drm/i915: Use the real FDI frequency for determining b/w
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index d0b4b23..fbf58e0 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2398,6 +2398,7 @@
#define RR_HW_HIGH_POWER_FRAMES_MASK 0xff00
#define FDI_PLL_BIOS_0 0x46000
+#define FDI_PLL_FB_CLOCK_MASK 0xff
#define FDI_PLL_BIOS_1 0x46004
#define FDI_PLL_BIOS_2 0x46008
#define DISPLAY_PORT_PLL_BIOS_0 0x4600c
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index df410e4..5279b0c 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -342,6 +342,13 @@
intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock);
+static inline u32 /* units of 100MHz */
+intel_fdi_link_freq(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ return (I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK) + 2;
+}
+
static const intel_limit_t intel_limits_i8xx_dvo = {
.dot = { .min = I8XX_DOT_MIN, .max = I8XX_DOT_MAX },
.vco = { .min = I8XX_VCO_MIN, .max = I8XX_VCO_MAX },
@@ -3767,7 +3774,15 @@
target_clock = mode->clock;
else
target_clock = adjusted_mode->clock;
- link_bw = 270000;
+
+ /* FDI is a binary signal running at ~2.7GHz, encoding
+ * each output octet as 10 bits. The actual frequency
+ * is stored as a divider into a 100MHz clock, and the
+ * mode pixel clock is stored in units of 1KHz.
+ * Hence the bw of each lane in terms of the mode signal
+ * is:
+ */
+ link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10;
}
/* determine panel color depth */
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 1ada684..6c6b897 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -49,6 +49,9 @@
#define wait_for(COND, MS) _wait_for(COND, MS, 1)
#define wait_for_atomic(COND, MS) _wait_for(COND, MS, 0)
+#define KHz(x) (1000*x)
+#define MHz(x) KHz(1000*x)
+
/*
* Display related stuff
*/