drivers/net/wireless/orinoco_cs.c - kernel/msm - Gitiles

 /* orinoco_cs.c (formerly known as dldwd_cs.c)
  *
  * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
  * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
  * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
  * It should also be usable on various Prism II based cards such as the
  * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
  * cards such as the 3Com AirConnect and Ericsson WLAN.
  *
  * Copyright notice & release notes in file orinoco.c
  */

 #define DRIVER_NAME "orinoco_cs"
 #define PFX DRIVER_NAME ": "

 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <pcmcia/cs_types.h>
 #include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>

 #include "orinoco.h"

 /********************************************************************/
 /* Module stuff							    */
 /********************************************************************/

 MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
 MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards");
 MODULE_LICENSE("Dual MPL/GPL");

 /* Module parameters */

 /* Some D-Link cards have buggy CIS. They do work at 5v properly, but
  * don't have any CIS entry for it. This workaround it... */
 static int ignore_cis_vcc; /* = 0 */
 module_param(ignore_cis_vcc, int, 0);
 MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");

 /********************************************************************/
 /* Data structures						    */
 /********************************************************************/

 /* PCMCIA specific device information (goes in the card field of
  * struct orinoco_private */
 struct orinoco_pccard {
 	struct pcmcia_device	*p_dev;
 	dev_node_t node;

 	/* Used to handle hard reset */
 	/* yuck, we need this hack to work around the insanity of the
          * PCMCIA layer */
 	unsigned long hard_reset_in_progress;
 };


 /********************************************************************/
 /* Function prototypes						    */
 /********************************************************************/

 static int orinoco_cs_config(struct pcmcia_device *link);
 static void orinoco_cs_release(struct pcmcia_device *link);
 static void orinoco_cs_detach(struct pcmcia_device *p_dev);

 /********************************************************************/
 /* Device methods     						    */
 /********************************************************************/

 static int
 orinoco_cs_hard_reset(struct orinoco_private *priv)
 {
 	struct orinoco_pccard *card = priv->card;
 	struct pcmcia_device *link = card->p_dev;
 	int err;

 	/* We need atomic ops here, because we're not holding the lock */
 	set_bit(0, &card->hard_reset_in_progress);

 	err = pcmcia_reset_card(link->socket);
 	if (err)
 		return err;

 	msleep(100);
 	clear_bit(0, &card->hard_reset_in_progress);

 	return 0;
 }

 /********************************************************************/
 /* PCMCIA stuff     						    */
 /********************************************************************/

 /*
  * This creates an "instance" of the driver, allocating local data
  * structures for one device.  The device is registered with Card
  * Services.
  *
  * The dev_link structure is initialized, but we don't actually
  * configure the card at this point -- we wait until we receive a card
  * insertion event.  */
 static int
 orinoco_cs_probe(struct pcmcia_device *link)
 {
 	struct net_device *dev;
 	struct orinoco_private *priv;
 	struct orinoco_pccard *card;

 	dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
 			       orinoco_cs_hard_reset, NULL);
 	if (! dev)
 		return -ENOMEM;
 	priv = netdev_priv(dev);
 	card = priv->card;

 	/* Link both structures together */
 	card->p_dev = link;
 	link->priv = dev;

 	/* Interrupt setup */
 	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
 	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
 	link->irq.Handler = orinoco_interrupt;
 	link->irq.Instance = dev;

 	/* General socket configuration defaults can go here.  In this
 	 * client, we assume very little, and rely on the CIS for
 	 * almost everything.  In most clients, many details (i.e.,
 	 * number, sizes, and attributes of IO windows) are fixed by
 	 * the nature of the device, and can be hard-wired here. */
 	link->conf.Attributes = 0;
 	link->conf.IntType = INT_MEMORY_AND_IO;

 	return orinoco_cs_config(link);
 }				/* orinoco_cs_attach */

 /*
  * This deletes a driver "instance".  The device is de-registered with
  * Card Services.  If it has been released, all local data structures
  * are freed.  Otherwise, the structures will be freed when the device
  * is released.
  */
 static void orinoco_cs_detach(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;

 	if (link->dev_node)
 		unregister_netdev(dev);

 	orinoco_cs_release(link);

 	free_orinocodev(dev);
 }				/* orinoco_cs_detach */

 /*
  * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
  * event is received, to configure the PCMCIA socket, and to make the
  * device available to the system.
  */

 #define CS_CHECK(fn, ret) do { \
 		last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
 	} while (0)

 static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 				   cistpl_cftable_entry_t *cfg,
 				   cistpl_cftable_entry_t *dflt,
 				   unsigned int vcc,
 				   void *priv_data)
 {
 	if (cfg->index == 0)
 		goto next_entry;

 	/* Use power settings for Vcc and Vpp if present */
 	/* Note that the CIS values need to be rescaled */
 	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
 		if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
 			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
 	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
 		if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
 			DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n",  vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
 	}

 	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp =
 			cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp =
 			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;

 	/* Do we need to allocate an interrupt? */
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;

 	/* IO window settings */
 	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
 	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
 		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 		if (!(io->flags & CISTPL_IO_8BIT))
 			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
 		if (!(io->flags & CISTPL_IO_16BIT))
 			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
 		p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
 		p_dev->io.BasePort1 = io->win[0].base;
 		p_dev->io.NumPorts1 = io->win[0].len;
 		if (io->nwin > 1) {
 			p_dev->io.Attributes2 = p_dev->io.Attributes1;
 			p_dev->io.BasePort2 = io->win[1].base;
 			p_dev->io.NumPorts2 = io->win[1].len;
 		}

 		/* This reserves IO space but doesn't actually enable it */
 		if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
 			goto next_entry;
 	}
 	return 0;

 next_entry:
 	pcmcia_disable_device(p_dev);
 	return -ENODEV;
 };

 static int
 orinoco_cs_config(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;
 	struct orinoco_private *priv = netdev_priv(dev);
 	struct orinoco_pccard *card = priv->card;
 	hermes_t *hw = &priv->hw;
 	int last_fn, last_ret;
 	void __iomem *mem;

 	/*
 	 * In this loop, we scan the CIS for configuration table
 	 * entries, each of which describes a valid card
 	 * configuration, including voltage, IO window, memory window,
 	 * and interrupt settings.
 	 *
 	 * We make no assumptions about the card to be configured: we
 	 * use just the information available in the CIS.  In an ideal
 	 * world, this would work for any PCMCIA card, but it requires
 	 * a complete and accurate CIS.  In practice, a driver usually
 	 * "knows" most of these things without consulting the CIS,
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
 	last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
 	if (last_ret) {
 		if (!ignore_cis_vcc)
 			printk(KERN_ERR PFX "GetNextTuple(): No matching "
 			       "CIS configuration.  Maybe you need the "
 			       "ignore_cis_vcc=1 parameter.\n");
 		cs_error(link, RequestIO, last_ret);
 		goto failed;
 	}

 	/*
 	 * Allocate an interrupt line.  Note that this does not assign
 	 * a handler to the interrupt, unless the 'Handler' member of
 	 * the irq structure is initialized.
 	 */
 	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));

 	/* We initialize the hermes structure before completing PCMCIA
 	 * configuration just in case the interrupt handler gets
 	 * called. */
 	mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
 	if (!mem)
 		goto cs_failed;

 	hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);

 	/*
 	 * This actually configures the PCMCIA socket -- setting up
 	 * the I/O windows and the interrupt mapping, and putting the
 	 * card and host interface into "Memory and IO" mode.
 	 */
 	CS_CHECK(RequestConfiguration,
 		 pcmcia_request_configuration(link, &link->conf));

 	/* Ok, we have the configuration, prepare to register the netdev */
 	dev->base_addr = link->io.BasePort1;
 	dev->irq = link->irq.AssignedIRQ;
 	card->node.major = card->node.minor = 0;

 	SET_NETDEV_DEV(dev, &handle_to_dev(link));
 	/* Tell the stack we exist */
 	if (register_netdev(dev) != 0) {
 		printk(KERN_ERR PFX "register_netdev() failed\n");
 		goto failed;
 	}

 	/* At this point, the dev_node_t structure(s) needs to be
 	 * initialized and arranged in a linked list at link->dev_node. */
 	strcpy(card->node.dev_name, dev->name);
 	link->dev_node = &card->node; /* link->dev_node being non-NULL is also
                                     used to indicate that the
                                     net_device has been registered */

 	/* Finally, report what we've done */
 	printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
 	       "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
 	       link->irq.AssignedIRQ, link->io.BasePort1,
 	       link->io.BasePort1 + link->io.NumPorts1 - 1);
 	return 0;

  cs_failed:
 	cs_error(link, last_fn, last_ret);

  failed:
 	orinoco_cs_release(link);
 	return -ENODEV;
 }				/* orinoco_cs_config */

 /*
  * After a card is removed, orinoco_cs_release() will unregister the
  * device, and release the PCMCIA configuration.  If the device is
  * still open, this will be postponed until it is closed.
  */
 static void
 orinoco_cs_release(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;
 	struct orinoco_private *priv = netdev_priv(dev);
 	unsigned long flags;

 	/* We're committed to taking the device away now, so mark the
 	 * hardware as unavailable */
 	spin_lock_irqsave(&priv->lock, flags);
 	priv->hw_unavailable++;
 	spin_unlock_irqrestore(&priv->lock, flags);

 	pcmcia_disable_device(link);
 	if (priv->hw.iobase)
 		ioport_unmap(priv->hw.iobase);
 }				/* orinoco_cs_release */

 static int orinoco_cs_suspend(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;
 	struct orinoco_private *priv = netdev_priv(dev);
 	struct orinoco_pccard *card = priv->card;
 	int err = 0;
 	unsigned long flags;

 	/* This is probably racy, but I can't think of
 	   a better way, short of rewriting the PCMCIA
 	   layer to not suck :-( */
 	if (! test_bit(0, &card->hard_reset_in_progress)) {
 		spin_lock_irqsave(&priv->lock, flags);

 		err = __orinoco_down(dev);
 		if (err)
 			printk(KERN_WARNING "%s: Error %d downing interface\n",
 			       dev->name, err);

 		netif_device_detach(dev);
 		priv->hw_unavailable++;

 		spin_unlock_irqrestore(&priv->lock, flags);
 	}

 	return 0;
 }

 static int orinoco_cs_resume(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;
 	struct orinoco_private *priv = netdev_priv(dev);
 	struct orinoco_pccard *card = priv->card;
 	int err = 0;
 	unsigned long flags;

 	if (! test_bit(0, &card->hard_reset_in_progress)) {
 		err = orinoco_reinit_firmware(dev);
 		if (err) {
 			printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
 			       dev->name, err);
 			return -EIO;
 		}

 		spin_lock_irqsave(&priv->lock, flags);

 		netif_device_attach(dev);
 		priv->hw_unavailable--;

 		if (priv->open && ! priv->hw_unavailable) {
 			err = __orinoco_up(dev);
 			if (err)
 				printk(KERN_ERR "%s: Error %d restarting card\n",
 				       dev->name, err);
 		}

 		spin_unlock_irqrestore(&priv->lock, flags);
 	}

 	return err;
 }


 /********************************************************************/
 /* Module initialization					    */
 /********************************************************************/

 /* Can't be declared "const" or the whole __initdata section will
  * become const */
 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
 	" (David Gibson <hermes@gibson.dropbear.id.au>, "
 	"Pavel Roskin <proski@gnu.org>, et al)";

 static struct pcmcia_device_id orinoco_cs_ids[] = {
 	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
 	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
 	PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
 	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
 	PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
 	PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
 	PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
 	PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
 	PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
 	PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
 	PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
 	PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
 	PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
 	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
 	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
 	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
 	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
 	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
 	PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
 	PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
 	PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
 	PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
 	PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
 	PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
 	PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
 	PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
 	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
 	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
 	PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
 	PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
 	PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
 	PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
 	PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
 	PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
 	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
 	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
 	PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
 	PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
 	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
 	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
 	PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
 	PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
 	PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
 	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
 	PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
 	PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
 	PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
 	PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
 	PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
 	PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
 	PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
 	PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
 	PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
 	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
 	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
 	PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
 	PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
 	PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
 	PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
 	PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
 	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
 	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
 	PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
 	PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
 	PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
 	PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
 	PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
 	PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
 	PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
 	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
 	PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
 	PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
 	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
 	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
 	PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
 	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
 	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
 	PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
 	PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
 	PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
 	PCMCIA_DEVICE_NULL,
 };
 MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);

 static struct pcmcia_driver orinoco_driver = {
 	.owner		= THIS_MODULE,
 	.drv		= {
 		.name	= DRIVER_NAME,
 	},
 	.probe		= orinoco_cs_probe,
 	.remove		= orinoco_cs_detach,
 	.id_table       = orinoco_cs_ids,
 	.suspend	= orinoco_cs_suspend,
 	.resume		= orinoco_cs_resume,
 };

 static int __init
 init_orinoco_cs(void)
 {
 	printk(KERN_DEBUG "%s\n", version);

 	return pcmcia_register_driver(&orinoco_driver);
 }

 static void __exit
 exit_orinoco_cs(void)
 {
 	pcmcia_unregister_driver(&orinoco_driver);
 }

 module_init(init_orinoco_cs);
 module_exit(exit_orinoco_cs);
	/* orinoco_cs.c (formerly known as dldwd_cs.c)
	*
	* A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
	* as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
	* EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
	* It should also be usable on various Prism II based cards such as the
	* Linksys, D-Link and Farallon Skyline. It should also work on Symbol
	* cards such as the 3Com AirConnect and Ericsson WLAN.
	*
	* Copyright notice & release notes in file orinoco.c
	*/

	#define DRIVER_NAME "orinoco_cs"
	#define PFX DRIVER_NAME ": "

	#include <linux/module.h>
	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/delay.h>
	#include <pcmcia/cs_types.h>
	#include <pcmcia/cs.h>
	#include <pcmcia/cistpl.h>
	#include <pcmcia/cisreg.h>
	#include <pcmcia/ds.h>

	#include "orinoco.h"

	/********************************************************************/
	/* Module stuff */
	/********************************************************************/

	MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
	MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards");
	MODULE_LICENSE("Dual MPL/GPL");

	/* Module parameters */

	/* Some D-Link cards have buggy CIS. They do work at 5v properly, but
	* don't have any CIS entry for it. This workaround it... */
	static int ignore_cis_vcc; /* = 0 */
	module_param(ignore_cis_vcc, int, 0);
	MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");

	/********************************************************************/
	/* Data structures */
	/********************************************************************/

	/* PCMCIA specific device information (goes in the card field of
	* struct orinoco_private */
	struct orinoco_pccard {
	struct pcmcia_device *p_dev;
	dev_node_t node;

	/* Used to handle hard reset */
	/* yuck, we need this hack to work around the insanity of the
	* PCMCIA layer */
	unsigned long hard_reset_in_progress;
	};


	/********************************************************************/
	/* Function prototypes */
	/********************************************************************/

	static int orinoco_cs_config(struct pcmcia_device *link);
	static void orinoco_cs_release(struct pcmcia_device *link);
	static void orinoco_cs_detach(struct pcmcia_device *p_dev);

	/********************************************************************/
	/* Device methods */
	/********************************************************************/

	static int
	orinoco_cs_hard_reset(struct orinoco_private *priv)
	{
	struct orinoco_pccard *card = priv->card;
	struct pcmcia_device *link = card->p_dev;
	int err;

	/* We need atomic ops here, because we're not holding the lock */
	set_bit(0, &card->hard_reset_in_progress);

	err = pcmcia_reset_card(link->socket);
	if (err)
	return err;

	msleep(100);
	clear_bit(0, &card->hard_reset_in_progress);

	return 0;
	}

	/********************************************************************/
	/* PCMCIA stuff */
	/********************************************************************/

	/*
	* This creates an "instance" of the driver, allocating local data
	* structures for one device. The device is registered with Card
	* Services.
	*
	* The dev_link structure is initialized, but we don't actually
	* configure the card at this point -- we wait until we receive a card
	* insertion event. */
	static int
	orinoco_cs_probe(struct pcmcia_device *link)
	{
	struct net_device *dev;
	struct orinoco_private *priv;
	struct orinoco_pccard *card;

	dev = alloc_orinocodev(sizeof(*card), &handle_to_dev(link),
	orinoco_cs_hard_reset, NULL);
	if (! dev)
	return -ENOMEM;
	priv = netdev_priv(dev);
	card = priv->card;

	/* Link both structures together */
	card->p_dev = link;
	link->priv = dev;

	/* Interrupt setup */
	link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING \| IRQ_HANDLE_PRESENT;
	link->irq.IRQInfo1 = IRQ_LEVEL_ID;
	link->irq.Handler = orinoco_interrupt;
	link->irq.Instance = dev;

	/* General socket configuration defaults can go here. In this
	* client, we assume very little, and rely on the CIS for
	* almost everything. In most clients, many details (i.e.,
	* number, sizes, and attributes of IO windows) are fixed by
	* the nature of the device, and can be hard-wired here. */
	link->conf.Attributes = 0;
	link->conf.IntType = INT_MEMORY_AND_IO;

	return orinoco_cs_config(link);
	} /* orinoco_cs_attach */

	/*
	* This deletes a driver "instance". The device is de-registered with
	* Card Services. If it has been released, all local data structures
	* are freed. Otherwise, the structures will be freed when the device
	* is released.
	*/
	static void orinoco_cs_detach(struct pcmcia_device *link)
	{
	struct net_device *dev = link->priv;

	if (link->dev_node)
	unregister_netdev(dev);

	orinoco_cs_release(link);

	free_orinocodev(dev);
	} /* orinoco_cs_detach */

	/*
	* orinoco_cs_config() is scheduled to run after a CARD_INSERTION
	* event is received, to configure the PCMCIA socket, and to make the
	* device available to the system.
	*/

	#define CS_CHECK(fn, ret) do { \
	last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
	} while (0)

	static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
	cistpl_cftable_entry_t *cfg,
	cistpl_cftable_entry_t *dflt,
	unsigned int vcc,
	void *priv_data)
	{
	if (cfg->index == 0)
	goto next_entry;

	/* Use power settings for Vcc and Vpp if present */
	/* Note that the CIS values need to be rescaled */
	if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
	if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
	DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
	if (!ignore_cis_vcc)
	goto next_entry;
	}
	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
	if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
	DEBUG(2, "spectrum_cs_config: Vcc mismatch (vcc = %d, CIS = %d)\n", vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
	if (!ignore_cis_vcc)
	goto next_entry;
	}
	}

	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
	p_dev->conf.Vpp =
	cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
	p_dev->conf.Vpp =
	dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;

	/* Do we need to allocate an interrupt? */
	p_dev->conf.Attributes \|= CONF_ENABLE_IRQ;

	/* IO window settings */
	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
	if ((cfg->io.nwin > 0) \|\| (dflt->io.nwin > 0)) {
	cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
	if (!(io->flags & CISTPL_IO_8BIT))
	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
	if (!(io->flags & CISTPL_IO_16BIT))
	p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
	p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
	p_dev->io.BasePort1 = io->win[0].base;
	p_dev->io.NumPorts1 = io->win[0].len;
	if (io->nwin > 1) {
	p_dev->io.Attributes2 = p_dev->io.Attributes1;
	p_dev->io.BasePort2 = io->win[1].base;
	p_dev->io.NumPorts2 = io->win[1].len;
	}

	/* This reserves IO space but doesn't actually enable it */
	if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
	goto next_entry;
	}
	return 0;

	next_entry:
	pcmcia_disable_device(p_dev);
	return -ENODEV;
	};

	static int
	orinoco_cs_config(struct pcmcia_device *link)
	{
	struct net_device *dev = link->priv;
	struct orinoco_private *priv = netdev_priv(dev);
	struct orinoco_pccard *card = priv->card;
	hermes_t *hw = &priv->hw;
	int last_fn, last_ret;
	void __iomem *mem;

	/*
	* In this loop, we scan the CIS for configuration table
	* entries, each of which describes a valid card
	* configuration, including voltage, IO window, memory window,
	* and interrupt settings.
	*
	* We make no assumptions about the card to be configured: we
	* use just the information available in the CIS. In an ideal
	* world, this would work for any PCMCIA card, but it requires
	* a complete and accurate CIS. In practice, a driver usually
	* "knows" most of these things without consulting the CIS,
	* and most client drivers will only use the CIS to fill in
	* implementation-defined details.
	*/
	last_ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL);
	if (last_ret) {
	if (!ignore_cis_vcc)
	printk(KERN_ERR PFX "GetNextTuple(): No matching "
	"CIS configuration. Maybe you need the "
	"ignore_cis_vcc=1 parameter.\n");
	cs_error(link, RequestIO, last_ret);
	goto failed;
	}

	/*
	* Allocate an interrupt line. Note that this does not assign
	* a handler to the interrupt, unless the 'Handler' member of
	* the irq structure is initialized.
	*/
	CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));

	/* We initialize the hermes structure before completing PCMCIA
	* configuration just in case the interrupt handler gets
	* called. */
	mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
	if (!mem)
	goto cs_failed;

	hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);

	/*
	* This actually configures the PCMCIA socket -- setting up
	* the I/O windows and the interrupt mapping, and putting the
	* card and host interface into "Memory and IO" mode.
	*/
	CS_CHECK(RequestConfiguration,
	pcmcia_request_configuration(link, &link->conf));

	/* Ok, we have the configuration, prepare to register the netdev */
	dev->base_addr = link->io.BasePort1;
	dev->irq = link->irq.AssignedIRQ;
	card->node.major = card->node.minor = 0;

	SET_NETDEV_DEV(dev, &handle_to_dev(link));
	/* Tell the stack we exist */
	if (register_netdev(dev) != 0) {
	printk(KERN_ERR PFX "register_netdev() failed\n");
	goto failed;
	}

	/* At this point, the dev_node_t structure(s) needs to be
	* initialized and arranged in a linked list at link->dev_node. */
	strcpy(card->node.dev_name, dev->name);
	link->dev_node = &card->node; /* link->dev_node being non-NULL is also
	used to indicate that the
	net_device has been registered */

	/* Finally, report what we've done */
	printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
	"0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
	link->irq.AssignedIRQ, link->io.BasePort1,
	link->io.BasePort1 + link->io.NumPorts1 - 1);
	return 0;

	cs_failed:
	cs_error(link, last_fn, last_ret);

	failed:
	orinoco_cs_release(link);
	return -ENODEV;
	} /* orinoco_cs_config */

	/*
	* After a card is removed, orinoco_cs_release() will unregister the
	* device, and release the PCMCIA configuration. If the device is
	* still open, this will be postponed until it is closed.
	*/
	static void
	orinoco_cs_release(struct pcmcia_device *link)
	{
	struct net_device *dev = link->priv;
	struct orinoco_private *priv = netdev_priv(dev);
	unsigned long flags;

	/* We're committed to taking the device away now, so mark the
	* hardware as unavailable */
	spin_lock_irqsave(&priv->lock, flags);
	priv->hw_unavailable++;
	spin_unlock_irqrestore(&priv->lock, flags);

	pcmcia_disable_device(link);
	if (priv->hw.iobase)
	ioport_unmap(priv->hw.iobase);
	} /* orinoco_cs_release */

	static int orinoco_cs_suspend(struct pcmcia_device *link)
	{
	struct net_device *dev = link->priv;
	struct orinoco_private *priv = netdev_priv(dev);
	struct orinoco_pccard *card = priv->card;
	int err = 0;
	unsigned long flags;

	/* This is probably racy, but I can't think of
	a better way, short of rewriting the PCMCIA
	layer to not suck :-( */
	if (! test_bit(0, &card->hard_reset_in_progress)) {
	spin_lock_irqsave(&priv->lock, flags);

	err = __orinoco_down(dev);
	if (err)
	printk(KERN_WARNING "%s: Error %d downing interface\n",
	dev->name, err);

	netif_device_detach(dev);
	priv->hw_unavailable++;

	spin_unlock_irqrestore(&priv->lock, flags);
	}

	return 0;
	}

	static int orinoco_cs_resume(struct pcmcia_device *link)
	{
	struct net_device *dev = link->priv;
	struct orinoco_private *priv = netdev_priv(dev);
	struct orinoco_pccard *card = priv->card;
	int err = 0;
	unsigned long flags;

	if (! test_bit(0, &card->hard_reset_in_progress)) {
	err = orinoco_reinit_firmware(dev);
	if (err) {
	printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
	dev->name, err);
	return -EIO;
	}

	spin_lock_irqsave(&priv->lock, flags);

	netif_device_attach(dev);
	priv->hw_unavailable--;

	if (priv->open && ! priv->hw_unavailable) {
	err = __orinoco_up(dev);
	if (err)
	printk(KERN_ERR "%s: Error %d restarting card\n",
	dev->name, err);
	}

	spin_unlock_irqrestore(&priv->lock, flags);
	}

	return err;
	}


	/********************************************************************/
	/* Module initialization */
	/********************************************************************/

	/* Can't be declared "const" or the whole __initdata section will
	* become const */
	static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
	" (David Gibson <hermes@gibson.dropbear.id.au>, "
	"Pavel Roskin <proski@gnu.org>, et al)";

	static struct pcmcia_device_id orinoco_cs_ids[] = {
	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100), /* SonicWALL Long Range Wireless Card */
	PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300), /* Sohoware NCP110, Philips 802.11b */
	PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0002), /* AnyPoint(TM) Wireless II PC Card */
	PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */
	PCMCIA_DEVICE_MANF_CARD(0x0126, 0x8000), /* PROXIM RangeLAN-DS/LAN PC CARD */
	PCMCIA_DEVICE_MANF_CARD(0x0138, 0x0002), /* Compaq WL100 11 Mbps Wireless Adapter */
	PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */
	PCMCIA_DEVICE_MANF_CARD(0x016b, 0x0001), /* Ericsson WLAN Card C11 */
	PCMCIA_DEVICE_MANF_CARD(0x01eb, 0x080a), /* Nortel Networks eMobility 802.11 Wireless Adapter */
	PCMCIA_DEVICE_MANF_CARD(0x01ff, 0x0008), /* Intermec MobileLAN 11Mbps 802.11b WLAN Card */
	PCMCIA_DEVICE_MANF_CARD(0x0250, 0x0002), /* Samsung SWL2000-N 11Mb/s WLAN Card */
	PCMCIA_DEVICE_MANF_CARD(0x0261, 0x0002), /* AirWay 802.11 Adapter (PCMCIA) */
	PCMCIA_DEVICE_MANF_CARD(0x0268, 0x0001), /* ARtem Onair */
	PCMCIA_DEVICE_MANF_CARD(0x026f, 0x0305), /* Buffalo WLI-PCM-S11 */
	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1612), /* Linksys WPC11 Version 2.5 */
	PCMCIA_DEVICE_MANF_CARD(0x0274, 0x1613), /* Linksys WPC11 Version 3 */
	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0002), /* Compaq HNW-100 11 Mbps Wireless Adapter */
	PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
	PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
	PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
	PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
	PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
	PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
	PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
	PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
	PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
	PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
	PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
	PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
	PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
	PCMCIA_DEVICE_PROD_ID12("Addtron", "AWP-100 Wireless PCMCIA", 0xe6ec52ce, 0x08649af2),
	PCMCIA_DEVICE_PROD_ID123("AIRVAST", "IEEE 802.11b Wireless PCMCIA Card", "HFA3863", 0xea569531, 0x4bcb9645, 0x355cb092),
	PCMCIA_DEVICE_PROD_ID12("Allied Telesyn", "AT-WCL452 Wireless PCMCIA Radio", 0x5cd01705, 0x4271660f),
	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11b_PC_CARD_25", 0x78fc06ee, 0xdb9aa842),
	PCMCIA_DEVICE_PROD_ID12("ASUS", "802_11B_CF_CARD_25", 0x78fc06ee, 0x45a50c1e),
	PCMCIA_DEVICE_PROD_ID12("Avaya Communication", "Avaya Wireless PC Card", 0xd8a43b78, 0x0d341169),
	PCMCIA_DEVICE_PROD_ID12("BENQ", "AWL100 PCMCIA ADAPTER", 0x35dadc74, 0x01f7fedb),
	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-PCM-L11G", 0x2decece3, 0xf57ca4b3),
	PCMCIA_DEVICE_PROD_ID12("BUFFALO", "WLI-CF-S11G", 0x2decece3, 0x82067c18),
	PCMCIA_DEVICE_PROD_ID12("Cabletron", "RoamAbout 802.11 DS", 0x32d445f5, 0xedeffd90),
	PCMCIA_DEVICE_PROD_ID12("Compaq", "WL200_11Mbps_Wireless_PCI_Card", 0x54f7c49c, 0x15a75e5b),
	PCMCIA_DEVICE_PROD_ID123("corega", "WL PCCL-11", "ISL37300P", 0x0a21501a, 0x59868926, 0xc9049a39),
	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCC-11", 0x5261440f, 0xa6405584),
	PCMCIA_DEVICE_PROD_ID12("corega K.K.", "Wireless LAN PCCA-11", 0x5261440f, 0xdf6115f9),
	PCMCIA_DEVICE_PROD_ID12("corega_K.K.", "Wireless_LAN_PCCB-11", 0x29e33311, 0xee7a27ae),
	PCMCIA_DEVICE_PROD_ID12("D", "Link DRC-650 11Mbps WLAN Card", 0x71b18589, 0xf144e3ac),
	PCMCIA_DEVICE_PROD_ID12("D", "Link DWL-650 11Mbps WLAN Card", 0x71b18589, 0xb6f1b0ab),
	PCMCIA_DEVICE_PROD_ID12("D-Link Corporation", "D-Link DWL-650H 11Mbps WLAN Adapter", 0xef544d24, 0xcd8ea916),
	PCMCIA_DEVICE_PROD_ID12("Digital Data Communications", "WPC-0100", 0xfdd73470, 0xe0b6f146),
	PCMCIA_DEVICE_PROD_ID12("ELSA", "AirLancer MC-11", 0x4507a33a, 0xef54f0e3),
	PCMCIA_DEVICE_PROD_ID12("HyperLink", "Wireless PC Card 11Mbps", 0x56cc3f1a, 0x0bcf220c),
	PCMCIA_DEVICE_PROD_ID123("Instant Wireless ", " Network PC CARD", "Version 01.02", 0x11d901af, 0x6e9bd926, 0x4b74baa0),
	PCMCIA_DEVICE_PROD_ID12("Intel", "PRO/Wireless 2011 LAN PC Card", 0x816cc815, 0x07f58077),
	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "HFA384x/IEEE", 0x74c5e40d, 0xdb472a18),
	PCMCIA_DEVICE_PROD_ID12("INTERSIL", "I-GATE 11M PC Card / PC Card plus", 0x74c5e40d, 0x8304ff77),
	PCMCIA_DEVICE_PROD_ID12("Intersil", "PRISM 2_5 PCMCIA ADAPTER", 0x4b801a17, 0x6345a0bf),
	PCMCIA_DEVICE_PROD_ID123("Intersil", "PRISM Freedom PCMCIA Adapter", "ISL37100P", 0x4b801a17, 0xf222ec2d, 0x630d52b2),
	PCMCIA_DEVICE_PROD_ID12("LeArtery", "SYNCBYAIR 11Mbps Wireless LAN PC Card", 0x7e3b326a, 0x49893e92),
	PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card", 0x0733cc81, 0x0c52f395),
	PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/IEEE", 0x23eb9949, 0xc562e72a),
	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11", 0x481e0094, 0x7360e410),
	PCMCIA_DEVICE_PROD_ID12("MELCO", "WLI-PCM-L11G", 0x481e0094, 0xf57ca4b3),
	PCMCIA_DEVICE_PROD_ID12("Microsoft", "Wireless Notebook Adapter MN-520", 0x5961bf85, 0x6eec8c01),
	PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/IEEE", 0x24358cd4, 0xc562e72a),
	PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401 Wireless PC", "Card", 0xa37434e9, 0x9762e8f1),
	PCMCIA_DEVICE_PROD_ID12("NETGEAR MA401RA Wireless PC", "Card", 0x0306467f, 0x9762e8f1),
	PCMCIA_DEVICE_PROD_ID12("Nortel Networks", "emobility 802.11 Wireless LAN PC Card", 0x2d617ea0, 0x88cd5767),
	PCMCIA_DEVICE_PROD_ID12("OEM", "PRISM2 IEEE 802.11 PC-Card", 0xfea54c90, 0x48f2bdd6),
	PCMCIA_DEVICE_PROD_ID12("OTC", "Wireless AirEZY 2411-PCC WLAN Card", 0x4ac44287, 0x235a6bed),
	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "11M WLAN Card v2.5", "ISL37300P", 0x281f1c5d, 0x6e440487, 0xc9049a39),
	PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-CF110", 0x209f40ab, 0xd9715264),
	PCMCIA_DEVICE_PROD_ID12("PLANEX", "GeoWave/GW-NS110", 0x209f40ab, 0x46263178),
	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PC CARD HARMONY 80211B", 0xc6536a5e, 0x090c3cd9),
	PCMCIA_DEVICE_PROD_ID12("PROXIM", "LAN PCI CARD HARMONY 80211B", 0xc6536a5e, 0x9f494e26),
	PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "11Mbps WLAN Card", 0x43d74cb4, 0x579bd91b),
	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2532W-B EliteConnect Wireless Adapter", 0xc4f8b18b, 0x196bd757),
	PCMCIA_DEVICE_PROD_ID12("SMC", "SMC2632W", 0xc4f8b18b, 0x474a1f2a),
	PCMCIA_DEVICE_PROD_ID12("Symbol Technologies", "LA4111 Spectrum24 Wireless LAN PC Card", 0x3f02b4d6, 0x3663cb0e),
	PCMCIA_DEVICE_PROD_ID123("The Linksys Group, Inc.", "Instant Wireless Network PC Card", "ISL37300P", 0xa5f472c2, 0x590eb502, 0xc9049a39),
	PCMCIA_DEVICE_PROD_ID12("ZoomAir 11Mbps High", "Rate wireless Networking", 0x273fe3db, 0x32a1eaee),
	PCMCIA_DEVICE_NULL,
	};
	MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids);

	static struct pcmcia_driver orinoco_driver = {
	.owner = THIS_MODULE,
	.drv = {
	.name = DRIVER_NAME,
	},
	.probe = orinoco_cs_probe,
	.remove = orinoco_cs_detach,
	.id_table = orinoco_cs_ids,
	.suspend = orinoco_cs_suspend,
	.resume = orinoco_cs_resume,
	};

	static int __init
	init_orinoco_cs(void)
	{
	printk(KERN_DEBUG "%s\n", version);

	return pcmcia_register_driver(&orinoco_driver);
	}

	static void __exit
	exit_orinoco_cs(void)
	{
	pcmcia_unregister_driver(&orinoco_driver);
	}

	module_init(init_orinoco_cs);
	module_exit(exit_orinoco_cs);