blob: 6f6b26479d82281e98ff1f9998d5f472e6938201 [file] [log] [blame]
/*
* Copyright (c) 2006 Luc Verhaegen (quirks list)
* Copyright (c) 2007-2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* DDC probing routines (drm_ddc_read & drm_do_probe_ddc_edid) originally from
* FB layer.
* Copyright (C) 2006 Dennis Munsie <dmunsie@cecropia.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sub license,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#include <linux/kernel.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include "drmP.h"
#include "drm_edid.h"
/*
* TODO:
* - support EDID 1.4 (incl. CE blocks)
*/
/*
* EDID blocks out in the wild have a variety of bugs, try to collect
* them here (note that userspace may work around broken monitors first,
* but fixes should make their way here so that the kernel "just works"
* on as many displays as possible).
*/
/* First detailed mode wrong, use largest 60Hz mode */
#define EDID_QUIRK_PREFER_LARGE_60 (1 << 0)
/* Reported 135MHz pixel clock is too high, needs adjustment */
#define EDID_QUIRK_135_CLOCK_TOO_HIGH (1 << 1)
/* Prefer the largest mode at 75 Hz */
#define EDID_QUIRK_PREFER_LARGE_75 (1 << 2)
/* Detail timing is in cm not mm */
#define EDID_QUIRK_DETAILED_IN_CM (1 << 3)
/* Detailed timing descriptors have bogus size values, so just take the
* maximum size and use that.
*/
#define EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE (1 << 4)
/* Monitor forgot to set the first detailed is preferred bit. */
#define EDID_QUIRK_FIRST_DETAILED_PREFERRED (1 << 5)
/* use +hsync +vsync for detailed mode */
#define EDID_QUIRK_DETAILED_SYNC_PP (1 << 6)
static struct edid_quirk {
char *vendor;
int product_id;
u32 quirks;
} edid_quirk_list[] = {
/* Acer AL1706 */
{ "ACR", 44358, EDID_QUIRK_PREFER_LARGE_60 },
/* Acer F51 */
{ "API", 0x7602, EDID_QUIRK_PREFER_LARGE_60 },
/* Unknown Acer */
{ "ACR", 2423, EDID_QUIRK_FIRST_DETAILED_PREFERRED },
/* Belinea 10 15 55 */
{ "MAX", 1516, EDID_QUIRK_PREFER_LARGE_60 },
{ "MAX", 0x77e, EDID_QUIRK_PREFER_LARGE_60 },
/* Envision Peripherals, Inc. EN-7100e */
{ "EPI", 59264, EDID_QUIRK_135_CLOCK_TOO_HIGH },
/* Funai Electronics PM36B */
{ "FCM", 13600, EDID_QUIRK_PREFER_LARGE_75 |
EDID_QUIRK_DETAILED_IN_CM },
/* LG Philips LCD LP154W01-A5 */
{ "LPL", 0, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE },
{ "LPL", 0x2a00, EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE },
/* Philips 107p5 CRT */
{ "PHL", 57364, EDID_QUIRK_FIRST_DETAILED_PREFERRED },
/* Proview AY765C */
{ "PTS", 765, EDID_QUIRK_FIRST_DETAILED_PREFERRED },
/* Samsung SyncMaster 205BW. Note: irony */
{ "SAM", 541, EDID_QUIRK_DETAILED_SYNC_PP },
/* Samsung SyncMaster 22[5-6]BW */
{ "SAM", 596, EDID_QUIRK_PREFER_LARGE_60 },
{ "SAM", 638, EDID_QUIRK_PREFER_LARGE_60 },
};
/* Valid EDID header has these bytes */
static u8 edid_header[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 };
/**
* edid_is_valid - sanity check EDID data
* @edid: EDID data
*
* Sanity check the EDID block by looking at the header, the version number
* and the checksum. Return 0 if the EDID doesn't check out, or 1 if it's
* valid.
*/
static bool edid_is_valid(struct edid *edid)
{
int i;
u8 csum = 0;
u8 *raw_edid = (u8 *)edid;
if (memcmp(edid->header, edid_header, sizeof(edid_header)))
goto bad;
if (edid->version != 1) {
DRM_ERROR("EDID has major version %d, instead of 1\n", edid->version);
goto bad;
}
if (edid->revision > 4)
DRM_DEBUG("EDID minor > 4, assuming backward compatibility\n");
for (i = 0; i < EDID_LENGTH; i++)
csum += raw_edid[i];
if (csum) {
DRM_ERROR("EDID checksum is invalid, remainder is %d\n", csum);
goto bad;
}
return 1;
bad:
if (raw_edid) {
DRM_ERROR("Raw EDID:\n");
print_hex_dump_bytes(KERN_ERR, DUMP_PREFIX_NONE, raw_edid, EDID_LENGTH);
printk("\n");
}
return 0;
}
/**
* edid_vendor - match a string against EDID's obfuscated vendor field
* @edid: EDID to match
* @vendor: vendor string
*
* Returns true if @vendor is in @edid, false otherwise
*/
static bool edid_vendor(struct edid *edid, char *vendor)
{
char edid_vendor[3];
edid_vendor[0] = ((edid->mfg_id[0] & 0x7c) >> 2) + '@';
edid_vendor[1] = (((edid->mfg_id[0] & 0x3) << 3) |
((edid->mfg_id[1] & 0xe0) >> 5)) + '@';
edid_vendor[2] = (edid->mfg_id[1] & 0x1f) + '@';
return !strncmp(edid_vendor, vendor, 3);
}
/**
* edid_get_quirks - return quirk flags for a given EDID
* @edid: EDID to process
*
* This tells subsequent routines what fixes they need to apply.
*/
static u32 edid_get_quirks(struct edid *edid)
{
struct edid_quirk *quirk;
int i;
for (i = 0; i < ARRAY_SIZE(edid_quirk_list); i++) {
quirk = &edid_quirk_list[i];
if (edid_vendor(edid, quirk->vendor) &&
(EDID_PRODUCT_ID(edid) == quirk->product_id))
return quirk->quirks;
}
return 0;
}
#define MODE_SIZE(m) ((m)->hdisplay * (m)->vdisplay)
#define MODE_REFRESH_DIFF(m,r) (abs((m)->vrefresh - target_refresh))
/**
* edid_fixup_preferred - set preferred modes based on quirk list
* @connector: has mode list to fix up
* @quirks: quirks list
*
* Walk the mode list for @connector, clearing the preferred status
* on existing modes and setting it anew for the right mode ala @quirks.
*/
static void edid_fixup_preferred(struct drm_connector *connector,
u32 quirks)
{
struct drm_display_mode *t, *cur_mode, *preferred_mode;
int target_refresh = 0;
if (list_empty(&connector->probed_modes))
return;
if (quirks & EDID_QUIRK_PREFER_LARGE_60)
target_refresh = 60;
if (quirks & EDID_QUIRK_PREFER_LARGE_75)
target_refresh = 75;
preferred_mode = list_first_entry(&connector->probed_modes,
struct drm_display_mode, head);
list_for_each_entry_safe(cur_mode, t, &connector->probed_modes, head) {
cur_mode->type &= ~DRM_MODE_TYPE_PREFERRED;
if (cur_mode == preferred_mode)
continue;
/* Largest mode is preferred */
if (MODE_SIZE(cur_mode) > MODE_SIZE(preferred_mode))
preferred_mode = cur_mode;
/* At a given size, try to get closest to target refresh */
if ((MODE_SIZE(cur_mode) == MODE_SIZE(preferred_mode)) &&
MODE_REFRESH_DIFF(cur_mode, target_refresh) <
MODE_REFRESH_DIFF(preferred_mode, target_refresh)) {
preferred_mode = cur_mode;
}
}
preferred_mode->type |= DRM_MODE_TYPE_PREFERRED;
}
/**
* drm_mode_std - convert standard mode info (width, height, refresh) into mode
* @t: standard timing params
*
* Take the standard timing params (in this case width, aspect, and refresh)
* and convert them into a real mode using CVT.
*
* Punts for now, but should eventually use the FB layer's CVT based mode
* generation code.
*/
struct drm_display_mode *drm_mode_std(struct drm_device *dev,
struct std_timing *t)
{
struct drm_display_mode *mode;
int hsize = t->hsize * 8 + 248, vsize;
mode = drm_mode_create(dev);
if (!mode)
return NULL;
if (t->aspect_ratio == 0)
vsize = (hsize * 10) / 16;
else if (t->aspect_ratio == 1)
vsize = (hsize * 3) / 4;
else if (t->aspect_ratio == 2)
vsize = (hsize * 4) / 5;
else
vsize = (hsize * 9) / 16;
drm_mode_set_name(mode);
return mode;
}
/**
* drm_mode_detailed - create a new mode from an EDID detailed timing section
* @dev: DRM device (needed to create new mode)
* @edid: EDID block
* @timing: EDID detailed timing info
* @quirks: quirks to apply
*
* An EDID detailed timing block contains enough info for us to create and
* return a new struct drm_display_mode.
*/
static struct drm_display_mode *drm_mode_detailed(struct drm_device *dev,
struct edid *edid,
struct detailed_timing *timing,
u32 quirks)
{
struct drm_display_mode *mode;
struct detailed_pixel_timing *pt = &timing->data.pixel_data;
/* ignore tiny modes */
if (((pt->hactive_hi << 8) | pt->hactive_lo) < 64 ||
((pt->vactive_hi << 8) | pt->hactive_lo) < 64)
return NULL;
if (pt->stereo) {
printk(KERN_WARNING "stereo mode not supported\n");
return NULL;
}
if (!pt->separate_sync) {
printk(KERN_WARNING "integrated sync not supported\n");
return NULL;
}
mode = drm_mode_create(dev);
if (!mode)
return NULL;
mode->type = DRM_MODE_TYPE_DRIVER;
if (quirks & EDID_QUIRK_135_CLOCK_TOO_HIGH)
timing->pixel_clock = 1088;
mode->clock = timing->pixel_clock * 10;
mode->hdisplay = (pt->hactive_hi << 8) | pt->hactive_lo;
mode->hsync_start = mode->hdisplay + ((pt->hsync_offset_hi << 8) |
pt->hsync_offset_lo);
mode->hsync_end = mode->hsync_start +
((pt->hsync_pulse_width_hi << 8) |
pt->hsync_pulse_width_lo);
mode->htotal = mode->hdisplay + ((pt->hblank_hi << 8) | pt->hblank_lo);
mode->vdisplay = (pt->vactive_hi << 8) | pt->vactive_lo;
mode->vsync_start = mode->vdisplay + ((pt->vsync_offset_hi << 4) |
pt->vsync_offset_lo);
mode->vsync_end = mode->vsync_start +
((pt->vsync_pulse_width_hi << 4) |
pt->vsync_pulse_width_lo);
mode->vtotal = mode->vdisplay + ((pt->vblank_hi << 8) | pt->vblank_lo);
drm_mode_set_name(mode);
if (pt->interlaced)
mode->flags |= DRM_MODE_FLAG_INTERLACE;
if (quirks & EDID_QUIRK_DETAILED_SYNC_PP) {
pt->hsync_positive = 1;
pt->vsync_positive = 1;
}
mode->flags |= pt->hsync_positive ? DRM_MODE_FLAG_PHSYNC : DRM_MODE_FLAG_NHSYNC;
mode->flags |= pt->vsync_positive ? DRM_MODE_FLAG_PVSYNC : DRM_MODE_FLAG_NVSYNC;
mode->width_mm = pt->width_mm_lo | (pt->width_mm_hi << 8);
mode->height_mm = pt->height_mm_lo | (pt->height_mm_hi << 8);
if (quirks & EDID_QUIRK_DETAILED_IN_CM) {
mode->width_mm *= 10;
mode->height_mm *= 10;
}
if (quirks & EDID_QUIRK_DETAILED_USE_MAXIMUM_SIZE) {
mode->width_mm = edid->width_cm * 10;
mode->height_mm = edid->height_cm * 10;
}
return mode;
}
/*
* Detailed mode info for the EDID "established modes" data to use.
*/
static struct drm_display_mode edid_est_modes[] = {
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 40000, 800, 840,
968, 1056, 0, 600, 601, 605, 628, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@60Hz */
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 36000, 800, 824,
896, 1024, 0, 600, 601, 603, 625, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@56Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 656,
720, 840, 0, 480, 481, 484, 500, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@75Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 31500, 640, 664,
704, 832, 0, 480, 489, 491, 520, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@72Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 30240, 640, 704,
768, 864, 0, 480, 483, 486, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@67Hz */
{ DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 25200, 640, 656,
752, 800, 0, 480, 490, 492, 525, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 640x480@60Hz */
{ DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 35500, 720, 738,
846, 900, 0, 400, 421, 423, 449, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 720x400@88Hz */
{ DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 28320, 720, 738,
846, 900, 0, 400, 412, 414, 449, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 720x400@70Hz */
{ DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 135000, 1280, 1296,
1440, 1688, 0, 1024, 1025, 1028, 1066, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1280x1024@75Hz */
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 78800, 1024, 1040,
1136, 1312, 0, 768, 769, 772, 800, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1024x768@75Hz */
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 75000, 1024, 1048,
1184, 1328, 0, 768, 771, 777, 806, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 1024x768@70Hz */
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048,
1184, 1344, 0, 768, 771, 777, 806, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 1024x768@60Hz */
{ DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER,44900, 1024, 1032,
1208, 1264, 0, 768, 768, 776, 817, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_INTERLACE) }, /* 1024x768@43Hz */
{ DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 57284, 832, 864,
928, 1152, 0, 624, 625, 628, 667, 0,
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC) }, /* 832x624@75Hz */
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 49500, 800, 816,
896, 1056, 0, 600, 601, 604, 625, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@75Hz */
{ DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 50000, 800, 856,
976, 1040, 0, 600, 637, 643, 666, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 800x600@72Hz */
{ DRM_MODE("1152x864", DRM_MODE_TYPE_DRIVER, 108000, 1152, 1216,
1344, 1600, 0, 864, 865, 868, 900, 0,
DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, /* 1152x864@75Hz */
};
#define EDID_EST_TIMINGS 16
#define EDID_STD_TIMINGS 8
#define EDID_DETAILED_TIMINGS 4
/**
* add_established_modes - get est. modes from EDID and add them
* @edid: EDID block to scan
*
* Each EDID block contains a bitmap of the supported "established modes" list
* (defined above). Tease them out and add them to the global modes list.
*/
static int add_established_modes(struct drm_connector *connector, struct edid *edid)
{
struct drm_device *dev = connector->dev;
unsigned long est_bits = edid->established_timings.t1 |
(edid->established_timings.t2 << 8) |
((edid->established_timings.mfg_rsvd & 0x80) << 9);
int i, modes = 0;
for (i = 0; i <= EDID_EST_TIMINGS; i++)
if (est_bits & (1<<i)) {
struct drm_display_mode *newmode;
newmode = drm_mode_duplicate(dev, &edid_est_modes[i]);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;
}
}
return modes;
}
/**
* add_standard_modes - get std. modes from EDID and add them
* @edid: EDID block to scan
*
* Standard modes can be calculated using the CVT standard. Grab them from
* @edid, calculate them, and add them to the list.
*/
static int add_standard_modes(struct drm_connector *connector, struct edid *edid)
{
struct drm_device *dev = connector->dev;
int i, modes = 0;
for (i = 0; i < EDID_STD_TIMINGS; i++) {
struct std_timing *t = &edid->standard_timings[i];
struct drm_display_mode *newmode;
/* If std timings bytes are 1, 1 it's empty */
if (t->hsize == 1 && (t->aspect_ratio | t->vfreq) == 1)
continue;
newmode = drm_mode_std(dev, &edid->standard_timings[i]);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;
}
}
return modes;
}
/**
* add_detailed_modes - get detailed mode info from EDID data
* @connector: attached connector
* @edid: EDID block to scan
* @quirks: quirks to apply
*
* Some of the detailed timing sections may contain mode information. Grab
* it and add it to the list.
*/
static int add_detailed_info(struct drm_connector *connector,
struct edid *edid, u32 quirks)
{
struct drm_device *dev = connector->dev;
int i, j, modes = 0;
for (i = 0; i < EDID_DETAILED_TIMINGS; i++) {
struct detailed_timing *timing = &edid->detailed_timings[i];
struct detailed_non_pixel *data = &timing->data.other_data;
struct drm_display_mode *newmode;
/* EDID up to and including 1.2 may put monitor info here */
if (edid->version == 1 && edid->revision < 3)
continue;
/* Detailed mode timing */
if (timing->pixel_clock) {
newmode = drm_mode_detailed(dev, edid, timing, quirks);
if (!newmode)
continue;
/* First detailed mode is preferred */
if (i == 0 && edid->preferred_timing)
newmode->type |= DRM_MODE_TYPE_PREFERRED;
drm_mode_probed_add(connector, newmode);
modes++;
continue;
}
/* Other timing or info */
switch (data->type) {
case EDID_DETAIL_MONITOR_SERIAL:
break;
case EDID_DETAIL_MONITOR_STRING:
break;
case EDID_DETAIL_MONITOR_RANGE:
/* Get monitor range data */
break;
case EDID_DETAIL_MONITOR_NAME:
break;
case EDID_DETAIL_MONITOR_CPDATA:
break;
case EDID_DETAIL_STD_MODES:
/* Five modes per detailed section */
for (j = 0; j < 5; i++) {
struct std_timing *std;
struct drm_display_mode *newmode;
std = &data->data.timings[j];
newmode = drm_mode_std(dev, std);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;
}
}
break;
default:
break;
}
}
return modes;
}
#define DDC_ADDR 0x50
/**
* Get EDID information via I2C.
*
* \param adapter : i2c device adaptor
* \param buf : EDID data buffer to be filled
* \param len : EDID data buffer length
* \return 0 on success or -1 on failure.
*
* Try to fetch EDID information by calling i2c driver function.
*/
int drm_do_probe_ddc_edid(struct i2c_adapter *adapter,
unsigned char *buf, int len)
{
unsigned char start = 0x0;
struct i2c_msg msgs[] = {
{
.addr = DDC_ADDR,
.flags = 0,
.len = 1,
.buf = &start,
}, {
.addr = DDC_ADDR,
.flags = I2C_M_RD,
.len = len,
.buf = buf,
}
};
if (i2c_transfer(adapter, msgs, 2) == 2)
return 0;
dev_info(&adapter->dev, "unable to read EDID block.\n");
return -1;
}
EXPORT_SYMBOL(drm_do_probe_ddc_edid);
/**
* Get EDID information.
*
* \param adapter : i2c device adaptor.
* \param buf : EDID data buffer to be filled
* \param len : EDID data buffer length
* \return 0 on success or -1 on failure.
*
* Initialize DDC, then fetch EDID information
* by calling drm_do_probe_ddc_edid function.
*/
static int drm_ddc_read(struct i2c_adapter *adapter,
unsigned char *buf, int len)
{
struct i2c_algo_bit_data *algo_data = adapter->algo_data;
int i, j;
int ret = -1;
algo_data->setscl(algo_data->data, 1);
for (i = 0; i < 1; i++) {
/* For some old monitors we need the
* following process to initialize/stop DDC
*/
algo_data->setsda(algo_data->data, 1);
msleep(13);
algo_data->setscl(algo_data->data, 1);
for (j = 0; j < 5; j++) {
msleep(10);
if (algo_data->getscl(algo_data->data))
break;
}
if (j == 5)
continue;
algo_data->setsda(algo_data->data, 0);
msleep(15);
algo_data->setscl(algo_data->data, 0);
msleep(15);
algo_data->setsda(algo_data->data, 1);
msleep(15);
/* Do the real work */
ret = drm_do_probe_ddc_edid(adapter, buf, len);
algo_data->setsda(algo_data->data, 0);
algo_data->setscl(algo_data->data, 0);
msleep(15);
algo_data->setscl(algo_data->data, 1);
for (j = 0; j < 10; j++) {
msleep(10);
if (algo_data->getscl(algo_data->data))
break;
}
algo_data->setsda(algo_data->data, 1);
msleep(15);
algo_data->setscl(algo_data->data, 0);
algo_data->setsda(algo_data->data, 0);
if (ret == 0)
break;
}
/* Release the DDC lines when done or the Apple Cinema HD display
* will switch off
*/
algo_data->setsda(algo_data->data, 1);
algo_data->setscl(algo_data->data, 1);
return ret;
}
static int drm_ddc_read_edid(struct drm_connector *connector,
struct i2c_adapter *adapter,
char *buf, int len)
{
int ret;
ret = drm_ddc_read(adapter, buf, len);
if (ret != 0) {
dev_info(&connector->dev->pdev->dev, "%s: no EDID data\n",
drm_get_connector_name(connector));
goto end;
}
if (!edid_is_valid((struct edid *)buf)) {
dev_warn(&connector->dev->pdev->dev, "%s: EDID invalid.\n",
drm_get_connector_name(connector));
ret = -1;
}
end:
return ret;
}
#define MAX_EDID_EXT_NUM 4
/**
* drm_get_edid - get EDID data, if available
* @connector: connector we're probing
* @adapter: i2c adapter to use for DDC
*
* Poke the given connector's i2c channel to grab EDID data if possible.
*
* Return edid data or NULL if we couldn't find any.
*/
struct edid *drm_get_edid(struct drm_connector *connector,
struct i2c_adapter *adapter)
{
int ret;
struct edid *edid;
edid = kmalloc(EDID_LENGTH * (MAX_EDID_EXT_NUM + 1),
GFP_KERNEL);
if (edid == NULL) {
dev_warn(&connector->dev->pdev->dev,
"Failed to allocate EDID\n");
goto end;
}
/* Read first EDID block */
ret = drm_ddc_read_edid(connector, adapter,
(unsigned char *)edid, EDID_LENGTH);
if (ret != 0)
goto clean_up;
/* There are EDID extensions to be read */
if (edid->extensions != 0) {
int edid_ext_num = edid->extensions;
if (edid_ext_num > MAX_EDID_EXT_NUM) {
dev_warn(&connector->dev->pdev->dev,
"The number of extension(%d) is "
"over max (%d), actually read number (%d)\n",
edid_ext_num, MAX_EDID_EXT_NUM,
MAX_EDID_EXT_NUM);
/* Reset EDID extension number to be read */
edid_ext_num = MAX_EDID_EXT_NUM;
}
/* Read EDID including extensions too */
ret = drm_ddc_read_edid(connector, adapter, (char *)edid,
EDID_LENGTH * (edid_ext_num + 1));
if (ret != 0)
goto clean_up;
}
connector->display_info.raw_edid = (char *)edid;
goto end;
clean_up:
kfree(edid);
edid = NULL;
end:
return edid;
}
EXPORT_SYMBOL(drm_get_edid);
#define HDMI_IDENTIFIER 0x000C03
#define VENDOR_BLOCK 0x03
/**
* drm_detect_hdmi_monitor - detect whether monitor is hdmi.
* @edid: monitor EDID information
*
* Parse the CEA extension according to CEA-861-B.
* Return true if HDMI, false if not or unknown.
*/
bool drm_detect_hdmi_monitor(struct edid *edid)
{
char *edid_ext = NULL;
int i, hdmi_id, edid_ext_num;
int start_offset, end_offset;
bool is_hdmi = false;
/* No EDID or EDID extensions */
if (edid == NULL || edid->extensions == 0)
goto end;
/* Chose real EDID extension number */
edid_ext_num = edid->extensions > MAX_EDID_EXT_NUM ?
MAX_EDID_EXT_NUM : edid->extensions;
/* Find CEA extension */
for (i = 0; i < edid_ext_num; i++) {
edid_ext = (char *)edid + EDID_LENGTH * (i + 1);
/* This block is CEA extension */
if (edid_ext[0] == 0x02)
break;
}
if (i == edid_ext_num)
goto end;
/* Data block offset in CEA extension block */
start_offset = 4;
end_offset = edid_ext[2];
/*
* Because HDMI identifier is in Vendor Specific Block,
* search it from all data blocks of CEA extension.
*/
for (i = start_offset; i < end_offset;
/* Increased by data block len */
i += ((edid_ext[i] & 0x1f) + 1)) {
/* Find vendor specific block */
if ((edid_ext[i] >> 5) == VENDOR_BLOCK) {
hdmi_id = edid_ext[i + 1] | (edid_ext[i + 2] << 8) |
edid_ext[i + 3] << 16;
/* Find HDMI identifier */
if (hdmi_id == HDMI_IDENTIFIER)
is_hdmi = true;
break;
}
}
end:
return is_hdmi;
}
EXPORT_SYMBOL(drm_detect_hdmi_monitor);
/**
* drm_add_edid_modes - add modes from EDID data, if available
* @connector: connector we're probing
* @edid: edid data
*
* Add the specified modes to the connector's mode list.
*
* Return number of modes added or 0 if we couldn't find any.
*/
int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
{
int num_modes = 0;
u32 quirks;
if (edid == NULL) {
return 0;
}
if (!edid_is_valid(edid)) {
dev_warn(&connector->dev->pdev->dev, "%s: EDID invalid.\n",
drm_get_connector_name(connector));
return 0;
}
quirks = edid_get_quirks(edid);
num_modes += add_established_modes(connector, edid);
num_modes += add_standard_modes(connector, edid);
num_modes += add_detailed_info(connector, edid, quirks);
if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75))
edid_fixup_preferred(connector, quirks);
connector->display_info.serration_vsync = edid->serration_vsync;
connector->display_info.sync_on_green = edid->sync_on_green;
connector->display_info.composite_sync = edid->composite_sync;
connector->display_info.separate_syncs = edid->separate_syncs;
connector->display_info.blank_to_black = edid->blank_to_black;
connector->display_info.video_level = edid->video_level;
connector->display_info.digital = edid->digital;
connector->display_info.width_mm = edid->width_cm * 10;
connector->display_info.height_mm = edid->height_cm * 10;
connector->display_info.gamma = edid->gamma;
connector->display_info.gtf_supported = edid->default_gtf;
connector->display_info.standard_color = edid->standard_color;
connector->display_info.display_type = edid->display_type;
connector->display_info.active_off_supported = edid->pm_active_off;
connector->display_info.suspend_supported = edid->pm_suspend;
connector->display_info.standby_supported = edid->pm_standby;
connector->display_info.gamma = edid->gamma;
return num_modes;
}
EXPORT_SYMBOL(drm_add_edid_modes);