drivers/isdn/hisax/bkm_a8.c - kernel/msm - Gitiles

 /* $Id: bkm_a8.c,v 1.22.2.4 2004/01/15 14:02:34 keil Exp $
  *
  * low level stuff for Scitel Quadro (4*S0, passive)
  *
  * Author       Roland Klabunde
  * Copyright    by Roland Klabunde   <R.Klabunde@Berkom.de>
  *
  * This software may be used and distributed according to the terms
  * of the GNU General Public License, incorporated herein by reference.
  *
  */


 #include <linux/init.h>
 #include "hisax.h"
 #include "isac.h"
 #include "ipac.h"
 #include "hscx.h"
 #include "isdnl1.h"
 #include <linux/pci.h>
 #include "bkm_ax.h"

 #ifdef CONFIG_PCI

 #define	ATTEMPT_PCI_REMAPPING	/* Required for PLX rev 1 */

 extern const char *CardType[];

 static const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $";

 static const char *sct_quadro_subtypes[] =
 {
 	"",
 	"#1",
 	"#2",
 	"#3",
 	"#4"
 };


 #define wordout(addr,val) outw(val,addr)
 #define wordin(addr) inw(addr)

 static inline u_char
 readreg(unsigned int ale, unsigned int adr, u_char off)
 {
 	register u_char ret;
 	wordout(ale, off);
 	ret = wordin(adr) & 0xFF;
 	return (ret);
 }

 static inline void
 readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
 {
 	int i;
 	wordout(ale, off);
 	for (i = 0; i < size; i++)
 		data[i] = wordin(adr) & 0xFF;
 }


 static inline void
 writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
 {
 	wordout(ale, off);
 	wordout(adr, data);
 }

 static inline void
 writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
 {
 	int i;
 	wordout(ale, off);
 	for (i = 0; i < size; i++)
 		wordout(adr, data[i]);
 }

 /* Interface functions */

 static u_char
 ReadISAC(struct IsdnCardState *cs, u_char offset)
 {
 	return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80));
 }

 static void
 WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
 {
 	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80, value);
 }

 static void
 ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
 {
 	readfifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
 }

 static void
 WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
 {
 	writefifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
 }


 static u_char
 ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
 {
 	return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0)));
 }

 static void
 WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
 {
 	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0), value);
 }

 /* Set the specific ipac to active */
 static void
 set_ipac_active(struct IsdnCardState *cs, u_int active)
 {
 	/* set irq mask */
 	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK,
 		active ? 0xc0 : 0xff);
 }

 /*
  * fast interrupt HSCX stuff goes here
  */

 #define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base, \
 	cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
 #define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base, \
 	cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
 #define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base, \
 	cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
 #define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base, \
 	cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)

 #include "hscx_irq.c"

 static irqreturn_t
 bkm_interrupt_ipac(int intno, void *dev_id, struct pt_regs *regs)
 {
 	struct IsdnCardState *cs = dev_id;
 	u_char ista, val, icnt = 5;
 	u_long flags;

 	spin_lock_irqsave(&cs->lock, flags);
 	ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
 	if (!(ista & 0x3f)) { /* not this IPAC */
 		spin_unlock_irqrestore(&cs->lock, flags);
 		return IRQ_NONE;
 	}
       Start_IPAC:
 	if (cs->debug & L1_DEB_IPAC)
 		debugl1(cs, "IPAC ISTA %02X", ista);
 	if (ista & 0x0f) {
 		val = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, HSCX_ISTA + 0x40);
 		if (ista & 0x01)
 			val |= 0x01;
 		if (ista & 0x04)
 			val |= 0x02;
 		if (ista & 0x08)
 			val |= 0x04;
 		if (val) {
 			hscx_int_main(cs, val);
 		}
 	}
 	if (ista & 0x20) {
 		val = 0xfe & readreg(cs->hw.ax.base, cs->hw.ax.data_adr, ISAC_ISTA | 0x80);
 		if (val) {
 			isac_interrupt(cs, val);
 		}
 	}
 	if (ista & 0x10) {
 		val = 0x01;
 		isac_interrupt(cs, val);
 	}
 	ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
 	if ((ista & 0x3f) && icnt) {
 		icnt--;
 		goto Start_IPAC;
 	}
 	if (!icnt)
 		printk(KERN_WARNING "HiSax: %s (%s) IRQ LOOP\n",
 		       CardType[cs->typ],
 		       sct_quadro_subtypes[cs->subtyp]);
 	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF);
 	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0);
 	spin_unlock_irqrestore(&cs->lock, flags);
 	return IRQ_HANDLED;
 }

 static void
 release_io_sct_quadro(struct IsdnCardState *cs)
 {
 	release_region(cs->hw.ax.base & 0xffffffc0, 128);
 	if (cs->subtyp == SCT_1)
 		release_region(cs->hw.ax.plx_adr, 64);
 }

 static void
 enable_bkm_int(struct IsdnCardState *cs, unsigned bEnable)
 {
 	if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
 		if (bEnable)
 			wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) | 0x41));
 		else
 			wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) & ~0x41));
 	}
 }

 static void
 reset_bkm(struct IsdnCardState *cs)
 {
 	if (cs->subtyp == SCT_1) {
 		wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) & ~4));
 		mdelay(10);
 		/* Remove the soft reset */
 		wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) | 4));
 		mdelay(10);
 	}
 }

 static int
 BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 {
 	u_long flags;

 	switch (mt) {
 		case CARD_RESET:
 			spin_lock_irqsave(&cs->lock, flags);
 			/* Disable ints */
 			set_ipac_active(cs, 0);
 			enable_bkm_int(cs, 0);
 			reset_bkm(cs);
 			spin_unlock_irqrestore(&cs->lock, flags);
 			return (0);
 		case CARD_RELEASE:
 			/* Sanity */
 			spin_lock_irqsave(&cs->lock, flags);
 			set_ipac_active(cs, 0);
 			enable_bkm_int(cs, 0);
 			spin_unlock_irqrestore(&cs->lock, flags);
 			release_io_sct_quadro(cs);
 			return (0);
 		case CARD_INIT:
 			spin_lock_irqsave(&cs->lock, flags);
 			cs->debug |= L1_DEB_IPAC;
 			set_ipac_active(cs, 1);
 			inithscxisac(cs, 3);
 			/* Enable ints */
 			enable_bkm_int(cs, 1);
 			spin_unlock_irqrestore(&cs->lock, flags);
 			return (0);
 		case CARD_TEST:
 			return (0);
 	}
 	return (0);
 }

 static int __devinit
 sct_alloc_io(u_int adr, u_int len)
 {
 	if (!request_region(adr, len, "scitel")) {
 		printk(KERN_WARNING
 			"HiSax: Scitel port %#x-%#x already in use\n",
 			adr, adr + len);
 		return (1);
 	}
 	return(0);
 }

 static struct pci_dev *dev_a8 __devinitdata = NULL;
 static u16  sub_vendor_id __devinitdata = 0;
 static u16  sub_sys_id __devinitdata = 0;
 static u_char pci_bus __devinitdata = 0;
 static u_char pci_device_fn __devinitdata = 0;
 static u_char pci_irq __devinitdata = 0;

 #endif /* CONFIG_PCI */

 int __devinit
 setup_sct_quadro(struct IsdnCard *card)
 {
 #ifdef CONFIG_PCI
 	struct IsdnCardState *cs = card->cs;
 	char tmp[64];
 	u_char pci_rev_id;
 	u_int found = 0;
 	u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5;

 	strcpy(tmp, sct_quadro_revision);
 	printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
 	if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
 		cs->subtyp = SCT_1;	/* Preset */
 	} else
 		return (0);

 	/* Identify subtype by para[0] */
 	if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
 		cs->subtyp = card->para[0];
 	else {
 		printk(KERN_WARNING "HiSax: %s: Invalid subcontroller in configuration, default to 1\n",
 			CardType[card->typ]);
 		return (0);
 	}
 	if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
 		(sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
 		return (0);
 	if (cs->subtyp == SCT_1) {
 		while ((dev_a8 = pci_find_device(PCI_VENDOR_ID_PLX,
 			PCI_DEVICE_ID_PLX_9050, dev_a8))) {

 			sub_vendor_id = dev_a8->subsystem_vendor;
 			sub_sys_id = dev_a8->subsystem_device;
 			if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) &&
 				(sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
 				if (pci_enable_device(dev_a8))
 					return(0);
 				pci_ioaddr1 = pci_resource_start(dev_a8, 1);
 				pci_irq = dev_a8->irq;
 				pci_bus = dev_a8->bus->number;
 				pci_device_fn = dev_a8->devfn;
 				found = 1;
 				break;
 			}
 		}
 		if (!found) {
 			printk(KERN_WARNING "HiSax: %s (%s): Card not found\n",
 				CardType[card->typ],
 				sct_quadro_subtypes[cs->subtyp]);
 			return (0);
 		}
 #ifdef ATTEMPT_PCI_REMAPPING
 /* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
 		pci_read_config_byte(dev_a8, PCI_REVISION_ID, &pci_rev_id);
 		if ((pci_ioaddr1 & 0x80) && (pci_rev_id == 1)) {
 			printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n",
 				CardType[card->typ],
 				sct_quadro_subtypes[cs->subtyp]);
 			/* Restart PCI negotiation */
 			pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
 			/* Move up by 0x80 byte */
 			pci_ioaddr1 += 0x80;
 			pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
 			pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1);
 			dev_a8->resource[ 1].start = pci_ioaddr1;
 		}
 #endif /* End HACK */
 	}
 	if (!pci_irq) {		/* IRQ range check ?? */
 		printk(KERN_WARNING "HiSax: %s (%s): No IRQ\n",
 		       CardType[card->typ],
 		       sct_quadro_subtypes[cs->subtyp]);
 		return (0);
 	}
 	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_1, &pci_ioaddr1);
 	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_2, &pci_ioaddr2);
 	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_3, &pci_ioaddr3);
 	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
 	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
 	if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
 		printk(KERN_WARNING "HiSax: %s (%s): No IO base address(es)\n",
 		       CardType[card->typ],
 		       sct_quadro_subtypes[cs->subtyp]);
 		return (0);
 	}
 	pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
 	pci_ioaddr2 &= PCI_BASE_ADDRESS_IO_MASK;
 	pci_ioaddr3 &= PCI_BASE_ADDRESS_IO_MASK;
 	pci_ioaddr4 &= PCI_BASE_ADDRESS_IO_MASK;
 	pci_ioaddr5 &= PCI_BASE_ADDRESS_IO_MASK;
 	/* Take over */
 	cs->irq = pci_irq;
 	cs->irq_flags |= IRQF_SHARED;
 	/* pci_ioaddr1 is unique to all subdevices */
 	/* pci_ioaddr2 is for the fourth subdevice only */
 	/* pci_ioaddr3 is for the third subdevice only */
 	/* pci_ioaddr4 is for the second subdevice only */
 	/* pci_ioaddr5 is for the first subdevice only */
 	cs->hw.ax.plx_adr = pci_ioaddr1;
 	/* Enter all ipac_base addresses */
 	switch(cs->subtyp) {
 		case 1:
 			cs->hw.ax.base = pci_ioaddr5 + 0x00;
 			if (sct_alloc_io(pci_ioaddr1, 128))
 				return(0);
 			if (sct_alloc_io(pci_ioaddr5, 64))
 				return(0);
 			/* disable all IPAC */
 			writereg(pci_ioaddr5, pci_ioaddr5 + 4,
 				IPAC_MASK, 0xFF);
 			writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
 				IPAC_MASK, 0xFF);
 			writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
 				IPAC_MASK, 0xFF);
 			writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
 				IPAC_MASK, 0xFF);
 			break;
 		case 2:
 			cs->hw.ax.base = pci_ioaddr4 + 0x08;
 			if (sct_alloc_io(pci_ioaddr4, 64))
 				return(0);
 			break;
 		case 3:
 			cs->hw.ax.base = pci_ioaddr3 + 0x10;
 			if (sct_alloc_io(pci_ioaddr3, 64))
 				return(0);
 			break;
 		case 4:
 			cs->hw.ax.base = pci_ioaddr2 + 0x20;
 			if (sct_alloc_io(pci_ioaddr2, 64))
 				return(0);
 			break;
 	}
 	/* For isac and hscx data path */
 	cs->hw.ax.data_adr = cs->hw.ax.base + 4;

 	printk(KERN_INFO "HiSax: %s (%s) configured at 0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
 	       CardType[card->typ],
 	       sct_quadro_subtypes[cs->subtyp],
 	       cs->hw.ax.plx_adr,
 	       cs->hw.ax.base,
 	       cs->hw.ax.data_adr,
 	       cs->irq);

 	test_and_set_bit(HW_IPAC, &cs->HW_Flags);

 	cs->readisac = &ReadISAC;
 	cs->writeisac = &WriteISAC;
 	cs->readisacfifo = &ReadISACfifo;
 	cs->writeisacfifo = &WriteISACfifo;

 	cs->BC_Read_Reg = &ReadHSCX;
 	cs->BC_Write_Reg = &WriteHSCX;
 	cs->BC_Send_Data = &hscx_fill_fifo;
 	cs->cardmsg = &BKM_card_msg;
 	cs->irq_func = &bkm_interrupt_ipac;

 	printk(KERN_INFO "HiSax: %s (%s): IPAC Version %d\n",
 		CardType[card->typ],
 		sct_quadro_subtypes[cs->subtyp],
 		readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
 	return (1);
 #else
 	printk(KERN_ERR "HiSax: bkm_a8 only supported on PCI Systems\n");
 #endif /* CONFIG_PCI */
 }
	/* $Id: bkm_a8.c,v 1.22.2.4 2004/01/15 14:02:34 keil Exp $
	*
	* low level stuff for Scitel Quadro (4*S0, passive)
	*
	* Author Roland Klabunde
	* Copyright by Roland Klabunde <R.Klabunde@Berkom.de>
	*
	* This software may be used and distributed according to the terms
	* of the GNU General Public License, incorporated herein by reference.
	*
	*/


	#include <linux/init.h>
	#include "hisax.h"
	#include "isac.h"
	#include "ipac.h"
	#include "hscx.h"
	#include "isdnl1.h"
	#include <linux/pci.h>
	#include "bkm_ax.h"

	#ifdef CONFIG_PCI

	#define ATTEMPT_PCI_REMAPPING /* Required for PLX rev 1 */

	extern const char *CardType[];

	static const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $";

	static const char *sct_quadro_subtypes[] =
	{
	"",
	"#1",
	"#2",
	"#3",
	"#4"
	};


	#define wordout(addr,val) outw(val,addr)
	#define wordin(addr) inw(addr)

	static inline u_char
	readreg(unsigned int ale, unsigned int adr, u_char off)
	{
	register u_char ret;
	wordout(ale, off);
	ret = wordin(adr) & 0xFF;
	return (ret);
	}

	static inline void
	readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
	{
	int i;
	wordout(ale, off);
	for (i = 0; i < size; i++)
	data[i] = wordin(adr) & 0xFF;
	}


	static inline void
	writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
	{
	wordout(ale, off);
	wordout(adr, data);
	}

	static inline void
	writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
	{
	int i;
	wordout(ale, off);
	for (i = 0; i < size; i++)
	wordout(adr, data[i]);
	}

	/* Interface functions */

	static u_char
	ReadISAC(struct IsdnCardState *cs, u_char offset)
	{
	return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset \| 0x80));
	}

	static void
	WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
	{
	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset \| 0x80, value);
	}

	static void
	ReadISACfifo(struct IsdnCardState cs, u_char data, int size)
	{
	readfifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
	}

	static void
	WriteISACfifo(struct IsdnCardState cs, u_char data, int size)
	{
	writefifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
	}


	static u_char
	ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
	{
	return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0)));
	}

	static void
	WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
	{
	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0), value);
	}

	/* Set the specific ipac to active */
	static void
	set_ipac_active(struct IsdnCardState *cs, u_int active)
	{
	/* set irq mask */
	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK,
	active ? 0xc0 : 0xff);
	}

	/*
	* fast interrupt HSCX stuff goes here
	*/

	#define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base, \
	cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
	#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base, \
	cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
	#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base, \
	cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
	#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base, \
	cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)

	#include "hscx_irq.c"

	static irqreturn_t
	bkm_interrupt_ipac(int intno, void dev_id, struct pt_regs regs)
	{
	struct IsdnCardState *cs = dev_id;
	u_char ista, val, icnt = 5;
	u_long flags;

	spin_lock_irqsave(&cs->lock, flags);
	ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
	if (!(ista & 0x3f)) { /* not this IPAC */
	spin_unlock_irqrestore(&cs->lock, flags);
	return IRQ_NONE;
	}
	Start_IPAC:
	if (cs->debug & L1_DEB_IPAC)
	debugl1(cs, "IPAC ISTA %02X", ista);
	if (ista & 0x0f) {
	val = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, HSCX_ISTA + 0x40);
	if (ista & 0x01)
	val \|= 0x01;
	if (ista & 0x04)
	val \|= 0x02;
	if (ista & 0x08)
	val \|= 0x04;
	if (val) {
	hscx_int_main(cs, val);
	}
	}
	if (ista & 0x20) {
	val = 0xfe & readreg(cs->hw.ax.base, cs->hw.ax.data_adr, ISAC_ISTA \| 0x80);
	if (val) {
	isac_interrupt(cs, val);
	}
	}
	if (ista & 0x10) {
	val = 0x01;
	isac_interrupt(cs, val);
	}
	ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
	if ((ista & 0x3f) && icnt) {
	icnt--;
	goto Start_IPAC;
	}
	if (!icnt)
	printk(KERN_WARNING "HiSax: %s (%s) IRQ LOOP\n",
	CardType[cs->typ],
	sct_quadro_subtypes[cs->subtyp]);
	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF);
	writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0);
	spin_unlock_irqrestore(&cs->lock, flags);
	return IRQ_HANDLED;
	}

	static void
	release_io_sct_quadro(struct IsdnCardState *cs)
	{
	release_region(cs->hw.ax.base & 0xffffffc0, 128);
	if (cs->subtyp == SCT_1)
	release_region(cs->hw.ax.plx_adr, 64);
	}

	static void
	enable_bkm_int(struct IsdnCardState *cs, unsigned bEnable)
	{
	if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
	if (bEnable)
	wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) \| 0x41));
	else
	wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) & ~0x41));
	}
	}

	static void
	reset_bkm(struct IsdnCardState *cs)
	{
	if (cs->subtyp == SCT_1) {
	wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) & ~4));
	mdelay(10);
	/* Remove the soft reset */
	wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) \| 4));
	mdelay(10);
	}
	}

	static int
	BKM_card_msg(struct IsdnCardState cs, int mt, void arg)
	{
	u_long flags;

	switch (mt) {
	case CARD_RESET:
	spin_lock_irqsave(&cs->lock, flags);
	/* Disable ints */
	set_ipac_active(cs, 0);
	enable_bkm_int(cs, 0);
	reset_bkm(cs);
	spin_unlock_irqrestore(&cs->lock, flags);
	return (0);
	case CARD_RELEASE:
	/* Sanity */
	spin_lock_irqsave(&cs->lock, flags);
	set_ipac_active(cs, 0);
	enable_bkm_int(cs, 0);
	spin_unlock_irqrestore(&cs->lock, flags);
	release_io_sct_quadro(cs);
	return (0);
	case CARD_INIT:
	spin_lock_irqsave(&cs->lock, flags);
	cs->debug \|= L1_DEB_IPAC;
	set_ipac_active(cs, 1);
	inithscxisac(cs, 3);
	/* Enable ints */
	enable_bkm_int(cs, 1);
	spin_unlock_irqrestore(&cs->lock, flags);
	return (0);
	case CARD_TEST:
	return (0);
	}
	return (0);
	}

	static int __devinit
	sct_alloc_io(u_int adr, u_int len)
	{
	if (!request_region(adr, len, "scitel")) {
	printk(KERN_WARNING
	"HiSax: Scitel port %#x-%#x already in use\n",
	adr, adr + len);
	return (1);
	}
	return(0);
	}

	static struct pci_dev *dev_a8 __devinitdata = NULL;
	static u16 sub_vendor_id __devinitdata = 0;
	static u16 sub_sys_id __devinitdata = 0;
	static u_char pci_bus __devinitdata = 0;
	static u_char pci_device_fn __devinitdata = 0;
	static u_char pci_irq __devinitdata = 0;

	#endif /* CONFIG_PCI */

	int __devinit
	setup_sct_quadro(struct IsdnCard *card)
	{
	#ifdef CONFIG_PCI
	struct IsdnCardState *cs = card->cs;
	char tmp[64];
	u_char pci_rev_id;
	u_int found = 0;
	u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5;

	strcpy(tmp, sct_quadro_revision);
	printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
	if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
	cs->subtyp = SCT_1; /* Preset */
	} else
	return (0);

	/* Identify subtype by para[0] */
	if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
	cs->subtyp = card->para[0];
	else {
	printk(KERN_WARNING "HiSax: %s: Invalid subcontroller in configuration, default to 1\n",
	CardType[card->typ]);
	return (0);
	}
	if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) \|\|
	(sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
	return (0);
	if (cs->subtyp == SCT_1) {
	while ((dev_a8 = pci_find_device(PCI_VENDOR_ID_PLX,
	PCI_DEVICE_ID_PLX_9050, dev_a8))) {

	sub_vendor_id = dev_a8->subsystem_vendor;
	sub_sys_id = dev_a8->subsystem_device;
	if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) &&
	(sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
	if (pci_enable_device(dev_a8))
	return(0);
	pci_ioaddr1 = pci_resource_start(dev_a8, 1);
	pci_irq = dev_a8->irq;
	pci_bus = dev_a8->bus->number;
	pci_device_fn = dev_a8->devfn;
	found = 1;
	break;
	}
	}
	if (!found) {
	printk(KERN_WARNING "HiSax: %s (%s): Card not found\n",
	CardType[card->typ],
	sct_quadro_subtypes[cs->subtyp]);
	return (0);
	}
	#ifdef ATTEMPT_PCI_REMAPPING
	/* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
	pci_read_config_byte(dev_a8, PCI_REVISION_ID, &pci_rev_id);
	if ((pci_ioaddr1 & 0x80) && (pci_rev_id == 1)) {
	printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n",
	CardType[card->typ],
	sct_quadro_subtypes[cs->subtyp]);
	/* Restart PCI negotiation */
	pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int) - 1);
	/* Move up by 0x80 byte */
	pci_ioaddr1 += 0x80;
	pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
	pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1);
	dev_a8->resource[ 1].start = pci_ioaddr1;
	}
	#endif /* End HACK */
	}
	if (!pci_irq) { /* IRQ range check ?? */
	printk(KERN_WARNING "HiSax: %s (%s): No IRQ\n",
	CardType[card->typ],
	sct_quadro_subtypes[cs->subtyp]);
	return (0);
	}
	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_1, &pci_ioaddr1);
	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_2, &pci_ioaddr2);
	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_3, &pci_ioaddr3);
	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
	pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
	if (!pci_ioaddr1 \|\| !pci_ioaddr2 \|\| !pci_ioaddr3 \|\| !pci_ioaddr4 \|\| !pci_ioaddr5) {
	printk(KERN_WARNING "HiSax: %s (%s): No IO base address(es)\n",
	CardType[card->typ],
	sct_quadro_subtypes[cs->subtyp]);
	return (0);
	}
	pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
	pci_ioaddr2 &= PCI_BASE_ADDRESS_IO_MASK;
	pci_ioaddr3 &= PCI_BASE_ADDRESS_IO_MASK;
	pci_ioaddr4 &= PCI_BASE_ADDRESS_IO_MASK;
	pci_ioaddr5 &= PCI_BASE_ADDRESS_IO_MASK;
	/* Take over */
	cs->irq = pci_irq;
	cs->irq_flags \|= IRQF_SHARED;
	/* pci_ioaddr1 is unique to all subdevices */
	/* pci_ioaddr2 is for the fourth subdevice only */
	/* pci_ioaddr3 is for the third subdevice only */
	/* pci_ioaddr4 is for the second subdevice only */
	/* pci_ioaddr5 is for the first subdevice only */
	cs->hw.ax.plx_adr = pci_ioaddr1;
	/* Enter all ipac_base addresses */
	switch(cs->subtyp) {
	case 1:
	cs->hw.ax.base = pci_ioaddr5 + 0x00;
	if (sct_alloc_io(pci_ioaddr1, 128))
	return(0);
	if (sct_alloc_io(pci_ioaddr5, 64))
	return(0);
	/* disable all IPAC */
	writereg(pci_ioaddr5, pci_ioaddr5 + 4,
	IPAC_MASK, 0xFF);
	writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
	IPAC_MASK, 0xFF);
	writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
	IPAC_MASK, 0xFF);
	writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
	IPAC_MASK, 0xFF);
	break;
	case 2:
	cs->hw.ax.base = pci_ioaddr4 + 0x08;
	if (sct_alloc_io(pci_ioaddr4, 64))
	return(0);
	break;
	case 3:
	cs->hw.ax.base = pci_ioaddr3 + 0x10;
	if (sct_alloc_io(pci_ioaddr3, 64))
	return(0);
	break;
	case 4:
	cs->hw.ax.base = pci_ioaddr2 + 0x20;
	if (sct_alloc_io(pci_ioaddr2, 64))
	return(0);
	break;
	}
	/* For isac and hscx data path */
	cs->hw.ax.data_adr = cs->hw.ax.base + 4;

	printk(KERN_INFO "HiSax: %s (%s) configured at 0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
	CardType[card->typ],
	sct_quadro_subtypes[cs->subtyp],
	cs->hw.ax.plx_adr,
	cs->hw.ax.base,
	cs->hw.ax.data_adr,
	cs->irq);

	test_and_set_bit(HW_IPAC, &cs->HW_Flags);

	cs->readisac = &ReadISAC;
	cs->writeisac = &WriteISAC;
	cs->readisacfifo = &ReadISACfifo;
	cs->writeisacfifo = &WriteISACfifo;

	cs->BC_Read_Reg = &ReadHSCX;
	cs->BC_Write_Reg = &WriteHSCX;
	cs->BC_Send_Data = &hscx_fill_fifo;
	cs->cardmsg = &BKM_card_msg;
	cs->irq_func = &bkm_interrupt_ipac;

	printk(KERN_INFO "HiSax: %s (%s): IPAC Version %d\n",
	CardType[card->typ],
	sct_quadro_subtypes[cs->subtyp],
	readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
	return (1);
	#else
	printk(KERN_ERR "HiSax: bkm_a8 only supported on PCI Systems\n");
	#endif /* CONFIG_PCI */
	}