V4L/DVB (12138): em28xx: add support for Silvercrest Webcam
This webcam uses a em2710 chipset, that identifies itself as em2820,
plus a mt9v011 sensor, and a DY-301P lens.
It needs a few different initializations than a normal em28xx device.
Thanks to Hans de Goede <hdegoede@redhat.com> and Douglas Landgraf
<dougsland@redhat.com> for providing the acces for the webcam during
this weekend, I could make a patch for it while returning back from
FISL/Fudcom LATAM 2009.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index 16a5af3..6524b49 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -8,6 +8,8 @@
select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TVP5150 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
+ select VIDEO_MT9V011 if VIDEO_HELPER_CHIPS_AUTO
+
---help---
This is a video4linux driver for Empia 28xx based TV cards.
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index c43fdb9..bd9b637 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -191,6 +191,13 @@
{EM28XX_R08_GPIO, 0xff, 0xff, 10},
{ -1, -1, -1, -1},
};
+
+static struct em28xx_reg_seq silvercrest_reg_seq[] = {
+ {EM28XX_R08_GPIO, 0xff, 0xff, 10},
+ {EM28XX_R08_GPIO, 0x01, 0xf7, 10},
+ { -1, -1, -1, -1},
+};
+
/*
* Board definitions
*/
@@ -438,6 +445,18 @@
.amux = EM28XX_AMUX_VIDEO,
} },
},
+ [EM2820_BOARD_SILVERCREST_WEBCAM] = {
+ .name = "Silvercrest Webcam 1.3mpix",
+ .tuner_type = TUNER_ABSENT,
+ .is_27xx = 1,
+ .decoder = EM28XX_MT9V011,
+ .input = { {
+ .type = EM28XX_VMUX_COMPOSITE1,
+ .vmux = 0,
+ .amux = EM28XX_AMUX_VIDEO,
+ .gpio = silvercrest_reg_seq,
+ } },
+ },
[EM2821_BOARD_SUPERCOMP_USB_2] = {
.name = "Supercomp USB 2.0 TV",
.valid = EM28XX_BOARD_NOT_VALIDATED,
@@ -1639,6 +1658,11 @@
I2C_CLIENT_END
};
+static unsigned short mt9v011_addrs[] = {
+ 0xba >> 1,
+ I2C_CLIENT_END
+};
+
static unsigned short msp3400_addrs[] = {
0x80 >> 1,
0x88 >> 1,
@@ -1706,7 +1730,10 @@
em28xx_info("chip ID is em2750\n");
break;
case CHIP_ID_EM2820:
- em28xx_info("chip ID is em2820\n");
+ if (dev->board.is_27xx)
+ em28xx_info("chip is em2710\n");
+ else
+ em28xx_info("chip ID is em2820\n");
break;
case CHIP_ID_EM2840:
em28xx_info("chip ID is em2840\n");
@@ -2158,6 +2185,10 @@
before probing the i2c bus. */
em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break;
+ case EM2820_BOARD_SILVERCREST_WEBCAM:
+ /* FIXME: need to document the registers bellow */
+ em28xx_write_reg(dev, 0x0d, 0x42);
+ em28xx_write_reg(dev, 0x13, 0x08);
}
if (dev->board.has_snapshot_button)
@@ -2189,6 +2220,10 @@
v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
"tvp5150", "tvp5150", tvp5150_addrs);
+ if (dev->board.decoder == EM28XX_MT9V011)
+ v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
+ "mt9v011", "mt9v011", mt9v011_addrs);
+
if (dev->board.adecoder == EM28XX_TVAUDIO)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
"tvaudio", "tvaudio", dev->board.tvaudio_addr);
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index c8d7ce8..dda2721 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -648,17 +648,29 @@
int em28xx_set_outfmt(struct em28xx *dev)
{
int ret;
+ int vinmode, vinctl, outfmt;
+
+ outfmt = dev->format->reg;
+
+ if (dev->board.is_27xx) {
+ vinmode = 0x0d;
+ vinctl = 0x00;
+ outfmt = 0x24;
+ } else {
+ vinmode = 0x10;
+ vinctl = 0x11;
+ }
ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT,
- dev->format->reg | 0x20, 0x3f);
+ outfmt | 0x20, 0xff);
+ if (ret < 0)
+ return ret;
+
+ ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, vinmode);
if (ret < 0)
return ret;
- ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, 0x10);
- if (ret < 0)
- return ret;
-
- return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, 0x11);
+ return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctl);
}
static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
@@ -695,13 +707,19 @@
{
u8 mode;
/* the em2800 scaler only supports scaling down to 50% */
- if (dev->board.is_em2800)
+
+ if (dev->board.is_27xx) {
+ /* FIXME: Don't use the scaler yet */
+ mode = 0;
+ } else if (dev->board.is_em2800) {
mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00);
- else {
+ } else {
u8 buf[2];
+
buf[0] = h;
buf[1] = h >> 8;
em28xx_write_regs(dev, EM28XX_R30_HSCALELOW, (char *)buf, 2);
+
buf[0] = v;
buf[1] = v >> 8;
em28xx_write_regs(dev, EM28XX_R32_VSCALELOW, (char *)buf, 2);
@@ -720,8 +738,11 @@
height = norm_maxh(dev) >> 1;
em28xx_set_outfmt(dev);
+
+
em28xx_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2);
em28xx_capture_area_set(dev, 0, 0, width >> 2, height >> 2);
+
return em28xx_scaler_set(dev, dev->hscale, dev->vscale);
}
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index 813ce45..d90fef4 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -107,6 +107,7 @@
#define EM2860_BOARD_TERRATEC_AV350 68
#define EM2882_BOARD_KWORLD_ATSC_315U 69
#define EM2882_BOARD_EVGA_INDTUBE 70
+#define EM2820_BOARD_SILVERCREST_WEBCAM 71
/* Limits minimum and default number of buffers */
#define EM28XX_MIN_BUF 4
@@ -360,6 +361,7 @@
EM28XX_NODECODER,
EM28XX_TVP5150,
EM28XX_SAA711X,
+ EM28XX_MT9V011,
};
enum em28xx_adecoder {
@@ -388,6 +390,7 @@
unsigned int max_range_640_480:1;
unsigned int has_dvb:1;
unsigned int has_snapshot_button:1;
+ unsigned int is_27xx:1;
unsigned int valid:1;
unsigned char xclk, i2c_speed;