powerpc/85xx: fix PCI and localbus properties in p1022ds.dts
PCI ranges, localbus reg and localbus chip-select 2 range do not match
the memory map setup by bootloader.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts
index 0ca0eb1..ef95717 100644
--- a/arch/powerpc/boot/dts/p1022ds.dts
+++ b/arch/powerpc/boot/dts/p1022ds.dts
@@ -21,7 +21,7 @@
reg = <0xf 0xffe05000 0 0x1000>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
- 0x2 0x0 0xf 0xffa00000 0x00040000
+ 0x2 0x0 0xf 0xff800000 0x00040000
0x3 0x0 0xf 0xffdf0000 0x00008000>;
/*
@@ -226,7 +226,7 @@
pci0: pcie@fffe09000 {
reg = <0xf 0xffe09000 0 0x1000>;
- ranges = <0x2000000 0x0 0xa0000000 0xc 0x20000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000
@@ -241,7 +241,7 @@
pci1: pcie@fffe0a000 {
reg = <0xf 0xffe0a000 0 0x1000>;
- ranges = <0x2000000 0x0 0xc0000000 0xc 0x40000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
@@ -257,7 +257,7 @@
pci2: pcie@fffe0b000 {
reg = <0xf 0xffe0b000 0 0x1000>;
- ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000
+ ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>;
pcie@0 {
ranges = <0x2000000 0x0 0xe0000000