diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 3e01992..5906986 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -1,31 +1,30 @@
-/* ------------------------------------------------------------------------- */
-/* i2c-algo-pcf.c i2c driver algorithms for PCF8584 adapters		     */
-/* ------------------------------------------------------------------------- */
-/*   Copyright (C) 1995-1997 Simon G. Vogl
-                   1998-2000 Hans Berglund
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.		     */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
-   Frodo Looijaard <frodol@dds.nl> ,and also from Martin Bailey
-   <mbailey@littlefeet-inc.com> */
-
-/* Partially rewriten by Oleg I. Vdovikin <vdovikin@jscc.ru> to handle multiple
-   messages, proper stop/repstart signaling during receive,
-   added detect code */
+/*
+ * i2c-algo-pcf.c i2c driver algorithms for PCF8584 adapters
+ *
+ *   Copyright (C) 1995-1997 Simon G. Vogl
+ *		   1998-2000 Hans Berglund
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
+ * Frodo Looijaard <frodol@dds.nl>, and also from Martin Bailey
+ * <mbailey@littlefeet-inc.com>
+ *
+ * Partially rewriten by Oleg I. Vdovikin <vdovikin@jscc.ru> to handle multiple
+ * messages, proper stop/repstart signaling during receive, added detect code
+ */
 
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -38,17 +37,18 @@
 #include "i2c-algo-pcf.h"
 
 
-#define DEB2(x) if (i2c_debug>=2) x
-#define DEB3(x) if (i2c_debug>=3) x /* print several statistical values*/
-#define DEBPROTO(x) if (i2c_debug>=9) x;
- 	/* debug the protocol by showing transferred bits */
+#define DEB2(x) if (i2c_debug >= 2) x
+#define DEB3(x) if (i2c_debug >= 3) x /* print several statistical values */
+#define DEBPROTO(x) if (i2c_debug >= 9) x;
+	/* debug the protocol by showing transferred bits */
 #define DEF_TIMEOUT 16
 
-/* module parameters:
+/*
+ * module parameters:
  */
 static int i2c_debug;
 
-/* --- setting states on the bus with the right timing: ---------------	*/
+/* setting states on the bus with the right timing: */
 
 #define set_pcf(adap, ctl, val) adap->setpcf(adap->data, ctl, val)
 #define get_pcf(adap, ctl) adap->getpcf(adap->data, ctl)
@@ -57,22 +57,21 @@
 #define i2c_outb(adap, val) adap->setpcf(adap->data, 0, val)
 #define i2c_inb(adap) adap->getpcf(adap->data, 0)
 
-/* --- other auxiliary functions --------------------------------------	*/
+/* other auxiliary functions */
 
-static void i2c_start(struct i2c_algo_pcf_data *adap) 
+static void i2c_start(struct i2c_algo_pcf_data *adap)
 {
 	DEBPROTO(printk("S "));
 	set_pcf(adap, 1, I2C_PCF_START);
 }
 
-static void i2c_repstart(struct i2c_algo_pcf_data *adap) 
+static void i2c_repstart(struct i2c_algo_pcf_data *adap)
 {
 	DEBPROTO(printk(" Sr "));
 	set_pcf(adap, 1, I2C_PCF_REPSTART);
 }
 
-
-static void i2c_stop(struct i2c_algo_pcf_data *adap) 
+static void i2c_stop(struct i2c_algo_pcf_data *adap)
 {
 	DEBPROTO(printk("P\n"));
 	set_pcf(adap, 1, I2C_PCF_STOP);
@@ -82,17 +81,17 @@
 {
 	DEB2(printk(KERN_INFO
 		"i2c-algo-pcf.o: lost arbitration (CSR 0x%02x)\n",
-		 *status));
-
-	/* Cleanup from LAB -- reset and enable ESO.
+		*status));
+	/*
+	 * Cleanup from LAB -- reset and enable ESO.
 	 * This resets the PCF8584; since we've lost the bus, no
 	 * further attempts should be made by callers to clean up
 	 * (no i2c_stop() etc.)
 	 */
 	set_pcf(adap, 1, I2C_PCF_PIN);
 	set_pcf(adap, 1, I2C_PCF_ESO);
-
-	/* We pause for a time period sufficient for any running
+	/*
+	 * We pause for a time period sufficient for any running
 	 * I2C transaction to complete -- the arbitration logic won't
 	 * work properly until the next START is seen.
 	 * It is assumed the bus driver or client has set a proper value.
@@ -108,48 +107,48 @@
 		get_pcf(adap, 1)));
 }
 
-static int wait_for_bb(struct i2c_algo_pcf_data *adap) {
+static int wait_for_bb(struct i2c_algo_pcf_data *adap)
+{
 
 	int timeout = DEF_TIMEOUT;
 	int status;
 
 	status = get_pcf(adap, 1);
-#ifndef STUB_I2C
+
 	while (timeout-- && !(status & I2C_PCF_BB)) {
 		udelay(100); /* wait for 100 us */
 		status = get_pcf(adap, 1);
 	}
-#endif
-	if (timeout <= 0) {
+
+	if (timeout <= 0)
 		printk(KERN_ERR "Timeout waiting for Bus Busy\n");
-	}
-	
-	return (timeout<=0);
+
+	return timeout <= 0;
 }
 
-
-static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status) {
+static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status)
+{
 
 	int timeout = DEF_TIMEOUT;
 
 	*status = get_pcf(adap, 1);
-#ifndef STUB_I2C
+
 	while (timeout-- && (*status & I2C_PCF_PIN)) {
 		adap->waitforpin(adap->data);
 		*status = get_pcf(adap, 1);
 	}
 	if (*status & I2C_PCF_LAB) {
 		handle_lab(adap, status);
-		return(-EINTR);
+		return -EINTR;
 	}
-#endif
+
 	if (timeout <= 0)
-		return(-1);
+		return -1;
 	else
-		return(0);
+		return 0;
 }
 
-/* 
+/*
  * This should perform the 'PCF8584 initialization sequence' as described
  * in the Philips IC12 data book (1995, Aug 29).
  * There should be a 30 clock cycle wait after reset, I assume this
@@ -164,18 +163,21 @@
 {
 	unsigned char temp;
 
-	DEB3(printk(KERN_DEBUG "i2c-algo-pcf.o: PCF state 0x%02x\n", get_pcf(adap, 1)));
+	DEB3(printk(KERN_DEBUG "i2c-algo-pcf.o: PCF state 0x%02x\n",
+				get_pcf(adap, 1)));
 
 	/* S1=0x80: S0 selected, serial interface off */
 	set_pcf(adap, 1, I2C_PCF_PIN);
-	/* check to see S1 now used as R/W ctrl -
-	   PCF8584 does that when ESO is zero */
+	/*
+	 * check to see S1 now used as R/W ctrl -
+	 * PCF8584 does that when ESO is zero
+	 */
 	if (((temp = get_pcf(adap, 1)) & 0x7f) != (0)) {
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S0 (0x%02x).\n", temp));
 		return -ENXIO; /* definetly not PCF8584 */
 	}
 
-	/* load own address in S0, effective address is (own << 1)	*/
+	/* load own address in S0, effective address is (own << 1) */
 	i2c_outb(adap, get_own(adap));
 	/* check it's really written */
 	if ((temp = i2c_inb(adap)) != get_own(adap)) {
@@ -183,7 +185,7 @@
 		return -ENXIO;
 	}
 
-	/* S1=0xA0, next byte in S2					*/
+	/* S1=0xA0, next byte in S2 */
 	set_pcf(adap, 1, I2C_PCF_PIN | I2C_PCF_ES1);
 	/* check to see S2 now selected */
 	if (((temp = get_pcf(adap, 1)) & 0x7f) != I2C_PCF_ES1) {
@@ -191,7 +193,7 @@
 		return -ENXIO;
 	}
 
-	/* load clock register S2					*/
+	/* load clock register S2 */
 	i2c_outb(adap, get_clock(adap));
 	/* check it's really written, the only 5 lowest bits does matter */
 	if (((temp = i2c_inb(adap)) & 0x1f) != get_clock(adap)) {
@@ -199,7 +201,7 @@
 		return -ENXIO;
 	}
 
-	/* Enable serial interface, idle, S0 selected			*/
+	/* Enable serial interface, idle, S0 selected */
 	set_pcf(adap, 1, I2C_PCF_IDLE);
 
 	/* check to see PCF is really idled and we can access status register */
@@ -207,57 +209,47 @@
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: PCF detection failed -- can't select S1` (0x%02x).\n", temp));
 		return -ENXIO;
 	}
-	
+
 	printk(KERN_DEBUG "i2c-algo-pcf.o: detected and initialized PCF8584.\n");
 
 	return 0;
 }
 
-
-/* ----- Utility functions
- */
-
 static int pcf_sendbytes(struct i2c_adapter *i2c_adap, const char *buf,
-                         int count, int last)
+			 int count, int last)
 {
 	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
 	int wrcount, status, timeout;
-    
+
 	for (wrcount=0; wrcount<count; ++wrcount) {
 		DEB2(dev_dbg(&i2c_adap->dev, "i2c_write: writing %2.2X\n",
-				buf[wrcount]&0xff));
+				buf[wrcount] & 0xff));
 		i2c_outb(adap, buf[wrcount]);
 		timeout = wait_for_pin(adap, &status);
 		if (timeout) {
-			if (timeout == -EINTR) {
-				/* arbitration lost */
-				return -EINTR;
-			}
+			if (timeout == -EINTR)
+				return -EINTR; /* arbitration lost */
+
 			i2c_stop(adap);
 			dev_err(&i2c_adap->dev, "i2c_write: error - timeout.\n");
 			return -EREMOTEIO; /* got a better one ?? */
 		}
-#ifndef STUB_I2C
 		if (status & I2C_PCF_LRB) {
 			i2c_stop(adap);
 			dev_err(&i2c_adap->dev, "i2c_write: error - no ack.\n");
 			return -EREMOTEIO; /* got a better one ?? */
 		}
-#endif
 	}
-	if (last) {
+	if (last)
 		i2c_stop(adap);
-	}
-	else {
+	else
 		i2c_repstart(adap);
-	}
 
-	return (wrcount);
+	return wrcount;
 }
 
-
 static int pcf_readbytes(struct i2c_adapter *i2c_adap, char *buf,
-                         int count, int last)
+			 int count, int last)
 {
 	int i, status;
 	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
@@ -267,42 +259,36 @@
 	for (i = 0; i <= count; i++) {
 
 		if ((wfp = wait_for_pin(adap, &status))) {
-			if (wfp == -EINTR) {
-				/* arbitration lost */
-				return -EINTR;
-			}
+			if (wfp == -EINTR)
+				return -EINTR; /* arbitration lost */
+
 			i2c_stop(adap);
 			dev_err(&i2c_adap->dev, "pcf_readbytes timed out.\n");
-			return (-1);
+			return -1;
 		}
 
-#ifndef STUB_I2C
 		if ((status & I2C_PCF_LRB) && (i != count)) {
 			i2c_stop(adap);
 			dev_err(&i2c_adap->dev, "i2c_read: i2c_inb, No ack.\n");
-			return (-1);
+			return -1;
 		}
-#endif
-		
+
 		if (i == count - 1) {
 			set_pcf(adap, 1, I2C_PCF_ESO);
-		} else 
-		if (i == count) {
-			if (last) {
+		} else if (i == count) {
+			if (last)
 				i2c_stop(adap);
-			} else {
+			else
 				i2c_repstart(adap);
-			}
-		};
-
-		if (i) {
-			buf[i - 1] = i2c_inb(adap);
-		} else {
-			i2c_inb(adap); /* dummy read */
 		}
+
+		if (i)
+			buf[i - 1] = i2c_inb(adap);
+		else
+			i2c_inb(adap); /* dummy read */
 	}
 
-	return (i - 1);
+	return i - 1;
 }
 
 
@@ -323,14 +309,14 @@
 }
 
 static int pcf_xfer(struct i2c_adapter *i2c_adap,
-		    struct i2c_msg *msgs, 
+		    struct i2c_msg *msgs,
 		    int num)
 {
 	struct i2c_algo_pcf_data *adap = i2c_adap->algo_data;
 	struct i2c_msg *pmsg;
 	int i;
 	int ret=0, timeout, status;
-    
+
 	if (adap->xfer_begin)
 		adap->xfer_begin(adap->data);
 
@@ -338,25 +324,24 @@
 	timeout = wait_for_bb(adap);
 	if (timeout) {
 		DEB2(printk(KERN_ERR "i2c-algo-pcf.o: "
-		            "Timeout waiting for BB in pcf_xfer\n");)
+			    "Timeout waiting for BB in pcf_xfer\n");)
 		i = -EIO;
 		goto out;
 	}
-	
+
 	for (i = 0;ret >= 0 && i < num; i++) {
 		pmsg = &msgs[i];
 
 		DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: Doing %s %d bytes to 0x%02x - %d of %d messages\n",
 		     pmsg->flags & I2C_M_RD ? "read" : "write",
-                     pmsg->len, pmsg->addr, i + 1, num);)
-    
+		     pmsg->len, pmsg->addr, i + 1, num);)
+
 		ret = pcf_doAddress(adap, pmsg);
 
 		/* Send START */
-		if (i == 0) {
-			i2c_start(adap); 
-		}
-    
+		if (i == 0)
+			i2c_start(adap);
+
 		/* Wait for PIN (pending interrupt NOT) */
 		timeout = wait_for_pin(adap, &status);
 		if (timeout) {
@@ -371,8 +356,7 @@
 			i = -EREMOTEIO;
 			goto out;
 		}
-    
-#ifndef STUB_I2C
+
 		/* Check LRB (last rcvd bit - slave ack) */
 		if (status & I2C_PCF_LRB) {
 			i2c_stop(adap);
@@ -380,27 +364,24 @@
 			i = -EREMOTEIO;
 			goto out;
 		}
-#endif
-    
+
 		DEB3(printk(KERN_DEBUG "i2c-algo-pcf.o: Msg %d, addr=0x%x, flags=0x%x, len=%d\n",
 			    i, msgs[i].addr, msgs[i].flags, msgs[i].len);)
-    
-		/* Read */
+
 		if (pmsg->flags & I2C_M_RD) {
-			/* read bytes into buffer*/
 			ret = pcf_readbytes(i2c_adap, pmsg->buf, pmsg->len,
-                                            (i + 1 == num));
-        
+					    (i + 1 == num));
+
 			if (ret != pmsg->len) {
 				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: fail: "
 					    "only read %d bytes.\n",ret));
 			} else {
 				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: read %d bytes.\n",ret));
 			}
-		} else { /* Write */
+		} else {
 			ret = pcf_sendbytes(i2c_adap, pmsg->buf, pmsg->len,
-                                            (i + 1 == num));
-        
+					    (i + 1 == num));
+
 			if (ret != pmsg->len) {
 				DEB2(printk(KERN_DEBUG "i2c-algo-pcf.o: fail: "
 					    "only wrote %d bytes.\n",ret));
@@ -413,24 +394,23 @@
 out:
 	if (adap->xfer_end)
 		adap->xfer_end(adap->data);
-	return (i);
+	return i;
 }
 
 static u32 pcf_func(struct i2c_adapter *adap)
 {
-	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | 
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL |
 	       I2C_FUNC_PROTOCOL_MANGLING;
 }
 
-/* -----exported algorithm data: -------------------------------------	*/
-
+/* exported algorithm data: */
 static const struct i2c_algorithm pcf_algo = {
 	.master_xfer	= pcf_xfer,
 	.functionality	= pcf_func,
 };
 
-/* 
- * registering functions to load algorithms at runtime 
+/*
+ * registering functions to load algorithms at runtime
  */
 int i2c_pcf_add_bus(struct i2c_adapter *adap)
 {
@@ -458,4 +438,4 @@
 
 module_param(i2c_debug, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(i2c_debug,
-        "debug level - 0 off; 1 normal; 2,3 more verbose; 9 pcf-protocol");
+	"debug level - 0 off; 1 normal; 2,3 more verbose; 9 pcf-protocol");