Merge with master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
diff --git a/CREDITS b/CREDITS
index 9bd099d..d65ffe5 100644
--- a/CREDITS
+++ b/CREDITS
@@ -2475,13 +2475,9 @@
S: USA
N: Dave Neuer
-E: dneuer@innovation-charter.com
-E: mr_fred_smoothie@yahoo.com
+E: dave.neuer@pobox.com
D: Helped implement support for Compaq's H31xx series iPAQs
D: Other mostly minor tweaks & bugfixes
-S: 325 E. Main St., Suite 3
-S: Carnegie, PA 15105
-S: USA
N: Michael Neuffer
E: mike@i-Connect.Net
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index cf2fce7..6df1dfd 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -14,7 +14,7 @@
</authorgroup>
<copyright>
- <year>2003</year>
+ <year>2003-2005</year>
<holder>Jeff Garzik</holder>
</copyright>
@@ -44,30 +44,38 @@
<toc></toc>
- <chapter id="libataThanks">
- <title>Thanks</title>
+ <chapter id="libataIntroduction">
+ <title>Introduction</title>
<para>
- The bulk of the ATA knowledge comes thanks to long conversations with
- Andre Hedrick (www.linux-ide.org).
+ libATA is a library used inside the Linux kernel to support ATA host
+ controllers and devices. libATA provides an ATA driver API, class
+ transports for ATA and ATAPI devices, and SCSI<->ATA translation
+ for ATA devices according to the T10 SAT specification.
</para>
<para>
- Thanks to Alan Cox for pointing out similarities
- between SATA and SCSI, and in general for motivation to hack on
- libata.
- </para>
- <para>
- libata's device detection
- method, ata_pio_devchk, and in general all the early probing was
- based on extensive study of Hale Landis's probe/reset code in his
- ATADRVR driver (www.ata-atapi.com).
+ This Guide documents the libATA driver API, library functions, library
+ internals, and a couple sample ATA low-level drivers.
</para>
</chapter>
<chapter id="libataDriverApi">
<title>libata Driver API</title>
+ <para>
+ struct ata_port_operations is defined for every low-level libata
+ hardware driver, and it controls how the low-level driver
+ interfaces with the ATA and SCSI layers.
+ </para>
+ <para>
+ FIS-based drivers will hook into the system with ->qc_prep() and
+ ->qc_issue() high-level hooks. Hardware which behaves in a manner
+ similar to PCI IDE hardware may utilize several generic helpers,
+ defining at a bare minimum the bus I/O addresses of the ATA shadow
+ register blocks.
+ </para>
<sect1>
<title>struct ata_port_operations</title>
+ <sect2><title>Disable ATA port</title>
<programlisting>
void (*port_disable) (struct ata_port *);
</programlisting>
@@ -78,6 +86,9 @@
unplug).
</para>
+ </sect2>
+
+ <sect2><title>Post-IDENTIFY device configuration</title>
<programlisting>
void (*dev_config) (struct ata_port *, struct ata_device *);
</programlisting>
@@ -88,6 +99,9 @@
issue of SET FEATURES - XFER MODE, and prior to operation.
</para>
+ </sect2>
+
+ <sect2><title>Set PIO/DMA mode</title>
<programlisting>
void (*set_piomode) (struct ata_port *, struct ata_device *);
void (*set_dmamode) (struct ata_port *, struct ata_device *);
@@ -108,6 +122,9 @@
->set_dma_mode() is only called if DMA is possible.
</para>
+ </sect2>
+
+ <sect2><title>Taskfile read/write</title>
<programlisting>
void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
@@ -120,6 +137,9 @@
taskfile register values.
</para>
+ </sect2>
+
+ <sect2><title>ATA command execute</title>
<programlisting>
void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>
@@ -129,17 +149,37 @@
->tf_load(), to be initiated in hardware.
</para>
+ </sect2>
+
+ <sect2><title>Per-cmd ATAPI DMA capabilities filter</title>
<programlisting>
-u8 (*check_status)(struct ata_port *ap);
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+int (*check_atapi_dma) (struct ata_queued_cmd *qc);
</programlisting>
<para>
- Reads the Status ATA shadow register from hardware. On some
- hardware, this has the side effect of clearing the interrupt
- condition.
+Allow low-level driver to filter ATA PACKET commands, returning a status
+indicating whether or not it is OK to use DMA for the supplied PACKET
+command.
</para>
+ </sect2>
+
+ <sect2><title>Read specific ATA shadow registers</title>
+ <programlisting>
+u8 (*check_status)(struct ata_port *ap);
+u8 (*check_altstatus)(struct ata_port *ap);
+u8 (*check_err)(struct ata_port *ap);
+ </programlisting>
+
+ <para>
+ Reads the Status/AltStatus/Error ATA shadow register from
+ hardware. On some hardware, reading the Status register has
+ the side effect of clearing the interrupt condition.
+ </para>
+
+ </sect2>
+
+ <sect2><title>Select ATA device on bus</title>
<programlisting>
void (*dev_select)(struct ata_port *ap, unsigned int device);
</programlisting>
@@ -147,9 +187,13 @@
<para>
Issues the low-level hardware command(s) that causes one of N
hardware devices to be considered 'selected' (active and
- available for use) on the ATA bus.
+ available for use) on the ATA bus. This generally has no
+meaning on FIS-based devices.
</para>
+ </sect2>
+
+ <sect2><title>Reset ATA bus</title>
<programlisting>
void (*phy_reset) (struct ata_port *ap);
</programlisting>
@@ -162,17 +206,31 @@
functions ata_bus_reset() or sata_phy_reset() for this hook.
</para>
+ </sect2>
+
+ <sect2><title>Control PCI IDE BMDMA engine</title>
<programlisting>
void (*bmdma_setup) (struct ata_queued_cmd *qc);
void (*bmdma_start) (struct ata_queued_cmd *qc);
+void (*bmdma_stop) (struct ata_port *ap);
+u8 (*bmdma_status) (struct ata_port *ap);
</programlisting>
<para>
- When setting up an IDE BMDMA transaction, these hooks arm
- (->bmdma_setup) and fire (->bmdma_start) the hardware's DMA
- engine.
+When setting up an IDE BMDMA transaction, these hooks arm
+(->bmdma_setup), fire (->bmdma_start), and halt (->bmdma_stop)
+the hardware's DMA engine. ->bmdma_status is used to read the standard
+PCI IDE DMA Status register.
</para>
+ <para>
+These hooks are typically either no-ops, or simply not implemented, in
+FIS-based drivers.
+ </para>
+
+ </sect2>
+
+ <sect2><title>High-level taskfile hooks</title>
<programlisting>
void (*qc_prep) (struct ata_queued_cmd *qc);
int (*qc_issue) (struct ata_queued_cmd *qc);
@@ -190,20 +248,26 @@
->qc_issue is used to make a command active, once the hardware
and S/G tables have been prepared. IDE BMDMA drivers use the
helper function ata_qc_issue_prot() for taskfile protocol-based
- dispatch. More advanced drivers roll their own ->qc_issue
- implementation, using this as the "issue new ATA command to
- hardware" hook.
+ dispatch. More advanced drivers implement their own ->qc_issue.
</para>
+ </sect2>
+
+ <sect2><title>Timeout (error) handling</title>
<programlisting>
void (*eng_timeout) (struct ata_port *ap);
</programlisting>
<para>
- This is a high level error handling function, called from the
- error handling thread, when a command times out.
+This is a high level error handling function, called from the
+error handling thread, when a command times out. Most newer
+hardware will implement its own error handling code here. IDE BMDMA
+drivers may use the helper function ata_eng_timeout().
</para>
+ </sect2>
+
+ <sect2><title>Hardware interrupt handling</title>
<programlisting>
irqreturn_t (*irq_handler)(int, void *, struct pt_regs *);
void (*irq_clear) (struct ata_port *);
@@ -216,6 +280,9 @@
is quiet.
</para>
+ </sect2>
+
+ <sect2><title>SATA phy read/write</title>
<programlisting>
u32 (*scr_read) (struct ata_port *ap, unsigned int sc_reg);
void (*scr_write) (struct ata_port *ap, unsigned int sc_reg,
@@ -227,6 +294,9 @@
if ->phy_reset hook called the sata_phy_reset() helper function.
</para>
+ </sect2>
+
+ <sect2><title>Init and shutdown</title>
<programlisting>
int (*port_start) (struct ata_port *ap);
void (*port_stop) (struct ata_port *ap);
@@ -240,15 +310,17 @@
tasks.
</para>
<para>
- ->host_stop() is called when the rmmod or hot unplug process
- begins. The hook must stop all hardware interrupts, DMA
- engines, etc.
- </para>
- <para>
->port_stop() is called after ->host_stop(). It's sole function
is to release DMA/memory resources, now that they are no longer
actively being used.
</para>
+ <para>
+ ->host_stop() is called after all ->port_stop() calls
+have completed. The hook must finalize hardware shutdown, release DMA
+and other resources, etc.
+ </para>
+
+ </sect2>
</sect1>
</chapter>
@@ -279,4 +351,24 @@
!Idrivers/scsi/sata_sil.c
</chapter>
+ <chapter id="libataThanks">
+ <title>Thanks</title>
+ <para>
+ The bulk of the ATA knowledge comes thanks to long conversations with
+ Andre Hedrick (www.linux-ide.org), and long hours pondering the ATA
+ and SCSI specifications.
+ </para>
+ <para>
+ Thanks to Alan Cox for pointing out similarities
+ between SATA and SCSI, and in general for motivation to hack on
+ libata.
+ </para>
+ <para>
+ libata's device detection
+ method, ata_pio_devchk, and in general all the early probing was
+ based on extensive study of Hale Landis's probe/reset code in his
+ ATADRVR driver (www.ata-atapi.com).
+ </para>
+ </chapter>
+
</book>
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 9838d32..4d35562 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -271,7 +271,7 @@
pass it on as a open-source patch. The rules are pretty simple: if you
can certify the below:
- Developer's Certificate of Origin 1.0
+ Developer's Certificate of Origin 1.1
By making a contribution to this project, I certify that:
@@ -291,6 +291,12 @@
person who certified (a), (b) or (c) and I have not modified
it.
+ (d) I understand and agree that this project and the contribution
+ are public and that a record of the contribution (including all
+ personal information I submit with it, including my sign-off) is
+ maintained indefinitely and may be redistributed consistent with
+ this project or the open source license(s) involved.
+
then you just add a line saying
Signed-off-by: Random J Developer <random@developer.org>
diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt
index fa12a9e..80e1cb1 100644
--- a/Documentation/networking/vortex.txt
+++ b/Documentation/networking/vortex.txt
@@ -12,7 +12,7 @@
Please report problems to one or more of:
Andrew Morton <andrewm@uow.edu.au>
- Netdev mailing list <netdev@oss.sgi.com>
+ Netdev mailing list <netdev@vger.kernel.org>
Linux kernel mailing list <linux-kernel@vger.kernel.org>
Please note the 'Reporting and Diagnosing Problems' section at the end
diff --git a/MAINTAINERS b/MAINTAINERS
index 65ad825..86ba94f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -73,7 +73,7 @@
3C359 NETWORK DRIVER
P: Mike Phillips
M: mikep@linuxtr.net
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
L: linux-tr@linuxtr.net
W: http://www.linuxtr.net
S: Maintained
@@ -81,13 +81,13 @@
3C505 NETWORK DRIVER
P: Philip Blundell
M: philb@gnu.org
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
3CR990 NETWORK DRIVER
P: David Dillow
M: dave@thedillows.org
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
3W-XXXX ATA-RAID CONTROLLER DRIVER
@@ -130,7 +130,7 @@
8169 10/100/1000 GIGABIT ETHERNET DRIVER
P: Francois Romieu
M: romieu@fr.zoreil.com
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
@@ -143,7 +143,7 @@
8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
P: Paul Gortmaker
M: p_gortmaker@yahoo.com
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
A2232 SERIAL BOARD DRIVER
@@ -332,7 +332,7 @@
ARPD SUPPORT
P: Jonathan Layes
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
ASUS ACPI EXTRAS DRIVER
@@ -706,7 +706,7 @@
DIGI RIGHTSWITCH NETWORK DRIVER
P: Rick Richardson
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
W: http://www.digi.com
S: Orphaned
@@ -812,7 +812,7 @@
ETHEREXPRESS-16 NETWORK DRIVER
P: Philip Blundell
M: philb@gnu.org
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
ETHERNET BRIDGE
@@ -875,7 +875,7 @@
FRAME RELAY DLCI/FRAD (Sangoma drivers too)
P: Mike McLagan
M: mike.mclagan@linux.org
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
FREEVXFS FILESYSTEM
@@ -1215,7 +1215,7 @@
IPX NETWORK LAYER
P: Arnaldo Carvalho de Melo
M: acme@conectiva.com.br
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
IRDA SUBSYSTEM
@@ -1482,7 +1482,7 @@
P: Manish Lachwani
M: Manish_Lachwani@pmc-sierra.com
L: linux-mips@linux-mips.org
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Supported
MATROX FRAMEBUFFER DRIVER
@@ -1592,13 +1592,13 @@
M: akpm@osdl.org
P: Jeff Garzik
M: jgarzik@pobox.com
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
NETWORKING [GENERAL]
P: Networking Team
-M: netdev@oss.sgi.com
-L: netdev@oss.sgi.com
+M: netdev@vger.kernel.org
+L: netdev@vger.kernel.org
S: Maintained
NETWORKING [IPv4/IPv6]
@@ -1614,7 +1614,7 @@
M: yoshfuji@linux-ipv6.org
P: Patrick McHardy
M: kaber@coreworks.de
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
IPVS
@@ -1634,7 +1634,7 @@
P: Jan-Pascal van Best and Andreas Mohr
M: Jan-Pascal van Best <jvbest@qv3pluto.leidenuniv.nl>
M: Andreas Mohr <100.30936@germany.net>
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER
@@ -1676,7 +1676,7 @@
M: p2@ace.ulyssis.student.kuleuven.ac.be
P: Mike Phillips
M: mikep@linuxtr.net
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
L: linux-tr@linuxtr.net
W: http://www.linuxtr.net
S: Maintained
@@ -1783,7 +1783,7 @@
PCNET32 NETWORK DRIVER
P: Thomas Bogendörfer
M: tsbogend@alpha.franken.de
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
PHRAM MTD DRIVER
@@ -1795,7 +1795,7 @@
POSIX CLOCKS and TIMERS
P: George Anzinger
M: george@mvista.com
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Supported
PNP SUPPORT
@@ -1830,7 +1830,7 @@
PRISM54 WIRELESS DRIVER
P: Prism54 Development Team
M: prism54-private@prism54.org
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
W: http://prism54.org
S: Maintained
@@ -2047,7 +2047,7 @@
P: Daniele Venzano
M: venza@brownhat.org
W: http://www.brownhat.org/sis900.html
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
SIS FRAMEBUFFER DRIVER
@@ -2106,7 +2106,7 @@
SONIC NETWORK DRIVER
P: Thomas Bogendoerfer
M: tsbogend@alpha.franken.de
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
SONY VAIO CONTROL DEVICE DRIVER
@@ -2163,7 +2163,7 @@
SPX NETWORK LAYER
P: Jay Schulist
M: jschlst@samba.org
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Supported
SRM (Alpha) environment access
@@ -2242,7 +2242,7 @@
TOKEN-RING NETWORK DRIVER
P: Mike Phillips
M: mikep@linuxtr.net
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
L: linux-tr@linuxtr.net
W: http://www.linuxtr.net
S: Maintained
diff --git a/Makefile b/Makefile
index c11a317..0d1e74d 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 12
-EXTRAVERSION =-rc5
+EXTRAVERSION =
NAME=Woozy Numbat
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bf397a9..475950c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -497,7 +497,7 @@
config CPU_FREQ_SA1100
bool
- depends on CPU_FREQ && (SA1100_LART || SA1100_PLEB)
+ depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
default y
config CPU_FREQ_SA1110
@@ -689,7 +689,9 @@
source "drivers/acorn/block/Kconfig"
-if ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
+if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
+ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
+ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
source "drivers/ide/Kconfig"
endif
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index 665bd2c..d3fe253 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -47,3 +47,10 @@
orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
#endif
+#ifdef CONFIG_ARCH_IXP2000
+ mov r1, #-1
+ mov r0, #0xd6000000
+ str r1, [r0, #0x14]
+ str r1, [r0, #0x18]
+#endif
+
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index 2b4059d..5d92af9 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sat Mar 26 21:32:26 2005
+# Linux kernel version: 2.6.12-rc6-git3
+# Thu Jun 9 19:00:50 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -16,6 +16,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -34,6 +35,8 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -109,7 +112,6 @@
CONFIG_CPU_CACHE_V4WB=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
#
# Processor Features
@@ -122,6 +124,7 @@
# Bus support
#
CONFIG_ISA=y
+CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -131,6 +134,7 @@
#
# Kernel Features
#
+# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_DISCONTIGMEM=y
# CONFIG_LEDS is not set
@@ -152,12 +156,14 @@
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_SA1100=y
#
# Floating point emulation
@@ -294,7 +300,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
@@ -428,7 +433,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -526,6 +530,7 @@
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
CONFIG_SA1100_FIR=y
+# CONFIG_VIA_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
# CONFIG_BT_SCO is not set
@@ -618,7 +623,6 @@
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -687,7 +691,6 @@
#
# TPM devices
#
-# CONFIG_TCG_TPM is not set
#
# I2C support
@@ -736,6 +739,7 @@
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
@@ -747,6 +751,7 @@
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
@@ -871,7 +876,6 @@
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
@@ -954,9 +958,11 @@
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -985,6 +991,7 @@
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index b4e297d..b9de07d 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:02:26 2005
+# Linux kernel version: 2.6.12-rc4
+# Thu Jun 9 01:59:03 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -16,6 +16,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -33,6 +34,8 @@
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -120,6 +123,7 @@
# Bus support
#
CONFIG_ISA=y
+CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -138,6 +142,7 @@
#
# Kernel Features
#
+# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_DISCONTIGMEM=y
# CONFIG_LEDS is not set
@@ -159,12 +164,13 @@
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_SA1100=y
#
# Floating point emulation
@@ -298,7 +304,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
@@ -379,7 +384,6 @@
# Networking options
#
# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -476,6 +480,7 @@
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
CONFIG_SA1100_FIR=m
+# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
@@ -647,7 +652,6 @@
#
# TPM devices
#
-# CONFIG_TCG_TPM is not set
#
# I2C support
@@ -676,9 +680,11 @@
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_SA1100=y
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
index 6987c8c..fb41a36 100644
--- a/arch/arm/configs/hackkit_defconfig
+++ b/arch/arm/configs/hackkit_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:22:34 2005
+# Linux kernel version: 2.6.12-rc6-git3
+# Thu Jun 9 20:58:58 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -16,6 +16,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -34,6 +35,8 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -109,7 +112,6 @@
CONFIG_CPU_CACHE_V4WB=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
#
# Processor Features
@@ -119,6 +121,7 @@
# Bus support
#
CONFIG_ISA=y
+CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -128,6 +131,7 @@
#
# Kernel Features
#
+# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_DISCONTIGMEM=y
CONFIG_LEDS=y
@@ -151,12 +155,14 @@
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_SA1100=y
#
# Floating point emulation
@@ -280,7 +286,6 @@
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
@@ -338,7 +343,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -484,7 +488,6 @@
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -533,7 +536,6 @@
#
# TPM devices
#
-# CONFIG_TCG_TPM is not set
#
# I2C support
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 4eb3615..e14278d 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -269,7 +269,7 @@
add r5, sp, #S_PC
ldmia r7, {r2 - r4} @ Get USR pc, cpsr
-#if __LINUX_ARM_ARCH__ < 6
+#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
@ make sure our user space atomic helper is aborted
cmp r2, #VIRT_OFFSET
bichs r3, r3, #PSR_Z_BIT
@@ -616,11 +616,17 @@
__kuser_cmpxchg: @ 0xffff0fc0
-#if __LINUX_ARM_ARCH__ < 6
+#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
-#ifdef CONFIG_SMP /* sanity check */
-#error "CONFIG_SMP on a machine supporting pre-ARMv6 processors?"
-#endif
+ /*
+ * Poor you. No fast solution possible...
+ * The kernel itself must perform the operation.
+ * A special ghost syscall is used for that (see traps.c).
+ */
+ swi #0x9ffff0
+ mov pc, lr
+
+#elif __LINUX_ARM_ARCH__ < 6
/*
* Theory of operation:
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 14df16b..45d2a03 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -464,6 +464,55 @@
#endif
return 0;
+#ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG
+ /*
+ * Atomically store r1 in *r2 if *r2 is equal to r0 for user space.
+ * Return zero in r0 if *MEM was changed or non-zero if no exchange
+ * happened. Also set the user C flag accordingly.
+ * If access permissions have to be fixed up then non-zero is
+ * returned and the operation has to be re-attempted.
+ *
+ * *NOTE*: This is a ghost syscall private to the kernel. Only the
+ * __kuser_cmpxchg code in entry-armv.S should be aware of its
+ * existence. Don't ever use this from user code.
+ */
+ case 0xfff0:
+ {
+ extern void do_DataAbort(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs);
+ unsigned long val;
+ unsigned long addr = regs->ARM_r2;
+ struct mm_struct *mm = current->mm;
+ pgd_t *pgd; pmd_t *pmd; pte_t *pte;
+
+ regs->ARM_cpsr &= ~PSR_C_BIT;
+ spin_lock(&mm->page_table_lock);
+ pgd = pgd_offset(mm, addr);
+ if (!pgd_present(*pgd))
+ goto bad_access;
+ pmd = pmd_offset(pgd, addr);
+ if (!pmd_present(*pmd))
+ goto bad_access;
+ pte = pte_offset_map(pmd, addr);
+ if (!pte_present(*pte) || !pte_write(*pte))
+ goto bad_access;
+ val = *(unsigned long *)addr;
+ val -= regs->ARM_r0;
+ if (val == 0) {
+ *(unsigned long *)addr = regs->ARM_r1;
+ regs->ARM_cpsr |= PSR_C_BIT;
+ }
+ spin_unlock(&mm->page_table_lock);
+ return val;
+
+ bad_access:
+ spin_unlock(&mm->page_table_lock);
+ /* simulate a read access fault */
+ do_DataAbort(addr, 15 + (1 << 11), regs);
+ return -1;
+ }
+#endif
+
default:
/* Calls 9f00xx..9f07ff are defined to return -ENOSYS
if not implemented, rather than raising SIGILL. This
diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S
index 6d1d7c2..5e240e4 100644
--- a/arch/arm/lib/io-writesw-armv4.S
+++ b/arch/arm/lib/io-writesw-armv4.S
@@ -87,9 +87,9 @@
subs r2, r2, #2
orr ip, ip, r3, push_hbyte1
strh ip, [r0]
- bpl 2b
+ bpl 1b
-3: tst r2, #1
-2: movne ip, r3, lsr #8
+ tst r2, #1
+3: movne ip, r3, lsr #8
strneh ip, [r0]
mov pc, lr
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 3b948e8..e0a01ee 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -83,7 +83,6 @@
{ IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE },
{ IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE },
{ IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE },
- { 0xfc900000, 0xc9000000, SZ_4K, MT_DEVICE },
{ 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE },
{ 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE },
};
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index dd012d6..f2c9e0d 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/sysdev.h>
#include <linux/major.h>
#include <linux/fb.h>
#include <linux/interrupt.h>
@@ -106,6 +107,35 @@
set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
}
+#ifdef CONFIG_PM
+
+static int lubbock_irq_resume(struct sys_device *dev)
+{
+ LUB_IRQ_MASK_EN = lubbock_irq_enabled;
+ return 0;
+}
+
+static struct sysdev_class lubbock_irq_sysclass = {
+ set_kset_name("cpld_irq"),
+ .resume = lubbock_irq_resume,
+};
+
+static struct sys_device lubbock_irq_device = {
+ .cls = &lubbock_irq_sysclass,
+};
+
+static int __init lubbock_irq_device_init(void)
+{
+ int ret = sysdev_class_register(&lubbock_irq_sysclass);
+ if (ret == 0)
+ ret = sysdev_register(&lubbock_irq_device);
+ return ret;
+}
+
+device_initcall(lubbock_irq_device_init);
+
+#endif
+
static int lubbock_udc_is_connected(void)
{
return (LUB_MISC_RD & (1 << 9)) == 0;
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 3f95223..9896afc 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/bitops.h>
@@ -62,7 +63,6 @@
.unmask = mainstone_unmask_irq,
};
-
static void mainstone_irq_handler(unsigned int irq, struct irqdesc *desc,
struct pt_regs *regs)
{
@@ -100,6 +100,35 @@
set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
}
+#ifdef CONFIG_PM
+
+static int mainstone_irq_resume(struct sys_device *dev)
+{
+ MST_INTMSKENA = mainstone_irq_enabled;
+ return 0;
+}
+
+static struct sysdev_class mainstone_irq_sysclass = {
+ set_kset_name("cpld_irq"),
+ .resume = mainstone_irq_resume,
+};
+
+static struct sys_device mainstone_irq_device = {
+ .cls = &mainstone_irq_sysclass,
+};
+
+static int __init mainstone_irq_device_init(void)
+{
+ int ret = sysdev_class_register(&mainstone_irq_sysclass);
+ if (ret == 0)
+ ret = sysdev_register(&mainstone_irq_device);
+ return ret;
+}
+
+device_initcall(mainstone_irq_device_init);
+
+#endif
+
static struct resource smc91x_resources[] = {
[0] = {
@@ -304,6 +333,15 @@
PWER = 0xC0000002;
PRER = 0x00000002;
PFER = 0x00000002;
+ /* for use I SRAM as framebuffer. */
+ PSLR |= 0xF04;
+ PCFR = 0x66;
+ /* For Keypad wakeup. */
+ KPC &=~KPC_ASACT;
+ KPC |=KPC_AS;
+ PKWR = 0x000FD000;
+ /* Need read PKWR back after set it. */
+ PKWR;
}
MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 82a4bf3..9799fe8 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -29,9 +29,6 @@
*/
#undef DEBUG
-extern void pxa_cpu_suspend(void);
-extern void pxa_cpu_resume(void);
-
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
@@ -63,6 +60,12 @@
SLEEP_SAVE_ICMR,
SLEEP_SAVE_CKEN,
+#ifdef CONFIG_PXA27x
+ SLEEP_SAVE_MDREFR,
+ SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
+ SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
+#endif
+
SLEEP_SAVE_CKSUM,
SLEEP_SAVE_SIZE
@@ -75,9 +78,7 @@
unsigned long checksum = 0;
struct timespec delta, rtc;
int i;
-
- if (state != PM_SUSPEND_MEM)
- return -EINVAL;
+ extern void pxa_cpu_pm_enter(suspend_state_t state);
#ifdef CONFIG_IWMMXT
/* force any iWMMXt context to ram **/
@@ -100,16 +101,17 @@
SAVE(GAFR2_L); SAVE(GAFR2_U);
#ifdef CONFIG_PXA27x
+ SAVE(MDREFR);
SAVE(GPLR3); SAVE(GPDR3); SAVE(GRER3); SAVE(GFER3); SAVE(PGSR3);
SAVE(GAFR3_L); SAVE(GAFR3_U);
+ SAVE(PWER); SAVE(PCFR); SAVE(PRER);
+ SAVE(PFER); SAVE(PKWR);
#endif
SAVE(ICMR);
ICMR = 0;
SAVE(CKEN);
- CKEN = 0;
-
SAVE(PSTR);
/* Note: wake up source are set up in each machine specific files */
@@ -123,16 +125,13 @@
/* Clear sleep reset status */
RCSR = RCSR_SMR;
- /* set resume return address */
- PSPR = virt_to_phys(pxa_cpu_resume);
-
/* before sleeping, calculate and save a checksum */
for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
checksum += sleep_save[i];
sleep_save[SLEEP_SAVE_CKSUM] = checksum;
/* *** go zzz *** */
- pxa_cpu_suspend();
+ pxa_cpu_pm_enter(state);
/* after sleeping, validate the checksum */
checksum = 0;
@@ -145,7 +144,7 @@
LUB_HEXLED = 0xbadbadc5;
#endif
while (1)
- pxa_cpu_suspend();
+ pxa_cpu_pm_enter(state);
}
/* ensure not to come back here if it wasn't intended */
@@ -162,8 +161,11 @@
RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
#ifdef CONFIG_PXA27x
+ RESTORE(MDREFR);
RESTORE(GAFR3_L); RESTORE(GAFR3_U); RESTORE_GPLEVEL(3);
RESTORE(GPDR3); RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3);
+ RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
+ RESTORE(PFER); RESTORE(PKWR);
#endif
PSSR = PSSR_RDH | PSSR_PH;
@@ -197,7 +199,9 @@
*/
static int pxa_pm_prepare(suspend_state_t state)
{
- return 0;
+ extern int pxa_cpu_pm_prepare(suspend_state_t state);
+
+ return pxa_cpu_pm_prepare(state);
}
/*
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index e887b71..7869c3b 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -16,6 +16,7 @@
* initialization stuff for PXA machines which can be overridden later if
* need be.
*/
+#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -102,3 +103,35 @@
}
EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
+
+#ifdef CONFIG_PM
+
+int pxa_cpu_pm_prepare(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void pxa_cpu_pm_enter(suspend_state_t state)
+{
+ extern void pxa_cpu_suspend(unsigned int);
+ extern void pxa_cpu_resume(void);
+
+ CKEN = 0;
+
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ /* set resume return address */
+ PSPR = virt_to_phys(pxa_cpu_resume);
+ pxa_cpu_suspend(3);
+ break;
+ }
+}
+
+#endif
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 7e863af..893964f 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -120,6 +120,42 @@
EXPORT_SYMBOL(get_memclk_frequency_10khz);
EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
+#ifdef CONFIG_PM
+
+int pxa_cpu_pm_prepare(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+void pxa_cpu_pm_enter(suspend_state_t state)
+{
+ extern void pxa_cpu_standby(void);
+ extern void pxa_cpu_suspend(unsigned int);
+ extern void pxa_cpu_resume(void);
+
+ CKEN = CKEN22_MEMC | CKEN9_OSTIMER;
+
+ /* ensure voltage-change sequencer not initiated, which hangs */
+ PCFR &= ~PCFR_FVC;
+
+ /* Clear edge-detect status register. */
+ PEDR = 0xDF12FE1B;
+
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ /* set resume return address */
+ PSPR = virt_to_phys(pxa_cpu_resume);
+ pxa_cpu_suspend(3);
+ break;
+ }
+}
+
+#endif
/*
* device registration specific to PXA27x.
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index bc229fa..c7c2889 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -785,6 +785,10 @@
chan->client = NULL;
chan->in_use = 0;
+ if (chan->irq_claimed)
+ free_irq(chan->irq, (void *)chan);
+ chan->irq_claimed = 0;
+
local_irq_restore(flags);
return 0;
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 50cde57..6923316 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -150,7 +150,7 @@
config H3600_SLEEVE
tristate "Compaq iPAQ Handheld sleeve support"
- depends on SA1100_H3600
+ depends on SA1100_H3100 || SA1100_H3600
help
Choose this option to enable support for extension packs (sleeves)
for the Compaq iPAQ H3XXX series of handheld computers. This option
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 554e1bd..302c2a7 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -543,7 +543,7 @@
val |= SYS_CLCD_MODE_5551;
break;
case 6:
- val |= SYS_CLCD_MODE_565_BLSB;
+ val |= SYS_CLCD_MODE_565_RLSB;
break;
case 8:
val |= SYS_CLCD_MODE_888;
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 48bac7d..3fefb43 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -228,7 +228,6 @@
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
select CPU_TLB_V4WB
- select CPU_MINICACHE
# XScale
config CPU_XSCALE
@@ -239,7 +238,6 @@
select CPU_ABRT_EV5T
select CPU_CACHE_VIVT
select CPU_TLB_V4WBI
- select CPU_MINICACHE
# ARMv6
config CPU_V6
@@ -345,11 +343,6 @@
config CPU_TLB_V6
bool
-config CPU_MINICACHE
- bool
- help
- Processor has a minicache.
-
comment "Processor Features"
config ARM_THUMB
@@ -429,3 +422,11 @@
assume directly accessing that register and always obtain the
expected value only on ARMv7 and above.
+config NEEDS_SYSCALL_FOR_CMPXCHG
+ bool
+ default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3)
+ help
+ SMP on a pre-ARMv6 processor? Well OK then.
+ Forget about fast user space cmpxchg support.
+ It is just not possible.
+
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index ccf316c..59f47d4 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -31,8 +31,6 @@
obj-$(CONFIG_CPU_SA1100) += copypage-v4mc.o
obj-$(CONFIG_CPU_XSCALE) += copypage-xscale.o
-obj-$(CONFIG_CPU_MINICACHE) += minicache.o
-
obj-$(CONFIG_CPU_TLB_V3) += tlb-v3.o
obj-$(CONFIG_CPU_TLB_V4WT) += tlb-v4.o
obj-$(CONFIG_CPU_TLB_V4WB) += tlb-v4wb.o
diff --git a/arch/arm/mm/copypage-xscale.S b/arch/arm/mm/copypage-xscale.S
deleted file mode 100644
index bb27731..0000000
--- a/arch/arm/mm/copypage-xscale.S
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/arch/arm/lib/copypage-xscale.S
- *
- * Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/constants.h>
-
-/*
- * General note:
- * We don't really want write-allocate cache behaviour for these functions
- * since that will just eat through 8K of the cache.
- */
-
- .text
- .align 5
-/*
- * XScale optimised copy_user_page
- * r0 = destination
- * r1 = source
- * r2 = virtual user address of ultimate destination page
- *
- * The source page may have some clean entries in the cache already, but we
- * can safely ignore them - break_cow() will flush them out of the cache
- * if we eventually end up using our copied page.
- *
- * What we could do is use the mini-cache to buffer reads from the source
- * page. We rely on the mini-cache being smaller than one page, so we'll
- * cycle through the complete cache anyway.
- */
-ENTRY(xscale_mc_copy_user_page)
- stmfd sp!, {r4, r5, lr}
- mov r5, r0
- mov r0, r1
- bl map_page_minicache
- mov r1, r5
- mov lr, #PAGE_SZ/64-1
-
- /*
- * Strangely enough, best performance is achieved
- * when prefetching destination as well. (NP)
- */
- pld [r0, #0]
- pld [r0, #32]
- pld [r1, #0]
- pld [r1, #32]
-
-1: pld [r0, #64]
- pld [r0, #96]
- pld [r1, #64]
- pld [r1, #96]
-
-2: ldrd r2, [r0], #8
- ldrd r4, [r0], #8
- mov ip, r1
- strd r2, [r1], #8
- ldrd r2, [r0], #8
- strd r4, [r1], #8
- ldrd r4, [r0], #8
- strd r2, [r1], #8
- strd r4, [r1], #8
- mcr p15, 0, ip, c7, c10, 1 @ clean D line
- ldrd r2, [r0], #8
- mcr p15, 0, ip, c7, c6, 1 @ invalidate D line
- ldrd r4, [r0], #8
- mov ip, r1
- strd r2, [r1], #8
- ldrd r2, [r0], #8
- strd r4, [r1], #8
- ldrd r4, [r0], #8
- strd r2, [r1], #8
- strd r4, [r1], #8
- mcr p15, 0, ip, c7, c10, 1 @ clean D line
- subs lr, lr, #1
- mcr p15, 0, ip, c7, c6, 1 @ invalidate D line
- bgt 1b
- beq 2b
-
- ldmfd sp!, {r4, r5, pc}
-
- .align 5
-/*
- * XScale optimised clear_user_page
- * r0 = destination
- * r1 = virtual user address of ultimate destination page
- */
-ENTRY(xscale_mc_clear_user_page)
- mov r1, #PAGE_SZ/32
- mov r2, #0
- mov r3, #0
-1: mov ip, r0
- strd r2, [r0], #8
- strd r2, [r0], #8
- strd r2, [r0], #8
- strd r2, [r0], #8
- mcr p15, 0, ip, c7, c10, 1 @ clean D line
- subs r1, r1, #1
- mcr p15, 0, ip, c7, c6, 1 @ invalidate D line
- bne 1b
- mov pc, lr
-
- __INITDATA
-
- .type xscale_mc_user_fns, #object
-ENTRY(xscale_mc_user_fns)
- .long xscale_mc_clear_user_page
- .long xscale_mc_copy_user_page
- .size xscale_mc_user_fns, . - xscale_mc_user_fns
diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c
new file mode 100644
index 0000000..42a6ee2
--- /dev/null
+++ b/arch/arm/mm/copypage-xscale.c
@@ -0,0 +1,131 @@
+/*
+ * linux/arch/arm/lib/copypage-xscale.S
+ *
+ * Copyright (C) 1995-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This handles the mini data cache, as found on SA11x0 and XScale
+ * processors. When we copy a user page page, we map it in such a way
+ * that accesses to this page will not touch the main data cache, but
+ * will be cached in the mini data cache. This prevents us thrashing
+ * the main data cache on page faults.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+/*
+ * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
+ * specific hacks for copying pages efficiently.
+ */
+#define COPYPAGE_MINICACHE 0xffff8000
+
+#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
+ L_PTE_CACHEABLE)
+
+#define TOP_PTE(x) pte_offset_kernel(top_pmd, x)
+
+static DEFINE_SPINLOCK(minicache_lock);
+
+/*
+ * XScale mini-dcache optimised copy_user_page
+ *
+ * We flush the destination cache lines just before we write the data into the
+ * corresponding address. Since the Dcache is read-allocate, this removes the
+ * Dcache aliasing issue. The writes will be forwarded to the write buffer,
+ * and merged as appropriate.
+ */
+static void __attribute__((naked))
+mc_copy_user_page(void *from, void *to)
+{
+ /*
+ * Strangely enough, best performance is achieved
+ * when prefetching destination as well. (NP)
+ */
+ asm volatile(
+ "stmfd sp!, {r4, r5, lr} \n\
+ mov lr, %2 \n\
+ pld [r0, #0] \n\
+ pld [r0, #32] \n\
+ pld [r1, #0] \n\
+ pld [r1, #32] \n\
+1: pld [r0, #64] \n\
+ pld [r0, #96] \n\
+ pld [r1, #64] \n\
+ pld [r1, #96] \n\
+2: ldrd r2, [r0], #8 \n\
+ ldrd r4, [r0], #8 \n\
+ mov ip, r1 \n\
+ strd r2, [r1], #8 \n\
+ ldrd r2, [r0], #8 \n\
+ strd r4, [r1], #8 \n\
+ ldrd r4, [r0], #8 \n\
+ strd r2, [r1], #8 \n\
+ strd r4, [r1], #8 \n\
+ mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\
+ ldrd r2, [r0], #8 \n\
+ mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\
+ ldrd r4, [r0], #8 \n\
+ mov ip, r1 \n\
+ strd r2, [r1], #8 \n\
+ ldrd r2, [r0], #8 \n\
+ strd r4, [r1], #8 \n\
+ ldrd r4, [r0], #8 \n\
+ strd r2, [r1], #8 \n\
+ strd r4, [r1], #8 \n\
+ mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\
+ subs lr, lr, #1 \n\
+ mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\
+ bgt 1b \n\
+ beq 2b \n\
+ ldmfd sp!, {r4, r5, pc} "
+ :
+ : "r" (from), "r" (to), "I" (PAGE_SIZE / 64 - 1));
+}
+
+void xscale_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
+{
+ spin_lock(&minicache_lock);
+
+ set_pte(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot));
+ flush_tlb_kernel_page(COPYPAGE_MINICACHE);
+
+ mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto);
+
+ spin_unlock(&minicache_lock);
+}
+
+/*
+ * XScale optimised clear_user_page
+ */
+void __attribute__((naked))
+xscale_mc_clear_user_page(void *kaddr, unsigned long vaddr)
+{
+ asm volatile(
+ "mov r1, %0 \n\
+ mov r2, #0 \n\
+ mov r3, #0 \n\
+1: mov ip, r0 \n\
+ strd r2, [r0], #8 \n\
+ strd r2, [r0], #8 \n\
+ strd r2, [r0], #8 \n\
+ strd r2, [r0], #8 \n\
+ mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\
+ subs r1, r1, #1 \n\
+ mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\
+ bne 1b \n\
+ mov pc, lr"
+ :
+ : "I" (PAGE_SIZE / 32));
+}
+
+struct cpu_user_fns xscale_mc_user_fns __initdata = {
+ .cpu_clear_user_page = xscale_mc_clear_user_page,
+ .cpu_copy_user_page = xscale_mc_copy_user_page,
+};
diff --git a/arch/arm/mm/minicache.c b/arch/arm/mm/minicache.c
deleted file mode 100644
index dedf2ab..0000000
--- a/arch/arm/mm/minicache.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * linux/arch/arm/mm/minicache.c
- *
- * Copyright (C) 2001 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This handles the mini data cache, as found on SA11x0 and XScale
- * processors. When we copy a user page page, we map it in such a way
- * that accesses to this page will not touch the main data cache, but
- * will be cached in the mini data cache. This prevents us thrashing
- * the main data cache on page faults.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-
-/*
- * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
- * specific hacks for copying pages efficiently.
- */
-#define minicache_address (0xffff8000)
-#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
- L_PTE_CACHEABLE)
-
-static pte_t *minicache_pte;
-
-/*
- * Note that this is intended to be called only from the copy_user_page
- * asm code; anything else will require special locking to prevent the
- * mini-cache space being re-used. (Note: probably preempt unsafe).
- *
- * We rely on the fact that the minicache is 2K, and we'll be pushing
- * 4K of data through it, so we don't actually have to specifically
- * flush the minicache when we change the mapping.
- *
- * Note also: assert(PAGE_OFFSET <= virt < high_memory).
- * Unsafe: preempt, kmap.
- */
-unsigned long map_page_minicache(unsigned long virt)
-{
- set_pte(minicache_pte, pfn_pte(__pa(virt) >> PAGE_SHIFT, minicache_pgprot));
- flush_tlb_kernel_page(minicache_address);
-
- return minicache_address;
-}
-
-static int __init minicache_init(void)
-{
- pgd_t *pgd;
- pmd_t *pmd;
-
- spin_lock(&init_mm.page_table_lock);
-
- pgd = pgd_offset_k(minicache_address);
- pmd = pmd_alloc(&init_mm, pgd, minicache_address);
- if (!pmd)
- BUG();
- minicache_pte = pte_alloc_kernel(&init_mm, pmd, minicache_address);
- if (!minicache_pte)
- BUG();
-
- spin_unlock(&init_mm.page_table_lock);
-
- return 0;
-}
-
-core_initcall(minicache_init);
diff --git a/arch/i386/kernel/Makefile b/arch/i386/kernel/Makefile
index 0fbcfe0..51ecd51 100644
--- a/arch/i386/kernel/Makefile
+++ b/arch/i386/kernel/Makefile
@@ -43,7 +43,7 @@
# Note: kbuild does not track this dependency due to usage of .incbin
$(obj)/vsyscall.o: $(obj)/vsyscall-int80.so $(obj)/vsyscall-sysenter.so
targets += $(foreach F,int80 sysenter,vsyscall-$F.o vsyscall-$F.so)
-targets += vsyscall.lds
+targets += vsyscall-note.o vsyscall.lds
# The DSO images are built using a special linker script.
quiet_cmd_syscall = SYSCALL $@
diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c
index 45641a8..0ff65ab 100644
--- a/arch/i386/kernel/apm.c
+++ b/arch/i386/kernel/apm.c
@@ -1222,6 +1222,7 @@
save_processor_state();
err = set_system_power_state(APM_STATE_SUSPEND);
+ ignore_normal_resume = 1;
restore_processor_state();
local_irq_disable();
@@ -1229,7 +1230,6 @@
spin_lock(&i8253_lock);
reinit_timer();
set_time();
- ignore_normal_resume = 1;
spin_unlock(&i8253_lock);
write_sequnlock(&xtime_lock);
diff --git a/arch/ia64/kernel/fsys.S b/arch/ia64/kernel/fsys.S
index 4f3cdef..962b6c4 100644
--- a/arch/ia64/kernel/fsys.S
+++ b/arch/ia64/kernel/fsys.S
@@ -460,9 +460,9 @@
;;
st8 [r2]=r14 // update current->blocked with new mask
- cmpxchg4.acq r14=[r9],r18,ar.ccv // current->thread_info->flags <- r18
+ cmpxchg4.acq r8=[r9],r18,ar.ccv // current->thread_info->flags <- r18
;;
- cmp.ne p6,p0=r17,r14 // update failed?
+ cmp.ne p6,p0=r17,r8 // update failed?
(p6) br.cond.spnt.few 1b // yes -> retry
#ifdef CONFIG_SMP
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index febc091..f1aca7c 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -825,14 +825,16 @@
* XXX Should have an arch-hook for running this after final section
* addresses have been selected...
*/
- /* See if gp can cover the entire core module: */
- uint64_t gp = (uint64_t) mod->module_core + MAX_LTOFF / 2;
- if (mod->core_size >= MAX_LTOFF)
+ uint64_t gp;
+ if (mod->core_size > MAX_LTOFF)
/*
* This takes advantage of fact that SHF_ARCH_SMALL gets allocated
* at the end of the module.
*/
- gp = (uint64_t) mod->module_core + mod->core_size - MAX_LTOFF / 2;
+ gp = mod->core_size - MAX_LTOFF / 2;
+ else
+ gp = mod->core_size / 2;
+ gp = (uint64_t) mod->module_core + ((gp + 7) & -8);
mod->arch.gp = gp;
DEBUGP("%s: placing gp at 0x%lx\n", __FUNCTION__, gp);
}
diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
index 08c8a5e..575a8f6 100644
--- a/arch/ia64/kernel/ptrace.c
+++ b/arch/ia64/kernel/ptrace.c
@@ -635,11 +635,17 @@
{
struct ia64_psr *psr = ia64_psr(ia64_task_regs(task));
+ /*
+ * Prevent migrating this task while
+ * we're fiddling with the FPU state
+ */
+ preempt_disable();
if (ia64_is_local_fpu_owner(task) && psr->mfh) {
psr->mfh = 0;
task->thread.flags |= IA64_THREAD_FPH_VALID;
ia64_save_fpu(&task->thread.fph[0]);
}
+ preempt_enable();
}
/*
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index b7e6b4c..d14692e 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -720,7 +720,8 @@
ia64_set_kr(IA64_KR_PT_BASE, __pa(ia64_imva(empty_zero_page)));
/*
- * Initialize default control register to defer all speculative faults. The
+ * Initialize default control register to defer speculative faults except
+ * for those arising from TLB misses, which are not deferred. The
* kernel MUST NOT depend on a particular setting of these bits (in other words,
* the kernel must have recovery code for all speculative accesses). Turn on
* dcr.lc as per recommendation by the architecture team. Most IA-32 apps
diff --git a/arch/ia64/kernel/traps.c b/arch/ia64/kernel/traps.c
index e82ad78..1861173 100644
--- a/arch/ia64/kernel/traps.c
+++ b/arch/ia64/kernel/traps.c
@@ -111,6 +111,24 @@
siginfo_t siginfo;
int sig, code;
+ /* break.b always sets cr.iim to 0, which causes problems for
+ * debuggers. Get the real break number from the original instruction,
+ * but only for kernel code. User space break.b is left alone, to
+ * preserve the existing behaviour. All break codings have the same
+ * format, so there is no need to check the slot type.
+ */
+ if (break_num == 0 && !user_mode(regs)) {
+ struct ia64_psr *ipsr = ia64_psr(regs);
+ unsigned long *bundle = (unsigned long *)regs->cr_iip;
+ unsigned long slot;
+ switch (ipsr->ri) {
+ case 0: slot = (bundle[0] >> 5); break;
+ case 1: slot = (bundle[0] >> 46) | (bundle[1] << 18); break;
+ default: slot = (bundle[1] >> 23); break;
+ }
+ break_num = ((slot >> 36 & 1) << 20) | (slot >> 6 & 0xfffff);
+ }
+
/* SIGILL, SIGFPE, SIGSEGV, and SIGBUS want these field initialized: */
siginfo.si_addr = (void __user *) (regs->cr_iip + ia64_psr(regs)->ri);
siginfo.si_imm = break_num;
@@ -202,13 +220,21 @@
/* first, grant user-level access to fph partition: */
psr->dfh = 0;
+
+ /*
+ * Make sure that no other task gets in on this processor
+ * while we're claiming the FPU
+ */
+ preempt_disable();
#ifndef CONFIG_SMP
{
struct task_struct *fpu_owner
= (struct task_struct *)ia64_get_kr(IA64_KR_FPU_OWNER);
- if (ia64_is_local_fpu_owner(current))
+ if (ia64_is_local_fpu_owner(current)) {
+ preempt_enable_no_resched();
return;
+ }
if (fpu_owner)
ia64_flush_fph(fpu_owner);
@@ -226,6 +252,7 @@
*/
psr->mfh = 1;
}
+ preempt_enable_no_resched();
}
static inline int
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 547785e..4eb2f52 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -305,8 +305,9 @@
struct page *page;
/*
- * Map the gate page twice: once read-only to export the ELF headers etc. and once
- * execute-only page to enable privilege-promotion via "epc":
+ * Map the gate page twice: once read-only to export the ELF
+ * headers etc. and once execute-only page to enable
+ * privilege-promotion via "epc":
*/
page = virt_to_page(ia64_imva(__start_gate_section));
put_kernel_page(page, GATE_ADDR, PAGE_READONLY);
@@ -315,6 +316,20 @@
put_kernel_page(page, GATE_ADDR + PAGE_SIZE, PAGE_GATE);
#else
put_kernel_page(page, GATE_ADDR + PERCPU_PAGE_SIZE, PAGE_GATE);
+ /* Fill in the holes (if any) with read-only zero pages: */
+ {
+ unsigned long addr;
+
+ for (addr = GATE_ADDR + PAGE_SIZE;
+ addr < GATE_ADDR + PERCPU_PAGE_SIZE;
+ addr += PAGE_SIZE)
+ {
+ put_kernel_page(ZERO_PAGE(0), addr,
+ PAGE_READONLY);
+ put_kernel_page(ZERO_PAGE(0), addr + PERCPU_PAGE_SIZE,
+ PAGE_READONLY);
+ }
+ }
#endif
ia64_patch_gate();
}
diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c
index e64cb81..44bfc7f 100644
--- a/arch/ia64/sn/kernel/setup.c
+++ b/arch/ia64/sn/kernel/setup.c
@@ -222,7 +222,7 @@
extern int platform_intr_list[];
extern nasid_t master_nasid;
-static int shub_1_1_found __initdata;
+static int __initdata shub_1_1_found = 0;
/*
* sn_check_for_wars
@@ -251,7 +251,7 @@
} else {
for_each_online_node(cnode) {
if (is_shub_1_1(cnodeid_to_nasid(cnode)))
- sn_hub_info->shub_1_1_found = 1;
+ shub_1_1_found = 1;
}
}
}
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 7dbf997..5649fba 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr 5 14:05:59 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun 7 20:34:23 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -35,6 +35,8 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -135,7 +137,6 @@
#
CONFIG_AMIGA_FLOPPY=y
CONFIG_AMIGA_Z2RAM=y
-# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
@@ -223,17 +224,12 @@
#
# SCSI low-level drivers
#
-# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_PPA is not set
@@ -244,7 +240,6 @@
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_A3000_SCSI=y
CONFIG_A2091_SCSI=y
@@ -492,7 +487,6 @@
CONFIG_ZORRO8390=m
CONFIG_APNE=m
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
@@ -620,7 +614,6 @@
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 505a296..63024b0 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr 5 14:06:00 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun 7 20:34:27 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -35,6 +35,8 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -497,7 +499,6 @@
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index 617aa73..6433da2 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr 5 14:06:18 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun 7 20:34:32 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -35,6 +35,8 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -531,7 +533,6 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index b501db5..da2a23a 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr 5 14:06:19 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun 7 20:34:37 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -35,6 +35,8 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -496,7 +498,6 @@
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 2bf6cef..5125188 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr 5 14:06:21 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun 7 20:34:41 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -35,6 +35,8 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -498,7 +500,6 @@
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 7074f85..15b80ab 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr 5 14:06:24 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun 7 20:34:45 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -35,6 +35,8 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -540,7 +542,6 @@
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index 61f09bc..f0d5534 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr 5 14:06:28 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun 7 20:34:50 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -35,6 +35,8 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -498,7 +500,6 @@
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 69c0100..1d5c46f 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr 5 14:06:31 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun 7 20:34:53 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -35,6 +35,8 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -497,7 +499,6 @@
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 550ec260..8562386 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr 5 14:06:34 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun 7 20:34:58 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -35,6 +35,8 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -125,7 +127,6 @@
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
@@ -210,17 +211,12 @@
#
# SCSI low-level drivers
#
-# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_NCR53C406A is not set
@@ -229,7 +225,6 @@
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_DEBUG is not set
#
@@ -466,7 +461,6 @@
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
@@ -570,7 +564,6 @@
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index 5b5a619..af903b5 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr 5 14:06:37 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun 7 20:35:02 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -35,6 +35,8 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -171,7 +173,6 @@
#
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_DEBUG is not set
-CONFIG_SUN3_SCSI=y
#
# Multi-device support (RAID and LVM)
@@ -487,7 +488,6 @@
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 704e423..997143b 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr 5 14:06:40 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun 7 20:35:06 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -35,6 +35,8 @@
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -497,7 +499,6 @@
CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
diff --git a/arch/m68k/defconfig b/arch/m68k/defconfig
index 5b2296e..7d935e4 100644
--- a/arch/m68k/defconfig
+++ b/arch/m68k/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc2-m68k
-# Tue Apr 5 14:05:31 2005
+# Linux kernel version: 2.6.12-rc6-m68k
+# Tue Jun 7 20:34:17 2005
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -33,6 +33,8 @@
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -355,7 +357,6 @@
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
diff --git a/arch/m68knommu/kernel/process.c b/arch/m68knommu/kernel/process.c
index 2b6c9d3..c4a33f2 100644
--- a/arch/m68knommu/kernel/process.c
+++ b/arch/m68knommu/kernel/process.c
@@ -45,11 +45,13 @@
*/
void default_idle(void)
{
- while(1) {
- if (need_resched())
- __asm__("stop #0x2000" : : : "cc");
- schedule();
+ local_irq_disable();
+ while (!need_resched()) {
+ /* This stop will re-enable interrupts */
+ __asm__("stop #0x2000" : : : "cc");
+ local_irq_disable();
}
+ local_irq_enable();
}
void (*idle)(void) = default_idle;
@@ -63,7 +65,12 @@
void cpu_idle(void)
{
/* endless idle loop with no priority at all */
- idle();
+ while (1) {
+ idle();
+ preempt_enable_no_resched();
+ schedule();
+ preempt_disable();
+ }
}
void machine_restart(char * __unused)
diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c
index 8aa5e8c..d44b7dc 100644
--- a/arch/ppc/kernel/cputable.c
+++ b/arch/ppc/kernel/cputable.c
@@ -838,6 +838,17 @@
.icache_bsize = 32,
.dcache_bsize = 32,
},
+ { /* 405EP */
+ .pvr_mask = 0xffff0000,
+ .pvr_value = 0x51210000,
+ .cpu_name = "405EP",
+ .cpu_features = CPU_FTR_SPLIT_ID_CACHE |
+ CPU_FTR_USE_TB,
+ .cpu_user_features = PPC_FEATURE_32 |
+ PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .icache_bsize = 32,
+ .dcache_bsize = 32,
+ },
#endif /* CONFIG_40x */
#ifdef CONFIG_44x
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
index e4f1615..7329ef1 100644
--- a/arch/ppc/kernel/misc.S
+++ b/arch/ppc/kernel/misc.S
@@ -619,7 +619,7 @@
_GLOBAL(flush_icache_range)
BEGIN_FTR_SECTION
blr /* for 601, do nothing */
-END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE)
+END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
li r5,L1_CACHE_LINE_SIZE-1
andc r3,r3,r5
subf r4,r3,r4
@@ -736,7 +736,7 @@
_GLOBAL(__flush_dcache_icache)
BEGIN_FTR_SECTION
blr /* for 601, do nothing */
-END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE)
+END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
rlwinm r3,r3,0,0,19 /* Get page base address */
li r4,4096/L1_CACHE_LINE_SIZE /* Number of lines in a page */
mtctr r4
@@ -764,7 +764,7 @@
_GLOBAL(__flush_dcache_icache_phys)
BEGIN_FTR_SECTION
blr /* for 601, do nothing */
-END_FTR_SECTION_IFSET(PPC_FEATURE_UNIFIED_CACHE)
+END_FTR_SECTION_IFCLR(CPU_FTR_SPLIT_ID_CACHE)
mfmsr r10
rlwinm r0,r10,0,28,26 /* clear DR */
mtmsr r0
diff --git a/arch/ppc/platforms/pmac_cpufreq.c b/arch/ppc/platforms/pmac_cpufreq.c
index 937f46d..5fdd4f6 100644
--- a/arch/ppc/platforms/pmac_cpufreq.c
+++ b/arch/ppc/platforms/pmac_cpufreq.c
@@ -83,7 +83,7 @@
static u32 slew_done_gpio;
static int no_schedule;
static int has_cpu_l2lve;
-
+static int is_pmu_based;
/* There are only two frequency states for each processor. Values
* are in kHz for the time being.
@@ -463,7 +463,7 @@
*/
no_schedule = 1;
sleep_freq = cur_freq;
- if (cur_freq == low_freq)
+ if (cur_freq == low_freq && !is_pmu_based)
do_set_cpu_speed(CPUFREQ_HIGH, 0);
return 0;
}
@@ -588,6 +588,7 @@
return 1;
hi_freq = (*value) / 1000;
set_speed_proc = pmu_set_cpu_speed;
+ is_pmu_based = 1;
return 0;
}
@@ -692,6 +693,7 @@
hi_freq = cur_freq;
low_freq = 400000;
set_speed_proc = pmu_set_cpu_speed;
+ is_pmu_based = 1;
}
/* Else check for TiPb 400 & 500 */
else if (machine_is_compatible("PowerBook3,2")) {
@@ -703,6 +705,7 @@
hi_freq = cur_freq;
low_freq = 300000;
set_speed_proc = pmu_set_cpu_speed;
+ is_pmu_based = 1;
}
/* Else check for 750FX */
else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000)
diff --git a/arch/ppc64/boot/prom.c b/arch/ppc64/boot/prom.c
index 7b607d1..d5218b1 100644
--- a/arch/ppc64/boot/prom.c
+++ b/arch/ppc64/boot/prom.c
@@ -11,6 +11,23 @@
#include <linux/string.h>
#include <linux/ctype.h>
+extern __u32 __div64_32(unsigned long long *dividend, __u32 divisor);
+
+/* The unnecessary pointer compare is there
+ * to check for type safety (n must be 64bit)
+ */
+# define do_div(n,base) ({ \
+ __u32 __base = (base); \
+ __u32 __rem; \
+ (void)(((typeof((n)) *)0) == ((unsigned long long *)0)); \
+ if (((n) >> 32) == 0) { \
+ __rem = (__u32)(n) % __base; \
+ (n) = (__u32)(n) / __base; \
+ } else \
+ __rem = __div64_32(&(n), __base); \
+ __rem; \
+ })
+
int (*prom)(void *);
void *chosen_handle;
@@ -352,7 +369,7 @@
#define SPECIAL 32 /* 0x */
#define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */
-static char * number(char * str, long num, int base, int size, int precision, int type)
+static char * number(char * str, unsigned long long num, int base, int size, int precision, int type)
{
char c,sign,tmp[66];
const char *digits="0123456789abcdefghijklmnopqrstuvwxyz";
@@ -367,9 +384,9 @@
c = (type & ZEROPAD) ? '0' : ' ';
sign = 0;
if (type & SIGN) {
- if (num < 0) {
+ if ((signed long long)num < 0) {
sign = '-';
- num = -num;
+ num = - (signed long long)num;
size--;
} else if (type & PLUS) {
sign = '+';
@@ -389,8 +406,7 @@
if (num == 0)
tmp[i++]='0';
else while (num != 0) {
- tmp[i++] = digits[num % base];
- num /= base;
+ tmp[i++] = digits[do_div(num, base)];
}
if (i > precision)
precision = i;
@@ -426,7 +442,7 @@
int vsprintf(char *buf, const char *fmt, va_list args)
{
int len;
- unsigned long num;
+ unsigned long long num;
int i, base;
char * str;
const char *s;
diff --git a/arch/ppc64/configs/g5_defconfig b/arch/ppc64/configs/g5_defconfig
index 0f90df0..1eb3339 100644
--- a/arch/ppc64/configs/g5_defconfig
+++ b/arch/ppc64/configs/g5_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Thu Mar 10 16:47:04 2005
+# Linux kernel version: 2.6.12-rc6
+# Tue Jun 14 16:59:20 2005
#
CONFIG_64BIT=y
CONFIG_MMU=y
@@ -11,7 +11,7 @@
CONFIG_HAVE_DEC_LOCK=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_FORCE_MAX_ZONEORDER=13
#
@@ -20,6 +20,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -31,19 +32,20 @@
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=17
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
@@ -87,6 +89,8 @@
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT is not set
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
#
# General setup
@@ -97,6 +101,7 @@
# CONFIG_BINFMT_MISC is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
# CONFIG_HOTPLUG_CPU is not set
#
@@ -105,10 +110,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -293,7 +294,6 @@
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
@@ -301,7 +301,6 @@
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -310,6 +309,7 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
@@ -332,6 +332,7 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
@@ -394,7 +395,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
@@ -564,6 +564,8 @@
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
#
# Ethernet (10000 Mbit)
@@ -631,18 +633,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -660,6 +650,16 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -676,6 +676,7 @@
# Non-8250 serial port support
#
# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -698,9 +699,12 @@
#
# Ftape, the floppy tape device driver
#
+CONFIG_AGP=m
+CONFIG_AGP_UNINORTH=m
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
@@ -730,12 +734,11 @@
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_KEYWEST=y
-# CONFIG_I2C_MPC is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
@@ -772,6 +775,7 @@
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
@@ -785,6 +789,7 @@
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
@@ -817,6 +822,11 @@
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+CONFIG_FB_MACMODES=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
@@ -830,6 +840,7 @@
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=y
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
@@ -847,6 +858,7 @@
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -880,6 +892,8 @@
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
@@ -890,8 +904,6 @@
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
@@ -917,7 +929,6 @@
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_RW_DETECT=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
@@ -1004,8 +1015,10 @@
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1034,6 +1047,7 @@
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_TI=m
@@ -1270,11 +1284,13 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
-# CONFIG_PRINTK_TIME is not set
+CONFIG_LOG_BUF_SHIFT=17
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
diff --git a/arch/ppc64/configs/iSeries_defconfig b/arch/ppc64/configs/iSeries_defconfig
index a39e9d2..f6a2b99 100644
--- a/arch/ppc64/configs/iSeries_defconfig
+++ b/arch/ppc64/configs/iSeries_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc3-bk6
-# Wed Feb 9 23:34:52 2005
+# Linux kernel version: 2.6.12-rc6
+# Tue Jun 14 17:01:28 2005
#
CONFIG_64BIT=y
CONFIG_MMU=y
@@ -11,7 +11,7 @@
CONFIG_HAVE_DEC_LOCK=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_FORCE_MAX_ZONEORDER=13
#
@@ -20,6 +20,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -30,24 +31,29 @@
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=17
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -79,6 +85,8 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_MSCHUNKS=y
CONFIG_LPARCFG=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
#
# General setup
@@ -89,6 +97,7 @@
# CONFIG_BINFMT_MISC is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -96,10 +105,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -210,7 +215,6 @@
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
@@ -219,7 +223,6 @@
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -228,6 +231,7 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
@@ -250,6 +254,7 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
#
# Fusion MPT device support
@@ -280,7 +285,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
@@ -445,7 +449,6 @@
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
@@ -471,6 +474,7 @@
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
@@ -539,14 +543,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -556,6 +552,12 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
# CONFIG_SERIAL_NONSTANDARD is not set
@@ -570,6 +572,7 @@
#
CONFIG_SERIAL_CORE=m
CONFIG_SERIAL_ICOM=m
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -592,9 +595,16 @@
#
# Ftape, the floppy tape device driver
#
+# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
#
# I2C support
@@ -633,13 +643,9 @@
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -848,10 +854,13 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
@@ -881,6 +890,7 @@
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
diff --git a/arch/ppc64/configs/maple_defconfig b/arch/ppc64/configs/maple_defconfig
index cf52750..8051b0f 100644
--- a/arch/ppc64/configs/maple_defconfig
+++ b/arch/ppc64/configs/maple_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc3-bk6
-# Wed Feb 9 23:34:53 2005
+# Linux kernel version: 2.6.12-rc6
+# Tue Jun 14 17:12:48 2005
#
CONFIG_64BIT=y
CONFIG_MMU=y
@@ -11,7 +11,7 @@
CONFIG_HAVE_DEC_LOCK=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_FORCE_MAX_ZONEORDER=13
#
@@ -20,6 +20,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -30,24 +31,28 @@
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -84,6 +89,8 @@
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT is not set
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
#
# General setup
@@ -94,6 +101,7 @@
# CONFIG_BINFMT_MISC is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -101,10 +109,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
@@ -261,7 +265,6 @@
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -376,6 +379,8 @@
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
#
# Ethernet (10000 Mbit)
@@ -432,14 +437,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
@@ -449,6 +446,12 @@
# CONFIG_INPUT_MISC is not set
#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -469,7 +472,7 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -492,8 +495,15 @@
#
# Ftape, the floppy tape device driver
#
+# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
#
# I2C support
@@ -518,8 +528,8 @@
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_MPC is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
@@ -545,7 +555,9 @@
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
@@ -556,9 +568,11 @@
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
@@ -568,6 +582,7 @@
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
@@ -615,6 +630,8 @@
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
@@ -625,8 +642,6 @@
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
@@ -635,6 +650,8 @@
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
@@ -688,6 +705,7 @@
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -699,8 +717,10 @@
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP2101 is not set
CONFIG_USB_SERIAL_CYPRESS_M8=m
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
@@ -729,6 +749,7 @@
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
CONFIG_USB_SERIAL_TI=m
# CONFIG_USB_SERIAL_CYBERJACK is not set
@@ -750,6 +771,7 @@
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set
#
@@ -936,10 +958,13 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
+# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
@@ -971,6 +996,7 @@
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
diff --git a/arch/ppc64/configs/pSeries_defconfig b/arch/ppc64/configs/pSeries_defconfig
index 4fecf23..3eb5ef2 100644
--- a/arch/ppc64/configs/pSeries_defconfig
+++ b/arch/ppc64/configs/pSeries_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc3-bk6
-# Wed Feb 9 23:34:54 2005
+# Linux kernel version: 2.6.12-rc6
+# Tue Jun 14 17:13:47 2005
#
CONFIG_64BIT=y
CONFIG_MMU=y
@@ -11,7 +11,7 @@
CONFIG_HAVE_DEC_LOCK=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_FORCE_MAX_ZONEORDER=13
#
@@ -20,6 +20,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -30,24 +31,29 @@
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=17
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_CPUSETS=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -89,9 +95,12 @@
CONFIG_EEH=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_PPC_RTAS=y
+CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=m
CONFIG_SCANLOG=m
CONFIG_LPARCFG=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
#
# General setup
@@ -102,6 +111,7 @@
# CONFIG_BINFMT_MISC is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_HOTPLUG_CPU=y
#
@@ -110,10 +120,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
@@ -147,11 +153,10 @@
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
+# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set
#
@@ -293,7 +298,6 @@
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
@@ -310,7 +314,6 @@
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -319,6 +322,7 @@
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
CONFIG_SCSI_QLA6312=m
+CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
@@ -341,6 +345,8 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
@@ -371,7 +377,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
@@ -539,7 +544,6 @@
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
@@ -565,6 +569,8 @@
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
#
# Ethernet (10000 Mbit)
@@ -636,20 +642,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -669,6 +661,18 @@
# CONFIG_INPUT_UINPUT is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -689,8 +693,8 @@
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_PMACZILOG is not set
CONFIG_SERIAL_ICOM=m
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -718,9 +722,16 @@
#
# Ftape, the floppy tape device driver
#
+# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=1024
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
#
# I2C support
@@ -745,8 +756,8 @@
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
-# CONFIG_I2C_MPC is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@@ -773,7 +784,9 @@
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
@@ -784,9 +797,11 @@
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
@@ -796,6 +811,7 @@
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
@@ -828,8 +844,13 @@
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+CONFIG_FB_MACMODES=y
CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
@@ -838,6 +859,7 @@
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
@@ -858,6 +880,7 @@
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -891,6 +914,8 @@
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
@@ -901,8 +926,6 @@
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
@@ -911,6 +934,8 @@
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
@@ -926,12 +951,11 @@
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
@@ -975,6 +999,7 @@
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -1000,6 +1025,7 @@
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set
#
@@ -1208,10 +1234,13 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
@@ -1243,6 +1272,7 @@
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
diff --git a/arch/ppc64/defconfig b/arch/ppc64/defconfig
index 537b1cc..2f31bf3 100644
--- a/arch/ppc64/defconfig
+++ b/arch/ppc64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc3-bk6
-# Wed Feb 9 23:34:51 2005
+# Linux kernel version: 2.6.12-rc5-git9
+# Sun Jun 5 09:26:47 2005
#
CONFIG_64BIT=y
CONFIG_MMU=y
@@ -11,7 +11,7 @@
CONFIG_HAVE_DEC_LOCK=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
-CONFIG_FRAME_POINTER=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_FORCE_MAX_ZONEORDER=13
#
@@ -20,6 +20,7 @@
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -30,24 +31,28 @@
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_AUDIT is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_CPUSETS=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -91,9 +96,12 @@
CONFIG_EEH=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_PPC_RTAS=y
+CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=m
CONFIG_SCANLOG=m
CONFIG_LPARCFG=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
#
# General setup
@@ -104,6 +112,7 @@
CONFIG_BINFMT_MISC=m
# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_NAMES is not set
+# CONFIG_PCI_DEBUG is not set
CONFIG_HOTPLUG_CPU=y
#
@@ -112,10 +121,6 @@
# CONFIG_PCCARD is not set
#
-# PC-card bridges
-#
-
-#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
@@ -149,11 +154,10 @@
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
-# CONFIG_PARPORT_OTHER is not set
+# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set
#
@@ -301,6 +305,7 @@
# CONFIG_SCSI_ATA_PIIX is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_SATA_PROMISE is not set
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
@@ -310,7 +315,6 @@
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
@@ -327,7 +331,6 @@
CONFIG_SCSI_IPR=y
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -336,6 +339,7 @@
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
CONFIG_SCSI_QLA6312=m
+CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
@@ -358,6 +362,8 @@
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
@@ -405,6 +411,7 @@
#
CONFIG_ADB=y
CONFIG_ADB_PMU=y
+CONFIG_PMAC_SMU=y
# CONFIG_PMAC_PBOOK is not set
# CONFIG_PMAC_BACKLIGHT is not set
# CONFIG_INPUT_ADBHID is not set
@@ -420,7 +427,6 @@
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
@@ -588,7 +594,6 @@
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
@@ -614,6 +619,8 @@
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+# CONFIG_MV643XX_ETH is not set
#
# Ethernet (10000 Mbit)
@@ -683,20 +690,6 @@
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-
-#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
@@ -716,6 +709,18 @@
# CONFIG_INPUT_UINPUT is not set
#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
# Character devices
#
CONFIG_VT=y
@@ -738,6 +743,7 @@
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_PMACZILOG is not set
CONFIG_SERIAL_ICOM=m
+CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -766,9 +772,16 @@
#
# Ftape, the floppy tape device driver
#
+# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
#
# I2C support
@@ -793,9 +806,9 @@
CONFIG_I2C_AMD8111=y
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_ISA is not set
CONFIG_I2C_KEYWEST=y
-# CONFIG_I2C_MPC is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
@@ -822,7 +835,9 @@
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
@@ -833,9 +848,11 @@
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_W83781D is not set
@@ -845,6 +862,7 @@
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
@@ -877,6 +895,11 @@
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+CONFIG_FB_MACMODES=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
@@ -890,9 +913,8 @@
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
-CONFIG_FB_RIVA=y
-CONFIG_FB_RIVA_I2C=y
-# CONFIG_FB_RIVA_DEBUG is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
CONFIG_FB_MATROX=y
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
@@ -913,6 +935,7 @@
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
@@ -946,6 +969,8 @@
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
@@ -956,8 +981,6 @@
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
@@ -966,6 +989,8 @@
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
@@ -981,12 +1006,11 @@
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_RW_DETECT=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
@@ -1030,6 +1054,7 @@
CONFIG_USB_PEGASUS=y
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
#
# USB port drivers
@@ -1055,6 +1080,7 @@
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_TEST is not set
#
@@ -1276,10 +1302,13 @@
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=17
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
@@ -1311,6 +1340,7 @@
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
diff --git a/arch/ppc64/kernel/entry.S b/arch/ppc64/kernel/entry.S
index d360405..b61572e 100644
--- a/arch/ppc64/kernel/entry.S
+++ b/arch/ppc64/kernel/entry.S
@@ -436,15 +436,6 @@
REST_8GPRS(14, r1)
REST_10GPRS(22, r1)
-#ifdef CONFIG_PPC_ISERIES
- clrrdi r7,r1,THREAD_SHIFT /* get current_thread_info() */
- ld r7,TI_FLAGS(r7) /* Get run light flag */
- mfspr r9,CTRLF
- srdi r7,r7,TIF_RUN_LIGHT
- insrdi r9,r7,1,63 /* Insert run light into CTRL */
- mtspr CTRLT,r9
-#endif
-
/* convert old thread to its task_struct for return value */
addi r3,r3,-THREAD
ld r7,_NIP(r1) /* Return to _switch caller in new task */
diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S
index 92a744c..346dbf6 100644
--- a/arch/ppc64/kernel/head.S
+++ b/arch/ppc64/kernel/head.S
@@ -626,10 +626,10 @@
lhz r24,PACAPACAINDEX(r13) /* Get processor # */
cmpwi 0,r24,0 /* Are we processor 0? */
beq .__start_initialization_iSeries /* Start up the first processor */
- mfspr r4,CTRLF
- li r5,RUNLATCH /* Turn off the run light */
+ mfspr r4,SPRN_CTRLF
+ li r5,CTRL_RUNLATCH /* Turn off the run light */
andc r4,r4,r5
- mtspr CTRLT,r4
+ mtspr SPRN_CTRLT,r4
1:
HMT_LOW
@@ -2082,9 +2082,9 @@
mfspr r4, HID0
ori r4, r4, 0x1
mtspr HID0, r4
- mfspr r4, CTRLF
+ mfspr r4, SPRN_CTRLF
oris r4, r4, 0x40
- mtspr CTRLT, r4
+ mtspr SPRN_CTRLT, r4
blr
#endif
diff --git a/arch/ppc64/kernel/iSeries_setup.c b/arch/ppc64/kernel/iSeries_setup.c
index da20120..6d06eb5 100644
--- a/arch/ppc64/kernel/iSeries_setup.c
+++ b/arch/ppc64/kernel/iSeries_setup.c
@@ -852,6 +852,28 @@
late_initcall(iSeries_src_init);
+static int set_spread_lpevents(char *str)
+{
+ unsigned long i;
+ unsigned long val = simple_strtoul(str, NULL, 0);
+
+ /*
+ * The parameter is the number of processors to share in processing
+ * lp events.
+ */
+ if (( val > 0) && (val <= NR_CPUS)) {
+ for (i = 1; i < val; ++i)
+ paca[i].lpqueue_ptr = paca[0].lpqueue_ptr;
+
+ printk("lpevent processing spread over %ld processors\n", val);
+ } else {
+ printk("invalid spread_lpevents %ld\n", val);
+ }
+
+ return 1;
+}
+__setup("spread_lpevents=", set_spread_lpevents);
+
void __init iSeries_early_setup(void)
{
iSeries_fixup_klimit();
diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c
index 6abc621..f24ce2b 100644
--- a/arch/ppc64/kernel/idle.c
+++ b/arch/ppc64/kernel/idle.c
@@ -75,13 +75,9 @@
{
struct paca_struct *lpaca;
long oldval;
- unsigned long CTRL;
/* ensure iSeries run light will be out when idle */
- clear_thread_flag(TIF_RUN_LIGHT);
- CTRL = mfspr(CTRLF);
- CTRL &= ~RUNLATCH;
- mtspr(CTRLT, CTRL);
+ ppc64_runlatch_off();
lpaca = get_paca();
@@ -111,7 +107,9 @@
}
}
+ ppc64_runlatch_on();
schedule();
+ ppc64_runlatch_off();
}
return 0;
diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c
index 103daaf..e950a20 100644
--- a/arch/ppc64/kernel/kprobes.c
+++ b/arch/ppc64/kernel/kprobes.c
@@ -45,12 +45,17 @@
int arch_prepare_kprobe(struct kprobe *p)
{
+ int ret = 0;
kprobe_opcode_t insn = *p->addr;
- if (IS_MTMSRD(insn) || IS_RFID(insn))
- /* cannot put bp on RFID/MTMSRD */
- return 1;
- return 0;
+ if ((unsigned long)p->addr & 0x03) {
+ printk("Attempt to register kprobe at an unaligned address\n");
+ ret = -EINVAL;
+ } else if (IS_MTMSRD(insn) || IS_RFID(insn)) {
+ printk("Cannot register a kprobe on rfid or mtmsrd\n");
+ ret = -EINVAL;
+ }
+ return ret;
}
void arch_copy_kprobe(struct kprobe *p)
@@ -172,8 +177,6 @@
ret = emulate_step(regs, p->ainsn.insn[0]);
if (ret == 0)
regs->nip = (unsigned long)p->addr + 4;
-
- regs->msr &= ~MSR_SE;
}
static inline int post_kprobe_handler(struct pt_regs *regs)
@@ -210,6 +213,7 @@
if (kprobe_status & KPROBE_HIT_SS) {
resume_execution(current_kprobe, regs);
+ regs->msr &= ~MSR_SE;
regs->msr |= kprobe_saved_msr;
unlock_kprobes();
@@ -233,8 +237,6 @@
*/
preempt_disable();
switch (val) {
- case DIE_IABR_MATCH:
- case DIE_DABR_MATCH:
case DIE_BPT:
if (kprobe_handler(args->regs))
ret = NOTIFY_STOP;
diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S
index b944717..e3c73b3 100644
--- a/arch/ppc64/kernel/misc.S
+++ b/arch/ppc64/kernel/misc.S
@@ -792,7 +792,7 @@
.llong .compat_sys_newstat
.llong .compat_sys_newlstat
.llong .compat_sys_newfstat
- .llong .sys_uname
+ .llong .sys32_uname
.llong .sys_ni_syscall /* 110 old iopl syscall */
.llong .sys_vhangup
.llong .sys_ni_syscall /* old idle syscall */
diff --git a/arch/ppc64/kernel/process.c b/arch/ppc64/kernel/process.c
index 8b06861..cdfecbe 100644
--- a/arch/ppc64/kernel/process.c
+++ b/arch/ppc64/kernel/process.c
@@ -378,9 +378,6 @@
childregs->gpr[1] = sp + sizeof(struct pt_regs);
p->thread.regs = NULL; /* no user register state */
clear_ti_thread_flag(p->thread_info, TIF_32BIT);
-#ifdef CONFIG_PPC_ISERIES
- set_ti_thread_flag(p->thread_info, TIF_RUN_LIGHT);
-#endif
} else {
childregs->gpr[1] = usp;
p->thread.regs = childregs;
diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c
index 3de950d..b7683ab 100644
--- a/arch/ppc64/kernel/prom_init.c
+++ b/arch/ppc64/kernel/prom_init.c
@@ -211,13 +211,23 @@
*/
#define ADDR(x) (u32) ((unsigned long)(x) - offset)
+/*
+ * Error results ... some OF calls will return "-1" on error, some
+ * will return 0, some will return either. To simplify, here are
+ * macros to use with any ihandle or phandle return value to check if
+ * it is valid
+ */
+
+#define PROM_ERROR (-1u)
+#define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR)
+#define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR)
+
+
/* This is the one and *ONLY* place where we actually call open
* firmware from, since we need to make sure we're running in 32b
* mode when we do. We switch back to 64b mode upon return.
*/
-#define PROM_ERROR (-1)
-
static int __init call_prom(const char *service, int nargs, int nret, ...)
{
int i;
@@ -587,14 +597,13 @@
{
unsigned long offset = reloc_offset();
ihandle elfloader;
- int ret;
elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader"));
if (elfloader == 0) {
prom_printf("couldn't open /packages/elf-loader\n");
return;
}
- ret = call_prom("call-method", 3, 1, ADDR("process-elf-header"),
+ call_prom("call-method", 3, 1, ADDR("process-elf-header"),
elfloader, ADDR(&fake_elf));
call_prom("close", 1, 0, elfloader);
}
@@ -646,7 +655,7 @@
base = _ALIGN_UP(base + 0x100000, align)) {
prom_debug(" trying: 0x%x\n\r", base);
addr = (unsigned long)prom_claim(base, size, 0);
- if ((int)addr != PROM_ERROR)
+ if (addr != PROM_ERROR)
break;
addr = 0;
if (align == 0)
@@ -708,7 +717,7 @@
for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align)) {
prom_debug(" trying: 0x%x\n\r", base);
addr = (unsigned long)prom_claim(base, size, 0);
- if ((int)addr != PROM_ERROR)
+ if (addr != PROM_ERROR)
break;
addr = 0;
}
@@ -902,18 +911,19 @@
{
unsigned long offset = reloc_offset();
struct prom_t *_prom = PTRRELOC(&prom);
- phandle prom_rtas, rtas_node;
+ phandle rtas_node;
+ ihandle rtas_inst;
u32 base, entry = 0;
u32 size = 0;
prom_debug("prom_instantiate_rtas: start...\n");
- prom_rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
- prom_debug("prom_rtas: %x\n", prom_rtas);
- if (prom_rtas == (phandle) -1)
+ rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas"));
+ prom_debug("rtas_node: %x\n", rtas_node);
+ if (!PHANDLE_VALID(rtas_node))
return;
- prom_getprop(prom_rtas, "rtas-size", &size, sizeof(size));
+ prom_getprop(rtas_node, "rtas-size", &size, sizeof(size));
if (size == 0)
return;
@@ -922,14 +932,18 @@
prom_printf("RTAS allocation failed !\n");
return;
}
- prom_printf("instantiating rtas at 0x%x", base);
- rtas_node = call_prom("open", 1, 1, ADDR("/rtas"));
- prom_printf("...");
+ rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
+ if (!IHANDLE_VALID(rtas_inst)) {
+ prom_printf("opening rtas package failed");
+ return;
+ }
+
+ prom_printf("instantiating rtas at 0x%x ...", base);
if (call_prom("call-method", 3, 2,
ADDR("instantiate-rtas"),
- rtas_node, base) != PROM_ERROR) {
+ rtas_inst, base) != PROM_ERROR) {
entry = (long)_prom->args.rets[1];
}
if (entry == 0) {
@@ -940,8 +954,8 @@
reserve_mem(base, size);
- prom_setprop(prom_rtas, "linux,rtas-base", &base, sizeof(base));
- prom_setprop(prom_rtas, "linux,rtas-entry", &entry, sizeof(entry));
+ prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base));
+ prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry));
prom_debug("rtas base = 0x%x\n", base);
prom_debug("rtas entry = 0x%x\n", entry);
@@ -1062,7 +1076,7 @@
prom_printf("opening PHB %s", path);
phb_node = call_prom("open", 1, 1, path);
- if ( (long)phb_node <= 0)
+ if (phb_node == 0)
prom_printf("... failed\n");
else
prom_printf("... done\n");
@@ -1279,12 +1293,12 @@
/* get a handle for the stdout device */
_prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen"));
- if ((long)_prom->chosen <= 0)
+ if (!PHANDLE_VALID(_prom->chosen))
prom_panic("cannot find chosen"); /* msg won't be printed :( */
/* get device tree root */
_prom->root = call_prom("finddevice", 1, 1, ADDR("/"));
- if ((long)_prom->root <= 0)
+ if (!PHANDLE_VALID(_prom->root))
prom_panic("cannot find device tree root"); /* msg won't be printed :( */
}
@@ -1356,9 +1370,8 @@
}
/* Default to pSeries. We need to know if we are running LPAR */
rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
- if (rtas != (phandle) -1) {
- unsigned long x;
- x = prom_getproplen(rtas, "ibm,hypertas-functions");
+ if (PHANDLE_VALID(rtas)) {
+ int x = prom_getproplen(rtas, "ibm,hypertas-functions");
if (x != PROM_ERROR) {
prom_printf("Hypertas detected, assuming LPAR !\n");
return PLATFORM_PSERIES_LPAR;
@@ -1426,12 +1439,13 @@
* leave some room at the end of the path for appending extra
* arguments
*/
- if (call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-10) < 0)
+ if (call_prom("package-to-path", 3, 1, node, path,
+ PROM_SCRATCH_SIZE-10) == PROM_ERROR)
continue;
prom_printf("found display : %s, opening ... ", path);
ih = call_prom("open", 1, 1, path);
- if (ih == (ihandle)0 || ih == (ihandle)-1) {
+ if (ih == 0) {
prom_printf("failed\n");
continue;
}
@@ -1514,6 +1528,12 @@
return 0;
}
+/*
+ * The Open Firmware 1275 specification states properties must be 31 bytes or
+ * less, however not all firmwares obey this. Make it 64 bytes to be safe.
+ */
+#define MAX_PROPERTY_NAME 64
+
static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start,
unsigned long *mem_end)
{
@@ -1527,10 +1547,12 @@
/* get and store all property names */
prev_name = RELOC("");
for (;;) {
-
- /* 32 is max len of name including nul. */
- namep = make_room(mem_start, mem_end, 32, 1);
- if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0) {
+ int rc;
+
+ /* 64 is max len of name including nul. */
+ namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1);
+ rc = call_prom("nextprop", 3, 1, node, prev_name, namep);
+ if (rc != 1) {
/* No more nodes: unwind alloc */
*mem_start = (unsigned long)namep;
break;
@@ -1555,12 +1577,6 @@
}
}
-/*
- * The Open Firmware 1275 specification states properties must be 31 bytes or
- * less, however not all firmwares obey this. Make it 64 bytes to be safe.
- */
-#define MAX_PROPERTY_NAME 64
-
static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
unsigned long *mem_end)
{
@@ -1607,7 +1623,10 @@
prev_name = RELOC("");
sstart = (char *)RELOC(dt_string_start);
for (;;) {
- if (call_prom("nextprop", 3, 1, node, prev_name, pname) <= 0)
+ int rc;
+
+ rc = call_prom("nextprop", 3, 1, node, prev_name, pname);
+ if (rc != 1)
break;
/* find string offset */
@@ -1623,7 +1642,7 @@
l = call_prom("getproplen", 2, 1, node, pname);
/* sanity checks */
- if (l < 0)
+ if (l == PROM_ERROR)
continue;
if (l > MAX_PROPERTY_LENGTH) {
prom_printf("WARNING: ignoring large property ");
@@ -1771,17 +1790,18 @@
/* Some G5s have a missing interrupt definition, fix it up here */
u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000"));
- if ((long)u3 <= 0)
+ if (!PHANDLE_VALID(u3))
return;
i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000"));
- if ((long)i2c <= 0)
+ if (!PHANDLE_VALID(i2c))
return;
mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000"));
- if ((long)mpic <= 0)
+ if (!PHANDLE_VALID(mpic))
return;
/* check if proper rev of u3 */
- if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) <= 0)
+ if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev))
+ == PROM_ERROR)
return;
if (u3_rev != 0x35)
return;
diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c
index 21c57f5..dce198d 100644
--- a/arch/ppc64/kernel/setup.c
+++ b/arch/ppc64/kernel/setup.c
@@ -103,11 +103,6 @@
extern void smp_release_cpus(void);
-unsigned long decr_overclock = 1;
-unsigned long decr_overclock_proc0 = 1;
-unsigned long decr_overclock_set = 0;
-unsigned long decr_overclock_proc0_set = 0;
-
int have_of = 1;
int boot_cpuid = 0;
int boot_cpuid_phys = 0;
@@ -1120,64 +1115,15 @@
printk("[dump]%04x %s\n", src, msg);
}
-int set_spread_lpevents( char * str )
-{
- /* The parameter is the number of processors to share in processing lp events */
- unsigned long i;
- unsigned long val = simple_strtoul( str, NULL, 0 );
- if ( ( val > 0 ) && ( val <= NR_CPUS ) ) {
- for ( i=1; i<val; ++i )
- paca[i].lpqueue_ptr = paca[0].lpqueue_ptr;
- printk("lpevent processing spread over %ld processors\n", val);
- }
- else
- printk("invalid spreaqd_lpevents %ld\n", val);
- return 1;
-}
-
/* This should only be called on processor 0 during calibrate decr */
void setup_default_decr(void)
{
struct paca_struct *lpaca = get_paca();
- if ( decr_overclock_set && !decr_overclock_proc0_set )
- decr_overclock_proc0 = decr_overclock;
-
- lpaca->default_decr = tb_ticks_per_jiffy / decr_overclock_proc0;
+ lpaca->default_decr = tb_ticks_per_jiffy;
lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy;
}
-int set_decr_overclock_proc0( char * str )
-{
- unsigned long val = simple_strtoul( str, NULL, 0 );
- if ( ( val >= 1 ) && ( val <= 48 ) ) {
- decr_overclock_proc0_set = 1;
- decr_overclock_proc0 = val;
- printk("proc 0 decrementer overclock factor of %ld\n", val);
- }
- else
- printk("invalid proc 0 decrementer overclock factor of %ld\n", val);
- return 1;
-}
-
-int set_decr_overclock( char * str )
-{
- unsigned long val = simple_strtoul( str, NULL, 0 );
- if ( ( val >= 1 ) && ( val <= 48 ) ) {
- decr_overclock_set = 1;
- decr_overclock = val;
- printk("decrementer overclock factor of %ld\n", val);
- }
- else
- printk("invalid decrementer overclock factor of %ld\n", val);
- return 1;
-
-}
-
-__setup("spread_lpevents=", set_spread_lpevents );
-__setup("decr_overclock_proc0=", set_decr_overclock_proc0 );
-__setup("decr_overclock=", set_decr_overclock );
-
#ifndef CONFIG_PPC_ISERIES
/*
* This function can be used by platforms to "find" legacy serial ports.
diff --git a/arch/ppc64/kernel/smp.c b/arch/ppc64/kernel/smp.c
index 3b906cd..9ef5d36 100644
--- a/arch/ppc64/kernel/smp.c
+++ b/arch/ppc64/kernel/smp.c
@@ -334,7 +334,6 @@
}
}
-extern unsigned long decr_overclock;
extern struct gettimeofday_struct do_gtod;
struct thread_info *current_set[NR_CPUS];
@@ -491,7 +490,7 @@
if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))
return -EINVAL;
- paca[cpu].default_decr = tb_ticks_per_jiffy / decr_overclock;
+ paca[cpu].default_decr = tb_ticks_per_jiffy;
if (!cpu_has_feature(CPU_FTR_SLB)) {
void *tmp;
diff --git a/arch/ppc64/kernel/sys_ppc32.c b/arch/ppc64/kernel/sys_ppc32.c
index 7cf7a96..9c8e317 100644
--- a/arch/ppc64/kernel/sys_ppc32.c
+++ b/arch/ppc64/kernel/sys_ppc32.c
@@ -791,31 +791,6 @@
}
-asmlinkage int ppc64_newuname(struct new_utsname __user * name)
-{
- int errno = sys_newuname(name);
-
- if (current->personality == PER_LINUX32 && !errno) {
- if(copy_to_user(name->machine, "ppc\0\0", 8)) {
- errno = -EFAULT;
- }
- }
- return errno;
-}
-
-asmlinkage int ppc64_personality(unsigned long personality)
-{
- int ret;
- if (current->personality == PER_LINUX32 && personality == PER_LINUX)
- personality = PER_LINUX32;
- ret = sys_personality(personality);
- if (ret == PER_LINUX32)
- ret = PER_LINUX;
- return ret;
-}
-
-
-
/* Note: it is necessary to treat mode as an unsigned int,
* with the corresponding cast to a signed int to insure that the
* proper conversion (sign extension) between the register representation of a signed int (msr in 32-bit mode)
@@ -1158,26 +1133,47 @@
}
#endif
+asmlinkage int sys32_uname(struct old_utsname __user * name)
+{
+ int err = 0;
+
+ down_read(&uts_sem);
+ if (copy_to_user(name, &system_utsname, sizeof(*name)))
+ err = -EFAULT;
+ up_read(&uts_sem);
+ if (!err && personality(current->personality) == PER_LINUX32) {
+ /* change "ppc64" to "ppc" */
+ if (__put_user(0, name->machine + 3)
+ || __put_user(0, name->machine + 4))
+ err = -EFAULT;
+ }
+ return err;
+}
+
asmlinkage int sys32_olduname(struct oldold_utsname __user * name)
{
int error;
-
- if (!name)
- return -EFAULT;
+
if (!access_ok(VERIFY_WRITE,name,sizeof(struct oldold_utsname)))
return -EFAULT;
down_read(&uts_sem);
error = __copy_to_user(&name->sysname,&system_utsname.sysname,__OLD_UTS_LEN);
- error -= __put_user(0,name->sysname+__OLD_UTS_LEN);
- error -= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN);
- error -= __put_user(0,name->nodename+__OLD_UTS_LEN);
- error -= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN);
- error -= __put_user(0,name->release+__OLD_UTS_LEN);
- error -= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN);
- error -= __put_user(0,name->version+__OLD_UTS_LEN);
- error -= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN);
- error = __put_user(0,name->machine+__OLD_UTS_LEN);
+ error |= __put_user(0,name->sysname+__OLD_UTS_LEN);
+ error |= __copy_to_user(&name->nodename,&system_utsname.nodename,__OLD_UTS_LEN);
+ error |= __put_user(0,name->nodename+__OLD_UTS_LEN);
+ error |= __copy_to_user(&name->release,&system_utsname.release,__OLD_UTS_LEN);
+ error |= __put_user(0,name->release+__OLD_UTS_LEN);
+ error |= __copy_to_user(&name->version,&system_utsname.version,__OLD_UTS_LEN);
+ error |= __put_user(0,name->version+__OLD_UTS_LEN);
+ error |= __copy_to_user(&name->machine,&system_utsname.machine,__OLD_UTS_LEN);
+ error |= __put_user(0,name->machine+__OLD_UTS_LEN);
+ if (personality(current->personality) == PER_LINUX32) {
+ /* change "ppc64" to "ppc" */
+ error |= __put_user(0, name->machine + 3);
+ error |= __put_user(0, name->machine + 4);
+ }
+
up_read(&uts_sem);
error = error ? -EFAULT : 0;
diff --git a/arch/ppc64/kernel/syscalls.c b/arch/ppc64/kernel/syscalls.c
index f2865ff..a8cbb20 100644
--- a/arch/ppc64/kernel/syscalls.c
+++ b/arch/ppc64/kernel/syscalls.c
@@ -199,24 +199,33 @@
return ret;
}
-static int __init set_fakeppc(char *str)
+long ppc64_personality(unsigned long personality)
{
- if (*str)
- return 0;
- init_task.personality = PER_LINUX32;
- return 1;
-}
-__setup("fakeppc", set_fakeppc);
+ long ret;
-asmlinkage int sys_uname(struct old_utsname __user * name)
+ if (personality(current->personality) == PER_LINUX32
+ && personality == PER_LINUX)
+ personality = PER_LINUX32;
+ ret = sys_personality(personality);
+ if (ret == PER_LINUX32)
+ ret = PER_LINUX;
+ return ret;
+}
+
+long ppc64_newuname(struct new_utsname __user * name)
{
- int err = -EFAULT;
-
+ int err = 0;
+
down_read(&uts_sem);
- if (name && !copy_to_user(name, &system_utsname, sizeof (*name)))
- err = 0;
+ if (copy_to_user(name, &system_utsname, sizeof(*name)))
+ err = -EFAULT;
up_read(&uts_sem);
-
+ if (!err && personality(current->personality) == PER_LINUX32) {
+ /* change ppc64 to ppc */
+ if (__put_user(0, name->machine + 3)
+ || __put_user(0, name->machine + 4))
+ err = -EFAULT;
+ }
return err;
}
diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c
index 0925694..c8fa656 100644
--- a/arch/ppc64/kernel/sysfs.c
+++ b/arch/ppc64/kernel/sysfs.c
@@ -113,7 +113,6 @@
#ifdef CONFIG_PPC_PSERIES
unsigned long set, reset;
int ret;
- unsigned int ctrl;
#endif /* CONFIG_PPC_PSERIES */
/* Only need to enable them once */
@@ -167,11 +166,8 @@
* On SMT machines we have to set the run latch in the ctrl register
* in order to make PMC6 spin.
*/
- if (cpu_has_feature(CPU_FTR_SMT)) {
- ctrl = mfspr(CTRLF);
- ctrl |= RUNLATCH;
- mtspr(CTRLT, ctrl);
- }
+ if (cpu_has_feature(CPU_FTR_SMT))
+ ppc64_runlatch_on();
#endif /* CONFIG_PPC_PSERIES */
}
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 01ae196..c067435 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -28,6 +28,7 @@
//#include <linux/kernel_stat.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
+#include <linux/workqueue.h>
#include "appldata.h"
@@ -133,9 +134,12 @@
static int appldata_timer_active;
/*
- * Tasklet
+ * Work queue
*/
-static struct tasklet_struct appldata_tasklet_struct;
+static struct workqueue_struct *appldata_wq;
+static void appldata_work_fn(void *data);
+static DECLARE_WORK(appldata_work, appldata_work_fn, NULL);
+
/*
* Ops list
@@ -144,11 +148,11 @@
static LIST_HEAD(appldata_ops_list);
-/************************* timer, tasklet, DIAG ******************************/
+/*************************** timer, work, DIAG *******************************/
/*
* appldata_timer_function()
*
- * schedule tasklet and reschedule timer
+ * schedule work and reschedule timer
*/
static void appldata_timer_function(unsigned long data, struct pt_regs *regs)
{
@@ -157,22 +161,22 @@
atomic_read(&appldata_expire_count));
if (atomic_dec_and_test(&appldata_expire_count)) {
atomic_set(&appldata_expire_count, num_online_cpus());
- tasklet_schedule((struct tasklet_struct *) data);
+ queue_work(appldata_wq, (struct work_struct *) data);
}
}
/*
- * appldata_tasklet_function()
+ * appldata_work_fn()
*
* call data gathering function for each (active) module
*/
-static void appldata_tasklet_function(unsigned long data)
+static void appldata_work_fn(void *data)
{
struct list_head *lh;
struct appldata_ops *ops;
int i;
- P_DEBUG(" -= Tasklet =-\n");
+ P_DEBUG(" -= Work Queue =-\n");
i = 0;
spin_lock(&appldata_ops_lock);
list_for_each(lh, &appldata_ops_list) {
@@ -231,7 +235,7 @@
: "=d" (ry) : "d" (&(appldata_parameter_list)) : "cc");
return (int) ry;
}
-/********************** timer, tasklet, DIAG <END> ***************************/
+/************************ timer, work, DIAG <END> ****************************/
/****************************** /proc stuff **********************************/
@@ -411,7 +415,7 @@
struct list_head *lh;
found = 0;
- spin_lock_bh(&appldata_ops_lock);
+ spin_lock(&appldata_ops_lock);
list_for_each(lh, &appldata_ops_list) {
tmp_ops = list_entry(lh, struct appldata_ops, list);
if (&tmp_ops->ctl_table[2] == ctl) {
@@ -419,15 +423,15 @@
}
}
if (!found) {
- spin_unlock_bh(&appldata_ops_lock);
+ spin_unlock(&appldata_ops_lock);
return -ENODEV;
}
ops = ctl->data;
if (!try_module_get(ops->owner)) { // protect this function
- spin_unlock_bh(&appldata_ops_lock);
+ spin_unlock(&appldata_ops_lock);
return -ENODEV;
}
- spin_unlock_bh(&appldata_ops_lock);
+ spin_unlock(&appldata_ops_lock);
if (!*lenp || *ppos) {
*lenp = 0;
@@ -451,10 +455,11 @@
return -EFAULT;
}
- spin_lock_bh(&appldata_ops_lock);
+ spin_lock(&appldata_ops_lock);
if ((buf[0] == '1') && (ops->active == 0)) {
- if (!try_module_get(ops->owner)) { // protect tasklet
- spin_unlock_bh(&appldata_ops_lock);
+ // protect work queue callback
+ if (!try_module_get(ops->owner)) {
+ spin_unlock(&appldata_ops_lock);
module_put(ops->owner);
return -ENODEV;
}
@@ -485,7 +490,7 @@
}
module_put(ops->owner);
}
- spin_unlock_bh(&appldata_ops_lock);
+ spin_unlock(&appldata_ops_lock);
out:
*lenp = len;
*ppos += len;
@@ -529,7 +534,7 @@
}
memset(ops->ctl_table, 0, 4*sizeof(struct ctl_table));
- spin_lock_bh(&appldata_ops_lock);
+ spin_lock(&appldata_ops_lock);
list_for_each(lh, &appldata_ops_list) {
tmp_ops = list_entry(lh, struct appldata_ops, list);
P_DEBUG("register_ops loop: %i) name = %s, ctl = %i\n",
@@ -541,18 +546,18 @@
APPLDATA_PROC_NAME_LENGTH) == 0) {
P_ERROR("Name \"%s\" already registered!\n", ops->name);
kfree(ops->ctl_table);
- spin_unlock_bh(&appldata_ops_lock);
+ spin_unlock(&appldata_ops_lock);
return -EBUSY;
}
if (tmp_ops->ctl_nr == ops->ctl_nr) {
P_ERROR("ctl_nr %i already registered!\n", ops->ctl_nr);
kfree(ops->ctl_table);
- spin_unlock_bh(&appldata_ops_lock);
+ spin_unlock(&appldata_ops_lock);
return -EBUSY;
}
}
list_add(&ops->list, &appldata_ops_list);
- spin_unlock_bh(&appldata_ops_lock);
+ spin_unlock(&appldata_ops_lock);
ops->ctl_table[0].ctl_name = CTL_APPLDATA;
ops->ctl_table[0].procname = appldata_proc_name;
@@ -583,12 +588,12 @@
*/
void appldata_unregister_ops(struct appldata_ops *ops)
{
- spin_lock_bh(&appldata_ops_lock);
+ spin_lock(&appldata_ops_lock);
unregister_sysctl_table(ops->sysctl_header);
list_del(&ops->list);
kfree(ops->ctl_table);
ops->ctl_table = NULL;
- spin_unlock_bh(&appldata_ops_lock);
+ spin_unlock(&appldata_ops_lock);
P_INFO("%s-ops unregistered!\n", ops->name);
}
/********************** module-ops management <END> **************************/
@@ -602,7 +607,7 @@
init_virt_timer(&per_cpu(appldata_timer, cpu));
per_cpu(appldata_timer, cpu).function = appldata_timer_function;
per_cpu(appldata_timer, cpu).data = (unsigned long)
- &appldata_tasklet_struct;
+ &appldata_work;
atomic_inc(&appldata_expire_count);
spin_lock(&appldata_timer_lock);
__appldata_vtimer_setup(APPLDATA_MOD_TIMER);
@@ -615,7 +620,7 @@
del_virt_timer(&per_cpu(appldata_timer, cpu));
if (atomic_dec_and_test(&appldata_expire_count)) {
atomic_set(&appldata_expire_count, num_online_cpus());
- tasklet_schedule(&appldata_tasklet_struct);
+ queue_work(appldata_wq, &appldata_work);
}
spin_lock(&appldata_timer_lock);
__appldata_vtimer_setup(APPLDATA_MOD_TIMER);
@@ -648,7 +653,7 @@
/*
* appldata_init()
*
- * init timer and tasklet, register /proc entries
+ * init timer, register /proc entries
*/
static int __init appldata_init(void)
{
@@ -657,6 +662,12 @@
P_DEBUG("sizeof(parameter_list) = %lu\n",
sizeof(struct appldata_parameter_list));
+ appldata_wq = create_singlethread_workqueue("appldata");
+ if (!appldata_wq) {
+ P_ERROR("Could not create work queue\n");
+ return -ENOMEM;
+ }
+
for_each_online_cpu(i)
appldata_online_cpu(i);
@@ -670,7 +681,6 @@
appldata_table[1].de->owner = THIS_MODULE;
#endif
- tasklet_init(&appldata_tasklet_struct, appldata_tasklet_function, 0);
P_DEBUG("Base interface initialized.\n");
return 0;
}
@@ -678,7 +688,7 @@
/*
* appldata_exit()
*
- * stop timer and tasklet, unregister /proc entries
+ * stop timer, unregister /proc entries
*/
static void __exit appldata_exit(void)
{
@@ -690,7 +700,7 @@
/*
* ops list should be empty, but just in case something went wrong...
*/
- spin_lock_bh(&appldata_ops_lock);
+ spin_lock(&appldata_ops_lock);
list_for_each(lh, &appldata_ops_list) {
ops = list_entry(lh, struct appldata_ops, list);
rc = appldata_diag(ops->record_nr, APPLDATA_STOP_REC,
@@ -700,7 +710,7 @@
"return code: %d\n", ops->name, rc);
}
}
- spin_unlock_bh(&appldata_ops_lock);
+ spin_unlock(&appldata_ops_lock);
for_each_online_cpu(i)
appldata_offline_cpu(i);
@@ -709,7 +719,7 @@
unregister_sysctl_table(appldata_sysctl_header);
- tasklet_kill(&appldata_tasklet_struct);
+ destroy_workqueue(appldata_wq);
P_DEBUG("... module unloaded!\n");
}
/**************************** init / exit <END> ******************************/
diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c
index 462ee9a..f0e2fbe 100644
--- a/arch/s390/appldata/appldata_mem.c
+++ b/arch/s390/appldata/appldata_mem.c
@@ -68,7 +68,7 @@
u64 pgmajfault; /* page faults (major only) */
// <-- New in 2.6
-} appldata_mem_data;
+} __attribute__((packed)) appldata_mem_data;
static inline void appldata_debug_print(struct appldata_mem_data *mem_data)
diff --git a/arch/s390/appldata/appldata_net_sum.c b/arch/s390/appldata/appldata_net_sum.c
index dd61638..2a4c743 100644
--- a/arch/s390/appldata/appldata_net_sum.c
+++ b/arch/s390/appldata/appldata_net_sum.c
@@ -57,7 +57,7 @@
u64 rx_dropped; /* no space in linux buffers */
u64 tx_dropped; /* no space available in linux */
u64 collisions; /* collisions while transmitting */
-} appldata_net_sum_data;
+} __attribute__((packed)) appldata_net_sum_data;
static inline void appldata_print_debug(struct appldata_net_sum_data *net_data)
diff --git a/arch/s390/appldata/appldata_os.c b/arch/s390/appldata/appldata_os.c
index b83f074..e0a476b 100644
--- a/arch/s390/appldata/appldata_os.c
+++ b/arch/s390/appldata/appldata_os.c
@@ -49,7 +49,7 @@
u32 per_cpu_softirq; /* ... spent in softirqs */
u32 per_cpu_iowait; /* ... spent while waiting for I/O */
// <-- New in 2.6
-};
+} __attribute__((packed));
struct appldata_os_data {
u64 timestamp;
@@ -75,7 +75,7 @@
/* per cpu data */
struct appldata_os_per_cpu os_cpu[0];
-};
+} __attribute__((packed));
static struct appldata_os_data *appldata_os_data;
diff --git a/arch/s390/kernel/ptrace.c b/arch/s390/kernel/ptrace.c
index 2688936..06afa31 100644
--- a/arch/s390/kernel/ptrace.c
+++ b/arch/s390/kernel/ptrace.c
@@ -40,6 +40,7 @@
#include <asm/pgalloc.h>
#include <asm/system.h>
#include <asm/uaccess.h>
+#include <asm/unistd.h>
#ifdef CONFIG_S390_SUPPORT
#include "compat_ptrace.h"
@@ -130,13 +131,19 @@
peek_user(struct task_struct *child, addr_t addr, addr_t data)
{
struct user *dummy = NULL;
- addr_t offset, tmp;
+ addr_t offset, tmp, mask;
/*
* Stupid gdb peeks/pokes the access registers in 64 bit with
* an alignment of 4. Programmers from hell...
*/
- if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK)
+ mask = __ADDR_MASK;
+#ifdef CONFIG_ARCH_S390X
+ if (addr >= (addr_t) &dummy->regs.acrs &&
+ addr < (addr_t) &dummy->regs.orig_gpr2)
+ mask = 3;
+#endif
+ if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK)
return -EIO;
if (addr < (addr_t) &dummy->regs.acrs) {
@@ -153,6 +160,16 @@
* access registers are stored in the thread structure
*/
offset = addr - (addr_t) &dummy->regs.acrs;
+#ifdef CONFIG_ARCH_S390X
+ /*
+ * Very special case: old & broken 64 bit gdb reading
+ * from acrs[15]. Result is a 64 bit value. Read the
+ * 32 bit acrs[15] value and shift it by 32. Sick...
+ */
+ if (addr == (addr_t) &dummy->regs.acrs[15])
+ tmp = ((unsigned long) child->thread.acrs[15]) << 32;
+ else
+#endif
tmp = *(addr_t *)((addr_t) &child->thread.acrs + offset);
} else if (addr == (addr_t) &dummy->regs.orig_gpr2) {
@@ -167,6 +184,9 @@
*/
offset = addr - (addr_t) &dummy->regs.fp_regs;
tmp = *(addr_t *)((addr_t) &child->thread.fp_regs + offset);
+ if (addr == (addr_t) &dummy->regs.fp_regs.fpc)
+ tmp &= (unsigned long) FPC_VALID_MASK
+ << (BITS_PER_LONG - 32);
} else if (addr < (addr_t) (&dummy->regs.per_info + 1)) {
/*
@@ -191,13 +211,19 @@
poke_user(struct task_struct *child, addr_t addr, addr_t data)
{
struct user *dummy = NULL;
- addr_t offset;
+ addr_t offset, mask;
/*
* Stupid gdb peeks/pokes the access registers in 64 bit with
* an alignment of 4. Programmers from hell indeed...
*/
- if ((addr & 3) || addr > sizeof(struct user) - __ADDR_MASK)
+ mask = __ADDR_MASK;
+#ifdef CONFIG_ARCH_S390X
+ if (addr >= (addr_t) &dummy->regs.acrs &&
+ addr < (addr_t) &dummy->regs.orig_gpr2)
+ mask = 3;
+#endif
+ if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK)
return -EIO;
if (addr < (addr_t) &dummy->regs.acrs) {
@@ -224,6 +250,17 @@
* access registers are stored in the thread structure
*/
offset = addr - (addr_t) &dummy->regs.acrs;
+#ifdef CONFIG_ARCH_S390X
+ /*
+ * Very special case: old & broken 64 bit gdb writing
+ * to acrs[15] with a 64 bit value. Ignore the lower
+ * half of the value and write the upper 32 bit to
+ * acrs[15]. Sick...
+ */
+ if (addr == (addr_t) &dummy->regs.acrs[15])
+ child->thread.acrs[15] = (unsigned int) (data >> 32);
+ else
+#endif
*(addr_t *)((addr_t) &child->thread.acrs + offset) = data;
} else if (addr == (addr_t) &dummy->regs.orig_gpr2) {
@@ -237,7 +274,8 @@
* floating point regs. are stored in the thread structure
*/
if (addr == (addr_t) &dummy->regs.fp_regs.fpc &&
- (data & ~FPC_VALID_MASK) != 0)
+ (data & ~((unsigned long) FPC_VALID_MASK
+ << (BITS_PER_LONG - 32))) != 0)
return -EINVAL;
offset = addr - (addr_t) &dummy->regs.fp_regs;
*(addr_t *)((addr_t) &child->thread.fp_regs + offset) = data;
@@ -723,6 +761,13 @@
? 0x80 : 0));
/*
+ * If the debuffer has set an invalid system call number,
+ * we prepare to skip the system call restart handling.
+ */
+ if (!entryexit && regs->gprs[2] >= NR_syscalls)
+ regs->trap = -1;
+
+ /*
* this isn't the same as continuing with a signal, but it will do
* for normal use. strace only continues with a signal if the
* stopping signal is not SIGTRAP. -brl
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 80306bc..75fde94 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -207,7 +207,7 @@
* we are not in an interrupt and that there is a
* user context.
*/
- if (user_address == 0 || in_interrupt() || !mm)
+ if (user_address == 0 || in_atomic() || !mm)
goto no_context;
/*
diff --git a/arch/um/Kconfig_char b/arch/um/Kconfig_char
index 3e50fdb..62d87b7 100644
--- a/arch/um/Kconfig_char
+++ b/arch/um/Kconfig_char
@@ -204,5 +204,11 @@
http://sourceforge.net/projects/gkernel/). rngd periodically reads
/dev/hwrng and injects the entropy into /dev/random.
+config MMAPPER
+ tristate "iomem emulation driver"
+ help
+ This driver allows a host file to be used as emulated IO memory inside
+ UML.
+
endmenu
diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile
index 323f72c..b2de991 100644
--- a/arch/um/drivers/Makefile
+++ b/arch/um/drivers/Makefile
@@ -22,8 +22,8 @@
obj-$(CONFIG_SSL) += ssl.o
obj-$(CONFIG_STDERR_CONSOLE) += stderr_console.o
-obj-$(CONFIG_UML_NET_SLIP) += slip.o
-obj-$(CONFIG_UML_NET_SLIRP) += slirp.o
+obj-$(CONFIG_UML_NET_SLIP) += slip.o slip_common.o
+obj-$(CONFIG_UML_NET_SLIRP) += slirp.o slip_common.o
obj-$(CONFIG_UML_NET_DAEMON) += daemon.o
obj-$(CONFIG_UML_NET_MCAST) += mcast.o
#obj-$(CONFIG_UML_NET_PCAP) += pcap.o $(PCAP)
@@ -41,6 +41,6 @@
obj-$(CONFIG_BLK_DEV_COW_COMMON) += cow_user.o
obj-$(CONFIG_UML_RANDOM) += random.o
-USER_OBJS := fd.o null.o pty.o tty.o xterm.o
+USER_OBJS := fd.o null.o pty.o tty.o xterm.o slip_common.o
include arch/um/scripts/Makefile.rules
diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c
index 583b8e1..5d37681 100644
--- a/arch/um/drivers/chan_user.c
+++ b/arch/um/drivers/chan_user.c
@@ -143,22 +143,22 @@
{
struct winch_data data;
unsigned long stack;
- int fds[2], pid, n, err;
+ int fds[2], n, err;
char c;
err = os_pipe(fds, 1, 1);
if(err < 0){
printk("winch_tramp : os_pipe failed, err = %d\n", -err);
- return(err);
+ goto out;
}
data = ((struct winch_data) { .pty_fd = fd,
.pipe_fd = fds[1],
.close_me = fds[0] } );
- pid = run_helper_thread(winch_thread, &data, 0, &stack, 0);
- if(pid < 0){
+ err = run_helper_thread(winch_thread, &data, 0, &stack, 0);
+ if(err < 0){
printk("fork of winch_thread failed - errno = %d\n", errno);
- return(pid);
+ goto out_close;
}
os_close_file(fds[1]);
@@ -168,14 +168,22 @@
printk("winch_tramp : failed to read synchronization byte\n");
printk("read failed, err = %d\n", -n);
printk("fd %d will not support SIGWINCH\n", fd);
- *fd_out = -1;
+ err = -EINVAL;
+ goto out_close1;
}
- return(pid);
+ return err ;
+
+ out_close:
+ os_close_file(fds[1]);
+ out_close1:
+ os_close_file(fds[0]);
+ out:
+ return err;
}
void register_winch(int fd, struct tty_struct *tty)
{
- int pid, thread, thread_fd;
+ int pid, thread, thread_fd = -1;
int count;
char c = 1;
@@ -186,7 +194,7 @@
if(!CHOOSE_MODE_PROC(is_tracer_winch, is_skas_winch, pid, fd,
tty) && (pid == -1)){
thread = winch_tramp(fd, tty, &thread_fd);
- if(fd != -1){
+ if(thread > 0){
register_winch_irq(thread_fd, fd, thread, tty);
count = os_write_file(thread_fd, &c, sizeof(c));
diff --git a/arch/um/drivers/mmapper_kern.c b/arch/um/drivers/mmapper_kern.c
index a63231d..a37a5ac 100644
--- a/arch/um/drivers/mmapper_kern.c
+++ b/arch/um/drivers/mmapper_kern.c
@@ -18,6 +18,7 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/smp_lock.h>
+#include <linux/miscdevice.h>
#include <asm/uaccess.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
@@ -117,24 +118,39 @@
.release = mmapper_release,
};
+static struct miscdevice mmapper_dev = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "mmapper",
+ .fops = &mmapper_fops
+};
+
static int __init mmapper_init(void)
{
+ int err;
+
printk(KERN_INFO "Mapper v0.1\n");
v_buf = (char *) find_iomem("mmapper", &mmapper_size);
if(mmapper_size == 0){
printk(KERN_ERR "mmapper_init - find_iomem failed\n");
- return(0);
+ goto out;
+ }
+
+ err = misc_register(&mmapper_dev);
+ if(err){
+ printk(KERN_ERR "mmapper - misc_register failed, err = %d\n",
+ err);
+ goto out;
}
p_buf = __pa(v_buf);
-
- devfs_mk_cdev(MKDEV(30, 0), S_IFCHR|S_IRUGO|S_IWUGO, "mmapper");
- return(0);
+out:
+ return 0;
}
static void mmapper_exit(void)
{
+ misc_deregister(&mmapper_dev);
}
module_init(mmapper_init);
diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c
index 47229fe..3730d4f 100644
--- a/arch/um/drivers/net_user.c
+++ b/arch/um/drivers/net_user.c
@@ -32,7 +32,7 @@
return(0);
}
-void tap_check_ips(char *gate_addr, char *eth_addr)
+void tap_check_ips(char *gate_addr, unsigned char *eth_addr)
{
int tap_addr[4];
diff --git a/arch/um/drivers/slip.h b/arch/um/drivers/slip.h
index 495f2f1..bb0dab4 100644
--- a/arch/um/drivers/slip.h
+++ b/arch/um/drivers/slip.h
@@ -1,10 +1,7 @@
#ifndef __UM_SLIP_H
#define __UM_SLIP_H
-#define BUF_SIZE 1500
- /* two bytes each for a (pathological) max packet of escaped chars + *
- * terminating END char + initial END char */
-#define ENC_BUF_SIZE (2 * BUF_SIZE + 2)
+#include "slip_common.h"
struct slip_data {
void *dev;
@@ -12,28 +9,12 @@
char *addr;
char *gate_addr;
int slave;
- char ibuf[ENC_BUF_SIZE];
- char obuf[ENC_BUF_SIZE];
- int more; /* more data: do not read fd until ibuf has been drained */
- int pos;
- int esc;
+ struct slip_proto slip;
};
extern struct net_user_info slip_user_info;
-extern int set_umn_addr(int fd, char *addr, char *ptp_addr);
extern int slip_user_read(int fd, void *buf, int len, struct slip_data *pri);
extern int slip_user_write(int fd, void *buf, int len, struct slip_data *pri);
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/slip_common.c b/arch/um/drivers/slip_common.c
new file mode 100644
index 0000000..e89cfc6
--- /dev/null
+++ b/arch/um/drivers/slip_common.c
@@ -0,0 +1,54 @@
+#include <string.h>
+#include "slip_common.h"
+#include "net_user.h"
+
+int slip_proto_read(int fd, void *buf, int len, struct slip_proto *slip)
+{
+ int i, n, size, start;
+
+ if(slip->more > 0){
+ i = 0;
+ while(i < slip->more){
+ size = slip_unesc(slip->ibuf[i++], slip->ibuf,
+ &slip->pos, &slip->esc);
+ if(size){
+ memcpy(buf, slip->ibuf, size);
+ memmove(slip->ibuf, &slip->ibuf[i],
+ slip->more - i);
+ slip->more = slip->more - i;
+ return size;
+ }
+ }
+ slip->more = 0;
+ }
+
+ n = net_read(fd, &slip->ibuf[slip->pos],
+ sizeof(slip->ibuf) - slip->pos);
+ if(n <= 0)
+ return n;
+
+ start = slip->pos;
+ for(i = 0; i < n; i++){
+ size = slip_unesc(slip->ibuf[start + i], slip->ibuf,&slip->pos,
+ &slip->esc);
+ if(size){
+ memcpy(buf, slip->ibuf, size);
+ memmove(slip->ibuf, &slip->ibuf[start+i+1],
+ n - (i + 1));
+ slip->more = n - (i + 1);
+ return size;
+ }
+ }
+ return 0;
+}
+
+int slip_proto_write(int fd, void *buf, int len, struct slip_proto *slip)
+{
+ int actual, n;
+
+ actual = slip_esc(buf, slip->obuf, len);
+ n = net_write(fd, slip->obuf, actual);
+ if(n < 0)
+ return n;
+ else return len;
+}
diff --git a/arch/um/drivers/slip_proto.h b/arch/um/drivers/slip_common.h
similarity index 60%
rename from arch/um/drivers/slip_proto.h
rename to arch/um/drivers/slip_common.h
index 7206361..2ae76d8 100644
--- a/arch/um/drivers/slip_proto.h
+++ b/arch/um/drivers/slip_common.h
@@ -1,10 +1,10 @@
-/*
- * Copyright (C) 2002 Jeff Dike (jdike@karaya.com)
- * Licensed under the GPL
- */
+#ifndef __UM_SLIP_COMMON_H
+#define __UM_SLIP_COMMON_H
-#ifndef __UM_SLIP_PROTO_H__
-#define __UM_SLIP_PROTO_H__
+#define BUF_SIZE 1500
+ /* two bytes each for a (pathological) max packet of escaped chars + *
+ * terminating END char + initial END char */
+#define ENC_BUF_SIZE (2 * BUF_SIZE + 2)
/* SLIP protocol characters. */
#define SLIP_END 0300 /* indicates end of frame */
@@ -12,7 +12,8 @@
#define SLIP_ESC_END 0334 /* ESC ESC_END means END 'data' */
#define SLIP_ESC_ESC 0335 /* ESC ESC_ESC means ESC 'data' */
-static inline int slip_unesc(unsigned char c,char *buf,int *pos, int *esc)
+static inline int slip_unesc(unsigned char c, unsigned char *buf, int *pos,
+ int *esc)
{
int ret;
@@ -79,15 +80,25 @@
return (ptr - d);
}
-#endif
+struct slip_proto {
+ unsigned char ibuf[ENC_BUF_SIZE];
+ unsigned char obuf[ENC_BUF_SIZE];
+ int more; /* more data: do not read fd until ibuf has been drained */
+ int pos;
+ int esc;
+};
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
+#define SLIP_PROTO_INIT { \
+ .ibuf = { '\0' }, \
+ .obuf = { '\0' }, \
+ .more = 0, \
+ .pos = 0, \
+ .esc = 0 \
+}
+
+extern int slip_proto_read(int fd, void *buf, int len,
+ struct slip_proto *slip);
+extern int slip_proto_write(int fd, void *buf, int len,
+ struct slip_proto *slip);
+
+#endif
diff --git a/arch/um/drivers/slip_kern.c b/arch/um/drivers/slip_kern.c
index 0886eed..9a6f5c8 100644
--- a/arch/um/drivers/slip_kern.c
+++ b/arch/um/drivers/slip_kern.c
@@ -26,16 +26,16 @@
.addr = NULL,
.gate_addr = init->gate_addr,
.slave = -1,
- .ibuf = { '\0' },
- .obuf = { '\0' },
- .pos = 0,
- .esc = 0,
+ .slip = SLIP_PROTO_INIT,
.dev = dev });
dev->init = NULL;
+ dev->header_cache_update = NULL;
+ dev->hard_header_cache = NULL;
+ dev->hard_header = NULL;
dev->hard_header_len = 0;
- dev->addr_len = 4;
- dev->type = ARPHRD_ETHER;
+ dev->addr_len = 0;
+ dev->type = ARPHRD_SLIP;
dev->tx_queue_len = 256;
dev->flags = IFF_NOARP;
printk("SLIP backend - SLIP IP = %s\n", spri->gate_addr);
diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c
index d94846b..71af444 100644
--- a/arch/um/drivers/slip_user.c
+++ b/arch/um/drivers/slip_user.c
@@ -13,7 +13,7 @@
#include "user.h"
#include "net_user.h"
#include "slip.h"
-#include "slip_proto.h"
+#include "slip_common.h"
#include "helper.h"
#include "os.h"
@@ -77,41 +77,51 @@
err = os_pipe(fds, 1, 0);
if(err < 0){
printk("slip_tramp : pipe failed, err = %d\n", -err);
- return(err);
+ goto out;
}
err = 0;
pe_data.stdin = fd;
pe_data.stdout = fds[1];
pe_data.close_me = fds[0];
- pid = run_helper(slip_pre_exec, &pe_data, argv, NULL);
+ err = run_helper(slip_pre_exec, &pe_data, argv, NULL);
+ if(err < 0)
+ goto out_close;
+ pid = err;
- if(pid < 0) err = pid;
- else {
- output_len = page_size();
- output = um_kmalloc(output_len);
- if(output == NULL)
- printk("slip_tramp : failed to allocate output "
- "buffer\n");
-
- os_close_file(fds[1]);
- read_output(fds[0], output, output_len);
- if(output != NULL){
- printk("%s", output);
- kfree(output);
- }
- CATCH_EINTR(err = waitpid(pid, &status, 0));
- if(err < 0)
- err = errno;
- else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)){
- printk("'%s' didn't exit with status 0\n", argv[0]);
- err = -EINVAL;
- }
+ output_len = page_size();
+ output = um_kmalloc(output_len);
+ if(output == NULL){
+ printk("slip_tramp : failed to allocate output buffer\n");
+ os_kill_process(pid, 1);
+ err = -ENOMEM;
+ goto out_free;
}
+ os_close_file(fds[1]);
+ read_output(fds[0], output, output_len);
+ printk("%s", output);
+
+ CATCH_EINTR(err = waitpid(pid, &status, 0));
+ if(err < 0)
+ err = errno;
+ else if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)){
+ printk("'%s' didn't exit with status 0\n", argv[0]);
+ err = -EINVAL;
+ }
+ else err = 0;
+
os_close_file(fds[0]);
- return(err);
+out_free:
+ kfree(output);
+ return err;
+
+out_close:
+ os_close_file(fds[0]);
+ os_close_file(fds[1]);
+out:
+ return err;
}
static int slip_open(void *data)
@@ -123,21 +133,26 @@
NULL };
int sfd, mfd, err;
- mfd = get_pty();
- if(mfd < 0){
- printk("umn : Failed to open pty, err = %d\n", -mfd);
- return(mfd);
+ err = get_pty();
+ if(err < 0){
+ printk("slip-open : Failed to open pty, err = %d\n", -err);
+ goto out;
}
- sfd = os_open_file(ptsname(mfd), of_rdwr(OPENFLAGS()), 0);
- if(sfd < 0){
- printk("Couldn't open tty for slip line, err = %d\n", -sfd);
- os_close_file(mfd);
- return(sfd);
+ mfd = err;
+
+ err = os_open_file(ptsname(mfd), of_rdwr(OPENFLAGS()), 0);
+ if(err < 0){
+ printk("Couldn't open tty for slip line, err = %d\n", -err);
+ goto out_close;
}
- if(set_up_tty(sfd)) return(-1);
+ sfd = err;
+
+ if(set_up_tty(sfd))
+ goto out_close2;
+
pri->slave = sfd;
- pri->pos = 0;
- pri->esc = 0;
+ pri->slip.pos = 0;
+ pri->slip.esc = 0;
if(pri->gate_addr != NULL){
sprintf(version_buf, "%d", UML_NET_VERSION);
strcpy(gate_buf, pri->gate_addr);
@@ -146,12 +161,12 @@
if(err < 0){
printk("slip_tramp failed - err = %d\n", -err);
- return(err);
+ goto out_close2;
}
err = os_get_ifname(pri->slave, pri->name);
if(err < 0){
printk("get_ifname failed, err = %d\n", -err);
- return(err);
+ goto out_close2;
}
iter_addresses(pri->dev, open_addr, pri->name);
}
@@ -160,10 +175,16 @@
if(err < 0){
printk("Failed to set slip discipline encapsulation - "
"err = %d\n", -err);
- return(err);
+ goto out_close2;
}
}
return(mfd);
+out_close2:
+ os_close_file(sfd);
+out_close:
+ os_close_file(mfd);
+out:
+ return err;
}
static void slip_close(int fd, void *data)
@@ -190,48 +211,12 @@
int slip_user_read(int fd, void *buf, int len, struct slip_data *pri)
{
- int i, n, size, start;
-
- if(pri->more>0) {
- i = 0;
- while(i < pri->more) {
- size = slip_unesc(pri->ibuf[i++],
- pri->ibuf, &pri->pos, &pri->esc);
- if(size){
- memcpy(buf, pri->ibuf, size);
- memmove(pri->ibuf, &pri->ibuf[i], pri->more-i);
- pri->more=pri->more-i;
- return(size);
- }
- }
- pri->more=0;
- }
-
- n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos);
- if(n <= 0) return(n);
-
- start = pri->pos;
- for(i = 0; i < n; i++){
- size = slip_unesc(pri->ibuf[start + i],
- pri->ibuf, &pri->pos, &pri->esc);
- if(size){
- memcpy(buf, pri->ibuf, size);
- memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1));
- pri->more=n-(i+1);
- return(size);
- }
- }
- return(0);
+ return slip_proto_read(fd, buf, len, &pri->slip);
}
int slip_user_write(int fd, void *buf, int len, struct slip_data *pri)
{
- int actual, n;
-
- actual = slip_esc(buf, pri->obuf, len);
- n = net_write(fd, pri->obuf, actual);
- if(n < 0) return(n);
- else return(len);
+ return slip_proto_write(fd, buf, len, &pri->slip);
}
static int slip_set_mtu(int mtu, void *data)
@@ -267,14 +252,3 @@
.delete_address = slip_del_addr,
.max_packet = BUF_SIZE
};
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/slirp.h b/arch/um/drivers/slirp.h
index 04e407d..6cf88ab 100644
--- a/arch/um/drivers/slirp.h
+++ b/arch/um/drivers/slirp.h
@@ -1,10 +1,7 @@
#ifndef __UM_SLIRP_H
#define __UM_SLIRP_H
-#define BUF_SIZE 1500
- /* two bytes each for a (pathological) max packet of escaped chars + *
- * terminating END char + initial END char */
-#define ENC_BUF_SIZE (2 * BUF_SIZE + 2)
+#include "slip_common.h"
#define SLIRP_MAX_ARGS 100
/*
@@ -24,28 +21,13 @@
struct arg_list_dummy_wrapper argw;
int pid;
int slave;
- char ibuf[ENC_BUF_SIZE];
- char obuf[ENC_BUF_SIZE];
- int more; /* more data: do not read fd until ibuf has been drained */
- int pos;
- int esc;
+ struct slip_proto slip;
};
extern struct net_user_info slirp_user_info;
-extern int set_umn_addr(int fd, char *addr, char *ptp_addr);
extern int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri);
-extern int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri);
+extern int slirp_user_write(int fd, void *buf, int len,
+ struct slirp_data *pri);
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/slirp_kern.c b/arch/um/drivers/slirp_kern.c
index c9d6b52..9864d27 100644
--- a/arch/um/drivers/slirp_kern.c
+++ b/arch/um/drivers/slirp_kern.c
@@ -25,10 +25,7 @@
{ .argw = init->argw,
.pid = -1,
.slave = -1,
- .ibuf = { '\0' },
- .obuf = { '\0' },
- .pos = 0,
- .esc = 0,
+ .slip = SLIP_PROTO_INIT,
.dev = dev });
dev->init = NULL;
diff --git a/arch/um/drivers/slirp_user.c b/arch/um/drivers/slirp_user.c
index c322515..8d91f66 100644
--- a/arch/um/drivers/slirp_user.c
+++ b/arch/um/drivers/slirp_user.c
@@ -12,7 +12,7 @@
#include "user.h"
#include "net_user.h"
#include "slirp.h"
-#include "slip_proto.h"
+#include "slip_common.h"
#include "helper.h"
#include "os.h"
@@ -48,47 +48,32 @@
return(pid);
}
-/* XXX This is just a trivial wrapper around os_pipe */
-static int slirp_datachan(int *mfd, int *sfd)
-{
- int fds[2], err;
-
- err = os_pipe(fds, 1, 1);
- if(err < 0){
- printk("slirp_datachan: Failed to open pipe, err = %d\n", -err);
- return(err);
- }
-
- *mfd = fds[0];
- *sfd = fds[1];
- return(0);
-}
-
static int slirp_open(void *data)
{
struct slirp_data *pri = data;
- int sfd, mfd, pid, err;
+ int fds[2], pid, err;
- err = slirp_datachan(&mfd, &sfd);
+ err = os_pipe(fds, 1, 1);
if(err)
return(err);
- pid = slirp_tramp(pri->argw.argv, sfd);
-
- if(pid < 0){
- printk("slirp_tramp failed - errno = %d\n", -pid);
- os_close_file(sfd);
- os_close_file(mfd);
- return(pid);
+ err = slirp_tramp(pri->argw.argv, fds[1]);
+ if(err < 0){
+ printk("slirp_tramp failed - errno = %d\n", -err);
+ goto out;
}
+ pid = err;
- pri->slave = sfd;
- pri->pos = 0;
- pri->esc = 0;
+ pri->slave = fds[1];
+ pri->slip.pos = 0;
+ pri->slip.esc = 0;
+ pri->pid = err;
- pri->pid = pid;
-
- return(mfd);
+ return(fds[0]);
+out:
+ os_close_file(fds[0]);
+ os_close_file(fds[1]);
+ return err;
}
static void slirp_close(int fd, void *data)
@@ -129,48 +114,12 @@
int slirp_user_read(int fd, void *buf, int len, struct slirp_data *pri)
{
- int i, n, size, start;
-
- if(pri->more>0) {
- i = 0;
- while(i < pri->more) {
- size = slip_unesc(pri->ibuf[i++],
- pri->ibuf,&pri->pos,&pri->esc);
- if(size){
- memcpy(buf, pri->ibuf, size);
- memmove(pri->ibuf, &pri->ibuf[i], pri->more-i);
- pri->more=pri->more-i;
- return(size);
- }
- }
- pri->more=0;
- }
-
- n = net_read(fd, &pri->ibuf[pri->pos], sizeof(pri->ibuf) - pri->pos);
- if(n <= 0) return(n);
-
- start = pri->pos;
- for(i = 0; i < n; i++){
- size = slip_unesc(pri->ibuf[start + i],
- pri->ibuf,&pri->pos,&pri->esc);
- if(size){
- memcpy(buf, pri->ibuf, size);
- memmove(pri->ibuf, &pri->ibuf[start+i+1], n-(i+1));
- pri->more=n-(i+1);
- return(size);
- }
- }
- return(0);
+ return slip_proto_read(fd, buf, len, &pri->slip);
}
int slirp_user_write(int fd, void *buf, int len, struct slirp_data *pri)
{
- int actual, n;
-
- actual = slip_esc(buf, pri->obuf, len);
- n = net_write(fd, pri->obuf, actual);
- if(n < 0) return(n);
- else return(len);
+ return slip_proto_write(fd, buf, len, &pri->slip);
}
static int slirp_set_mtu(int mtu, void *data)
@@ -188,14 +137,3 @@
.delete_address = NULL,
.max_packet = BUF_SIZE
};
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/drivers/stderr_console.c b/arch/um/drivers/stderr_console.c
index 98565b5..429ae8e 100644
--- a/arch/um/drivers/stderr_console.c
+++ b/arch/um/drivers/stderr_console.c
@@ -22,9 +22,9 @@
}
static struct console stderr_console = {
- .name "stderr",
- .write stderr_console_write,
- .flags CON_PRINTBUFFER,
+ .name = "stderr",
+ .write = stderr_console_write,
+ .flags = CON_PRINTBUFFER,
};
static int __init stderr_console_init(void)
diff --git a/arch/um/include/mconsole.h b/arch/um/include/mconsole.h
index 9fbe308..cfa368e 100644
--- a/arch/um/include/mconsole.h
+++ b/arch/um/include/mconsole.h
@@ -56,7 +56,7 @@
int as_interrupt;
int originating_fd;
- int originlen;
+ unsigned int originlen;
unsigned char origin[128]; /* sockaddr_un */
struct mconsole_request request;
diff --git a/arch/um/include/net_user.h b/arch/um/include/net_user.h
index 36807b7..89885a7 100644
--- a/arch/um/include/net_user.h
+++ b/arch/um/include/net_user.h
@@ -35,7 +35,7 @@
extern void free_output_buffer(void *buffer);
extern int tap_open_common(void *dev, char *gate_addr);
-extern void tap_check_ips(char *gate_addr, char *eth_addr);
+extern void tap_check_ips(char *gate_addr, unsigned char *eth_addr);
extern void read_output(int fd, char *output_out, int len);
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index d246d5a..881d298 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -136,7 +136,7 @@
extern int os_open_file(char *file, struct openflags flags, int mode);
extern int os_read_file(int fd, void *buf, int len);
extern int os_write_file(int fd, const void *buf, int count);
-extern int os_file_size(char *file, long long *size_out);
+extern int os_file_size(char *file, unsigned long long *size_out);
extern int os_file_modtime(char *file, unsigned long *modtime);
extern int os_pipe(int *fd, int stream, int close_on_exec);
extern int os_set_fd_async(int fd, int owner);
diff --git a/arch/um/include/sysdep-i386/ptrace.h b/arch/um/include/sysdep-i386/ptrace.h
index 6eaeb99..c8ee955 100644
--- a/arch/um/include/sysdep-i386/ptrace.h
+++ b/arch/um/include/sysdep-i386/ptrace.h
@@ -8,6 +8,8 @@
#include "uml-config.h"
#include "user_constants.h"
+#include "sysdep/faultinfo.h"
+#include "choose-mode.h"
#define MAX_REG_NR (UM_FRAME_SIZE / sizeof(unsigned long))
#define MAX_REG_OFFSET (UM_FRAME_SIZE)
@@ -58,9 +60,6 @@
#define PTRACE_SYSEMU_SINGLESTEP 32
#endif
-#include "sysdep/faultinfo.h"
-#include "choose-mode.h"
-
union uml_pt_regs {
#ifdef UML_CONFIG_MODE_TT
struct tt_regs {
diff --git a/arch/um/include/user_util.h b/arch/um/include/user_util.h
index b8c5b8a..7b6a24d 100644
--- a/arch/um/include/user_util.h
+++ b/arch/um/include/user_util.h
@@ -41,9 +41,6 @@
extern char host_info[];
extern char saved_command_line[];
-extern char command_line[];
-
-extern char *tempdir;
extern unsigned long _stext, _etext, _sdata, _edata, __bss_start, _end;
extern unsigned long _unprotected_end;
diff --git a/arch/um/kernel/main.c b/arch/um/kernel/main.c
index e42e636..e59f581 100644
--- a/arch/um/kernel/main.c
+++ b/arch/um/kernel/main.c
@@ -24,8 +24,6 @@
#include "mode.h"
#include "choose-mode.h"
#include "uml-config.h"
-#include "irq_user.h"
-#include "time_user.h"
#include "os.h"
/* Set in set_stklim, which is called from main and __wrap_malloc.
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 51f8e5a..1b5ef3e 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -30,7 +30,6 @@
#include "init.h"
#include "os.h"
#include "uml-config.h"
-#include "ptrace_user.h"
#include "choose-mode.h"
#include "mode.h"
#ifdef UML_CONFIG_MODE_SKAS
@@ -131,7 +130,7 @@
return(arg.pid);
}
-static int ptrace_child(void *arg)
+static int ptrace_child(void)
{
int ret;
int pid = os_getpid(), ppid = getppid();
@@ -160,20 +159,16 @@
_exit(ret);
}
-static int start_ptraced_child(void **stack_out)
+static int start_ptraced_child(void)
{
- void *stack;
- unsigned long sp;
int pid, n, status;
- stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC,
- MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
- if(stack == MAP_FAILED)
- panic("check_ptrace : mmap failed, errno = %d", errno);
- sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *);
- pid = clone(ptrace_child, (void *) sp, SIGCHLD, NULL);
+ pid = fork();
+ if(pid == 0)
+ ptrace_child();
+
if(pid < 0)
- panic("check_ptrace : clone failed, errno = %d", errno);
+ panic("check_ptrace : fork failed, errno = %d", errno);
CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
if(n < 0)
panic("check_ptrace : wait failed, errno = %d", errno);
@@ -181,7 +176,6 @@
panic("check_ptrace : expected SIGSTOP, got status = %d",
status);
- *stack_out = stack;
return(pid);
}
@@ -189,12 +183,12 @@
* just avoid using sysemu, not panic, but only if SYSEMU features are broken.
* So only for SYSEMU features we test mustpanic, while normal host features
* must work anyway!*/
-static int stop_ptraced_child(int pid, void *stack, int exitcode, int mustpanic)
+static int stop_ptraced_child(int pid, int exitcode, int mustexit)
{
int status, n, ret = 0;
if(ptrace(PTRACE_CONT, pid, 0, 0) < 0)
- panic("check_ptrace : ptrace failed, errno = %d", errno);
+ panic("stop_ptraced_child : ptrace failed, errno = %d", errno);
CATCH_EINTR(n = waitpid(pid, &status, 0));
if(!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) {
int exit_with = WEXITSTATUS(status);
@@ -205,15 +199,13 @@
printk("check_ptrace : child exited with exitcode %d, while "
"expecting %d; status 0x%x", exit_with,
exitcode, status);
- if (mustpanic)
+ if (mustexit)
panic("\n");
else
printk("\n");
ret = -1;
}
- if(munmap(stack, PAGE_SIZE) < 0)
- panic("check_ptrace : munmap failed, errno = %d", errno);
return ret;
}
@@ -235,12 +227,11 @@
static void __init check_sysemu(void)
{
- void *stack;
int pid, syscall, n, status, count=0;
printk("Checking syscall emulation patch for ptrace...");
sysemu_supported = 0;
- pid = start_ptraced_child(&stack);
+ pid = start_ptraced_child();
if(ptrace(PTRACE_SYSEMU, pid, 0, 0) < 0)
goto fail;
@@ -258,7 +249,7 @@
panic("check_sysemu : failed to modify system "
"call return, errno = %d", errno);
- if (stop_ptraced_child(pid, stack, 0, 0) < 0)
+ if (stop_ptraced_child(pid, 0, 0) < 0)
goto fail_stopped;
sysemu_supported = 1;
@@ -266,7 +257,7 @@
set_using_sysemu(!force_sysemu_disabled);
printk("Checking advanced syscall emulation patch for ptrace...");
- pid = start_ptraced_child(&stack);
+ pid = start_ptraced_child();
while(1){
count++;
if(ptrace(PTRACE_SYSEMU_SINGLESTEP, pid, 0, 0) < 0)
@@ -291,7 +282,7 @@
break;
}
}
- if (stop_ptraced_child(pid, stack, 0, 0) < 0)
+ if (stop_ptraced_child(pid, 0, 0) < 0)
goto fail_stopped;
sysemu_supported = 2;
@@ -302,18 +293,17 @@
return;
fail:
- stop_ptraced_child(pid, stack, 1, 0);
+ stop_ptraced_child(pid, 1, 0);
fail_stopped:
printk("missing\n");
}
void __init check_ptrace(void)
{
- void *stack;
int pid, syscall, n, status;
printk("Checking that ptrace can change system call numbers...");
- pid = start_ptraced_child(&stack);
+ pid = start_ptraced_child();
if (ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD) < 0)
panic("check_ptrace: PTRACE_SETOPTIONS failed, errno = %d", errno);
@@ -340,7 +330,7 @@
break;
}
}
- stop_ptraced_child(pid, stack, 0, 1);
+ stop_ptraced_child(pid, 0, 1);
printk("OK\n");
check_sysemu();
}
@@ -372,11 +362,10 @@
static inline int check_skas3_ptrace_support(void)
{
struct ptrace_faultinfo fi;
- void *stack;
int pid, n, ret = 1;
printf("Checking for the skas3 patch in the host...");
- pid = start_ptraced_child(&stack);
+ pid = start_ptraced_child();
n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi);
if (n < 0) {
@@ -391,7 +380,7 @@
}
init_registers(pid);
- stop_ptraced_child(pid, stack, 1, 1);
+ stop_ptraced_child(pid, 1, 1);
return(ret);
}
diff --git a/arch/um/kernel/skas/process_kern.c b/arch/um/kernel/skas/process_kern.c
index ab5d327..fc71ef2 100644
--- a/arch/um/kernel/skas/process_kern.c
+++ b/arch/um/kernel/skas/process_kern.c
@@ -68,8 +68,11 @@
* 0 if it just exits
*/
n = run_kernel_thread(fn, arg, ¤t->thread.exec_buf);
- if(n == 1)
+ if(n == 1){
+ /* Handle any immediate reschedules or signals */
+ interrupt_end();
userspace(¤t->thread.regs.regs);
+ }
else do_exit(0);
}
@@ -96,6 +99,8 @@
schedule_tail(current->thread.prev_sched);
current->thread.prev_sched = NULL;
+ /* Handle any immediate reschedules or signals */
+ interrupt_end();
userspace(¤t->thread.regs.regs);
}
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 4184271..8736d09 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -26,7 +26,6 @@
#include "asm/setup.h"
#include "ubd_user.h"
#include "asm/current.h"
-#include "asm/setup.h"
#include "user_util.h"
#include "kern_util.h"
#include "kern.h"
diff --git a/arch/um/os-Linux/elf_aux.c b/arch/um/os-Linux/elf_aux.c
index 9aee0b6..f0d6060 100644
--- a/arch/um/os-Linux/elf_aux.c
+++ b/arch/um/os-Linux/elf_aux.c
@@ -45,7 +45,11 @@
elf_aux_hwcap = auxv->a_un.a_val;
break;
case AT_PLATFORM:
- elf_aux_platform = auxv->a_un.a_ptr;
+ /* elf.h removed the pointer elements from
+ * a_un, so we have to use a_val, which is
+ * all that's left.
+ */
+ elf_aux_platform = (char *) auxv->a_un.a_val;
break;
case AT_PAGESZ:
page_size = auxv->a_un.a_val;
diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c
index 77d4066..fd45bb2 100644
--- a/arch/um/os-Linux/file.c
+++ b/arch/um/os-Linux/file.c
@@ -363,7 +363,7 @@
(int (*)(int, void *, int)) write, copy_to_user_proc));
}
-int os_file_size(char *file, long long *size_out)
+int os_file_size(char *file, unsigned long long *size_out)
{
struct uml_stat buf;
int err;
diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules
index 0b24918..98346c7 100644
--- a/arch/um/scripts/Makefile.rules
+++ b/arch/um/scripts/Makefile.rules
@@ -14,7 +14,7 @@
cmd_make_link = ln -sf $(srctree)/arch/$(SUBARCH)/$($(notdir $@)-dir)/$(notdir $@) $@
# this needs to be before the foreach, because targets does not accept
-# complete paths like $(obj)/$(f). To make sure this works, use a := assignment,
+# complete paths like $(obj)/$(f). To make sure this works, use a := assignment
# or we will get $(obj)/$(f) in the "targets" value.
# Also, this forces you to use the := syntax when assigning to targets.
# Otherwise the line below will cause an infinite loop (if you don't know why,
diff --git a/arch/x86_64/kernel/aperture.c b/arch/x86_64/kernel/aperture.c
index a491f72..504e634 100644
--- a/arch/x86_64/kernel/aperture.c
+++ b/arch/x86_64/kernel/aperture.c
@@ -33,12 +33,10 @@
int fix_aperture __initdata = 1;
-#define NB_ID_3 (PCI_VENDOR_ID_AMD | (0x1103<<16))
+/* This code runs before the PCI subsystem is initialized, so just
+ access the northbridge directly. */
-static struct resource aper_res = {
- .name = "Aperture",
- .flags = IORESOURCE_MEM,
-};
+#define NB_ID_3 (PCI_VENDOR_ID_AMD | (0x1103<<16))
static u32 __init allocate_aperture(void)
{
@@ -55,24 +53,11 @@
aper_size = (32 * 1024 * 1024) << fallback_aper_order;
/*
- * Aperture has to be naturally aligned. This means an 2GB
- * aperture won't have much chances to find a place in the
- * lower 4GB of memory. Unfortunately we cannot move it up
- * because that would make the IOMMU useless.
+ * Aperture has to be naturally aligned. This means an 2GB aperture won't
+ * have much chances to find a place in the lower 4GB of memory.
+ * Unfortunately we cannot move it up because that would make the
+ * IOMMU useless.
*/
-
- /* First try to find some free unused space */
- if (!allocate_resource(&iomem_resource, &aper_res,
- aper_size,
- 0, 0xffffffff,
- aper_size,
- NULL, NULL)) {
- printk(KERN_INFO "Putting aperture at %lx-%lx\n",
- aper_res.start, aper_res.end);
- return aper_res.start;
- }
-
- /* No free space found. Go on to waste some memory... */
p = __alloc_bootmem_node(nd0, aper_size, aper_size, 0);
if (!p || __pa(p)+aper_size > 0xffffffff) {
printk("Cannot allocate aperture memory hole (%p,%uK)\n",
@@ -81,7 +66,7 @@
free_bootmem_node(nd0, (unsigned long)p, aper_size);
return 0;
}
- printk("Mapping aperture over %d KB of precious RAM @ %lx\n",
+ printk("Mapping aperture over %d KB of RAM @ %lx\n",
aper_size >> 10, __pa(p));
return (u32)__pa(p);
}
@@ -102,16 +87,10 @@
printk("Aperture from %s pointing to e820 RAM. Ignoring.\n",name);
return 0;
}
- /* Don't check the resource here because the aperture is usually
- in an e820 reserved area, and we allocated these earlier. */
return 1;
}
-/*
- * Find a PCI capability.
- * This code runs before the PCI subsystem is initialized, so just
- * access the northbridge directly.
- */
+/* Find a PCI capability */
static __u32 __init find_cap(int num, int slot, int func, int cap)
{
u8 pos;
@@ -276,6 +255,8 @@
fallback_aper_force) {
printk("Your BIOS doesn't leave a aperture memory hole\n");
printk("Please enable the IOMMU option in the BIOS setup\n");
+ printk("This costs you %d MB of RAM\n",
+ 32 << fallback_aper_order);
aper_order = fallback_aper_order;
aper_alloc = allocate_aperture();
diff --git a/drivers/atm/Makefile b/drivers/atm/Makefile
index d1dcd8e..5b77188 100644
--- a/drivers/atm/Makefile
+++ b/drivers/atm/Makefile
@@ -39,7 +39,8 @@
fore_200e-objs += fore200e_pca_fw.o
# guess the target endianess to choose the right PCA-200E firmware image
ifeq ($(CONFIG_ATM_FORE200E_PCA_DEFAULT_FW),y)
- CONFIG_ATM_FORE200E_PCA_FW = $(shell if test -n "`$(CC) -E -dM $(src)/../../include/asm/byteorder.h | grep ' __LITTLE_ENDIAN '`"; then echo $(obj)/pca200e.bin; else echo $(obj)/pca200e_ecd.bin2; fi)
+ byteorder.h := include$(if $(patsubst $(srctree),,$(objtree)),2)/asm/byteorder.h
+ CONFIG_ATM_FORE200E_PCA_FW := $(obj)/pca200e$(if $(shell $(CC) -E -dM $(byteorder.h) | grep ' __LITTLE_ENDIAN '),.bin,_ecd.bin2)
endif
endif
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index 9e65bfb..5f70219 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -383,8 +383,7 @@
switch(fore200e->state) {
case FORE200E_STATE_COMPLETE:
- if (fore200e->stats)
- kfree(fore200e->stats);
+ kfree(fore200e->stats);
case FORE200E_STATE_IRQ:
free_irq(fore200e->irq, fore200e->atm_dev);
@@ -963,8 +962,7 @@
entry, txq->tail, entry->vc_map, entry->skb);
/* free copy of misaligned data */
- if (entry->data)
- kfree(entry->data);
+ kfree(entry->data);
/* remove DMA mapping */
fore200e->bus->dma_unmap(fore200e, entry->tpd->tsd[ 0 ].buffer, entry->tpd->tsd[ 0 ].length,
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 3022c54..df2c83f 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -412,8 +412,7 @@
init_one_failure:
if (atm_dev)
atm_dev_deregister(atm_dev);
- if (he_dev)
- kfree(he_dev);
+ kfree(he_dev);
pci_disable_device(pci_dev);
return err;
}
@@ -2534,8 +2533,7 @@
open_failed:
if (err) {
- if (he_vcc)
- kfree(he_vcc);
+ kfree(he_vcc);
clear_bit(ATM_VF_ADDR, &vcc->flags);
}
else
diff --git a/drivers/atm/nicstar.c b/drivers/atm/nicstar.c
index 85bf5c8..b2a7b75 100644
--- a/drivers/atm/nicstar.c
+++ b/drivers/atm/nicstar.c
@@ -676,10 +676,10 @@
PRINTK("nicstar%d: RSQ base at 0x%x.\n", i, (u32) card->rsq.base);
/* Initialize SCQ0, the only VBR SCQ used */
- card->scq1 = (scq_info *) NULL;
- card->scq2 = (scq_info *) NULL;
+ card->scq1 = NULL;
+ card->scq2 = NULL;
card->scq0 = get_scq(VBR_SCQSIZE, NS_VRSCD0);
- if (card->scq0 == (scq_info *) NULL)
+ if (card->scq0 == NULL)
{
printk("nicstar%d: can't get SCQ0.\n", i);
error = 12;
@@ -993,24 +993,24 @@
int i;
if (size != VBR_SCQSIZE && size != CBR_SCQSIZE)
- return (scq_info *) NULL;
+ return NULL;
scq = (scq_info *) kmalloc(sizeof(scq_info), GFP_KERNEL);
- if (scq == (scq_info *) NULL)
- return (scq_info *) NULL;
+ if (scq == NULL)
+ return NULL;
scq->org = kmalloc(2 * size, GFP_KERNEL);
if (scq->org == NULL)
{
kfree(scq);
- return (scq_info *) NULL;
+ return NULL;
}
scq->skb = (struct sk_buff **) kmalloc(sizeof(struct sk_buff *) *
(size / NS_SCQE_SIZE), GFP_KERNEL);
- if (scq->skb == (struct sk_buff **) NULL)
+ if (scq->skb == NULL)
{
kfree(scq->org);
kfree(scq);
- return (scq_info *) NULL;
+ return NULL;
}
scq->num_entries = size / NS_SCQE_SIZE;
scq->base = (ns_scqe *) ALIGN_ADDRESS(scq->org, size);
@@ -1498,7 +1498,7 @@
vc->cbr_scd = NS_FRSCD + frscdi * NS_FRSCD_SIZE;
scq = get_scq(CBR_SCQSIZE, vc->cbr_scd);
- if (scq == (scq_info *) NULL)
+ if (scq == NULL)
{
PRINTK("nicstar%d: can't get fixed rate SCQ.\n", card->index);
card->scd2vc[frscdi] = NULL;
diff --git a/drivers/atm/zatm.c b/drivers/atm/zatm.c
index 47a8005..8d5e65c 100644
--- a/drivers/atm/zatm.c
+++ b/drivers/atm/zatm.c
@@ -902,7 +902,7 @@
zatm_dev->tx_bw += vcc->qos.txtp.min_pcr;
dealloc_shaper(vcc->dev,zatm_vcc->shaper);
}
- if (zatm_vcc->ring) kfree(zatm_vcc->ring);
+ kfree(zatm_vcc->ring);
}
@@ -1339,12 +1339,9 @@
return 0;
out:
for (i = 0; i < NR_MBX; i++)
- if (zatm_dev->mbx_start[i] != 0)
- kfree((void *) zatm_dev->mbx_start[i]);
- if (zatm_dev->rx_map != NULL)
- kfree(zatm_dev->rx_map);
- if (zatm_dev->tx_map != NULL)
- kfree(zatm_dev->tx_map);
+ kfree(zatm_dev->mbx_start[i]);
+ kfree(zatm_dev->rx_map);
+ kfree(zatm_dev->tx_map);
free_irq(zatm_dev->irq, dev);
return error;
}
diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c
index 0ef7a00..2210bac 100644
--- a/drivers/block/cfq-iosched.c
+++ b/drivers/block/cfq-iosched.c
@@ -1202,13 +1202,16 @@
if (new_cfqq) {
cfqq = new_cfqq;
new_cfqq = NULL;
- } else if (gfp_mask & __GFP_WAIT) {
+ } else {
spin_unlock_irq(cfqd->queue->queue_lock);
new_cfqq = kmem_cache_alloc(cfq_pool, gfp_mask);
spin_lock_irq(cfqd->queue->queue_lock);
+
+ if (!new_cfqq && !(gfp_mask & __GFP_WAIT))
+ goto out;
+
goto retry;
- } else
- goto out;
+ }
memset(cfqq, 0, sizeof(*cfqq));
diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c
index 6b79b43..8998292 100644
--- a/drivers/block/elevator.c
+++ b/drivers/block/elevator.c
@@ -220,11 +220,6 @@
kfree(e);
}
-static int elevator_global_init(void)
-{
- return 0;
-}
-
int elv_merge(request_queue_t *q, struct request **req, struct bio *bio)
{
elevator_t *e = q->elevator;
@@ -322,7 +317,7 @@
int nrq = q->rq.count[READ] + q->rq.count[WRITE]
- q->in_flight;
- if (nrq == q->unplug_thresh)
+ if (nrq >= q->unplug_thresh)
__generic_unplug_device(q);
}
} else
@@ -692,8 +687,6 @@
return len;
}
-module_init(elevator_global_init);
-
EXPORT_SYMBOL(elv_add_request);
EXPORT_SYMBOL(__elv_add_request);
EXPORT_SYMBOL(elv_requeue_request);
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index ce42889..19c5e59 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -8,13 +8,12 @@
* and is not licensed separately. See file COPYING for details.
*
* TODO (sorted by decreasing priority)
+ * -- Kill first_open (Al Viro fixed the block layer now)
* -- Do resets with usb_device_reset (needs a thread context, use khubd)
* -- set readonly flag for CDs, set removable flag for CF readers
* -- do inquiry and verify we got a disk and not a tape (for LUN mismatch)
- * -- support pphaneuf's SDDR-75 with two LUNs (also broken capacity...)
* -- special case some senses, e.g. 3a/0 -> no media present, reduce retries
* -- verify the 13 conditions and do bulk resets
- * -- normal pool of commands instead of cmdv[]?
* -- kill last_pipe and simply do two-state clearing on both pipes
* -- verify protocol (bulk) from USB descriptors (maybe...)
* -- highmem and sg
@@ -49,7 +48,14 @@
#define US_SC_SCSI 0x06 /* Transparent */
/*
+ * This many LUNs per USB device.
+ * Every one of them takes a host, see UB_MAX_HOSTS.
*/
+#define UB_MAX_LUNS 9
+
+/*
+ */
+
#define UB_MINORS_PER_MAJOR 8
#define UB_MAX_CDB_SIZE 16 /* Corresponds to Bulk */
@@ -65,7 +71,7 @@
u32 Tag; /* unique per command id */
__le32 DataTransferLength; /* size of data */
u8 Flags; /* direction in bit 0 */
- u8 Lun; /* LUN normally 0 */
+ u8 Lun; /* LUN */
u8 Length; /* of of the CDB */
u8 CDB[UB_MAX_CDB_SIZE]; /* max command */
};
@@ -168,6 +174,7 @@
unsigned int len; /* Requested length */
// struct scatterlist sgv[UB_MAX_REQ_SG];
+ struct ub_lun *lun;
void (*done)(struct ub_dev *, struct ub_scsi_cmd *);
void *back;
};
@@ -252,25 +259,47 @@
};
/*
- * The UB device instance.
+ * The block device instance (one per LUN).
*/
-struct ub_dev {
- spinlock_t lock;
- int id; /* Number among ub's */
- atomic_t poison; /* The USB device is disconnected */
- int openc; /* protected by ub_lock! */
- /* kref is too implicit for our taste */
- unsigned int tagcnt;
+struct ub_lun {
+ struct ub_dev *udev;
+ struct list_head link;
+ struct gendisk *disk;
+ int id; /* Host index */
+ int num; /* LUN number */
+ char name[16];
+
int changed; /* Media was changed */
int removable;
int readonly;
int first_open; /* Kludge. See ub_bd_open. */
- char name[8];
+
+ /* Use Ingo's mempool if or when we have more than one command. */
+ /*
+ * Currently we never need more than one command for the whole device.
+ * However, giving every LUN a command is a cheap and automatic way
+ * to enforce fairness between them.
+ */
+ int cmda[1];
+ struct ub_scsi_cmd cmdv[1];
+
+ struct ub_capacity capacity;
+};
+
+/*
+ * The USB device instance.
+ */
+struct ub_dev {
+ spinlock_t lock;
+ atomic_t poison; /* The USB device is disconnected */
+ int openc; /* protected by ub_lock! */
+ /* kref is too implicit for our taste */
+ unsigned int tagcnt;
+ char name[12];
struct usb_device *dev;
struct usb_interface *intf;
- struct ub_capacity capacity;
- struct gendisk *disk;
+ struct list_head luns;
unsigned int send_bulk_pipe; /* cached pipe values */
unsigned int recv_bulk_pipe;
@@ -279,10 +308,6 @@
struct tasklet_struct tasklet;
- /* XXX Use Ingo's mempool (once we have more than one) */
- int cmda[1];
- struct ub_scsi_cmd cmdv[1];
-
struct ub_scsi_cmd_queue cmd_queue;
struct ub_scsi_cmd top_rqs_cmd; /* REQUEST SENSE */
unsigned char top_sense[UB_SENSE_SIZE];
@@ -301,9 +326,9 @@
/*
*/
static void ub_cleanup(struct ub_dev *sc);
-static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq);
-static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
- struct request *rq);
+static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq);
+static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
+ struct ub_scsi_cmd *cmd, struct request *rq);
static int ub_cmd_build_packet(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
struct request *rq);
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd);
@@ -320,8 +345,10 @@
static int ub_submit_clear_stall(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
int stalled_pipe);
static void ub_top_sense_done(struct ub_dev *sc, struct ub_scsi_cmd *scmd);
-static int ub_sync_tur(struct ub_dev *sc);
-static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret);
+static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun);
+static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
+ struct ub_capacity *ret);
+static int ub_probe_lun(struct ub_dev *sc, int lnum);
/*
*/
@@ -342,6 +369,7 @@
*/
#define UB_MAX_HOSTS 26
static char ub_hostv[UB_MAX_HOSTS];
+
static DEFINE_SPINLOCK(ub_lock); /* Locks globals and ->openc */
/*
@@ -406,6 +434,8 @@
{
struct usb_interface *intf;
struct ub_dev *sc;
+ struct list_head *p;
+ struct ub_lun *lun;
int cnt;
unsigned long flags;
int nc, nh;
@@ -421,9 +451,15 @@
spin_lock_irqsave(&sc->lock, flags);
cnt += sprintf(page + cnt,
- "qlen %d qmax %d changed %d removable %d readonly %d\n",
- sc->cmd_queue.qlen, sc->cmd_queue.qmax,
- sc->changed, sc->removable, sc->readonly);
+ "qlen %d qmax %d\n",
+ sc->cmd_queue.qlen, sc->cmd_queue.qmax);
+
+ list_for_each (p, &sc->luns) {
+ lun = list_entry(p, struct ub_lun, link);
+ cnt += sprintf(page + cnt,
+ "lun %u changed %d removable %d readonly %d\n",
+ lun->num, lun->changed, lun->removable, lun->readonly);
+ }
if ((nc = sc->tr.cur + 1) == SCMD_TRACE_SZ) nc = 0;
for (j = 0; j < SCMD_TRACE_SZ; j++) {
@@ -523,53 +559,63 @@
*/
static void ub_cleanup(struct ub_dev *sc)
{
+ struct list_head *p;
+ struct ub_lun *lun;
request_queue_t *q;
- /* I don't think queue can be NULL. But... Stolen from sx8.c */
- if ((q = sc->disk->queue) != NULL)
- blk_cleanup_queue(q);
+ while (!list_empty(&sc->luns)) {
+ p = sc->luns.next;
+ lun = list_entry(p, struct ub_lun, link);
+ list_del(p);
- /*
- * If we zero disk->private_data BEFORE put_disk, we have to check
- * for NULL all over the place in open, release, check_media and
- * revalidate, because the block level semaphore is well inside the
- * put_disk. But we cannot zero after the call, because *disk is gone.
- * The sd.c is blatantly racy in this area.
- */
- /* disk->private_data = NULL; */
- put_disk(sc->disk);
- sc->disk = NULL;
+ /* I don't think queue can be NULL. But... Stolen from sx8.c */
+ if ((q = lun->disk->queue) != NULL)
+ blk_cleanup_queue(q);
+ /*
+ * If we zero disk->private_data BEFORE put_disk, we have
+ * to check for NULL all over the place in open, release,
+ * check_media and revalidate, because the block level
+ * semaphore is well inside the put_disk.
+ * But we cannot zero after the call, because *disk is gone.
+ * The sd.c is blatantly racy in this area.
+ */
+ /* disk->private_data = NULL; */
+ put_disk(lun->disk);
+ lun->disk = NULL;
- ub_id_put(sc->id);
+ ub_id_put(lun->id);
+ kfree(lun);
+ }
+
kfree(sc);
}
/*
* The "command allocator".
*/
-static struct ub_scsi_cmd *ub_get_cmd(struct ub_dev *sc)
+static struct ub_scsi_cmd *ub_get_cmd(struct ub_lun *lun)
{
struct ub_scsi_cmd *ret;
- if (sc->cmda[0])
+ if (lun->cmda[0])
return NULL;
- ret = &sc->cmdv[0];
- sc->cmda[0] = 1;
+ ret = &lun->cmdv[0];
+ lun->cmda[0] = 1;
return ret;
}
-static void ub_put_cmd(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
+static void ub_put_cmd(struct ub_lun *lun, struct ub_scsi_cmd *cmd)
{
- if (cmd != &sc->cmdv[0]) {
+ if (cmd != &lun->cmdv[0]) {
printk(KERN_WARNING "%s: releasing a foreign cmd %p\n",
- sc->name, cmd);
+ lun->name, cmd);
return;
}
- if (!sc->cmda[0]) {
- printk(KERN_WARNING "%s: releasing a free cmd\n", sc->name);
+ if (!lun->cmda[0]) {
+ printk(KERN_WARNING "%s: releasing a free cmd\n", lun->name);
return;
}
- sc->cmda[0] = 0;
+ lun->cmda[0] = 0;
}
/*
@@ -630,29 +676,30 @@
static void ub_bd_rq_fn(request_queue_t *q)
{
- struct ub_dev *sc = q->queuedata;
+ struct ub_lun *lun = q->queuedata;
struct request *rq;
while ((rq = elv_next_request(q)) != NULL) {
- if (ub_bd_rq_fn_1(sc, rq) != 0) {
+ if (ub_bd_rq_fn_1(lun, rq) != 0) {
blk_stop_queue(q);
break;
}
}
}
-static int ub_bd_rq_fn_1(struct ub_dev *sc, struct request *rq)
+static int ub_bd_rq_fn_1(struct ub_lun *lun, struct request *rq)
{
+ struct ub_dev *sc = lun->udev;
struct ub_scsi_cmd *cmd;
int rc;
- if (atomic_read(&sc->poison) || sc->changed) {
+ if (atomic_read(&sc->poison) || lun->changed) {
blkdev_dequeue_request(rq);
ub_end_rq(rq, 0);
return 0;
}
- if ((cmd = ub_get_cmd(sc)) == NULL)
+ if ((cmd = ub_get_cmd(lun)) == NULL)
return -1;
memset(cmd, 0, sizeof(struct ub_scsi_cmd));
@@ -661,32 +708,30 @@
if (blk_pc_request(rq)) {
rc = ub_cmd_build_packet(sc, cmd, rq);
} else {
- rc = ub_cmd_build_block(sc, cmd, rq);
+ rc = ub_cmd_build_block(sc, lun, cmd, rq);
}
if (rc != 0) {
- ub_put_cmd(sc, cmd);
+ ub_put_cmd(lun, cmd);
ub_end_rq(rq, 0);
- blk_start_queue(sc->disk->queue);
return 0;
}
-
cmd->state = UB_CMDST_INIT;
+ cmd->lun = lun;
cmd->done = ub_rw_cmd_done;
cmd->back = rq;
cmd->tag = sc->tagcnt++;
if ((rc = ub_submit_scsi(sc, cmd)) != 0) {
- ub_put_cmd(sc, cmd);
+ ub_put_cmd(lun, cmd);
ub_end_rq(rq, 0);
- blk_start_queue(sc->disk->queue);
return 0;
}
return 0;
}
-static int ub_cmd_build_block(struct ub_dev *sc, struct ub_scsi_cmd *cmd,
- struct request *rq)
+static int ub_cmd_build_block(struct ub_dev *sc, struct ub_lun *lun,
+ struct ub_scsi_cmd *cmd, struct request *rq)
{
int ub_dir;
#if 0 /* We use rq->buffer for now */
@@ -707,7 +752,7 @@
sg = &cmd->sgv[0];
n_elem = blk_rq_map_sg(q, rq, sg);
if (n_elem <= 0) {
- ub_put_cmd(sc, cmd);
+ ub_put_cmd(lun, cmd);
ub_end_rq(rq, 0);
blk_start_queue(q);
return 0; /* request with no s/g entries? */
@@ -716,7 +761,7 @@
if (n_elem != 1) { /* Paranoia */
printk(KERN_WARNING "%s: request with %d segments\n",
sc->name, n_elem);
- ub_put_cmd(sc, cmd);
+ ub_put_cmd(lun, cmd);
ub_end_rq(rq, 0);
blk_start_queue(q);
return 0;
@@ -748,8 +793,8 @@
* The call to blk_queue_hardsect_size() guarantees that request
* is aligned, but it is given in terms of 512 byte units, always.
*/
- block = rq->sector >> sc->capacity.bshift;
- nblks = rq->nr_sectors >> sc->capacity.bshift;
+ block = rq->sector >> lun->capacity.bshift;
+ nblks = rq->nr_sectors >> lun->capacity.bshift;
cmd->cdb[0] = (ub_dir == UB_DIR_READ)? READ_10: WRITE_10;
/* 10-byte uses 4 bytes of LBA: 2147483648KB, 2097152MB, 2048GB */
@@ -803,7 +848,8 @@
static void ub_rw_cmd_done(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
{
struct request *rq = cmd->back;
- struct gendisk *disk = sc->disk;
+ struct ub_lun *lun = cmd->lun;
+ struct gendisk *disk = lun->disk;
request_queue_t *q = disk->queue;
int uptodate;
@@ -818,7 +864,7 @@
else
uptodate = 0;
- ub_put_cmd(sc, cmd);
+ ub_put_cmd(lun, cmd);
ub_end_rq(rq, uptodate);
blk_start_queue(q);
}
@@ -887,7 +933,7 @@
bcb->Tag = cmd->tag; /* Endianness is not important */
bcb->DataTransferLength = cpu_to_le32(cmd->len);
bcb->Flags = (cmd->dir == UB_DIR_READ) ? 0x80 : 0;
- bcb->Lun = 0; /* No multi-LUN yet */
+ bcb->Lun = (cmd->lun != NULL) ? cmd->lun->num : 0;
bcb->Length = cmd->cdb_len;
/* copy the command payload */
@@ -1002,9 +1048,8 @@
* The control pipe clears itself - nothing to do.
* XXX Might try to reset the device here and retry.
*/
- printk(KERN_NOTICE "%s: "
- "stall on control pipe for device %u\n",
- sc->name, sc->dev->devnum);
+ printk(KERN_NOTICE "%s: stall on control pipe\n",
+ sc->name);
goto Bad_End;
}
@@ -1025,9 +1070,8 @@
* The control pipe clears itself - nothing to do.
* XXX Might try to reset the device here and retry.
*/
- printk(KERN_NOTICE "%s: "
- "stall on control pipe for device %u\n",
- sc->name, sc->dev->devnum);
+ printk(KERN_NOTICE "%s: stall on control pipe\n",
+ sc->name);
goto Bad_End;
}
@@ -1046,9 +1090,8 @@
rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
if (rc != 0) {
printk(KERN_NOTICE "%s: "
- "unable to submit clear for device %u"
- " (code %d)\n",
- sc->name, sc->dev->devnum, rc);
+ "unable to submit clear (%d)\n",
+ sc->name, rc);
/*
* This is typically ENOMEM or some other such shit.
* Retrying is pointless. Just do Bad End on it...
@@ -1107,9 +1150,8 @@
rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
if (rc != 0) {
printk(KERN_NOTICE "%s: "
- "unable to submit clear for device %u"
- " (code %d)\n",
- sc->name, sc->dev->devnum, rc);
+ "unable to submit clear (%d)\n",
+ sc->name, rc);
/*
* This is typically ENOMEM or some other such shit.
* Retrying is pointless. Just do Bad End on it...
@@ -1140,9 +1182,8 @@
rc = ub_submit_clear_stall(sc, cmd, sc->last_pipe);
if (rc != 0) {
printk(KERN_NOTICE "%s: "
- "unable to submit clear for device %u"
- " (code %d)\n",
- sc->name, sc->dev->devnum, rc);
+ "unable to submit clear (%d)\n",
+ sc->name, rc);
/*
* This is typically ENOMEM or some other such shit.
* Retrying is pointless. Just do Bad End on it...
@@ -1164,9 +1205,8 @@
* encounter such a thing, try to read the CSW again.
*/
if (++cmd->stat_count >= 4) {
- printk(KERN_NOTICE "%s: "
- "unable to get CSW on device %u\n",
- sc->name, sc->dev->devnum);
+ printk(KERN_NOTICE "%s: unable to get CSW\n",
+ sc->name);
goto Bad_End;
}
__ub_state_stat(sc, cmd);
@@ -1207,10 +1247,8 @@
*/
if (++cmd->stat_count >= 4) {
printk(KERN_NOTICE "%s: "
- "tag mismatch orig 0x%x reply 0x%x "
- "on device %u\n",
- sc->name, cmd->tag, bcs->Tag,
- sc->dev->devnum);
+ "tag mismatch orig 0x%x reply 0x%x\n",
+ sc->name, cmd->tag, bcs->Tag);
goto Bad_End;
}
__ub_state_stat(sc, cmd);
@@ -1244,8 +1282,8 @@
} else {
printk(KERN_WARNING "%s: "
- "wrong command state %d on device %u\n",
- sc->name, cmd->state, sc->dev->devnum);
+ "wrong command state %d\n",
+ sc->name, cmd->state);
goto Bad_End;
}
return;
@@ -1288,7 +1326,6 @@
if ((rc = usb_submit_urb(&sc->work_urb, GFP_ATOMIC)) != 0) {
/* XXX Clear stalls */
- printk("%s: CSW #%d submit failed (%d)\n", sc->name, cmd->tag, rc); /* P3 */
ub_complete(&sc->work_done);
ub_state_done(sc, cmd, rc);
return;
@@ -1333,6 +1370,7 @@
scmd->state = UB_CMDST_INIT;
scmd->data = sc->top_sense;
scmd->len = UB_SENSE_SIZE;
+ scmd->lun = cmd->lun;
scmd->done = ub_top_sense_done;
scmd->back = cmd;
@@ -1411,14 +1449,14 @@
}
if (cmd != scmd->back) {
printk(KERN_WARNING "%s: "
- "sense done for wrong command 0x%x on device %u\n",
- sc->name, cmd->tag, sc->dev->devnum);
+ "sense done for wrong command 0x%x\n",
+ sc->name, cmd->tag);
return;
}
if (cmd->state != UB_CMDST_SENSE) {
printk(KERN_WARNING "%s: "
- "sense done with bad cmd state %d on device %u\n",
- sc->name, cmd->state, sc->dev->devnum);
+ "sense done with bad cmd state %d\n",
+ sc->name, cmd->state);
return;
}
@@ -1429,68 +1467,32 @@
ub_scsi_urb_compl(sc, cmd);
}
-#if 0
-/* Determine what the maximum LUN supported is */
-int usb_stor_Bulk_max_lun(struct us_data *us)
-{
- int result;
-
- /* issue the command */
- result = usb_stor_control_msg(us, us->recv_ctrl_pipe,
- US_BULK_GET_MAX_LUN,
- USB_DIR_IN | USB_TYPE_CLASS |
- USB_RECIP_INTERFACE,
- 0, us->ifnum, us->iobuf, 1, HZ);
-
- /*
- * Some devices (i.e. Iomega Zip100) need this -- apparently
- * the bulk pipes get STALLed when the GetMaxLUN request is
- * processed. This is, in theory, harmless to all other devices
- * (regardless of if they stall or not).
- */
- if (result < 0) {
- usb_stor_clear_halt(us, us->recv_bulk_pipe);
- usb_stor_clear_halt(us, us->send_bulk_pipe);
- }
-
- US_DEBUGP("GetMaxLUN command result is %d, data is %d\n",
- result, us->iobuf[0]);
-
- /* if we have a successful request, return the result */
- if (result == 1)
- return us->iobuf[0];
-
- /* return the default -- no LUNs */
- return 0;
-}
-#endif
-
/*
* This is called from a process context.
*/
-static void ub_revalidate(struct ub_dev *sc)
+static void ub_revalidate(struct ub_dev *sc, struct ub_lun *lun)
{
- sc->readonly = 0; /* XXX Query this from the device */
+ lun->readonly = 0; /* XXX Query this from the device */
- sc->capacity.nsec = 0;
- sc->capacity.bsize = 512;
- sc->capacity.bshift = 0;
+ lun->capacity.nsec = 0;
+ lun->capacity.bsize = 512;
+ lun->capacity.bshift = 0;
- if (ub_sync_tur(sc) != 0)
+ if (ub_sync_tur(sc, lun) != 0)
return; /* Not ready */
- sc->changed = 0;
+ lun->changed = 0;
- if (ub_sync_read_cap(sc, &sc->capacity) != 0) {
+ if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
/*
* The retry here means something is wrong, either with the
* device, with the transport, or with our code.
* We keep this because sd.c has retries for capacity.
*/
- if (ub_sync_read_cap(sc, &sc->capacity) != 0) {
- sc->capacity.nsec = 0;
- sc->capacity.bsize = 512;
- sc->capacity.bshift = 0;
+ if (ub_sync_read_cap(sc, lun, &lun->capacity) != 0) {
+ lun->capacity.nsec = 0;
+ lun->capacity.bsize = 512;
+ lun->capacity.bshift = 0;
}
}
}
@@ -1503,12 +1505,15 @@
static int ub_bd_open(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
+ struct ub_lun *lun;
struct ub_dev *sc;
unsigned long flags;
int rc;
- if ((sc = disk->private_data) == NULL)
+ if ((lun = disk->private_data) == NULL)
return -ENXIO;
+ sc = lun->udev;
+
spin_lock_irqsave(&ub_lock, flags);
if (atomic_read(&sc->poison)) {
spin_unlock_irqrestore(&ub_lock, flags);
@@ -1529,15 +1534,15 @@
* The bottom line is, Al Viro says that we should not allow
* bdev->bd_invalidated to be set when doing add_disk no matter what.
*/
- if (sc->first_open) {
- if (sc->changed) {
- sc->first_open = 0;
+ if (lun->first_open) {
+ lun->first_open = 0;
+ if (lun->changed) {
rc = -ENOMEDIUM;
goto err_open;
}
}
- if (sc->removable || sc->readonly)
+ if (lun->removable || lun->readonly)
check_disk_change(inode->i_bdev);
/*
@@ -1545,12 +1550,12 @@
* under some pretty murky conditions (a failure of READ CAPACITY).
* We may need it one day.
*/
- if (sc->removable && sc->changed && !(filp->f_flags & O_NDELAY)) {
+ if (lun->removable && lun->changed && !(filp->f_flags & O_NDELAY)) {
rc = -ENOMEDIUM;
goto err_open;
}
- if (sc->readonly && (filp->f_mode & FMODE_WRITE)) {
+ if (lun->readonly && (filp->f_mode & FMODE_WRITE)) {
rc = -EROFS;
goto err_open;
}
@@ -1567,7 +1572,8 @@
static int ub_bd_release(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
- struct ub_dev *sc = disk->private_data;
+ struct ub_lun *lun = disk->private_data;
+ struct ub_dev *sc = lun->udev;
ub_put(sc);
return 0;
@@ -1597,20 +1603,14 @@
*/
static int ub_bd_revalidate(struct gendisk *disk)
{
- struct ub_dev *sc = disk->private_data;
+ struct ub_lun *lun = disk->private_data;
- ub_revalidate(sc);
- /* This is pretty much a long term P3 */
- if (!atomic_read(&sc->poison)) { /* Cover sc->dev */
- printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n",
- sc->name, sc->dev->devnum,
- sc->capacity.nsec, sc->capacity.bsize);
- }
+ ub_revalidate(lun->udev, lun);
/* XXX Support sector size switching like in sr.c */
- blk_queue_hardsect_size(disk->queue, sc->capacity.bsize);
- set_capacity(disk, sc->capacity.nsec);
- // set_disk_ro(sdkp->disk, sc->readonly);
+ blk_queue_hardsect_size(disk->queue, lun->capacity.bsize);
+ set_capacity(disk, lun->capacity.nsec);
+ // set_disk_ro(sdkp->disk, lun->readonly);
return 0;
}
@@ -1626,9 +1626,9 @@
*/
static int ub_bd_media_changed(struct gendisk *disk)
{
- struct ub_dev *sc = disk->private_data;
+ struct ub_lun *lun = disk->private_data;
- if (!sc->removable)
+ if (!lun->removable)
return 0;
/*
@@ -1640,12 +1640,12 @@
* will fail, then block layer discards the data. Since we never
* spin drives up, such devices simply cannot be used with ub anyway.
*/
- if (ub_sync_tur(sc) != 0) {
- sc->changed = 1;
+ if (ub_sync_tur(lun->udev, lun) != 0) {
+ lun->changed = 1;
return 1;
}
- return sc->changed;
+ return lun->changed;
}
static struct block_device_operations ub_bd_fops = {
@@ -1669,7 +1669,7 @@
/*
* Test if the device has a check condition on it, synchronously.
*/
-static int ub_sync_tur(struct ub_dev *sc)
+static int ub_sync_tur(struct ub_dev *sc, struct ub_lun *lun)
{
struct ub_scsi_cmd *cmd;
enum { ALLOC_SIZE = sizeof(struct ub_scsi_cmd) };
@@ -1688,6 +1688,7 @@
cmd->cdb_len = 6;
cmd->dir = UB_DIR_NONE;
cmd->state = UB_CMDST_INIT;
+ cmd->lun = lun; /* This may be NULL, but that's ok */
cmd->done = ub_probe_done;
cmd->back = &compl;
@@ -1718,7 +1719,8 @@
/*
* Read the SCSI capacity synchronously (for probing).
*/
-static int ub_sync_read_cap(struct ub_dev *sc, struct ub_capacity *ret)
+static int ub_sync_read_cap(struct ub_dev *sc, struct ub_lun *lun,
+ struct ub_capacity *ret)
{
struct ub_scsi_cmd *cmd;
char *p;
@@ -1743,6 +1745,7 @@
cmd->state = UB_CMDST_INIT;
cmd->data = p;
cmd->len = 8;
+ cmd->lun = lun;
cmd->done = ub_probe_done;
cmd->back = &compl;
@@ -1812,6 +1815,90 @@
}
/*
+ * Get number of LUNs by the way of Bulk GetMaxLUN command.
+ */
+static int ub_sync_getmaxlun(struct ub_dev *sc)
+{
+ int ifnum = sc->intf->cur_altsetting->desc.bInterfaceNumber;
+ unsigned char *p;
+ enum { ALLOC_SIZE = 1 };
+ struct usb_ctrlrequest *cr;
+ struct completion compl;
+ struct timer_list timer;
+ int nluns;
+ int rc;
+
+ init_completion(&compl);
+
+ rc = -ENOMEM;
+ if ((p = kmalloc(ALLOC_SIZE, GFP_KERNEL)) == NULL)
+ goto err_alloc;
+ *p = 55;
+
+ cr = &sc->work_cr;
+ cr->bRequestType = USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
+ cr->bRequest = US_BULK_GET_MAX_LUN;
+ cr->wValue = cpu_to_le16(0);
+ cr->wIndex = cpu_to_le16(ifnum);
+ cr->wLength = cpu_to_le16(1);
+
+ usb_fill_control_urb(&sc->work_urb, sc->dev, sc->recv_ctrl_pipe,
+ (unsigned char*) cr, p, 1, ub_probe_urb_complete, &compl);
+ sc->work_urb.transfer_flags = 0;
+ sc->work_urb.actual_length = 0;
+ sc->work_urb.error_count = 0;
+ sc->work_urb.status = 0;
+
+ if ((rc = usb_submit_urb(&sc->work_urb, GFP_KERNEL)) != 0) {
+ if (rc == -EPIPE) {
+ printk("%s: Stall at GetMaxLUN, using 1 LUN\n",
+ sc->name); /* P3 */
+ } else {
+ printk(KERN_WARNING
+ "%s: Unable to submit GetMaxLUN (%d)\n",
+ sc->name, rc);
+ }
+ goto err_submit;
+ }
+
+ init_timer(&timer);
+ timer.function = ub_probe_timeout;
+ timer.data = (unsigned long) &compl;
+ timer.expires = jiffies + UB_CTRL_TIMEOUT;
+ add_timer(&timer);
+
+ wait_for_completion(&compl);
+
+ del_timer_sync(&timer);
+ usb_kill_urb(&sc->work_urb);
+
+ if (sc->work_urb.actual_length != 1) {
+ printk("%s: GetMaxLUN returned %d bytes\n", sc->name,
+ sc->work_urb.actual_length); /* P3 */
+ nluns = 0;
+ } else {
+ if ((nluns = *p) == 55) {
+ nluns = 0;
+ } else {
+ /* GetMaxLUN returns the maximum LUN number */
+ nluns += 1;
+ if (nluns > UB_MAX_LUNS)
+ nluns = UB_MAX_LUNS;
+ }
+ printk("%s: GetMaxLUN returned %d, using %d LUNs\n", sc->name,
+ *p, nluns); /* P3 */
+ }
+
+ kfree(p);
+ return nluns;
+
+err_submit:
+ kfree(p);
+err_alloc:
+ return rc;
+}
+
+/*
* Clear initial stalls.
*/
static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
@@ -1897,8 +1984,8 @@
}
if (ep_in == NULL || ep_out == NULL) {
- printk(KERN_NOTICE "%s: device %u failed endpoint check\n",
- sc->name, sc->dev->devnum);
+ printk(KERN_NOTICE "%s: failed endpoint check\n",
+ sc->name);
return -EIO;
}
@@ -1921,8 +2008,7 @@
const struct usb_device_id *dev_id)
{
struct ub_dev *sc;
- request_queue_t *q;
- struct gendisk *disk;
+ int nluns;
int rc;
int i;
@@ -1931,6 +2017,7 @@
goto err_core;
memset(sc, 0, sizeof(struct ub_dev));
spin_lock_init(&sc->lock);
+ INIT_LIST_HEAD(&sc->luns);
usb_init_urb(&sc->work_urb);
tasklet_init(&sc->tasklet, ub_scsi_action, (unsigned long)sc);
atomic_set(&sc->poison, 0);
@@ -1942,19 +2029,16 @@
ub_init_completion(&sc->work_done);
sc->work_done.done = 1; /* A little yuk, but oh well... */
- rc = -ENOSR;
- if ((sc->id = ub_id_get()) == -1)
- goto err_id;
- snprintf(sc->name, 8, DRV_NAME "%c", sc->id + 'a');
-
sc->dev = interface_to_usbdev(intf);
sc->intf = intf;
// sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
-
usb_set_intfdata(intf, sc);
usb_get_dev(sc->dev);
// usb_get_intf(sc->intf); /* Do we need this? */
+ snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
+ sc->dev->bus->busnum, sc->dev->devnum);
+
/* XXX Verify that we can handle the device (from descriptors) */
ub_get_pipes(sc, sc->dev, intf);
@@ -1992,35 +2076,88 @@
* In any case it's not our business how revaliadation is implemented.
*/
for (i = 0; i < 3; i++) { /* Retries for benh's key */
- if ((rc = ub_sync_tur(sc)) <= 0) break;
+ if ((rc = ub_sync_tur(sc, NULL)) <= 0) break;
if (rc != 0x6) break;
msleep(10);
}
- sc->removable = 1; /* XXX Query this from the device */
- sc->changed = 1; /* ub_revalidate clears only */
- sc->first_open = 1;
+ nluns = 1;
+ for (i = 0; i < 3; i++) {
+ if ((rc = ub_sync_getmaxlun(sc)) < 0) {
+ /*
+ * Some devices (i.e. Iomega Zip100) need this --
+ * apparently the bulk pipes get STALLed when the
+ * GetMaxLUN request is processed.
+ * XXX I have a ZIP-100, verify it does this.
+ */
+ if (rc == -EPIPE) {
+ ub_probe_clear_stall(sc, sc->recv_bulk_pipe);
+ ub_probe_clear_stall(sc, sc->send_bulk_pipe);
+ }
+ break;
+ }
+ if (rc != 0) {
+ nluns = rc;
+ break;
+ }
+ msleep(100);
+ }
- ub_revalidate(sc);
- /* This is pretty much a long term P3 */
- printk(KERN_INFO "%s: device %u capacity nsec %ld bsize %u\n",
- sc->name, sc->dev->devnum, sc->capacity.nsec, sc->capacity.bsize);
+ for (i = 0; i < nluns; i++) {
+ ub_probe_lun(sc, i);
+ }
+ return 0;
- /*
- * Just one disk per sc currently, but maybe more.
- */
+ /* device_remove_file(&sc->intf->dev, &dev_attr_diag); */
+err_diag:
+ usb_set_intfdata(intf, NULL);
+ // usb_put_intf(sc->intf);
+ usb_put_dev(sc->dev);
+ kfree(sc);
+err_core:
+ return rc;
+}
+
+static int ub_probe_lun(struct ub_dev *sc, int lnum)
+{
+ struct ub_lun *lun;
+ request_queue_t *q;
+ struct gendisk *disk;
+ int rc;
+
+ rc = -ENOMEM;
+ if ((lun = kmalloc(sizeof(struct ub_lun), GFP_KERNEL)) == NULL)
+ goto err_alloc;
+ memset(lun, 0, sizeof(struct ub_lun));
+ lun->num = lnum;
+
+ rc = -ENOSR;
+ if ((lun->id = ub_id_get()) == -1)
+ goto err_id;
+
+ lun->udev = sc;
+ list_add(&lun->link, &sc->luns);
+
+ snprintf(lun->name, 16, DRV_NAME "%c(%d.%d.%d)",
+ lun->id + 'a', sc->dev->bus->busnum, sc->dev->devnum, lun->num);
+
+ lun->removable = 1; /* XXX Query this from the device */
+ lun->changed = 1; /* ub_revalidate clears only */
+ lun->first_open = 1;
+ ub_revalidate(sc, lun);
+
rc = -ENOMEM;
if ((disk = alloc_disk(UB_MINORS_PER_MAJOR)) == NULL)
goto err_diskalloc;
- sc->disk = disk;
- sprintf(disk->disk_name, DRV_NAME "%c", sc->id + 'a');
- sprintf(disk->devfs_name, DEVFS_NAME "/%c", sc->id + 'a');
+ lun->disk = disk;
+ sprintf(disk->disk_name, DRV_NAME "%c", lun->id + 'a');
+ sprintf(disk->devfs_name, DEVFS_NAME "/%c", lun->id + 'a');
disk->major = UB_MAJOR;
- disk->first_minor = sc->id * UB_MINORS_PER_MAJOR;
+ disk->first_minor = lun->id * UB_MINORS_PER_MAJOR;
disk->fops = &ub_bd_fops;
- disk->private_data = sc;
- disk->driverfs_dev = &intf->dev;
+ disk->private_data = lun;
+ disk->driverfs_dev = &sc->intf->dev; /* XXX Many to one ok? */
rc = -ENOMEM;
if ((q = blk_init_queue(ub_bd_rq_fn, &sc->lock)) == NULL)
@@ -2028,28 +2165,17 @@
disk->queue = q;
- // blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
+ blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
blk_queue_max_hw_segments(q, UB_MAX_REQ_SG);
blk_queue_max_phys_segments(q, UB_MAX_REQ_SG);
- // blk_queue_segment_boundary(q, CARM_SG_BOUNDARY);
+ blk_queue_segment_boundary(q, 0xffffffff); /* Dubious. */
blk_queue_max_sectors(q, UB_MAX_SECTORS);
- blk_queue_hardsect_size(q, sc->capacity.bsize);
+ blk_queue_hardsect_size(q, lun->capacity.bsize);
- /*
- * This is a serious infraction, caused by a deficiency in the
- * USB sg interface (usb_sg_wait()). We plan to remove this once
- * we get mileage on the driver and can justify a change to USB API.
- * See blk_queue_bounce_limit() to understand this part.
- *
- * XXX And I still need to be aware of the DMA mask in the HC.
- */
- q->bounce_pfn = blk_max_low_pfn;
- q->bounce_gfp = GFP_NOIO;
+ q->queuedata = lun;
- q->queuedata = sc;
-
- set_capacity(disk, sc->capacity.nsec);
- if (sc->removable)
+ set_capacity(disk, lun->capacity.nsec);
+ if (lun->removable)
disk->flags |= GENHD_FL_REMOVABLE;
add_disk(disk);
@@ -2059,22 +2185,20 @@
err_blkqinit:
put_disk(disk);
err_diskalloc:
- device_remove_file(&sc->intf->dev, &dev_attr_diag);
-err_diag:
- usb_set_intfdata(intf, NULL);
- // usb_put_intf(sc->intf);
- usb_put_dev(sc->dev);
- ub_id_put(sc->id);
+ list_del(&lun->link);
+ ub_id_put(lun->id);
err_id:
- kfree(sc);
-err_core:
+ kfree(lun);
+err_alloc:
return rc;
}
static void ub_disconnect(struct usb_interface *intf)
{
struct ub_dev *sc = usb_get_intfdata(intf);
- struct gendisk *disk = sc->disk;
+ struct list_head *p;
+ struct ub_lun *lun;
+ struct gendisk *disk;
unsigned long flags;
/*
@@ -2124,14 +2248,18 @@
/*
* Unregister the upper layer.
*/
- if (disk->flags & GENHD_FL_UP)
- del_gendisk(disk);
- /*
- * I wish I could do:
- * set_bit(QUEUE_FLAG_DEAD, &q->queue_flags);
- * As it is, we rely on our internal poisoning and let
- * the upper levels to spin furiously failing all the I/O.
- */
+ list_for_each (p, &sc->luns) {
+ lun = list_entry(p, struct ub_lun, link);
+ disk = lun->disk;
+ if (disk->flags & GENHD_FL_UP)
+ del_gendisk(disk);
+ /*
+ * I wish I could do:
+ * set_bit(QUEUE_FLAG_DEAD, &q->queue_flags);
+ * As it is, we rely on our internal poisoning and let
+ * the upper levels to spin furiously failing all the I/O.
+ */
+ }
/*
* Taking a lock on a structure which is about to be freed
@@ -2182,8 +2310,8 @@
{
int rc;
- /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu\n",
- sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev));
+ /* P3 */ printk("ub: sizeof ub_scsi_cmd %zu ub_dev %zu ub_lun %zu\n",
+ sizeof(struct ub_scsi_cmd), sizeof(struct ub_dev), sizeof(struct ub_lun));
if ((rc = register_blkdev(UB_MAJOR, DRV_NAME)) != 0)
goto err_regblkdev;
diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h
index ad9c113..c1fe013 100644
--- a/drivers/char/agp/agp.h
+++ b/drivers/char/agp/agp.h
@@ -278,6 +278,8 @@
#define AGP_GENERIC_SIZES_ENTRIES 11
extern struct aper_size_info_16 agp3_generic_sizes[];
+#define virt_to_gart(x) (phys_to_gart(virt_to_phys(x)))
+#define gart_to_virt(x) (phys_to_virt(gart_to_phys(x)))
extern int agp_off;
extern int agp_try_unsupported_boot;
diff --git a/drivers/char/agp/ali-agp.c b/drivers/char/agp/ali-agp.c
index 0212feb..9c9c9c2 100644
--- a/drivers/char/agp/ali-agp.c
+++ b/drivers/char/agp/ali-agp.c
@@ -150,7 +150,7 @@
pci_read_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL, &temp);
pci_write_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL,
(((temp & ALI_CACHE_FLUSH_ADDR_MASK) |
- virt_to_phys(addr)) | ALI_CACHE_FLUSH_EN ));
+ virt_to_gart(addr)) | ALI_CACHE_FLUSH_EN ));
return addr;
}
@@ -174,7 +174,7 @@
pci_read_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL, &temp);
pci_write_config_dword(agp_bridge->dev, ALI_CACHE_FLUSH_CTRL,
(((temp & ALI_CACHE_FLUSH_ADDR_MASK) |
- virt_to_phys(addr)) | ALI_CACHE_FLUSH_EN));
+ virt_to_gart(addr)) | ALI_CACHE_FLUSH_EN));
agp_generic_destroy_page(addr);
}
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index e62a3c2..3a41672 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -43,7 +43,7 @@
SetPageReserved(virt_to_page(page_map->real));
global_cache_flush();
- page_map->remapped = ioremap_nocache(virt_to_phys(page_map->real),
+ page_map->remapped = ioremap_nocache(virt_to_gart(page_map->real),
PAGE_SIZE);
if (page_map->remapped == NULL) {
ClearPageReserved(virt_to_page(page_map->real));
@@ -154,7 +154,7 @@
agp_bridge->gatt_table_real = (u32 *)page_dir.real;
agp_bridge->gatt_table = (u32 __iomem *)page_dir.remapped;
- agp_bridge->gatt_bus_addr = virt_to_phys(page_dir.real);
+ agp_bridge->gatt_bus_addr = virt_to_gart(page_dir.real);
/* Get the address for the gart region.
* This is a bus address even on the alpha, b/c its
@@ -167,7 +167,7 @@
/* Calculate the agp offset */
for (i = 0; i < value->num_entries / 1024; i++, addr += 0x00400000) {
- writel(virt_to_phys(amd_irongate_private.gatt_pages[i]->real) | 1,
+ writel(virt_to_gart(amd_irongate_private.gatt_pages[i]->real) | 1,
page_dir.remapped+GET_PAGE_DIR_OFF(addr));
readl(page_dir.remapped+GET_PAGE_DIR_OFF(addr)); /* PCI Posting. */
}
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 399c042..1407945 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -219,7 +219,7 @@
static int amd_8151_configure(void)
{
- unsigned long gatt_bus = virt_to_phys(agp_bridge->gatt_table_real);
+ unsigned long gatt_bus = virt_to_gart(agp_bridge->gatt_table_real);
/* Configure AGP regs in each x86-64 host bridge. */
for_each_nb() {
@@ -591,7 +591,7 @@
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
- release_mem_region(virt_to_phys(bridge->gatt_table_real),
+ release_mem_region(virt_to_gart(bridge->gatt_table_real),
amd64_aperture_sizes[bridge->aperture_size_idx].size);
agp_remove_bridge(bridge);
agp_put_bridge(bridge);
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index a65f882..e572ced 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -61,7 +61,7 @@
SetPageReserved(virt_to_page(page_map->real));
err = map_page_into_agp(virt_to_page(page_map->real));
- page_map->remapped = ioremap_nocache(virt_to_phys(page_map->real),
+ page_map->remapped = ioremap_nocache(virt_to_gart(page_map->real),
PAGE_SIZE);
if (page_map->remapped == NULL || err) {
ClearPageReserved(virt_to_page(page_map->real));
@@ -343,7 +343,7 @@
agp_bridge->gatt_table_real = (u32 *)page_dir.real;
agp_bridge->gatt_table = (u32 __iomem *) page_dir.remapped;
- agp_bridge->gatt_bus_addr = virt_to_bus(page_dir.real);
+ agp_bridge->gatt_bus_addr = virt_to_gart(page_dir.real);
/* Write out the size register */
current_size = A_SIZE_LVL2(agp_bridge->current_size);
@@ -373,7 +373,7 @@
/* Calculate the agp offset */
for(i = 0; i < value->num_entries / 1024; i++, addr += 0x00400000) {
- writel(virt_to_bus(ati_generic_private.gatt_pages[i]->real) | 1,
+ writel(virt_to_gart(ati_generic_private.gatt_pages[i]->real) | 1,
page_dir.remapped+GET_PAGE_DIR_OFF(addr));
readl(page_dir.remapped+GET_PAGE_DIR_OFF(addr)); /* PCI Posting. */
}
diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c
index 2f3dfb6..4d4e602 100644
--- a/drivers/char/agp/backend.c
+++ b/drivers/char/agp/backend.c
@@ -148,7 +148,7 @@
return -ENOMEM;
}
- bridge->scratch_page_real = virt_to_phys(addr);
+ bridge->scratch_page_real = virt_to_gart(addr);
bridge->scratch_page =
bridge->driver->mask_memory(bridge, bridge->scratch_page_real, 0);
}
@@ -189,7 +189,7 @@
err_out:
if (bridge->driver->needs_scratch_page)
bridge->driver->agp_destroy_page(
- phys_to_virt(bridge->scratch_page_real));
+ gart_to_virt(bridge->scratch_page_real));
if (got_gatt)
bridge->driver->free_gatt_table(bridge);
if (got_keylist) {
@@ -214,7 +214,7 @@
if (bridge->driver->agp_destroy_page &&
bridge->driver->needs_scratch_page)
bridge->driver->agp_destroy_page(
- phys_to_virt(bridge->scratch_page_real));
+ gart_to_virt(bridge->scratch_page_real));
}
/* When we remove the global variable agp_bridge from all drivers
diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c
index 1383c31..ac19fdc 100644
--- a/drivers/char/agp/efficeon-agp.c
+++ b/drivers/char/agp/efficeon-agp.c
@@ -219,7 +219,7 @@
efficeon_private.l1_table[index] = page;
- value = __pa(page) | pati | present | index;
+ value = virt_to_gart(page) | pati | present | index;
pci_write_config_dword(agp_bridge->dev,
EFFICEON_ATTPAGE, value);
diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c
index c321a92..f0079e9 100644
--- a/drivers/char/agp/generic.c
+++ b/drivers/char/agp/generic.c
@@ -153,7 +153,7 @@
}
if (curr->page_count != 0) {
for (i = 0; i < curr->page_count; i++) {
- curr->bridge->driver->agp_destroy_page(phys_to_virt(curr->memory[i]));
+ curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]));
}
}
agp_free_key(curr->key);
@@ -209,7 +209,7 @@
agp_free_memory(new);
return NULL;
}
- new->memory[i] = virt_to_phys(addr);
+ new->memory[i] = virt_to_gart(addr);
new->page_count++;
}
new->bridge = bridge;
@@ -295,19 +295,6 @@
EXPORT_SYMBOL_GPL(agp_num_entries);
-static int check_bridge_mode(struct pci_dev *dev)
-{
- u32 agp3;
- u8 cap_ptr;
-
- cap_ptr = pci_find_capability(dev, PCI_CAP_ID_AGP);
- pci_read_config_dword(dev, cap_ptr+AGPSTAT, &agp3);
- if (agp3 & AGPSTAT_MODE_3_0)
- return 1;
- return 0;
-}
-
-
/**
* agp_copy_info - copy bridge state information
*
@@ -328,7 +315,7 @@
info->version.minor = bridge->version->minor;
info->chipset = SUPPORTED;
info->device = bridge->dev;
- if (check_bridge_mode(bridge->dev))
+ if (bridge->mode & AGPSTAT_MODE_3_0)
info->mode = bridge->mode & ~AGP3_RESERVED_MASK;
else
info->mode = bridge->mode & ~AGP2_RESERVED_MASK;
@@ -661,7 +648,7 @@
bridge_agpstat &= ~AGPSTAT_FW;
/* Check to see if we are operating in 3.0 mode */
- if (check_bridge_mode(agp_bridge->dev))
+ if (agp_bridge->mode & AGPSTAT_MODE_3_0)
agp_v3_parse_one(&requested_mode, &bridge_agpstat, &vga_agpstat);
else
agp_v2_parse_one(&requested_mode, &bridge_agpstat, &vga_agpstat);
@@ -732,7 +719,7 @@
/* Do AGP version specific frobbing. */
if (bridge->major_version >= 3) {
- if (check_bridge_mode(bridge->dev)) {
+ if (bridge->mode & AGPSTAT_MODE_3_0) {
/* If we have 3.5, we can do the isoch stuff. */
if (bridge->minor_version >= 5)
agp_3_5_enable(bridge);
@@ -806,8 +793,7 @@
break;
}
- table = (char *) __get_free_pages(GFP_KERNEL,
- page_order);
+ table = alloc_gatt_pages(page_order);
if (table == NULL) {
i++;
@@ -838,7 +824,7 @@
size = ((struct aper_size_info_fixed *) temp)->size;
page_order = ((struct aper_size_info_fixed *) temp)->page_order;
num_entries = ((struct aper_size_info_fixed *) temp)->num_entries;
- table = (char *) __get_free_pages(GFP_KERNEL, page_order);
+ table = alloc_gatt_pages(page_order);
}
if (table == NULL)
@@ -853,7 +839,7 @@
agp_gatt_table = (void *)table;
bridge->driver->cache_flush();
- bridge->gatt_table = ioremap_nocache(virt_to_phys(table),
+ bridge->gatt_table = ioremap_nocache(virt_to_gart(table),
(PAGE_SIZE * (1 << page_order)));
bridge->driver->cache_flush();
@@ -861,11 +847,11 @@
for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
ClearPageReserved(page);
- free_pages((unsigned long) table, page_order);
+ free_gatt_pages(table, page_order);
return -ENOMEM;
}
- bridge->gatt_bus_addr = virt_to_phys(bridge->gatt_table_real);
+ bridge->gatt_bus_addr = virt_to_gart(bridge->gatt_table_real);
/* AK: bogus, should encode addresses > 4GB */
for (i = 0; i < num_entries; i++) {
@@ -919,7 +905,7 @@
for (page = virt_to_page(table); page <= virt_to_page(table_end); page++)
ClearPageReserved(page);
- free_pages((unsigned long) bridge->gatt_table_real, page_order);
+ free_gatt_pages(bridge->gatt_table_real, page_order);
agp_gatt_table = NULL;
bridge->gatt_table = NULL;
diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c
index 6052bfa..99762b6 100644
--- a/drivers/char/agp/hp-agp.c
+++ b/drivers/char/agp/hp-agp.c
@@ -110,7 +110,7 @@
hp->gart_size = HP_ZX1_GART_SIZE;
hp->gatt_entries = hp->gart_size / hp->io_page_size;
- hp->io_pdir = phys_to_virt(readq(hp->ioc_regs+HP_ZX1_PDIR_BASE));
+ hp->io_pdir = gart_to_virt(readq(hp->ioc_regs+HP_ZX1_PDIR_BASE));
hp->gatt = &hp->io_pdir[HP_ZX1_IOVA_TO_PDIR(hp->gart_base)];
if (hp->gatt[0] != HP_ZX1_SBA_IOMMU_COOKIE) {
@@ -248,7 +248,7 @@
agp_bridge->mode = readl(hp->lba_regs+hp->lba_cap_offset+PCI_AGP_STATUS);
if (hp->io_pdir_owner) {
- writel(virt_to_phys(hp->io_pdir), hp->ioc_regs+HP_ZX1_PDIR_BASE);
+ writel(virt_to_gart(hp->io_pdir), hp->ioc_regs+HP_ZX1_PDIR_BASE);
readl(hp->ioc_regs+HP_ZX1_PDIR_BASE);
writel(hp->io_tlb_ps, hp->ioc_regs+HP_ZX1_TCNFG);
readl(hp->ioc_regs+HP_ZX1_TCNFG);
diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c
index adbea89..9494329 100644
--- a/drivers/char/agp/i460-agp.c
+++ b/drivers/char/agp/i460-agp.c
@@ -372,7 +372,7 @@
}
memset(lp->alloced_map, 0, map_size);
- lp->paddr = virt_to_phys(lpage);
+ lp->paddr = virt_to_gart(lpage);
lp->refcount = 0;
atomic_add(I460_KPAGES_PER_IOPAGE, &agp_bridge->current_memory_agp);
return 0;
@@ -383,7 +383,7 @@
kfree(lp->alloced_map);
lp->alloced_map = NULL;
- free_pages((unsigned long) phys_to_virt(lp->paddr), I460_IO_PAGE_SHIFT - PAGE_SHIFT);
+ free_pages((unsigned long) gart_to_virt(lp->paddr), I460_IO_PAGE_SHIFT - PAGE_SHIFT);
atomic_sub(I460_KPAGES_PER_IOPAGE, &agp_bridge->current_memory_agp);
}
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index 8c7d727..51266d6 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -286,7 +286,7 @@
if (new == NULL)
return NULL;
- new->memory[0] = virt_to_phys(addr);
+ new->memory[0] = virt_to_gart(addr);
if (pg_count == 4) {
/* kludge to get 4 physical pages for ARGB cursor */
new->memory[1] = new->memory[0] + PAGE_SIZE;
@@ -329,10 +329,10 @@
agp_free_key(curr->key);
if(curr->type == AGP_PHYS_MEMORY) {
if (curr->page_count == 4)
- i8xx_destroy_pages(phys_to_virt(curr->memory[0]));
+ i8xx_destroy_pages(gart_to_virt(curr->memory[0]));
else
agp_bridge->driver->agp_destroy_page(
- phys_to_virt(curr->memory[0]));
+ gart_to_virt(curr->memory[0]));
vfree(curr->memory);
}
kfree(curr);
@@ -418,7 +418,8 @@
case I915_GMCH_GMS_STOLEN_48M:
/* Check it's really I915G */
if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB ||
- agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB)
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB ||
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB)
gtt_entries = MB(48) - KB(size);
else
gtt_entries = 0;
@@ -426,7 +427,8 @@
case I915_GMCH_GMS_STOLEN_64M:
/* Check it's really I915G */
if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915G_HB ||
- agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB)
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB ||
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82945G_HB)
gtt_entries = MB(64) - KB(size);
else
gtt_entries = 0;
@@ -1662,6 +1664,14 @@
}
name = "915GM";
break;
+ case PCI_DEVICE_ID_INTEL_82945G_HB:
+ if (find_i830(PCI_DEVICE_ID_INTEL_82945G_IG)) {
+ bridge->driver = &intel_915_driver;
+ } else {
+ bridge->driver = &intel_845_driver;
+ }
+ name = "945G";
+ break;
case PCI_DEVICE_ID_INTEL_7505_0:
bridge->driver = &intel_7505_driver;
name = "E7505";
@@ -1801,6 +1811,7 @@
ID(PCI_DEVICE_ID_INTEL_7205_0),
ID(PCI_DEVICE_ID_INTEL_82915G_HB),
ID(PCI_DEVICE_ID_INTEL_82915GM_HB),
+ ID(PCI_DEVICE_ID_INTEL_82945G_HB),
{ }
};
diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c
index 4b3eda2..d3aa159 100644
--- a/drivers/char/agp/sgi-agp.c
+++ b/drivers/char/agp/sgi-agp.c
@@ -133,11 +133,14 @@
off_t j;
void *temp;
struct agp_bridge_data *bridge;
+ u64 *table;
bridge = mem->bridge;
if (!bridge)
return -EINVAL;
+ table = (u64 *)bridge->gatt_table;
+
temp = bridge->current_size;
switch (bridge->driver->size_type) {
@@ -175,7 +178,7 @@
j = pg_start;
while (j < (pg_start + mem->page_count)) {
- if (*(bridge->gatt_table + j))
+ if (table[j])
return -EBUSY;
j++;
}
@@ -186,7 +189,7 @@
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
- *(bridge->gatt_table + j) =
+ table[j] =
bridge->driver->mask_memory(bridge, mem->memory[i],
mem->type);
}
@@ -200,6 +203,7 @@
{
size_t i;
struct agp_bridge_data *bridge;
+ u64 *table;
bridge = mem->bridge;
if (!bridge)
@@ -209,8 +213,10 @@
return -EINVAL;
}
+ table = (u64 *)bridge->gatt_table;
+
for (i = pg_start; i < (mem->page_count + pg_start); i++) {
- *(bridge->gatt_table + i) = 0;
+ table[i] = 0;
}
bridge->driver->tlb_flush(mem);
diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c
index 10c2330..a9fb12c 100644
--- a/drivers/char/agp/sworks-agp.c
+++ b/drivers/char/agp/sworks-agp.c
@@ -51,7 +51,7 @@
}
SetPageReserved(virt_to_page(page_map->real));
global_cache_flush();
- page_map->remapped = ioremap_nocache(virt_to_phys(page_map->real),
+ page_map->remapped = ioremap_nocache(virt_to_gart(page_map->real),
PAGE_SIZE);
if (page_map->remapped == NULL) {
ClearPageReserved(virt_to_page(page_map->real));
@@ -162,7 +162,7 @@
/* Create a fake scratch directory */
for(i = 0; i < 1024; i++) {
writel(agp_bridge->scratch_page, serverworks_private.scratch_dir.remapped+i);
- writel(virt_to_phys(serverworks_private.scratch_dir.real) | 1, page_dir.remapped+i);
+ writel(virt_to_gart(serverworks_private.scratch_dir.real) | 1, page_dir.remapped+i);
}
retval = serverworks_create_gatt_pages(value->num_entries / 1024);
@@ -174,7 +174,7 @@
agp_bridge->gatt_table_real = (u32 *)page_dir.real;
agp_bridge->gatt_table = (u32 __iomem *)page_dir.remapped;
- agp_bridge->gatt_bus_addr = virt_to_phys(page_dir.real);
+ agp_bridge->gatt_bus_addr = virt_to_gart(page_dir.real);
/* Get the address for the gart region.
* This is a bus address even on the alpha, b/c its
@@ -187,7 +187,7 @@
/* Calculate the agp offset */
for(i = 0; i < value->num_entries / 1024; i++)
- writel(virt_to_phys(serverworks_private.gatt_pages[i]->real)|1, page_dir.remapped+i);
+ writel(virt_to_gart(serverworks_private.gatt_pages[i]->real)|1, page_dir.remapped+i);
return 0;
}
diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c
index a673971..c825531 100644
--- a/drivers/char/agp/uninorth-agp.c
+++ b/drivers/char/agp/uninorth-agp.c
@@ -407,7 +407,7 @@
bridge->gatt_table_real = (u32 *) table;
bridge->gatt_table = (u32 *)table;
- bridge->gatt_bus_addr = virt_to_phys(table);
+ bridge->gatt_bus_addr = virt_to_gart(table);
for (i = 0; i < num_entries; i++)
bridge->gatt_table[i] = 0;
diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h
index 54a2914..11c6950 100644
--- a/drivers/char/drm/drm_pciids.h
+++ b/drivers/char/drm/drm_pciids.h
@@ -220,5 +220,6 @@
{0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x2582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x2592, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x2772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0, 0, 0}
diff --git a/drivers/char/drm/radeon_irq.c b/drivers/char/drm/radeon_irq.c
index 5b18bee..cd25f28 100644
--- a/drivers/char/drm/radeon_irq.c
+++ b/drivers/char/drm/radeon_irq.c
@@ -123,11 +123,6 @@
dev_priv->stats.boxes |= RADEON_BOX_WAIT_IDLE;
- /* This is a hack to work around mysterious freezes on certain
- * systems:
- */
- radeon_acknowledge_irqs( dev_priv );
-
DRM_WAIT_ON( ret, dev_priv->swi_queue, 3 * DRM_HZ,
RADEON_READ( RADEON_LAST_SWI_REG ) >= swi_nr );
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c
index 7a24506..f022f09 100644
--- a/drivers/char/mxser.c
+++ b/drivers/char/mxser.c
@@ -1995,9 +1995,6 @@
unsigned char ch, gdl;
int ignored = 0;
int cnt = 0;
- unsigned char *cp;
- char *fp;
- int count;
int recv_room;
int max = 256;
unsigned long flags;
@@ -2011,10 +2008,6 @@
//return;
}
- cp = tty->flip.char_buf;
- fp = tty->flip.flag_buf;
- count = 0;
-
// following add by Victor Yu. 09-02-2002
if (info->IsMoxaMustChipFlag != MOXA_OTHER_UART) {
@@ -2041,12 +2034,10 @@
}
while (gdl--) {
ch = inb(info->base + UART_RX);
- count++;
- *cp++ = ch;
- *fp++ = 0;
+ tty_insert_flip_char(tty, ch, 0);
cnt++;
/*
- if((count>=HI_WATER) && (info->stop_rx==0)){
+ if((cnt>=HI_WATER) && (info->stop_rx==0)){
mxser_stoprx(tty);
info->stop_rx=1;
break;
@@ -2061,7 +2052,7 @@
if (max-- < 0)
break;
/*
- if((count>=HI_WATER) && (info->stop_rx==0)){
+ if((cnt>=HI_WATER) && (info->stop_rx==0)){
mxser_stoprx(tty);
info->stop_rx=1;
break;
@@ -2078,36 +2069,33 @@
if (++ignored > 100)
break;
} else {
- count++;
+ char flag = 0;
if (*status & UART_LSR_SPECIAL) {
if (*status & UART_LSR_BI) {
- *fp++ = TTY_BREAK;
+ flag = TTY_BREAK;
/* added by casper 1/11/2000 */
info->icount.brk++;
-
/* */
if (info->flags & ASYNC_SAK)
do_SAK(tty);
} else if (*status & UART_LSR_PE) {
- *fp++ = TTY_PARITY;
+ flag = TTY_PARITY;
/* added by casper 1/11/2000 */
info->icount.parity++;
/* */
} else if (*status & UART_LSR_FE) {
- *fp++ = TTY_FRAME;
+ flag = TTY_FRAME;
/* added by casper 1/11/2000 */
info->icount.frame++;
/* */
} else if (*status & UART_LSR_OE) {
- *fp++ = TTY_OVERRUN;
+ flag = TTY_OVERRUN;
/* added by casper 1/11/2000 */
info->icount.overrun++;
/* */
- } else
- *fp++ = 0;
- } else
- *fp++ = 0;
- *cp++ = ch;
+ }
+ }
+ tty_insert_flip_char(tty, ch, flag);
cnt++;
if (cnt >= recv_room) {
if (!info->ldisc_stop_rx) {
@@ -2132,13 +2120,13 @@
// above add by Victor Yu. 09-02-2002
} while (*status & UART_LSR_DR);
- end_intr: // add by Victor Yu. 09-02-2002
+end_intr: // add by Victor Yu. 09-02-2002
mxvar_log.rxcnt[info->port] += cnt;
info->mon_data.rxcnt += cnt;
info->mon_data.up_rxcnt += cnt;
spin_unlock_irqrestore(&info->slock, flags);
-
+
tty_flip_buffer_push(tty);
}
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 00c7b95..ab82d6a 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -745,7 +745,8 @@
list_add_tail(&scsi_id->scsi_list, &hi->scsi_ids);
/* Register our host with the SCSI stack. */
- scsi_host = scsi_host_alloc(&scsi_driver_template, 0);
+ scsi_host = scsi_host_alloc(&scsi_driver_template,
+ sizeof (unsigned long));
if (!scsi_host) {
SBP2_ERR("failed to register scsi host");
goto failed_alloc;
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index af0446c..48fdf1e5 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -54,7 +54,7 @@
module_param_named(softraw, atkbd_softraw, bool, 0);
MODULE_PARM_DESC(softraw, "Use software generated rawmode");
-static int atkbd_scroll = 1;
+static int atkbd_scroll = 0;
module_param_named(scroll, atkbd_scroll, bool, 0);
MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards");
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 42a9f7f..7bf4be7 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -352,7 +352,7 @@
if (alps_get_status(psmouse, param))
return -1;
- if (param[0] & 0x04)
+ if (!(param[0] & 0x04))
alps_tap_mode(psmouse, 1);
if (alps_absolute_mode(psmouse)) {
diff --git a/drivers/macintosh/via-pmu.c b/drivers/macintosh/via-pmu.c
index bb9f404..b941ee2 100644
--- a/drivers/macintosh/via-pmu.c
+++ b/drivers/macintosh/via-pmu.c
@@ -2593,6 +2593,9 @@
/* Restore VIA */
restore_via_state();
+ /* tweak LPJ before cpufreq is there */
+ loops_per_jiffy *= 2;
+
/* Restore video */
pmac_call_early_video_resume();
@@ -2613,6 +2616,9 @@
pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
pmu_wait_complete(&req);
+ /* Restore LPJ, cpufreq will adjust the cpu frequency */
+ loops_per_jiffy /= 2;
+
pmac_wakeup_devices();
return 0;
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index 1e97b3c..0c1b852 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -985,6 +985,9 @@
if (!error)
return 0; /* I/O complete */
+ if ((error == -EWOULDBLOCK) && bio_rw_ahead(bio))
+ return error;
+
spin_lock(&m->lock);
if (!m->nr_valid_paths) {
if (!m->queue_if_no_path || m->suspended) {
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 7b74c87..4830b77 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -573,6 +573,7 @@
static void i2o_block_event(struct i2o_event *evt)
{
osm_info("block-osm: event received\n");
+ kfree(evt);
};
/*
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 1c563f9..a7f15d9 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -374,29 +374,6 @@
}
/* --------------------------------------------------------------------- */
-/*
- * high performance HDLC encoder
- * yes, it's ugly, but generates pretty good code
- */
-
-#define ENCODEITERA(j) \
-({ \
- if (!(notbitstream & (0x1f0 << j))) \
- goto stuff##j; \
- encodeend##j: ; \
-})
-
-#define ENCODEITERB(j) \
-({ \
- stuff##j: \
- bitstream &= ~(0x100 << j); \
- bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | \
- ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); \
- numbit++; \
- notbitstream = ~bitstream; \
- goto encodeend##j; \
-})
-
static void encode_hdlc(struct baycom_state *bc)
{
@@ -405,6 +382,7 @@
int pkt_len;
unsigned bitstream, notbitstream, bitbuf, numbit, crc;
unsigned char crcarr[2];
+ int j;
if (bc->hdlctx.bufcnt > 0)
return;
@@ -429,24 +407,14 @@
pkt_len--;
if (!pkt_len)
bp = crcarr;
- ENCODEITERA(0);
- ENCODEITERA(1);
- ENCODEITERA(2);
- ENCODEITERA(3);
- ENCODEITERA(4);
- ENCODEITERA(5);
- ENCODEITERA(6);
- ENCODEITERA(7);
- goto enditer;
- ENCODEITERB(0);
- ENCODEITERB(1);
- ENCODEITERB(2);
- ENCODEITERB(3);
- ENCODEITERB(4);
- ENCODEITERB(5);
- ENCODEITERB(6);
- ENCODEITERB(7);
- enditer:
+ for (j = 0; j < 8; j++)
+ if (unlikely(!(notbitstream & (0x1f0 << j)))) {
+ bitstream &= ~(0x100 << j);
+ bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) |
+ ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1);
+ numbit++;
+ notbitstream = ~bitstream;
+ }
numbit += 8;
while (numbit >= 8) {
*wp++ = bitbuf;
@@ -610,37 +578,6 @@
bc->stats.rx_packets++;
}
-#define DECODEITERA(j) \
-({ \
- if (!(notbitstream & (0x0fc << j))) /* flag or abort */ \
- goto flgabrt##j; \
- if ((bitstream & (0x1f8 << j)) == (0xf8 << j)) /* stuffed bit */ \
- goto stuff##j; \
- enditer##j: ; \
-})
-
-#define DECODEITERB(j) \
-({ \
- flgabrt##j: \
- if (!(notbitstream & (0x1fc << j))) { /* abort received */ \
- state = 0; \
- goto enditer##j; \
- } \
- if ((bitstream & (0x1fe << j)) != (0x0fc << j)) /* flag received */ \
- goto enditer##j; \
- if (state) \
- do_rxpacket(dev); \
- bc->hdlcrx.bufcnt = 0; \
- bc->hdlcrx.bufptr = bc->hdlcrx.buf; \
- state = 1; \
- numbits = 7-j; \
- goto enditer##j; \
- stuff##j: \
- numbits--; \
- bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); \
- goto enditer##j; \
-})
-
static int receive(struct net_device *dev, int cnt)
{
struct baycom_state *bc = netdev_priv(dev);
@@ -649,6 +586,7 @@
unsigned char tmp[128];
unsigned char *cp;
int cnt2, ret = 0;
+ int j;
numbits = bc->hdlcrx.numbits;
state = bc->hdlcrx.state;
@@ -669,24 +607,32 @@
bitbuf |= (*cp) << 8;
numbits += 8;
notbitstream = ~bitstream;
- DECODEITERA(0);
- DECODEITERA(1);
- DECODEITERA(2);
- DECODEITERA(3);
- DECODEITERA(4);
- DECODEITERA(5);
- DECODEITERA(6);
- DECODEITERA(7);
- goto enddec;
- DECODEITERB(0);
- DECODEITERB(1);
- DECODEITERB(2);
- DECODEITERB(3);
- DECODEITERB(4);
- DECODEITERB(5);
- DECODEITERB(6);
- DECODEITERB(7);
- enddec:
+ for (j = 0; j < 8; j++) {
+
+ /* flag or abort */
+ if (unlikely(!(notbitstream & (0x0fc << j)))) {
+
+ /* abort received */
+ if (!(notbitstream & (0x1fc << j)))
+ state = 0;
+
+ /* not flag received */
+ else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) {
+ if (state)
+ do_rxpacket(dev);
+ bc->hdlcrx.bufcnt = 0;
+ bc->hdlcrx.bufptr = bc->hdlcrx.buf;
+ state = 1;
+ numbits = 7-j;
+ }
+ }
+
+ /* stuffed bit */
+ else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) {
+ numbits--;
+ bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1);
+ }
+ }
while (state && numbits >= 8) {
if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) {
state = 0;
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index 1c553d7..ca59140 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -389,7 +389,7 @@
help
Say Y here if you want to build support for the VIA VT8231
and VIA VT1211 IrDA controllers, found on the motherboards using
- those those VIA chipsets. To use this controller, you will need
+ those VIA chipsets. To use this controller, you will need
to plug a specific 5 pins FIR IrDA dongle in the specific
motherboard connector. The driver provides support for SIR, MIR
and FIR (4Mbps) speeds.
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 13ed8dc..55af32e 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -802,13 +802,14 @@
spin_lock_irqsave(&port->pending_gate, flags);
+ if (!port->pending_lpmask) {
+ spin_unlock_irqrestore(&port->pending_gate, flags);
+ return;
+ }
+
printk(KERN_WARNING "%s: Tx timeout! Resetting lp connections: %08x\n",
dev->name, port->pending_lpmask);
- /* If we've timed out the queue must be stopped, which should
- * only ever happen when there is a pending packet. */
- WARN_ON(! port->pending_lpmask);
-
for (i = 0; i < HVMAXARCHITECTEDLPS; i++) {
struct veth_lpar_connection *cnx = veth_cnx[i];
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 41e5171..c6e8b25 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -1274,6 +1274,9 @@
spin_lock_irqsave(&lp->window_lock, flags);
update_stats(dev);
spin_unlock_irqrestore(&lp->window_lock, flags);
+
+ /* force interrupts off */
+ outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
}
link->open--;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index c59507f..d6d0e43 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -415,7 +415,7 @@
struct work_struct task;
};
-MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@oss.sgi.com>");
+MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>");
MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver");
module_param_array(media, int, &num_media, 0);
module_param(rx_copybreak, int, 0);
@@ -1585,8 +1585,8 @@
RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb);
RTL_W8(EarlyTxThres, EarlyTxThld);
- /* For gigabit rtl8169, MTU + header + CRC + VLAN */
- RTL_W16(RxMaxSize, tp->rx_buf_sz);
+ /* Low hurts. Let's disable the filtering. */
+ RTL_W16(RxMaxSize, 16383);
/* Set Rx Config register */
i = rtl8169_rx_config |
@@ -2127,6 +2127,11 @@
}
}
+static inline int rtl8169_fragmented_frame(u32 status)
+{
+ return (status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag);
+}
+
static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc)
{
u32 opts1 = le32_to_cpu(desc->opts1);
@@ -2177,27 +2182,41 @@
while (rx_left > 0) {
unsigned int entry = cur_rx % NUM_RX_DESC;
+ struct RxDesc *desc = tp->RxDescArray + entry;
u32 status;
rmb();
- status = le32_to_cpu(tp->RxDescArray[entry].opts1);
+ status = le32_to_cpu(desc->opts1);
if (status & DescOwn)
break;
if (status & RxRES) {
- printk(KERN_INFO "%s: Rx ERROR!!!\n", dev->name);
+ printk(KERN_INFO "%s: Rx ERROR. status = %08x\n",
+ dev->name, status);
tp->stats.rx_errors++;
if (status & (RxRWT | RxRUNT))
tp->stats.rx_length_errors++;
if (status & RxCRC)
tp->stats.rx_crc_errors++;
+ rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
} else {
- struct RxDesc *desc = tp->RxDescArray + entry;
struct sk_buff *skb = tp->Rx_skbuff[entry];
int pkt_size = (status & 0x00001FFF) - 4;
void (*pci_action)(struct pci_dev *, dma_addr_t,
size_t, int) = pci_dma_sync_single_for_device;
+ /*
+ * The driver does not support incoming fragmented
+ * frames. They are seen as a symptom of over-mtu
+ * sized frames.
+ */
+ if (unlikely(rtl8169_fragmented_frame(status))) {
+ tp->stats.rx_dropped++;
+ tp->stats.rx_length_errors++;
+ rtl8169_mark_to_asic(desc, tp->rx_buf_sz);
+ goto move_on;
+ }
+
rtl8169_rx_csum(skb, desc);
pci_dma_sync_single_for_cpu(tp->pci_dev,
@@ -2224,7 +2243,7 @@
tp->stats.rx_bytes += pkt_size;
tp->stats.rx_packets++;
}
-
+move_on:
cur_rx++;
rx_left--;
}
diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c
index e68cf5f..20edeb3 100644
--- a/drivers/net/shaper.c
+++ b/drivers/net/shaper.c
@@ -100,35 +100,8 @@
#define SHAPER_BANNER "CymruNet Traffic Shaper BETA 0.04 for Linux 2.1\n"
-/*
- * Locking
- */
-
-static int shaper_lock(struct shaper *sh)
-{
- /*
- * Lock in an interrupt must fail
- */
- while (test_and_set_bit(0, &sh->locked))
- {
- if (!in_interrupt())
- sleep_on(&sh->wait_queue);
- else
- return 0;
-
- }
- return 1;
-}
-
static void shaper_kick(struct shaper *sh);
-static void shaper_unlock(struct shaper *sh)
-{
- clear_bit(0, &sh->locked);
- wake_up(&sh->wait_queue);
- shaper_kick(sh);
-}
-
/*
* Compute clocks on a buffer
*/
@@ -157,17 +130,15 @@
* Throw a frame at a shaper.
*/
-static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb)
+
+static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
+ struct shaper *shaper = dev->priv;
struct sk_buff *ptr;
- /*
- * Get ready to work on this shaper. Lock may fail if its
- * an interrupt and locked.
- */
-
- if(!shaper_lock(shaper))
- return -1;
+ if (down_trylock(&shaper->sem))
+ return -1;
+
ptr=shaper->sendq.prev;
/*
@@ -260,7 +231,8 @@
dev_kfree_skb(ptr);
shaper->stats.collisions++;
}
- shaper_unlock(shaper);
+ shaper_kick(shaper);
+ up(&shaper->sem);
return 0;
}
@@ -297,8 +269,13 @@
static void shaper_timer(unsigned long data)
{
- struct shaper *sh=(struct shaper *)data;
- shaper_kick(sh);
+ struct shaper *shaper = (struct shaper *)data;
+
+ if (!down_trylock(&shaper->sem)) {
+ shaper_kick(shaper);
+ up(&shaper->sem);
+ } else
+ mod_timer(&shaper->timer, jiffies);
}
/*
@@ -311,19 +288,6 @@
struct sk_buff *skb;
/*
- * Shaper unlock will kick
- */
-
- if (test_and_set_bit(0, &shaper->locked))
- {
- if(sh_debug)
- printk("Shaper locked.\n");
- mod_timer(&shaper->timer, jiffies);
- return;
- }
-
-
- /*
* Walk the list (may be empty)
*/
@@ -364,8 +328,6 @@
if(skb!=NULL)
mod_timer(&shaper->timer, SHAPERCB(skb)->shapeclock);
-
- clear_bit(0, &shaper->locked);
}
@@ -376,14 +338,12 @@
static void shaper_flush(struct shaper *shaper)
{
struct sk_buff *skb;
- if(!shaper_lock(shaper))
- {
- printk(KERN_ERR "shaper: shaper_flush() called by an irq!\n");
- return;
- }
+
+ down(&shaper->sem);
while((skb=skb_dequeue(&shaper->sendq))!=NULL)
dev_kfree_skb(skb);
- shaper_unlock(shaper);
+ shaper_kick(shaper);
+ up(&shaper->sem);
}
/*
@@ -426,13 +386,6 @@
* ARP and other resolutions and not before.
*/
-
-static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct shaper *sh=dev->priv;
- return shaper_qframe(sh, skb);
-}
-
static struct net_device_stats *shaper_get_stats(struct net_device *dev)
{
struct shaper *sh=dev->priv;
@@ -623,7 +576,6 @@
init_timer(&sh->timer);
sh->timer.function=shaper_timer;
sh->timer.data=(unsigned long)sh;
- init_waitqueue_head(&sh->wait_queue);
}
/*
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index fc9b5cd..a0b8848 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -7,7 +7,12 @@
* Copyright (C) 2005 Broadcom Corporation.
*
* Firmware is:
- * Copyright (C) 2000-2003 Broadcom Corporation.
+ * Derived from proprietary unpublished source code,
+ * Copyright (C) 2000-2003 Broadcom Corporation.
+ *
+ * Permission is hereby granted for the distribution of this firmware
+ * data in hexadecimal or equivalent format, provided this copyright
+ * notice is accompanying it.
*/
#include <linux/config.h>
@@ -61,8 +66,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.29"
-#define DRV_MODULE_RELDATE "May 23, 2005"
+#define DRV_MODULE_VERSION "3.31"
+#define DRV_MODULE_RELDATE "June 8, 2005"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -8555,6 +8560,16 @@
case NIC_SRAM_DATA_CFG_LED_MODE_MAC:
tp->led_ctrl = LED_CTRL_MODE_MAC;
+
+ /* Default to PHY_1_MODE if 0 (MAC_MODE) is
+ * read on some older 5700/5701 bootcode.
+ */
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
+ ASIC_REV_5700 ||
+ GET_ASIC_REV(tp->pci_chip_rev_id) ==
+ ASIC_REV_5701)
+ tp->led_ctrl = LED_CTRL_MODE_PHY_1;
+
break;
case SHASTA_EXT_LED_SHARED:
@@ -9680,10 +9695,24 @@
}
if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) !=
DMA_RWCTRL_WRITE_BNDRY_16) {
+ static struct pci_device_id dma_wait_state_chipsets[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_APPLE,
+ PCI_DEVICE_ID_APPLE_UNI_N_PCI15) },
+ { },
+ };
+
/* DMA test passed without adjusting DMA boundary,
- * just restore the calculated DMA boundary
+ * now look for chipsets that are known to expose the
+ * DMA bug without failing the test.
*/
- tp->dma_rwctrl = saved_dma_rwctrl;
+ if (pci_dev_present(dma_wait_state_chipsets)) {
+ tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK;
+ tp->dma_rwctrl |= DMA_RWCTRL_WRITE_BNDRY_16;
+ }
+ else
+ /* Safe to use the calculated DMA boundary. */
+ tp->dma_rwctrl = saved_dma_rwctrl;
+
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
}
diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c
index 8132d94..30af105 100644
--- a/drivers/pci/hotplug/cpci_hotplug_core.c
+++ b/drivers/pci/hotplug/cpci_hotplug_core.c
@@ -217,6 +217,8 @@
kfree(slot->hotplug_slot->info);
kfree(slot->hotplug_slot->name);
kfree(slot->hotplug_slot);
+ if (slot->dev)
+ pci_dev_put(slot->dev);
kfree(slot);
}
diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c
index c878028..225b5e5 100644
--- a/drivers/pci/hotplug/cpci_hotplug_pci.c
+++ b/drivers/pci/hotplug/cpci_hotplug_pci.c
@@ -315,9 +315,12 @@
PCI_DEVFN(PCI_SLOT(slot->devfn), i));
if (dev) {
pci_remove_bus_device(dev);
- slot->dev = NULL;
+ pci_dev_put(dev);
}
}
+ pci_dev_put(slot->dev);
+ slot->dev = NULL;
+
dbg("%s - exit", __FUNCTION__);
return 0;
}
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index fe98553..f315df2 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -393,7 +393,10 @@
drv->driver.bus = &pci_bus_type;
drv->driver.probe = pci_device_probe;
drv->driver.remove = pci_device_remove;
- drv->driver.shutdown = pci_device_shutdown,
+ /* FIXME, once all of the existing PCI drivers have been fixed to set
+ * the pci shutdown function, this test can go away. */
+ if (!drv->driver.shutdown)
+ drv->driver.shutdown = pci_device_shutdown,
drv->driver.owner = drv->owner;
drv->driver.kobj.ktype = &pci_driver_kobj_type;
pci_init_dynids(&drv->dynids);
diff --git a/drivers/pci/pci.ids b/drivers/pci/pci.ids
index 93481b4..1d2ef1e 100644
--- a/drivers/pci/pci.ids
+++ b/drivers/pci/pci.ids
@@ -7173,6 +7173,7 @@
080f Sentry5 DDR/SDR RAM Controller
0811 Sentry5 External Interface Core
0816 BCM3302 Sentry5 MIPS32 CPU
+ 1600 NetXtreme BCM5752 Gigabit Ethernet PCI Express
1644 NetXtreme BCM5700 Gigabit Ethernet
1014 0277 Broadcom Vigil B5700 1000Base-T
1028 00d1 Broadcom BCM5700
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index b7ae878..fd48b20 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -125,7 +125,7 @@
/*
* Find the extent of a PCI decode..
*/
-static u32 pci_size(u32 base, u32 maxbase, unsigned long mask)
+static u32 pci_size(u32 base, u32 maxbase, u32 mask)
{
u32 size = mask & maxbase; /* Find the significant bits */
if (!size)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 637e949..968033f 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -456,21 +456,16 @@
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_APIC, quirk_amd_8131_ioapic );
+static void __init quirk_svw_msi(struct pci_dev *dev)
+{
+ pci_msi_quirk = 1;
+ printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n");
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_svw_msi );
#endif /* CONFIG_X86_IO_APIC */
/*
- * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip
- * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
- * when written, it makes an internal connection to the PIC.
- * For these devices, this register is defined to be 4 bits wide.
- * Normally this is fine. However for IO-APIC motherboards, or
- * non-x86 architectures (yes Via exists on PPC among other places),
- * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
- * interrupts delivered properly.
- */
-
-/*
* FIXME: it is questionable that quirk_via_acpi
* is needed. It shows up as an ISA bridge, and does not
* support the PCI_INTERRUPT_LINE register at all. Therefore
@@ -492,28 +487,30 @@
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi );
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi );
-static void quirk_via_irqpic(struct pci_dev *dev)
+/*
+ * Via 686A/B: The PCI_INTERRUPT_LINE register for the on-chip
+ * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
+ * when written, it makes an internal connection to the PIC.
+ * For these devices, this register is defined to be 4 bits wide.
+ * Normally this is fine. However for IO-APIC motherboards, or
+ * non-x86 architectures (yes Via exists on PPC among other places),
+ * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
+ * interrupts delivered properly.
+ */
+static void quirk_via_irq(struct pci_dev *dev)
{
u8 irq, new_irq;
-#ifdef CONFIG_X86_IO_APIC
- if (nr_ioapics && !skip_ioapic_setup)
- return;
-#endif
-#ifdef CONFIG_ACPI
- if (acpi_irq_model != ACPI_IRQ_MODEL_PIC)
- return;
-#endif
new_irq = dev->irq & 0xf;
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
if (new_irq != irq) {
- printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n",
+ printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
pci_name(dev), irq, new_irq);
udelay(15); /* unknown if delay really needed */
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
}
}
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
/*
* PIIX3 USB: We have to disable USB interrupts that are
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 1811cb2..27fec8a 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1752,7 +1752,7 @@
config SUN3_SCSI
tristate "Sun3 NCR5380 SCSI"
- depends on SUN3 && SCSI
+ depends on SUN3 && SCSI && BROKEN
help
This option will enable support for the OBIO (onboard io) NCR5380
SCSI controller found in the Sun 3/50 and 3/60, as well as for
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 54c5234..3be5464 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -665,15 +665,6 @@
return ata_pci_init_one(pdev, port_info, n_ports);
}
-/**
- * piix_init -
- *
- * LOCKING:
- *
- * RETURNS:
- *
- */
-
static int __init piix_init(void)
{
int rc;
@@ -689,13 +680,6 @@
return 0;
}
-/**
- * piix_exit -
- *
- * LOCKING:
- *
- */
-
static void __exit piix_exit(void)
{
pci_unregister_driver(&piix_pci_driver);
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 30a88f0..9e58f13 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -186,6 +186,28 @@
ata_wait_idle(ap);
}
+
+/**
+ * ata_tf_load - send taskfile registers to host controller
+ * @ap: Port to which output is sent
+ * @tf: ATA taskfile register set
+ *
+ * Outputs ATA taskfile to standard ATA host controller using MMIO
+ * or PIO as indicated by the ATA_FLAG_MMIO flag.
+ * Writes the control, feature, nsect, lbal, lbam, and lbah registers.
+ * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
+ * hob_lbal, hob_lbam, and hob_lbah.
+ *
+ * This function waits for idle (!BUSY and !DRQ) after writing
+ * registers. If the control register has a new value, this
+ * function also waits for idle after writing control and before
+ * writing the remaining registers.
+ *
+ * May be used as the tf_load() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
void ata_tf_load(struct ata_port *ap, struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
@@ -195,11 +217,11 @@
}
/**
- * ata_exec_command - issue ATA command to host controller
+ * ata_exec_command_pio - issue ATA command to host controller
* @ap: port to which command is being issued
* @tf: ATA taskfile register set
*
- * Issues PIO/MMIO write to ATA command register, with proper
+ * Issues PIO write to ATA command register, with proper
* synchronization with interrupt handler / other threads.
*
* LOCKING:
@@ -235,6 +257,18 @@
ata_pause(ap);
}
+
+/**
+ * ata_exec_command - issue ATA command to host controller
+ * @ap: port to which command is being issued
+ * @tf: ATA taskfile register set
+ *
+ * Issues PIO/MMIO write to ATA command register, with proper
+ * synchronization with interrupt handler / other threads.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
void ata_exec_command(struct ata_port *ap, struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
@@ -305,7 +339,7 @@
}
/**
- * ata_tf_read - input device's ATA taskfile shadow registers
+ * ata_tf_read_pio - input device's ATA taskfile shadow registers
* @ap: Port from which input is read
* @tf: ATA taskfile register set for storing input
*
@@ -368,6 +402,23 @@
}
}
+
+/**
+ * ata_tf_read - input device's ATA taskfile shadow registers
+ * @ap: Port from which input is read
+ * @tf: ATA taskfile register set for storing input
+ *
+ * Reads ATA taskfile registers for currently-selected device
+ * into @tf.
+ *
+ * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48
+ * is set, also reads the hob registers.
+ *
+ * May be used as the tf_read() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
{
if (ap->flags & ATA_FLAG_MMIO)
@@ -381,7 +432,7 @@
* @ap: port where the device is
*
* Reads ATA taskfile status register for currently-selected device
- * and return it's value. This also clears pending interrupts
+ * and return its value. This also clears pending interrupts
* from this device
*
* LOCKING:
@@ -397,7 +448,7 @@
* @ap: port where the device is
*
* Reads ATA taskfile status register for currently-selected device
- * via MMIO and return it's value. This also clears pending interrupts
+ * via MMIO and return its value. This also clears pending interrupts
* from this device
*
* LOCKING:
@@ -408,6 +459,20 @@
return readb((void __iomem *) ap->ioaddr.status_addr);
}
+
+/**
+ * ata_check_status - Read device status reg & clear interrupt
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile status register for currently-selected device
+ * and return its value. This also clears pending interrupts
+ * from this device
+ *
+ * May be used as the check_status() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
u8 ata_check_status(struct ata_port *ap)
{
if (ap->flags & ATA_FLAG_MMIO)
@@ -415,6 +480,20 @@
return ata_check_status_pio(ap);
}
+
+/**
+ * ata_altstatus - Read device alternate status reg
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile alternate status register for
+ * currently-selected device and return its value.
+ *
+ * Note: may NOT be used as the check_altstatus() entry in
+ * ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
u8 ata_altstatus(struct ata_port *ap)
{
if (ap->ops->check_altstatus)
@@ -425,6 +504,20 @@
return inb(ap->ioaddr.altstatus_addr);
}
+
+/**
+ * ata_chk_err - Read device error reg
+ * @ap: port where the device is
+ *
+ * Reads ATA taskfile error register for
+ * currently-selected device and return its value.
+ *
+ * Note: may NOT be used as the check_err() entry in
+ * ata_port_operations.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
u8 ata_chk_err(struct ata_port *ap)
{
if (ap->ops->check_err)
@@ -873,10 +966,24 @@
}
}
+
+/**
+ * ata_noop_dev_select - Select device 0/1 on ATA bus
+ * @ap: ATA channel to manipulate
+ * @device: ATA device (numbered from zero) to select
+ *
+ * This function performs no actual function.
+ *
+ * May be used as the dev_select() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * caller.
+ */
void ata_noop_dev_select (struct ata_port *ap, unsigned int device)
{
}
+
/**
* ata_std_dev_select - Select device 0/1 on ATA bus
* @ap: ATA channel to manipulate
@@ -884,7 +991,9 @@
*
* Use the method defined in the ATA specification to
* make either device 0, or device 1, active on the
- * ATA channel.
+ * ATA channel. Works with both PIO and MMIO.
+ *
+ * May be used as the dev_select() entry in ata_port_operations.
*
* LOCKING:
* caller.
@@ -1190,7 +1299,12 @@
* ata_bus_probe - Reset and probe ATA bus
* @ap: Bus to probe
*
+ * Master ATA bus probing function. Initiates a hardware-dependent
+ * bus reset, then attempts to identify any devices found on
+ * the bus.
+ *
* LOCKING:
+ * PCI/etc. bus probe sem.
*
* RETURNS:
* Zero on success, non-zero on error.
@@ -1229,10 +1343,14 @@
}
/**
- * ata_port_probe -
- * @ap:
+ * ata_port_probe - Mark port as enabled
+ * @ap: Port for which we indicate enablement
*
- * LOCKING:
+ * Modify @ap data structure such that the system
+ * thinks that the entire port is enabled.
+ *
+ * LOCKING: host_set lock, or some other form of
+ * serialization.
*/
void ata_port_probe(struct ata_port *ap)
@@ -1241,10 +1359,15 @@
}
/**
- * __sata_phy_reset -
- * @ap:
+ * __sata_phy_reset - Wake/reset a low-level SATA PHY
+ * @ap: SATA port associated with target SATA PHY.
+ *
+ * This function issues commands to standard SATA Sxxx
+ * PHY registers, to wake up the phy (and device), and
+ * clear any reset condition.
*
* LOCKING:
+ * PCI/etc. bus probe sem.
*
*/
void __sata_phy_reset(struct ata_port *ap)
@@ -1289,10 +1412,14 @@
}
/**
- * __sata_phy_reset -
- * @ap:
+ * sata_phy_reset - Reset SATA bus.
+ * @ap: SATA port associated with target SATA PHY.
+ *
+ * This function resets the SATA bus, and then probes
+ * the bus for devices.
*
* LOCKING:
+ * PCI/etc. bus probe sem.
*
*/
void sata_phy_reset(struct ata_port *ap)
@@ -1304,10 +1431,16 @@
}
/**
- * ata_port_disable -
- * @ap:
+ * ata_port_disable - Disable port.
+ * @ap: Port to be disabled.
*
- * LOCKING:
+ * Modify @ap data structure such that the system
+ * thinks that the entire port is disabled, and should
+ * never attempt to probe or communicate with devices
+ * on this port.
+ *
+ * LOCKING: host_set lock, or some other form of
+ * serialization.
*/
void ata_port_disable(struct ata_port *ap)
@@ -1416,7 +1549,10 @@
* ata_set_mode - Program timings and issue SET FEATURES - XFER
* @ap: port on which timings will be programmed
*
+ * Set ATA device disk transfer mode (PIO3, UDMA6, etc.).
+ *
* LOCKING:
+ * PCI/etc. bus probe sem.
*
*/
static void ata_set_mode(struct ata_port *ap)
@@ -1467,7 +1603,10 @@
* @tmout_pat: impatience timeout
* @tmout: overall timeout
*
- * LOCKING:
+ * Sleep until ATA Status register bit BSY clears,
+ * or a timeout occurs.
+ *
+ * LOCKING: None.
*
*/
@@ -1553,10 +1692,14 @@
}
/**
- * ata_bus_edd -
- * @ap:
+ * ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command.
+ * @ap: Port to reset and probe
+ *
+ * Use the EXECUTE DEVICE DIAGNOSTIC command to reset and
+ * probe the bus. Not often used these days.
*
* LOCKING:
+ * PCI/etc. bus probe sem.
*
*/
@@ -1633,8 +1776,8 @@
* the device is ATA or ATAPI.
*
* LOCKING:
- * Inherited from caller. Some functions called by this function
- * obtain the host_set lock.
+ * PCI/etc. bus probe sem.
+ * Obtains host_set lock.
*
* SIDE EFFECTS:
* Sets ATA_FLAG_PORT_DISABLED if bus reset fails.
@@ -1876,7 +2019,11 @@
* @xfer_mode_out: (output) SET FEATURES - XFER MODE code
* @xfer_shift_out: (output) bit shift that selects this mode
*
+ * Based on host and device capabilities, determine the
+ * maximum transfer mode that is amenable to all.
+ *
* LOCKING:
+ * PCI/etc. bus probe sem.
*
* RETURNS:
* Zero on success, negative on error.
@@ -1909,7 +2056,11 @@
* @ap: Port associated with device @dev
* @dev: Device to which command will be sent
*
+ * Issue SET FEATURES - XFER MODE command to device @dev
+ * on port @ap.
+ *
* LOCKING:
+ * PCI/etc. bus probe sem.
*/
static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev)
@@ -1947,10 +2098,13 @@
}
/**
- * ata_sg_clean -
- * @qc:
+ * ata_sg_clean - Unmap DMA memory associated with command
+ * @qc: Command containing DMA memory to be released
+ *
+ * Unmap all mapped DMA memory associated with this command.
*
* LOCKING:
+ * spin_lock_irqsave(host_set lock)
*/
static void ata_sg_clean(struct ata_queued_cmd *qc)
@@ -1981,7 +2135,11 @@
* ata_fill_sg - Fill PCI IDE PRD table
* @qc: Metadata associated with taskfile to be transferred
*
+ * Fill PCI IDE PRD (scatter-gather) table with segments
+ * associated with the current disk command.
+ *
* LOCKING:
+ * spin_lock_irqsave(host_set lock)
*
*/
static void ata_fill_sg(struct ata_queued_cmd *qc)
@@ -2028,7 +2186,13 @@
* ata_check_atapi_dma - Check whether ATAPI DMA can be supported
* @qc: Metadata associated with taskfile to check
*
+ * Allow low-level driver to filter ATA PACKET commands, returning
+ * a status indicating whether or not it is OK to use DMA for the
+ * supplied PACKET command.
+ *
* LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ *
* RETURNS: 0 when ATAPI DMA can be used
* nonzero otherwise
*/
@@ -2046,6 +2210,8 @@
* ata_qc_prep - Prepare taskfile for submission
* @qc: Metadata associated with taskfile to be prepared
*
+ * Prepare ATA taskfile for submission.
+ *
* LOCKING:
* spin_lock_irqsave(host_set lock)
*/
@@ -2057,6 +2223,32 @@
ata_fill_sg(qc);
}
+/**
+ * ata_sg_init_one - Associate command with memory buffer
+ * @qc: Command to be associated
+ * @buf: Memory buffer
+ * @buflen: Length of memory buffer, in bytes.
+ *
+ * Initialize the data-related elements of queued_cmd @qc
+ * to point to a single memory buffer, @buf of byte length @buflen.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+
+
+/**
+ * ata_sg_init_one - Prepare a one-entry scatter-gather list.
+ * @qc: Queued command
+ * @buf: transfer buffer
+ * @buflen: length of buf
+ *
+ * Builds a single-entry scatter-gather list to initiate a
+ * transfer utilizing the specified buffer.
+ *
+ * LOCKING:
+ */
void ata_sg_init_one(struct ata_queued_cmd *qc, void *buf, unsigned int buflen)
{
struct scatterlist *sg;
@@ -2074,6 +2266,32 @@
sg->length = buflen;
}
+/**
+ * ata_sg_init - Associate command with scatter-gather table.
+ * @qc: Command to be associated
+ * @sg: Scatter-gather table.
+ * @n_elem: Number of elements in s/g table.
+ *
+ * Initialize the data-related elements of queued_cmd @qc
+ * to point to a scatter-gather table @sg, containing @n_elem
+ * elements.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
+
+/**
+ * ata_sg_init - Assign a scatter gather list to a queued command
+ * @qc: Queued command
+ * @sg: Scatter-gather list
+ * @n_elem: length of sg list
+ *
+ * Attaches a scatter-gather list to a queued command.
+ *
+ * LOCKING:
+ */
+
void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem)
{
@@ -2083,14 +2301,16 @@
}
/**
- * ata_sg_setup_one -
- * @qc:
+ * ata_sg_setup_one - DMA-map the memory buffer associated with a command.
+ * @qc: Command with memory buffer to be mapped.
+ *
+ * DMA-map the memory buffer associated with queued_cmd @qc.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
* RETURNS:
- *
+ * Zero on success, negative on error.
*/
static int ata_sg_setup_one(struct ata_queued_cmd *qc)
@@ -2115,13 +2335,16 @@
}
/**
- * ata_sg_setup -
- * @qc:
+ * ata_sg_setup - DMA-map the scatter-gather table associated with a command.
+ * @qc: Command with scatter-gather table to be mapped.
+ *
+ * DMA-map the scatter-gather table associated with queued_cmd @qc.
*
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
* RETURNS:
+ * Zero on success, negative on error.
*
*/
@@ -2151,6 +2374,7 @@
* @ap:
*
* LOCKING:
+ * None. (executing in kernel thread context)
*
* RETURNS:
*
@@ -2198,6 +2422,7 @@
* @ap:
*
* LOCKING:
+ * None. (executing in kernel thread context)
*/
static void ata_pio_complete (struct ata_port *ap)
@@ -2240,6 +2465,18 @@
ata_qc_complete(qc, drv_stat);
}
+
+/**
+ * swap_buf_le16 -
+ * @buf: Buffer to swap
+ * @buf_words: Number of 16-bit words in buffer.
+ *
+ * Swap halves of 16-bit words if needed to convert from
+ * little-endian byte order to native cpu byte order, or
+ * vice-versa.
+ *
+ * LOCKING:
+ */
void swap_buf_le16(u16 *buf, unsigned int buf_words)
{
#ifdef __BIG_ENDIAN
@@ -2340,7 +2577,6 @@
next_sg:
sg = &qc->sg[qc->cursg];
-next_page:
page = sg->page;
offset = sg->offset + qc->cursg_ofs;
@@ -2348,6 +2584,7 @@
page = nth_page(page, (offset >> PAGE_SHIFT));
offset %= PAGE_SIZE;
+ /* don't overrun current sg */
count = min(sg->length - qc->cursg_ofs, bytes);
/* don't cross page boundaries */
@@ -2372,8 +2609,6 @@
kunmap(page);
if (bytes) {
- if (qc->cursg_ofs < sg->length)
- goto next_page;
goto next_sg;
}
}
@@ -2415,6 +2650,7 @@
* @ap:
*
* LOCKING:
+ * None. (executing in kernel thread context)
*/
static void ata_pio_block(struct ata_port *ap)
@@ -2583,6 +2819,7 @@
* transaction completed successfully.
*
* LOCKING:
+ * Inherited from SCSI layer (none, can sleep)
*/
static void ata_qc_timeout(struct ata_queued_cmd *qc)
@@ -2692,6 +2929,7 @@
* @dev: Device from whom we request an available command structure
*
* LOCKING:
+ * None.
*/
static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
@@ -2717,6 +2955,7 @@
* @dev: Device from whom we request an available command structure
*
* LOCKING:
+ * None.
*/
struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
@@ -2781,6 +3020,7 @@
* in case something prevents using it.
*
* LOCKING:
+ * spin_lock_irqsave(host_set lock)
*
*/
void ata_qc_free(struct ata_queued_cmd *qc)
@@ -2794,9 +3034,13 @@
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
- * @drv_stat: ATA status register contents
+ * @drv_stat: ATA Status register contents
+ *
+ * Indicate to the mid and upper layers that an ATA
+ * command has completed, with either an ok or not-ok status.
*
* LOCKING:
+ * spin_lock_irqsave(host_set lock)
*
*/
@@ -2892,6 +3136,7 @@
return -1;
}
+
/**
* ata_qc_issue_prot - issue taskfile to device in proto-dependent manner
* @qc: command to issue to device
@@ -2901,6 +3146,8 @@
* classes called "protocols", and issuing each type of protocol
* is slightly different.
*
+ * May be used as the qc_issue() entry in ata_port_operations.
+ *
* LOCKING:
* spin_lock_irqsave(host_set lock)
*
@@ -2958,7 +3205,7 @@
}
/**
- * ata_bmdma_setup - Set up PCI IDE BMDMA transaction
+ * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction
* @qc: Info associated with this ATA transaction.
*
* LOCKING:
@@ -3065,6 +3312,18 @@
ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
}
+
+/**
+ * ata_bmdma_start - Start a PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * Writes the ATA_DMA_START flag to the DMA command register.
+ *
+ * May be used as the bmdma_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
void ata_bmdma_start(struct ata_queued_cmd *qc)
{
if (qc->ap->flags & ATA_FLAG_MMIO)
@@ -3073,6 +3332,20 @@
ata_bmdma_start_pio(qc);
}
+
+/**
+ * ata_bmdma_setup - Set up PCI IDE BMDMA transaction
+ * @qc: Info associated with this ATA transaction.
+ *
+ * Writes address of PRD table to device's PRD Table Address
+ * register, sets the DMA control register, and calls
+ * ops->exec_command() to start the transfer.
+ *
+ * May be used as the bmdma_setup() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
void ata_bmdma_setup(struct ata_queued_cmd *qc)
{
if (qc->ap->flags & ATA_FLAG_MMIO)
@@ -3081,6 +3354,19 @@
ata_bmdma_setup_pio(qc);
}
+
+/**
+ * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Clear interrupt and error flags in DMA status register.
+ *
+ * May be used as the irq_clear() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
void ata_bmdma_irq_clear(struct ata_port *ap)
{
if (ap->flags & ATA_FLAG_MMIO) {
@@ -3093,6 +3379,19 @@
}
+
+/**
+ * ata_bmdma_status - Read PCI IDE BMDMA status
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Read and return BMDMA status register.
+ *
+ * May be used as the bmdma_status() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
u8 ata_bmdma_status(struct ata_port *ap)
{
u8 host_stat;
@@ -3104,6 +3403,19 @@
return host_stat;
}
+
+/**
+ * ata_bmdma_stop - Stop PCI IDE BMDMA transfer
+ * @ap: Port associated with this ATA transaction.
+ *
+ * Clears the ATA_DMA_START flag in the dma control register
+ *
+ * May be used as the bmdma_stop() entry in ata_port_operations.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+
void ata_bmdma_stop(struct ata_port *ap)
{
if (ap->flags & ATA_FLAG_MMIO) {
@@ -3203,13 +3515,18 @@
/**
* ata_interrupt - Default ATA host interrupt handler
- * @irq: irq line
- * @dev_instance: pointer to our host information structure
+ * @irq: irq line (unused)
+ * @dev_instance: pointer to our ata_host_set information structure
* @regs: unused
*
+ * Default interrupt handler for PCI IDE devices. Calls
+ * ata_host_intr() for each port that is not disabled.
+ *
* LOCKING:
+ * Obtains host_set lock during operation.
*
* RETURNS:
+ * IRQ_NONE or IRQ_HANDLED.
*
*/
@@ -3302,6 +3619,19 @@
ata_qc_complete(qc, ATA_ERR);
}
+
+/**
+ * ata_port_start - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table.
+ *
+ * May be used as the port_start() entry in ata_port_operations.
+ *
+ * LOCKING:
+ */
+
int ata_port_start (struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
@@ -3315,6 +3645,18 @@
return 0;
}
+
+/**
+ * ata_port_stop - Undo ata_port_start()
+ * @ap: Port to shut down
+ *
+ * Frees the PRD table.
+ *
+ * May be used as the port_stop() entry in ata_port_operations.
+ *
+ * LOCKING:
+ */
+
void ata_port_stop (struct ata_port *ap)
{
struct device *dev = ap->host_set->dev;
@@ -3357,7 +3699,11 @@
* @ent: Probe information provided by low-level driver
* @port_no: Port number associated with this ata_port
*
+ * Initialize a new ata_port structure, and its associated
+ * scsi_host.
+ *
* LOCKING:
+ * Inherited from caller.
*
*/
@@ -3412,9 +3758,13 @@
* @host_set: Collections of ports to which we add
* @port_no: Port number associated with this host
*
+ * Attach low-level ATA driver to system.
+ *
* LOCKING:
+ * PCI/etc. bus probe sem.
*
* RETURNS:
+ * New ata_port on success, for NULL on error.
*
*/
@@ -3447,12 +3797,22 @@
}
/**
- * ata_device_add -
- * @ent:
+ * ata_device_add - Register hardware device with ATA and SCSI layers
+ * @ent: Probe information describing hardware device to be registered
+ *
+ * This function processes the information provided in the probe
+ * information struct @ent, allocates the necessary ATA and SCSI
+ * host information structures, initializes them, and registers
+ * everything with requisite kernel subsystems.
+ *
+ * This function requests irqs, probes the ATA bus, and probes
+ * the SCSI bus.
*
* LOCKING:
+ * PCI/etc. bus probe sem.
*
* RETURNS:
+ * Number of ports registered. Zero on error (no ports registered).
*
*/
@@ -3604,7 +3964,15 @@
/**
* ata_std_ports - initialize ioaddr with standard port offsets.
* @ioaddr: IO address structure to be initialized
+ *
+ * Utility function which initializes data_addr, error_addr,
+ * feature_addr, nsect_addr, lbal_addr, lbam_addr, lbah_addr,
+ * device_addr, status_addr, and command_addr to standard offsets
+ * relative to cmd_addr.
+ *
+ * Does not set ctl_addr, altstatus_addr, bmdma_addr, or scr_addr.
*/
+
void ata_std_ports(struct ata_ioports *ioaddr)
{
ioaddr->data_addr = ioaddr->cmd_addr + ATA_REG_DATA;
@@ -3646,6 +4014,20 @@
return probe_ent;
}
+
+
+/**
+ * ata_pci_init_native_mode - Initialize native-mode driver
+ * @pdev: pci device to be initialized
+ * @port: array[2] of pointers to port info structures.
+ *
+ * Utility function which allocates and initializes an
+ * ata_probe_ent structure for a standard dual-port
+ * PIO-based IDE controller. The returned ata_probe_ent
+ * structure can be passed to ata_device_add(). The returned
+ * ata_probe_ent structure should then be freed with kfree().
+ */
+
#ifdef CONFIG_PCI
struct ata_probe_ent *
ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port)
@@ -3727,10 +4109,19 @@
* @port_info: Information from low-level host driver
* @n_ports: Number of ports attached to host controller
*
+ * This is a helper function which can be called from a driver's
+ * xxx_init_one() probe function if the hardware uses traditional
+ * IDE taskfile registers.
+ *
+ * This function calls pci_enable_device(), reserves its register
+ * regions, sets the dma mask, enables bus master mode, and calls
+ * ata_device_add()
+ *
* LOCKING:
* Inherited from PCI layer (may sleep).
*
* RETURNS:
+ * Zero on success, negative on errno-based value on error.
*
*/
@@ -3949,15 +4340,6 @@
#endif /* CONFIG_PCI */
-/**
- * ata_init -
- *
- * LOCKING:
- *
- * RETURNS:
- *
- */
-
static int __init ata_init(void)
{
ata_wq = create_workqueue("ata");
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 416ba67..7a4adc4 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -947,7 +947,7 @@
}
/**
- * ata_scsiop_noop -
+ * ata_scsiop_noop - Command handler that simply returns success.
* @args: device IDENTIFY data / SCSI command of interest.
* @rbuf: Response buffer, to which simulated SCSI cmd output is sent.
* @buflen: Response buffer length.
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 5794482..3c97aa4 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -507,6 +507,7 @@
int ret, i;
unsigned int id, lun;
unsigned long serial;
+ unsigned long flags;
if (!CMD_SP(cmd))
return FAILED;
@@ -519,7 +520,7 @@
/* Check active list for command command. */
spin_unlock_irq(ha->host->host_lock);
- spin_lock(&ha->hardware_lock);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
for (i = 1; i < MAX_OUTSTANDING_COMMANDS; i++) {
sp = ha->outstanding_cmds[i];
@@ -534,7 +535,7 @@
sp->state));
DEBUG3(qla2x00_print_scsi_cmd(cmd);)
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (qla2x00_abort_command(ha, sp)) {
DEBUG2(printk("%s(%ld): abort_command "
"mbx failed.\n", __func__, ha->host_no));
@@ -543,20 +544,19 @@
"mbx success.\n", __func__, ha->host_no));
ret = SUCCESS;
}
- spin_lock(&ha->hardware_lock);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
break;
}
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Wait for the command to be returned. */
if (ret == SUCCESS) {
- spin_unlock(&ha->hardware_lock);
if (qla2x00_eh_wait_on_command(ha, cmd) != QLA_SUCCESS) {
qla_printk(KERN_ERR, ha,
"scsi(%ld:%d:%d): Abort handler timed out -- %lx "
"%x.\n", ha->host_no, id, lun, serial, ret);
}
- spin_lock(&ha->hardware_lock);
}
spin_lock_irq(ha->host->host_lock);
@@ -588,6 +588,7 @@
int status;
srb_t *sp;
struct scsi_cmnd *cmd;
+ unsigned long flags;
status = 0;
@@ -596,11 +597,11 @@
* array
*/
for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
- spin_lock(&ha->hardware_lock);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
sp = ha->outstanding_cmds[cnt];
if (sp) {
cmd = sp->cmd;
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
if (cmd->device->id == t) {
if (!qla2x00_eh_wait_on_command(ha, cmd)) {
status = 1;
@@ -608,7 +609,7 @@
}
}
} else {
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
}
return (status);
@@ -740,6 +741,7 @@
int status;
srb_t *sp;
struct scsi_cmnd *cmd;
+ unsigned long flags;
status = 1;
@@ -748,17 +750,17 @@
* array
*/
for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
- spin_lock(&ha->hardware_lock);
+ spin_lock_irqsave(&ha->hardware_lock, flags);
sp = ha->outstanding_cmds[cnt];
if (sp) {
cmd = sp->cmd;
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
status = qla2x00_eh_wait_on_command(ha, cmd);
if (status == 0)
break;
}
else {
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
}
return (status);
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index 238580d..49ed557 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -432,7 +432,13 @@
writeb(cls, mmio_base + SIL_FIFO_R0);
writeb(cls, mmio_base + SIL_FIFO_W0);
writeb(cls, mmio_base + SIL_FIFO_R1);
- writeb(cls, mmio_base + SIL_FIFO_W2);
+ writeb(cls, mmio_base + SIL_FIFO_W1);
+ if (ent->driver_data == sil_3114) {
+ writeb(cls, mmio_base + SIL_FIFO_R2);
+ writeb(cls, mmio_base + SIL_FIFO_W2);
+ writeb(cls, mmio_base + SIL_FIFO_R3);
+ writeb(cls, mmio_base + SIL_FIFO_W3);
+ }
} else
printk(KERN_WARNING DRV_NAME "(%s): cache line size not set. Driver may not function\n",
pci_name(pdev));
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index cca7726..8d0d302 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -1197,6 +1197,7 @@
if (!starget)
return ERR_PTR(-ENOMEM);
+ get_device(&starget->dev);
down(&shost->scan_mutex);
res = scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata);
if (res != SCSI_SCAN_LUN_PRESENT)
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 22565a6..98641c3 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -197,7 +197,7 @@
sa1100_rx_chars(struct sa1100_port *sport, struct pt_regs *regs)
{
struct tty_struct *tty = sport->port.info->tty;
- unsigned int status, ch, flg, ignored = 0;
+ unsigned int status, ch, flg;
status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
UTSR0_TO_SM(UART_GET_UTSR0(sport));
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 5d2ceb6..1f98532 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -234,7 +234,7 @@
return "DSIU";
}
- return "unknown";
+ return NULL;
}
static unsigned int siu_tx_empty(struct uart_port *port)
@@ -482,9 +482,6 @@
struct uart_port *port;
uint8_t iir, lsr;
- if (dev_id == NULL)
- return IRQ_NONE;
-
port = (struct uart_port *)dev_id;
iir = siu_read(port, UART_IIR);
@@ -507,6 +504,9 @@
{
int retval;
+ if (port->membase == NULL)
+ return -ENODEV;
+
siu_clear_fifo(port);
(void)siu_read(port, UART_LSR);
@@ -545,9 +545,6 @@
unsigned long flags;
uint8_t lcr;
- if (port->membase == NULL)
- return;
-
siu_write(port, UART_IER, 0);
spin_lock_irqsave(&port->lock, flags);
@@ -802,53 +799,6 @@
#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
-static void early_set_termios(struct uart_port *port, struct termios *new,
- struct termios *old)
-{
- tcflag_t c_cflag;
- uint8_t lcr;
- unsigned int baud, quot;
-
- c_cflag = new->c_cflag;
- switch (c_cflag & CSIZE) {
- case CS5:
- lcr = UART_LCR_WLEN5;
- break;
- case CS6:
- lcr = UART_LCR_WLEN6;
- break;
- case CS7:
- lcr = UART_LCR_WLEN7;
- break;
- default:
- lcr = UART_LCR_WLEN8;
- break;
- }
-
- if (c_cflag & CSTOPB)
- lcr |= UART_LCR_STOP;
- if (c_cflag & PARENB)
- lcr |= UART_LCR_PARITY;
- if ((c_cflag & PARODD) != PARODD)
- lcr |= UART_LCR_EPAR;
- if (c_cflag & CMSPAR)
- lcr |= UART_LCR_SPAR;
-
- baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud);
-
- siu_write(port, UART_LCR, lcr | UART_LCR_DLAB);
-
- siu_write(port, UART_DLL, (uint8_t)quot);
- siu_write(port, UART_DLM, (uint8_t)(quot >> 8));
-
- siu_write(port, UART_LCR, lcr);
-}
-
-static struct uart_ops early_uart_ops = {
- .set_termios = early_set_termios,
-};
-
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
static void wait_for_xmitr(struct uart_port *port)
@@ -915,7 +865,7 @@
if (port->membase == NULL) {
if (port->mapbase == 0)
return -ENODEV;
- port->membase = (unsigned char __iomem *)KSEG1ADDR(port->mapbase);
+ port->membase = ioremap(port->mapbase, siu_port_size(port));
}
vr41xx_select_siu_interface(SIU_INTERFACE_RS232C);
@@ -949,7 +899,7 @@
for (i = 0; i < num; i++) {
port = &siu_uart_ports[i];
- port->ops = &early_uart_ops;
+ port->ops = &siu_uart_ops;
}
register_console(&siu_console);
@@ -994,8 +944,10 @@
port->dev = dev;
retval = uart_add_one_port(&siu_uart_driver, port);
- if (retval)
+ if (retval < 0) {
+ port->dev = NULL;
break;
+ }
}
if (i == 0 && retval < 0) {
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 4ab5000..4d0c9e6 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -290,32 +290,30 @@
{
struct usb_interface *intf;
struct usb_device *udev;
+ int len;
intf = to_usb_interface(dev);
udev = interface_to_usbdev(intf);
- if (udev->descriptor.bDeviceClass == 0) {
- struct usb_host_interface *alt = intf->cur_altsetting;
- return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic%02Xisc%02Xip%02X\n",
- le16_to_cpu(udev->descriptor.idVendor),
- le16_to_cpu(udev->descriptor.idProduct),
- le16_to_cpu(udev->descriptor.bcdDevice),
- udev->descriptor.bDeviceClass,
- udev->descriptor.bDeviceSubClass,
- udev->descriptor.bDeviceProtocol,
- alt->desc.bInterfaceClass,
- alt->desc.bInterfaceSubClass,
- alt->desc.bInterfaceProtocol);
- } else {
- return sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic*isc*ip*\n",
+ len = sprintf(buf, "usb:v%04Xp%04Xd%04Xdc%02Xdsc%02Xdp%02Xic",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct),
le16_to_cpu(udev->descriptor.bcdDevice),
udev->descriptor.bDeviceClass,
udev->descriptor.bDeviceSubClass,
udev->descriptor.bDeviceProtocol);
- }
+ buf += len;
+ if (udev->descriptor.bDeviceClass == 0) {
+ struct usb_host_interface *alt = intf->cur_altsetting;
+
+ return len + sprintf(buf, "%02Xisc%02Xip%02X\n",
+ alt->desc.bInterfaceClass,
+ alt->desc.bInterfaceSubClass,
+ alt->desc.bInterfaceProtocol);
+ } else {
+ return len + sprintf(buf, "*isc*ip*\n");
+ }
}
static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 429330b..d7b4f79 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -439,9 +439,12 @@
/* force reset to complete */
writel (temp & ~PORT_RESET,
&ehci->regs->port_status [wIndex]);
+ /* REVISIT: some hardware needs 550+ usec to clear
+ * this bit; seems too long to spin routinely...
+ */
retval = handshake (
&ehci->regs->port_status [wIndex],
- PORT_RESET, 0, 500);
+ PORT_RESET, 0, 750);
if (retval != 0) {
ehci_err (ehci, "port %d reset error %d\n",
wIndex + 1, retval);
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 869ff73..2d8bd9d 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -1315,6 +1315,8 @@
#define USB_DEVICE_ID_WACOM_INTUOS2 0x0040
#define USB_DEVICE_ID_WACOM_VOLITO 0x0060
#define USB_DEVICE_ID_WACOM_PTU 0x0003
+#define USB_DEVICE_ID_WACOM_INTUOS3 0x00B0
+#define USB_DEVICE_ID_WACOM_CINTIQ 0x003F
#define USB_VENDOR_ID_KBGEAR 0x084e
#define USB_DEVICE_ID_KBGEAR_JAMSTUDIO 0x1001
@@ -1401,6 +1403,7 @@
#define USB_VENDOR_ID_DELORME 0x1163
#define USB_DEVICE_ID_DELORME_EARTHMATE 0x0100
+#define USB_DEVICE_ID_DELORME_EM_LT20 0x0200
#define USB_VENDOR_ID_MCC 0x09db
#define USB_DEVICE_ID_MCC_PMD1024LS 0x0076
@@ -1412,6 +1415,12 @@
#define USB_VENDOR_ID_BTC 0x046e
#define USB_DEVICE_ID_BTC_KEYBOARD 0x5303
+#define USB_VENDOR_ID_VERNIER 0x08f7
+#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001
+#define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002
+#define USB_DEVICE_ID_VERNIER_SKIP 0x0003
+#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004
+
/*
* Alphabetically sorted blacklist by quirk type.
@@ -1437,6 +1446,7 @@
{ USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_CYPRESS, USB_DEVICE_ID_CYPRESS_HIDCOM, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EARTHMATE, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_DELORME, USB_DEVICE_ID_DELORME_EM_LT20, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_4_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_GLAB, USB_DEVICE_ID_1_PHIDGETSERVO_30, HID_QUIRK_IGNORE },
@@ -1456,6 +1466,10 @@
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 500, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PENPARTNER, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE + 1, HID_QUIRK_IGNORE },
@@ -1481,6 +1495,10 @@
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS2 + 7, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_VOLITO, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_PTU, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 1, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS3 + 2, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_CINTIQ, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_4_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20, HID_QUIRK_IGNORE },
diff --git a/drivers/usb/media/pwc/ChangeLog b/drivers/usb/media/pwc/ChangeLog
deleted file mode 100644
index b2eb71a..0000000
--- a/drivers/usb/media/pwc/ChangeLog
+++ /dev/null
@@ -1,143 +0,0 @@
-9.0.2
-
-* Adding #ifdef to compile PWC before and after 2.6.5
-
-9.0.1
-
-9.0
-
-
-8.12
-
-* Implement motorized pan/tilt feature for Logitech QuickCam Orbit/Spere.
-
-8.11.1
-
-* Fix for PCVC720/40, would not be able to set videomode
-* Fix for Samsung MPC models, appearantly they are based on a newer chipset
-
-8.11
-
-* 20 dev_hints (per request)
-* Hot unplugging should be better, no more dangling pointers or memory leaks
-* Added reserved Logitech webcam IDs
-* Device now remembers size & fps between close()/open()
-* Removed palette stuff altogether
-
-8.10.1
-
-* Added IDs for PCVC720K/40 and Creative Labs Webcam Pro
-
-8.10
-
-* Fixed ID for QuickCam Notebook pro
-* Added GREALSIZE ioctl() call
-* Fixed bug in case PWCX was not loaded and invalid size was set
-
-8.9
-
-* Merging with kernel 2.5.49
-* Adding IDs for QuickCam Zoom & QuickCam Notebook
-
-8.8
-
-* Fixing 'leds' parameter
-* Adding IDs for Logitech QuickCam Pro 4000
-* Making URB init/cleanup a little nicer
-
-8.7
-
-* Incorporating changes in ioctl() parameter passing
-* Also changes to URB mechanism
-
-8.6
-
-* Added ID's for Visionite VCS UM100 and UC300
-* Removed YUV420-interlaced palette altogether (was confusing)
-* Removed MIRROR stuff as it didn't work anyway
-* Fixed a problem with the 'leds' parameter (wouldn't blink)
-* Added ioctl()s for advanced features: 'extended' whitebalance ioctl()s,
- CONTOUR, BACKLIGHT, FLICKER, DYNNOISE.
-* VIDIOCGCAP.name now contains real camera model name instead of
- 'Philips xxx webcam'
-* Added PROBE ioctl (see previous point & API doc)
-
-8.5
-
-* Adding IDs for Creative Labs Webcam 5
-* Adding IDs for SOTEC CMS-001 webcam
-* Solving possible hang in VIDIOCSYNC when unplugging the cam
-* Forgot to return structure in VIDIOCPWCGAWB, oops
-* Time interval for the LEDs are now in milliseconds
-
-8.4
-
-* Fixing power_save option for Vesta range
-* Handling new error codes in ISOC callback
-* Adding dev_hint module parameter, to specify /dev/videoX device nodes
-
-8.3
-
-* Adding Samsung C10 and C30 cameras
-* Removing palette module parameter
-* Fixed typo in ID of QuickCam 3000 Pro
-* Adding LED settings (blinking while in use) for ToUCam cameras.
-* Turns LED off when camera is not in use.
-
-8.2
-
-* Making module more silent when trace = 0
-* Adding QuickCam 3000 Pro IDs
-* Chrominance control for the Vesta cameras
-* Hopefully fixed problems on machines with BIGMEM and > 1GB of RAM
-* Included Oliver Neukem's lock_kernel() patch
-* Allocates less memory for image buffers
-* Adds ioctl()s for the whitebalancing
-
-8.1
-
-* Adding support for 750
-* Adding V4L GAUDIO/SAUDIO/UNIT ioctl() calls
-
-8.0
-* 'damage control' after inclusion in 2.4.5.
-* Changed wait-queue mechanism in read/mmap/poll according to the book.
-* Included YUV420P palette.
-* Changed interface to decompressor module.
-* Cleaned up pwc structure a bit.
-
-7.0
-
-* Fixed bug in vcvt_420i_yuyv; extra variables on stack were misaligned.
-* There is now a clear error message when an image size is selected that
- is only supported using the decompressor, and the decompressor isn't
- loaded.
-* When the decompressor wasn't loaded, selecting large image size
- would create skewed or double images.
-
-6.3
-
-* Introduced spinlocks for the buffer pointer manipulation; a number of
- reports seem to suggest the down()/up() semaphores were the cause of
- lockups, since they are not suitable for interrupt/user locking.
-* Separated decompressor and core code into 2 modules.
-
-6.2
-
-* Non-integral image sizes are now padded with gray or black.
-* Added SHUTTERSPEED ioctl().
-* Fixed buglet in VIDIOCPWCSAGC; the function would always return an error,
- even though the call succeeded.
-* Added hotplug support for 2.4.*.
-* Memory: the 645/646 uses less memory now.
-
-6.1
-
-* VIDIOCSPICT returns -EINVAL with invalid palettes.
-* Added saturation control.
-* Split decompressors from rest.
-* Fixed bug that would reset the framerate to the default framerate if
- the rate field was set to 0 (which is not what I intended, nl. do not
- change the framerate!).
-* VIDIOCPWCSCQUAL (setting compression quality) now takes effect immediately.
-* Workaround for a bug in the 730 sensor.
diff --git a/drivers/usb/media/pwc/pwc-if.c b/drivers/usb/media/pwc/pwc-if.c
index 5429ff3..b77e65c 100644
--- a/drivers/usb/media/pwc/pwc-if.c
+++ b/drivers/usb/media/pwc/pwc-if.c
@@ -332,10 +332,6 @@
#endif
;
}
- if (kbuf == NULL) {
- Err("Failed to allocate decompress table.\n");
- return -ENOMEM;
- }
pdev->decompress_data = kbuf;
/* Allocate image buffer; double buffer for mmap() */
diff --git a/drivers/usb/net/kaweth.c b/drivers/usb/net/kaweth.c
index a9a7cf4..fd6ff4c 100644
--- a/drivers/usb/net/kaweth.c
+++ b/drivers/usb/net/kaweth.c
@@ -520,7 +520,7 @@
/* we check the link state to report changes */
if (kaweth->linkstate != (act_state = ( kaweth->intbuffer[STATE_OFFSET] | STATE_MASK) >> STATE_SHIFT)) {
- if (!act_state)
+ if (act_state)
netif_carrier_on(kaweth->net);
else
netif_carrier_off(kaweth->net);
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 85476e7..4cbb408 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -2765,7 +2765,7 @@
}
/* expect bcdVersion 1.0, ignore */
if (memcmp(&desc->bGUID, blan_guid, 16)
- && memcmp(&desc->bGUID, blan_guid, 16) ) {
+ && memcmp(&desc->bGUID, safe_guid, 16) ) {
/* hey, this one might _really_ be MDLM! */
dev_dbg (&intf->dev, "MDLM guid\n");
goto bad_desc;
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index bc798ed..9438909 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -455,6 +455,17 @@
To compile this driver as a module, choose M here: the
module will be called keyspan_pda.
+config USB_SERIAL_OPTION
+ tristate "USB Option PCMCIA serial driver"
+ depends on USB_SERIAL && USB_OHCI_HCD && PCCARD
+ help
+ Say Y here if you want to use an Option card. This is a
+ GSM card, controlled by three serial ports which are connected
+ via an OHCI adapter located on a PC card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called option.
+
config USB_SERIAL_OMNINET
tristate "USB ZyXEL omni.net LCD Plus Driver (EXPERIMENTAL)"
depends on USB_SERIAL && EXPERIMENTAL
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index d56ff6d..6c7cdcc 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -32,6 +32,7 @@
obj-$(CONFIG_USB_SERIAL_KOBIL_SCT) += kobil_sct.o
obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
+obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o
obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o
obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 7e9bb63..4ace996 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -7,6 +7,14 @@
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
+ * Support to set flow control line levels using TIOCMGET and TIOCMSET
+ * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
+ * control thanks to Munir Nassar nassarmu@real-time.com
+ *
+ * Outstanding Issues:
+ * Buffers are not flushed when the port is opened.
+ * Multiple calls to write() may fail with "Resource temporarily unavailable"
+ *
*/
#include <linux/config.h>
@@ -24,7 +32,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v0.03"
+#define DRIVER_VERSION "v0.04"
#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver"
/*
@@ -35,6 +43,9 @@
static void cp2101_close(struct usb_serial_port*, struct file*);
static void cp2101_get_termios(struct usb_serial_port*);
static void cp2101_set_termios(struct usb_serial_port*, struct termios*);
+static int cp2101_tiocmget (struct usb_serial_port *, struct file *);
+static int cp2101_tiocmset (struct usb_serial_port *, struct file *,
+ unsigned int, unsigned int);
static void cp2101_break_ctl(struct usb_serial_port*, int);
static int cp2101_startup (struct usb_serial *);
static void cp2101_shutdown(struct usb_serial*);
@@ -43,9 +54,10 @@
static int debug;
static struct usb_device_id id_table [] = {
- {USB_DEVICE(0x10c4, 0xea60) }, /*Silicon labs factory default*/
- {USB_DEVICE(0x10ab, 0x10c5) }, /*Siemens MC60 Cable*/
- { } /* Terminating Entry*/
+ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
+ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
+ { } /* Terminating Entry */
};
MODULE_DEVICE_TABLE (usb, id_table);
@@ -70,32 +82,35 @@
.close = cp2101_close,
.break_ctl = cp2101_break_ctl,
.set_termios = cp2101_set_termios,
+ .tiocmget = cp2101_tiocmget,
+ .tiocmset = cp2101_tiocmset,
.attach = cp2101_startup,
.shutdown = cp2101_shutdown,
};
-/*Config request types*/
+/* Config request types */
#define REQTYPE_HOST_TO_DEVICE 0x41
#define REQTYPE_DEVICE_TO_HOST 0xc1
-/*Config SET requests. To GET, add 1 to the request number*/
-#define CP2101_UART 0x00 /*Enable / Disable*/
-#define CP2101_BAUDRATE 0x01 /*(BAUD_RATE_GEN_FREQ / baudrate)*/
-#define CP2101_BITS 0x03 /*0x(0)(data bits)(parity)(stop bits)*/
-#define CP2101_BREAK 0x05 /*On / Off*/
-#define CP2101_DTRRTS 0x07 /*101 / 202 ???*/
-#define CP2101_CONFIG_16 0x13 /*16 bytes of config data ???*/
-#define CP2101_CONFIG_6 0x19 /*6 bytes of config data ???*/
+/* Config SET requests. To GET, add 1 to the request number */
+#define CP2101_UART 0x00 /* Enable / Disable */
+#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */
+#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */
+#define CP2101_BREAK 0x05 /* On / Off */
+#define CP2101_CONTROL 0x07 /* Flow control line states */
+#define CP2101_MODEMCTL 0x13 /* Modem controls */
+#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */
-/*CP2101_UART*/
+/* CP2101_UART */
#define UART_ENABLE 0x0001
#define UART_DISABLE 0x0000
-/*CP2101_BAUDRATE*/
+/* CP2101_BAUDRATE */
#define BAUD_RATE_GEN_FREQ 0x384000
-/*CP2101_BITS*/
+/* CP2101_BITS */
#define BITS_DATA_MASK 0X0f00
+#define BITS_DATA_5 0X0500
#define BITS_DATA_6 0X0600
#define BITS_DATA_7 0X0700
#define BITS_DATA_8 0X0800
@@ -112,64 +127,137 @@
#define BITS_STOP_1 0x0000
#define BITS_STOP_1_5 0x0001
#define BITS_STOP_2 0x0002
+
+/* CP2101_BREAK */
#define BREAK_ON 0x0000
#define BREAK_OFF 0x0001
+/* CP2101_CONTROL */
+#define CONTROL_DTR 0x0001
+#define CONTROL_RTS 0x0002
+#define CONTROL_CTS 0x0010
+#define CONTROL_DSR 0x0020
+#define CONTROL_RING 0x0040
+#define CONTROL_DCD 0x0080
+#define CONTROL_WRITE_DTR 0x0100
+#define CONTROL_WRITE_RTS 0x0200
-static int cp2101_get_config(struct usb_serial_port* port, u8 request)
+/*
+ * cp2101_get_config
+ * Reads from the CP2101 configuration registers
+ * 'size' is specified in bytes.
+ * 'data' is a pointer to a pre-allocated array of integers large
+ * enough to hold 'size' bytes (with 4 bytes to each integer)
+ */
+static int cp2101_get_config(struct usb_serial_port* port, u8 request,
+ unsigned int *data, int size)
{
struct usb_serial *serial = port->serial;
- unsigned char buf[4];
- unsigned int value;
- int result, i;
+ u32 *buf;
+ int result, i, length;
- /*For get requests, the request number must be incremented*/
+ /* Number of integers required to contain the array */
+ length = (((size - 1) | 3) + 1)/4;
+
+ buf = kmalloc (length * sizeof(u32), GFP_KERNEL);
+ memset(buf, 0, length * sizeof(u32));
+
+ if (!buf) {
+ dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ /* For get requests, the request number must be incremented */
request++;
- /*Issue the request, attempting to read 4 bytes*/
+ /* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg (serial->dev,usb_rcvctrlpipe (serial->dev, 0),
request, REQTYPE_DEVICE_TO_HOST, 0x0000,
- 0, buf, 4, 300);
+ 0, buf, size, 300);
- if (result < 0) {
+ /* Convert data into an array of integers */
+ for (i=0; i<length; i++)
+ data[i] = le32_to_cpu(buf[i]);
+
+ kfree(buf);
+
+ if (result != size) {
dev_err(&port->dev, "%s - Unable to send config request, "
- "request=0x%x result=%d\n",
- __FUNCTION__, request, result);
- return result;
+ "request=0x%x size=%d result=%d\n",
+ __FUNCTION__, request, size, result);
+ return -EPROTO;
}
- /*Assemble each byte read into an integer value*/
- value = 0;
- for (i=0; i<4 && i<result; i++)
- value |= (buf[i] << (i * 8));
-
- dbg( " %s - request=0x%x result=%d value=0x%x",
- __FUNCTION__, request, result, value);
-
- return value;
-}
-
-static int cp2101_set_config(struct usb_serial_port* port, u8 request, u16 value)
-{
- struct usb_serial *serial = port->serial;
- int result;
- result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0),
- request, REQTYPE_HOST_TO_DEVICE, value,
- 0, NULL, 0, 300);
-
- if (result <0) {
- dev_err(&port->dev, "%s - Unable to send config request, "
- "request=0x%x value=0x%x result=%d\n",
- __FUNCTION__, request, value, result);
- return result;
- }
-
- dbg(" %s - request=0x%x value=0x%x result=%d",
- __FUNCTION__, request, value, result);
-
return 0;
}
+/*
+ * cp2101_set_config
+ * Writes to the CP2101 configuration registers
+ * Values less than 16 bits wide are sent directly
+ * 'size' is specified in bytes.
+ */
+static int cp2101_set_config(struct usb_serial_port* port, u8 request,
+ unsigned int *data, int size)
+{
+ struct usb_serial *serial = port->serial;
+ u32 *buf;
+ int result, i, length;
+
+ /* Number of integers required to contain the array */
+ length = (((size - 1) | 3) + 1)/4;
+
+ buf = kmalloc(length * sizeof(u32), GFP_KERNEL);
+ if (!buf) {
+ dev_err(&port->dev, "%s - out of memory.\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ /* Array of integers into bytes */
+ for (i = 0; i < length; i++)
+ buf[i] = cpu_to_le32(data[i]);
+
+ if (size > 2) {
+ result = usb_control_msg (serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ request, REQTYPE_HOST_TO_DEVICE, 0x0000,
+ 0, buf, size, 300);
+ } else {
+ result = usb_control_msg (serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ request, REQTYPE_HOST_TO_DEVICE, data[0],
+ 0, NULL, 0, 300);
+ }
+
+ kfree(buf);
+
+ if ((size > 2 && result != size) || result < 0) {
+ dev_err(&port->dev, "%s - Unable to send request, "
+ "request=0x%x size=%d result=%d\n",
+ __FUNCTION__, request, size, result);
+ return -EPROTO;
+ }
+
+ /* Single data value */
+ result = usb_control_msg (serial->dev,
+ usb_sndctrlpipe(serial->dev, 0),
+ request, REQTYPE_HOST_TO_DEVICE, data[0],
+ 0, NULL, 0, 300);
+ return 0;
+}
+
+/*
+ * cp2101_set_config_single
+ * Convenience function for calling cp2101_set_config on single data values
+ * without requiring an integer pointer
+ */
+static inline int cp2101_set_config_single(struct usb_serial_port* port,
+ u8 request, unsigned int data)
+{
+ return cp2101_set_config(port, request, &data, 2);
+}
+
static int cp2101_open (struct usb_serial_port *port, struct file *filp)
{
struct usb_serial *serial = port->serial;
@@ -177,7 +265,7 @@
dbg("%s - port %d", __FUNCTION__, port->number);
- if (cp2101_set_config(port, CP2101_UART, UART_ENABLE)) {
+ if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) {
dev_err(&port->dev, "%s - Unable to enable UART\n",
__FUNCTION__);
return -EPROTO;
@@ -198,9 +286,12 @@
return result;
}
- /*Configure the termios structure*/
+ /* Configure the termios structure */
cp2101_get_termios(port);
+ /* Set the DTR and RTS pins low */
+ cp2101_tiocmset(port, NULL, TIOCM_DTR | TIOCM_RTS, 0);
+
return 0;
}
@@ -228,16 +319,18 @@
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
- cp2101_set_config(port, CP2101_UART, UART_DISABLE);
+ cp2101_set_config_single(port, CP2101_UART, UART_DISABLE);
}
-/* cp2101_get_termios*/
-/* Reads the baud rate, data bits, parity and stop bits from the device*/
-/* Corrects any unsupported values*/
-/* Configures the termios structure to reflect the state of the device*/
+/*
+ * cp2101_get_termios
+ * Reads the baud rate, data bits, parity, stop bits and flow control mode
+ * from the device, corrects any unsupported values, and configures the
+ * termios structure to reflect the state of the device
+ */
static void cp2101_get_termios (struct usb_serial_port *port)
{
- unsigned int cflag;
+ unsigned int cflag, modem_ctl[4];
int baud;
int bits;
@@ -249,15 +342,16 @@
}
cflag = port->tty->termios->c_cflag;
- baud = cp2101_get_config(port, CP2101_BAUDRATE);
- /*Convert to baudrate*/
+ cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2);
+ /* Convert to baudrate */
if (baud)
baud = BAUD_RATE_GEN_FREQ / baud;
dbg("%s - baud rate = %d", __FUNCTION__, baud);
cflag &= ~CBAUD;
switch (baud) {
- /* The baud rates which are commented out below
+ /*
+ * The baud rates which are commented out below
* appear to be supported by the device
* but are non-standard
*/
@@ -284,14 +378,18 @@
dbg("%s - Baud rate is not supported, "
"using 9600 baud", __FUNCTION__);
cflag |= B9600;
- cp2101_set_config(port, CP2101_BAUDRATE,
+ cp2101_set_config_single(port, CP2101_BAUDRATE,
(BAUD_RATE_GEN_FREQ/9600));
break;
}
- bits = cp2101_get_config(port, CP2101_BITS);
+ cp2101_get_config(port, CP2101_BITS, &bits, 2);
cflag &= ~CSIZE;
switch(bits & BITS_DATA_MASK) {
+ case BITS_DATA_5:
+ dbg("%s - data bits = 5", __FUNCTION__);
+ cflag |= CS5;
+ break;
case BITS_DATA_6:
dbg("%s - data bits = 6", __FUNCTION__);
cflag |= CS6;
@@ -310,7 +408,7 @@
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
default:
dbg("%s - Unknown number of data bits, "
@@ -318,7 +416,7 @@
cflag |= CS8;
bits &= ~BITS_DATA_MASK;
bits |= BITS_DATA_8;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
}
@@ -341,21 +439,21 @@
"disabling parity)", __FUNCTION__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
case BITS_PARITY_SPACE:
dbg("%s - parity = SPACE (not supported, "
"disabling parity)", __FUNCTION__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
default:
dbg("%s - Unknown parity mode, "
"disabling parity", __FUNCTION__);
cflag &= ~PARENB;
bits &= ~BITS_PARITY_MASK;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
}
@@ -366,9 +464,9 @@
break;
case BITS_STOP_1_5:
dbg("%s - stop bits = 1.5 (not supported, "
- "using 1 stop bit", __FUNCTION__);
+ "using 1 stop bit)", __FUNCTION__);
bits &= ~BITS_STOP_MASK;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
case BITS_STOP_2:
dbg("%s - stop bits = 2", __FUNCTION__);
@@ -378,10 +476,19 @@
dbg("%s - Unknown number of stop bits, "
"using 1 stop bit", __FUNCTION__);
bits &= ~BITS_STOP_MASK;
- cp2101_set_config(port, CP2101_BITS, bits);
+ cp2101_set_config(port, CP2101_BITS, &bits, 2);
break;
}
+ cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ if (modem_ctl[0] & 0x0008) {
+ dbg("%s - flow control = CRTSCTS", __FUNCTION__);
+ cflag |= CRTSCTS;
+ } else {
+ dbg("%s - flow control = NONE", __FUNCTION__);
+ cflag &= ~CRTSCTS;
+ }
+
port->tty->termios->c_cflag = cflag;
}
@@ -389,8 +496,8 @@
struct termios *old_termios)
{
unsigned int cflag, old_cflag=0;
- int baud=0;
- int bits;
+ int baud=0, bits;
+ unsigned int modem_ctl[4];
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -400,7 +507,7 @@
}
cflag = port->tty->termios->c_cflag;
- /* check that they really want us to change something */
+ /* Check that they really want us to change something */
if (old_termios) {
if ((cflag == old_termios->c_cflag) &&
(RELEVANT_IFLAG(port->tty->termios->c_iflag)
@@ -415,7 +522,8 @@
/* If the baud rate is to be updated*/
if ((cflag & CBAUD) != (old_cflag & CBAUD)) {
switch (cflag & CBAUD) {
- /* The baud rates which are commented out below
+ /*
+ * The baud rates which are commented out below
* appear to be supported by the device
* but are non-standard
*/
@@ -448,18 +556,22 @@
if (baud) {
dbg("%s - Setting baud rate to %d baud", __FUNCTION__,
baud);
- if (cp2101_set_config(port, CP2101_BAUDRATE,
+ if (cp2101_set_config_single(port, CP2101_BAUDRATE,
(BAUD_RATE_GEN_FREQ / baud)))
dev_err(&port->dev, "Baud rate requested not "
"supported by device\n");
}
}
- /*If the number of data bits is to be updated*/
+ /* If the number of data bits is to be updated */
if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
- bits = cp2101_get_config(port, CP2101_BITS);
+ cp2101_get_config(port, CP2101_BITS, &bits, 2);
bits &= ~BITS_DATA_MASK;
switch (cflag & CSIZE) {
+ case CS5:
+ bits |= BITS_DATA_5;
+ dbg("%s - data bits = 5", __FUNCTION__);
+ break;
case CS6:
bits |= BITS_DATA_6;
dbg("%s - data bits = 6", __FUNCTION__);
@@ -483,13 +595,13 @@
bits |= BITS_DATA_8;
break;
}
- if (cp2101_set_config(port, CP2101_BITS, bits))
+ if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
dev_err(&port->dev, "Number of data bits requested "
"not supported by device\n");
}
if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
- bits = cp2101_get_config(port, CP2101_BITS);
+ cp2101_get_config(port, CP2101_BITS, &bits, 2);
bits &= ~BITS_PARITY_MASK;
if (cflag & PARENB) {
if (cflag & PARODD) {
@@ -500,13 +612,13 @@
dbg("%s - parity = EVEN", __FUNCTION__);
}
}
- if (cp2101_set_config(port, CP2101_BITS, bits))
+ if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
dev_err(&port->dev, "Parity mode not supported "
"by device\n");
}
if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
- bits = cp2101_get_config(port, CP2101_BITS);
+ cp2101_get_config(port, CP2101_BITS, &bits, 2);
bits &= ~BITS_STOP_MASK;
if (cflag & CSTOPB) {
bits |= BITS_STOP_2;
@@ -515,15 +627,90 @@
bits |= BITS_STOP_1;
dbg("%s - stop bits = 1", __FUNCTION__);
}
- if (cp2101_set_config(port, CP2101_BITS, bits))
+ if (cp2101_set_config(port, CP2101_BITS, &bits, 2))
dev_err(&port->dev, "Number of stop bits requested "
"not supported by device\n");
}
+
+ if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
+ cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
+ __FUNCTION__, modem_ctl[0], modem_ctl[1],
+ modem_ctl[2], modem_ctl[3]);
+
+ if (cflag & CRTSCTS) {
+ modem_ctl[0] &= ~0x7B;
+ modem_ctl[0] |= 0x09;
+ modem_ctl[1] = 0x80;
+ dbg("%s - flow control = CRTSCTS", __FUNCTION__);
+ } else {
+ modem_ctl[0] &= ~0x7B;
+ modem_ctl[0] |= 0x01;
+ modem_ctl[1] |= 0x40;
+ dbg("%s - flow control = NONE", __FUNCTION__);
+ }
+
+ dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
+ __FUNCTION__, modem_ctl[0], modem_ctl[1],
+ modem_ctl[2], modem_ctl[3]);
+ cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ }
+
+}
+
+static int cp2101_tiocmset (struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ int control = 0;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (set & TIOCM_RTS) {
+ control |= CONTROL_RTS;
+ control |= CONTROL_WRITE_RTS;
+ }
+ if (set & TIOCM_DTR) {
+ control |= CONTROL_DTR;
+ control |= CONTROL_WRITE_DTR;
+ }
+ if (clear & TIOCM_RTS) {
+ control &= ~CONTROL_RTS;
+ control |= CONTROL_WRITE_RTS;
+ }
+ if (clear & TIOCM_DTR) {
+ control &= ~CONTROL_DTR;
+ control |= CONTROL_WRITE_DTR;
+ }
+
+ dbg("%s - control = 0x%.4x", __FUNCTION__, control);
+
+ return cp2101_set_config(port, CP2101_CONTROL, &control, 2);
+
+}
+
+static int cp2101_tiocmget (struct usb_serial_port *port, struct file *file)
+{
+ int control, result;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ cp2101_get_config(port, CP2101_CONTROL, &control, 1);
+
+ result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
+ |((control & CONTROL_RTS) ? TIOCM_RTS : 0)
+ |((control & CONTROL_CTS) ? TIOCM_CTS : 0)
+ |((control & CONTROL_DSR) ? TIOCM_DSR : 0)
+ |((control & CONTROL_RING)? TIOCM_RI : 0)
+ |((control & CONTROL_DCD) ? TIOCM_CD : 0);
+
+ dbg("%s - control = 0x%.2x", __FUNCTION__, control);
+
+ return result;
}
static void cp2101_break_ctl (struct usb_serial_port *port, int break_state)
{
- u16 state;
+ int state;
dbg("%s - port %d", __FUNCTION__, port->number);
if (break_state == 0)
@@ -532,12 +719,12 @@
state = BREAK_ON;
dbg("%s - turning break %s", __FUNCTION__,
state==BREAK_OFF ? "off" : "on");
- cp2101_set_config(port, CP2101_BREAK, state);
+ cp2101_set_config(port, CP2101_BREAK, &state, 2);
}
static int cp2101_startup (struct usb_serial *serial)
{
- /*CP2101 buffers behave strangely unless device is reset*/
+ /* CP2101 buffers behave strangely unless device is reset */
usb_reset_device(serial->dev);
return 0;
}
@@ -548,7 +735,7 @@
dbg("%s", __FUNCTION__);
- /* stop reads and writes on all ports */
+ /* Stop reads and writes on all ports */
for (i=0; i < serial->num_ports; ++i) {
cp2101_cleanup(serial->port[i]);
}
@@ -560,16 +747,16 @@
retval = usb_serial_register(&cp2101_device);
if (retval)
- return retval; /*Failed to register*/
+ return retval; /* Failed to register */
retval = usb_register(&cp2101_driver);
if (retval) {
- /*Failed to register*/
+ /* Failed to register */
usb_serial_deregister(&cp2101_device);
return retval;
}
- /*Success*/
+ /* Success */
info(DRIVER_DESC " " DRIVER_VERSION);
return 0;
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 051c3a7..3bfcc7b 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -264,7 +264,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.4.1"
+#define DRIVER_VERSION "v1.4.2"
#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
@@ -687,6 +687,8 @@
char prev_status, diff_status; /* Used for TIOCMIWAIT */
__u8 rx_flags; /* receive state flags (throttling) */
spinlock_t rx_lock; /* spinlock for receive state */
+ struct work_struct rx_work;
+ int rx_processed;
__u16 interface; /* FT2232C port interface (0 for FT232/245) */
@@ -717,7 +719,7 @@
static int ftdi_chars_in_buffer (struct usb_serial_port *port);
static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs);
static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs);
-static void ftdi_process_read (struct usb_serial_port *port);
+static void ftdi_process_read (void *param);
static void ftdi_set_termios (struct usb_serial_port *port, struct termios * old);
static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file);
static int ftdi_tiocmset (struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear);
@@ -1387,6 +1389,8 @@
port->read_urb->transfer_buffer_length = BUFSZ;
}
+ INIT_WORK(&priv->rx_work, ftdi_process_read, port);
+
/* Free port's existing write urb and transfer buffer. */
if (port->write_urb) {
usb_free_urb (port->write_urb);
@@ -1617,6 +1621,7 @@
spin_unlock_irqrestore(&priv->rx_lock, flags);
/* Start reading from the device */
+ priv->rx_processed = 0;
usb_fill_bulk_urb(port->read_urb, dev,
usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
@@ -1667,6 +1672,10 @@
err("Error from RTS LOW urb");
}
} /* Note change no line if hupcl is off */
+
+ /* cancel any scheduled reading */
+ cancel_delayed_work(&priv->rx_work);
+ flush_scheduled_work();
/* shutdown our bulk read */
if (port->read_urb)
@@ -1862,23 +1871,14 @@
return;
}
- /* If throttled, delay receive processing until unthrottled. */
- spin_lock(&priv->rx_lock);
- if (priv->rx_flags & THROTTLED) {
- dbg("Deferring read urb processing until unthrottled");
- priv->rx_flags |= ACTUALLY_THROTTLED;
- spin_unlock(&priv->rx_lock);
- return;
- }
- spin_unlock(&priv->rx_lock);
-
ftdi_process_read(port);
} /* ftdi_read_bulk_callback */
-static void ftdi_process_read (struct usb_serial_port *port)
+static void ftdi_process_read (void *param)
{ /* ftdi_process_read */
+ struct usb_serial_port *port = (struct usb_serial_port*)param;
struct urb *urb;
struct tty_struct *tty;
struct ftdi_private *priv;
@@ -1889,6 +1889,7 @@
int result;
int need_flip;
int packet_offset;
+ unsigned long flags;
dbg("%s - port %d", __FUNCTION__, port->number);
@@ -1915,12 +1916,18 @@
data = urb->transfer_buffer;
- /* The first two bytes of every read packet are status */
- if (urb->actual_length > 2) {
- usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ if (priv->rx_processed) {
+ dbg("%s - already processed: %d bytes, %d remain", __FUNCTION__,
+ priv->rx_processed,
+ urb->actual_length - priv->rx_processed);
} else {
- dbg("Status only: %03oo %03oo",data[0],data[1]);
- }
+ /* The first two bytes of every read packet are status */
+ if (urb->actual_length > 2) {
+ usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
+ } else {
+ dbg("Status only: %03oo %03oo",data[0],data[1]);
+ }
+ }
/* TO DO -- check for hung up line and handle appropriately: */
@@ -1929,8 +1936,12 @@
/* if CD is dropped and the line is not CLOCAL then we should hangup */
need_flip = 0;
- for (packet_offset=0; packet_offset < urb->actual_length; packet_offset += PKTSZ) {
+ for (packet_offset = priv->rx_processed; packet_offset < urb->actual_length; packet_offset += PKTSZ) {
+ int length;
+
/* Compare new line status to the old one, signal if different */
+ /* N.B. packet may be processed more than once, but differences
+ * are only processed once. */
if (priv != NULL) {
char new_status = data[packet_offset+0] & FTDI_STATUS_B0_MASK;
if (new_status != priv->prev_status) {
@@ -1940,6 +1951,35 @@
}
}
+ length = min(PKTSZ, urb->actual_length-packet_offset)-2;
+ if (length < 0) {
+ err("%s - bad packet length: %d", __FUNCTION__, length+2);
+ length = 0;
+ }
+
+ /* have to make sure we don't overflow the buffer
+ with tty_insert_flip_char's */
+ if (tty->flip.count+length > TTY_FLIPBUF_SIZE) {
+ tty_flip_buffer_push(tty);
+ need_flip = 0;
+
+ if (tty->flip.count != 0) {
+ /* flip didn't work, this happens when ftdi_process_read() is
+ * called from ftdi_unthrottle, because TTY_DONT_FLIP is set */
+ dbg("%s - flip buffer push failed", __FUNCTION__);
+ break;
+ }
+ }
+ if (priv->rx_flags & THROTTLED) {
+ dbg("%s - throttled", __FUNCTION__);
+ break;
+ }
+ if (tty->ldisc.receive_room(tty)-tty->flip.count < length) {
+ /* break out & wait for throttling/unthrottling to happen */
+ dbg("%s - receive room low", __FUNCTION__);
+ break;
+ }
+
/* Handle errors and break */
error_flag = TTY_NORMAL;
/* Although the device uses a bitmask and hence can have multiple */
@@ -1962,13 +2002,8 @@
error_flag = TTY_FRAME;
dbg("FRAMING error");
}
- if (urb->actual_length > packet_offset + 2) {
- for (i = 2; (i < PKTSZ) && ((i+packet_offset) < urb->actual_length); ++i) {
- /* have to make sure we don't overflow the buffer
- with tty_insert_flip_char's */
- if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
- tty_flip_buffer_push(tty);
- }
+ if (length > 0) {
+ for (i = 2; i < length+2; i++) {
/* Note that the error flag is duplicated for
every character received since we don't know
which character it applied to */
@@ -2005,6 +2040,35 @@
tty_flip_buffer_push(tty);
}
+ if (packet_offset < urb->actual_length) {
+ /* not completely processed - record progress */
+ priv->rx_processed = packet_offset;
+ dbg("%s - incomplete, %d bytes processed, %d remain",
+ __FUNCTION__, packet_offset,
+ urb->actual_length - packet_offset);
+ /* check if we were throttled while processing */
+ spin_lock_irqsave(&priv->rx_lock, flags);
+ if (priv->rx_flags & THROTTLED) {
+ priv->rx_flags |= ACTUALLY_THROTTLED;
+ spin_unlock_irqrestore(&priv->rx_lock, flags);
+ dbg("%s - deferring remainder until unthrottled",
+ __FUNCTION__);
+ return;
+ }
+ spin_unlock_irqrestore(&priv->rx_lock, flags);
+ /* if the port is closed stop trying to read */
+ if (port->open_count > 0){
+ /* delay processing of remainder */
+ schedule_delayed_work(&priv->rx_work, 1);
+ } else {
+ dbg("%s - port is closed", __FUNCTION__);
+ }
+ return;
+ }
+
+ /* urb is completely processed */
+ priv->rx_processed = 0;
+
/* if the port is closed stop trying to read */
if (port->open_count > 0){
/* Continue trying to always read */
@@ -2444,7 +2508,7 @@
spin_unlock_irqrestore(&priv->rx_lock, flags);
if (actually_throttled)
- ftdi_process_read(port);
+ schedule_work(&priv->rx_work);
}
static int __init ftdi_init (void)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
new file mode 100644
index 0000000..b722175
--- /dev/null
+++ b/drivers/usb/serial/option.c
@@ -0,0 +1,729 @@
+/*
+ Option Card (PCMCIA to) USB to Serial Driver
+
+ Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de>
+
+ This driver is free software; you can redistribute it and/or modify
+ it under the terms of Version 2 of the GNU General Public License as
+ published by the Free Software Foundation.
+
+ Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org>
+
+ History:
+
+ 2005-05-19 v0.1 Initial version, based on incomplete docs
+ and analysis of misbehavior of the standard driver
+ 2005-05-20 v0.2 Extended the input buffer to avoid losing
+ random 64-byte chunks of data
+ 2005-05-21 v0.3 implemented chars_in_buffer()
+ turned on low_latency
+ simplified the code somewhat
+*/
+#define DRIVER_VERSION "v0.3"
+#define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>"
+#define DRIVER_DESC "Option Card (PC-Card to) USB to Serial Driver"
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include "usb-serial.h"
+
+/* Function prototypes */
+static int option_open (struct usb_serial_port *port, struct file *filp);
+static void option_close (struct usb_serial_port *port, struct file *filp);
+static int option_startup (struct usb_serial *serial);
+static void option_shutdown (struct usb_serial *serial);
+static void option_rx_throttle (struct usb_serial_port *port);
+static void option_rx_unthrottle (struct usb_serial_port *port);
+static int option_write_room (struct usb_serial_port *port);
+
+static void option_instat_callback(struct urb *urb, struct pt_regs *regs);
+
+
+static int option_write (struct usb_serial_port *port,
+ const unsigned char *buf, int count);
+
+static int option_chars_in_buffer (struct usb_serial_port *port);
+static int option_ioctl (struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static void option_set_termios (struct usb_serial_port *port,
+ struct termios *old);
+static void option_break_ctl (struct usb_serial_port *port, int break_state);
+static int option_tiocmget (struct usb_serial_port *port, struct file *file);
+static int option_tiocmset (struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear);
+static int option_send_setup (struct usb_serial_port *port);
+
+/* Vendor and product IDs */
+#define OPTION_VENDOR_ID 0x0AF0
+
+#define OPTION_PRODUCT_OLD 0x5000
+#define OPTION_PRODUCT_WLAN 0x6000
+
+static struct usb_device_id option_ids[] = {
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_OLD) },
+ { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_WLAN) },
+ { } /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, option_ids);
+
+static struct usb_driver option_driver = {
+ .owner = THIS_MODULE,
+ .name = "option",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = option_ids,
+};
+
+/* The card has three separate interfaces, wich the serial driver
+ * recognizes separately, thus num_port=1.
+ */
+static struct usb_serial_device_type option_3port_device = {
+ .owner = THIS_MODULE,
+ .name = "Option 3-port card",
+ .short_name = "option",
+ .id_table = option_ids,
+ .num_interrupt_in = NUM_DONT_CARE,
+ .num_bulk_in = NUM_DONT_CARE,
+ .num_bulk_out = NUM_DONT_CARE,
+ .num_ports = 1, /* 3 */
+ .open = option_open,
+ .close = option_close,
+ .write = option_write,
+ .write_room = option_write_room,
+ .chars_in_buffer = option_chars_in_buffer,
+ .throttle = option_rx_throttle,
+ .unthrottle = option_rx_unthrottle,
+ .ioctl = option_ioctl,
+ .set_termios = option_set_termios,
+ .break_ctl = option_break_ctl,
+ .tiocmget = option_tiocmget,
+ .tiocmset = option_tiocmset,
+ .attach = option_startup,
+ .shutdown = option_shutdown,
+ .read_int_callback = option_instat_callback,
+};
+
+static int debug;
+
+/* per port private data */
+
+#define N_IN_URB 4
+#define N_OUT_URB 1
+#define IN_BUFLEN 1024
+#define OUT_BUFLEN 1024
+
+struct option_port_private {
+ /* Input endpoints and buffer for this port */
+ struct urb *in_urbs[N_IN_URB];
+ char in_buffer[N_IN_URB][IN_BUFLEN];
+ /* Output endpoints and buffer for this port */
+ struct urb *out_urbs[N_OUT_URB];
+ char out_buffer[N_OUT_URB][OUT_BUFLEN];
+
+ /* Settings for the port */
+ int rts_state; /* Handshaking pins (outputs) */
+ int dtr_state;
+ int cts_state; /* Handshaking pins (inputs) */
+ int dsr_state;
+ int dcd_state;
+ int ri_state;
+ // int break_on;
+
+ unsigned long tx_start_time[N_OUT_URB];
+};
+
+
+/* Functions used by new usb-serial code. */
+static int __init
+option_init (void)
+{
+ int retval;
+ retval = usb_serial_register(&option_3port_device);
+ if (retval)
+ goto failed_3port_device_register;
+ retval = usb_register(&option_driver);
+ if (retval)
+ goto failed_driver_register;
+
+ info(DRIVER_DESC ": " DRIVER_VERSION);
+
+ return 0;
+
+failed_driver_register:
+ usb_serial_deregister (&option_3port_device);
+failed_3port_device_register:
+ return retval;
+}
+
+static void __exit
+option_exit (void)
+{
+ usb_deregister (&option_driver);
+ usb_serial_deregister (&option_3port_device);
+}
+
+module_init(option_init);
+module_exit(option_exit);
+
+static void
+option_rx_throttle (struct usb_serial_port *port)
+{
+ dbg("%s", __FUNCTION__);
+}
+
+
+static void
+option_rx_unthrottle (struct usb_serial_port *port)
+{
+ dbg("%s", __FUNCTION__);
+}
+
+
+static void
+option_break_ctl (struct usb_serial_port *port, int break_state)
+{
+ /* Unfortunately, I don't know how to send a break */
+ dbg("%s", __FUNCTION__);
+}
+
+
+static void
+option_set_termios (struct usb_serial_port *port,
+ struct termios *old_termios)
+{
+ dbg("%s", __FUNCTION__);
+
+ option_send_setup(port);
+}
+
+static int
+option_tiocmget(struct usb_serial_port *port, struct file *file)
+{
+ unsigned int value;
+ struct option_port_private *portdata;
+
+ portdata = usb_get_serial_port_data(port);
+
+ value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
+ ((portdata->dtr_state) ? TIOCM_DTR : 0) |
+ ((portdata->cts_state) ? TIOCM_CTS : 0) |
+ ((portdata->dsr_state) ? TIOCM_DSR : 0) |
+ ((portdata->dcd_state) ? TIOCM_CAR : 0) |
+ ((portdata->ri_state) ? TIOCM_RNG : 0);
+
+ return value;
+}
+
+static int
+option_tiocmset (struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ struct option_port_private *portdata;
+
+ portdata = usb_get_serial_port_data(port);
+
+ if (set & TIOCM_RTS)
+ portdata->rts_state = 1;
+ if (set & TIOCM_DTR)
+ portdata->dtr_state = 1;
+
+ if (clear & TIOCM_RTS)
+ portdata->rts_state = 0;
+ if (clear & TIOCM_DTR)
+ portdata->dtr_state = 0;
+ return option_send_setup(port);
+}
+
+static int
+option_ioctl (struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ return -ENOIOCTLCMD;
+}
+
+/* Write */
+static int
+option_write(struct usb_serial_port *port,
+ const unsigned char *buf, int count)
+{
+ struct option_port_private *portdata;
+ int i;
+ int left, todo;
+ struct urb *this_urb = NULL; /* spurious */
+ int err;
+
+ portdata = usb_get_serial_port_data(port);
+
+ dbg("%s: write (%d chars)", __FUNCTION__, count);
+
+#if 0
+ spin_lock(&port->lock);
+ if (port->write_urb_busy) {
+ spin_unlock(&port->lock);
+ dbg("%s: already writing", __FUNCTION__);
+ return 0;
+ }
+ port->write_urb_busy = 1;
+ spin_unlock(&port->lock);
+#endif
+
+ i = 0;
+ left = count;
+ while (left>0) {
+ todo = left;
+ if (todo > OUT_BUFLEN)
+ todo = OUT_BUFLEN;
+
+ for (;i < N_OUT_URB; i++) {
+ /* Check we have a valid urb/endpoint before we use it... */
+ this_urb = portdata->out_urbs[i];
+ if (this_urb->status != -EINPROGRESS)
+ break;
+ if (this_urb->transfer_flags & URB_ASYNC_UNLINK)
+ continue;
+ if (time_before(jiffies, portdata->tx_start_time[i] + 10 * HZ))
+ continue;
+ this_urb->transfer_flags |= URB_ASYNC_UNLINK;
+ usb_unlink_urb(this_urb);
+ }
+
+ if (i == N_OUT_URB) {
+ /* no bulk out free! */
+ dbg("%s: no output urb -- left %d", __FUNCTION__,count-left);
+#if 0
+ port->write_urb_busy = 0;
+#endif
+ return count-left;
+ }
+
+ dbg("%s: endpoint %d buf %d", __FUNCTION__, usb_pipeendpoint(this_urb->pipe), i);
+
+ memcpy (this_urb->transfer_buffer, buf, todo);
+
+ /* send the data out the bulk port */
+ this_urb->transfer_buffer_length = todo;
+
+ this_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ this_urb->dev = port->serial->dev;
+ err = usb_submit_urb(this_urb, GFP_ATOMIC);
+ if (err) {
+ dbg("usb_submit_urb %p (write bulk) failed (%d,, has %d)", this_urb, err, this_urb->status);
+ continue;
+ }
+ portdata->tx_start_time[i] = jiffies;
+ buf += todo;
+ left -= todo;
+ }
+
+ count -= left;
+#if 0
+ port->write_urb_busy = 0;
+#endif
+ dbg("%s: wrote (did %d)", __FUNCTION__, count);
+ return count;
+}
+
+static void
+option_indat_callback (struct urb *urb, struct pt_regs *regs)
+{
+ int i, err;
+ int endpoint;
+ struct usb_serial_port *port;
+ struct tty_struct *tty;
+ unsigned char *data = urb->transfer_buffer;
+
+ dbg("%s: %p", __FUNCTION__, urb);
+
+ endpoint = usb_pipeendpoint(urb->pipe);
+ port = (struct usb_serial_port *) urb->context;
+
+ if (urb->status) {
+ dbg("%s: nonzero status: %d on endpoint %02x.",
+ __FUNCTION__, urb->status, endpoint);
+ } else {
+ tty = port->tty;
+ if (urb->actual_length) {
+ for (i = 0; i < urb->actual_length ; ++i) {
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ tty_flip_buffer_push(tty);
+ tty_insert_flip_char(tty, data[i], 0);
+ }
+ tty_flip_buffer_push(tty);
+ } else {
+ dbg("%s: empty read urb received", __FUNCTION__);
+ }
+
+ /* Resubmit urb so we continue receiving */
+ if (port->open_count && urb->status != -ESHUTDOWN) {
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err)
+ printk(KERN_ERR "%s: resubmit read urb failed. (%d)", __FUNCTION__, err);
+ }
+ }
+ return;
+}
+
+static void
+option_outdat_callback (struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_serial_port *port;
+
+ dbg("%s", __FUNCTION__);
+
+ port = (struct usb_serial_port *) urb->context;
+
+ if (port->open_count)
+ schedule_work(&port->work);
+}
+
+static void
+option_instat_callback (struct urb *urb, struct pt_regs *regs)
+{
+ int err;
+ struct usb_serial_port *port = (struct usb_serial_port *) urb->context;
+ struct option_port_private *portdata = usb_get_serial_port_data(port);
+ struct usb_serial *serial = port->serial;
+
+ dbg("%s", __FUNCTION__);
+ dbg("%s: urb %p port %p has data %p", __FUNCTION__,urb,port,portdata);
+
+ if (urb->status == 0) {
+ struct usb_ctrlrequest *req_pkt =
+ (struct usb_ctrlrequest *)urb->transfer_buffer;
+
+ if (!req_pkt) {
+ dbg("%s: NULL req_pkt\n", __FUNCTION__);
+ return;
+ }
+ if ((req_pkt->bRequestType == 0xA1) && (req_pkt->bRequest == 0x20)) {
+ int old_dcd_state;
+ unsigned char signals = *((unsigned char *)
+ urb->transfer_buffer + sizeof(struct usb_ctrlrequest));
+
+ dbg("%s: signal x%x", __FUNCTION__, signals);
+
+ old_dcd_state = portdata->dcd_state;
+ portdata->cts_state = 1;
+ portdata->dcd_state = ((signals & 0x01) ? 1 : 0);
+ portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
+ portdata->ri_state = ((signals & 0x08) ? 1 : 0);
+
+ if (port->tty && !C_CLOCAL(port->tty)
+ && old_dcd_state && !portdata->dcd_state) {
+ tty_hangup(port->tty);
+ }
+ } else
+ dbg("%s: type %x req %x", __FUNCTION__, req_pkt->bRequestType,req_pkt->bRequest);
+ } else
+ dbg("%s: error %d", __FUNCTION__, urb->status);
+
+ /* Resubmit urb so we continue receiving IRQ data */
+ if (urb->status != -ESHUTDOWN) {
+ urb->dev = serial->dev;
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err)
+ dbg("%s: resubmit intr urb failed. (%d)", __FUNCTION__, err);
+ }
+}
+
+
+static int
+option_write_room (struct usb_serial_port *port)
+{
+ struct option_port_private *portdata;
+ int i;
+ int data_len = 0;
+ struct urb *this_urb;
+
+ portdata = usb_get_serial_port_data(port);
+
+ for (i=0; i < N_OUT_URB; i++)
+ this_urb = portdata->out_urbs[i];
+ if (this_urb && this_urb->status != -EINPROGRESS)
+ data_len += OUT_BUFLEN;
+
+ dbg("%s: %d", __FUNCTION__, data_len);
+ return data_len;
+}
+
+
+static int
+option_chars_in_buffer (struct usb_serial_port *port)
+{
+ struct option_port_private *portdata;
+ int i;
+ int data_len = 0;
+ struct urb *this_urb;
+
+ portdata = usb_get_serial_port_data(port);
+
+ for (i=0; i < N_OUT_URB; i++)
+ this_urb = portdata->out_urbs[i];
+ if (this_urb && this_urb->status == -EINPROGRESS)
+ data_len += this_urb->transfer_buffer_length;
+
+ dbg("%s: %d", __FUNCTION__, data_len);
+ return data_len;
+}
+
+
+static int
+option_open (struct usb_serial_port *port, struct file *filp)
+{
+ struct option_port_private *portdata;
+ struct usb_serial *serial = port->serial;
+ int i, err;
+ struct urb *urb;
+
+ portdata = usb_get_serial_port_data(port);
+
+ dbg("%s", __FUNCTION__);
+
+ /* Set some sane defaults */
+ portdata->rts_state = 1;
+ portdata->dtr_state = 1;
+
+ /* Reset low level data toggle and start reading from endpoints */
+ for (i = 0; i < N_IN_URB; i++) {
+ urb = portdata->in_urbs[i];
+ if (! urb)
+ continue;
+ if (urb->dev != serial->dev) {
+ dbg("%s: dev %p != %p", __FUNCTION__, urb->dev, serial->dev);
+ continue;
+ }
+
+ /* make sure endpoint data toggle is synchronized with the device */
+
+ usb_clear_halt(urb->dev, urb->pipe);
+
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err) {
+ dbg("%s: submit urb %d failed (%d) %d", __FUNCTION__, i, err,
+ urb->transfer_buffer_length);
+ }
+ }
+
+ /* Reset low level data toggle on out endpoints */
+ for (i = 0; i < N_OUT_URB; i++) {
+ urb = portdata->out_urbs[i];
+ if (! urb)
+ continue;
+ urb->dev = serial->dev;
+ /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe), 0); */
+ }
+
+ port->tty->low_latency = 1;
+
+ option_send_setup(port);
+
+ return (0);
+}
+
+static inline void
+stop_urb(struct urb *urb)
+{
+ if (urb && urb->status == -EINPROGRESS) {
+ urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ usb_kill_urb(urb);
+ }
+}
+
+static void
+option_close(struct usb_serial_port *port, struct file *filp)
+{
+ int i;
+ struct usb_serial *serial = port->serial;
+ struct option_port_private *portdata;
+
+ dbg("%s", __FUNCTION__);
+ portdata = usb_get_serial_port_data(port);
+
+ portdata->rts_state = 0;
+ portdata->dtr_state = 0;
+
+ if (serial->dev) {
+ option_send_setup(port);
+
+ /* Stop reading/writing urbs */
+ for (i = 0; i < N_IN_URB; i++)
+ stop_urb(portdata->in_urbs[i]);
+ for (i = 0; i < N_OUT_URB; i++)
+ stop_urb(portdata->out_urbs[i]);
+ }
+ port->tty = NULL;
+}
+
+
+/* Helper functions used by option_setup_urbs */
+static struct urb *
+option_setup_urb (struct usb_serial *serial, int endpoint,
+ int dir, void *ctx, char *buf, int len,
+ void (*callback)(struct urb *, struct pt_regs *regs))
+{
+ struct urb *urb;
+
+ if (endpoint == -1)
+ return NULL; /* endpoint not needed */
+
+ urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
+ if (urb == NULL) {
+ dbg("%s: alloc for endpoint %d failed.", __FUNCTION__, endpoint);
+ return NULL;
+ }
+
+ /* Fill URB using supplied data. */
+ usb_fill_bulk_urb(urb, serial->dev,
+ usb_sndbulkpipe(serial->dev, endpoint) | dir,
+ buf, len, callback, ctx);
+
+ return urb;
+}
+
+/* Setup urbs */
+static void
+option_setup_urbs(struct usb_serial *serial)
+{
+ int j;
+ struct usb_serial_port *port;
+ struct option_port_private *portdata;
+
+ dbg("%s", __FUNCTION__);
+
+ port = serial->port[0];
+ portdata = usb_get_serial_port_data(port);
+
+ /* Do indat endpoints first */
+ for (j = 0; j <= N_IN_URB; ++j) {
+ portdata->in_urbs[j] = option_setup_urb (serial,
+ port->bulk_in_endpointAddress, USB_DIR_IN, port,
+ portdata->in_buffer[j], IN_BUFLEN, option_indat_callback);
+ }
+
+ /* outdat endpoints */
+ for (j = 0; j <= N_OUT_URB; ++j) {
+ portdata->out_urbs[j] = option_setup_urb (serial,
+ port->bulk_out_endpointAddress, USB_DIR_OUT, port,
+ portdata->out_buffer[j], OUT_BUFLEN, option_outdat_callback);
+ }
+}
+
+
+static int
+option_send_setup(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ struct option_port_private *portdata;
+
+ dbg("%s", __FUNCTION__);
+
+ portdata = usb_get_serial_port_data(port);
+
+ if (port->tty) {
+ int val = 0;
+ if (portdata->dtr_state)
+ val |= 0x01;
+ if (portdata->rts_state)
+ val |= 0x02;
+
+ return usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ 0x22,0x21,val,0,NULL,0,USB_CTRL_SET_TIMEOUT);
+ }
+
+ return 0;
+}
+
+
+static int
+option_startup (struct usb_serial *serial)
+{
+ int i, err;
+ struct usb_serial_port *port;
+ struct option_port_private *portdata;
+
+ dbg("%s", __FUNCTION__);
+
+ /* Now setup per port private data */
+ for (i = 0; i < serial->num_ports; i++) {
+ port = serial->port[i];
+ portdata = kmalloc(sizeof(struct option_port_private), GFP_KERNEL);
+ if (!portdata) {
+ dbg("%s: kmalloc for option_port_private (%d) failed!.", __FUNCTION__, i);
+ return (1);
+ }
+ memset(portdata, 0, sizeof(struct option_port_private));
+
+ usb_set_serial_port_data(port, portdata);
+
+ if (! port->interrupt_in_urb)
+ continue;
+ err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
+ if (err)
+ dbg("%s: submit irq_in urb failed %d", __FUNCTION__, err);
+ }
+
+ option_setup_urbs(serial);
+
+ return (0);
+}
+
+static void
+option_shutdown (struct usb_serial *serial)
+{
+ int i, j;
+ struct usb_serial_port *port;
+ struct option_port_private *portdata;
+
+ dbg("%s", __FUNCTION__);
+
+ /* Stop reading/writing urbs */
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ portdata = usb_get_serial_port_data(port);
+ for (j = 0; j < N_IN_URB; j++)
+ stop_urb(portdata->in_urbs[j]);
+ for (j = 0; j < N_OUT_URB; j++)
+ stop_urb(portdata->out_urbs[j]);
+ }
+
+ /* Now free them */
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ portdata = usb_get_serial_port_data(port);
+
+ for (j = 0; j < N_IN_URB; j++) {
+ if (portdata->in_urbs[j]) {
+ usb_free_urb(portdata->in_urbs[j]);
+ portdata->in_urbs[j] = NULL;
+ }
+ }
+ for (j = 0; j < N_OUT_URB; j++) {
+ if (portdata->out_urbs[j]) {
+ usb_free_urb(portdata->out_urbs[j]);
+ portdata->out_urbs[j] = NULL;
+ }
+ }
+ }
+
+ /* Now free per port private data */
+ for (i = 0; i < serial->num_ports; i++) {
+ port = serial->port[i];
+ kfree(usb_get_serial_port_data(port));
+ }
+}
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug messages");
+
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index d2891f4..9fcc7bd 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -862,6 +862,15 @@
US_SC_DEVICE, US_PR_BULK, NULL,
US_FL_NEED_OVERRIDE ),
+/* Reported by Filippo Bardelli <filibard@libero.it>
+ * The device reports a subclass of RBC, which is wrong.
+ */
+UNUSUAL_DEV( 0x090a, 0x1050, 0x0100, 0x0100,
+ "Trumpion Microelectronics, Inc.",
+ "33520 USB Digital Voice Recorder",
+ US_SC_UFI, US_PR_DEVICE, NULL,
+ 0),
+
/* Trumpion Microelectronics MP3 player (felipe_alfaro@linuxmail.org) */
UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
"Trumpion",
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index ee25b9e..47a6b12 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -2374,10 +2374,9 @@
} while ( rinfo->fb_base == 0 &&
((rinfo->mapped_vram /=2) >= MIN_MAPPED_VRAM) );
- if (rinfo->fb_base)
- memset_io(rinfo->fb_base, 0, rinfo->mapped_vram);
- else {
- printk (KERN_ERR "radeonfb (%s): cannot map FB\n", pci_name(rinfo->pdev));
+ if (rinfo->fb_base == NULL) {
+ printk (KERN_ERR "radeonfb (%s): cannot map FB\n",
+ pci_name(rinfo->pdev));
ret = -EIO;
goto err_unmap_rom;
}
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c
index c78a2c5..277d733 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbsysfs.c
@@ -241,7 +241,7 @@
struct fb_info *fb_info =
(struct fb_info *)class_get_devdata(class_device);
return snprintf(buf, PAGE_SIZE, "%d,%d\n", fb_info->var.xres_virtual,
- fb_info->var.xres_virtual);
+ fb_info->var.yres_virtual);
}
static ssize_t store_cmap(struct class_device *class_device, const char * buf,
diff --git a/drivers/video/macmodes.c b/drivers/video/macmodes.c
index de5a0f3..2fc7108 100644
--- a/drivers/video/macmodes.c
+++ b/drivers/video/macmodes.c
@@ -387,3 +387,4 @@
}
EXPORT_SYMBOL(mac_find_mode);
+MODULE_LICENSE("GPL");
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index c374be5..f8f6b6b 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1125,7 +1125,7 @@
return file->f_op->write(file, addr, nr, &file->f_pos) == nr;
}
-static int dump_seek(struct file *file, off_t off)
+static int dump_seek(struct file *file, loff_t off)
{
if (file->f_op->llseek) {
if (file->f_op->llseek(file, off, 0) != off)
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index f0cd67d..c8998dc 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -520,7 +520,7 @@
DBG_FLT("BINFMT_FLAT: ROM mapping of file (we hope)\n");
down_write(¤t->mm->mmap_sem);
- textpos = do_mmap(bprm->file, 0, text_len, PROT_READ|PROT_EXEC, 0, 0);
+ textpos = do_mmap(bprm->file, 0, text_len, PROT_READ|PROT_EXEC, MAP_SHARED, 0);
up_write(¤t->mm->mmap_sem);
if (!textpos || textpos >= (unsigned long) -4096) {
if (!textpos)
@@ -532,7 +532,7 @@
down_write(¤t->mm->mmap_sem);
realdatastart = do_mmap(0, 0, data_len + extra +
MAX_SHARED_LIBS * sizeof(unsigned long),
- PROT_READ|PROT_WRITE|PROT_EXEC, 0, 0);
+ PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0);
up_write(¤t->mm->mmap_sem);
if (realdatastart == 0 || realdatastart >= (unsigned long)-4096) {
@@ -574,7 +574,7 @@
down_write(¤t->mm->mmap_sem);
textpos = do_mmap(0, 0, text_len + data_len + extra +
MAX_SHARED_LIBS * sizeof(unsigned long),
- PROT_READ | PROT_EXEC | PROT_WRITE, 0, 0);
+ PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0);
up_write(¤t->mm->mmap_sem);
if (!textpos || textpos >= (unsigned long) -4096) {
if (!textpos)
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 95483ba..dab4774 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -6,7 +6,8 @@
recommended, unmount and rmmod cifs will kill them when they are
no longer needed). Fix readdir to ASCII servers (ie older servers
which do not support Unicode) and also require asterik.
-
+Fix out of memory case in which data could be written one page
+off in the page cache.
Version 1.33
------------
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index d00b3bf..78af585 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -96,5 +96,5 @@
extern ssize_t cifs_listxattr(struct dentry *, char *, size_t);
extern int cifs_ioctl (struct inode * inode, struct file * filep,
unsigned int command, unsigned long arg);
-#define CIFS_VERSION "1.34"
+#define CIFS_VERSION "1.35"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index dde2d25..30ab70c 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -1352,6 +1352,8 @@
GFP_KERNEL)) {
page_cache_release(page);
cFYI(1, ("Add page cache failed"));
+ data += PAGE_CACHE_SIZE;
+ bytes_read -= PAGE_CACHE_SIZE;
continue;
}
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index b8b78cb..8d336a9 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -82,12 +82,12 @@
/* get new inode */
if (*pinode == NULL) {
*pinode = new_inode(sb);
- if(*pinode == NULL)
+ if (*pinode == NULL)
return -ENOMEM;
/* Is an i_ino of zero legal? */
/* Are there sanity checks we can use to ensure that
the server is really filling in that field? */
- if(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
(*pinode)->i_ino =
(unsigned long)findData.UniqueId;
} /* note ino incremented to unique num in new_inode */
@@ -134,7 +134,7 @@
inode->i_gid = le64_to_cpu(findData.Gid);
inode->i_nlink = le64_to_cpu(findData.Nlinks);
- if(is_size_safe_to_change(cifsInfo)) {
+ if (is_size_safe_to_change(cifsInfo)) {
/* can not safely change the file size here if the
client is writing to it due to potential races */
@@ -162,7 +162,7 @@
if (S_ISREG(inode->i_mode)) {
cFYI(1, (" File inode "));
inode->i_op = &cifs_file_inode_ops;
- if(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
inode->i_fop = &cifs_file_direct_ops;
else
inode->i_fop = &cifs_file_ops;
@@ -198,17 +198,17 @@
pTcon = cifs_sb->tcon;
cFYI(1,("Getting info on %s ", search_path));
- if((pfindData == NULL) && (*pinode != NULL)) {
- if(CIFS_I(*pinode)->clientCanCacheRead) {
+ if ((pfindData == NULL) && (*pinode != NULL)) {
+ if (CIFS_I(*pinode)->clientCanCacheRead) {
cFYI(1,("No need to revalidate cached inode sizes"));
return rc;
}
}
/* if file info not passed in then get it from server */
- if(pfindData == NULL) {
+ if (pfindData == NULL) {
buf = kmalloc(sizeof(FILE_ALL_INFO), GFP_KERNEL);
- if(buf == NULL)
+ if (buf == NULL)
return -ENOMEM;
pfindData = (FILE_ALL_INFO *)buf;
/* could do find first instead but this returns more info */
@@ -268,7 +268,7 @@
IndexNumber field is not guaranteed unique? */
#ifdef CONFIG_CIFS_EXPERIMENTAL
- if(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM){
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM){
int rc1 = 0;
__u64 inode_num;
@@ -277,7 +277,7 @@
cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
- if(rc1) {
+ if (rc1) {
cFYI(1,("GetSrvInodeNum rc %d", rc1));
/* BB EOPNOSUPP disable SERVER_INUM? */
} else /* do we need cast or hash to ino? */
@@ -355,7 +355,7 @@
if (S_ISREG(inode->i_mode)) {
cFYI(1, (" File inode "));
inode->i_op = &cifs_file_inode_ops;
- if(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
inode->i_fop = &cifs_file_direct_ops;
else
inode->i_fop = &cifs_file_ops;
@@ -422,7 +422,7 @@
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
if (!rc) {
- if(direntry->d_inode)
+ if (direntry->d_inode)
direntry->d_inode->i_nlink--;
} else if (rc == -ENOENT) {
d_drop(direntry);
@@ -441,7 +441,7 @@
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
CIFSSMBClose(xid, pTcon, netfid);
- if(direntry->d_inode)
+ if (direntry->d_inode)
direntry->d_inode->i_nlink--;
}
} else if (rc == -EACCES) {
@@ -496,7 +496,7 @@
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (!rc) {
- if(direntry->d_inode)
+ if (direntry->d_inode)
direntry->d_inode->i_nlink--;
} else if (rc == -ETXTBSY) {
int oplock = FALSE;
@@ -517,14 +517,14 @@
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
CIFSSMBClose(xid, pTcon, netfid);
- if(direntry->d_inode)
+ if (direntry->d_inode)
direntry->d_inode->i_nlink--;
}
/* BB if rc = -ETXTBUSY goto the rename logic BB */
}
}
}
- if(direntry->d_inode) {
+ if (direntry->d_inode) {
cifsInode = CIFS_I(direntry->d_inode);
cifsInode->time = 0; /* will force revalidate to get info
when needed */
@@ -582,7 +582,7 @@
if (direntry->d_inode)
direntry->d_inode->i_nlink = 2;
if (cifs_sb->tcon->ses->capabilities & CAP_UNIX)
- if(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
CIFSSMBUnixSetPerms(xid, pTcon, full_path,
mode,
(__u64)current->euid,
diff --git a/fs/jbd/checkpoint.c b/fs/jbd/checkpoint.c
index 98d8304..5a97e34 100644
--- a/fs/jbd/checkpoint.c
+++ b/fs/jbd/checkpoint.c
@@ -188,7 +188,6 @@
} else {
jbd_unlock_bh_state(bh);
}
- jh = next_jh;
} while (jh != last_jh);
return ret;
@@ -339,8 +338,10 @@
}
} while (jh != last_jh && !retry);
- if (batch_count)
+ if (batch_count) {
__flush_batch(journal, bhs, &batch_count);
+ retry = 1;
+ }
/*
* If someone cleaned up this transaction while we slept, we're
diff --git a/fs/mpage.c b/fs/mpage.c
index b92c0e6..bb9aebe 100644
--- a/fs/mpage.c
+++ b/fs/mpage.c
@@ -79,8 +79,11 @@
if (--bvec >= bio->bi_io_vec)
prefetchw(&bvec->bv_page->flags);
- if (!uptodate)
+ if (!uptodate){
SetPageError(page);
+ if (page->mapping)
+ set_bit(AS_EIO, &page->mapping->flags);
+ }
end_page_writeback(page);
} while (bvec >= bio->bi_io_vec);
bio_put(bio);
diff --git a/fs/namei.c b/fs/namei.c
index dd78f01..a7f7f44 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -493,12 +493,21 @@
return PTR_ERR(link);
}
-static inline int __do_follow_link(struct dentry *dentry, struct nameidata *nd)
+struct path {
+ struct vfsmount *mnt;
+ struct dentry *dentry;
+};
+
+static inline int __do_follow_link(struct path *path, struct nameidata *nd)
{
int error;
+ struct dentry *dentry = path->dentry;
- touch_atime(nd->mnt, dentry);
+ touch_atime(path->mnt, dentry);
nd_set_link(nd, NULL);
+
+ if (path->mnt == nd->mnt)
+ mntget(path->mnt);
error = dentry->d_inode->i_op->follow_link(dentry, nd);
if (!error) {
char *s = nd_get_link(nd);
@@ -507,6 +516,8 @@
if (dentry->d_inode->i_op->put_link)
dentry->d_inode->i_op->put_link(dentry, nd);
}
+ dput(dentry);
+ mntput(path->mnt);
return error;
}
@@ -518,7 +529,7 @@
* Without that kind of total limit, nasty chains of consecutive
* symlinks can cause almost arbitrarily long lookups.
*/
-static inline int do_follow_link(struct dentry *dentry, struct nameidata *nd)
+static inline int do_follow_link(struct path *path, struct nameidata *nd)
{
int err = -ELOOP;
if (current->link_count >= MAX_NESTED_LINKS)
@@ -527,17 +538,20 @@
goto loop;
BUG_ON(nd->depth >= MAX_NESTED_LINKS);
cond_resched();
- err = security_inode_follow_link(dentry, nd);
+ err = security_inode_follow_link(path->dentry, nd);
if (err)
goto loop;
current->link_count++;
current->total_link_count++;
nd->depth++;
- err = __do_follow_link(dentry, nd);
+ err = __do_follow_link(path, nd);
current->link_count--;
nd->depth--;
return err;
loop:
+ dput(path->dentry);
+ if (path->mnt != nd->mnt)
+ mntput(path->mnt);
path_release(nd);
return err;
}
@@ -565,87 +579,91 @@
/* no need for dcache_lock, as serialization is taken care in
* namespace.c
*/
-static int follow_mount(struct vfsmount **mnt, struct dentry **dentry)
+static int __follow_mount(struct path *path)
{
int res = 0;
- while (d_mountpoint(*dentry)) {
- struct vfsmount *mounted = lookup_mnt(*mnt, *dentry);
+ while (d_mountpoint(path->dentry)) {
+ struct vfsmount *mounted = lookup_mnt(path->mnt, path->dentry);
if (!mounted)
break;
- mntput(*mnt);
- *mnt = mounted;
- dput(*dentry);
- *dentry = dget(mounted->mnt_root);
+ dput(path->dentry);
+ if (res)
+ mntput(path->mnt);
+ path->mnt = mounted;
+ path->dentry = dget(mounted->mnt_root);
res = 1;
}
return res;
}
+static void follow_mount(struct vfsmount **mnt, struct dentry **dentry)
+{
+ while (d_mountpoint(*dentry)) {
+ struct vfsmount *mounted = lookup_mnt(*mnt, *dentry);
+ if (!mounted)
+ break;
+ dput(*dentry);
+ mntput(*mnt);
+ *mnt = mounted;
+ *dentry = dget(mounted->mnt_root);
+ }
+}
+
/* no need for dcache_lock, as serialization is taken care in
* namespace.c
*/
-static inline int __follow_down(struct vfsmount **mnt, struct dentry **dentry)
+int follow_down(struct vfsmount **mnt, struct dentry **dentry)
{
struct vfsmount *mounted;
mounted = lookup_mnt(*mnt, *dentry);
if (mounted) {
+ dput(*dentry);
mntput(*mnt);
*mnt = mounted;
- dput(*dentry);
*dentry = dget(mounted->mnt_root);
return 1;
}
return 0;
}
-int follow_down(struct vfsmount **mnt, struct dentry **dentry)
-{
- return __follow_down(mnt,dentry);
-}
-
-static inline void follow_dotdot(struct vfsmount **mnt, struct dentry **dentry)
+static inline void follow_dotdot(struct nameidata *nd)
{
while(1) {
struct vfsmount *parent;
- struct dentry *old = *dentry;
+ struct dentry *old = nd->dentry;
read_lock(¤t->fs->lock);
- if (*dentry == current->fs->root &&
- *mnt == current->fs->rootmnt) {
+ if (nd->dentry == current->fs->root &&
+ nd->mnt == current->fs->rootmnt) {
read_unlock(¤t->fs->lock);
break;
}
read_unlock(¤t->fs->lock);
spin_lock(&dcache_lock);
- if (*dentry != (*mnt)->mnt_root) {
- *dentry = dget((*dentry)->d_parent);
+ if (nd->dentry != nd->mnt->mnt_root) {
+ nd->dentry = dget(nd->dentry->d_parent);
spin_unlock(&dcache_lock);
dput(old);
break;
}
spin_unlock(&dcache_lock);
spin_lock(&vfsmount_lock);
- parent = (*mnt)->mnt_parent;
- if (parent == *mnt) {
+ parent = nd->mnt->mnt_parent;
+ if (parent == nd->mnt) {
spin_unlock(&vfsmount_lock);
break;
}
mntget(parent);
- *dentry = dget((*mnt)->mnt_mountpoint);
+ nd->dentry = dget(nd->mnt->mnt_mountpoint);
spin_unlock(&vfsmount_lock);
dput(old);
- mntput(*mnt);
- *mnt = parent;
+ mntput(nd->mnt);
+ nd->mnt = parent;
}
- follow_mount(mnt, dentry);
+ follow_mount(&nd->mnt, &nd->dentry);
}
-struct path {
- struct vfsmount *mnt;
- struct dentry *dentry;
-};
-
/*
* It's more convoluted than I'd like it to be, but... it's still fairly
* small and for now I'd prefer to have fast path as straight as possible.
@@ -664,6 +682,7 @@
done:
path->mnt = mnt;
path->dentry = dentry;
+ __follow_mount(path);
return 0;
need_lookup:
@@ -751,7 +770,7 @@
case 2:
if (this.name[1] != '.')
break;
- follow_dotdot(&nd->mnt, &nd->dentry);
+ follow_dotdot(nd);
inode = nd->dentry->d_inode;
/* fallthrough */
case 1:
@@ -771,8 +790,6 @@
err = do_lookup(nd, &this, &next);
if (err)
break;
- /* Check mountpoints.. */
- follow_mount(&next.mnt, &next.dentry);
err = -ENOENT;
inode = next.dentry->d_inode;
@@ -783,10 +800,7 @@
goto out_dput;
if (inode->i_op->follow_link) {
- mntget(next.mnt);
- err = do_follow_link(next.dentry, nd);
- dput(next.dentry);
- mntput(next.mnt);
+ err = do_follow_link(&next, nd);
if (err)
goto return_err;
err = -ENOENT;
@@ -798,6 +812,8 @@
break;
} else {
dput(nd->dentry);
+ if (nd->mnt != next.mnt)
+ mntput(nd->mnt);
nd->mnt = next.mnt;
nd->dentry = next.dentry;
}
@@ -819,7 +835,7 @@
case 2:
if (this.name[1] != '.')
break;
- follow_dotdot(&nd->mnt, &nd->dentry);
+ follow_dotdot(nd);
inode = nd->dentry->d_inode;
/* fallthrough */
case 1:
@@ -833,19 +849,17 @@
err = do_lookup(nd, &this, &next);
if (err)
break;
- follow_mount(&next.mnt, &next.dentry);
inode = next.dentry->d_inode;
if ((lookup_flags & LOOKUP_FOLLOW)
&& inode && inode->i_op && inode->i_op->follow_link) {
- mntget(next.mnt);
- err = do_follow_link(next.dentry, nd);
- dput(next.dentry);
- mntput(next.mnt);
+ err = do_follow_link(&next, nd);
if (err)
goto return_err;
inode = nd->dentry->d_inode;
} else {
dput(nd->dentry);
+ if (nd->mnt != next.mnt)
+ mntput(nd->mnt);
nd->mnt = next.mnt;
nd->dentry = next.dentry;
}
@@ -885,6 +899,8 @@
return 0;
out_dput:
dput(next.dentry);
+ if (nd->mnt != next.mnt)
+ mntput(next.mnt);
break;
}
path_release(nd);
@@ -1398,7 +1414,7 @@
int open_namei(const char * pathname, int flag, int mode, struct nameidata *nd)
{
int acc_mode, error = 0;
- struct dentry *dentry;
+ struct path path;
struct dentry *dir;
int count = 0;
@@ -1442,23 +1458,24 @@
dir = nd->dentry;
nd->flags &= ~LOOKUP_PARENT;
down(&dir->d_inode->i_sem);
- dentry = __lookup_hash(&nd->last, nd->dentry, nd);
+ path.dentry = __lookup_hash(&nd->last, nd->dentry, nd);
+ path.mnt = nd->mnt;
do_last:
- error = PTR_ERR(dentry);
- if (IS_ERR(dentry)) {
+ error = PTR_ERR(path.dentry);
+ if (IS_ERR(path.dentry)) {
up(&dir->d_inode->i_sem);
goto exit;
}
/* Negative dentry, just create the file */
- if (!dentry->d_inode) {
+ if (!path.dentry->d_inode) {
if (!IS_POSIXACL(dir->d_inode))
mode &= ~current->fs->umask;
- error = vfs_create(dir->d_inode, dentry, mode, nd);
+ error = vfs_create(dir->d_inode, path.dentry, mode, nd);
up(&dir->d_inode->i_sem);
dput(nd->dentry);
- nd->dentry = dentry;
+ nd->dentry = path.dentry;
if (error)
goto exit;
/* Don't check for write permission, don't truncate */
@@ -1476,22 +1493,24 @@
if (flag & O_EXCL)
goto exit_dput;
- if (d_mountpoint(dentry)) {
+ if (__follow_mount(&path)) {
error = -ELOOP;
if (flag & O_NOFOLLOW)
goto exit_dput;
- while (__follow_down(&nd->mnt,&dentry) && d_mountpoint(dentry));
}
error = -ENOENT;
- if (!dentry->d_inode)
+ if (!path.dentry->d_inode)
goto exit_dput;
- if (dentry->d_inode->i_op && dentry->d_inode->i_op->follow_link)
+ if (path.dentry->d_inode->i_op && path.dentry->d_inode->i_op->follow_link)
goto do_link;
dput(nd->dentry);
- nd->dentry = dentry;
+ nd->dentry = path.dentry;
+ if (nd->mnt != path.mnt)
+ mntput(nd->mnt);
+ nd->mnt = path.mnt;
error = -EISDIR;
- if (dentry->d_inode && S_ISDIR(dentry->d_inode->i_mode))
+ if (path.dentry->d_inode && S_ISDIR(path.dentry->d_inode->i_mode))
goto exit;
ok:
error = may_open(nd, acc_mode, flag);
@@ -1500,7 +1519,9 @@
return 0;
exit_dput:
- dput(dentry);
+ dput(path.dentry);
+ if (nd->mnt != path.mnt)
+ mntput(path.mnt);
exit:
path_release(nd);
return error;
@@ -1520,18 +1541,15 @@
* are done. Procfs-like symlinks just set LAST_BIND.
*/
nd->flags |= LOOKUP_PARENT;
- error = security_inode_follow_link(dentry, nd);
+ error = security_inode_follow_link(path.dentry, nd);
if (error)
goto exit_dput;
- error = __do_follow_link(dentry, nd);
- dput(dentry);
+ error = __do_follow_link(&path, nd);
if (error)
return error;
nd->flags &= ~LOOKUP_PARENT;
- if (nd->last_type == LAST_BIND) {
- dentry = nd->dentry;
+ if (nd->last_type == LAST_BIND)
goto ok;
- }
error = -EISDIR;
if (nd->last_type != LAST_NORM)
goto exit;
@@ -1546,7 +1564,8 @@
}
dir = nd->dentry;
down(&dir->d_inode->i_sem);
- dentry = __lookup_hash(&nd->last, nd->dentry, nd);
+ path.dentry = __lookup_hash(&nd->last, nd->dentry, nd);
+ path.mnt = nd->mnt;
putname(nd->last.name);
goto do_last;
}
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 73f96ac..ff6155f 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -528,19 +528,39 @@
dentry->d_time = jiffies;
}
+/*
+ * Return the intent data that applies to this particular path component
+ *
+ * Note that the current set of intents only apply to the very last
+ * component of the path.
+ * We check for this using LOOKUP_CONTINUE and LOOKUP_PARENT.
+ */
+static inline unsigned int nfs_lookup_check_intent(struct nameidata *nd, unsigned int mask)
+{
+ if (nd->flags & (LOOKUP_CONTINUE|LOOKUP_PARENT))
+ return 0;
+ return nd->flags & mask;
+}
+
+/*
+ * Inode and filehandle revalidation for lookups.
+ *
+ * We force revalidation in the cases where the VFS sets LOOKUP_REVAL,
+ * or if the intent information indicates that we're about to open this
+ * particular file and the "nocto" mount flag is not set.
+ *
+ */
static inline
int nfs_lookup_verify_inode(struct inode *inode, struct nameidata *nd)
{
struct nfs_server *server = NFS_SERVER(inode);
if (nd != NULL) {
- int ndflags = nd->flags;
/* VFS wants an on-the-wire revalidation */
- if (ndflags & LOOKUP_REVAL)
+ if (nd->flags & LOOKUP_REVAL)
goto out_force;
/* This is an open(2) */
- if ((ndflags & LOOKUP_OPEN) &&
- !(ndflags & LOOKUP_CONTINUE) &&
+ if (nfs_lookup_check_intent(nd, LOOKUP_OPEN) != 0 &&
!(server->flags & NFS_MOUNT_NOCTO))
goto out_force;
}
@@ -560,12 +580,8 @@
int nfs_neg_need_reval(struct inode *dir, struct dentry *dentry,
struct nameidata *nd)
{
- int ndflags = 0;
-
- if (nd)
- ndflags = nd->flags;
/* Don't revalidate a negative dentry if we're creating a new file */
- if ((ndflags & LOOKUP_CREATE) && !(ndflags & LOOKUP_CONTINUE))
+ if (nd != NULL && nfs_lookup_check_intent(nd, LOOKUP_CREATE) != 0)
return 0;
return !nfs_check_verifier(dir, dentry);
}
@@ -700,12 +716,16 @@
.d_iput = nfs_dentry_iput,
};
+/*
+ * Use intent information to check whether or not we're going to do
+ * an O_EXCL create using this path component.
+ */
static inline
int nfs_is_exclusive_create(struct inode *dir, struct nameidata *nd)
{
if (NFS_PROTO(dir)->version == 2)
return 0;
- if (!nd || (nd->flags & LOOKUP_CONTINUE) || !(nd->flags & LOOKUP_CREATE))
+ if (nd == NULL || nfs_lookup_check_intent(nd, LOOKUP_CREATE) == 0)
return 0;
return (nd->intent.open.flags & O_EXCL) != 0;
}
@@ -772,12 +792,13 @@
.d_iput = nfs_dentry_iput,
};
+/*
+ * Use intent information to determine whether we need to substitute
+ * the NFSv4-style stateful OPEN for the LOOKUP call
+ */
static int is_atomic_open(struct inode *dir, struct nameidata *nd)
{
- if (!nd)
- return 0;
- /* Check that we are indeed trying to open this file */
- if ((nd->flags & LOOKUP_CONTINUE) || !(nd->flags & LOOKUP_OPEN))
+ if (nd == NULL || nfs_lookup_check_intent(nd, LOOKUP_OPEN) == 0)
return 0;
/* NFS does not (yet) have a stateful open for directories */
if (nd->flags & LOOKUP_DIRECTORY)
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index f06eee6..55c9075 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -37,6 +37,7 @@
static int nfs_file_open(struct inode *, struct file *);
static int nfs_file_release(struct inode *, struct file *);
+static loff_t nfs_file_llseek(struct file *file, loff_t offset, int origin);
static int nfs_file_mmap(struct file *, struct vm_area_struct *);
static ssize_t nfs_file_sendfile(struct file *, loff_t *, size_t, read_actor_t, void *);
static ssize_t nfs_file_read(struct kiocb *, char __user *, size_t, loff_t);
@@ -48,7 +49,7 @@
static int nfs_flock(struct file *filp, int cmd, struct file_lock *fl);
struct file_operations nfs_file_operations = {
- .llseek = remote_llseek,
+ .llseek = nfs_file_llseek,
.read = do_sync_read,
.write = do_sync_write,
.aio_read = nfs_file_read,
@@ -114,6 +115,45 @@
return NFS_PROTO(inode)->file_release(inode, filp);
}
+/**
+ * nfs_revalidate_size - Revalidate the file size
+ * @inode - pointer to inode struct
+ * @file - pointer to struct file
+ *
+ * Revalidates the file length. This is basically a wrapper around
+ * nfs_revalidate_inode() that takes into account the fact that we may
+ * have cached writes (in which case we don't care about the server's
+ * idea of what the file length is), or O_DIRECT (in which case we
+ * shouldn't trust the cache).
+ */
+static int nfs_revalidate_file_size(struct inode *inode, struct file *filp)
+{
+ struct nfs_server *server = NFS_SERVER(inode);
+ struct nfs_inode *nfsi = NFS_I(inode);
+
+ if (server->flags & NFS_MOUNT_NOAC)
+ goto force_reval;
+ if (filp->f_flags & O_DIRECT)
+ goto force_reval;
+ if (nfsi->npages != 0)
+ return 0;
+ return nfs_revalidate_inode(server, inode);
+force_reval:
+ return __nfs_revalidate_inode(server, inode);
+}
+
+static loff_t nfs_file_llseek(struct file *filp, loff_t offset, int origin)
+{
+ /* origin == SEEK_END => we must revalidate the cached file length */
+ if (origin == 2) {
+ struct inode *inode = filp->f_mapping->host;
+ int retval = nfs_revalidate_file_size(inode, filp);
+ if (retval < 0)
+ return (loff_t)retval;
+ }
+ return remote_llseek(filp, offset, origin);
+}
+
/*
* Flush all dirty pages, and check for write errors.
*
diff --git a/include/asm-alpha/agp.h b/include/asm-alpha/agp.h
index c99dbbb..ef855a3 100644
--- a/include/asm-alpha/agp.h
+++ b/include/asm-alpha/agp.h
@@ -10,4 +10,14 @@
#define flush_agp_mappings()
#define flush_agp_cache() mb()
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order) \
+ ((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order) \
+ free_pages((unsigned long)(table), (order))
+
#endif
diff --git a/include/asm-arm/arch-integrator/platform.h b/include/asm-arm/arch-integrator/platform.h
index bd364f5..96ad3d2 100644
--- a/include/asm-arm/arch-integrator/platform.h
+++ b/include/asm-arm/arch-integrator/platform.h
@@ -293,7 +293,11 @@
#define INTEGRATOR_DBG_SWITCH (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET)
+#if defined(CONFIG_ARCH_INTEGRATOR_AP)
#define INTEGRATOR_GPIO_BASE 0x1B000000 /* GPIO */
+#elif defined(CONFIG_ARCH_INTEGRATOR_CP)
+#define INTEGRATOR_GPIO_BASE 0xC9000000 /* GPIO */
+#endif
/* ------------------------------------------------------------------------
* KMI keyboard/mouse definitions
diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h
index a8e3c2d..0834626 100644
--- a/include/asm-arm/arch-ixp2000/io.h
+++ b/include/asm-arm/arch-ixp2000/io.h
@@ -75,8 +75,8 @@
* Is this cycle meant for the CS8900?
*/
if ((machine_is_ixdp2401() || machine_is_ixdp2801()) &&
- ((port >= IXDP2X01_CS8900_VIRT_BASE) &&
- (port <= IXDP2X01_CS8900_VIRT_END))) {
+ (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) &&
+ ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) {
u8 *buf8 = (u8*)buf;
register u32 tmp32;
@@ -100,8 +100,8 @@
* Is this cycle meant for the CS8900?
*/
if ((machine_is_ixdp2401() || machine_is_ixdp2801()) &&
- ((port >= IXDP2X01_CS8900_VIRT_BASE) &&
- (port <= IXDP2X01_CS8900_VIRT_END))) {
+ (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) &&
+ ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) {
register u32 tmp32;
u8 *buf8 = (u8*)buf;
do {
@@ -124,8 +124,8 @@
* Is this cycle meant for the CS8900?
*/
if ((machine_is_ixdp2401() || machine_is_ixdp2801()) &&
- ((port >= IXDP2X01_CS8900_VIRT_BASE) &&
- (port <= IXDP2X01_CS8900_VIRT_END))) {
+ (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) &&
+ ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) {
return (u16)(*port);
}
@@ -137,8 +137,8 @@
register volatile u32 *port = (volatile u32 *)ptr;
if ((machine_is_ixdp2401() || machine_is_ixdp2801()) &&
- ((port >= IXDP2X01_CS8900_VIRT_BASE) &&
- (port <= IXDP2X01_CS8900_VIRT_END))) {
+ (((u32)port >= (u32)IXDP2X01_CS8900_VIRT_BASE) &&
+ ((u32)port <= (u32)IXDP2X01_CS8900_VIRT_END))) {
*port = value;
return;
}
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 39741d3..b5e54a9 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -1296,6 +1296,7 @@
#define GPIO111_MMCDAT3 111 /* MMC DAT3 (PXA27x) */
#define GPIO111_MMCCS1 111 /* MMC Chip Select 1 (PXA27x) */
#define GPIO112_MMCCMD 112 /* MMC CMD (PXA27x) */
+#define GPIO113_I2S_SYSCLK 113 /* I2S System Clock (PXA27x) */
#define GPIO113_AC97_RESET_N 113 /* AC97 NRESET on (PXA27x) */
/* GPIO alternate function mode & direction */
@@ -1428,6 +1429,7 @@
#define GPIO111_MMCDAT3_MD (111 | GPIO_ALT_FN_1_OUT)
#define GPIO110_MMCCS1_MD (111 | GPIO_ALT_FN_1_OUT)
#define GPIO112_MMCCMD_MD (112 | GPIO_ALT_FN_1_OUT)
+#define GPIO113_I2S_SYSCLK_MD (113 | GPIO_ALT_FN_1_OUT)
#define GPIO113_AC97_RESET_N_MD (113 | GPIO_ALT_FN_2_OUT)
#define GPIO117_I2CSCL_MD (117 | GPIO_ALT_FN_1_OUT)
#define GPIO118_I2CSDA_MD (118 | GPIO_ALT_FN_1_IN)
diff --git a/include/asm-arm/arch-versatile/platform.h b/include/asm-arm/arch-versatile/platform.h
index 2598d1f..a71093e 100644
--- a/include/asm-arm/arch-versatile/platform.h
+++ b/include/asm-arm/arch-versatile/platform.h
@@ -498,11 +498,17 @@
/*
* IB2 Versatile/AB expansion board definitions
*/
-#define VERSATILE_IB2_CAMERA_BANK 0x24000000
-#define VERSATILE_IB2_KBD_DATAREG 0x25000000
-#define VERSATILE_IB2_IER 0x26000000 /* for VICINTSOURCE27 */
-#define VERSATILE_IB2_CTRL 0x27000000
-#define VERSATILE_IB2_STAT 0x27000004
+#define VERSATILE_IB2_CAMERA_BANK VERSATILE_IB2_BASE
+#define VERSATILE_IB2_KBD_DATAREG (VERSATILE_IB2_BASE + 0x01000000)
+
+/* VICINTSOURCE27 */
+#define VERSATILE_IB2_INT_BASE (VERSATILE_IB2_BASE + 0x02000000)
+#define VERSATILE_IB2_IER (VERSATILE_IB2_INT_BASE + 0)
+#define VERSATILE_IB2_ISR (VERSATILE_IB2_INT_BASE + 4)
+
+#define VERSATILE_IB2_CTL_BASE (VERSATILE_IB2_BASE + 0x03000000)
+#define VERSATILE_IB2_CTRL (VERSATILE_IB2_CTL_BASE + 0)
+#define VERSATILE_IB2_STAT (VERSATILE_IB2_CTL_BASE + 4)
#endif
#endif
diff --git a/include/asm-arm/elf.h b/include/asm-arm/elf.h
index cbceacbe..a1696ba 100644
--- a/include/asm-arm/elf.h
+++ b/include/asm-arm/elf.h
@@ -38,9 +38,9 @@
*/
#define ELF_CLASS ELFCLASS32
#ifdef __ARMEB__
-#define ELF_DATA ELFDATA2MSB;
+#define ELF_DATA ELFDATA2MSB
#else
-#define ELF_DATA ELFDATA2LSB;
+#define ELF_DATA ELFDATA2LSB
#endif
#define ELF_ARCH EM_ARM
diff --git a/include/asm-arm26/elf.h b/include/asm-arm26/elf.h
index 8b14947..5a47fdb 100644
--- a/include/asm-arm26/elf.h
+++ b/include/asm-arm26/elf.h
@@ -36,7 +36,7 @@
* These are used to set parameters in the core dumps.
*/
#define ELF_CLASS ELFCLASS32
-#define ELF_DATA ELFDATA2LSB;
+#define ELF_DATA ELFDATA2LSB
#define ELF_ARCH EM_ARM
#define USE_ELF_CORE_DUMP
diff --git a/include/asm-arm26/signal.h b/include/asm-arm26/signal.h
index dedb292..37ad253 100644
--- a/include/asm-arm26/signal.h
+++ b/include/asm-arm26/signal.h
@@ -166,9 +166,6 @@
#include <asm/sigcontext.h>
#define sigmask(sig) (1UL << ((sig) - 1))
-//FIXME!!!
-//#define HAVE_ARCH_GET_SIGNAL_TO_DELIVER
-
#endif
diff --git a/include/asm-h8300/kmap_types.h b/include/asm-h8300/kmap_types.h
index 82431ed..1ec8a34 100644
--- a/include/asm-h8300/kmap_types.h
+++ b/include/asm-h8300/kmap_types.h
@@ -1,5 +1,5 @@
-#ifndef _ASM_KMAP_TYPES_H
-#define _ASM_KMAP_TYPES_H
+#ifndef _ASM_H8300_KMAP_TYPES_H
+#define _ASM_H8300_KMAP_TYPES_H
enum km_type {
KM_BOUNCE_READ,
@@ -13,6 +13,8 @@
KM_PTE1,
KM_IRQ0,
KM_IRQ1,
+ KM_SOFTIRQ0,
+ KM_SOFTIRQ1,
KM_TYPE_NR
};
diff --git a/include/asm-h8300/mman.h b/include/asm-h8300/mman.h
index abe0885..63f727a 100644
--- a/include/asm-h8300/mman.h
+++ b/include/asm-h8300/mman.h
@@ -4,6 +4,7 @@
#define PROT_READ 0x1 /* page can be read */
#define PROT_WRITE 0x2 /* page can be written */
#define PROT_EXEC 0x4 /* page can be executed */
+#define PROT_SEM 0x8 /* page may be used for atomic ops */
#define PROT_NONE 0x0 /* page can not be accessed */
#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */
#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */
@@ -19,6 +20,8 @@
#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */
#define MAP_LOCKED 0x2000 /* pages are locked */
#define MAP_NORESERVE 0x4000 /* don't check for reservations */
+#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
+#define MAP_NONBLOCK 0x10000 /* do not block on IO */
#define MS_ASYNC 1 /* sync memory asynchronously */
#define MS_INVALIDATE 2 /* invalidate the caches */
diff --git a/include/asm-i386/agp.h b/include/asm-i386/agp.h
index a917ff5..b82f5f3 100644
--- a/include/asm-i386/agp.h
+++ b/include/asm-i386/agp.h
@@ -21,4 +21,14 @@
worth it. Would need a page for it. */
#define flush_agp_cache() asm volatile("wbinvd":::"memory")
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order) \
+ ((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order) \
+ free_pages((unsigned long)(table), (order))
+
#endif
diff --git a/include/asm-i386/mach-numaq/mach_ipi.h b/include/asm-i386/mach-numaq/mach_ipi.h
index 1b46fd3..c604448 100644
--- a/include/asm-i386/mach-numaq/mach_ipi.h
+++ b/include/asm-i386/mach-numaq/mach_ipi.h
@@ -1,7 +1,7 @@
#ifndef __ASM_MACH_IPI_H
#define __ASM_MACH_IPI_H
-inline void send_IPI_mask_sequence(cpumask_t, int vector);
+void send_IPI_mask_sequence(cpumask_t, int vector);
static inline void send_IPI_mask(cpumask_t mask, int vector)
{
diff --git a/include/asm-ia64/agp.h b/include/asm-ia64/agp.h
index d1316f1..4e517f0 100644
--- a/include/asm-ia64/agp.h
+++ b/include/asm-ia64/agp.h
@@ -18,4 +18,14 @@
#define flush_agp_mappings() /* nothing */
#define flush_agp_cache() mb()
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order) \
+ ((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order) \
+ free_pages((unsigned long)(table), (order))
+
#endif /* _ASM_IA64_AGP_H */
diff --git a/include/asm-ia64/pgtable.h b/include/asm-ia64/pgtable.h
index ea121a0..fcc9c33 100644
--- a/include/asm-ia64/pgtable.h
+++ b/include/asm-ia64/pgtable.h
@@ -8,7 +8,7 @@
* This hopefully works with any (fixed) IA-64 page-size, as defined
* in <asm/page.h>.
*
- * Copyright (C) 1998-2004 Hewlett-Packard Co
+ * Copyright (C) 1998-2005 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
@@ -551,7 +551,11 @@
/* These tell get_user_pages() that the first gate page is accessible from user-level. */
#define FIXADDR_USER_START GATE_ADDR
-#define FIXADDR_USER_END (GATE_ADDR + 2*PERCPU_PAGE_SIZE)
+#ifdef HAVE_BUGGY_SEGREL
+# define FIXADDR_USER_END (GATE_ADDR + 2*PAGE_SIZE)
+#else
+# define FIXADDR_USER_END (GATE_ADDR + 2*PERCPU_PAGE_SIZE)
+#endif
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
diff --git a/include/asm-ia64/processor.h b/include/asm-ia64/processor.h
index 9e1ba8b..91bbd1f 100644
--- a/include/asm-ia64/processor.h
+++ b/include/asm-ia64/processor.h
@@ -403,7 +403,10 @@
* task_struct at this point.
*/
-/* Return TRUE if task T owns the fph partition of the CPU we're running on. */
+/*
+ * Return TRUE if task T owns the fph partition of the CPU we're running on.
+ * Must be called from code that has preemption disabled.
+ */
#define ia64_is_local_fpu_owner(t) \
({ \
struct task_struct *__ia64_islfo_task = (t); \
@@ -411,7 +414,10 @@
&& __ia64_islfo_task == (struct task_struct *) ia64_get_kr(IA64_KR_FPU_OWNER)); \
})
-/* Mark task T as owning the fph partition of the CPU we're running on. */
+/*
+ * Mark task T as owning the fph partition of the CPU we're running on.
+ * Must be called from code that has preemption disabled.
+ */
#define ia64_set_local_fpu_owner(t) do { \
struct task_struct *__ia64_slfo_task = (t); \
__ia64_slfo_task->thread.last_fph_cpu = smp_processor_id(); \
diff --git a/include/asm-ppc/agp.h b/include/asm-ppc/agp.h
index be27cfa..ca9e423 100644
--- a/include/asm-ppc/agp.h
+++ b/include/asm-ppc/agp.h
@@ -10,4 +10,14 @@
#define flush_agp_mappings()
#define flush_agp_cache() mb()
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order) \
+ ((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order) \
+ free_pages((unsigned long)(table), (order))
+
#endif
diff --git a/include/asm-ppc/sigcontext.h b/include/asm-ppc/sigcontext.h
index f82dccc..b7a417e 100644
--- a/include/asm-ppc/sigcontext.h
+++ b/include/asm-ppc/sigcontext.h
@@ -2,7 +2,7 @@
#define _ASM_PPC_SIGCONTEXT_H
#include <asm/ptrace.h>
-
+#include <linux/compiler.h>
struct sigcontext {
unsigned long _unused[4];
diff --git a/include/asm-ppc64/agp.h b/include/asm-ppc64/agp.h
index be27cfa..ca9e423 100644
--- a/include/asm-ppc64/agp.h
+++ b/include/asm-ppc64/agp.h
@@ -10,4 +10,14 @@
#define flush_agp_mappings()
#define flush_agp_cache() mb()
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order) \
+ ((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order) \
+ free_pages((unsigned long)(table), (order))
+
#endif
diff --git a/include/asm-ppc64/elf.h b/include/asm-ppc64/elf.h
index 6c42d61..085eedb 100644
--- a/include/asm-ppc64/elf.h
+++ b/include/asm-ppc64/elf.h
@@ -221,9 +221,7 @@
set_thread_flag(TIF_ABI_PENDING); \
else \
clear_thread_flag(TIF_ABI_PENDING); \
- if (ibcs2) \
- set_personality(PER_SVR4); \
- else if (current->personality != PER_LINUX32) \
+ if (personality(current->personality) != PER_LINUX32) \
set_personality(PER_LINUX); \
} while (0)
diff --git a/include/asm-ppc64/processor.h b/include/asm-ppc64/processor.h
index 0035efe..809c634b 100644
--- a/include/asm-ppc64/processor.h
+++ b/include/asm-ppc64/processor.h
@@ -120,103 +120,18 @@
/* Special Purpose Registers (SPRNs)*/
-#define SPRN_CDBCR 0x3D7 /* Cache Debug Control Register */
#define SPRN_CTR 0x009 /* Count Register */
#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
-#define SPRN_DAC1 0x3F6 /* Data Address Compare 1 */
-#define SPRN_DAC2 0x3F7 /* Data Address Compare 2 */
+#define DABR_TRANSLATION (1UL << 2)
#define SPRN_DAR 0x013 /* Data Address Register */
-#define SPRN_DBCR 0x3F2 /* Debug Control Regsiter */
-#define DBCR_EDM 0x80000000
-#define DBCR_IDM 0x40000000
-#define DBCR_RST(x) (((x) & 0x3) << 28)
-#define DBCR_RST_NONE 0
-#define DBCR_RST_CORE 1
-#define DBCR_RST_CHIP 2
-#define DBCR_RST_SYSTEM 3
-#define DBCR_IC 0x08000000 /* Instruction Completion Debug Evnt */
-#define DBCR_BT 0x04000000 /* Branch Taken Debug Event */
-#define DBCR_EDE 0x02000000 /* Exception Debug Event */
-#define DBCR_TDE 0x01000000 /* TRAP Debug Event */
-#define DBCR_FER 0x00F80000 /* First Events Remaining Mask */
-#define DBCR_FT 0x00040000 /* Freeze Timers on Debug Event */
-#define DBCR_IA1 0x00020000 /* Instr. Addr. Compare 1 Enable */
-#define DBCR_IA2 0x00010000 /* Instr. Addr. Compare 2 Enable */
-#define DBCR_D1R 0x00008000 /* Data Addr. Compare 1 Read Enable */
-#define DBCR_D1W 0x00004000 /* Data Addr. Compare 1 Write Enable */
-#define DBCR_D1S(x) (((x) & 0x3) << 12) /* Data Adrr. Compare 1 Size */
-#define DAC_BYTE 0
-#define DAC_HALF 1
-#define DAC_WORD 2
-#define DAC_QUAD 3
-#define DBCR_D2R 0x00000800 /* Data Addr. Compare 2 Read Enable */
-#define DBCR_D2W 0x00000400 /* Data Addr. Compare 2 Write Enable */
-#define DBCR_D2S(x) (((x) & 0x3) << 8) /* Data Addr. Compare 2 Size */
-#define DBCR_SBT 0x00000040 /* Second Branch Taken Debug Event */
-#define DBCR_SED 0x00000020 /* Second Exception Debug Event */
-#define DBCR_STD 0x00000010 /* Second Trap Debug Event */
-#define DBCR_SIA 0x00000008 /* Second IAC Enable */
-#define DBCR_SDA 0x00000004 /* Second DAC Enable */
-#define DBCR_JOI 0x00000002 /* JTAG Serial Outbound Int. Enable */
-#define DBCR_JII 0x00000001 /* JTAG Serial Inbound Int. Enable */
-#define SPRN_DBCR0 0x3F2 /* Debug Control Register 0 */
-#define SPRN_DBCR1 0x3BD /* Debug Control Register 1 */
-#define SPRN_DBSR 0x3F0 /* Debug Status Register */
-#define SPRN_DCCR 0x3FA /* Data Cache Cacheability Register */
-#define DCCR_NOCACHE 0 /* Noncacheable */
-#define DCCR_CACHE 1 /* Cacheable */
-#define SPRN_DCMP 0x3D1 /* Data TLB Compare Register */
-#define SPRN_DCWR 0x3BA /* Data Cache Write-thru Register */
-#define DCWR_COPY 0 /* Copy-back */
-#define DCWR_WRITE 1 /* Write-through */
-#define SPRN_DEAR 0x3D5 /* Data Error Address Register */
#define SPRN_DEC 0x016 /* Decrement Register */
-#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
#define DSISR_NOHPTE 0x40000000 /* no translation found */
#define DSISR_PROTFAULT 0x08000000 /* protection fault */
#define DSISR_ISSTORE 0x02000000 /* access was a store */
#define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */
#define DSISR_NOSEGMENT 0x00200000 /* STAB/SLB miss */
-#define SPRN_EAR 0x11A /* External Address Register */
-#define SPRN_ESR 0x3D4 /* Exception Syndrome Register */
-#define ESR_IMCP 0x80000000 /* Instr. Machine Check - Protection */
-#define ESR_IMCN 0x40000000 /* Instr. Machine Check - Non-config */
-#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
-#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
-#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
-#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
-#define ESR_PTR 0x02000000 /* Program Exception - Trap */
-#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
-#define ESR_DIZ 0x00400000 /* Storage Exception - Zone fault */
-#define SPRN_EVPR 0x3D6 /* Exception Vector Prefix Register */
-#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
-#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Resgister */
#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
-#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
-#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
-#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
-#define HID0_SBCLK (1<<27)
-#define HID0_EICE (1<<26)
-#define HID0_ECLK (1<<25)
-#define HID0_PAR (1<<24)
-#define HID0_DOZE (1<<23)
-#define HID0_NAP (1<<22)
-#define HID0_SLEEP (1<<21)
-#define HID0_DPM (1<<20)
-#define HID0_ICE (1<<15) /* Instruction Cache Enable */
-#define HID0_DCE (1<<14) /* Data Cache Enable */
-#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
-#define HID0_DLOCK (1<<12) /* Data Cache Lock */
-#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
-#define HID0_DCI (1<<10) /* Data Cache Invalidate */
-#define HID0_SPD (1<<9) /* Speculative disable */
-#define HID0_SGE (1<<7) /* Store Gathering Enable */
-#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
-#define HID0_BTIC (1<<5) /* Branch Target Instruction Cache Enable */
-#define HID0_ABE (1<<3) /* Address Broadcast Enable */
-#define HID0_BHTE (1<<2) /* Branch History Table Enable */
-#define HID0_BTCD (1<<1) /* Branch target cache disable */
#define SPRN_MSRDORM 0x3F1 /* Hardware Implementation Register 1 */
#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
@@ -225,23 +140,8 @@
#define SPRN_HID5 0x3F6 /* 970 HID5 */
#define SPRN_TSC 0x3FD /* Thread switch control */
#define SPRN_TST 0x3FC /* Thread switch timeout */
-#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
-#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
-#define SPRN_ICCR 0x3FB /* Instruction Cache Cacheability Register */
-#define ICCR_NOCACHE 0 /* Noncacheable */
-#define ICCR_CACHE 1 /* Cacheable */
-#define SPRN_ICDBDR 0x3D3 /* Instruction Cache Debug Data Register */
-#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
-#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
-#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
-#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Regsiter */
#define SPRN_LR 0x008 /* Link Register */
-#define SPRN_PBL1 0x3FC /* Protection Bound Lower 1 */
-#define SPRN_PBL2 0x3FE /* Protection Bound Lower 2 */
-#define SPRN_PBU1 0x3FD /* Protection Bound Upper 1 */
-#define SPRN_PBU2 0x3FF /* Protection Bound Upper 2 */
-#define SPRN_PID 0x3B1 /* Process ID */
#define SPRN_PIR 0x3FF /* Processor Identification Register */
#define SPRN_PIT 0x3DB /* Programmable Interval Timer */
#define SPRN_PURR 0x135 /* Processor Utilization of Resources Register */
@@ -249,9 +149,6 @@
#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
-#define SPRN_SGR 0x3B9 /* Storage Guarded Register */
-#define SGR_NORMAL 0
-#define SGR_GUARDED 1
#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
@@ -264,50 +161,12 @@
#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, W/O) */
#define SPRN_TBWU 0x11D /* Time Base Write Upper Register (super, W/O) */
#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */
-#define SPRN_TCR 0x3DA /* Timer Control Register */
-#define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */
-#define WP_2_17 0 /* 2^17 clocks */
-#define WP_2_21 1 /* 2^21 clocks */
-#define WP_2_25 2 /* 2^25 clocks */
-#define WP_2_29 3 /* 2^29 clocks */
-#define TCR_WRC(x) (((x)&0x3)<<28) /* WDT Reset Control */
-#define WRC_NONE 0 /* No reset will occur */
-#define WRC_CORE 1 /* Core reset will occur */
-#define WRC_CHIP 2 /* Chip reset will occur */
-#define WRC_SYSTEM 3 /* System reset will occur */
-#define TCR_WIE 0x08000000 /* WDT Interrupt Enable */
-#define TCR_PIE 0x04000000 /* PIT Interrupt Enable */
-#define TCR_FP(x) (((x)&0x3)<<24) /* FIT Period */
-#define FP_2_9 0 /* 2^9 clocks */
-#define FP_2_13 1 /* 2^13 clocks */
-#define FP_2_17 2 /* 2^17 clocks */
-#define FP_2_21 3 /* 2^21 clocks */
-#define TCR_FIE 0x00800000 /* FIT Interrupt Enable */
-#define TCR_ARE 0x00400000 /* Auto Reload Enable */
-#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */
-#define THRM1_TIN (1<<0)
-#define THRM1_TIV (1<<1)
-#define THRM1_THRES (0x7f<<2)
-#define THRM1_TID (1<<29)
-#define THRM1_TIE (1<<30)
-#define THRM1_V (1<<31)
-#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */
-#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
-#define THRM3_E (1<<31)
-#define SPRN_TSR 0x3D8 /* Timer Status Register */
-#define TSR_ENW 0x80000000 /* Enable Next Watchdog */
-#define TSR_WIS 0x40000000 /* WDT Interrupt Status */
-#define TSR_WRS(x) (((x)&0x3)<<28) /* WDT Reset Status */
-#define WRS_NONE 0 /* No WDT reset occurred */
-#define WRS_CORE 1 /* WDT forced core reset */
-#define WRS_CHIP 2 /* WDT forced chip reset */
-#define WRS_SYSTEM 3 /* WDT forced system reset */
-#define TSR_PIS 0x08000000 /* PIT Interrupt Status */
-#define TSR_FIS 0x04000000 /* FIT Interrupt Status */
#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
#define SPRN_XER 0x001 /* Fixed Point Exception Register */
-#define SPRN_ZPR 0x3B0 /* Zone Protection Register */
#define SPRN_VRSAVE 0x100 /* Vector save */
+#define SPRN_CTRLF 0x088
+#define SPRN_CTRLT 0x098
+#define CTRL_RUNLATCH 0x1
/* Performance monitor SPRs */
#define SPRN_SIAR 780
@@ -352,28 +211,19 @@
#define CTR SPRN_CTR /* Counter Register */
#define DAR SPRN_DAR /* Data Address Register */
#define DABR SPRN_DABR /* Data Address Breakpoint Register */
-#define DCMP SPRN_DCMP /* Data TLB Compare Register */
#define DEC SPRN_DEC /* Decrement Register */
-#define DMISS SPRN_DMISS /* Data TLB Miss Register */
#define DSISR SPRN_DSISR /* Data Storage Interrupt Status Register */
-#define EAR SPRN_EAR /* External Address Register */
-#define HASH1 SPRN_HASH1 /* Primary Hash Address Register */
-#define HASH2 SPRN_HASH2 /* Secondary Hash Address Register */
#define HID0 SPRN_HID0 /* Hardware Implementation Register 0 */
#define MSRDORM SPRN_MSRDORM /* MSR Dormant Register */
#define NIADORM SPRN_NIADORM /* NIA Dormant Register */
#define TSC SPRN_TSC /* Thread switch control */
#define TST SPRN_TST /* Thread switch timeout */
#define IABR SPRN_IABR /* Instruction Address Breakpoint Register */
-#define ICMP SPRN_ICMP /* Instruction TLB Compare Register */
-#define IMISS SPRN_IMISS /* Instruction TLB Miss Register */
-#define IMMR SPRN_IMMR /* PPC 860/821 Internal Memory Map Register */
#define L2CR SPRN_L2CR /* PPC 750 L2 control register */
#define __LR SPRN_LR
#define PVR SPRN_PVR /* Processor Version */
#define PIR SPRN_PIR /* Processor ID */
#define PURR SPRN_PURR /* Processor Utilization of Resource Register */
-//#define RPA SPRN_RPA /* Required Physical Address Register */
#define SDR1 SPRN_SDR1 /* MMU hash base register */
#define SPR0 SPRN_SPRG0 /* Supervisor Private Registers */
#define SPR1 SPRN_SPRG1
@@ -389,10 +239,6 @@
#define TBRU SPRN_TBRU /* Time Base Read Upper Register */
#define TBWL SPRN_TBWL /* Time Base Write Lower Register */
#define TBWU SPRN_TBWU /* Time Base Write Upper Register */
-#define ICTC 1019
-#define THRM1 SPRN_THRM1 /* Thermal Management Register 1 */
-#define THRM2 SPRN_THRM2 /* Thermal Management Register 2 */
-#define THRM3 SPRN_THRM3 /* Thermal Management Register 3 */
#define XER SPRN_XER
/* Processor Version Register (PVR) field extraction */
@@ -436,12 +282,6 @@
#define XGLUE(a,b) a##b
#define GLUE(a,b) XGLUE(a,b)
-/* iSeries CTRL register (for runlatch) */
-
-#define CTRLT 0x098
-#define CTRLF 0x088
-#define RUNLATCH 0x0001
-
#ifdef __ASSEMBLY__
#define _GLOBAL(name) \
@@ -656,6 +496,24 @@
#define HAVE_ARCH_PICK_MMAP_LAYOUT
+static inline void ppc64_runlatch_on(void)
+{
+ unsigned long ctrl;
+
+ ctrl = mfspr(SPRN_CTRLF);
+ ctrl |= CTRL_RUNLATCH;
+ mtspr(SPRN_CTRLT, ctrl);
+}
+
+static inline void ppc64_runlatch_off(void)
+{
+ unsigned long ctrl;
+
+ ctrl = mfspr(SPRN_CTRLF);
+ ctrl &= ~CTRL_RUNLATCH;
+ mtspr(SPRN_CTRLT, ctrl);
+}
+
#endif /* __KERNEL__ */
#endif /* __ASSEMBLY__ */
diff --git a/include/asm-ppc64/thread_info.h b/include/asm-ppc64/thread_info.h
index 037b5e0..48b7900 100644
--- a/include/asm-ppc64/thread_info.h
+++ b/include/asm-ppc64/thread_info.h
@@ -96,7 +96,7 @@
#define TIF_POLLING_NRFLAG 4 /* true if poll_idle() is polling
TIF_NEED_RESCHED */
#define TIF_32BIT 5 /* 32 bit binary */
-#define TIF_RUN_LIGHT 6 /* iSeries run light */
+/* #define SPARE 6 */
#define TIF_ABI_PENDING 7 /* 32/64 bit switch needed */
#define TIF_SYSCALL_AUDIT 8 /* syscall auditing active */
#define TIF_SINGLESTEP 9 /* singlestepping active */
@@ -110,7 +110,7 @@
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_32BIT (1<<TIF_32BIT)
-#define _TIF_RUN_LIGHT (1<<TIF_RUN_LIGHT)
+/* #define _SPARE (1<<SPARE) */
#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
#define _TIF_SINGLESTEP (1<<TIF_SINGLESTEP)
diff --git a/include/asm-s390/user.h b/include/asm-s390/user.h
index c64f8c1..1dc74ba 100644
--- a/include/asm-s390/user.h
+++ b/include/asm-s390/user.h
@@ -10,7 +10,7 @@
#define _S390_USER_H
#include <asm/page.h>
-#include <linux/ptrace.h>
+#include <asm/ptrace.h>
/* Core file format: The core file is written in such a way that gdb
can understand it and provide useful information to the user (under
linux we use the 'trad-core' bfd). There are quite a number of
diff --git a/include/asm-sparc/uaccess.h b/include/asm-sparc/uaccess.h
index f461144..0a780e8 100644
--- a/include/asm-sparc/uaccess.h
+++ b/include/asm-sparc/uaccess.h
@@ -41,10 +41,11 @@
* No one can read/write anything from userland in the kernel space by setting
* large size and address near to PAGE_OFFSET - a fault will break his intentions.
*/
-#define __user_ok(addr,size) ((addr) < STACK_TOP)
+#define __user_ok(addr, size) ({ (void)(size); (addr) < STACK_TOP; })
#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
#define __access_ok(addr,size) (__user_ok((addr) & get_fs().seg,(size)))
-#define access_ok(type,addr,size) __access_ok((unsigned long)(addr),(size))
+#define access_ok(type, addr, size) \
+ ({ (void)(type); __access_ok((unsigned long)(addr), size); })
/* this function will go away soon - use access_ok() instead */
static inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size)
diff --git a/include/asm-sparc64/agp.h b/include/asm-sparc64/agp.h
index ba05bdf..58f8cb6 100644
--- a/include/asm-sparc64/agp.h
+++ b/include/asm-sparc64/agp.h
@@ -8,4 +8,14 @@
#define flush_agp_mappings()
#define flush_agp_cache() mb()
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order) \
+ ((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order) \
+ free_pages((unsigned long)(table), (order))
+
#endif
diff --git a/include/asm-x86_64/agp.h b/include/asm-x86_64/agp.h
index 0bb9019..06c52ee 100644
--- a/include/asm-x86_64/agp.h
+++ b/include/asm-x86_64/agp.h
@@ -19,4 +19,14 @@
worth it. Would need a page for it. */
#define flush_agp_cache() asm volatile("wbinvd":::"memory")
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order) \
+ ((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order) \
+ free_pages((unsigned long)(table), (order))
+
#endif
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index d5a55bd..b123cc0 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -25,6 +25,8 @@
#ifndef _LINUX_ACPI_H
#define _LINUX_ACPI_H
+#include <linux/config.h>
+
#ifdef CONFIG_ACPI
#ifndef _LINUX
diff --git a/include/linux/if_shaper.h b/include/linux/if_shaper.h
index 0485b25..004e6f0 100644
--- a/include/linux/if_shaper.h
+++ b/include/linux/if_shaper.h
@@ -23,7 +23,7 @@
__u32 shapeclock;
unsigned long recovery; /* Time we can next clock a packet out on
an empty queue */
- unsigned long locked;
+ struct semaphore sem;
struct net_device_stats stats;
struct net_device *dev;
int (*hard_start_xmit) (struct sk_buff *skb,
@@ -38,7 +38,6 @@
int (*hard_header_cache)(struct neighbour *neigh, struct hh_cache *hh);
void (*header_cache_update)(struct hh_cache *hh, struct net_device *dev, unsigned char * haddr);
struct net_device_stats* (*get_stats)(struct net_device *dev);
- wait_queue_head_t wait_queue;
struct timer_list timer;
};
diff --git a/include/linux/if_tr.h b/include/linux/if_tr.h
index 6688b41..3fba9e2 100644
--- a/include/linux/if_tr.h
+++ b/include/linux/if_tr.h
@@ -19,6 +19,8 @@
#ifndef _LINUX_IF_TR_H
#define _LINUX_IF_TR_H
+#include <asm/byteorder.h> /* For __be16 */
+
/* IEEE 802.5 Token-Ring magic constants. The frame sizes omit the preamble
and FCS/CRC (frame check sequence). */
#define TR_ALEN 6 /* Octets in one token-ring addr */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index e74f301..b009f80 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -467,12 +467,34 @@
return ap->ops->check_status(ap);
}
+
+/**
+ * ata_pause - Flush writes and pause 400 nanoseconds.
+ * @ap: Port to wait for.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
static inline void ata_pause(struct ata_port *ap)
{
ata_altstatus(ap);
ndelay(400);
}
+
+/**
+ * ata_busy_wait - Wait for a port status register
+ * @ap: Port to wait for.
+ *
+ * Waits up to max*10 microseconds for the selected bits in the port's
+ * status register to be cleared.
+ * Returns final value of status register.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
static inline u8 ata_busy_wait(struct ata_port *ap, unsigned int bits,
unsigned int max)
{
@@ -487,6 +509,18 @@
return status;
}
+
+/**
+ * ata_wait_idle - Wait for a port to be idle.
+ * @ap: Port to wait for.
+ *
+ * Waits up to 10ms for port's BUSY and DRQ signals to clear.
+ * Returns final value of status register.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
static inline u8 ata_wait_idle(struct ata_port *ap)
{
u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
@@ -525,6 +559,18 @@
tf->device = ATA_DEVICE_OBS | ATA_DEV1;
}
+
+/**
+ * ata_irq_on - Enable interrupts on a port.
+ * @ap: Port on which interrupts are enabled.
+ *
+ * Enable interrupts on a legacy IDE device using MMIO or PIO,
+ * wait for idle, clear any pending interrupts.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
static inline u8 ata_irq_on(struct ata_port *ap)
{
struct ata_ioports *ioaddr = &ap->ioaddr;
@@ -544,6 +590,18 @@
return tmp;
}
+
+/**
+ * ata_irq_ack - Acknowledge a device interrupt.
+ * @ap: Port on which interrupts are enabled.
+ *
+ * Wait up to 10 ms for legacy IDE device to become idle (BUSY
+ * or BUSY+DRQ clear). Obtain dma status and port status from
+ * device. Clear the interrupt. Return port status.
+ *
+ * LOCKING:
+ */
+
static inline u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq)
{
unsigned int bits = chk_drq ? ATA_BUSY | ATA_DRQ : ATA_BUSY;
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 470af8c..ba5d123 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -204,7 +204,7 @@
/* cached hardware header; allow for machine alignment needs. */
#define HH_DATA_MOD 16
#define HH_DATA_OFF(__len) \
- (HH_DATA_MOD - ((__len) & (HH_DATA_MOD - 1)))
+ (HH_DATA_MOD - (((__len - 1) & (HH_DATA_MOD - 1)) + 1))
#define HH_DATA_ALIGN(__len) \
(((__len)+(HH_DATA_MOD-1))&~(HH_DATA_MOD - 1))
unsigned long hh_data[HH_DATA_ALIGN(LL_MAX_HEADER) / sizeof(long)];
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index b0d6134..b8b4ebf 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -874,6 +874,7 @@
#define PCI_DEVICE_ID_APPLE_KL_USB_P 0x0026
#define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P 0x0027
#define PCI_DEVICE_ID_APPLE_UNI_N_AGP15 0x002d
+#define PCI_DEVICE_ID_APPLE_UNI_N_PCI15 0x002e
#define PCI_DEVICE_ID_APPLE_UNI_N_FW2 0x0030
#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2 0x0032
#define PCI_DEVIEC_ID_APPLE_UNI_N_ATA 0x0033
@@ -2382,6 +2383,8 @@
#define PCI_DEVICE_ID_INTEL_82915G_IG 0x2582
#define PCI_DEVICE_ID_INTEL_82915GM_HB 0x2590
#define PCI_DEVICE_ID_INTEL_82915GM_IG 0x2592
+#define PCI_DEVICE_ID_INTEL_82945G_HB 0x2770
+#define PCI_DEVICE_ID_INTEL_82945G_IG 0x2772
#define PCI_DEVICE_ID_INTEL_ICH6_0 0x2640
#define PCI_DEVICE_ID_INTEL_ICH6_1 0x2641
#define PCI_DEVICE_ID_INTEL_ICH6_2 0x2642
diff --git a/include/linux/signal.h b/include/linux/signal.h
index 0a98f5e..7be18b5 100644
--- a/include/linux/signal.h
+++ b/include/linux/signal.h
@@ -231,10 +231,8 @@
extern long do_sigpending(void __user *, unsigned long);
extern int sigprocmask(int, sigset_t *, sigset_t *);
-#ifndef HAVE_ARCH_GET_SIGNAL_TO_DELIVER
struct pt_regs;
extern int get_signal_to_deliver(siginfo_t *info, struct k_sigaction *return_ka, struct pt_regs *regs, void *cookie);
-#endif
#endif /* __KERNEL__ */
diff --git a/include/linux/sysctl.h b/include/linux/sysctl.h
index 23032d9..a17745c 100644
--- a/include/linux/sysctl.h
+++ b/include/linux/sysctl.h
@@ -346,6 +346,7 @@
NET_TCP_MODERATE_RCVBUF=106,
NET_TCP_TSO_WIN_DIVISOR=107,
NET_TCP_BIC_BETA=108,
+ NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR=109,
};
enum {
diff --git a/include/linux/tc_ematch/tc_em_meta.h b/include/linux/tc_ematch/tc_em_meta.h
index aa6b48bb..a6b2cc5 100644
--- a/include/linux/tc_ematch/tc_em_meta.h
+++ b/include/linux/tc_ematch/tc_em_meta.h
@@ -56,6 +56,36 @@
TCF_META_ID_TCCLASSID,
TCF_META_ID_RTCLASSID,
TCF_META_ID_RTIIF,
+ TCF_META_ID_SK_FAMILY,
+ TCF_META_ID_SK_STATE,
+ TCF_META_ID_SK_REUSE,
+ TCF_META_ID_SK_BOUND_IF,
+ TCF_META_ID_SK_REFCNT,
+ TCF_META_ID_SK_SHUTDOWN,
+ TCF_META_ID_SK_PROTO,
+ TCF_META_ID_SK_TYPE,
+ TCF_META_ID_SK_RCVBUF,
+ TCF_META_ID_SK_RMEM_ALLOC,
+ TCF_META_ID_SK_WMEM_ALLOC,
+ TCF_META_ID_SK_OMEM_ALLOC,
+ TCF_META_ID_SK_WMEM_QUEUED,
+ TCF_META_ID_SK_RCV_QLEN,
+ TCF_META_ID_SK_SND_QLEN,
+ TCF_META_ID_SK_ERR_QLEN,
+ TCF_META_ID_SK_FORWARD_ALLOCS,
+ TCF_META_ID_SK_SNDBUF,
+ TCF_META_ID_SK_ALLOCS,
+ TCF_META_ID_SK_ROUTE_CAPS,
+ TCF_META_ID_SK_HASHENT,
+ TCF_META_ID_SK_LINGERTIME,
+ TCF_META_ID_SK_ACK_BACKLOG,
+ TCF_META_ID_SK_MAX_ACK_BACKLOG,
+ TCF_META_ID_SK_PRIO,
+ TCF_META_ID_SK_RCVLOWAT,
+ TCF_META_ID_SK_RCVTIMEO,
+ TCF_META_ID_SK_SNDTIMEO,
+ TCF_META_ID_SK_SENDMSG_OFF,
+ TCF_META_ID_SK_WRITE_PENDING,
__TCF_META_ID_MAX
};
#define TCF_META_ID_MAX (__TCF_META_ID_MAX - 1)
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 41d1a64..2d1ac50 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -796,6 +796,10 @@
* of the iso_frame_desc array, and the number of errors is reported in
* error_count. Completion callbacks for ISO transfers will normally
* (re)submit URBs to ensure a constant transfer rate.
+ *
+ * Note that even fields marked "public" should not be touched by the driver
+ * when the urb is owned by the hcd, that is, since the call to
+ * usb_submit_urb() till the entry into the completion routine.
*/
struct urb
{
@@ -803,12 +807,12 @@
struct kref kref; /* reference count of the URB */
spinlock_t lock; /* lock for the URB */
void *hcpriv; /* private data for host controller */
- struct list_head urb_list; /* list pointer to all active urbs */
int bandwidth; /* bandwidth for INT/ISO request */
atomic_t use_count; /* concurrent submissions counter */
u8 reject; /* submissions will fail */
/* public, documented fields in the urb that can be used by drivers */
+ struct list_head urb_list; /* list head for use by the urb owner */
struct usb_device *dev; /* (in) pointer to associated device */
unsigned int pipe; /* (in) pipe information */
int status; /* (return) non-ISO status */
diff --git a/include/net/ip.h b/include/net/ip.h
index 3f63992..32360bb 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -163,6 +163,7 @@
extern int sysctl_local_port_range[2];
extern int sysctl_ip_default_ttl;
+extern int sysctl_ip_nonlocal_bind;
#ifdef CONFIG_INET
/* The function in 2.2 was invalid, producing wrong result for
diff --git a/kernel/exit.c b/kernel/exit.c
index edaa50b..2ef2ad5 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -811,10 +811,8 @@
acct_update_integrals(tsk);
update_mem_hiwater(tsk);
group_dead = atomic_dec_and_test(&tsk->signal->live);
- if (group_dead) {
- del_timer_sync(&tsk->signal->real_timer);
+ if (group_dead)
acct_process(code);
- }
exit_mm(tsk);
exit_sem(tsk);
diff --git a/kernel/posix-timers.c b/kernel/posix-timers.c
index fd316c2..cabb63f 100644
--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -1197,6 +1197,7 @@
tmr = list_entry(sig->posix_timers.next, struct k_itimer, list);
itimer_delete(tmr);
}
+ del_timer_sync(&sig->real_timer);
}
/*
diff --git a/kernel/sched.c b/kernel/sched.c
index 66b2ed7..f12a0c8 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -3755,19 +3755,22 @@
*/
int cond_resched_lock(spinlock_t * lock)
{
+ int ret = 0;
+
if (need_lockbreak(lock)) {
spin_unlock(lock);
cpu_relax();
+ ret = 1;
spin_lock(lock);
}
if (need_resched()) {
_raw_spin_unlock(lock);
preempt_enable_no_resched();
__cond_resched();
+ ret = 1;
spin_lock(lock);
- return 1;
}
- return 0;
+ return ret;
}
EXPORT_SYMBOL(cond_resched_lock);
diff --git a/mm/filemap.c b/mm/filemap.c
index 1d33fec..4a2fee2 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1968,6 +1968,7 @@
do {
unsigned long index;
unsigned long offset;
+ unsigned long maxlen;
size_t copied;
offset = (pos & (PAGE_CACHE_SIZE -1)); /* Within page */
@@ -1982,7 +1983,10 @@
* same page as we're writing to, without it being marked
* up-to-date.
*/
- fault_in_pages_readable(buf, bytes);
+ maxlen = cur_iov->iov_len - iov_base;
+ if (maxlen > bytes)
+ maxlen = bytes;
+ fault_in_pages_readable(buf, maxlen);
page = __grab_cache_page(mapping,index,&cached_page,&lru_pvec);
if (!page) {
@@ -2024,6 +2028,8 @@
filemap_set_next_iovec(&cur_iov,
&iov_base, status);
buf = cur_iov->iov_base + iov_base;
+ } else {
+ iov_base += status;
}
}
}
diff --git a/net/core/dev.c b/net/core/dev.c
index f15a3ff..ab93577 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1744,6 +1744,7 @@
struct softnet_data *queue = &__get_cpu_var(softnet_data);
unsigned long start_time = jiffies;
+ backlog_dev->weight = weight_p;
for (;;) {
struct sk_buff *skb;
struct net_device *dev;
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 8ec4848..a3eeb88 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -356,7 +356,7 @@
{
struct ethtool_coalesce coalesce;
- if (!dev->ethtool_ops->get_coalesce)
+ if (!dev->ethtool_ops->set_coalesce)
return -EOPNOTSUPP;
if (copy_from_user(&coalesce, useraddr, sizeof(coalesce)))
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 910eb4c..e2137f3 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -185,6 +185,22 @@
static CLASS_DEVICE_ATTR(tx_queue_len, S_IRUGO | S_IWUSR, show_tx_queue_len,
store_tx_queue_len);
+NETDEVICE_SHOW(weight, fmt_dec);
+
+static int change_weight(struct net_device *net, unsigned long new_weight)
+{
+ net->weight = new_weight;
+ return 0;
+}
+
+static ssize_t store_weight(struct class_device *dev, const char *buf, size_t len)
+{
+ return netdev_store(dev, buf, len, change_weight);
+}
+
+static CLASS_DEVICE_ATTR(weight, S_IRUGO | S_IWUSR, show_weight,
+ store_weight);
+
static struct class_device_attribute *net_class_attributes[] = {
&class_device_attr_ifindex,
@@ -194,6 +210,7 @@
&class_device_attr_features,
&class_device_attr_mtu,
&class_device_attr_flags,
+ &class_device_attr_weight,
&class_device_attr_type,
&class_device_attr_address,
&class_device_attr_broadcast,
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index b3cb49c..03942f1 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -1181,6 +1181,7 @@
EXPORT_SYMBOL(inet_stream_ops);
EXPORT_SYMBOL(inet_unregister_protosw);
EXPORT_SYMBOL(net_statistics);
+EXPORT_SYMBOL(sysctl_ip_nonlocal_bind);
#ifdef INET_REFCNT_DEBUG
EXPORT_SYMBOL(inet_sock_nr);
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 85bf0d3..cb75948 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -207,6 +207,7 @@
int sysctl_icmp_ratelimit = 1 * HZ;
int sysctl_icmp_ratemask = 0x1818;
+int sysctl_icmp_errors_use_inbound_ifaddr;
/*
* ICMP control array. This specifies what to do with each ICMP.
@@ -511,8 +512,12 @@
*/
saddr = iph->daddr;
- if (!(rt->rt_flags & RTCF_LOCAL))
- saddr = 0;
+ if (!(rt->rt_flags & RTCF_LOCAL)) {
+ if (sysctl_icmp_errors_use_inbound_ifaddr)
+ saddr = inet_select_addr(skb_in->dev, 0, RT_SCOPE_LINK);
+ else
+ saddr = 0;
+ }
tos = icmp_pointers[type].error ? ((iph->tos & IPTOS_TOS_MASK) |
IPTOS_PREC_INTERNETCONTROL) :
diff --git a/net/ipv4/ipvs/Makefile b/net/ipv4/ipvs/Makefile
index a788461..30e85de 100644
--- a/net/ipv4/ipvs/Makefile
+++ b/net/ipv4/ipvs/Makefile
@@ -11,7 +11,7 @@
ip_vs-objs := ip_vs_conn.o ip_vs_core.o ip_vs_ctl.o ip_vs_sched.o \
ip_vs_xmit.o ip_vs_app.o ip_vs_sync.o \
- ip_vs_est.o ip_vs_proto.o ip_vs_proto_icmp.o \
+ ip_vs_est.o ip_vs_proto.o \
$(ip_vs_proto-objs-y)
diff --git a/net/ipv4/ipvs/ip_vs_proto.c b/net/ipv4/ipvs/ip_vs_proto.c
index 253c462..867d4e9 100644
--- a/net/ipv4/ipvs/ip_vs_proto.c
+++ b/net/ipv4/ipvs/ip_vs_proto.c
@@ -216,9 +216,6 @@
#ifdef CONFIG_IP_VS_PROTO_UDP
REGISTER_PROTOCOL(&ip_vs_protocol_udp);
#endif
-#ifdef CONFIG_IP_VS_PROTO_ICMP
- REGISTER_PROTOCOL(&ip_vs_protocol_icmp);
-#endif
#ifdef CONFIG_IP_VS_PROTO_AH
REGISTER_PROTOCOL(&ip_vs_protocol_ah);
#endif
diff --git a/net/ipv4/ipvs/ip_vs_proto_icmp.c b/net/ipv4/ipvs/ip_vs_proto_icmp.c
deleted file mode 100644
index 191e94a..0000000
--- a/net/ipv4/ipvs/ip_vs_proto_icmp.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * ip_vs_proto_icmp.c: ICMP load balancing support for IP Virtual Server
- *
- * Authors: Julian Anastasov <ja@ssi.bg>, March 2002
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation;
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/icmp.h>
-#include <linux/netfilter.h>
-#include <linux/netfilter_ipv4.h>
-
-#include <net/ip_vs.h>
-
-
-static int icmp_timeouts[1] = { 1*60*HZ };
-
-static char * icmp_state_name_table[1] = { "ICMP" };
-
-static struct ip_vs_conn *
-icmp_conn_in_get(const struct sk_buff *skb,
- struct ip_vs_protocol *pp,
- const struct iphdr *iph,
- unsigned int proto_off,
- int inverse)
-{
-#if 0
- struct ip_vs_conn *cp;
-
- if (likely(!inverse)) {
- cp = ip_vs_conn_in_get(iph->protocol,
- iph->saddr, 0,
- iph->daddr, 0);
- } else {
- cp = ip_vs_conn_in_get(iph->protocol,
- iph->daddr, 0,
- iph->saddr, 0);
- }
-
- return cp;
-
-#else
- return NULL;
-#endif
-}
-
-static struct ip_vs_conn *
-icmp_conn_out_get(const struct sk_buff *skb,
- struct ip_vs_protocol *pp,
- const struct iphdr *iph,
- unsigned int proto_off,
- int inverse)
-{
-#if 0
- struct ip_vs_conn *cp;
-
- if (likely(!inverse)) {
- cp = ip_vs_conn_out_get(iph->protocol,
- iph->saddr, 0,
- iph->daddr, 0);
- } else {
- cp = ip_vs_conn_out_get(IPPROTO_UDP,
- iph->daddr, 0,
- iph->saddr, 0);
- }
-
- return cp;
-#else
- return NULL;
-#endif
-}
-
-static int
-icmp_conn_schedule(struct sk_buff *skb, struct ip_vs_protocol *pp,
- int *verdict, struct ip_vs_conn **cpp)
-{
- *verdict = NF_ACCEPT;
- return 0;
-}
-
-static int
-icmp_csum_check(struct sk_buff *skb, struct ip_vs_protocol *pp)
-{
- if (!(skb->nh.iph->frag_off & __constant_htons(IP_OFFSET))) {
- if (skb->ip_summed != CHECKSUM_UNNECESSARY) {
- if (ip_vs_checksum_complete(skb, skb->nh.iph->ihl * 4)) {
- IP_VS_DBG_RL_PKT(0, pp, skb, 0, "Failed checksum for");
- return 0;
- }
- }
- }
- return 1;
-}
-
-static void
-icmp_debug_packet(struct ip_vs_protocol *pp,
- const struct sk_buff *skb,
- int offset,
- const char *msg)
-{
- char buf[256];
- struct iphdr _iph, *ih;
-
- ih = skb_header_pointer(skb, offset, sizeof(_iph), &_iph);
- if (ih == NULL)
- sprintf(buf, "%s TRUNCATED", pp->name);
- else if (ih->frag_off & __constant_htons(IP_OFFSET))
- sprintf(buf, "%s %u.%u.%u.%u->%u.%u.%u.%u frag",
- pp->name, NIPQUAD(ih->saddr),
- NIPQUAD(ih->daddr));
- else {
- struct icmphdr _icmph, *ic;
-
- ic = skb_header_pointer(skb, offset + ih->ihl*4,
- sizeof(_icmph), &_icmph);
- if (ic == NULL)
- sprintf(buf, "%s TRUNCATED to %u bytes\n",
- pp->name, skb->len - offset);
- else
- sprintf(buf, "%s %u.%u.%u.%u->%u.%u.%u.%u T:%d C:%d",
- pp->name, NIPQUAD(ih->saddr),
- NIPQUAD(ih->daddr),
- ic->type, ic->code);
- }
- printk(KERN_DEBUG "IPVS: %s: %s\n", msg, buf);
-}
-
-static int
-icmp_state_transition(struct ip_vs_conn *cp, int direction,
- const struct sk_buff *skb,
- struct ip_vs_protocol *pp)
-{
- cp->timeout = pp->timeout_table[IP_VS_ICMP_S_NORMAL];
- return 1;
-}
-
-static int
-icmp_set_state_timeout(struct ip_vs_protocol *pp, char *sname, int to)
-{
- int num;
- char **names;
-
- num = IP_VS_ICMP_S_LAST;
- names = icmp_state_name_table;
- return ip_vs_set_state_timeout(pp->timeout_table, num, names, sname, to);
-}
-
-
-static void icmp_init(struct ip_vs_protocol *pp)
-{
- pp->timeout_table = icmp_timeouts;
-}
-
-static void icmp_exit(struct ip_vs_protocol *pp)
-{
-}
-
-struct ip_vs_protocol ip_vs_protocol_icmp = {
- .name = "ICMP",
- .protocol = IPPROTO_ICMP,
- .dont_defrag = 0,
- .init = icmp_init,
- .exit = icmp_exit,
- .conn_schedule = icmp_conn_schedule,
- .conn_in_get = icmp_conn_in_get,
- .conn_out_get = icmp_conn_out_get,
- .snat_handler = NULL,
- .dnat_handler = NULL,
- .csum_check = icmp_csum_check,
- .state_transition = icmp_state_transition,
- .register_app = NULL,
- .unregister_app = NULL,
- .app_conn_bind = NULL,
- .debug_packet = icmp_debug_packet,
- .timeout_change = NULL,
- .set_state_timeout = icmp_set_state_timeout,
-};
diff --git a/net/ipv4/multipath_drr.c b/net/ipv4/multipath_drr.c
index cf2e6bc..c9cf872 100644
--- a/net/ipv4/multipath_drr.c
+++ b/net/ipv4/multipath_drr.c
@@ -31,6 +31,7 @@
#include <linux/igmp.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/module.h>
#include <linux/mroute.h>
#include <linux/init.h>
#include <net/ip.h>
@@ -247,3 +248,4 @@
module_init(drr_init);
module_exit(drr_exit);
+MODULE_LICENSE("GPL");
diff --git a/net/ipv4/multipath_random.c b/net/ipv4/multipath_random.c
index 805a16e..5249dbe 100644
--- a/net/ipv4/multipath_random.c
+++ b/net/ipv4/multipath_random.c
@@ -31,6 +31,7 @@
#include <linux/igmp.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/module.h>
#include <linux/mroute.h>
#include <linux/init.h>
#include <net/ip.h>
@@ -126,3 +127,4 @@
module_init(random_init);
module_exit(random_exit);
+MODULE_LICENSE("GPL");
diff --git a/net/ipv4/multipath_rr.c b/net/ipv4/multipath_rr.c
index 061b6b2..b6cd287 100644
--- a/net/ipv4/multipath_rr.c
+++ b/net/ipv4/multipath_rr.c
@@ -31,6 +31,7 @@
#include <linux/igmp.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/module.h>
#include <linux/mroute.h>
#include <linux/init.h>
#include <net/ip.h>
@@ -93,3 +94,4 @@
module_init(rr_init);
module_exit(rr_exit);
+MODULE_LICENSE("GPL");
diff --git a/net/ipv4/multipath_wrandom.c b/net/ipv4/multipath_wrandom.c
index c3d2ca1..bd7d75b 100644
--- a/net/ipv4/multipath_wrandom.c
+++ b/net/ipv4/multipath_wrandom.c
@@ -31,6 +31,7 @@
#include <linux/igmp.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/module.h>
#include <linux/mroute.h>
#include <linux/init.h>
#include <net/ip.h>
@@ -342,3 +343,4 @@
module_init(wrandom_init);
module_exit(wrandom_exit);
+MODULE_LICENSE("GPL");
diff --git a/net/ipv4/netfilter/ip_conntrack_standalone.c b/net/ipv4/netfilter/ip_conntrack_standalone.c
index 46ca45f..bc59f7b 100644
--- a/net/ipv4/netfilter/ip_conntrack_standalone.c
+++ b/net/ipv4/netfilter/ip_conntrack_standalone.c
@@ -256,6 +256,7 @@
{
struct list_head *e = v;
+ ++*pos;
e = e->next;
if (e == &ip_conntrack_expect_list)
diff --git a/net/ipv4/netfilter/ipt_recent.c b/net/ipv4/netfilter/ipt_recent.c
index 25ab9fa..2d44b07 100644
--- a/net/ipv4/netfilter/ipt_recent.c
+++ b/net/ipv4/netfilter/ipt_recent.c
@@ -223,7 +223,7 @@
curr_table->table[count].last_seen = 0;
curr_table->table[count].addr = 0;
curr_table->table[count].ttl = 0;
- memset(curr_table->table[count].last_pkts,0,ip_pkt_list_tot*sizeof(u_int32_t));
+ memset(curr_table->table[count].last_pkts,0,ip_pkt_list_tot*sizeof(unsigned long));
curr_table->table[count].oldest_pkt = 0;
curr_table->table[count].time_pos = 0;
curr_table->time_info[count].position = count;
@@ -502,7 +502,7 @@
location = time_info[curr_table->time_pos].position;
hash_table[r_list[location].hash_entry] = -1;
hash_table[hash_result] = location;
- memset(r_list[location].last_pkts,0,ip_pkt_list_tot*sizeof(u_int32_t));
+ memset(r_list[location].last_pkts,0,ip_pkt_list_tot*sizeof(unsigned long));
r_list[location].time_pos = curr_table->time_pos;
r_list[location].addr = addr;
r_list[location].ttl = ttl;
@@ -631,7 +631,7 @@
r_list[location].last_seen = 0;
r_list[location].addr = 0;
r_list[location].ttl = 0;
- memset(r_list[location].last_pkts,0,ip_pkt_list_tot*sizeof(u_int32_t));
+ memset(r_list[location].last_pkts,0,ip_pkt_list_tot*sizeof(unsigned long));
r_list[location].oldest_pkt = 0;
ans = !info->invert;
}
@@ -734,10 +734,10 @@
memset(curr_table->table,0,sizeof(struct recent_ip_list)*ip_list_tot);
#ifdef DEBUG
if(debug) printk(KERN_INFO RECENT_NAME ": checkentry: Allocating %d for pkt_list.\n",
- sizeof(u_int32_t)*ip_pkt_list_tot*ip_list_tot);
+ sizeof(unsigned long)*ip_pkt_list_tot*ip_list_tot);
#endif
- hold = vmalloc(sizeof(u_int32_t)*ip_pkt_list_tot*ip_list_tot);
+ hold = vmalloc(sizeof(unsigned long)*ip_pkt_list_tot*ip_list_tot);
#ifdef DEBUG
if(debug) printk(KERN_INFO RECENT_NAME ": checkentry: After pkt_list allocation.\n");
#endif
diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c
index 3aafb29..23068bd 100644
--- a/net/ipv4/sysctl_net_ipv4.c
+++ b/net/ipv4/sysctl_net_ipv4.c
@@ -23,6 +23,7 @@
extern int sysctl_icmp_echo_ignore_all;
extern int sysctl_icmp_echo_ignore_broadcasts;
extern int sysctl_icmp_ignore_bogus_error_responses;
+extern int sysctl_icmp_errors_use_inbound_ifaddr;
/* From ip_fragment.c */
extern int sysctl_ipfrag_low_thresh;
@@ -396,6 +397,14 @@
.proc_handler = &proc_dointvec
},
{
+ .ctl_name = NET_IPV4_ICMP_ERRORS_USE_INBOUND_IFADDR,
+ .procname = "icmp_errors_use_inbound_ifaddr",
+ .data = &sysctl_icmp_errors_use_inbound_ifaddr,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec
+ },
+ {
.ctl_name = NET_IPV4_ROUTE,
.procname = "route",
.maxlen = 0,
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index a037baf..0d9a4fd 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2338,7 +2338,7 @@
(tcp_bhash_size * sizeof(struct tcp_bind_hashbucket));
order++)
;
- if (order > 4) {
+ if (order >= 4) {
sysctl_local_port_range[0] = 32768;
sysctl_local_port_range[1] = 61000;
sysctl_tcp_max_tw_buckets = 180000;
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 7744a25..2720899 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -372,6 +372,7 @@
ndev->regen_timer.data = (unsigned long) ndev;
if ((dev->flags&IFF_LOOPBACK) ||
dev->type == ARPHRD_TUNNEL ||
+ dev->type == ARPHRD_NONE ||
dev->type == ARPHRD_SIT) {
printk(KERN_INFO
"Disabled Privacy Extensions on device %p(%s)\n",
diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c
index 8e0f569..ff3ec98 100644
--- a/net/ipv6/icmp.c
+++ b/net/ipv6/icmp.c
@@ -277,8 +277,8 @@
{
struct inet6_dev *idev = NULL;
struct ipv6hdr *hdr = skb->nh.ipv6h;
- struct sock *sk = icmpv6_socket->sk;
- struct ipv6_pinfo *np = inet6_sk(sk);
+ struct sock *sk;
+ struct ipv6_pinfo *np;
struct in6_addr *saddr = NULL;
struct dst_entry *dst;
struct icmp6hdr tmp_hdr;
@@ -358,6 +358,9 @@
if (icmpv6_xmit_lock())
return;
+ sk = icmpv6_socket->sk;
+ np = inet6_sk(sk);
+
if (!icmpv6_xrlim_allow(sk, type, &fl))
goto out;
@@ -423,9 +426,9 @@
static void icmpv6_echo_reply(struct sk_buff *skb)
{
- struct sock *sk = icmpv6_socket->sk;
+ struct sock *sk;
struct inet6_dev *idev;
- struct ipv6_pinfo *np = inet6_sk(sk);
+ struct ipv6_pinfo *np;
struct in6_addr *saddr = NULL;
struct icmp6hdr *icmph = (struct icmp6hdr *) skb->h.raw;
struct icmp6hdr tmp_hdr;
@@ -454,6 +457,9 @@
if (icmpv6_xmit_lock())
return;
+ sk = icmpv6_socket->sk;
+ np = inet6_sk(sk);
+
if (!fl.oif && ipv6_addr_is_multicast(&fl.fl6_dst))
fl.oif = np->mcast_oif;
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index 3b1c9fa..ba3b0c2 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -882,6 +882,7 @@
t->parms.hop_limit = p->hop_limit;
t->parms.encap_limit = p->encap_limit;
t->parms.flowinfo = p->flowinfo;
+ t->parms.link = p->link;
ip6ip6_tnl_link_config(t);
return 0;
}
diff --git a/net/ipv6/ipv6_syms.c b/net/ipv6/ipv6_syms.c
index 2f4c91d..5ade5a5 100644
--- a/net/ipv6/ipv6_syms.c
+++ b/net/ipv6/ipv6_syms.c
@@ -37,5 +37,4 @@
EXPORT_SYMBOL(xfrm6_rcv);
#endif
EXPORT_SYMBOL(rt6_lookup);
-EXPORT_SYMBOL(fl6_sock_lookup);
EXPORT_SYMBOL(ipv6_push_nfrag_opts);
diff --git a/net/sched/Kconfig b/net/sched/Kconfig
index b094118..b22c9be 100644
--- a/net/sched/Kconfig
+++ b/net/sched/Kconfig
@@ -405,7 +405,7 @@
---help---
Size of the local stack variable used while evaluating the tree of
ematches. Limits the depth of the tree, i.e. the number of
- encapsulated precedences. Every level requires 4 bytes of addtional
+ encapsulated precedences. Every level requires 4 bytes of additional
stack space.
config NET_EMATCH_CMP
diff --git a/net/sched/act_api.c b/net/sched/act_api.c
index cafcb08..914c85f 100644
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -881,7 +881,7 @@
link_p[RTM_GETACTION-RTM_BASE].dumpit = tc_dump_action;
}
- printk("TC classifier action (bugs to netdev@oss.sgi.com cc "
+ printk("TC classifier action (bugs to netdev@vger.kernel.org cc "
"hadi@cyberus.ca)\n");
return 0;
}
diff --git a/net/sched/cls_basic.c b/net/sched/cls_basic.c
index 0d2d441..dfb300b 100644
--- a/net/sched/cls_basic.c
+++ b/net/sched/cls_basic.c
@@ -261,6 +261,9 @@
rta = (struct rtattr *) b;
RTA_PUT(skb, TCA_OPTIONS, 0, NULL);
+ if (f->res.classid)
+ RTA_PUT(skb, TCA_BASIC_CLASSID, sizeof(u32), &f->res.classid);
+
if (tcf_exts_dump(skb, &f->exts, &basic_ext_map) < 0 ||
tcf_em_tree_dump(skb, &f->ematches, TCA_BASIC_EMATCHES) < 0)
goto rtattr_failure;
diff --git a/net/sched/em_meta.c b/net/sched/em_meta.c
index f1eeaf6..48bb23c 100644
--- a/net/sched/em_meta.c
+++ b/net/sched/em_meta.c
@@ -32,7 +32,7 @@
* +-----------+ +-----------+
* | |
* ---> meta_ops[INT][INDEV](...) |
- * | |
+ * | |
* ----------- |
* V V
* +-----------+ +-----------+
@@ -70,6 +70,7 @@
#include <net/dst.h>
#include <net/route.h>
#include <net/pkt_cls.h>
+#include <net/sock.h>
struct meta_obj
{
@@ -284,6 +285,214 @@
}
/**************************************************************************
+ * Socket Attributes
+ **************************************************************************/
+
+#define SKIP_NONLOCAL(skb) \
+ if (unlikely(skb->sk == NULL)) { \
+ *err = -1; \
+ return; \
+ }
+
+META_COLLECTOR(int_sk_family)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_family;
+}
+
+META_COLLECTOR(int_sk_state)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_state;
+}
+
+META_COLLECTOR(int_sk_reuse)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_reuse;
+}
+
+META_COLLECTOR(int_sk_bound_if)
+{
+ SKIP_NONLOCAL(skb);
+ /* No error if bound_dev_if is 0, legal userspace check */
+ dst->value = skb->sk->sk_bound_dev_if;
+}
+
+META_COLLECTOR(var_sk_bound_if)
+{
+ SKIP_NONLOCAL(skb);
+
+ if (skb->sk->sk_bound_dev_if == 0) {
+ dst->value = (unsigned long) "any";
+ dst->len = 3;
+ } else {
+ struct net_device *dev;
+
+ dev = dev_get_by_index(skb->sk->sk_bound_dev_if);
+ *err = var_dev(dev, dst);
+ if (dev)
+ dev_put(dev);
+ }
+}
+
+META_COLLECTOR(int_sk_refcnt)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = atomic_read(&skb->sk->sk_refcnt);
+}
+
+META_COLLECTOR(int_sk_rcvbuf)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_rcvbuf;
+}
+
+META_COLLECTOR(int_sk_shutdown)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_shutdown;
+}
+
+META_COLLECTOR(int_sk_proto)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_protocol;
+}
+
+META_COLLECTOR(int_sk_type)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_type;
+}
+
+META_COLLECTOR(int_sk_rmem_alloc)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = atomic_read(&skb->sk->sk_rmem_alloc);
+}
+
+META_COLLECTOR(int_sk_wmem_alloc)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = atomic_read(&skb->sk->sk_wmem_alloc);
+}
+
+META_COLLECTOR(int_sk_omem_alloc)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = atomic_read(&skb->sk->sk_omem_alloc);
+}
+
+META_COLLECTOR(int_sk_rcv_qlen)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_receive_queue.qlen;
+}
+
+META_COLLECTOR(int_sk_snd_qlen)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_write_queue.qlen;
+}
+
+META_COLLECTOR(int_sk_wmem_queued)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_wmem_queued;
+}
+
+META_COLLECTOR(int_sk_fwd_alloc)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_forward_alloc;
+}
+
+META_COLLECTOR(int_sk_sndbuf)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_sndbuf;
+}
+
+META_COLLECTOR(int_sk_alloc)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_allocation;
+}
+
+META_COLLECTOR(int_sk_route_caps)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_route_caps;
+}
+
+META_COLLECTOR(int_sk_hashent)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_hashent;
+}
+
+META_COLLECTOR(int_sk_lingertime)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_lingertime / HZ;
+}
+
+META_COLLECTOR(int_sk_err_qlen)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_error_queue.qlen;
+}
+
+META_COLLECTOR(int_sk_ack_bl)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_ack_backlog;
+}
+
+META_COLLECTOR(int_sk_max_ack_bl)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_max_ack_backlog;
+}
+
+META_COLLECTOR(int_sk_prio)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_priority;
+}
+
+META_COLLECTOR(int_sk_rcvlowat)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_rcvlowat;
+}
+
+META_COLLECTOR(int_sk_rcvtimeo)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_rcvtimeo / HZ;
+}
+
+META_COLLECTOR(int_sk_sndtimeo)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_sndtimeo / HZ;
+}
+
+META_COLLECTOR(int_sk_sendmsg_off)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_sndmsg_off;
+}
+
+META_COLLECTOR(int_sk_write_pend)
+{
+ SKIP_NONLOCAL(skb);
+ dst->value = skb->sk->sk_write_pending;
+}
+
+/**************************************************************************
* Meta value collectors assignment table
**************************************************************************/
@@ -293,41 +502,75 @@
struct meta_value *, struct meta_obj *, int *);
};
+#define META_ID(name) TCF_META_ID_##name
+#define META_FUNC(name) { .get = meta_##name }
+
/* Meta value operations table listing all meta value collectors and
* assigns them to a type and meta id. */
static struct meta_ops __meta_ops[TCF_META_TYPE_MAX+1][TCF_META_ID_MAX+1] = {
[TCF_META_TYPE_VAR] = {
- [TCF_META_ID_DEV] = { .get = meta_var_dev },
- [TCF_META_ID_INDEV] = { .get = meta_var_indev },
- [TCF_META_ID_REALDEV] = { .get = meta_var_realdev }
+ [META_ID(DEV)] = META_FUNC(var_dev),
+ [META_ID(INDEV)] = META_FUNC(var_indev),
+ [META_ID(REALDEV)] = META_FUNC(var_realdev),
+ [META_ID(SK_BOUND_IF)] = META_FUNC(var_sk_bound_if),
},
[TCF_META_TYPE_INT] = {
- [TCF_META_ID_RANDOM] = { .get = meta_int_random },
- [TCF_META_ID_LOADAVG_0] = { .get = meta_int_loadavg_0 },
- [TCF_META_ID_LOADAVG_1] = { .get = meta_int_loadavg_1 },
- [TCF_META_ID_LOADAVG_2] = { .get = meta_int_loadavg_2 },
- [TCF_META_ID_DEV] = { .get = meta_int_dev },
- [TCF_META_ID_INDEV] = { .get = meta_int_indev },
- [TCF_META_ID_REALDEV] = { .get = meta_int_realdev },
- [TCF_META_ID_PRIORITY] = { .get = meta_int_priority },
- [TCF_META_ID_PROTOCOL] = { .get = meta_int_protocol },
- [TCF_META_ID_SECURITY] = { .get = meta_int_security },
- [TCF_META_ID_PKTTYPE] = { .get = meta_int_pkttype },
- [TCF_META_ID_PKTLEN] = { .get = meta_int_pktlen },
- [TCF_META_ID_DATALEN] = { .get = meta_int_datalen },
- [TCF_META_ID_MACLEN] = { .get = meta_int_maclen },
+ [META_ID(RANDOM)] = META_FUNC(int_random),
+ [META_ID(LOADAVG_0)] = META_FUNC(int_loadavg_0),
+ [META_ID(LOADAVG_1)] = META_FUNC(int_loadavg_1),
+ [META_ID(LOADAVG_2)] = META_FUNC(int_loadavg_2),
+ [META_ID(DEV)] = META_FUNC(int_dev),
+ [META_ID(INDEV)] = META_FUNC(int_indev),
+ [META_ID(REALDEV)] = META_FUNC(int_realdev),
+ [META_ID(PRIORITY)] = META_FUNC(int_priority),
+ [META_ID(PROTOCOL)] = META_FUNC(int_protocol),
+ [META_ID(SECURITY)] = META_FUNC(int_security),
+ [META_ID(PKTTYPE)] = META_FUNC(int_pkttype),
+ [META_ID(PKTLEN)] = META_FUNC(int_pktlen),
+ [META_ID(DATALEN)] = META_FUNC(int_datalen),
+ [META_ID(MACLEN)] = META_FUNC(int_maclen),
#ifdef CONFIG_NETFILTER
- [TCF_META_ID_NFMARK] = { .get = meta_int_nfmark },
+ [META_ID(NFMARK)] = META_FUNC(int_nfmark),
#endif
- [TCF_META_ID_TCINDEX] = { .get = meta_int_tcindex },
+ [META_ID(TCINDEX)] = META_FUNC(int_tcindex),
#ifdef CONFIG_NET_CLS_ACT
- [TCF_META_ID_TCVERDICT] = { .get = meta_int_tcverd },
- [TCF_META_ID_TCCLASSID] = { .get = meta_int_tcclassid },
+ [META_ID(TCVERDICT)] = META_FUNC(int_tcverd),
+ [META_ID(TCCLASSID)] = META_FUNC(int_tcclassid),
#endif
#ifdef CONFIG_NET_CLS_ROUTE
- [TCF_META_ID_RTCLASSID] = { .get = meta_int_rtclassid },
+ [META_ID(RTCLASSID)] = META_FUNC(int_rtclassid),
#endif
- [TCF_META_ID_RTIIF] = { .get = meta_int_rtiif }
+ [META_ID(RTIIF)] = META_FUNC(int_rtiif),
+ [META_ID(SK_FAMILY)] = META_FUNC(int_sk_family),
+ [META_ID(SK_STATE)] = META_FUNC(int_sk_state),
+ [META_ID(SK_REUSE)] = META_FUNC(int_sk_reuse),
+ [META_ID(SK_BOUND_IF)] = META_FUNC(int_sk_bound_if),
+ [META_ID(SK_REFCNT)] = META_FUNC(int_sk_refcnt),
+ [META_ID(SK_RCVBUF)] = META_FUNC(int_sk_rcvbuf),
+ [META_ID(SK_SNDBUF)] = META_FUNC(int_sk_sndbuf),
+ [META_ID(SK_SHUTDOWN)] = META_FUNC(int_sk_shutdown),
+ [META_ID(SK_PROTO)] = META_FUNC(int_sk_proto),
+ [META_ID(SK_TYPE)] = META_FUNC(int_sk_type),
+ [META_ID(SK_RMEM_ALLOC)] = META_FUNC(int_sk_rmem_alloc),
+ [META_ID(SK_WMEM_ALLOC)] = META_FUNC(int_sk_wmem_alloc),
+ [META_ID(SK_OMEM_ALLOC)] = META_FUNC(int_sk_omem_alloc),
+ [META_ID(SK_WMEM_QUEUED)] = META_FUNC(int_sk_wmem_queued),
+ [META_ID(SK_RCV_QLEN)] = META_FUNC(int_sk_rcv_qlen),
+ [META_ID(SK_SND_QLEN)] = META_FUNC(int_sk_snd_qlen),
+ [META_ID(SK_ERR_QLEN)] = META_FUNC(int_sk_err_qlen),
+ [META_ID(SK_FORWARD_ALLOCS)] = META_FUNC(int_sk_fwd_alloc),
+ [META_ID(SK_ALLOCS)] = META_FUNC(int_sk_alloc),
+ [META_ID(SK_ROUTE_CAPS)] = META_FUNC(int_sk_route_caps),
+ [META_ID(SK_HASHENT)] = META_FUNC(int_sk_hashent),
+ [META_ID(SK_LINGERTIME)] = META_FUNC(int_sk_lingertime),
+ [META_ID(SK_ACK_BACKLOG)] = META_FUNC(int_sk_ack_bl),
+ [META_ID(SK_MAX_ACK_BACKLOG)] = META_FUNC(int_sk_max_ack_bl),
+ [META_ID(SK_PRIO)] = META_FUNC(int_sk_prio),
+ [META_ID(SK_RCVLOWAT)] = META_FUNC(int_sk_rcvlowat),
+ [META_ID(SK_RCVTIMEO)] = META_FUNC(int_sk_rcvtimeo),
+ [META_ID(SK_SNDTIMEO)] = META_FUNC(int_sk_sndtimeo),
+ [META_ID(SK_SENDMSG_OFF)] = META_FUNC(int_sk_sendmsg_off),
+ [META_ID(SK_WRITE_PENDING)] = META_FUNC(int_sk_write_pend),
}
};
@@ -396,9 +639,9 @@
/* Let gcc optimize it, the unlikely is not really based on
* some numbers but jump free code for mismatches seems
* more logical. */
- if (unlikely(a == b))
+ if (unlikely(a->value == b->value))
return 0;
- else if (a < b)
+ else if (a->value < b->value)
return -1;
else
return 1;
diff --git a/net/sctp/input.c b/net/sctp/input.c
index b719a77..fffc880 100644
--- a/net/sctp/input.c
+++ b/net/sctp/input.c
@@ -178,6 +178,37 @@
asoc = __sctp_rcv_lookup(skb, &src, &dest, &transport);
+ if (!asoc)
+ ep = __sctp_rcv_lookup_endpoint(&dest);
+
+ /* Retrieve the common input handling substructure. */
+ rcvr = asoc ? &asoc->base : &ep->base;
+ sk = rcvr->sk;
+
+ /*
+ * If a frame arrives on an interface and the receiving socket is
+ * bound to another interface, via SO_BINDTODEVICE, treat it as OOTB
+ */
+ if (sk->sk_bound_dev_if && (sk->sk_bound_dev_if != af->skb_iif(skb)))
+ {
+ sock_put(sk);
+ if (asoc) {
+ sctp_association_put(asoc);
+ asoc = NULL;
+ } else {
+ sctp_endpoint_put(ep);
+ ep = NULL;
+ }
+ sk = sctp_get_ctl_sock();
+ ep = sctp_sk(sk)->ep;
+ sctp_endpoint_hold(ep);
+ sock_hold(sk);
+ rcvr = &ep->base;
+ }
+
+ if (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf)
+ goto discard_release;
+
/*
* RFC 2960, 8.4 - Handle "Out of the blue" Packets.
* An SCTP packet is called an "out of the blue" (OOTB)
@@ -187,22 +218,12 @@
* packet belongs.
*/
if (!asoc) {
- ep = __sctp_rcv_lookup_endpoint(&dest);
if (sctp_rcv_ootb(skb)) {
SCTP_INC_STATS_BH(SCTP_MIB_OUTOFBLUES);
goto discard_release;
}
}
- /* Retrieve the common input handling substructure. */
- rcvr = asoc ? &asoc->base : &ep->base;
- sk = rcvr->sk;
-
- if ((sk) && (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf)) {
- goto discard_release;
- }
-
-
/* SCTP seems to always need a timestamp right now (FIXME) */
if (skb->stamp.tv_sec == 0) {
do_gettimeofday(&skb->stamp);
@@ -265,13 +286,11 @@
discard_release:
/* Release any structures we may be holding. */
- if (asoc) {
- sock_put(asoc->base.sk);
+ sock_put(sk);
+ if (asoc)
sctp_association_put(asoc);
- } else {
- sock_put(ep->base.sk);
+ else
sctp_endpoint_put(ep);
- }
goto discard_it;
}
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index c9d9ea0..c7e42d1 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -812,26 +812,23 @@
if (addr->sa.sa_family != AF_INET6)
af = sctp_get_af_specific(addr->sa.sa_family);
else {
- struct sock *sk;
int type = ipv6_addr_type(&addr->v6.sin6_addr);
- sk = sctp_opt2sk(opt);
- if (type & IPV6_ADDR_LINKLOCAL) {
- /* Note: Behavior similar to af_inet6.c:
- * 1) Overrides previous bound_dev_if
- * 2) Destructive even if bind isn't successful.
- */
+ struct net_device *dev;
- if (addr->v6.sin6_scope_id)
- sk->sk_bound_dev_if = addr->v6.sin6_scope_id;
- if (!sk->sk_bound_dev_if)
+ if (type & IPV6_ADDR_LINKLOCAL) {
+ if (!addr->v6.sin6_scope_id)
return 0;
+ dev = dev_get_by_index(addr->v6.sin6_scope_id);
+ if (!dev)
+ return 0;
+ dev_put(dev);
}
af = opt->pf->af;
}
return af->available(addr, opt);
}
-/* Verify that the provided sockaddr looks bindable. Common verification,
+/* Verify that the provided sockaddr looks sendable. Common verification,
* has already been taken care of.
*/
static int sctp_inet6_send_verify(struct sctp_sock *opt, union sctp_addr *addr)
@@ -842,19 +839,16 @@
if (addr->sa.sa_family != AF_INET6)
af = sctp_get_af_specific(addr->sa.sa_family);
else {
- struct sock *sk;
int type = ipv6_addr_type(&addr->v6.sin6_addr);
- sk = sctp_opt2sk(opt);
- if (type & IPV6_ADDR_LINKLOCAL) {
- /* Note: Behavior similar to af_inet6.c:
- * 1) Overrides previous bound_dev_if
- * 2) Destructive even if bind isn't successful.
- */
+ struct net_device *dev;
- if (addr->v6.sin6_scope_id)
- sk->sk_bound_dev_if = addr->v6.sin6_scope_id;
- if (!sk->sk_bound_dev_if)
+ if (type & IPV6_ADDR_LINKLOCAL) {
+ if (!addr->v6.sin6_scope_id)
return 0;
+ dev = dev_get_by_index(addr->v6.sin6_scope_id);
+ if (!dev)
+ return 0;
+ dev_put(dev);
}
af = opt->pf->af;
}
diff --git a/net/sctp/proc.c b/net/sctp/proc.c
index e42fd8c..98d49ec9 100644
--- a/net/sctp/proc.c
+++ b/net/sctp/proc.c
@@ -132,14 +132,25 @@
static void sctp_seq_dump_local_addrs(struct seq_file *seq, struct sctp_ep_common *epb)
{
struct list_head *pos;
+ struct sctp_association *asoc;
struct sctp_sockaddr_entry *laddr;
- union sctp_addr *addr;
+ struct sctp_transport *peer;
+ union sctp_addr *addr, *primary = NULL;
struct sctp_af *af;
+ if (epb->type == SCTP_EP_TYPE_ASSOCIATION) {
+ asoc = sctp_assoc(epb);
+ peer = asoc->peer.primary_path;
+ primary = &peer->saddr;
+ }
+
list_for_each(pos, &epb->bind_addr.address_list) {
laddr = list_entry(pos, struct sctp_sockaddr_entry, list);
addr = (union sctp_addr *)&laddr->a;
af = sctp_get_af_specific(addr->sa.sa_family);
+ if (primary && af->cmp_addr(addr, primary)) {
+ seq_printf(seq, "*");
+ }
af->seq_dump_addr(seq, addr);
}
}
@@ -149,17 +160,54 @@
{
struct list_head *pos;
struct sctp_transport *transport;
- union sctp_addr *addr;
+ union sctp_addr *addr, *primary;
struct sctp_af *af;
+ primary = &(assoc->peer.primary_addr);
list_for_each(pos, &assoc->peer.transport_addr_list) {
transport = list_entry(pos, struct sctp_transport, transports);
addr = (union sctp_addr *)&transport->ipaddr;
af = sctp_get_af_specific(addr->sa.sa_family);
+ if (af->cmp_addr(addr, primary)) {
+ seq_printf(seq, "*");
+ }
af->seq_dump_addr(seq, addr);
}
}
+static void * sctp_eps_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ if (*pos > sctp_ep_hashsize)
+ return NULL;
+
+ if (*pos < 0)
+ *pos = 0;
+
+ if (*pos == 0)
+ seq_printf(seq, " ENDPT SOCK STY SST HBKT LPORT UID INODE LADDRS\n");
+
+ ++*pos;
+
+ return (void *)pos;
+}
+
+static void sctp_eps_seq_stop(struct seq_file *seq, void *v)
+{
+ return;
+}
+
+
+static void * sctp_eps_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ if (*pos > sctp_ep_hashsize)
+ return NULL;
+
+ ++*pos;
+
+ return pos;
+}
+
+
/* Display sctp endpoints (/proc/net/sctp/eps). */
static int sctp_eps_seq_show(struct seq_file *seq, void *v)
{
@@ -167,38 +215,50 @@
struct sctp_ep_common *epb;
struct sctp_endpoint *ep;
struct sock *sk;
- int hash;
+ int hash = *(int *)v;
- seq_printf(seq, " ENDPT SOCK STY SST HBKT LPORT LADDRS\n");
- for (hash = 0; hash < sctp_ep_hashsize; hash++) {
- head = &sctp_ep_hashtable[hash];
- read_lock(&head->lock);
- for (epb = head->chain; epb; epb = epb->next) {
- ep = sctp_ep(epb);
- sk = epb->sk;
- seq_printf(seq, "%8p %8p %-3d %-3d %-4d %-5d ", ep, sk,
- sctp_sk(sk)->type, sk->sk_state, hash,
- epb->bind_addr.port);
- sctp_seq_dump_local_addrs(seq, epb);
- seq_printf(seq, "\n");
- }
- read_unlock(&head->lock);
+ if (hash > sctp_ep_hashsize)
+ return -ENOMEM;
+
+ head = &sctp_ep_hashtable[hash-1];
+ sctp_local_bh_disable();
+ read_lock(&head->lock);
+ for (epb = head->chain; epb; epb = epb->next) {
+ ep = sctp_ep(epb);
+ sk = epb->sk;
+ seq_printf(seq, "%8p %8p %-3d %-3d %-4d %-5d %5d %5lu ", ep, sk,
+ sctp_sk(sk)->type, sk->sk_state, hash-1,
+ epb->bind_addr.port,
+ sock_i_uid(sk), sock_i_ino(sk));
+
+ sctp_seq_dump_local_addrs(seq, epb);
+ seq_printf(seq, "\n");
}
+ read_unlock(&head->lock);
+ sctp_local_bh_enable();
return 0;
}
+static struct seq_operations sctp_eps_ops = {
+ .start = sctp_eps_seq_start,
+ .next = sctp_eps_seq_next,
+ .stop = sctp_eps_seq_stop,
+ .show = sctp_eps_seq_show,
+};
+
+
/* Initialize the seq file operations for 'eps' object. */
static int sctp_eps_seq_open(struct inode *inode, struct file *file)
{
- return single_open(file, sctp_eps_seq_show, NULL);
+ return seq_open(file, &sctp_eps_ops);
}
static struct file_operations sctp_eps_seq_fops = {
.open = sctp_eps_seq_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = single_release,
+ .release = seq_release,
};
/* Set up the proc fs entry for 'eps' object. */
@@ -221,6 +281,40 @@
remove_proc_entry("eps", proc_net_sctp);
}
+
+static void * sctp_assocs_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ if (*pos > sctp_assoc_hashsize)
+ return NULL;
+
+ if (*pos < 0)
+ *pos = 0;
+
+ if (*pos == 0)
+ seq_printf(seq, " ASSOC SOCK STY SST ST HBKT ASSOC-ID TX_QUEUE RX_QUEUE UID INODE LPORT "
+ "RPORT LADDRS <-> RADDRS\n");
+
+ ++*pos;
+
+ return (void *)pos;
+}
+
+static void sctp_assocs_seq_stop(struct seq_file *seq, void *v)
+{
+ return;
+}
+
+
+static void * sctp_assocs_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ if (*pos > sctp_assoc_hashsize)
+ return NULL;
+
+ ++*pos;
+
+ return pos;
+}
+
/* Display sctp associations (/proc/net/sctp/assocs). */
static int sctp_assocs_seq_show(struct seq_file *seq, void *v)
{
@@ -228,43 +322,57 @@
struct sctp_ep_common *epb;
struct sctp_association *assoc;
struct sock *sk;
- int hash;
+ int hash = *(int *)v;
- seq_printf(seq, " ASSOC SOCK STY SST ST HBKT LPORT RPORT "
- "LADDRS <-> RADDRS\n");
- for (hash = 0; hash < sctp_assoc_hashsize; hash++) {
- head = &sctp_assoc_hashtable[hash];
- read_lock(&head->lock);
- for (epb = head->chain; epb; epb = epb->next) {
- assoc = sctp_assoc(epb);
- sk = epb->sk;
- seq_printf(seq,
- "%8p %8p %-3d %-3d %-2d %-4d %-5d %-5d ",
- assoc, sk, sctp_sk(sk)->type, sk->sk_state,
- assoc->state, hash, epb->bind_addr.port,
- assoc->peer.port);
- sctp_seq_dump_local_addrs(seq, epb);
- seq_printf(seq, "<-> ");
- sctp_seq_dump_remote_addrs(seq, assoc);
- seq_printf(seq, "\n");
- }
- read_unlock(&head->lock);
+ if (hash > sctp_assoc_hashsize)
+ return -ENOMEM;
+
+ head = &sctp_assoc_hashtable[hash-1];
+ sctp_local_bh_disable();
+ read_lock(&head->lock);
+ for (epb = head->chain; epb; epb = epb->next) {
+ assoc = sctp_assoc(epb);
+ sk = epb->sk;
+ seq_printf(seq,
+ "%8p %8p %-3d %-3d %-2d %-4d %4d %8d %8d %7d %5lu %-5d %5d ",
+ assoc, sk, sctp_sk(sk)->type, sk->sk_state,
+ assoc->state, hash-1, assoc->assoc_id,
+ (sk->sk_rcvbuf - assoc->rwnd),
+ assoc->sndbuf_used,
+ sock_i_uid(sk), sock_i_ino(sk),
+ epb->bind_addr.port,
+ assoc->peer.port);
+
+ seq_printf(seq, " ");
+ sctp_seq_dump_local_addrs(seq, epb);
+ seq_printf(seq, "<-> ");
+ sctp_seq_dump_remote_addrs(seq, assoc);
+ seq_printf(seq, "\n");
}
+ read_unlock(&head->lock);
+ sctp_local_bh_enable();
return 0;
}
+static struct seq_operations sctp_assoc_ops = {
+ .start = sctp_assocs_seq_start,
+ .next = sctp_assocs_seq_next,
+ .stop = sctp_assocs_seq_stop,
+ .show = sctp_assocs_seq_show,
+};
+
/* Initialize the seq file operations for 'assocs' object. */
static int sctp_assocs_seq_open(struct inode *inode, struct file *file)
{
- return single_open(file, sctp_assocs_seq_show, NULL);
+ return seq_open(file, &sctp_assoc_ops);
}
static struct file_operations sctp_assocs_seq_fops = {
.open = sctp_assocs_seq_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = single_release,
+ .release = seq_release,
};
/* Set up the proc fs entry for 'assocs' object. */
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 2e1f9c3..5135e1a 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -378,10 +378,13 @@
{
int ret = inet_addr_type(addr->v4.sin_addr.s_addr);
- /* FIXME: ip_nonlocal_bind sysctl support. */
- if (addr->v4.sin_addr.s_addr != INADDR_ANY && ret != RTN_LOCAL)
+ if (addr->v4.sin_addr.s_addr != INADDR_ANY &&
+ ret != RTN_LOCAL &&
+ !sp->inet.freebind &&
+ !sysctl_ip_nonlocal_bind)
return 0;
+
return 1;
}
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index 0b338ec..2a3c0e0 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -4686,6 +4686,7 @@
struct sctp_endpoint *newep = newsp->ep;
struct sk_buff *skb, *tmp;
struct sctp_ulpevent *event;
+ int flags = 0;
/* Migrate socket buffer sizes and all the socket level options to the
* new socket.
@@ -4707,6 +4708,17 @@
sctp_sk(newsk)->bind_hash = pp;
inet_sk(newsk)->num = inet_sk(oldsk)->num;
+ /* Copy the bind_addr list from the original endpoint to the new
+ * endpoint so that we can handle restarts properly
+ */
+ if (assoc->peer.ipv4_address)
+ flags |= SCTP_ADDR4_PEERSUPP;
+ if (assoc->peer.ipv6_address)
+ flags |= SCTP_ADDR6_PEERSUPP;
+ sctp_bind_addr_copy(&newsp->ep->base.bind_addr,
+ &oldsp->ep->base.bind_addr,
+ SCTP_SCOPE_GLOBAL, GFP_KERNEL, flags);
+
/* Move any messages in the old socket's receive queue that are for the
* peeled off association to the new socket's receive queue.
*/
diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c
index 84b0bbd..aae6614 100644
--- a/sound/usb/usbaudio.c
+++ b/sound/usb/usbaudio.c
@@ -3289,7 +3289,7 @@
}
usb_chip[chip->index] = NULL;
up(®ister_mutex);
- snd_card_free_in_thread(card);
+ snd_card_free(card);
} else {
up(®ister_mutex);
}
diff --git a/sound/usb/usx2y/usbusx2y.c b/sound/usb/usx2y/usbusx2y.c
index b06a267..89ee8b7 100644
--- a/sound/usb/usx2y/usbusx2y.c
+++ b/sound/usb/usx2y/usbusx2y.c
@@ -1,6 +1,11 @@
/*
* usbusy2y.c - ALSA USB US-428 Driver
*
+2005-04-14 Karsten Wiese
+ Version 0.8.7.2:
+ Call snd_card_free() instead of snd_card_free_in_thread() to prevent oops with dead keyboard symptom.
+ Tested ok with kernel 2.6.12-rc2.
+
2004-12-14 Karsten Wiese
Version 0.8.7.1:
snd_pcm_open for rawusb pcm-devices now returns -EBUSY if called without rawusb's hwdep device being open.
@@ -143,7 +148,7 @@
MODULE_AUTHOR("Karsten Wiese <annabellesgarden@yahoo.de>");
-MODULE_DESCRIPTION("TASCAM "NAME_ALLCAPS" Version 0.8.7.1");
+MODULE_DESCRIPTION("TASCAM "NAME_ALLCAPS" Version 0.8.7.2");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{TASCAM(0x1604), "NAME_ALLCAPS"(0x8001)(0x8005)(0x8007) }}");
@@ -430,8 +435,6 @@
if (ptr) {
usX2Ydev_t* usX2Y = usX2Y((snd_card_t*)ptr);
struct list_head* p;
- if (usX2Y->chip_status == USX2Y_STAT_CHIP_HUP) // on 2.6.1 kernel snd_usbmidi_disconnect()
- return; // calls us back. better leave :-) .
usX2Y->chip.shutdown = 1;
usX2Y->chip_status = USX2Y_STAT_CHIP_HUP;
usX2Y_unlinkSeq(&usX2Y->AS04);
@@ -443,7 +446,7 @@
}
if (usX2Y->us428ctls_sharedmem)
wake_up(&usX2Y->us428ctls_wait_queue_head);
- snd_card_free_in_thread((snd_card_t*)ptr);
+ snd_card_free((snd_card_t*)ptr);
}
}