sh: bootmem tidying for discontig/sparsemem preparation.
This reworks some of the node 0 bootmem initialization in
preparation for discontigmem and sparsemem support.
ARCH_POPULATES_NODE_MAP is switched to as a result of this.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index ae957a9..4d03098 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -1,37 +1,20 @@
-/* $Id: init.c,v 1.19 2004/02/21 04:42:16 kkojima Exp $
- *
- * linux/arch/sh/mm/init.c
+/*
+ * linux/arch/sh/mm/init.c
*
* Copyright (C) 1999 Niibe Yutaka
- * Copyright (C) 2002, 2004 Paul Mundt
+ * Copyright (C) 2002 - 2007 Paul Mundt
*
* Based on linux/arch/i386/mm/init.c:
* Copyright (C) 1995 Linus Torvalds
*/
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/swap.h>
-#include <linux/smp.h>
#include <linux/init.h>
-#include <linux/highmem.h>
#include <linux/bootmem.h>
-#include <linux/pagemap.h>
#include <linux/proc_fs.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
+#include <linux/percpu.h>
+#include <linux/io.h>
#include <asm/mmu_context.h>
-#include <asm/io.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
#include <asm/cache.h>
@@ -39,37 +22,51 @@
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
pgd_t swapper_pg_dir[PTRS_PER_PGD];
-#ifdef CONFIG_MMU
-/* It'd be good if these lines were in the standard header file. */
-#define START_PFN (NODE_DATA(0)->bdata->node_boot_start >> PAGE_SHIFT)
-#define MAX_LOW_PFN (NODE_DATA(0)->bdata->node_low_pfn)
-#endif
-
void (*copy_page)(void *from, void *to);
void (*clear_page)(void *to);
void show_mem(void)
{
- int i, total = 0, reserved = 0;
- int shared = 0, cached = 0;
+ int total = 0, reserved = 0, free = 0;
+ int shared = 0, cached = 0, slab = 0;
+ pg_data_t *pgdat;
printk("Mem-info:\n");
show_free_areas();
- printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
- i = max_mapnr;
- while (i-- > 0) {
- total++;
- if (PageReserved(mem_map+i))
- reserved++;
- else if (PageSwapCache(mem_map+i))
- cached++;
- else if (page_count(mem_map+i))
- shared += page_count(mem_map+i) - 1;
+
+ for_each_online_pgdat(pgdat) {
+ struct page *page, *end;
+ unsigned long flags;
+
+ pgdat_resize_lock(pgdat, &flags);
+ page = pgdat->node_mem_map;
+ end = page + pgdat->node_spanned_pages;
+
+ do {
+ total++;
+ if (PageReserved(page))
+ reserved++;
+ else if (PageSwapCache(page))
+ cached++;
+ else if (PageSlab(page))
+ slab++;
+ else if (!page_count(page))
+ free++;
+ else
+ shared += page_count(page) - 1;
+ page++;
+ } while (page < end);
+
+ pgdat_resize_unlock(pgdat, &flags);
}
- printk("%d pages of RAM\n",total);
- printk("%d reserved pages\n",reserved);
- printk("%d pages shared\n",shared);
- printk("%d pages swap cached\n",cached);
+
+ printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+ printk("%d pages of RAM\n", total);
+ printk("%d free pages\n", free);
+ printk("%d reserved pages\n", reserved);
+ printk("%d slab pages\n", slab);
+ printk("%d pages shared\n", shared);
+ printk("%d pages swap cached\n", cached);
}
#ifdef CONFIG_MMU
@@ -147,52 +144,38 @@
*/
void __init paging_init(void)
{
- unsigned long zones_size[MAX_NR_ZONES] = { 0, };
+ int nid;
- /*
- * Setup some defaults for the zone sizes.. these should be safe
- * regardless of distcontiguous memory or MMU settings.
- */
- zones_size[ZONE_NORMAL] = __MEMORY_SIZE >> PAGE_SHIFT;
-#ifdef CONFIG_HIGHMEM
- zones_size[ZONE_HIGHMEM] = 0 >> PAGE_SHIFT;
-#endif
-
-#ifdef CONFIG_MMU
- /*
- * If we have an MMU, and want to be using it .. we need to adjust
- * the zone sizes accordingly, in addition to turning it on.
- */
- {
- /* We don't need to map the kernel through the TLB, as
- * it is permanatly mapped using P1. So clear the
- * entire pgd. */
- memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
-
- /* Turn on the MMU */
- enable_mmu();
- zones_size[ZONE_NORMAL] = MAX_LOW_PFN - START_PFN;
- }
+ /* We don't need to map the kernel through the TLB, as
+ * it is permanatly mapped using P1. So clear the
+ * entire pgd. */
+ memset(swapper_pg_dir, 0, sizeof(swapper_pg_dir));
/* Set an initial value for the MMU.TTB so we don't have to
* check for a null value. */
set_TTB(swapper_pg_dir);
-#elif defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
- /*
- * If we don't have CONFIG_MMU set and the processor in question
- * still has an MMU, care needs to be taken to make sure it doesn't
- * stay on.. Since the boot loader could have potentially already
- * turned it on, and we clearly don't want it, we simply turn it off.
- *
- * We don't need to do anything special for the zone sizes, since the
- * default values that were already configured up above should be
- * satisfactory.
- */
- disable_mmu();
-#endif
- NODE_DATA(0)->node_mem_map = NULL;
- free_area_init_node(0, NODE_DATA(0), zones_size, __MEMORY_START >> PAGE_SHIFT, 0);
+ for_each_online_node(nid) {
+ pg_data_t *pgdat = NODE_DATA(nid);
+ unsigned long max_zone_pfns[MAX_NR_ZONES];
+ unsigned long low, start_pfn;
+
+ memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
+
+ start_pfn = pgdat->bdata->node_boot_start >> PAGE_SHIFT;
+ low = pgdat->bdata->node_low_pfn;
+
+ max_zone_pfns[ZONE_NORMAL] = low;
+ add_active_range(nid, start_pfn, low);
+
+ printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n",
+ nid, start_pfn, low);
+
+ free_area_init_nodes(max_zone_pfns);
+
+ printk("Node %u: mem_map starts at %p\n",
+ pgdat->node_id, pgdat->node_mem_map);
+ }
}
static struct kcore_list kcore_mem, kcore_vmalloc;
@@ -200,18 +183,33 @@
void __init mem_init(void)
{
int codesize, reservedpages, datasize, initsize;
- int tmp;
- extern unsigned long memory_start;
+ int nid;
-#ifdef CONFIG_MMU
- high_memory = (void *)__va(MAX_LOW_PFN * PAGE_SIZE);
-#else
- extern unsigned long memory_end;
+ reservedpages = 0;
- high_memory = (void *)(memory_end & PAGE_MASK);
-#endif
+ for_each_online_node(nid) {
+ pg_data_t *pgdat = NODE_DATA(nid);
+ unsigned long node_pages = 0;
+ void *node_high_memory;
+ int i;
- max_mapnr = num_physpages = MAP_NR(high_memory) - MAP_NR(memory_start);
+ num_physpages += pgdat->node_present_pages;
+
+ if (pgdat->node_spanned_pages)
+ node_pages = free_all_bootmem_node(pgdat);
+
+ totalram_pages += node_pages;
+
+ for (i = 0; i < node_pages; i++)
+ if (PageReserved(pgdat->node_mem_map + i))
+ reservedpages++;
+
+ node_high_memory = (void *)((pgdat->node_start_pfn +
+ pgdat->node_spanned_pages) <<
+ PAGE_SHIFT);
+ if (node_high_memory > high_memory)
+ high_memory = node_high_memory;
+ }
/* clear the zero-page */
memset(empty_zero_page, 0, PAGE_SIZE);
@@ -229,16 +227,6 @@
clear_page = clear_page_nommu;
#endif
- /* this will put all low memory onto the freelists */
- totalram_pages += free_all_bootmem_node(NODE_DATA(0));
- reservedpages = 0;
- for (tmp = 0; tmp < num_physpages; tmp++)
- /*
- * Only count reserved RAM pages
- */
- if (PageReserved(mem_map+tmp))
- reservedpages++;
-
codesize = (unsigned long) &_etext - (unsigned long) &_text;
datasize = (unsigned long) &_edata - (unsigned long) &_etext;
initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
@@ -250,7 +238,7 @@
printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, "
"%dk reserved, %dk data, %dk init)\n",
(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
- max_mapnr << (PAGE_SHIFT-10),
+ totalram_pages << (PAGE_SHIFT-10),
codesize >> 10,
reservedpages << (PAGE_SHIFT-10),
datasize >> 10,
@@ -289,4 +277,3 @@
printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
}
#endif
-