drivers/leds/leds-lp5521.c: support led pattern data
The lp5521 has autonomous operation mode without external control.
Using lp5521_platform_data, various led patterns can be configurable.
For supporting this feature, new functions and device attribute are
added.
Structure of lp5521_led_pattern: 3 channels are supported - red, green
and blue. Pattern(s) of each channel and numbers of pattern(s) are
defined in the pla= tform data. Pattern data are hexa codes which
include pattern commands such like set pwm, wait, ramp up/down, branch
and so on.
Pattern mode functions:
* lp5521_clear_program_memory
Before running new led pattern, program memory should be cleared.
* lp5521_write_program_memory
Pattern data updated in the program memory via the i2c.
* lp5521_get_pattern
Get pattern from predefined in the platform data.
* lp5521_run_led_pattern
Stop current pattern or run new pattern.
Transition time is required between different operation mode.
Device attribute - 'led_pattern': To load specific led pattern, new device
attribute is added.
When the lp5521 driver is unloaded, stop current led pattern mode.
Documentation updated : description about how to define the led patterns
and example.
[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Arun MURTHY <arun.murthy@stericsson.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/leds/leds-lp5521.c b/drivers/leds/leds-lp5521.c
index 9682ece..007c7c9 100644
--- a/drivers/leds/leds-lp5521.c
+++ b/drivers/leds/leds-lp5521.c
@@ -88,6 +88,9 @@
/* default R channel current register value */
#define LP5521_REG_R_CURR_DEFAULT 0xAF
+/* Pattern Mode */
+#define PATTERN_OFF 0
+
struct lp5521_engine {
int id;
u8 mode;
@@ -493,7 +496,7 @@
ssize_t ret;
unsigned long curr;
- if (strict_strtoul(buf, 0, &curr))
+ if (kstrtoul(buf, 0, &curr))
return -EINVAL;
if (curr > led->max_current)
@@ -525,6 +528,100 @@
return sprintf(buf, "%s\n", ret ? "FAIL" : "OK");
}
+static void lp5521_clear_program_memory(struct i2c_client *cl)
+{
+ int i;
+ u8 rgb_mem[] = {
+ LP5521_REG_R_PROG_MEM,
+ LP5521_REG_G_PROG_MEM,
+ LP5521_REG_B_PROG_MEM,
+ };
+
+ for (i = 0; i < ARRAY_SIZE(rgb_mem); i++) {
+ lp5521_write(cl, rgb_mem[i], 0);
+ lp5521_write(cl, rgb_mem[i] + 1, 0);
+ }
+}
+
+static void lp5521_write_program_memory(struct i2c_client *cl,
+ u8 base, u8 *rgb, int size)
+{
+ int i;
+
+ if (!rgb || size <= 0)
+ return;
+
+ for (i = 0; i < size; i++)
+ lp5521_write(cl, base + i, *(rgb + i));
+
+ lp5521_write(cl, base + i, 0);
+ lp5521_write(cl, base + i + 1, 0);
+}
+
+static inline struct lp5521_led_pattern *lp5521_get_pattern
+ (struct lp5521_chip *chip, u8 offset)
+{
+ struct lp5521_led_pattern *ptn;
+ ptn = chip->pdata->patterns + (offset - 1);
+ return ptn;
+}
+
+static void lp5521_run_led_pattern(int mode, struct lp5521_chip *chip)
+{
+ struct lp5521_led_pattern *ptn;
+ struct i2c_client *cl = chip->client;
+ int num_patterns = chip->pdata->num_patterns;
+
+ if (mode > num_patterns || !(chip->pdata->patterns))
+ return;
+
+ if (mode == PATTERN_OFF) {
+ lp5521_write(cl, LP5521_REG_ENABLE,
+ LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM);
+ usleep_range(1000, 2000);
+ lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_DIRECT);
+ } else {
+ ptn = lp5521_get_pattern(chip, mode);
+ if (!ptn)
+ return;
+
+ lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_LOAD);
+ usleep_range(1000, 2000);
+
+ lp5521_clear_program_memory(cl);
+
+ lp5521_write_program_memory(cl, LP5521_REG_R_PROG_MEM,
+ ptn->r, ptn->size_r);
+ lp5521_write_program_memory(cl, LP5521_REG_G_PROG_MEM,
+ ptn->g, ptn->size_g);
+ lp5521_write_program_memory(cl, LP5521_REG_B_PROG_MEM,
+ ptn->b, ptn->size_b);
+
+ lp5521_write(cl, LP5521_REG_OP_MODE, LP5521_CMD_RUN);
+ usleep_range(1000, 2000);
+ lp5521_write(cl, LP5521_REG_ENABLE,
+ LP5521_MASTER_ENABLE | LP5521_LOGARITHMIC_PWM |
+ LP5521_EXEC_RUN);
+ }
+}
+
+static ssize_t store_led_pattern(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
+{
+ struct lp5521_chip *chip = i2c_get_clientdata(to_i2c_client(dev));
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 16, &val);
+ if (ret)
+ return ret;
+
+ lp5521_run_led_pattern(val, chip);
+
+ return len;
+}
+
/* led class device attributes */
static DEVICE_ATTR(led_current, S_IRUGO | S_IWUSR, show_current, store_current);
static DEVICE_ATTR(max_current, S_IRUGO , show_max_current, NULL);
@@ -550,6 +647,7 @@
static DEVICE_ATTR(engine2_load, S_IWUSR, NULL, store_engine2_load);
static DEVICE_ATTR(engine3_load, S_IWUSR, NULL, store_engine3_load);
static DEVICE_ATTR(selftest, S_IRUGO, lp5521_selftest, NULL);
+static DEVICE_ATTR(led_pattern, S_IWUSR, NULL, store_led_pattern);
static struct attribute *lp5521_attributes[] = {
&dev_attr_engine1_mode.attr,
@@ -559,6 +657,7 @@
&dev_attr_engine1_load.attr,
&dev_attr_engine2_load.attr,
&dev_attr_engine3_load.attr,
+ &dev_attr_led_pattern.attr,
NULL
};
@@ -761,6 +860,7 @@
struct lp5521_chip *chip = i2c_get_clientdata(client);
int i;
+ lp5521_run_led_pattern(PATTERN_OFF, chip);
lp5521_unregister_sysfs(client);
for (i = 0; i < chip->num_leds; i++) {