blob: 2aca599a1ca714ae2b70ec3d6d89f2ce74dc631f [file] [log] [blame]
/***************************************************************************/
/*
* linux/arch/m68knommu/platform/5272/config.c
*
* Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com)
*/
/***************************************************************************/
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
/***************************************************************************/
void coldfire_reset(void);
extern unsigned int mcf_timervector;
extern unsigned int mcf_profilevector;
extern unsigned int mcf_timerlevel;
/***************************************************************************/
/*
* Some platforms need software versions of the GPIO data registers.
*/
unsigned short ppdata;
unsigned char ledbank = 0xff;
/***************************************************************************/
static struct mcf_platform_uart m5272_uart_platform[] = {
{
.mapbase = MCF_MBAR + MCFUART_BASE1,
.irq = 73,
},
{
.mapbase = MCF_MBAR + MCFUART_BASE2,
.irq = 74,
},
{ },
};
static struct platform_device m5272_uart = {
.name = "mcfuart",
.id = 0,
.dev.platform_data = m5272_uart_platform,
};
static struct platform_device *m5272_devices[] __initdata = {
&m5272_uart,
};
/***************************************************************************/
static void __init m5272_uart_init_line(int line, int irq)
{
u32 v;
if ((line >= 0) && (line < 2)) {
v = (line) ? 0x0e000000 : 0xe0000000;
writel(v, MCF_MBAR + MCFSIM_ICR2);
/* Enable the output lines for the serial ports */
v = readl(MCF_MBAR + MCFSIM_PBCNT);
v = (v & ~0x000000ff) | 0x00000055;
writel(v, MCF_MBAR + MCFSIM_PBCNT);
v = readl(MCF_MBAR + MCFSIM_PDCNT);
v = (v & ~0x000003fc) | 0x000002a8;
writel(v, MCF_MBAR + MCFSIM_PDCNT);
}
}
static void __init m5272_uarts_init(void)
{
const int nrlines = ARRAY_SIZE(m5272_uart_platform);
int line;
for (line = 0; (line < nrlines); line++)
m5272_uart_init_line(line, m5272_uart_platform[line].irq);
}
/***************************************************************************/
void mcf_disableall(void)
{
volatile unsigned long *icrp;
icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
icrp[0] = 0x88888888;
icrp[1] = 0x88888888;
icrp[2] = 0x88888888;
icrp[3] = 0x88888888;
}
/***************************************************************************/
void mcf_autovector(unsigned int vec)
{
/* Everything is auto-vectored on the 5272 */
}
/***************************************************************************/
void mcf_settimericr(int timer, int level)
{
volatile unsigned long *icrp;
if ((timer >= 1 ) && (timer <= 4)) {
icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
*icrp = (0x8 | level) << ((4 - timer) * 4);
}
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
#if defined (CONFIG_MOD5272)
volatile unsigned char *pivrp;
/* Set base of device vectors to be 64 */
pivrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_PIVR);
*pivrp = 0x40;
#endif
mcf_disableall();
#if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
/* Copy command line from FLASH to local buffer... */
memcpy(commandp, (char *) 0xf0004000, size);
commandp[size-1] = 0;
#elif defined(CONFIG_MTD_KeyTechnology)
/* Copy command line from FLASH to local buffer... */
memcpy(commandp, (char *) 0xffe06000, size);
commandp[size-1] = 0;
#elif defined(CONFIG_CANCam)
/* Copy command line from FLASH to local buffer... */
memcpy(commandp, (char *) 0xf0010000, size);
commandp[size-1] = 0;
#endif
mcf_timervector = 69;
mcf_profilevector = 70;
mach_reset = coldfire_reset;
}
/***************************************************************************/
static int __init init_BSP(void)
{
m5272_uarts_init();
platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
return 0;
}
arch_initcall(init_BSP);
/***************************************************************************/