) ? 0x10 : ~0x10;
+
+ if (p_dev->config_index == 0)
return -EINVAL;
- /* For multifunction cards, by convention, we configure the
- network function with window 0, and serial with window 1 */
- if (io->nwin > 1) {
- i = (io->win[1].len > io->win[0].len);
- p_dev->resource[1]->start = io->win[1-i].base;
- p_dev->resource[1]->end = io->win[1-i].len;
- } else {
- i = p_dev->resource[1]->end = 0;
- }
+ if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32)
+ return -EINVAL;
- *priv &= ((cfg->mem.nwin == 1) &&
- (cfg->mem.win[0].len >= 0x4000)) ? 0x10 : ~0x10;
-
- p_dev->resource[0]->start = io->win[i].base;
- p_dev->resource[0]->end = io->win[i].len;
- if (!try)
- p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
- else
+ if (try)
p_dev->io_lines = 16;
- if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32)
- return try_io_port(p_dev);
-
- return -EINVAL;
+ return try_io_port(p_dev);
}
static hw_info_t *pcnet_try_config(struct pcmcia_device *link,
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index e127d2b..a8cef28 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -323,9 +323,6 @@
link->priv = dev;
spin_lock_init(&smc->lock);
- link->resource[0]->end = 16;
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
- link->config_flags |= CONF_ENABLE_IRQ;
/* The SMC91c92-specific entries in the device structure. */
dev->netdev_ops = &smc_netdev_ops;
@@ -417,18 +414,21 @@
return 0;
}
-static int mhz_mfc_config_check(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- void *priv_data)
+static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
int k;
- p_dev->resource[1]->start = cf->io.win[0].base;
+ p_dev->io_lines = 16;
+ p_dev->resource[1]->start = p_dev->resource[0]->start;
+ p_dev->resource[1]->end = 8;
+ p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->end = 16;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
for (k = 0; k < 0x400; k += 0x10) {
if (k & 0x80)
continue;
p_dev->resource[0]->start = k ^ 0x300;
- p_dev->io_lines = 16;
if (!pcmcia_request_io(p_dev))
return 0;
}
@@ -442,9 +442,8 @@
unsigned int offset;
int i;
- link->config_flags |= CONF_ENABLE_SPKR;
- link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
- link->resource[1]->end = 8;
+ link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ |
+ CONF_AUTO_SET_IO;
/* The Megahertz combo cards have modem-like CIS entries, so
we have to explicitly try a bunch of port combinations. */
@@ -586,13 +585,12 @@
/*====================================================================*/
-static int smc_configcheck(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- void *priv_data)
+static int smc_configcheck(struct pcmcia_device *p_dev, void *priv_data)
{
- p_dev->resource[0]->start = cf->io.win[0].base;
- p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
+ p_dev->resource[0]->end = 16;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
+
return pcmcia_request_io(p_dev);
}
@@ -601,7 +599,8 @@
struct net_device *dev = link->priv;
int i;
- link->resource[0]->end = 16;
+ link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
+
i = pcmcia_loop_config(link, smc_configcheck, NULL);
if (!i)
dev->base_addr = link->resource[0]->start;
@@ -634,7 +633,7 @@
static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
int i, j;
- link->config_flags |= CONF_ENABLE_SPKR;
+ link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ;
link->resource[0]->end = 64;
link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
link->resource[1]->end = 8;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 2bc2eb8..cecc074 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -528,7 +528,6 @@
link->priv = dev;
/* General socket configuration */
- link->config_flags |= CONF_ENABLE_IRQ;
link->config_index = 1;
/* Fill in card specific entries */
@@ -665,42 +664,53 @@
}
static int
-xirc2ps_config_modem(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- void *priv_data)
+xirc2ps_config_modem(struct pcmcia_device *p_dev, void *priv_data)
{
unsigned int ioaddr;
- if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
- for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- p_dev->resource[1]->start = cf->io.win[0].base;
- p_dev->resource[0]->start = ioaddr;
- if (!pcmcia_request_io(p_dev))
- return 0;
- }
+ if ((p_dev->resource[0]->start & 0xf) == 8)
+ return -ENODEV;
+
+ p_dev->resource[0]->end = 16;
+ p_dev->resource[1]->end = 8;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+ p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->io_lines = 10;
+
+ p_dev->resource[1]->start = p_dev->resource[0]->start;
+ for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
+ p_dev->resource[0]->start = ioaddr;
+ if (!pcmcia_request_io(p_dev))
+ return 0;
}
return -ENODEV;
}
static int
-xirc2ps_config_check(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cf,
- cistpl_cftable_entry_t *dflt,
- void *priv_data)
+xirc2ps_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
int *pass = priv_data;
+ resource_size_t tmp = p_dev->resource[1]->start;
- if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) {
- p_dev->resource[1]->start = cf->io.win[0].base;
- p_dev->resource[0]->start = p_dev->resource[1]->start
- + (*pass ? (cf->index & 0x20 ? -24:8)
- : (cf->index & 0x20 ? 8:-24));
- if (!pcmcia_request_io(p_dev))
- return 0;
- }
- return -ENODEV;
+ tmp += (*pass ? (p_dev->config_index & 0x20 ? -24 : 8)
+ : (p_dev->config_index & 0x20 ? 8 : -24));
+ if ((p_dev->resource[0]->start & 0xf) == 8)
+ return -ENODEV;
+
+ p_dev->resource[0]->end = 18;
+ p_dev->resource[1]->end = 8;
+ p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+ p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
+ p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->io_lines = 10;
+
+ p_dev->resource[1]->start = p_dev->resource[0]->start;
+ p_dev->resource[0]->start = tmp;
+ return pcmcia_request_io(p_dev);
}
@@ -803,21 +813,16 @@
goto failure;
}
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
- link->io_lines = 10;
if (local->modem) {
int pass;
+ link->config_flags |= CONF_AUTO_SET_IO;
- link->resource[1]->end = 8;
- link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
if (local->dingo) {
/* Take the Modem IO port from the CIS and scan for a free
* Ethernet port */
- link->resource[0]->end = 16; /* no Mako stuff anymore */
if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
goto port_found;
} else {
- link->resource[0]->end = 18;
/* We do 2 passes here: The first one uses the regular mapping and
* the second tries again, thereby considering that the 32 ports are
* mirrored every 32 bytes. Actually we use a mirrored port for
@@ -833,7 +838,9 @@
}
printk(KNOT_XIRC "no ports available\n");
} else {
+ link->io_lines = 10;
link->resource[0]->end = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
link->resource[0]->start = ioaddr;
if (!(err = pcmcia_request_io(link)))