| /* ------------------------------------------------------------------------- */ |
| /* i2c-iop3xx.c i2c driver algorithms for Intel XScale IOP3xx & IXP46x */ |
| /* ------------------------------------------------------------------------- */ |
| /* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd |
| * <Peter dot Milne at D hyphen TACQ dot com> |
| * |
| * With acknowledgements to i2c-algo-ibm_ocp.c by |
| * Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com |
| * |
| * And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund: |
| * |
| * Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund |
| * |
| * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>, |
| * Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com> |
| * |
| * Major cleanup by Deepak Saxena <dsaxena@plexity.net>, 01/2005: |
| * |
| * - Use driver model to pass per-chip info instead of hardcoding and #ifdefs |
| * - Use ioremap/__raw_readl/__raw_writel instead of direct dereference |
| * - Make it work with IXP46x chips |
| * - Cleanup function names, coding style, etc |
| * |
| * - writing to slave address causes latchup on iop331. |
| * fix: driver refuses to address self. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation, version 2. |
| */ |
| |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/errno.h> |
| #include <linux/platform_device.h> |
| #include <linux/i2c.h> |
| |
| #include <asm/io.h> |
| |
| #include "i2c-iop3xx.h" |
| |
| /* global unit counter */ |
| static int i2c_id; |
| |
| static inline unsigned char |
| iic_cook_addr(struct i2c_msg *msg) |
| { |
| unsigned char addr; |
| |
| addr = (msg->addr << 1); |
| |
| if (msg->flags & I2C_M_RD) |
| addr |= 1; |
| |
| /* |
| * Read or Write? |
| */ |
| if (msg->flags & I2C_M_REV_DIR_ADDR) |
| addr ^= 1; |
| |
| return addr; |
| } |
| |
| static void |
| iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap) |
| { |
| /* Follows devman 9.3 */ |
| __raw_writel(IOP3XX_ICR_UNIT_RESET, iop3xx_adap->ioaddr + CR_OFFSET); |
| __raw_writel(IOP3XX_ISR_CLEARBITS, iop3xx_adap->ioaddr + SR_OFFSET); |
| __raw_writel(0, iop3xx_adap->ioaddr + CR_OFFSET); |
| } |
| |
| static void |
| iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap) |
| { |
| u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE; |
| |
| /* |
| * Every time unit enable is asserted, GPOD needs to be cleared |
| * on IOP3XX to avoid data corruption on the bus. |
| */ |
| #if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X) |
| if (iop3xx_adap->id == 0) { |
| gpio_line_set(IOP3XX_GPIO_LINE(7), GPIO_LOW); |
| gpio_line_set(IOP3XX_GPIO_LINE(6), GPIO_LOW); |
| } else { |
| gpio_line_set(IOP3XX_GPIO_LINE(5), GPIO_LOW); |
| gpio_line_set(IOP3XX_GPIO_LINE(4), GPIO_LOW); |
| } |
| #endif |
| /* NB SR bits not same position as CR IE bits :-( */ |
| iop3xx_adap->SR_enabled = |
| IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD | |
| IOP3XX_ISR_RXFULL | IOP3XX_ISR_TXEMPTY; |
| |
| cr |= IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE | |
| IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE; |
| |
| __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); |
| } |
| |
| static void |
| iop3xx_i2c_transaction_cleanup(struct i2c_algo_iop3xx_data *iop3xx_adap) |
| { |
| unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); |
| |
| cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE | |
| IOP3XX_ICR_MSTOP | IOP3XX_ICR_SCLEN); |
| |
| __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); |
| } |
| |
| /* |
| * NB: the handler has to clear the source of the interrupt! |
| * Then it passes the SR flags of interest to BH via adap data |
| */ |
| static irqreturn_t |
| iop3xx_i2c_irq_handler(int this_irq, void *dev_id) |
| { |
| struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id; |
| u32 sr = __raw_readl(iop3xx_adap->ioaddr + SR_OFFSET); |
| |
| if ((sr &= iop3xx_adap->SR_enabled)) { |
| __raw_writel(sr, iop3xx_adap->ioaddr + SR_OFFSET); |
| iop3xx_adap->SR_received |= sr; |
| wake_up_interruptible(&iop3xx_adap->waitq); |
| } |
| return IRQ_HANDLED; |
| } |
| |
| /* check all error conditions, clear them , report most important */ |
| static int |
| iop3xx_i2c_error(u32 sr) |
| { |
| int rc = 0; |
| |
| if ((sr & IOP3XX_ISR_BERRD)) { |
| if ( !rc ) rc = -I2C_ERR_BERR; |
| } |
| if ((sr & IOP3XX_ISR_ALD)) { |
| if ( !rc ) rc = -I2C_ERR_ALD; |
| } |
| return rc; |
| } |
| |
| static inline u32 |
| iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap) |
| { |
| unsigned long flags; |
| u32 sr; |
| |
| spin_lock_irqsave(&iop3xx_adap->lock, flags); |
| sr = iop3xx_adap->SR_received; |
| iop3xx_adap->SR_received = 0; |
| spin_unlock_irqrestore(&iop3xx_adap->lock, flags); |
| |
| return sr; |
| } |
| |
| /* |
| * sleep until interrupted, then recover and analyse the SR |
| * saved by handler |
| */ |
| typedef int (* compare_func)(unsigned test, unsigned mask); |
| /* returns 1 on correct comparison */ |
| |
| static int |
| iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap, |
| unsigned flags, unsigned* status, |
| compare_func compare) |
| { |
| unsigned sr = 0; |
| int interrupted; |
| int done; |
| int rc = 0; |
| |
| do { |
| interrupted = wait_event_interruptible_timeout ( |
| iop3xx_adap->waitq, |
| (done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )), |
| 1 * HZ; |
| ); |
| if ((rc = iop3xx_i2c_error(sr)) < 0) { |
| *status = sr; |
| return rc; |
| } else if (!interrupted) { |
| *status = sr; |
| return -ETIMEDOUT; |
| } |
| } while(!done); |
| |
| *status = sr; |
| |
| return 0; |
| } |
| |
| /* |
| * Concrete compare_funcs |
| */ |
| static int |
| all_bits_clear(unsigned test, unsigned mask) |
| { |
| return (test & mask) == 0; |
| } |
| |
| static int |
| any_bits_set(unsigned test, unsigned mask) |
| { |
| return (test & mask) != 0; |
| } |
| |
| static int |
| iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status) |
| { |
| return iop3xx_i2c_wait_event( |
| iop3xx_adap, |
| IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD, |
| status, any_bits_set); |
| } |
| |
| static int |
| iop3xx_i2c_wait_rx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status) |
| { |
| return iop3xx_i2c_wait_event( |
| iop3xx_adap, |
| IOP3XX_ISR_RXFULL | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD, |
| status, any_bits_set); |
| } |
| |
| static int |
| iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status) |
| { |
| return iop3xx_i2c_wait_event( |
| iop3xx_adap, IOP3XX_ISR_UNITBUSY, status, all_bits_clear); |
| } |
| |
| static int |
| iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap, |
| struct i2c_msg* msg) |
| { |
| unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); |
| int status; |
| int rc; |
| |
| /* avoid writing to my slave address (hangs on 80331), |
| * forbidden in Intel developer manual |
| */ |
| if (msg->addr == MYSAR) { |
| return -EBUSY; |
| } |
| |
| __raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET); |
| |
| cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK); |
| cr |= IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE; |
| |
| __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); |
| rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status); |
| |
| return rc; |
| } |
| |
| static int |
| iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte, |
| int stop) |
| { |
| unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); |
| int status; |
| int rc = 0; |
| |
| __raw_writel(byte, iop3xx_adap->ioaddr + DBR_OFFSET); |
| cr &= ~IOP3XX_ICR_MSTART; |
| if (stop) { |
| cr |= IOP3XX_ICR_MSTOP; |
| } else { |
| cr &= ~IOP3XX_ICR_MSTOP; |
| } |
| cr |= IOP3XX_ICR_TBYTE; |
| __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); |
| rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status); |
| |
| return rc; |
| } |
| |
| static int |
| iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte, |
| int stop) |
| { |
| unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); |
| int status; |
| int rc = 0; |
| |
| cr &= ~IOP3XX_ICR_MSTART; |
| |
| if (stop) { |
| cr |= IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK; |
| } else { |
| cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK); |
| } |
| cr |= IOP3XX_ICR_TBYTE; |
| __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); |
| |
| rc = iop3xx_i2c_wait_rx_done(iop3xx_adap, &status); |
| |
| *byte = __raw_readl(iop3xx_adap->ioaddr + DBR_OFFSET); |
| |
| return rc; |
| } |
| |
| static int |
| iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, const char *buf, int count) |
| { |
| struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; |
| int ii; |
| int rc = 0; |
| |
| for (ii = 0; rc == 0 && ii != count; ++ii) |
| rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii==count-1); |
| return rc; |
| } |
| |
| static int |
| iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count) |
| { |
| struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; |
| int ii; |
| int rc = 0; |
| |
| for (ii = 0; rc == 0 && ii != count; ++ii) |
| rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii==count-1); |
| |
| return rc; |
| } |
| |
| /* |
| * Description: This function implements combined transactions. Combined |
| * transactions consist of combinations of reading and writing blocks of data. |
| * FROM THE SAME ADDRESS |
| * Each transfer (i.e. a read or a write) is separated by a repeated start |
| * condition. |
| */ |
| static int |
| iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg) |
| { |
| struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; |
| int rc; |
| |
| rc = iop3xx_i2c_send_target_addr(iop3xx_adap, pmsg); |
| if (rc < 0) { |
| return rc; |
| } |
| |
| if ((pmsg->flags&I2C_M_RD)) { |
| return iop3xx_i2c_readbytes(i2c_adap, pmsg->buf, pmsg->len); |
| } else { |
| return iop3xx_i2c_writebytes(i2c_adap, pmsg->buf, pmsg->len); |
| } |
| } |
| |
| /* |
| * master_xfer() - main read/write entry |
| */ |
| static int |
| iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, |
| int num) |
| { |
| struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; |
| int im = 0; |
| int ret = 0; |
| int status; |
| |
| iop3xx_i2c_wait_idle(iop3xx_adap, &status); |
| iop3xx_i2c_reset(iop3xx_adap); |
| iop3xx_i2c_enable(iop3xx_adap); |
| |
| for (im = 0; ret == 0 && im != num; im++) { |
| ret = iop3xx_i2c_handle_msg(i2c_adap, &msgs[im]); |
| } |
| |
| iop3xx_i2c_transaction_cleanup(iop3xx_adap); |
| |
| if(ret) |
| return ret; |
| |
| return im; |
| } |
| |
| static u32 |
| iop3xx_i2c_func(struct i2c_adapter *adap) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static const struct i2c_algorithm iop3xx_i2c_algo = { |
| .master_xfer = iop3xx_i2c_master_xfer, |
| .functionality = iop3xx_i2c_func, |
| }; |
| |
| static int |
| iop3xx_i2c_remove(struct platform_device *pdev) |
| { |
| struct i2c_adapter *padapter = platform_get_drvdata(pdev); |
| struct i2c_algo_iop3xx_data *adapter_data = |
| (struct i2c_algo_iop3xx_data *)padapter->algo_data; |
| struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| unsigned long cr = __raw_readl(adapter_data->ioaddr + CR_OFFSET); |
| |
| /* |
| * Disable the actual HW unit |
| */ |
| cr &= ~(IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE | |
| IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE); |
| __raw_writel(cr, adapter_data->ioaddr + CR_OFFSET); |
| |
| iounmap((void __iomem*)adapter_data->ioaddr); |
| release_mem_region(res->start, IOP3XX_I2C_IO_SIZE); |
| kfree(adapter_data); |
| kfree(padapter); |
| |
| platform_set_drvdata(pdev, NULL); |
| |
| return 0; |
| } |
| |
| static int |
| iop3xx_i2c_probe(struct platform_device *pdev) |
| { |
| struct resource *res; |
| int ret, irq; |
| struct i2c_adapter *new_adapter; |
| struct i2c_algo_iop3xx_data *adapter_data; |
| |
| new_adapter = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); |
| if (!new_adapter) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| adapter_data = kzalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL); |
| if (!adapter_data) { |
| ret = -ENOMEM; |
| goto free_adapter; |
| } |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| ret = -ENODEV; |
| goto free_both; |
| } |
| |
| if (!request_mem_region(res->start, IOP3XX_I2C_IO_SIZE, pdev->name)) { |
| ret = -EBUSY; |
| goto free_both; |
| } |
| |
| /* set the adapter enumeration # */ |
| adapter_data->id = i2c_id++; |
| |
| adapter_data->ioaddr = (u32)ioremap(res->start, IOP3XX_I2C_IO_SIZE); |
| if (!adapter_data->ioaddr) { |
| ret = -ENOMEM; |
| goto release_region; |
| } |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) { |
| ret = -ENXIO; |
| goto unmap; |
| } |
| ret = request_irq(irq, iop3xx_i2c_irq_handler, 0, |
| pdev->name, adapter_data); |
| |
| if (ret) { |
| ret = -EIO; |
| goto unmap; |
| } |
| |
| memcpy(new_adapter->name, pdev->name, strlen(pdev->name)); |
| new_adapter->owner = THIS_MODULE; |
| new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; |
| new_adapter->dev.parent = &pdev->dev; |
| new_adapter->nr = pdev->id; |
| |
| /* |
| * Default values...should these come in from board code? |
| */ |
| new_adapter->timeout = 100; |
| new_adapter->algo = &iop3xx_i2c_algo; |
| |
| init_waitqueue_head(&adapter_data->waitq); |
| spin_lock_init(&adapter_data->lock); |
| |
| iop3xx_i2c_reset(adapter_data); |
| iop3xx_i2c_enable(adapter_data); |
| |
| platform_set_drvdata(pdev, new_adapter); |
| new_adapter->algo_data = adapter_data; |
| |
| i2c_add_numbered_adapter(new_adapter); |
| |
| return 0; |
| |
| unmap: |
| iounmap((void __iomem*)adapter_data->ioaddr); |
| |
| release_region: |
| release_mem_region(res->start, IOP3XX_I2C_IO_SIZE); |
| |
| free_both: |
| kfree(adapter_data); |
| |
| free_adapter: |
| kfree(new_adapter); |
| |
| out: |
| return ret; |
| } |
| |
| |
| static struct platform_driver iop3xx_i2c_driver = { |
| .probe = iop3xx_i2c_probe, |
| .remove = iop3xx_i2c_remove, |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "IOP3xx-I2C", |
| }, |
| }; |
| |
| static int __init |
| i2c_iop3xx_init (void) |
| { |
| return platform_driver_register(&iop3xx_i2c_driver); |
| } |
| |
| static void __exit |
| i2c_iop3xx_exit (void) |
| { |
| platform_driver_unregister(&iop3xx_i2c_driver); |
| return; |
| } |
| |
| module_init (i2c_iop3xx_init); |
| module_exit (i2c_iop3xx_exit); |
| |
| MODULE_AUTHOR("D-TACQ Solutions Ltd <www.d-tacq.com>"); |
| MODULE_DESCRIPTION("IOP3xx iic algorithm and driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:IOP3xx-I2C"); |