[AVR32] Add nwait and tdf parameters to SMC configuration
Complete the SMC configuration code by adding nwait and tdf
parameter. After this change, we support the same parameters as the
hardware.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
index 7691721..5e22a75 100644
--- a/arch/avr32/mach-at32ap/hsmc.c
+++ b/arch/avr32/mach-at32ap/hsmc.c
@@ -75,12 +75,35 @@
return -EINVAL;
}
+ switch (config->nwait_mode) {
+ case 0:
+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_DISABLED);
+ break;
+ case 1:
+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_RESERVED);
+ break;
+ case 2:
+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_FROZEN);
+ break;
+ case 3:
+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_READY);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (config->tdf_cycles) {
+ mode |= HSMC_BF(TDF_CYCLES, config->tdf_cycles);
+ }
+
if (config->nrd_controlled)
mode |= HSMC_BIT(READ_MODE);
if (config->nwe_controlled)
mode |= HSMC_BIT(WRITE_MODE);
if (config->byte_write)
mode |= HSMC_BIT(BAT);
+ if (config->tdf_mode)
+ mode |= HSMC_BIT(TDF_MODE);
pr_debug("smc cs%d: setup/%08x pulse/%08x cycle/%08x mode/%08x\n",
cs, setup, pulse, cycle, mode);
diff --git a/include/asm-avr32/arch-at32ap/smc.h b/include/asm-avr32/arch-at32ap/smc.h
index 3732b32..07152b7 100644
--- a/include/asm-avr32/arch-at32ap/smc.h
+++ b/include/asm-avr32/arch-at32ap/smc.h
@@ -48,10 +48,32 @@
unsigned int nwe_controlled:1;
/*
+ * 0: NWAIT is disabled
+ * 1: Reserved
+ * 2: NWAIT is frozen mode
+ * 3: NWAIT in ready mode
+ */
+ unsigned int nwait_mode:2;
+
+ /*
* 0: Byte select access type
* 1: Byte write access type
*/
unsigned int byte_write:1;
+
+ /*
+ * Number of clock cycles before data is released after
+ * the rising edge of the read controlling signal
+ *
+ * Total cycles from SMC is tdf_cycles + 1
+ */
+ unsigned int tdf_cycles:4;
+
+ /*
+ * 0: TDF optimization disabled
+ * 1: TDF optimization enabled
+ */
+ unsigned int tdf_mode:1;
};
extern int smc_set_configuration(int cs, const struct smc_config *config);