mfd: add driver for sequencer serial port
TI's sequencer serial port (TI-SSP) is a jack-of-all-trades type of serial port
device. It has a built-in programmable execution engine that can be programmed
to operate as almost any serial bus (I2C, SPI, EasyScale, and others).
This patch adds a driver for this controller device. The driver does not
expose a user-land interface. Protocol drivers built on top of this layer are
expected to remain in-kernel.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index fd01836..0284c53 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -81,6 +81,17 @@
boards. MSP430 firmware manages resets and power sequencing,
inputs from buttons and the IR remote, LEDs, an RTC, and more.
+config MFD_TI_SSP
+ tristate "TI Sequencer Serial Port support"
+ depends on ARCH_DAVINCI_TNETV107X
+ select MFD_CORE
+ ---help---
+ Say Y here if you want support for the Sequencer Serial Port
+ in a Texas Instruments TNETV107X SoC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ti-ssp.
+
config HTC_EGPIO
bool "HTC EGPIO support"
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index a54e2c7..c56b6c7 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -14,6 +14,7 @@
obj-$(CONFIG_MFD_DAVINCI_VOICECODEC) += davinci_voicecodec.o
obj-$(CONFIG_MFD_DM355EVM_MSP) += dm355evm_msp.o
+obj-$(CONFIG_MFD_TI_SSP) += ti-ssp.o
obj-$(CONFIG_MFD_STMPE) += stmpe.o
obj-$(CONFIG_MFD_TC3589X) += tc3589x.o
diff --git a/drivers/mfd/ti-ssp.c b/drivers/mfd/ti-ssp.c
new file mode 100644
index 0000000..af9ab0e
--- /dev/null
+++ b/drivers/mfd/ti-ssp.c
@@ -0,0 +1,476 @@
+/*
+ * Sequencer Serial Port (SSP) driver for Texas Instruments' SoCs
+ *
+ * Copyright (C) 2010 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ti_ssp.h>
+
+/* Register Offsets */
+#define REG_REV 0x00
+#define REG_IOSEL_1 0x04
+#define REG_IOSEL_2 0x08
+#define REG_PREDIV 0x0c
+#define REG_INTR_ST 0x10
+#define REG_INTR_EN 0x14
+#define REG_TEST_CTRL 0x18
+
+/* Per port registers */
+#define PORT_CFG_2 0x00
+#define PORT_ADDR 0x04
+#define PORT_DATA 0x08
+#define PORT_CFG_1 0x0c
+#define PORT_STATE 0x10
+
+#define SSP_PORT_CONFIG_MASK (SSP_EARLY_DIN | SSP_DELAY_DOUT)
+#define SSP_PORT_CLKRATE_MASK 0x0f
+
+#define SSP_SEQRAM_WR_EN BIT(4)
+#define SSP_SEQRAM_RD_EN BIT(5)
+#define SSP_START BIT(15)
+#define SSP_BUSY BIT(10)
+#define SSP_PORT_ASL BIT(7)
+#define SSP_PORT_CFO1 BIT(6)
+
+#define SSP_PORT_SEQRAM_SIZE 32
+
+static const int ssp_port_base[] = {0x040, 0x080};
+static const int ssp_port_seqram[] = {0x100, 0x180};
+
+struct ti_ssp {
+ struct resource *res;
+ struct device *dev;
+ void __iomem *regs;
+ spinlock_t lock;
+ struct clk *clk;
+ int irq;
+ wait_queue_head_t wqh;
+
+ /*
+ * Some of the iosel2 register bits always read-back as 0, we need to
+ * remember these values so that we don't clobber previously set
+ * values.
+ */
+ u32 iosel2;
+};
+
+static inline struct ti_ssp *dev_to_ssp(struct device *dev)
+{
+ return dev_get_drvdata(dev->parent);
+}
+
+static inline int dev_to_port(struct device *dev)
+{
+ return to_platform_device(dev)->id;
+}
+
+/* Register Access Helpers, rmw() functions need to run locked */
+static inline u32 ssp_read(struct ti_ssp *ssp, int reg)
+{
+ return __raw_readl(ssp->regs + reg);
+}
+
+static inline void ssp_write(struct ti_ssp *ssp, int reg, u32 val)
+{
+ __raw_writel(val, ssp->regs + reg);
+}
+
+static inline void ssp_rmw(struct ti_ssp *ssp, int reg, u32 mask, u32 bits)
+{
+ ssp_write(ssp, reg, (ssp_read(ssp, reg) & ~mask) | bits);
+}
+
+static inline u32 ssp_port_read(struct ti_ssp *ssp, int port, int reg)
+{
+ return ssp_read(ssp, ssp_port_base[port] + reg);
+}
+
+static inline void ssp_port_write(struct ti_ssp *ssp, int port, int reg,
+ u32 val)
+{
+ ssp_write(ssp, ssp_port_base[port] + reg, val);
+}
+
+static inline void ssp_port_rmw(struct ti_ssp *ssp, int port, int reg,
+ u32 mask, u32 bits)
+{
+ ssp_rmw(ssp, ssp_port_base[port] + reg, mask, bits);
+}
+
+static inline void ssp_port_clr_bits(struct ti_ssp *ssp, int port, int reg,
+ u32 bits)
+{
+ ssp_port_rmw(ssp, port, reg, bits, 0);
+}
+
+static inline void ssp_port_set_bits(struct ti_ssp *ssp, int port, int reg,
+ u32 bits)
+{
+ ssp_port_rmw(ssp, port, reg, 0, bits);
+}
+
+/* Called to setup port clock mode, caller must hold ssp->lock */
+static int __set_mode(struct ti_ssp *ssp, int port, int mode)
+{
+ mode &= SSP_PORT_CONFIG_MASK;
+ ssp_port_rmw(ssp, port, PORT_CFG_1, SSP_PORT_CONFIG_MASK, mode);
+
+ return 0;
+}
+
+int ti_ssp_set_mode(struct device *dev, int mode)
+{
+ struct ti_ssp *ssp = dev_to_ssp(dev);
+ int port = dev_to_port(dev);
+ int ret;
+
+ spin_lock(&ssp->lock);
+ ret = __set_mode(ssp, port, mode);
+ spin_unlock(&ssp->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(ti_ssp_set_mode);
+
+/* Called to setup iosel2, caller must hold ssp->lock */
+static void __set_iosel2(struct ti_ssp *ssp, u32 mask, u32 val)
+{
+ ssp->iosel2 = (ssp->iosel2 & ~mask) | val;
+ ssp_write(ssp, REG_IOSEL_2, ssp->iosel2);
+}
+
+/* Called to setup port iosel, caller must hold ssp->lock */
+static void __set_iosel(struct ti_ssp *ssp, int port, u32 iosel)
+{
+ unsigned val, shift = port ? 16 : 0;
+
+ /* IOSEL1 gets the least significant 16 bits */
+ val = ssp_read(ssp, REG_IOSEL_1);
+ val &= 0xffff << (port ? 0 : 16);
+ val |= (iosel & 0xffff) << (port ? 16 : 0);
+ ssp_write(ssp, REG_IOSEL_1, val);
+
+ /* IOSEL2 gets the most significant 16 bits */
+ val = (iosel >> 16) & 0x7;
+ __set_iosel2(ssp, 0x7 << shift, val << shift);
+}
+
+int ti_ssp_set_iosel(struct device *dev, u32 iosel)
+{
+ struct ti_ssp *ssp = dev_to_ssp(dev);
+ int port = dev_to_port(dev);
+
+ spin_lock(&ssp->lock);
+ __set_iosel(ssp, port, iosel);
+ spin_unlock(&ssp->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(ti_ssp_set_iosel);
+
+int ti_ssp_load(struct device *dev, int offs, u32* prog, int len)
+{
+ struct ti_ssp *ssp = dev_to_ssp(dev);
+ int port = dev_to_port(dev);
+ int i;
+
+ if (len > SSP_PORT_SEQRAM_SIZE)
+ return -ENOSPC;
+
+ spin_lock(&ssp->lock);
+
+ /* Enable SeqRAM access */
+ ssp_port_set_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN);
+
+ /* Copy code */
+ for (i = 0; i < len; i++) {
+ __raw_writel(prog[i], ssp->regs + offs + 4*i +
+ ssp_port_seqram[port]);
+ }
+
+ /* Disable SeqRAM access */
+ ssp_port_clr_bits(ssp, port, PORT_CFG_2, SSP_SEQRAM_WR_EN);
+
+ spin_unlock(&ssp->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(ti_ssp_load);
+
+int ti_ssp_raw_read(struct device *dev)
+{
+ struct ti_ssp *ssp = dev_to_ssp(dev);
+ int port = dev_to_port(dev);
+ int shift = port ? 27 : 11;
+
+ return (ssp_read(ssp, REG_IOSEL_2) >> shift) & 0xf;
+}
+EXPORT_SYMBOL(ti_ssp_raw_read);
+
+int ti_ssp_raw_write(struct device *dev, u32 val)
+{
+ struct ti_ssp *ssp = dev_to_ssp(dev);
+ int port = dev_to_port(dev), shift;
+
+ spin_lock(&ssp->lock);
+
+ shift = port ? 22 : 6;
+ val &= 0xf;
+ __set_iosel2(ssp, 0xf << shift, val << shift);
+
+ spin_unlock(&ssp->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(ti_ssp_raw_write);
+
+static inline int __xfer_done(struct ti_ssp *ssp, int port)
+{
+ return !(ssp_port_read(ssp, port, PORT_CFG_1) & SSP_BUSY);
+}
+
+int ti_ssp_run(struct device *dev, u32 pc, u32 input, u32 *output)
+{
+ struct ti_ssp *ssp = dev_to_ssp(dev);
+ int port = dev_to_port(dev);
+ int ret;
+
+ if (pc & ~(0x3f))
+ return -EINVAL;
+
+ /* Grab ssp->lock to serialize rmw on ssp registers */
+ spin_lock(&ssp->lock);
+
+ ssp_port_write(ssp, port, PORT_ADDR, input >> 16);
+ ssp_port_write(ssp, port, PORT_DATA, input & 0xffff);
+ ssp_port_rmw(ssp, port, PORT_CFG_1, 0x3f, pc);
+
+ /* grab wait queue head lock to avoid race with the isr */
+ spin_lock_irq(&ssp->wqh.lock);
+
+ /* kick off sequence execution in hardware */
+ ssp_port_set_bits(ssp, port, PORT_CFG_1, SSP_START);
+
+ /* drop ssp lock; no register writes beyond this */
+ spin_unlock(&ssp->lock);
+
+ ret = wait_event_interruptible_locked_irq(ssp->wqh,
+ __xfer_done(ssp, port));
+ spin_unlock_irq(&ssp->wqh.lock);
+
+ if (ret < 0)
+ return ret;
+
+ if (output) {
+ *output = (ssp_port_read(ssp, port, PORT_ADDR) << 16) |
+ (ssp_port_read(ssp, port, PORT_DATA) & 0xffff);
+ }
+
+ ret = ssp_port_read(ssp, port, PORT_STATE) & 0x3f; /* stop address */
+
+ return ret;
+}
+EXPORT_SYMBOL(ti_ssp_run);
+
+static irqreturn_t ti_ssp_interrupt(int irq, void *dev_data)
+{
+ struct ti_ssp *ssp = dev_data;
+
+ spin_lock(&ssp->wqh.lock);
+
+ ssp_write(ssp, REG_INTR_ST, 0x3);
+ wake_up_locked(&ssp->wqh);
+
+ spin_unlock(&ssp->wqh.lock);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit ti_ssp_probe(struct platform_device *pdev)
+{
+ static struct ti_ssp *ssp;
+ const struct ti_ssp_data *pdata = pdev->dev.platform_data;
+ int error = 0, prediv = 0xff, id;
+ unsigned long sysclk;
+ struct device *dev = &pdev->dev;
+ struct mfd_cell cells[2];
+
+ ssp = kzalloc(sizeof(*ssp), GFP_KERNEL);
+ if (!ssp) {
+ dev_err(dev, "cannot allocate device info\n");
+ return -ENOMEM;
+ }
+
+ ssp->dev = dev;
+ dev_set_drvdata(dev, ssp);
+
+ ssp->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!ssp->res) {
+ error = -ENODEV;
+ dev_err(dev, "cannot determine register area\n");
+ goto error_res;
+ }
+
+ if (!request_mem_region(ssp->res->start, resource_size(ssp->res),
+ pdev->name)) {
+ error = -ENOMEM;
+ dev_err(dev, "cannot claim register memory\n");
+ goto error_res;
+ }
+
+ ssp->regs = ioremap(ssp->res->start, resource_size(ssp->res));
+ if (!ssp->regs) {
+ error = -ENOMEM;
+ dev_err(dev, "cannot map register memory\n");
+ goto error_map;
+ }
+
+ ssp->clk = clk_get(dev, NULL);
+ if (IS_ERR(ssp->clk)) {
+ error = PTR_ERR(ssp->clk);
+ dev_err(dev, "cannot claim device clock\n");
+ goto error_clk;
+ }
+
+ ssp->irq = platform_get_irq(pdev, 0);
+ if (ssp->irq < 0) {
+ error = -ENODEV;
+ dev_err(dev, "unknown irq\n");
+ goto error_irq;
+ }
+
+ error = request_threaded_irq(ssp->irq, NULL, ti_ssp_interrupt, 0,
+ dev_name(dev), ssp);
+ if (error < 0) {
+ dev_err(dev, "cannot acquire irq\n");
+ goto error_irq;
+ }
+
+ spin_lock_init(&ssp->lock);
+ init_waitqueue_head(&ssp->wqh);
+
+ /* Power on and initialize SSP */
+ error = clk_enable(ssp->clk);
+ if (error) {
+ dev_err(dev, "cannot enable device clock\n");
+ goto error_enable;
+ }
+
+ /* Reset registers to a sensible known state */
+ ssp_write(ssp, REG_IOSEL_1, 0);
+ ssp_write(ssp, REG_IOSEL_2, 0);
+ ssp_write(ssp, REG_INTR_EN, 0x3);
+ ssp_write(ssp, REG_INTR_ST, 0x3);
+ ssp_write(ssp, REG_TEST_CTRL, 0);
+ ssp_port_write(ssp, 0, PORT_CFG_1, SSP_PORT_ASL);
+ ssp_port_write(ssp, 1, PORT_CFG_1, SSP_PORT_ASL);
+ ssp_port_write(ssp, 0, PORT_CFG_2, SSP_PORT_CFO1);
+ ssp_port_write(ssp, 1, PORT_CFG_2, SSP_PORT_CFO1);
+
+ sysclk = clk_get_rate(ssp->clk);
+ if (pdata && pdata->out_clock)
+ prediv = (sysclk / pdata->out_clock) - 1;
+ prediv = clamp(prediv, 0, 0xff);
+ ssp_rmw(ssp, REG_PREDIV, 0xff, prediv);
+
+ memset(cells, 0, sizeof(cells));
+ for (id = 0; id < 2; id++) {
+ const struct ti_ssp_dev_data *data = &pdata->dev_data[id];
+
+ cells[id].id = id;
+ cells[id].name = data->dev_name;
+ cells[id].platform_data = data->pdata;
+ cells[id].data_size = data->pdata_size;
+ }
+
+ error = mfd_add_devices(dev, 0, cells, 2, NULL, 0);
+ if (error < 0) {
+ dev_err(dev, "cannot add mfd cells\n");
+ goto error_enable;
+ }
+
+ return 0;
+
+error_enable:
+ free_irq(ssp->irq, ssp);
+error_irq:
+ clk_put(ssp->clk);
+error_clk:
+ iounmap(ssp->regs);
+error_map:
+ release_mem_region(ssp->res->start, resource_size(ssp->res));
+error_res:
+ kfree(ssp);
+ return error;
+}
+
+static int __devexit ti_ssp_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ti_ssp *ssp = dev_get_drvdata(dev);
+
+ mfd_remove_devices(dev);
+ clk_disable(ssp->clk);
+ free_irq(ssp->irq, ssp);
+ clk_put(ssp->clk);
+ iounmap(ssp->regs);
+ release_mem_region(ssp->res->start, resource_size(ssp->res));
+ kfree(ssp);
+ dev_set_drvdata(dev, NULL);
+ return 0;
+}
+
+static struct platform_driver ti_ssp_driver = {
+ .probe = ti_ssp_probe,
+ .remove = __devexit_p(ti_ssp_remove),
+ .driver = {
+ .name = "ti-ssp",
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init ti_ssp_init(void)
+{
+ return platform_driver_register(&ti_ssp_driver);
+}
+module_init(ti_ssp_init);
+
+static void __exit ti_ssp_exit(void)
+{
+ platform_driver_unregister(&ti_ssp_driver);
+}
+module_exit(ti_ssp_exit);
+
+MODULE_DESCRIPTION("Sequencer Serial Port (SSP) Driver");
+MODULE_AUTHOR("Cyril Chemparathy");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ti-ssp");