| /* |
| * drivers/cpufreq/cpufreq_interactive.c |
| * |
| * Copyright (C) 2010 Google, Inc. |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Author: Mike Chan (mike@android.com) |
| * |
| */ |
| |
| #include <linux/cpu.h> |
| #include <linux/cpumask.h> |
| #include <linux/cpufreq.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/sched.h> |
| #include <linux/tick.h> |
| #include <linux/time.h> |
| #include <linux/timer.h> |
| #include <linux/workqueue.h> |
| #include <linux/kthread.h> |
| #include <linux/mutex.h> |
| #include <linux/slab.h> |
| #include <linux/input.h> |
| #include <asm/cputime.h> |
| |
| #define CREATE_TRACE_POINTS |
| #include <trace/events/cpufreq_interactive.h> |
| |
| static atomic_t active_count = ATOMIC_INIT(0); |
| |
| struct cpufreq_interactive_cpuinfo { |
| struct timer_list cpu_timer; |
| int timer_idlecancel; |
| u64 time_in_idle; |
| u64 idle_exit_time; |
| u64 timer_run_time; |
| int idling; |
| u64 target_set_time; |
| u64 target_set_time_in_idle; |
| struct cpufreq_policy *policy; |
| struct cpufreq_frequency_table *freq_table; |
| unsigned int target_freq; |
| unsigned int floor_freq; |
| u64 floor_validate_time; |
| u64 hispeed_validate_time; |
| int governor_enabled; |
| }; |
| |
| static DEFINE_PER_CPU(struct cpufreq_interactive_cpuinfo, cpuinfo); |
| |
| /* Workqueues handle frequency scaling */ |
| static struct task_struct *up_task; |
| static struct workqueue_struct *down_wq; |
| static struct work_struct freq_scale_down_work; |
| static cpumask_t up_cpumask; |
| static spinlock_t up_cpumask_lock; |
| static cpumask_t down_cpumask; |
| static spinlock_t down_cpumask_lock; |
| static struct mutex set_speed_lock; |
| |
| /* Hi speed to bump to from lo speed when load burst (default max) */ |
| static u64 hispeed_freq; |
| |
| /* Go to hi speed when CPU load at or above this value. */ |
| #define DEFAULT_GO_HISPEED_LOAD 85 |
| static unsigned long go_hispeed_load; |
| |
| /* |
| * The minimum amount of time to spend at a frequency before we can ramp down. |
| */ |
| #define DEFAULT_MIN_SAMPLE_TIME (80 * USEC_PER_MSEC) |
| static unsigned long min_sample_time; |
| |
| /* |
| * The sample rate of the timer used to increase frequency |
| */ |
| #define DEFAULT_TIMER_RATE (20 * USEC_PER_MSEC) |
| static unsigned long timer_rate; |
| |
| /* |
| * Wait this long before raising speed above hispeed, by default a single |
| * timer interval. |
| */ |
| #define DEFAULT_ABOVE_HISPEED_DELAY DEFAULT_TIMER_RATE |
| static unsigned long above_hispeed_delay_val; |
| |
| /* |
| * Boost pulse to hispeed on touchscreen input. |
| */ |
| |
| static int input_boost_val; |
| |
| struct cpufreq_interactive_inputopen { |
| struct input_handle *handle; |
| struct work_struct inputopen_work; |
| }; |
| |
| static struct cpufreq_interactive_inputopen inputopen; |
| |
| /* |
| * Non-zero means longer-term speed boost active. |
| */ |
| |
| static int boost_val; |
| |
| static int cpufreq_governor_interactive(struct cpufreq_policy *policy, |
| unsigned int event); |
| |
| #ifndef CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE |
| static |
| #endif |
| struct cpufreq_governor cpufreq_gov_interactive = { |
| .name = "interactive", |
| .governor = cpufreq_governor_interactive, |
| .max_transition_latency = 10000000, |
| .owner = THIS_MODULE, |
| }; |
| |
| static void cpufreq_interactive_timer(unsigned long data) |
| { |
| unsigned int delta_idle; |
| unsigned int delta_time; |
| int cpu_load; |
| int load_since_change; |
| u64 time_in_idle; |
| u64 idle_exit_time; |
| struct cpufreq_interactive_cpuinfo *pcpu = |
| &per_cpu(cpuinfo, data); |
| u64 now_idle; |
| unsigned int new_freq; |
| unsigned int index; |
| unsigned long flags; |
| |
| smp_rmb(); |
| |
| if (!pcpu->governor_enabled) |
| goto exit; |
| |
| /* |
| * Once pcpu->timer_run_time is updated to >= pcpu->idle_exit_time, |
| * this lets idle exit know the current idle time sample has |
| * been processed, and idle exit can generate a new sample and |
| * re-arm the timer. This prevents a concurrent idle |
| * exit on that CPU from writing a new set of info at the same time |
| * the timer function runs (the timer function can't use that info |
| * until more time passes). |
| */ |
| time_in_idle = pcpu->time_in_idle; |
| idle_exit_time = pcpu->idle_exit_time; |
| now_idle = get_cpu_idle_time_us(data, &pcpu->timer_run_time); |
| smp_wmb(); |
| |
| /* If we raced with cancelling a timer, skip. */ |
| if (!idle_exit_time) |
| goto exit; |
| |
| delta_idle = (unsigned int)(now_idle - time_in_idle); |
| delta_time = (unsigned int)(pcpu->timer_run_time - idle_exit_time); |
| |
| /* |
| * If timer ran less than 1ms after short-term sample started, retry. |
| */ |
| if (delta_time < 1000) |
| goto rearm; |
| |
| if (delta_idle > delta_time) |
| cpu_load = 0; |
| else |
| cpu_load = 100 * (delta_time - delta_idle) / delta_time; |
| |
| delta_idle = (unsigned int)(now_idle - pcpu->target_set_time_in_idle); |
| delta_time = (unsigned int)(pcpu->timer_run_time - |
| pcpu->target_set_time); |
| |
| if ((delta_time == 0) || (delta_idle > delta_time)) |
| load_since_change = 0; |
| else |
| load_since_change = |
| 100 * (delta_time - delta_idle) / delta_time; |
| |
| /* |
| * Choose greater of short-term load (since last idle timer |
| * started or timer function re-armed itself) or long-term load |
| * (since last frequency change). |
| */ |
| if (load_since_change > cpu_load) |
| cpu_load = load_since_change; |
| |
| if (cpu_load >= go_hispeed_load || boost_val) { |
| if (pcpu->target_freq <= pcpu->policy->min) { |
| new_freq = hispeed_freq; |
| } else { |
| new_freq = pcpu->policy->max * cpu_load / 100; |
| |
| if (new_freq < hispeed_freq) |
| new_freq = hispeed_freq; |
| |
| if (pcpu->target_freq == hispeed_freq && |
| new_freq > hispeed_freq && |
| pcpu->timer_run_time - pcpu->hispeed_validate_time |
| < above_hispeed_delay_val) { |
| trace_cpufreq_interactive_notyet(data, cpu_load, |
| pcpu->target_freq, |
| new_freq); |
| goto rearm; |
| } |
| } |
| } else { |
| new_freq = pcpu->policy->max * cpu_load / 100; |
| } |
| |
| if (new_freq <= hispeed_freq) |
| pcpu->hispeed_validate_time = pcpu->timer_run_time; |
| |
| if (cpufreq_frequency_table_target(pcpu->policy, pcpu->freq_table, |
| new_freq, CPUFREQ_RELATION_H, |
| &index)) { |
| pr_warn_once("timer %d: cpufreq_frequency_table_target error\n", |
| (int) data); |
| goto rearm; |
| } |
| |
| new_freq = pcpu->freq_table[index].frequency; |
| |
| /* |
| * Do not scale below floor_freq unless we have been at or above the |
| * floor frequency for the minimum sample time since last validated. |
| */ |
| if (new_freq < pcpu->floor_freq) { |
| if (pcpu->timer_run_time - pcpu->floor_validate_time |
| < min_sample_time) { |
| trace_cpufreq_interactive_notyet(data, cpu_load, |
| pcpu->target_freq, new_freq); |
| goto rearm; |
| } |
| } |
| |
| pcpu->floor_freq = new_freq; |
| pcpu->floor_validate_time = pcpu->timer_run_time; |
| |
| if (pcpu->target_freq == new_freq) { |
| trace_cpufreq_interactive_already(data, cpu_load, |
| pcpu->target_freq, new_freq); |
| goto rearm_if_notmax; |
| } |
| |
| trace_cpufreq_interactive_target(data, cpu_load, pcpu->target_freq, |
| new_freq); |
| pcpu->target_set_time_in_idle = now_idle; |
| pcpu->target_set_time = pcpu->timer_run_time; |
| |
| if (new_freq < pcpu->target_freq) { |
| pcpu->target_freq = new_freq; |
| spin_lock_irqsave(&down_cpumask_lock, flags); |
| cpumask_set_cpu(data, &down_cpumask); |
| spin_unlock_irqrestore(&down_cpumask_lock, flags); |
| queue_work(down_wq, &freq_scale_down_work); |
| } else { |
| pcpu->target_freq = new_freq; |
| spin_lock_irqsave(&up_cpumask_lock, flags); |
| cpumask_set_cpu(data, &up_cpumask); |
| spin_unlock_irqrestore(&up_cpumask_lock, flags); |
| wake_up_process(up_task); |
| } |
| |
| rearm_if_notmax: |
| /* |
| * Already set max speed and don't see a need to change that, |
| * wait until next idle to re-evaluate, don't need timer. |
| */ |
| if (pcpu->target_freq == pcpu->policy->max) |
| goto exit; |
| |
| rearm: |
| if (!timer_pending(&pcpu->cpu_timer)) { |
| /* |
| * If already at min: if that CPU is idle, don't set timer. |
| * Else cancel the timer if that CPU goes idle. We don't |
| * need to re-evaluate speed until the next idle exit. |
| */ |
| if (pcpu->target_freq == pcpu->policy->min) { |
| smp_rmb(); |
| |
| if (pcpu->idling) |
| goto exit; |
| |
| pcpu->timer_idlecancel = 1; |
| } |
| |
| pcpu->time_in_idle = get_cpu_idle_time_us( |
| data, &pcpu->idle_exit_time); |
| mod_timer(&pcpu->cpu_timer, |
| jiffies + usecs_to_jiffies(timer_rate)); |
| } |
| |
| exit: |
| return; |
| } |
| |
| static void cpufreq_interactive_idle_start(void) |
| { |
| struct cpufreq_interactive_cpuinfo *pcpu = |
| &per_cpu(cpuinfo, smp_processor_id()); |
| int pending; |
| |
| if (!pcpu->governor_enabled) |
| return; |
| |
| pcpu->idling = 1; |
| smp_wmb(); |
| pending = timer_pending(&pcpu->cpu_timer); |
| |
| if (pcpu->target_freq != pcpu->policy->min) { |
| #ifdef CONFIG_SMP |
| /* |
| * Entering idle while not at lowest speed. On some |
| * platforms this can hold the other CPU(s) at that speed |
| * even though the CPU is idle. Set a timer to re-evaluate |
| * speed so this idle CPU doesn't hold the other CPUs above |
| * min indefinitely. This should probably be a quirk of |
| * the CPUFreq driver. |
| */ |
| if (!pending) { |
| pcpu->time_in_idle = get_cpu_idle_time_us( |
| smp_processor_id(), &pcpu->idle_exit_time); |
| pcpu->timer_idlecancel = 0; |
| mod_timer(&pcpu->cpu_timer, |
| jiffies + usecs_to_jiffies(timer_rate)); |
| } |
| #endif |
| } else { |
| /* |
| * If at min speed and entering idle after load has |
| * already been evaluated, and a timer has been set just in |
| * case the CPU suddenly goes busy, cancel that timer. The |
| * CPU didn't go busy; we'll recheck things upon idle exit. |
| */ |
| if (pending && pcpu->timer_idlecancel) { |
| del_timer(&pcpu->cpu_timer); |
| /* |
| * Ensure last timer run time is after current idle |
| * sample start time, so next idle exit will always |
| * start a new idle sampling period. |
| */ |
| pcpu->idle_exit_time = 0; |
| pcpu->timer_idlecancel = 0; |
| } |
| } |
| |
| } |
| |
| static void cpufreq_interactive_idle_end(void) |
| { |
| struct cpufreq_interactive_cpuinfo *pcpu = |
| &per_cpu(cpuinfo, smp_processor_id()); |
| |
| pcpu->idling = 0; |
| smp_wmb(); |
| |
| /* |
| * Arm the timer for 1-2 ticks later if not already, and if the timer |
| * function has already processed the previous load sampling |
| * interval. (If the timer is not pending but has not processed |
| * the previous interval, it is probably racing with us on another |
| * CPU. Let it compute load based on the previous sample and then |
| * re-arm the timer for another interval when it's done, rather |
| * than updating the interval start time to be "now", which doesn't |
| * give the timer function enough time to make a decision on this |
| * run.) |
| */ |
| if (timer_pending(&pcpu->cpu_timer) == 0 && |
| pcpu->timer_run_time >= pcpu->idle_exit_time && |
| pcpu->governor_enabled) { |
| pcpu->time_in_idle = |
| get_cpu_idle_time_us(smp_processor_id(), |
| &pcpu->idle_exit_time); |
| pcpu->timer_idlecancel = 0; |
| mod_timer(&pcpu->cpu_timer, |
| jiffies + usecs_to_jiffies(timer_rate)); |
| } |
| |
| } |
| |
| static int cpufreq_interactive_up_task(void *data) |
| { |
| unsigned int cpu; |
| cpumask_t tmp_mask; |
| unsigned long flags; |
| struct cpufreq_interactive_cpuinfo *pcpu; |
| |
| while (1) { |
| set_current_state(TASK_INTERRUPTIBLE); |
| spin_lock_irqsave(&up_cpumask_lock, flags); |
| |
| if (cpumask_empty(&up_cpumask)) { |
| spin_unlock_irqrestore(&up_cpumask_lock, flags); |
| schedule(); |
| |
| if (kthread_should_stop()) |
| break; |
| |
| spin_lock_irqsave(&up_cpumask_lock, flags); |
| } |
| |
| set_current_state(TASK_RUNNING); |
| tmp_mask = up_cpumask; |
| cpumask_clear(&up_cpumask); |
| spin_unlock_irqrestore(&up_cpumask_lock, flags); |
| |
| for_each_cpu(cpu, &tmp_mask) { |
| unsigned int j; |
| unsigned int max_freq = 0; |
| |
| pcpu = &per_cpu(cpuinfo, cpu); |
| smp_rmb(); |
| |
| if (!pcpu->governor_enabled) |
| continue; |
| |
| mutex_lock(&set_speed_lock); |
| |
| for_each_cpu(j, pcpu->policy->cpus) { |
| struct cpufreq_interactive_cpuinfo *pjcpu = |
| &per_cpu(cpuinfo, j); |
| |
| if (pjcpu->target_freq > max_freq) |
| max_freq = pjcpu->target_freq; |
| } |
| |
| if (max_freq != pcpu->policy->cur) |
| __cpufreq_driver_target(pcpu->policy, |
| max_freq, |
| CPUFREQ_RELATION_H); |
| mutex_unlock(&set_speed_lock); |
| trace_cpufreq_interactive_up(cpu, pcpu->target_freq, |
| pcpu->policy->cur); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void cpufreq_interactive_freq_down(struct work_struct *work) |
| { |
| unsigned int cpu; |
| cpumask_t tmp_mask; |
| unsigned long flags; |
| struct cpufreq_interactive_cpuinfo *pcpu; |
| |
| spin_lock_irqsave(&down_cpumask_lock, flags); |
| tmp_mask = down_cpumask; |
| cpumask_clear(&down_cpumask); |
| spin_unlock_irqrestore(&down_cpumask_lock, flags); |
| |
| for_each_cpu(cpu, &tmp_mask) { |
| unsigned int j; |
| unsigned int max_freq = 0; |
| |
| pcpu = &per_cpu(cpuinfo, cpu); |
| smp_rmb(); |
| |
| if (!pcpu->governor_enabled) |
| continue; |
| |
| mutex_lock(&set_speed_lock); |
| |
| for_each_cpu(j, pcpu->policy->cpus) { |
| struct cpufreq_interactive_cpuinfo *pjcpu = |
| &per_cpu(cpuinfo, j); |
| |
| if (pjcpu->target_freq > max_freq) |
| max_freq = pjcpu->target_freq; |
| } |
| |
| if (max_freq != pcpu->policy->cur) |
| __cpufreq_driver_target(pcpu->policy, max_freq, |
| CPUFREQ_RELATION_H); |
| |
| mutex_unlock(&set_speed_lock); |
| trace_cpufreq_interactive_down(cpu, pcpu->target_freq, |
| pcpu->policy->cur); |
| } |
| } |
| |
| static void cpufreq_interactive_boost(void) |
| { |
| int i; |
| int anyboost = 0; |
| unsigned long flags; |
| struct cpufreq_interactive_cpuinfo *pcpu; |
| |
| spin_lock_irqsave(&up_cpumask_lock, flags); |
| |
| for_each_online_cpu(i) { |
| pcpu = &per_cpu(cpuinfo, i); |
| |
| if (pcpu->target_freq < hispeed_freq) { |
| pcpu->target_freq = hispeed_freq; |
| cpumask_set_cpu(i, &up_cpumask); |
| pcpu->target_set_time_in_idle = |
| get_cpu_idle_time_us(i, &pcpu->target_set_time); |
| pcpu->hispeed_validate_time = pcpu->target_set_time; |
| anyboost = 1; |
| } |
| |
| /* |
| * Set floor freq and (re)start timer for when last |
| * validated. |
| */ |
| |
| pcpu->floor_freq = hispeed_freq; |
| pcpu->floor_validate_time = ktime_to_us(ktime_get()); |
| } |
| |
| spin_unlock_irqrestore(&up_cpumask_lock, flags); |
| |
| if (anyboost) |
| wake_up_process(up_task); |
| } |
| |
| /* |
| * Pulsed boost on input event raises CPUs to hispeed_freq and lets |
| * usual algorithm of min_sample_time decide when to allow speed |
| * to drop. |
| */ |
| |
| static void cpufreq_interactive_input_event(struct input_handle *handle, |
| unsigned int type, |
| unsigned int code, int value) |
| { |
| if (input_boost_val && type == EV_SYN && code == SYN_REPORT) { |
| trace_cpufreq_interactive_boost("input"); |
| cpufreq_interactive_boost(); |
| } |
| } |
| |
| static void cpufreq_interactive_input_open(struct work_struct *w) |
| { |
| struct cpufreq_interactive_inputopen *io = |
| container_of(w, struct cpufreq_interactive_inputopen, |
| inputopen_work); |
| int error; |
| |
| error = input_open_device(io->handle); |
| if (error) |
| input_unregister_handle(io->handle); |
| } |
| |
| static int cpufreq_interactive_input_connect(struct input_handler *handler, |
| struct input_dev *dev, |
| const struct input_device_id *id) |
| { |
| struct input_handle *handle; |
| int error; |
| |
| pr_info("%s: connect to %s\n", __func__, dev->name); |
| handle = kzalloc(sizeof(struct input_handle), GFP_KERNEL); |
| if (!handle) |
| return -ENOMEM; |
| |
| handle->dev = dev; |
| handle->handler = handler; |
| handle->name = "cpufreq_interactive"; |
| |
| error = input_register_handle(handle); |
| if (error) |
| goto err; |
| |
| inputopen.handle = handle; |
| queue_work(down_wq, &inputopen.inputopen_work); |
| return 0; |
| err: |
| kfree(handle); |
| return error; |
| } |
| |
| static void cpufreq_interactive_input_disconnect(struct input_handle *handle) |
| { |
| input_close_device(handle); |
| input_unregister_handle(handle); |
| kfree(handle); |
| } |
| |
| static const struct input_device_id cpufreq_interactive_ids[] = { |
| { |
| .flags = INPUT_DEVICE_ID_MATCH_EVBIT | |
| INPUT_DEVICE_ID_MATCH_ABSBIT, |
| .evbit = { BIT_MASK(EV_ABS) }, |
| .absbit = { [BIT_WORD(ABS_MT_POSITION_X)] = |
| BIT_MASK(ABS_MT_POSITION_X) | |
| BIT_MASK(ABS_MT_POSITION_Y) }, |
| }, /* multi-touch touchscreen */ |
| { |
| .flags = INPUT_DEVICE_ID_MATCH_KEYBIT | |
| INPUT_DEVICE_ID_MATCH_ABSBIT, |
| .keybit = { [BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH) }, |
| .absbit = { [BIT_WORD(ABS_X)] = |
| BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) }, |
| }, /* touchpad */ |
| { }, |
| }; |
| |
| static struct input_handler cpufreq_interactive_input_handler = { |
| .event = cpufreq_interactive_input_event, |
| .connect = cpufreq_interactive_input_connect, |
| .disconnect = cpufreq_interactive_input_disconnect, |
| .name = "cpufreq_interactive", |
| .id_table = cpufreq_interactive_ids, |
| }; |
| |
| static ssize_t show_hispeed_freq(struct kobject *kobj, |
| struct attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%llu\n", hispeed_freq); |
| } |
| |
| static ssize_t store_hispeed_freq(struct kobject *kobj, |
| struct attribute *attr, const char *buf, |
| size_t count) |
| { |
| int ret; |
| u64 val; |
| |
| ret = strict_strtoull(buf, 0, &val); |
| if (ret < 0) |
| return ret; |
| hispeed_freq = val; |
| return count; |
| } |
| |
| static struct global_attr hispeed_freq_attr = __ATTR(hispeed_freq, 0644, |
| show_hispeed_freq, store_hispeed_freq); |
| |
| |
| static ssize_t show_go_hispeed_load(struct kobject *kobj, |
| struct attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%lu\n", go_hispeed_load); |
| } |
| |
| static ssize_t store_go_hispeed_load(struct kobject *kobj, |
| struct attribute *attr, const char *buf, size_t count) |
| { |
| int ret; |
| unsigned long val; |
| |
| ret = strict_strtoul(buf, 0, &val); |
| if (ret < 0) |
| return ret; |
| go_hispeed_load = val; |
| return count; |
| } |
| |
| static struct global_attr go_hispeed_load_attr = __ATTR(go_hispeed_load, 0644, |
| show_go_hispeed_load, store_go_hispeed_load); |
| |
| static ssize_t show_min_sample_time(struct kobject *kobj, |
| struct attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%lu\n", min_sample_time); |
| } |
| |
| static ssize_t store_min_sample_time(struct kobject *kobj, |
| struct attribute *attr, const char *buf, size_t count) |
| { |
| int ret; |
| unsigned long val; |
| |
| ret = strict_strtoul(buf, 0, &val); |
| if (ret < 0) |
| return ret; |
| min_sample_time = val; |
| return count; |
| } |
| |
| static struct global_attr min_sample_time_attr = __ATTR(min_sample_time, 0644, |
| show_min_sample_time, store_min_sample_time); |
| |
| static ssize_t show_above_hispeed_delay(struct kobject *kobj, |
| struct attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%lu\n", above_hispeed_delay_val); |
| } |
| |
| static ssize_t store_above_hispeed_delay(struct kobject *kobj, |
| struct attribute *attr, |
| const char *buf, size_t count) |
| { |
| int ret; |
| unsigned long val; |
| |
| ret = strict_strtoul(buf, 0, &val); |
| if (ret < 0) |
| return ret; |
| above_hispeed_delay_val = val; |
| return count; |
| } |
| |
| define_one_global_rw(above_hispeed_delay); |
| |
| static ssize_t show_timer_rate(struct kobject *kobj, |
| struct attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%lu\n", timer_rate); |
| } |
| |
| static ssize_t store_timer_rate(struct kobject *kobj, |
| struct attribute *attr, const char *buf, size_t count) |
| { |
| int ret; |
| unsigned long val; |
| |
| ret = strict_strtoul(buf, 0, &val); |
| if (ret < 0) |
| return ret; |
| timer_rate = val; |
| return count; |
| } |
| |
| static struct global_attr timer_rate_attr = __ATTR(timer_rate, 0644, |
| show_timer_rate, store_timer_rate); |
| |
| static ssize_t show_input_boost(struct kobject *kobj, struct attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%u\n", input_boost_val); |
| } |
| |
| static ssize_t store_input_boost(struct kobject *kobj, struct attribute *attr, |
| const char *buf, size_t count) |
| { |
| int ret; |
| unsigned long val; |
| |
| ret = strict_strtoul(buf, 0, &val); |
| if (ret < 0) |
| return ret; |
| input_boost_val = val; |
| return count; |
| } |
| |
| define_one_global_rw(input_boost); |
| |
| static ssize_t show_boost(struct kobject *kobj, struct attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%d\n", boost_val); |
| } |
| |
| static ssize_t store_boost(struct kobject *kobj, struct attribute *attr, |
| const char *buf, size_t count) |
| { |
| int ret; |
| unsigned long val; |
| |
| ret = kstrtoul(buf, 0, &val); |
| if (ret < 0) |
| return ret; |
| |
| boost_val = val; |
| |
| if (boost_val) { |
| trace_cpufreq_interactive_boost("on"); |
| cpufreq_interactive_boost(); |
| } else { |
| trace_cpufreq_interactive_unboost("off"); |
| } |
| |
| return count; |
| } |
| |
| define_one_global_rw(boost); |
| |
| static ssize_t store_boostpulse(struct kobject *kobj, struct attribute *attr, |
| const char *buf, size_t count) |
| { |
| int ret; |
| unsigned long val; |
| |
| ret = kstrtoul(buf, 0, &val); |
| if (ret < 0) |
| return ret; |
| |
| trace_cpufreq_interactive_boost("pulse"); |
| cpufreq_interactive_boost(); |
| return count; |
| } |
| |
| static struct global_attr boostpulse = |
| __ATTR(boostpulse, 0200, NULL, store_boostpulse); |
| |
| static struct attribute *interactive_attributes[] = { |
| &hispeed_freq_attr.attr, |
| &go_hispeed_load_attr.attr, |
| &above_hispeed_delay.attr, |
| &min_sample_time_attr.attr, |
| &timer_rate_attr.attr, |
| &input_boost.attr, |
| &boost.attr, |
| &boostpulse.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group interactive_attr_group = { |
| .attrs = interactive_attributes, |
| .name = "interactive", |
| }; |
| |
| static int cpufreq_governor_interactive(struct cpufreq_policy *policy, |
| unsigned int event) |
| { |
| int rc; |
| unsigned int j; |
| struct cpufreq_interactive_cpuinfo *pcpu; |
| struct cpufreq_frequency_table *freq_table; |
| |
| switch (event) { |
| case CPUFREQ_GOV_START: |
| if (!cpu_online(policy->cpu)) |
| return -EINVAL; |
| |
| freq_table = |
| cpufreq_frequency_get_table(policy->cpu); |
| |
| for_each_cpu(j, policy->cpus) { |
| pcpu = &per_cpu(cpuinfo, j); |
| pcpu->policy = policy; |
| pcpu->target_freq = policy->cur; |
| pcpu->freq_table = freq_table; |
| pcpu->target_set_time_in_idle = |
| get_cpu_idle_time_us(j, |
| &pcpu->target_set_time); |
| pcpu->floor_freq = pcpu->target_freq; |
| pcpu->floor_validate_time = |
| pcpu->target_set_time; |
| pcpu->hispeed_validate_time = |
| pcpu->target_set_time; |
| pcpu->governor_enabled = 1; |
| smp_wmb(); |
| } |
| |
| if (!hispeed_freq) |
| hispeed_freq = policy->max; |
| |
| /* |
| * Do not register the idle hook and create sysfs |
| * entries if we have already done so. |
| */ |
| if (atomic_inc_return(&active_count) > 1) |
| return 0; |
| |
| rc = sysfs_create_group(cpufreq_global_kobject, |
| &interactive_attr_group); |
| if (rc) |
| return rc; |
| |
| rc = input_register_handler(&cpufreq_interactive_input_handler); |
| if (rc) |
| pr_warn("%s: failed to register input handler\n", |
| __func__); |
| |
| break; |
| |
| case CPUFREQ_GOV_STOP: |
| for_each_cpu(j, policy->cpus) { |
| pcpu = &per_cpu(cpuinfo, j); |
| pcpu->governor_enabled = 0; |
| smp_wmb(); |
| del_timer_sync(&pcpu->cpu_timer); |
| |
| /* |
| * Reset idle exit time since we may cancel the timer |
| * before it can run after the last idle exit time, |
| * to avoid tripping the check in idle exit for a timer |
| * that is trying to run. |
| */ |
| pcpu->idle_exit_time = 0; |
| } |
| |
| flush_work(&freq_scale_down_work); |
| if (atomic_dec_return(&active_count) > 0) |
| return 0; |
| |
| input_unregister_handler(&cpufreq_interactive_input_handler); |
| sysfs_remove_group(cpufreq_global_kobject, |
| &interactive_attr_group); |
| |
| break; |
| |
| case CPUFREQ_GOV_LIMITS: |
| if (policy->max < policy->cur) |
| __cpufreq_driver_target(policy, |
| policy->max, CPUFREQ_RELATION_H); |
| else if (policy->min > policy->cur) |
| __cpufreq_driver_target(policy, |
| policy->min, CPUFREQ_RELATION_L); |
| break; |
| } |
| return 0; |
| } |
| |
| static int cpufreq_interactive_idle_notifier(struct notifier_block *nb, |
| unsigned long val, |
| void *data) |
| { |
| switch (val) { |
| case IDLE_START: |
| cpufreq_interactive_idle_start(); |
| break; |
| case IDLE_END: |
| cpufreq_interactive_idle_end(); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static struct notifier_block cpufreq_interactive_idle_nb = { |
| .notifier_call = cpufreq_interactive_idle_notifier, |
| }; |
| |
| static int __init cpufreq_interactive_init(void) |
| { |
| unsigned int i; |
| struct cpufreq_interactive_cpuinfo *pcpu; |
| struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 }; |
| |
| go_hispeed_load = DEFAULT_GO_HISPEED_LOAD; |
| min_sample_time = DEFAULT_MIN_SAMPLE_TIME; |
| above_hispeed_delay_val = DEFAULT_ABOVE_HISPEED_DELAY; |
| timer_rate = DEFAULT_TIMER_RATE; |
| |
| /* Initalize per-cpu timers */ |
| for_each_possible_cpu(i) { |
| pcpu = &per_cpu(cpuinfo, i); |
| init_timer(&pcpu->cpu_timer); |
| pcpu->cpu_timer.function = cpufreq_interactive_timer; |
| pcpu->cpu_timer.data = i; |
| } |
| |
| up_task = kthread_create(cpufreq_interactive_up_task, NULL, |
| "kinteractiveup"); |
| if (IS_ERR(up_task)) |
| return PTR_ERR(up_task); |
| |
| sched_setscheduler_nocheck(up_task, SCHED_FIFO, ¶m); |
| get_task_struct(up_task); |
| |
| /* No rescuer thread, bind to CPU queuing the work for possibly |
| warm cache (probably doesn't matter much). */ |
| down_wq = alloc_workqueue("knteractive_down", 0, 1); |
| |
| if (!down_wq) |
| goto err_freeuptask; |
| |
| INIT_WORK(&freq_scale_down_work, |
| cpufreq_interactive_freq_down); |
| |
| spin_lock_init(&up_cpumask_lock); |
| spin_lock_init(&down_cpumask_lock); |
| mutex_init(&set_speed_lock); |
| |
| idle_notifier_register(&cpufreq_interactive_idle_nb); |
| INIT_WORK(&inputopen.inputopen_work, cpufreq_interactive_input_open); |
| return cpufreq_register_governor(&cpufreq_gov_interactive); |
| |
| err_freeuptask: |
| put_task_struct(up_task); |
| return -ENOMEM; |
| } |
| |
| #ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_INTERACTIVE |
| fs_initcall(cpufreq_interactive_init); |
| #else |
| module_init(cpufreq_interactive_init); |
| #endif |
| |
| static void __exit cpufreq_interactive_exit(void) |
| { |
| cpufreq_unregister_governor(&cpufreq_gov_interactive); |
| kthread_stop(up_task); |
| put_task_struct(up_task); |
| destroy_workqueue(down_wq); |
| } |
| |
| module_exit(cpufreq_interactive_exit); |
| |
| MODULE_AUTHOR("Mike Chan <mike@android.com>"); |
| MODULE_DESCRIPTION("'cpufreq_interactive' - A cpufreq governor for " |
| "Latency sensitive workloads"); |
| MODULE_LICENSE("GPL"); |