wl12xx: move partition table definition to io.c
Up till now we only needed to access the partition table in boot.c.
But to add support for reading the MAC address from the FUSE in
testmode, we will have to change the partition in testmode.c.
Thus, we move the partition table to io.c and export it via io.h. It
makes more sense to have it in the io part anyway.
Signed-off-by: Luciano Coelho <coelho@ti.com>
diff --git a/drivers/net/wireless/wl12xx/boot.c b/drivers/net/wireless/wl12xx/boot.c
index 8f9cf5a..84d2951 100644
--- a/drivers/net/wireless/wl12xx/boot.c
+++ b/drivers/net/wireless/wl12xx/boot.c
@@ -33,65 +33,6 @@
#include "event.h"
#include "rx.h"
-static struct wl1271_partition_set part_table[PART_TABLE_LEN] = {
- [PART_DOWN] = {
- .mem = {
- .start = 0x00000000,
- .size = 0x000177c0
- },
- .reg = {
- .start = REGISTERS_BASE,
- .size = 0x00008800
- },
- .mem2 = {
- .start = 0x00000000,
- .size = 0x00000000
- },
- .mem3 = {
- .start = 0x00000000,
- .size = 0x00000000
- },
- },
-
- [PART_WORK] = {
- .mem = {
- .start = 0x00040000,
- .size = 0x00014fc0
- },
- .reg = {
- .start = REGISTERS_BASE,
- .size = 0x0000a000
- },
- .mem2 = {
- .start = 0x003004f8,
- .size = 0x00000004
- },
- .mem3 = {
- .start = 0x00040404,
- .size = 0x00000000
- },
- },
-
- [PART_DRPW] = {
- .mem = {
- .start = 0x00040000,
- .size = 0x00014fc0
- },
- .reg = {
- .start = DRPW_BASE,
- .size = 0x00006000
- },
- .mem2 = {
- .start = 0x00000000,
- .size = 0x00000000
- },
- .mem3 = {
- .start = 0x00000000,
- .size = 0x00000000
- }
- }
-};
-
static void wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
{
u32 cpu_ctrl;
@@ -181,13 +122,13 @@
return -ENOMEM;
}
- memcpy(&partition, &part_table[PART_DOWN], sizeof(partition));
+ memcpy(&partition, &wl12xx_part_table[PART_DOWN], sizeof(partition));
partition.mem.start = dest;
wl1271_set_partition(wl, &partition);
/* 10.1 set partition limit and chunk num */
chunk_num = 0;
- partition_limit = part_table[PART_DOWN].mem.size;
+ partition_limit = wl12xx_part_table[PART_DOWN].mem.size;
while (chunk_num < fw_data_len / CHUNK_SIZE) {
/* 10.2 update partition, if needed */
@@ -195,7 +136,7 @@
if (addr > partition_limit) {
addr = dest + chunk_num * CHUNK_SIZE;
partition_limit = chunk_num * CHUNK_SIZE +
- part_table[PART_DOWN].mem.size;
+ wl12xx_part_table[PART_DOWN].mem.size;
partition.mem.start = addr;
wl1271_set_partition(wl, &partition);
}
@@ -383,7 +324,7 @@
nvs_len -= nvs_ptr - (u8 *)wl->nvs;
/* Now we must set the partition correctly */
- wl1271_set_partition(wl, &part_table[PART_WORK]);
+ wl1271_set_partition(wl, &wl12xx_part_table[PART_WORK]);
/* Copy the NVS tables to a new block to ensure alignment */
nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL);
@@ -492,7 +433,7 @@
wl->event_box_addr = wl1271_read32(wl, REG_EVENT_MAILBOX_PTR);
/* set the working partition to its "running" mode offset */
- wl1271_set_partition(wl, &part_table[PART_WORK]);
+ wl1271_set_partition(wl, &wl12xx_part_table[PART_WORK]);
wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
wl->cmd_box_addr, wl->event_box_addr);
@@ -769,7 +710,7 @@
wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
udelay(500);
- wl1271_set_partition(wl, &part_table[PART_DRPW]);
+ wl1271_set_partition(wl, &wl12xx_part_table[PART_DRPW]);
/* Read-modify-write DRPW_SCRATCH_START register (see next state)
to be used by DRPw FW. The RTRIM value will be added by the FW
@@ -788,7 +729,7 @@
wl1271_write32(wl, DRPW_SCRATCH_START, clk);
- wl1271_set_partition(wl, &part_table[PART_WORK]);
+ wl1271_set_partition(wl, &wl12xx_part_table[PART_WORK]);
/* Disable interrupts */
wl1271_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);