pcmcia: use autoconfiguration feature for ioports and iomem
When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding
fields in struct pcmcia_device *p_dev->resource[0,1,2] are set
accordinly. Drivers wishing to override certain settings may do so in
the callback function, but they no longer need to parse the CIS entries
stored in cistpl_cftable_entry_t themselves.
CC: netdev@vger.kernel.org
CC: linux-wireless@vger.kernel.org
CC: linux-ide@vger.kernel.org
CC: linux-usb@vger.kernel.org
CC: laforge@gnumonks.org
CC: linux-mtd@lists.infradead.org
CC: linux-bluetooth@vger.kernel.org
CC: alsa-devel@alsa-project.org
CC: linux-serial@vger.kernel.org
CC: Jiri Kosina <jkosina@suse.cz>
CC: linux-scsi@vger.kernel.org
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index 344d499..3b90ad9 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -1556,13 +1556,6 @@
nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info);
- /* The io structure describes IO port mapping */
- link->resource[0]->end = 0x10;
- link->resource[0]->flags = IO_DATA_PATH_WIDTH_AUTO;
-
- /* General socket configuration */
- link->config_flags |= CONF_ENABLE_IRQ;
-
ret = nsp_cs_config(link);
nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link);
@@ -1594,50 +1587,27 @@
ethernet device available to the system.
======================================================================*/
-static int nsp_cs_config_check(struct pcmcia_device *p_dev,
- cistpl_cftable_entry_t *cfg,
- cistpl_cftable_entry_t *dflt,
- void *priv_data)
+static int nsp_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
nsp_hw_data *data = priv_data;
- if (cfg->index == 0)
+ if (p_dev->config_index == 0)
return -ENODEV;
- /* IO window settings */
- p_dev->resource[0]->end = p_dev->resource[1]->end = 0;
- if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
- cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
- p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK;
- p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[0]->flags |=
- pcmcia_io_cfg_data_width(io->flags);
- p_dev->resource[0]->start = io->win[0].base;
- p_dev->resource[0]->end = io->win[0].len;
- if (io->nwin > 1) {
- p_dev->resource[1]->flags = p_dev->resource[0]->flags;
- p_dev->resource[1]->start = io->win[1].base;
- p_dev->resource[1]->end = io->win[1].len;
- }
- /* This reserves IO space but doesn't actually enable it */
- if (pcmcia_request_io(p_dev) != 0)
- goto next_entry;
- }
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(p_dev) != 0)
+ goto next_entry;
- if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
- cistpl_mem_t *mem =
- (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
+ if (resource_size(p_dev->resource[2])) {
p_dev->resource[2]->flags |= (WIN_DATA_WIDTH_16 |
WIN_MEMORY_TYPE_CM |
WIN_ENABLE);
- p_dev->resource[2]->start = mem->win[0].host_addr;
- p_dev->resource[2]->end = mem->win[0].len;
if (p_dev->resource[2]->end < 0x1000)
p_dev->resource[2]->end = 0x1000;
if (pcmcia_request_window(p_dev, p_dev->resource[2], 0) != 0)
goto next_entry;
if (pcmcia_map_mem_page(p_dev, p_dev->resource[2],
- mem->win[0].card_addr) != 0)
+ p_dev->card_addr) != 0)
goto next_entry;
data->MmioAddress = (unsigned long)
@@ -1664,7 +1634,8 @@
nsp_dbg(NSP_DEBUG_INIT, "in");
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC |
- CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO;
+ CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IOMEM |
+ CONF_AUTO_SET_IO;
ret = pcmcia_loop_config(link, nsp_cs_config_check, data);
if (ret)