rapidio: add IDT CPS/TSI switches
Extentions to RapidIO switch support:
1. modify switch route operation declarations to allow using single
switch-specific file for family of switches that share the same route
table operations.
2. add standard route table operations for switches that that support
route table manipulation registers as defined in the Rev.1.3 of RapidIO
specification.
3. add clear-route-table operation for switches
4. add CPSxx and TSIxxx families of RapidIO switches
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Tested-by: Thomas Moll <thomas.moll@sysgo.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/rapidio/Kconfig b/drivers/rapidio/Kconfig
index c32822a..606cb17 100644
--- a/drivers/rapidio/Kconfig
+++ b/drivers/rapidio/Kconfig
@@ -8,3 +8,5 @@
---help---
Amount of time a discovery node waits for a host to complete
enumeration before giving up.
+
+source "drivers/rapidio/switches/Kconfig"
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 4541509..7f1a675 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -55,6 +55,7 @@
static int rio_sport_phys_table[] = {
RIO_EFB_PAR_EP_FREE_ID,
RIO_EFB_SER_EP_FREE_ID,
+ RIO_EFB_SER_EP_FREC_ID,
-1,
};
@@ -246,10 +247,20 @@
pr_debug("RIO: adding routing ops for %s\n", rio_name(rdev));
rdev->rswitch->add_entry = cur->add_hook;
rdev->rswitch->get_entry = cur->get_hook;
+ rdev->rswitch->clr_table = cur->clr_hook;
+ break;
}
cur++;
}
+ if ((cur >= end) && (rdev->pef & RIO_PEF_STD_RT)) {
+ pr_debug("RIO: adding STD routing ops for %s\n",
+ rio_name(rdev));
+ rdev->rswitch->add_entry = rio_std_route_add_entry;
+ rdev->rswitch->get_entry = rio_std_route_get_entry;
+ rdev->rswitch->clr_table = rio_std_route_clr_table;
+ }
+
if (!rdev->rswitch->add_entry || !rdev->rswitch->get_entry)
printk(KERN_ERR "RIO: missing routing ops for %s\n",
rio_name(rdev));
@@ -349,7 +360,7 @@
if (rio_is_switch(rdev)) {
rio_mport_read_config_32(port, destid, hopcount,
RIO_SWP_INFO_CAR, &rdev->swpinfo);
- rswitch = kmalloc(sizeof(struct rio_switch), GFP_KERNEL);
+ rswitch = kzalloc(sizeof(struct rio_switch), GFP_KERNEL);
if (!rswitch)
goto cleanup;
rswitch->switchid = next_switchid;
@@ -369,6 +380,10 @@
rdev->rswitch->switchid);
rio_route_set_ops(rdev);
+ if (do_enum && rdev->rswitch->clr_table)
+ rdev->rswitch->clr_table(port, destid, hopcount,
+ RIO_GLOBAL_TABLE);
+
list_add_tail(&rswitch->node, &rio_switches);
} else
@@ -866,6 +881,9 @@
continue;
if (RIO_INVALID_ROUTE == rswitch->route_table[destid]) {
+ /* Skip if destid ends in empty switch*/
+ if (rswitch->destid == destid)
+ continue;
sport = rio_get_swpinfo_inport(port,
rswitch->destid, rswitch->hopcount);
diff --git a/drivers/rapidio/rio.c b/drivers/rapidio/rio.c
index 6395c78..67a3792 100644
--- a/drivers/rapidio/rio.c
+++ b/drivers/rapidio/rio.c
@@ -451,6 +451,110 @@
return rio_get_asm(vid, did, RIO_ANY_ID, RIO_ANY_ID, from);
}
+/**
+ * rio_std_route_add_entry - Add switch route table entry using standard
+ * registers defined in RIO specification rev.1.3
+ * @mport: Master port to issue transaction
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @table: routing table ID (global or port-specific)
+ * @route_destid: destID entry in the RT
+ * @route_port: destination port for specified destID
+ */
+int rio_std_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 route_port)
+{
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+ (u32)route_destid);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR,
+ (u32)route_port);
+ }
+ udelay(10);
+ return 0;
+}
+
+/**
+ * rio_std_route_get_entry - Read switch route table entry (port number)
+ * assosiated with specified destID using standard registers defined in RIO
+ * specification rev.1.3
+ * @mport: Master port to issue transaction
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @table: routing table ID (global or port-specific)
+ * @route_destid: destID entry in the RT
+ * @route_port: returned destination port for specified destID
+ */
+int rio_std_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 *route_port)
+{
+ u32 result;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+ *route_port = (u8)result;
+ }
+
+ return 0;
+}
+
+/**
+ * rio_std_route_clr_table - Clear swotch route table using standard registers
+ * defined in RIO specification rev.1.3.
+ * @mport: Master port to issue transaction
+ * @local: Indicate a local master port or remote device access
+ * @destid: Destination ID of the device
+ * @hopcount: Number of switch hops to the device
+ * @table: routing table ID (global or port-specific)
+ */
+int rio_std_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table)
+{
+ u32 max_destid = 0xff;
+ u32 i, pef, id_inc = 1, ext_cfg = 0;
+ u32 port_sel = RIO_INVALID_ROUTE;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_PEF_CAR, &pef);
+
+ if (mport->sys_size) {
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_SWITCH_RT_LIMIT,
+ &max_destid);
+ max_destid &= RIO_RT_MAX_DESTID;
+ }
+
+ if (pef & RIO_PEF_EXT_RT) {
+ ext_cfg = 0x80000000;
+ id_inc = 4;
+ port_sel = (RIO_INVALID_ROUTE << 24) |
+ (RIO_INVALID_ROUTE << 16) |
+ (RIO_INVALID_ROUTE << 8) |
+ RIO_INVALID_ROUTE;
+ }
+
+ for (i = 0; i <= max_destid;) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR,
+ ext_cfg | i);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR,
+ port_sel);
+ i += id_inc;
+ }
+ }
+
+ udelay(10);
+ return 0;
+}
+
static void rio_fixup_device(struct rio_dev *dev)
{
}
diff --git a/drivers/rapidio/rio.h b/drivers/rapidio/rio.h
index 7786d02..b53c5ec 100644
--- a/drivers/rapidio/rio.h
+++ b/drivers/rapidio/rio.h
@@ -21,6 +21,14 @@
extern int rio_create_sysfs_dev_files(struct rio_dev *rdev);
extern int rio_enum_mport(struct rio_mport *mport);
extern int rio_disc_mport(struct rio_mport *mport);
+extern int rio_std_route_add_entry(struct rio_mport *mport, u16 destid,
+ u8 hopcount, u16 table, u16 route_destid,
+ u8 route_port);
+extern int rio_std_route_get_entry(struct rio_mport *mport, u16 destid,
+ u8 hopcount, u16 table, u16 route_destid,
+ u8 *route_port);
+extern int rio_std_route_clr_table(struct rio_mport *mport, u16 destid,
+ u8 hopcount, u16 table);
/* Structures internal to the RIO core code */
extern struct device_attribute rio_dev_attrs[];
@@ -30,9 +38,9 @@
extern struct rio_route_ops __end_rio_route_ops[];
/* Helpers internal to the RIO core code */
-#define DECLARE_RIO_ROUTE_SECTION(section, vid, did, add_hook, get_hook) \
- static struct rio_route_ops __rio_route_ops __used \
- __section(section)= { vid, did, add_hook, get_hook };
+#define DECLARE_RIO_ROUTE_SECTION(section, name, vid, did, add_hook, get_hook, clr_hook) \
+ static const struct rio_route_ops __rio_route_##name __used \
+ __section(section) = { vid, did, add_hook, get_hook, clr_hook };
/**
* DECLARE_RIO_ROUTE_OPS - Registers switch routing operations
@@ -47,9 +55,9 @@
* rio_route_ops is initialized with the ops and placed into a
* RIO-specific kernel section.
*/
-#define DECLARE_RIO_ROUTE_OPS(vid, did, add_hook, get_hook) \
- DECLARE_RIO_ROUTE_SECTION(.rio_route_ops, \
- vid, did, add_hook, get_hook)
+#define DECLARE_RIO_ROUTE_OPS(vid, did, add_hook, get_hook, clr_hook) \
+ DECLARE_RIO_ROUTE_SECTION(.rio_route_ops, vid##did, \
+ vid, did, add_hook, get_hook, clr_hook)
#define RIO_GET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
#define RIO_SET_DID(size, x) (size ? (x & 0xffff) : ((x & 0x000000ff) << 16))
diff --git a/drivers/rapidio/switches/Kconfig b/drivers/rapidio/switches/Kconfig
new file mode 100644
index 0000000..6969f39
--- /dev/null
+++ b/drivers/rapidio/switches/Kconfig
@@ -0,0 +1,28 @@
+#
+# RapidIO switches configuration
+#
+config RAPIDIO_TSI57X
+ bool "IDT Tsi57x SRIO switches support"
+ depends on RAPIDIO
+ ---help---
+ Includes support for ITD Tsi57x family of serial RapidIO switches.
+
+config RAPIDIO_CPS_XX
+ bool "IDT CPS-xx SRIO switches support"
+ depends on RAPIDIO
+ ---help---
+ Includes support for ITD CPS-16/12/10/8 serial RapidIO switches.
+
+config RAPIDIO_TSI568
+ bool "Tsi568 SRIO switch support"
+ depends on RAPIDIO
+ default n
+ ---help---
+ Includes support for ITD Tsi568 serial RapidIO switch.
+
+config RAPIDIO_TSI500
+ bool "Tsi500 Parallel RapidIO switch support"
+ depends on RAPIDIO
+ default n
+ ---help---
+ Includes support for ITD Tsi500 parallel RapidIO switch.
diff --git a/drivers/rapidio/switches/Makefile b/drivers/rapidio/switches/Makefile
index b924f83..0fece0e 100644
--- a/drivers/rapidio/switches/Makefile
+++ b/drivers/rapidio/switches/Makefile
@@ -2,4 +2,7 @@
# Makefile for RIO switches
#
-obj-$(CONFIG_RAPIDIO) += tsi500.o
+obj-$(CONFIG_RAPIDIO_TSI57X) += tsi57x.o
+obj-$(CONFIG_RAPIDIO_CPS_XX) += idtcps.o
+obj-$(CONFIG_RAPIDIO_TSI568) += tsi568.o
+obj-$(CONFIG_RAPIDIO_TSI500) += tsi500.o
diff --git a/drivers/rapidio/switches/idtcps.c b/drivers/rapidio/switches/idtcps.c
new file mode 100644
index 0000000..7e3d032
--- /dev/null
+++ b/drivers/rapidio/switches/idtcps.c
@@ -0,0 +1,89 @@
+/*
+ * IDT CPS RapidIO switches support
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include "../rio.h"
+
+#define CPS_NO_ROUTE 0xdf
+
+static int
+idtcps_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 route_port)
+{
+ u32 result;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+ result = (0xffffff00 & result) | (u32)route_port;
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR, result);
+ }
+
+ return 0;
+}
+
+static int
+idtcps_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 *route_port)
+{
+ u32 result;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR, route_destid);
+
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR, &result);
+
+ if (CPS_NO_ROUTE == (u8)result)
+ result = RIO_INVALID_ROUTE;
+
+ *route_port = (u8)result;
+ }
+
+ return 0;
+}
+
+static int
+idtcps_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table)
+{
+ u32 i;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ for (i = 0x80000000; i <= 0x800000ff;) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_DESTID_SEL_CSR, i);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ RIO_STD_RTE_CONF_PORT_SEL_CSR,
+ (RIO_INVALID_ROUTE << 24) |
+ (RIO_INVALID_ROUTE << 16) |
+ (RIO_INVALID_ROUTE << 8) | RIO_INVALID_ROUTE);
+ i += 4;
+ }
+ }
+
+ return 0;
+}
+
+DECLARE_RIO_ROUTE_OPS(RIO_VID_IDT, RIO_DID_IDTCPS6Q, idtcps_route_add_entry, idtcps_route_get_entry, idtcps_route_clr_table);
+DECLARE_RIO_ROUTE_OPS(RIO_VID_IDT, RIO_DID_IDTCPS8, idtcps_route_add_entry, idtcps_route_get_entry, idtcps_route_clr_table);
+DECLARE_RIO_ROUTE_OPS(RIO_VID_IDT, RIO_DID_IDTCPS10Q, idtcps_route_add_entry, idtcps_route_get_entry, idtcps_route_clr_table);
+DECLARE_RIO_ROUTE_OPS(RIO_VID_IDT, RIO_DID_IDTCPS12, idtcps_route_add_entry, idtcps_route_get_entry, idtcps_route_clr_table);
+DECLARE_RIO_ROUTE_OPS(RIO_VID_IDT, RIO_DID_IDTCPS16, idtcps_route_add_entry, idtcps_route_get_entry, idtcps_route_clr_table);
+DECLARE_RIO_ROUTE_OPS(RIO_VID_IDT, RIO_DID_IDT70K200, idtcps_route_add_entry, idtcps_route_get_entry, idtcps_route_clr_table);
diff --git a/drivers/rapidio/switches/tsi500.c b/drivers/rapidio/switches/tsi500.c
index c77c23b..ae553bb 100644
--- a/drivers/rapidio/switches/tsi500.c
+++ b/drivers/rapidio/switches/tsi500.c
@@ -57,4 +57,4 @@
return ret;
}
-DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI500, tsi500_route_add_entry, tsi500_route_get_entry);
+DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI500, tsi500_route_add_entry, tsi500_route_get_entry, NULL);
diff --git a/drivers/rapidio/switches/tsi568.c b/drivers/rapidio/switches/tsi568.c
new file mode 100644
index 0000000..bce9112
--- /dev/null
+++ b/drivers/rapidio/switches/tsi568.c
@@ -0,0 +1,106 @@
+/*
+ * RapidIO Tsi568 switch support
+ *
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+#include "../rio.h"
+
+/* Global (broadcast) route registers */
+#define SPBC_ROUTE_CFG_DESTID 0x10070
+#define SPBC_ROUTE_CFG_PORT 0x10074
+
+/* Per port route registers */
+#define SPP_ROUTE_CFG_DESTID(n) (0x11070 + 0x100*n)
+#define SPP_ROUTE_CFG_PORT(n) (0x11074 + 0x100*n)
+
+static int
+tsi568_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 route_port)
+{
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_DESTID, route_destid);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_PORT, route_port);
+ } else {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_DESTID(table),
+ route_destid);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_PORT(table), route_port);
+ }
+
+ udelay(10);
+
+ return 0;
+}
+
+static int
+tsi568_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 *route_port)
+{
+ int ret = 0;
+ u32 result;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_DESTID, route_destid);
+ rio_mport_read_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_PORT, &result);
+ } else {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_DESTID(table),
+ route_destid);
+ rio_mport_read_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_PORT(table), &result);
+ }
+
+ *route_port = result;
+ if (*route_port > 15)
+ ret = -1;
+
+ return ret;
+}
+
+static int
+tsi568_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table)
+{
+ u32 route_idx;
+ u32 lut_size;
+
+ lut_size = (mport->sys_size) ? 0x1ff : 0xff;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_DESTID, 0x80000000);
+ for (route_idx = 0; route_idx <= lut_size; route_idx++)
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_PORT,
+ RIO_INVALID_ROUTE);
+ } else {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_DESTID(table),
+ 0x80000000);
+ for (route_idx = 0; route_idx <= lut_size; route_idx++)
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_PORT(table),
+ RIO_INVALID_ROUTE);
+ }
+
+ return 0;
+}
+
+DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI568, tsi568_route_add_entry, tsi568_route_get_entry, tsi568_route_clr_table);
diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c
new file mode 100644
index 0000000..5ad7880
--- /dev/null
+++ b/drivers/rapidio/switches/tsi57x.c
@@ -0,0 +1,106 @@
+/*
+ * RapidIO Tsi57x switch family support
+ *
+ * Copyright 2009 Integrated Device Technology, Inc.
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/rio.h>
+#include <linux/rio_drv.h>
+#include <linux/rio_ids.h>
+#include <linux/delay.h>
+#include "../rio.h"
+
+/* Global (broadcast) route registers */
+#define SPBC_ROUTE_CFG_DESTID 0x10070
+#define SPBC_ROUTE_CFG_PORT 0x10074
+
+/* Per port route registers */
+#define SPP_ROUTE_CFG_DESTID(n) (0x11070 + 0x100*n)
+#define SPP_ROUTE_CFG_PORT(n) (0x11074 + 0x100*n)
+
+static int
+tsi57x_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 route_port)
+{
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_DESTID, route_destid);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_PORT, route_port);
+ } else {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_DESTID(table), route_destid);
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_PORT(table), route_port);
+ }
+
+ udelay(10);
+
+ return 0;
+}
+
+static int
+tsi57x_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table, u16 route_destid, u8 *route_port)
+{
+ int ret = 0;
+ u32 result;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ /* Use local RT of the ingress port to avoid possible
+ race condition */
+ rio_mport_read_config_32(mport, destid, hopcount,
+ RIO_SWP_INFO_CAR, &result);
+ table = (result & RIO_SWP_INFO_PORT_NUM_MASK);
+ }
+
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_DESTID(table), route_destid);
+ rio_mport_read_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_PORT(table), &result);
+
+ *route_port = (u8)result;
+ if (*route_port > 15)
+ ret = -1;
+
+ return ret;
+}
+
+static int
+tsi57x_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table)
+{
+ u32 route_idx;
+ u32 lut_size;
+
+ lut_size = (mport->sys_size) ? 0x1ff : 0xff;
+
+ if (table == RIO_GLOBAL_TABLE) {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_DESTID, 0x80000000);
+ for (route_idx = 0; route_idx <= lut_size; route_idx++)
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPBC_ROUTE_CFG_PORT,
+ RIO_INVALID_ROUTE);
+ } else {
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_DESTID(table), 0x80000000);
+ for (route_idx = 0; route_idx <= lut_size; route_idx++)
+ rio_mport_write_config_32(mport, destid, hopcount,
+ SPP_ROUTE_CFG_PORT(table) , RIO_INVALID_ROUTE);
+ }
+
+ return 0;
+}
+
+DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI572, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table);
+DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table);
+DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table);
+DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table);
diff --git a/include/linux/rio.h b/include/linux/rio.h
index dc0c755..29d9899 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -213,6 +213,7 @@
* @route_table: Copy of switch routing table
* @add_entry: Callback for switch-specific route add function
* @get_entry: Callback for switch-specific route get function
+ * @clr_table: Callback for switch-specific clear route table function
*/
struct rio_switch {
struct list_head node;
@@ -224,6 +225,8 @@
u16 table, u16 route_destid, u8 route_port);
int (*get_entry) (struct rio_mport * mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 * route_port);
+ int (*clr_table) (struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table);
};
/* Low-level architecture-dependent routines */
@@ -307,6 +310,7 @@
* @did: RIO device ID
* @add_hook: Callback that adds a route entry
* @get_hook: Callback that gets a route entry
+ * @clr_hook: Callback that clears a switch route table (may be NULL)
*
* Defines the operations that are necessary to manipulate the route
* tables for a particular RIO switch device.
@@ -317,6 +321,8 @@
u16 table, u16 route_destid, u8 route_port);
int (*get_hook) (struct rio_mport * mport, u16 destid, u8 hopcount,
u16 table, u16 route_destid, u8 * route_port);
+ int (*clr_hook) (struct rio_mport *mport, u16 destid, u8 hopcount,
+ u16 table);
};
/* Architecture and hardware-specific functions */
diff --git a/include/linux/rio_ids.h b/include/linux/rio_ids.h
index 919d4e0..db50e1c 100644
--- a/include/linux/rio_ids.h
+++ b/include/linux/rio_ids.h
@@ -20,5 +20,19 @@
#define RIO_VID_TUNDRA 0x000d
#define RIO_DID_TSI500 0x0500
+#define RIO_DID_TSI568 0x0568
+#define RIO_DID_TSI572 0x0572
+#define RIO_DID_TSI574 0x0574
+#define RIO_DID_TSI576 0x0578 /* Same ID as Tsi578 */
+#define RIO_DID_TSI577 0x0577
+#define RIO_DID_TSI578 0x0578
+
+#define RIO_VID_IDT 0x0038
+#define RIO_DID_IDT70K200 0x0310
+#define RIO_DID_IDTCPS8 0x035c
+#define RIO_DID_IDTCPS12 0x035d
+#define RIO_DID_IDTCPS16 0x035b
+#define RIO_DID_IDTCPS6Q 0x035f
+#define RIO_DID_IDTCPS10Q 0x035e
#endif /* LINUX_RIO_IDS_H */
diff --git a/include/linux/rio_regs.h b/include/linux/rio_regs.h
index 326540f..4bfb0dc 100644
--- a/include/linux/rio_regs.h
+++ b/include/linux/rio_regs.h
@@ -39,6 +39,8 @@
#define RIO_PEF_INB_MBOX2 0x00200000 /* [II] Mailbox 2 */
#define RIO_PEF_INB_MBOX3 0x00100000 /* [II] Mailbox 3 */
#define RIO_PEF_INB_DOORBELL 0x00080000 /* [II] Doorbells */
+#define RIO_PEF_EXT_RT 0x00000200 /* [III, 1.3] Extended route table support */
+#define RIO_PEF_STD_RT 0x00000100 /* [III, 1.3] Standard route table support */
#define RIO_PEF_CTLS 0x00000010 /* [III] CTLS */
#define RIO_PEF_EXT_FEATURES 0x00000008 /* [I] EFT_PTR valid */
#define RIO_PEF_ADDR_66 0x00000004 /* [I] 66 bits */
@@ -91,7 +93,10 @@
#define RIO_OPS_ATOMIC_CLR 0x00000010 /* [I] Atomic clr op */
#define RIO_OPS_PORT_WRITE 0x00000004 /* [I] Port-write op */
- /* 0x20-0x3c *//* Reserved */
+ /* 0x20-0x30 *//* Reserved */
+
+#define RIO_SWITCH_RT_LIMIT 0x34 /* [III, 1.3] Switch Route Table Destination ID Limit CAR */
+#define RIO_RT_MAX_DESTID 0x0000ffff
#define RIO_MBOX_CSR 0x40 /* [II] Mailbox CSR */
#define RIO_MBOX0_AVAIL 0x80000000 /* [II] Mbox 0 avail */
@@ -153,7 +158,11 @@
#define RIO_HOST_DID_LOCK_CSR 0x68 /* [III] Host Base Device ID Lock CSR */
#define RIO_COMPONENT_TAG_CSR 0x6c /* [III] Component Tag CSR */
- /* 0x70-0xf8 *//* Reserved */
+#define RIO_STD_RTE_CONF_DESTID_SEL_CSR 0x70
+#define RIO_STD_RTE_CONF_PORT_SEL_CSR 0x74
+#define RIO_STD_RTE_DEFAULT_PORT 0x78
+
+ /* 0x7c-0xf8 *//* Reserved */
/* 0x100-0xfff8 *//* [I] Extended Features Space */
/* 0x10000-0xfffff8 *//* [I] Implementation-defined Space */
@@ -186,6 +195,7 @@
#define RIO_EFB_SER_EP_ID 0x0004 /* [VI] LP/Serial EP Devices */
#define RIO_EFB_SER_EP_REC_ID 0x0005 /* [VI] LP/Serial EP Recovery Devices */
#define RIO_EFB_SER_EP_FREE_ID 0x0006 /* [VI] LP/Serial EP Free Devices */
+#define RIO_EFB_SER_EP_FREC_ID 0x0009 /* [VI] LP/Serial EP Free Recovery Devices */
/*
* Physical 8/16 LP-LVDS