| /* |
| * Copyright (C) 2000 Andreas E. Bombe |
| * 2001 Ben Collins <bcollins@debian.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| #ifndef _IEEE1394_NODEMGR_H |
| #define _IEEE1394_NODEMGR_H |
| |
| #include <linux/device.h> |
| #include <asm/types.h> |
| |
| #include "ieee1394_core.h" |
| #include "ieee1394_types.h" |
| |
| struct csr1212_csr; |
| struct csr1212_keyval; |
| struct hpsb_host; |
| struct ieee1394_device_id; |
| |
| /* This is the start of a Node entry structure. It should be a stable API |
| * for which to gather info from the Node Manager about devices attached |
| * to the bus. */ |
| struct bus_options { |
| u8 irmc; /* Iso Resource Manager Capable */ |
| u8 cmc; /* Cycle Master Capable */ |
| u8 isc; /* Iso Capable */ |
| u8 bmc; /* Bus Master Capable */ |
| u8 pmc; /* Power Manager Capable (PNP spec) */ |
| u8 cyc_clk_acc; /* Cycle clock accuracy */ |
| u8 max_rom; /* Maximum block read supported in the CSR */ |
| u8 generation; /* Incremented when configrom changes */ |
| u8 lnkspd; /* Link speed */ |
| u16 max_rec; /* Maximum packet size node can receive */ |
| }; |
| |
| #define UNIT_DIRECTORY_VENDOR_ID 0x01 |
| #define UNIT_DIRECTORY_MODEL_ID 0x02 |
| #define UNIT_DIRECTORY_SPECIFIER_ID 0x04 |
| #define UNIT_DIRECTORY_VERSION 0x08 |
| #define UNIT_DIRECTORY_HAS_LUN_DIRECTORY 0x10 |
| #define UNIT_DIRECTORY_LUN_DIRECTORY 0x20 |
| #define UNIT_DIRECTORY_HAS_LUN 0x40 |
| |
| /* |
| * A unit directory corresponds to a protocol supported by the |
| * node. If a node supports eg. IP/1394 and AV/C, its config rom has a |
| * unit directory for each of these protocols. |
| */ |
| struct unit_directory { |
| struct node_entry *ne; /* The node which this directory belongs to */ |
| octlet_t address; /* Address of the unit directory on the node */ |
| u8 flags; /* Indicates which entries were read */ |
| |
| quadlet_t vendor_id; |
| struct csr1212_keyval *vendor_name_kv; |
| |
| quadlet_t model_id; |
| struct csr1212_keyval *model_name_kv; |
| quadlet_t specifier_id; |
| quadlet_t version; |
| quadlet_t directory_id; |
| |
| unsigned int id; |
| |
| int ignore_driver; |
| |
| int length; /* Number of quadlets */ |
| |
| struct device device; |
| struct device unit_dev; |
| |
| struct csr1212_keyval *ud_kv; |
| u32 lun; /* logical unit number immediate value */ |
| }; |
| |
| struct node_entry { |
| u64 guid; /* GUID of this node */ |
| u32 guid_vendor_id; /* Top 24bits of guid */ |
| |
| struct hpsb_host *host; /* Host this node is attached to */ |
| nodeid_t nodeid; /* NodeID */ |
| struct bus_options busopt; /* Bus Options */ |
| bool needs_probe; |
| unsigned int generation; /* Synced with hpsb generation */ |
| |
| /* The following is read from the config rom */ |
| u32 vendor_id; |
| struct csr1212_keyval *vendor_name_kv; |
| |
| u32 capabilities; |
| |
| struct device device; |
| struct device node_dev; |
| |
| /* Means this node is not attached anymore */ |
| bool in_limbo; |
| |
| struct csr1212_csr *csr; |
| }; |
| |
| struct hpsb_protocol_driver { |
| /* The name of the driver, e.g. SBP2 or IP1394 */ |
| const char *name; |
| |
| /* |
| * The device id table describing the protocols and/or devices |
| * supported by this driver. This is used by the nodemgr to |
| * decide if a driver could support a given node, but the |
| * probe function below can implement further protocol |
| * dependent or vendor dependent checking. |
| */ |
| struct ieee1394_device_id *id_table; |
| |
| /* |
| * The update function is called when the node has just |
| * survived a bus reset, i.e. it is still present on the bus. |
| * However, it may be necessary to reestablish the connection |
| * or login into the node again, depending on the protocol. If the |
| * probe fails (returns non-zero), we unbind the driver from this |
| * device. |
| */ |
| int (*update)(struct unit_directory *ud); |
| |
| /* Our LDM structure */ |
| struct device_driver driver; |
| }; |
| |
| int __hpsb_register_protocol(struct hpsb_protocol_driver *, struct module *); |
| static inline int hpsb_register_protocol(struct hpsb_protocol_driver *driver) |
| { |
| return __hpsb_register_protocol(driver, THIS_MODULE); |
| } |
| |
| void hpsb_unregister_protocol(struct hpsb_protocol_driver *driver); |
| |
| static inline int hpsb_node_entry_valid(struct node_entry *ne) |
| { |
| return ne->generation == get_hpsb_generation(ne->host); |
| } |
| void hpsb_node_fill_packet(struct node_entry *ne, struct hpsb_packet *packet); |
| int hpsb_node_write(struct node_entry *ne, u64 addr, |
| quadlet_t *buffer, size_t length); |
| int nodemgr_for_each_host(void *data, int (*cb)(struct hpsb_host *, void *)); |
| |
| int init_ieee1394_nodemgr(void); |
| void cleanup_ieee1394_nodemgr(void); |
| |
| /* The template for a host device */ |
| extern struct device nodemgr_dev_template_host; |
| |
| /* Bus attributes we export */ |
| extern struct bus_attribute *const fw_bus_attrs[]; |
| |
| #endif /* _IEEE1394_NODEMGR_H */ |