| /* Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #define pr_fmt(fmt) "%s: " fmt, __func__ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/platform_device.h> |
| #include <linux/leds.h> |
| #include <linux/workqueue.h> |
| #include <linux/err.h> |
| |
| #include <linux/mfd/pm8xxx/core.h> |
| #include <linux/mfd/pm8xxx/pwm.h> |
| #include <linux/leds-pm8xxx.h> |
| |
| #define SSBI_REG_ADDR_DRV_KEYPAD 0x48 |
| #define PM8XXX_DRV_KEYPAD_BL_MASK 0xf0 |
| #define PM8XXX_DRV_KEYPAD_BL_SHIFT 0x04 |
| |
| #define SSBI_REG_ADDR_FLASH_DRV0 0x49 |
| #define PM8XXX_DRV_FLASH_MASK 0xf0 |
| #define PM8XXX_DRV_FLASH_SHIFT 0x04 |
| |
| #define SSBI_REG_ADDR_FLASH_DRV1 0xFB |
| |
| #define SSBI_REG_ADDR_LED_CTRL_BASE 0x131 |
| #define SSBI_REG_ADDR_LED_CTRL(n) (SSBI_REG_ADDR_LED_CTRL_BASE + (n)) |
| #define PM8XXX_DRV_LED_CTRL_MASK 0xf8 |
| #define PM8XXX_DRV_LED_CTRL_SHIFT 0x03 |
| |
| #define SSBI_REG_ADDR_WLED_CTRL_BASE 0x25A |
| #define SSBI_REG_ADDR_WLED_CTRL(n) (SSBI_REG_ADDR_WLED_CTRL_BASE + (n) - 1) |
| |
| /* wled control registers */ |
| #define WLED_MOD_CTRL_REG SSBI_REG_ADDR_WLED_CTRL(1) |
| #define WLED_MAX_CURR_CFG_REG(n) SSBI_REG_ADDR_WLED_CTRL(n + 2) |
| #define WLED_BRIGHTNESS_CNTL_REG1(n) SSBI_REG_ADDR_WLED_CTRL(n + 5) |
| #define WLED_BRIGHTNESS_CNTL_REG2(n) SSBI_REG_ADDR_WLED_CTRL(n + 6) |
| #define WLED_SYNC_REG SSBI_REG_ADDR_WLED_CTRL(11) |
| #define WLED_OVP_CFG_REG SSBI_REG_ADDR_WLED_CTRL(13) |
| #define WLED_BOOST_CFG_REG SSBI_REG_ADDR_WLED_CTRL(14) |
| #define WLED_HIGH_POLE_CAP_REG SSBI_REG_ADDR_WLED_CTRL(16) |
| |
| #define WLED_STRINGS 0x03 |
| #define WLED_OVP_VAL_MASK 0x30 |
| #define WLED_OVP_VAL_BIT_SHFT 0x04 |
| #define WLED_BOOST_LIMIT_MASK 0xE0 |
| #define WLED_BOOST_LIMIT_BIT_SHFT 0x05 |
| #define WLED_BOOST_OFF 0x00 |
| #define WLED_EN_MASK 0x01 |
| #define WLED_CP_SELECT_MAX 0x03 |
| #define WLED_CP_SELECT_MASK 0x03 |
| #define WLED_DIG_MOD_GEN_MASK 0x70 |
| #define WLED_CS_OUT_MASK 0x0E |
| #define WLED_CTL_DLY_STEP 200 |
| #define WLED_CTL_DLY_MAX 1400 |
| #define WLED_CTL_DLY_MASK 0xE0 |
| #define WLED_CTL_DLY_BIT_SHFT 0x05 |
| #define WLED_MAX_CURR 25 |
| #define WLED_MAX_CURR_MASK 0x1F |
| #define WLED_OP_FDBCK_MASK 0x1C |
| #define WLED_OP_FDBCK_BIT_SHFT 0x02 |
| |
| #define WLED_MAX_LEVEL 255 |
| #define WLED_8_BIT_MASK 0xFF |
| #define WLED_8_BIT_SHFT 0x08 |
| #define WLED_MAX_DUTY_CYCLE 0xFFF |
| |
| #define WLED_SYNC_VAL 0x07 |
| #define WLED_SYNC_RESET_VAL 0x00 |
| |
| #define SSBI_REG_ADDR_RGB_CNTL1 0x12D |
| #define SSBI_REG_ADDR_RGB_CNTL2 0x12E |
| |
| #define PM8XXX_DRV_RGB_RED_LED BIT(2) |
| #define PM8XXX_DRV_RGB_GREEN_LED BIT(1) |
| #define PM8XXX_DRV_RGB_BLUE_LED BIT(0) |
| |
| #define MAX_FLASH_LED_CURRENT 300 |
| #define MAX_LC_LED_CURRENT 40 |
| #define MAX_KP_BL_LED_CURRENT 300 |
| |
| #define PM8XXX_ID_LED_CURRENT_FACTOR 2 /* Iout = x * 2mA */ |
| #define PM8XXX_ID_FLASH_CURRENT_FACTOR 20 /* Iout = x * 20mA */ |
| |
| #define PM8XXX_FLASH_MODE_DBUS1 1 |
| #define PM8XXX_FLASH_MODE_DBUS2 2 |
| #define PM8XXX_FLASH_MODE_PWM 3 |
| |
| #define MAX_LC_LED_BRIGHTNESS 20 |
| #define MAX_FLASH_BRIGHTNESS 15 |
| #define MAX_KB_LED_BRIGHTNESS 15 |
| |
| #define PM8XXX_LED_OFFSET(id) ((id) - PM8XXX_ID_LED_0) |
| |
| #define PM8XXX_LED_PWM_FLAGS (PM_PWM_LUT_LOOP | PM_PWM_LUT_RAMP_UP) |
| |
| #define LED_MAP(_version, _kb, _led0, _led1, _led2, _flash_led0, _flash_led1, \ |
| _wled, _rgb_led_red, _rgb_led_green, _rgb_led_blue)\ |
| {\ |
| .version = _version,\ |
| .supported = _kb << PM8XXX_ID_LED_KB_LIGHT | \ |
| _led0 << PM8XXX_ID_LED_0 | _led1 << PM8XXX_ID_LED_1 | \ |
| _led2 << PM8XXX_ID_LED_2 | \ |
| _flash_led0 << PM8XXX_ID_FLASH_LED_0 | \ |
| _flash_led1 << PM8XXX_ID_FLASH_LED_1 | \ |
| _wled << PM8XXX_ID_WLED | \ |
| _rgb_led_red << PM8XXX_ID_RGB_LED_RED | \ |
| _rgb_led_green << PM8XXX_ID_RGB_LED_GREEN | \ |
| _rgb_led_blue << PM8XXX_ID_RGB_LED_BLUE, \ |
| } |
| |
| /** |
| * supported_leds - leds supported for each PMIC version |
| * @version - version of PMIC |
| * @supported - which leds are supported on version |
| */ |
| |
| struct supported_leds { |
| enum pm8xxx_version version; |
| u32 supported; |
| }; |
| |
| static const struct supported_leds led_map[] = { |
| LED_MAP(PM8XXX_VERSION_8058, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0), |
| LED_MAP(PM8XXX_VERSION_8921, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0), |
| LED_MAP(PM8XXX_VERSION_8018, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0), |
| LED_MAP(PM8XXX_VERSION_8922, 0, 0, 0, 0, 1, 1, 1, 1, 1, 1), |
| LED_MAP(PM8XXX_VERSION_8038, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1), |
| }; |
| |
| /** |
| * struct pm8xxx_led_data - internal led data structure |
| * @led_classdev - led class device |
| * @id - led index |
| * @work - workqueue for led |
| * @lock - to protect the transactions |
| * @reg - cached value of led register |
| * @pwm_dev - pointer to PWM device if LED is driven using PWM |
| * @pwm_channel - PWM channel ID |
| * @pwm_period_us - PWM period in micro seconds |
| * @pwm_duty_cycles - struct that describes PWM duty cycles info |
| */ |
| struct pm8xxx_led_data { |
| struct led_classdev cdev; |
| int id; |
| u8 reg; |
| u8 wled_mod_ctrl_val; |
| struct device *dev; |
| struct work_struct work; |
| struct mutex lock; |
| struct pwm_device *pwm_dev; |
| int pwm_channel; |
| u32 pwm_period_us; |
| struct pm8xxx_pwm_duty_cycles *pwm_duty_cycles; |
| struct wled_config_data *wled_cfg; |
| int max_current; |
| }; |
| |
| static void led_kp_set(struct pm8xxx_led_data *led, enum led_brightness value) |
| { |
| int rc; |
| u8 level; |
| |
| level = (value << PM8XXX_DRV_KEYPAD_BL_SHIFT) & |
| PM8XXX_DRV_KEYPAD_BL_MASK; |
| |
| led->reg &= ~PM8XXX_DRV_KEYPAD_BL_MASK; |
| led->reg |= level; |
| |
| rc = pm8xxx_writeb(led->dev->parent, SSBI_REG_ADDR_DRV_KEYPAD, |
| led->reg); |
| if (rc < 0) |
| dev_err(led->cdev.dev, |
| "can't set keypad backlight level rc=%d\n", rc); |
| } |
| |
| static void led_lc_set(struct pm8xxx_led_data *led, enum led_brightness value) |
| { |
| int rc, offset; |
| u8 level; |
| |
| level = (value << PM8XXX_DRV_LED_CTRL_SHIFT) & |
| PM8XXX_DRV_LED_CTRL_MASK; |
| |
| offset = PM8XXX_LED_OFFSET(led->id); |
| |
| led->reg &= ~PM8XXX_DRV_LED_CTRL_MASK; |
| led->reg |= level; |
| |
| rc = pm8xxx_writeb(led->dev->parent, SSBI_REG_ADDR_LED_CTRL(offset), |
| led->reg); |
| if (rc) |
| dev_err(led->cdev.dev, "can't set (%d) led value rc=%d\n", |
| led->id, rc); |
| } |
| |
| static void |
| led_flash_set(struct pm8xxx_led_data *led, enum led_brightness value) |
| { |
| int rc; |
| u8 level; |
| u16 reg_addr; |
| |
| level = (value << PM8XXX_DRV_FLASH_SHIFT) & |
| PM8XXX_DRV_FLASH_MASK; |
| |
| led->reg &= ~PM8XXX_DRV_FLASH_MASK; |
| led->reg |= level; |
| |
| if (led->id == PM8XXX_ID_FLASH_LED_0) |
| reg_addr = SSBI_REG_ADDR_FLASH_DRV0; |
| else |
| reg_addr = SSBI_REG_ADDR_FLASH_DRV1; |
| |
| rc = pm8xxx_writeb(led->dev->parent, reg_addr, led->reg); |
| if (rc < 0) |
| dev_err(led->cdev.dev, "can't set flash led%d level rc=%d\n", |
| led->id, rc); |
| } |
| |
| static int |
| led_wled_set(struct pm8xxx_led_data *led, enum led_brightness value) |
| { |
| int rc, duty; |
| u8 val, i, num_wled_strings; |
| |
| if (value > WLED_MAX_LEVEL) |
| value = WLED_MAX_LEVEL; |
| |
| if (value == 0) { |
| rc = pm8xxx_writeb(led->dev->parent, WLED_MOD_CTRL_REG, |
| WLED_BOOST_OFF); |
| if (rc) { |
| dev_err(led->dev->parent, "can't write wled ctrl config" |
| " register rc=%d\n", rc); |
| return rc; |
| } |
| } else { |
| rc = pm8xxx_writeb(led->dev->parent, WLED_MOD_CTRL_REG, |
| led->wled_mod_ctrl_val); |
| if (rc) { |
| dev_err(led->dev->parent, "can't write wled ctrl config" |
| " register rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| duty = (WLED_MAX_DUTY_CYCLE * value) / WLED_MAX_LEVEL; |
| |
| num_wled_strings = led->wled_cfg->num_strings; |
| |
| /* program brightness control registers */ |
| for (i = 0; i < num_wled_strings; i++) { |
| rc = pm8xxx_readb(led->dev->parent, |
| WLED_BRIGHTNESS_CNTL_REG1(i), &val); |
| if (rc) { |
| dev_err(led->dev->parent, "can't read wled brightnes ctrl" |
| " register1 rc=%d\n", rc); |
| return rc; |
| } |
| |
| val = (val & ~WLED_MAX_CURR_MASK) | (duty >> WLED_8_BIT_SHFT); |
| rc = pm8xxx_writeb(led->dev->parent, |
| WLED_BRIGHTNESS_CNTL_REG1(i), val); |
| if (rc) { |
| dev_err(led->dev->parent, "can't write wled brightness ctrl" |
| " register1 rc=%d\n", rc); |
| return rc; |
| } |
| |
| val = duty & WLED_8_BIT_MASK; |
| rc = pm8xxx_writeb(led->dev->parent, |
| WLED_BRIGHTNESS_CNTL_REG2(i), val); |
| if (rc) { |
| dev_err(led->dev->parent, "can't write wled brightness ctrl" |
| " register2 rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| /* sync */ |
| val = WLED_SYNC_VAL; |
| rc = pm8xxx_writeb(led->dev->parent, WLED_SYNC_REG, val); |
| if (rc) { |
| dev_err(led->dev->parent, |
| "can't read wled sync register rc=%d\n", rc); |
| return rc; |
| } |
| |
| val = WLED_SYNC_RESET_VAL; |
| rc = pm8xxx_writeb(led->dev->parent, WLED_SYNC_REG, val); |
| if (rc) { |
| dev_err(led->dev->parent, |
| "can't read wled sync register rc=%d\n", rc); |
| return rc; |
| } |
| return 0; |
| } |
| |
| static void wled_dump_regs(struct pm8xxx_led_data *led) |
| { |
| int i; |
| u8 val; |
| |
| for (i = 1; i < 17; i++) { |
| pm8xxx_readb(led->dev->parent, |
| SSBI_REG_ADDR_WLED_CTRL(i), &val); |
| pr_debug("WLED_CTRL_%d = 0x%x\n", i, val); |
| } |
| } |
| |
| static void |
| led_rgb_write(struct pm8xxx_led_data *led, u16 addr, enum led_brightness value) |
| { |
| int rc; |
| u8 val, mask; |
| |
| if (led->id != PM8XXX_ID_RGB_LED_BLUE && |
| led->id != PM8XXX_ID_RGB_LED_RED && |
| led->id != PM8XXX_ID_RGB_LED_GREEN) |
| return; |
| |
| rc = pm8xxx_readb(led->dev->parent, addr, &val); |
| if (rc) { |
| dev_err(led->cdev.dev, "can't read rgb ctrl register rc=%d\n", |
| rc); |
| return; |
| } |
| |
| switch (led->id) { |
| case PM8XXX_ID_RGB_LED_RED: |
| mask = PM8XXX_DRV_RGB_RED_LED; |
| break; |
| case PM8XXX_ID_RGB_LED_GREEN: |
| mask = PM8XXX_DRV_RGB_GREEN_LED; |
| break; |
| case PM8XXX_ID_RGB_LED_BLUE: |
| mask = PM8XXX_DRV_RGB_BLUE_LED; |
| break; |
| default: |
| return; |
| } |
| |
| if (value) |
| val |= mask; |
| else |
| val &= ~mask; |
| |
| rc = pm8xxx_writeb(led->dev->parent, addr, val); |
| if (rc < 0) |
| dev_err(led->cdev.dev, "can't set rgb led %d level rc=%d\n", |
| led->id, rc); |
| } |
| |
| static void |
| led_rgb_set(struct pm8xxx_led_data *led, enum led_brightness value) |
| { |
| if (value) { |
| led_rgb_write(led, SSBI_REG_ADDR_RGB_CNTL1, value); |
| led_rgb_write(led, SSBI_REG_ADDR_RGB_CNTL2, value); |
| } else { |
| led_rgb_write(led, SSBI_REG_ADDR_RGB_CNTL2, value); |
| led_rgb_write(led, SSBI_REG_ADDR_RGB_CNTL1, value); |
| } |
| } |
| |
| static int pm8xxx_led_pwm_work(struct pm8xxx_led_data *led) |
| { |
| int duty_us; |
| int rc = 0; |
| |
| if (led->pwm_duty_cycles == NULL) { |
| duty_us = (led->pwm_period_us * led->cdev.brightness) / |
| LED_FULL; |
| rc = pwm_config(led->pwm_dev, duty_us, led->pwm_period_us); |
| if (led->cdev.brightness) { |
| led_rgb_write(led, SSBI_REG_ADDR_RGB_CNTL1, |
| led->cdev.brightness); |
| rc = pwm_enable(led->pwm_dev); |
| } else { |
| pwm_disable(led->pwm_dev); |
| led_rgb_write(led, SSBI_REG_ADDR_RGB_CNTL1, |
| led->cdev.brightness); |
| } |
| } else { |
| if (led->cdev.brightness) |
| led_rgb_write(led, SSBI_REG_ADDR_RGB_CNTL1, |
| led->cdev.brightness); |
| rc = pm8xxx_pwm_lut_enable(led->pwm_dev, led->cdev.brightness); |
| if (!led->cdev.brightness) |
| led_rgb_write(led, SSBI_REG_ADDR_RGB_CNTL1, |
| led->cdev.brightness); |
| } |
| |
| return rc; |
| } |
| |
| static void __pm8xxx_led_work(struct pm8xxx_led_data *led, |
| enum led_brightness level) |
| { |
| int rc; |
| |
| mutex_lock(&led->lock); |
| |
| switch (led->id) { |
| case PM8XXX_ID_LED_KB_LIGHT: |
| led_kp_set(led, level); |
| break; |
| case PM8XXX_ID_LED_0: |
| case PM8XXX_ID_LED_1: |
| case PM8XXX_ID_LED_2: |
| led_lc_set(led, level); |
| break; |
| case PM8XXX_ID_FLASH_LED_0: |
| case PM8XXX_ID_FLASH_LED_1: |
| led_flash_set(led, level); |
| break; |
| case PM8XXX_ID_WLED: |
| rc = led_wled_set(led, level); |
| if (rc < 0) |
| pr_err("wled brightness set failed %d\n", rc); |
| break; |
| case PM8XXX_ID_RGB_LED_RED: |
| case PM8XXX_ID_RGB_LED_GREEN: |
| case PM8XXX_ID_RGB_LED_BLUE: |
| led_rgb_set(led, level); |
| break; |
| default: |
| dev_err(led->cdev.dev, "unknown led id %d", led->id); |
| break; |
| } |
| |
| mutex_unlock(&led->lock); |
| } |
| |
| static void pm8xxx_led_work(struct work_struct *work) |
| { |
| int rc; |
| |
| struct pm8xxx_led_data *led = container_of(work, |
| struct pm8xxx_led_data, work); |
| |
| if (led->pwm_dev == NULL) { |
| __pm8xxx_led_work(led, led->cdev.brightness); |
| } else { |
| rc = pm8xxx_led_pwm_work(led); |
| if (rc) |
| pr_err("could not configure PWM mode for LED:%d\n", |
| led->id); |
| } |
| } |
| |
| static void pm8xxx_led_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct pm8xxx_led_data *led; |
| |
| led = container_of(led_cdev, struct pm8xxx_led_data, cdev); |
| |
| if (value < LED_OFF || value > led->cdev.max_brightness) { |
| dev_err(led->cdev.dev, "Invalid brightness value exceeds"); |
| return; |
| } |
| |
| led->cdev.brightness = value; |
| schedule_work(&led->work); |
| } |
| |
| static int pm8xxx_set_led_mode_and_max_brightness(struct pm8xxx_led_data *led, |
| enum pm8xxx_led_modes led_mode, int max_current) |
| { |
| switch (led->id) { |
| case PM8XXX_ID_LED_0: |
| case PM8XXX_ID_LED_1: |
| case PM8XXX_ID_LED_2: |
| led->cdev.max_brightness = max_current / |
| PM8XXX_ID_LED_CURRENT_FACTOR; |
| if (led->cdev.max_brightness > MAX_LC_LED_BRIGHTNESS) |
| led->cdev.max_brightness = MAX_LC_LED_BRIGHTNESS; |
| led->reg = led_mode; |
| break; |
| case PM8XXX_ID_LED_KB_LIGHT: |
| case PM8XXX_ID_FLASH_LED_0: |
| case PM8XXX_ID_FLASH_LED_1: |
| led->cdev.max_brightness = max_current / |
| PM8XXX_ID_FLASH_CURRENT_FACTOR; |
| if (led->cdev.max_brightness > MAX_FLASH_BRIGHTNESS) |
| led->cdev.max_brightness = MAX_FLASH_BRIGHTNESS; |
| |
| switch (led_mode) { |
| case PM8XXX_LED_MODE_PWM1: |
| case PM8XXX_LED_MODE_PWM2: |
| case PM8XXX_LED_MODE_PWM3: |
| led->reg = PM8XXX_FLASH_MODE_PWM; |
| break; |
| case PM8XXX_LED_MODE_DTEST1: |
| led->reg = PM8XXX_FLASH_MODE_DBUS1; |
| break; |
| case PM8XXX_LED_MODE_DTEST2: |
| led->reg = PM8XXX_FLASH_MODE_DBUS2; |
| break; |
| default: |
| led->reg = PM8XXX_LED_MODE_MANUAL; |
| break; |
| } |
| break; |
| case PM8XXX_ID_WLED: |
| led->cdev.max_brightness = WLED_MAX_LEVEL; |
| break; |
| case PM8XXX_ID_RGB_LED_RED: |
| case PM8XXX_ID_RGB_LED_GREEN: |
| case PM8XXX_ID_RGB_LED_BLUE: |
| led->cdev.max_brightness = LED_FULL; |
| break; |
| default: |
| dev_err(led->cdev.dev, "LED Id is invalid"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static enum led_brightness pm8xxx_led_get(struct led_classdev *led_cdev) |
| { |
| struct pm8xxx_led_data *led; |
| |
| led = container_of(led_cdev, struct pm8xxx_led_data, cdev); |
| |
| return led->cdev.brightness; |
| } |
| |
| static int __devinit init_wled(struct pm8xxx_led_data *led) |
| { |
| int rc, i; |
| u8 val, num_wled_strings; |
| |
| num_wled_strings = led->wled_cfg->num_strings; |
| |
| /* program over voltage protection threshold */ |
| if (led->wled_cfg->ovp_val > WLED_OVP_37V) { |
| dev_err(led->dev->parent, "Invalid ovp value"); |
| return -EINVAL; |
| } |
| |
| rc = pm8xxx_readb(led->dev->parent, WLED_OVP_CFG_REG, &val); |
| if (rc) { |
| dev_err(led->dev->parent, "can't read wled ovp config" |
| " register rc=%d\n", rc); |
| return rc; |
| } |
| |
| val = (val & ~WLED_OVP_VAL_MASK) | |
| (led->wled_cfg->ovp_val << WLED_OVP_VAL_BIT_SHFT); |
| |
| rc = pm8xxx_writeb(led->dev->parent, WLED_OVP_CFG_REG, val); |
| if (rc) { |
| dev_err(led->dev->parent, "can't write wled ovp config" |
| " register rc=%d\n", rc); |
| return rc; |
| } |
| |
| /* program current boost limit and output feedback*/ |
| if (led->wled_cfg->boost_curr_lim > WLED_CURR_LIMIT_1680mA) { |
| dev_err(led->dev->parent, "Invalid boost current limit"); |
| return -EINVAL; |
| } |
| |
| rc = pm8xxx_readb(led->dev->parent, WLED_BOOST_CFG_REG, &val); |
| if (rc) { |
| dev_err(led->dev->parent, "can't read wled boost config" |
| " register rc=%d\n", rc); |
| return rc; |
| } |
| |
| val = (val & ~WLED_BOOST_LIMIT_MASK) | |
| (led->wled_cfg->boost_curr_lim << WLED_BOOST_LIMIT_BIT_SHFT); |
| |
| val = (val & ~WLED_OP_FDBCK_MASK) | |
| (led->wled_cfg->op_fdbck << WLED_OP_FDBCK_BIT_SHFT); |
| |
| rc = pm8xxx_writeb(led->dev->parent, WLED_BOOST_CFG_REG, val); |
| if (rc) { |
| dev_err(led->dev->parent, "can't write wled boost config" |
| " register rc=%d\n", rc); |
| return rc; |
| } |
| |
| /* program high pole capacitance */ |
| if (led->wled_cfg->cp_select > WLED_CP_SELECT_MAX) { |
| dev_err(led->dev->parent, "Invalid pole capacitance"); |
| return -EINVAL; |
| } |
| |
| rc = pm8xxx_readb(led->dev->parent, WLED_HIGH_POLE_CAP_REG, &val); |
| if (rc) { |
| dev_err(led->dev->parent, "can't read wled high pole" |
| " capacitance register rc=%d\n", rc); |
| return rc; |
| } |
| |
| val = (val & ~WLED_CP_SELECT_MASK) | led->wled_cfg->cp_select; |
| |
| rc = pm8xxx_writeb(led->dev->parent, WLED_HIGH_POLE_CAP_REG, val); |
| if (rc) { |
| dev_err(led->dev->parent, "can't write wled high pole" |
| " capacitance register rc=%d\n", rc); |
| return rc; |
| } |
| |
| /* program activation delay and maximum current */ |
| for (i = 0; i < num_wled_strings; i++) { |
| rc = pm8xxx_readb(led->dev->parent, |
| WLED_MAX_CURR_CFG_REG(i + 2), &val); |
| if (rc) { |
| dev_err(led->dev->parent, "can't read wled max current" |
| " config register rc=%d\n", rc); |
| return rc; |
| } |
| |
| if ((led->wled_cfg->ctrl_delay_us % WLED_CTL_DLY_STEP) || |
| (led->wled_cfg->ctrl_delay_us > WLED_CTL_DLY_MAX)) { |
| dev_err(led->dev->parent, "Invalid control delay\n"); |
| return rc; |
| } |
| |
| val = val / WLED_CTL_DLY_STEP; |
| val = (val & ~WLED_CTL_DLY_MASK) | |
| (led->wled_cfg->ctrl_delay_us << WLED_CTL_DLY_BIT_SHFT); |
| |
| if ((led->max_current > WLED_MAX_CURR)) { |
| dev_err(led->dev->parent, "Invalid max current\n"); |
| return -EINVAL; |
| } |
| |
| val = (val & ~WLED_MAX_CURR_MASK) | led->max_current; |
| |
| rc = pm8xxx_writeb(led->dev->parent, |
| WLED_MAX_CURR_CFG_REG(i + 2), val); |
| if (rc) { |
| dev_err(led->dev->parent, "can't write wled max current" |
| " config register rc=%d\n", rc); |
| return rc; |
| } |
| } |
| |
| /* program digital module generator, cs out and enable the module */ |
| rc = pm8xxx_readb(led->dev->parent, WLED_MOD_CTRL_REG, &val); |
| if (rc) { |
| dev_err(led->dev->parent, "can't read wled module ctrl" |
| " register rc=%d\n", rc); |
| return rc; |
| } |
| |
| if (led->wled_cfg->dig_mod_gen_en) |
| val |= WLED_DIG_MOD_GEN_MASK; |
| |
| if (led->wled_cfg->cs_out_en) |
| val |= WLED_CS_OUT_MASK; |
| |
| val |= WLED_EN_MASK; |
| |
| rc = pm8xxx_writeb(led->dev->parent, WLED_MOD_CTRL_REG, val); |
| if (rc) { |
| dev_err(led->dev->parent, "can't write wled module ctrl" |
| " register rc=%d\n", rc); |
| return rc; |
| } |
| led->wled_mod_ctrl_val = val; |
| |
| /* dump wled registers */ |
| wled_dump_regs(led); |
| |
| return 0; |
| } |
| |
| static int __devinit get_init_value(struct pm8xxx_led_data *led, u8 *val) |
| { |
| int rc, offset; |
| u16 addr; |
| |
| switch (led->id) { |
| case PM8XXX_ID_LED_KB_LIGHT: |
| addr = SSBI_REG_ADDR_DRV_KEYPAD; |
| break; |
| case PM8XXX_ID_LED_0: |
| case PM8XXX_ID_LED_1: |
| case PM8XXX_ID_LED_2: |
| offset = PM8XXX_LED_OFFSET(led->id); |
| addr = SSBI_REG_ADDR_LED_CTRL(offset); |
| break; |
| case PM8XXX_ID_FLASH_LED_0: |
| addr = SSBI_REG_ADDR_FLASH_DRV0; |
| break; |
| case PM8XXX_ID_FLASH_LED_1: |
| addr = SSBI_REG_ADDR_FLASH_DRV1; |
| break; |
| case PM8XXX_ID_WLED: |
| rc = init_wled(led); |
| if (rc) |
| dev_err(led->cdev.dev, "can't initialize wled rc=%d\n", |
| rc); |
| return rc; |
| case PM8XXX_ID_RGB_LED_RED: |
| case PM8XXX_ID_RGB_LED_GREEN: |
| case PM8XXX_ID_RGB_LED_BLUE: |
| addr = SSBI_REG_ADDR_RGB_CNTL1; |
| break; |
| default: |
| dev_err(led->cdev.dev, "unknown led id %d", led->id); |
| return -EINVAL; |
| } |
| |
| rc = pm8xxx_readb(led->dev->parent, addr, val); |
| if (rc) |
| dev_err(led->cdev.dev, "can't get led(%d) level rc=%d\n", |
| led->id, rc); |
| |
| return rc; |
| } |
| |
| static int pm8xxx_led_pwm_configure(struct pm8xxx_led_data *led) |
| { |
| int start_idx, idx_len, duty_us, rc; |
| |
| led->pwm_dev = pwm_request(led->pwm_channel, |
| led->cdev.name); |
| |
| if (IS_ERR_OR_NULL(led->pwm_dev)) { |
| pr_err("could not acquire PWM Channel %d, " |
| "error %ld\n", led->pwm_channel, |
| PTR_ERR(led->pwm_dev)); |
| led->pwm_dev = NULL; |
| return -ENODEV; |
| } |
| |
| if (led->pwm_duty_cycles != NULL) { |
| start_idx = led->pwm_duty_cycles->start_idx; |
| idx_len = led->pwm_duty_cycles->num_duty_pcts; |
| |
| if (idx_len >= PM_PWM_LUT_SIZE && start_idx) { |
| pr_err("Wrong LUT size or index\n"); |
| return -EINVAL; |
| } |
| if ((start_idx + idx_len) > PM_PWM_LUT_SIZE) { |
| pr_err("Exceed LUT limit\n"); |
| return -EINVAL; |
| } |
| |
| rc = pm8xxx_pwm_lut_config(led->pwm_dev, led->pwm_period_us, |
| led->pwm_duty_cycles->duty_pcts, |
| led->pwm_duty_cycles->duty_ms, |
| start_idx, idx_len, 0, 0, |
| PM8XXX_LED_PWM_FLAGS); |
| } else { |
| duty_us = led->pwm_period_us; |
| rc = pwm_config(led->pwm_dev, duty_us, led->pwm_period_us); |
| } |
| |
| return rc; |
| } |
| |
| |
| static int __devinit pm8xxx_led_probe(struct platform_device *pdev) |
| { |
| const struct pm8xxx_led_platform_data *pdata = pdev->dev.platform_data; |
| const struct led_platform_data *pcore_data; |
| struct led_info *curr_led; |
| struct pm8xxx_led_data *led, *led_dat; |
| struct pm8xxx_led_config *led_cfg; |
| enum pm8xxx_version version; |
| bool found = false; |
| int rc, i, j; |
| |
| if (pdata == NULL) { |
| dev_err(&pdev->dev, "platform data not supplied\n"); |
| return -EINVAL; |
| } |
| |
| pcore_data = pdata->led_core; |
| |
| if (pcore_data->num_leds != pdata->num_configs) { |
| dev_err(&pdev->dev, "#no. of led configs and #no. of led" |
| "entries are not equal\n"); |
| return -EINVAL; |
| } |
| |
| led = kcalloc(pcore_data->num_leds, sizeof(*led), GFP_KERNEL); |
| if (led == NULL) { |
| dev_err(&pdev->dev, "failed to alloc memory\n"); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < pcore_data->num_leds; i++) { |
| curr_led = &pcore_data->leds[i]; |
| led_dat = &led[i]; |
| led_cfg = &pdata->configs[i]; |
| |
| led_dat->id = led_cfg->id; |
| led_dat->pwm_channel = led_cfg->pwm_channel; |
| led_dat->pwm_period_us = led_cfg->pwm_period_us; |
| led_dat->pwm_duty_cycles = led_cfg->pwm_duty_cycles; |
| led_dat->wled_cfg = led_cfg->wled_cfg; |
| led_dat->max_current = led_cfg->max_current; |
| |
| if (!((led_dat->id >= PM8XXX_ID_LED_KB_LIGHT) && |
| (led_dat->id < PM8XXX_ID_MAX))) { |
| dev_err(&pdev->dev, "invalid LED ID(%d) specified\n", |
| led_dat->id); |
| rc = -EINVAL; |
| goto fail_id_check; |
| |
| } |
| |
| found = false; |
| version = pm8xxx_get_version(pdev->dev.parent); |
| for (j = 0; j < ARRAY_SIZE(led_map); j++) { |
| if (version == led_map[j].version |
| && (led_map[j].supported & (1 << led_dat->id))) { |
| found = true; |
| break; |
| } |
| } |
| |
| if (!found) { |
| dev_err(&pdev->dev, "invalid LED ID(%d) specified\n", |
| led_dat->id); |
| rc = -EINVAL; |
| goto fail_id_check; |
| } |
| |
| led_dat->cdev.name = curr_led->name; |
| led_dat->cdev.default_trigger = curr_led->default_trigger; |
| led_dat->cdev.brightness_set = pm8xxx_led_set; |
| led_dat->cdev.brightness_get = pm8xxx_led_get; |
| led_dat->cdev.brightness = LED_OFF; |
| led_dat->cdev.flags = curr_led->flags; |
| led_dat->dev = &pdev->dev; |
| |
| rc = get_init_value(led_dat, &led_dat->reg); |
| if (rc < 0) |
| goto fail_id_check; |
| |
| rc = pm8xxx_set_led_mode_and_max_brightness(led_dat, |
| led_cfg->mode, led_cfg->max_current); |
| if (rc < 0) |
| goto fail_id_check; |
| |
| mutex_init(&led_dat->lock); |
| INIT_WORK(&led_dat->work, pm8xxx_led_work); |
| |
| rc = led_classdev_register(&pdev->dev, &led_dat->cdev); |
| if (rc) { |
| dev_err(&pdev->dev, "unable to register led %d,rc=%d\n", |
| led_dat->id, rc); |
| goto fail_id_check; |
| } |
| |
| /* configure default state */ |
| if (led_cfg->default_state) |
| led->cdev.brightness = led_dat->cdev.max_brightness; |
| else |
| led->cdev.brightness = LED_OFF; |
| |
| if (led_cfg->mode != PM8XXX_LED_MODE_MANUAL) { |
| if (led_dat->id == PM8XXX_ID_RGB_LED_RED || |
| led_dat->id == PM8XXX_ID_RGB_LED_GREEN || |
| led_dat->id == PM8XXX_ID_RGB_LED_BLUE) |
| __pm8xxx_led_work(led_dat, 0); |
| else |
| __pm8xxx_led_work(led_dat, |
| led_dat->cdev.max_brightness); |
| |
| if (led_dat->pwm_channel != -1) { |
| led_dat->cdev.max_brightness = LED_FULL; |
| rc = pm8xxx_led_pwm_configure(led_dat); |
| if (rc) { |
| dev_err(&pdev->dev, "failed to " |
| "configure LED, error: %d\n", rc); |
| goto fail_id_check; |
| } |
| schedule_work(&led->work); |
| } |
| } else { |
| __pm8xxx_led_work(led_dat, led->cdev.brightness); |
| } |
| } |
| |
| platform_set_drvdata(pdev, led); |
| |
| return 0; |
| |
| fail_id_check: |
| if (i > 0) { |
| for (i = i - 1; i >= 0; i--) { |
| mutex_destroy(&led[i].lock); |
| led_classdev_unregister(&led[i].cdev); |
| if (led[i].pwm_dev != NULL) |
| pwm_free(led[i].pwm_dev); |
| } |
| } |
| kfree(led); |
| return rc; |
| } |
| |
| static int __devexit pm8xxx_led_remove(struct platform_device *pdev) |
| { |
| int i; |
| const struct led_platform_data *pdata = |
| pdev->dev.platform_data; |
| struct pm8xxx_led_data *led = platform_get_drvdata(pdev); |
| |
| for (i = 0; i < pdata->num_leds; i++) { |
| cancel_work_sync(&led[i].work); |
| mutex_destroy(&led[i].lock); |
| led_classdev_unregister(&led[i].cdev); |
| if (led[i].pwm_dev != NULL) |
| pwm_free(led[i].pwm_dev); |
| } |
| |
| kfree(led); |
| |
| return 0; |
| } |
| |
| static struct platform_driver pm8xxx_led_driver = { |
| .probe = pm8xxx_led_probe, |
| .remove = __devexit_p(pm8xxx_led_remove), |
| .driver = { |
| .name = PM8XXX_LEDS_DEV_NAME, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init pm8xxx_led_init(void) |
| { |
| return platform_driver_register(&pm8xxx_led_driver); |
| } |
| subsys_initcall(pm8xxx_led_init); |
| |
| static void __exit pm8xxx_led_exit(void) |
| { |
| platform_driver_unregister(&pm8xxx_led_driver); |
| } |
| module_exit(pm8xxx_led_exit); |
| |
| MODULE_DESCRIPTION("PM8XXX LEDs driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_VERSION("1.0"); |
| MODULE_ALIAS("platform:pm8xxx-led"); |