mac80211: A-MPDU Rx adding basic functionality
This patch adds the basic needed abilities and functions for A-MPDU Rx session
changed functions:
- ieee80211_sta_process_addba_request - Rx A-MPDU initialization enabled
- ieee80211_stop - stops all A-MPDU Rx in case interface goes down
added functions:
- ieee80211_send_delba - used for sending out Del BA in A-MPDU sessions
- ieee80211_sta_stop_rx_BA_session - stopping Rx A-MPDU session
- sta_rx_agg_session_timer_expired - stops A-MPDU Rx use if load is too
low
Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/net/mac80211/ieee80211_sta.c b/net/mac80211/ieee80211_sta.c
index 5b8f484..d5a7683 100644
--- a/net/mac80211/ieee80211_sta.c
+++ b/net/mac80211/ieee80211_sta.c
@@ -64,6 +64,11 @@
#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFA0
+/* next values represent the buffer size for A-MPDU frame.
+ * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2) */
+#define IEEE80211_MIN_AMPDU_BUF 0x8
+#define IEEE80211_MAX_AMPDU_BUF 0x40
+
static void ieee80211_send_probe_req(struct net_device *dev, u8 *dst,
u8 *ssid, size_t ssid_len);
static struct ieee80211_sta_bss *
@@ -1005,7 +1010,8 @@
struct ieee80211_mgmt *mgmt;
u16 capab;
- skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom);
+ skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom + 1 +
+ sizeof(mgmt->u.action.u.addba_resp));
if (!skb) {
printk(KERN_DEBUG "%s: failed to allocate buffer "
"for addba resp frame\n", dev->name);
@@ -1047,9 +1053,14 @@
size_t len)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_hw *hw = &local->hw;
+ struct ieee80211_conf *conf = &hw->conf;
struct sta_info *sta;
- u16 capab, tid, timeout, ba_policy, buf_size, status;
+ struct tid_ampdu_rx *tid_agg_rx;
+ u16 capab, tid, timeout, ba_policy, buf_size, start_seq_num, status;
u8 dialog_token;
+ int ret = -EOPNOTSUPP;
+ DECLARE_MAC_BUF(mac);
sta = sta_info_get(local, mgmt->sa);
if (!sta)
@@ -1058,28 +1069,216 @@
/* extract session parameters from addba request frame */
dialog_token = mgmt->u.action.u.addba_req.dialog_token;
timeout = le16_to_cpu(mgmt->u.action.u.addba_req.timeout);
+ start_seq_num =
+ le16_to_cpu(mgmt->u.action.u.addba_req.start_seq_num) >> 4;
capab = le16_to_cpu(mgmt->u.action.u.addba_req.capab);
ba_policy = (capab & IEEE80211_ADDBA_PARAM_POLICY_MASK) >> 1;
tid = (capab & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
buf_size = (capab & IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK) >> 6;
- /* TODO - currently aggregation is declined (A-MPDU add BA request
- * acceptance is not obligatory by 802.11n draft), but here is
- * the entry point for dealing with it */
-#ifdef MAC80211_HT_DEBUG
- if (net_ratelimit())
- printk(KERN_DEBUG "Add Block Ack request arrived,"
- " currently denying it\n");
-#endif /* MAC80211_HT_DEBUG */
-
status = WLAN_STATUS_REQUEST_DECLINED;
+ /* sanity check for incoming parameters:
+ * check if configuration can support the BA policy
+ * and if buffer size does not exceeds max value */
+ if (((ba_policy != 1)
+ && (!(conf->ht_conf.cap & IEEE80211_HT_CAP_DELAY_BA)))
+ || (buf_size > IEEE80211_MAX_AMPDU_BUF)) {
+ status = WLAN_STATUS_INVALID_QOS_PARAM;
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ if (net_ratelimit())
+ printk(KERN_DEBUG "Block Ack Req with bad params from "
+ "%s on tid %u. policy %d, buffer size %d\n",
+ print_mac(mac, mgmt->sa), tid, ba_policy,
+ buf_size);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+ goto end_no_lock;
+ }
+ /* determine default buffer size */
+ if (buf_size == 0) {
+ struct ieee80211_hw_mode *mode = conf->mode;
+ buf_size = IEEE80211_MIN_AMPDU_BUF;
+ buf_size = buf_size << mode->ht_info.ampdu_factor;
+ }
+
+ tid_agg_rx = &sta->ampdu_mlme.tid_rx[tid];
+
+ /* examine state machine */
+ spin_lock_bh(&sta->ampdu_mlme.ampdu_rx);
+
+ if (tid_agg_rx->state != HT_AGG_STATE_IDLE) {
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ if (net_ratelimit())
+ printk(KERN_DEBUG "unexpected Block Ack Req from "
+ "%s on tid %u\n",
+ print_mac(mac, mgmt->sa), tid);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+ goto end;
+ }
+
+ /* prepare reordering buffer */
+ tid_agg_rx->reorder_buf =
+ kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC);
+ if ((!tid_agg_rx->reorder_buf) && net_ratelimit()) {
+ printk(KERN_ERR "can not allocate reordering buffer "
+ "to tid %d\n", tid);
+ goto end;
+ }
+ memset(tid_agg_rx->reorder_buf, 0,
+ buf_size * sizeof(struct sk_buf *));
+
+ if (local->ops->ampdu_action)
+ ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START,
+ sta->addr, tid, start_seq_num);
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ printk(KERN_DEBUG "Rx A-MPDU on tid %d result %d", tid, ret);
+#endif /* CONFIG_MAC80211_HT_DEBUG */
+
+ if (ret) {
+ kfree(tid_agg_rx->reorder_buf);
+ goto end;
+ }
+
+ /* change state and send addba resp */
+ tid_agg_rx->state = HT_AGG_STATE_OPERATIONAL;
+ tid_agg_rx->dialog_token = dialog_token;
+ tid_agg_rx->ssn = start_seq_num;
+ tid_agg_rx->head_seq_num = start_seq_num;
+ tid_agg_rx->buf_size = buf_size;
+ tid_agg_rx->timeout = timeout;
+ tid_agg_rx->stored_mpdu_num = 0;
+ status = WLAN_STATUS_SUCCESS;
+end:
+ spin_unlock_bh(&sta->ampdu_mlme.ampdu_rx);
+
+end_no_lock:
ieee80211_send_addba_resp(sta->dev, sta->addr, tid, dialog_token,
status, 1, buf_size, timeout);
sta_info_put(sta);
}
+void ieee80211_send_delba(struct net_device *dev, const u8 *da, u16 tid,
+ u16 initiator, u16 reason_code)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ struct ieee80211_if_sta *ifsta = &sdata->u.sta;
+ struct sk_buff *skb;
+ struct ieee80211_mgmt *mgmt;
+ u16 params;
+
+ skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom + 1 +
+ sizeof(mgmt->u.action.u.delba));
+
+ if (!skb) {
+ printk(KERN_ERR "%s: failed to allocate buffer "
+ "for delba frame\n", dev->name);
+ return;
+ }
+
+ skb_reserve(skb, local->hw.extra_tx_headroom);
+ mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
+ memset(mgmt, 0, 24);
+ memcpy(mgmt->da, da, ETH_ALEN);
+ memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN);
+ if (sdata->type == IEEE80211_IF_TYPE_AP)
+ memcpy(mgmt->bssid, dev->dev_addr, ETH_ALEN);
+ else
+ memcpy(mgmt->bssid, ifsta->bssid, ETH_ALEN);
+ mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT,
+ IEEE80211_STYPE_ACTION);
+
+ skb_put(skb, 1 + sizeof(mgmt->u.action.u.delba));
+
+ mgmt->u.action.category = WLAN_CATEGORY_BACK;
+ mgmt->u.action.u.delba.action_code = WLAN_ACTION_DELBA;
+ params = (u16)(initiator << 11); /* bit 11 initiator */
+ params |= (u16)(tid << 12); /* bit 15:12 TID number */
+
+ mgmt->u.action.u.delba.params = cpu_to_le16(params);
+ mgmt->u.action.u.delba.reason_code = cpu_to_le16(reason_code);
+
+ ieee80211_sta_tx(dev, skb, 0);
+}
+
+void ieee80211_sta_stop_rx_ba_session(struct net_device *dev, u8 *ra, u16 tid,
+ u16 initiator, u16 reason)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_hw *hw = &local->hw;
+ struct sta_info *sta;
+ int ret;
+
+ sta = sta_info_get(local, ra);
+ if (!sta)
+ return;
+
+ /* check if TID is in operational state */
+ spin_lock_bh(&sta->ampdu_mlme.ampdu_rx);
+ if (sta->ampdu_mlme.tid_rx[tid].state
+ != HT_AGG_STATE_OPERATIONAL) {
+ spin_unlock_bh(&sta->ampdu_mlme.ampdu_rx);
+ if (net_ratelimit())
+ printk(KERN_DEBUG "rx BA session requested to stop on "
+ "inactive tid %d\n", tid);
+ sta_info_put(sta);
+ return;
+ }
+ sta->ampdu_mlme.tid_rx[tid].state =
+ HT_AGG_STATE_REQ_STOP_BA_MSK |
+ (initiator << HT_AGG_STATE_INITIATOR_SHIFT);
+ spin_unlock_bh(&sta->ampdu_mlme.ampdu_rx);
+
+ /* stop HW Rx aggregation. ampdu_action existence
+ * already verified in session init so we add the BUG_ON */
+ BUG_ON(!local->ops->ampdu_action);
+
+ ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_STOP,
+ ra, tid, EINVAL);
+ if (ret)
+ printk(KERN_DEBUG "HW problem - can not stop rx "
+ "aggergation for tid %d\n", tid);
+
+ /* shutdown timer has not expired */
+ if (initiator != WLAN_BACK_TIMER)
+ del_timer_sync(&sta->ampdu_mlme.tid_rx[tid].
+ session_timer);
+
+ /* check if this is a self generated aggregation halt */
+ if (initiator == WLAN_BACK_RECIPIENT || initiator == WLAN_BACK_TIMER)
+ ieee80211_send_delba(dev, ra, tid, 0, reason);
+
+ /* free the reordering buffer */
+ kfree(sta->ampdu_mlme.tid_rx[tid].reorder_buf);
+
+ sta->ampdu_mlme.tid_rx[tid].state = HT_AGG_STATE_IDLE;
+ sta_info_put(sta);
+}
+
+/*
+ * After receiving Block Ack Request (BAR) we activated a
+ * timer after each frame arrives from the originator.
+ * if this timer expires ieee80211_sta_stop_rx_ba_session will be executed.
+ */
+void sta_rx_agg_session_timer_expired(unsigned long data)
+{
+ /* not an elegant detour, but there is no choice as the timer passes
+ * only one argument, and verious sta_info are needed here, so init
+ * flow in sta_info_add gives the TID as data, while the timer_to_id
+ * array gives the sta through container_of */
+ u8 *ptid = (u8 *)data;
+ u8 *timer_to_id = ptid - *ptid;
+ struct sta_info *sta = container_of(timer_to_id, struct sta_info,
+ timer_to_tid[0]);
+
+ printk(KERN_DEBUG "rx session timer expired on tid %d\n", (u16)*ptid);
+ ieee80211_sta_stop_rx_ba_session(sta->dev, sta->addr, (u16)*ptid,
+ WLAN_BACK_TIMER,
+ WLAN_REASON_QSTA_TIMEOUT);
+}
+
+
static void ieee80211_rx_mgmt_auth(struct net_device *dev,
struct ieee80211_if_sta *ifsta,
struct ieee80211_mgmt *mgmt,